Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    PLUS+1 Controllers: MC012-110 and MC012-112

    Uploaded by

    Calvin Jonker
    These controllers are designed for modular and expandable machine management systems. They employ 32-bit processors and FRAM memory. The MC012-112 controller includes an application key that enables use of Danfoss machine control software. Both controllers have configurable analog and digital inputs and outputs that are programmed using Danfoss GUIDE software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PLUS+1 Controllers: MC012-110 and MC012-112

    Uploaded by

    Calvin Jonker
    28 views4 pages
    These controllers are designed for modular and expandable machine management systems. They employ 32-bit processors and FRAM memory. The MC012-112 controller includes an application key that enables use of Danfoss machine control software. Both controllers have configurable analog and digital inputs and outputs that are programmed using Danfoss GUIDE software.

    Original Title

    l1301095

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    These controllers are designed for modular and expandable machine management systems. They employ 32-bit processors and FRAM memory. The MC012-112 controller includes an application key that enables use of Danfoss machine control software. Both controllers have configurable analog and digital inputs and outputs that are programmed using Danfoss GUIDE software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views4 pages

    PLUS+1 Controllers: MC012-110 and MC012-112

    Uploaded by

    Calvin Jonker
    These controllers are designed for modular and expandable machine management systems. They employ 32-bit processors and FRAM memory. The MC012-112 controller includes an application key that enables use of Danfoss machine control software. Both controllers have configurable analog and digital inputs and outputs that are programmed using Danfoss GUIDE software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Data Sheet

    PLUS+1® Controllers
    MC012-110 and MC012-112

    Mobile Machine Management


    These general purpose modular housings,
    connectors, and control circuitry are designed as
    flexible, expandable, powerful, cost effective stand
    alone modules for smaller machined systems or as
    total machine management systems with intelligence
    in every node. These modules communicate with one
    another and other intelligent systems over a machine
    Controller Area Network (CAN) data bus.

    Product Highlights
    Both controllers employ a 32 bit Cortex-M3 Processor,
    providing the controllers with extremely fast single
    cycle processing speed, and 512K internal flash. The
    MC012-112 controller has an application key that
    enables the use of Danfoss developed GUIDE machine
    control solutions. The same GUIDE HWD file is used
    with all four controllers.

    Application Development
    ®
    PLUS+1 hardware modules have input or output
    pins that support multiple functions. Pins that
    support multiple input or output types are user-
    ®
    configurable using PLUS+1 GUIDE software. This
    ® ®
    Microsoft Windows based development
    environment features a user-friendly, field proven,
    icon-based graphical programming tool, application
    downloader, and service/diagnostic tool.

    Features

    • User-programmable with PLUS+1® • 1 CAN 2.0B port, the fixed range analog developed machine control application
    GUIDE (Graphical User Integrated input can be configured as the shield software
    Development Environment) pin • CE compliant
    • ARM 32 bit Cortex-M3 running at 120 • Power supply for external sensors rated
    MHz at 5 Vdc to 100 mA and regulated
    ‒ 12 bit analog-to-digital converter internally Comprehensive technical literature online
    • at powersolutions.danfoss.com
    ‒ 16 bit timers/counters 2 LEDs under user control
    • FRAM non-volatile memory • 3 mounting alternatives: stack, end , or
    • 12 pin DEUTSCH DTM connector side
    • 9 to 36 Vdc power supply, monitored • The MC012-112 controller contains the
    internally application key required to run Danfoss

    © Danfoss | Sept 2016 AI00000155en-US0403 | 1


    Data Sheet
    MC012-110 and 112

    4 Inputs ‒ Digital: (3 A), configurable as source


    • (3) universal (DIN/AIN/FreqIN/Rheo) that or sink
    are user-defined as either: ‒ PWM: (30 to 4000 Hz), configurable
    as open or closed loop with current
    ‒ Analog: with configurable ranges 0 to
    control
    5.25 Vdc (with over range protection)
    or 0 to 36 Vdc ‒ Analog voltage: open loop PWM at
    4000 Hz
    ‒ Digital: pull up (5 Vdc), pull down (0
    • Any PWMOUT/DOUT/PVGOUT can be
    Vdc) or pull to center (2.5 Vdc)
    used to provide reference power to one
    ‒ Frequency (timing): 1 Hz to 10 kHz
    PVG valve
    ‒ Resistance: 0 to 10,000 ohm
    • (1) fixed range analog (AIN/CAN shield)
    0 to 5.25 Vdc or CAN shield pin

    2 Outputs
    • (2) universal (PWMOUT/DOUT/PVGOUT)
    that are user-defined as either:
    Specifications
    Product parameters

    Supply voltage 9 to 36 Vdc


    Operating temperature (ambient) -40°C to 70°C [-40°F to 158°F]
    Storage temperature -40°C to 85°C [-40°F to 185°F]
    Programming temperature 0°C to 70°C [32°F to 158°F]
    IP rating (with mating connector attached) IP 67
    EMI/RFI rating 100 V/M
    Weight 0.40 kg [0.88 lb]
    Vibration IEC 60068-2-64
    Shock IEC 60068-2-27 test Ea
    Maximum current, sourcing 8A
    Maximum current, sinking 8A

    2 | © Danfoss | Sept 2016 AI00000155en-US0403


    Data Sheet
    MC012-110 and 112

    Dimensions and pin assignments 12 Pin Connector

    114.4 [4.50]

    1 2 3 4 5 6
    35.3 [1.39]
    12 11 10 9 8 7
    2200B
    158.2 [6.23]

    144.5 [5.69]
    Pin Controller function
    C1-P1 Power ground -
    2 X 25.3 [1.0] C1-P2 Power ground +
    62.0 [2.44]
    C1-P3 CAN +
    107.0 [4.21] C1-P4 CAN -
    C1-P5 AIN/CAN shield
    C1-P6 5 Vdc sensor power +
    C1-P7 Sensor power ground -
    C1-P8 DIN/AIN/FreqIN/Rheo
    C1-P9 DIN/AIN/FreqIN/Rheo
    C1-P10 DIN/AIN/FreqIN/Rheo
    C1-P11 PWMOUT/DOUT/PVGOUT
    51.6 [2.03] C1-P12 PWMOUT/DOUT/PVGOUT
    47.1 [1.85]

    Use care when wiring mating connector. Pinouts listed are for
    2199A
    device pins.
    C Caution

    This device is not field serviceable. Opening the device housing


    will void the warranty.

    © Danfoss | Sept 2016 AI00000155en-US0403 | 3


    Ordering information
    Product part number
    MC012-110 part number 11130915
    MC012-112 part number 11130916

    Related products part numbers


    CG150 CAN/USB Gateway 10104136
    DEUTSCH mating 10102025 (16 to 20 10100944 (20 to 24
    connector bag assembly AWG) AWG)
    ®
    PLUS+1 GUIDE single user 10101000
    license

    Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
    already on order provided that such alterations can be made without changes being necessary in specifications already agreed.
    All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

    4 | © Danfoss | Sept 2016 AI00000155en-US0403

    You might also like