Scribd
Upload
1K views1 page

Incoming Inspection Sampling Plan - Compounds

This 3 sentence summary provides the key details from the sampling plan document: The document outlines a sampling plan for incoming inspections that specifies taking random samples from rubber compound batches of various sizes and inspecting a certain number of samples based on the batch size, with acceptance criteria of zero defects allowed. If one batch is rejected, the inspection method switches to total inspection of all items in the batch according to the reference standard IS: 7086 (Part 1)-1973.

Uploaded by

quality
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views1 page

Incoming Inspection Sampling Plan - Compounds

This 3 sentence summary provides the key details from the sampling plan document: The document outlines a sampling plan for incoming inspections that specifies taking random samples from rubber compound batches of various sizes and inspecting a certain number of samples based on the batch size, with acceptance criteria of zero defects allowed. If one batch is rejected, the inspection method switches to total inspection of all items in the batch according to the reference standard IS: 7086 (Part 1)-1973.

Uploaded by

quality
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Doc No : JRP/SP/QA/01

REV. NO.: 00
SAMPLING PLAN
FOR INWARD INSPECTION DATE.: 11.11.2023
PAGE NO.: 1 of 1

Scope :
This document details

instructions that are to be followed during application of sampling plan at incoming inspection.

Ref Document:

IS: 7086 (Part 1)-1973

Sampling shall be applicable for


i ) Rubber Compound

# Batch Size Inspection Details Acceptance Creteria

1 Up to 5 2 0
2 6 to 20 5 0
3 21 to 50 10 0
4 51 to 80 13 0
5 81 to 130 16 0
6 131 and above 25 0
Note :
a. When one Batch is rejected , switchover to Total inspection

REVISON DETAILS:

PREPARED BY: CHECKED BY: APPROVED BY:

You might also like