ENGINEERING MATERIAL SPECIFICATION

STEEL, CROSS REFERENCE FOR STANDARD PARTS WSD-M1A283-B1/B8

WSD-M1A283-B11
WSD-M1A283-B30
WSD-M1A283-B33
WSD-M1A283-B36/B55
WSD-M1A283-B57
NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B9/B10
NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B12/B29
NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B31/B32
NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B34/B35
NOT TO BE USED FOR NEW DESIGN WSD-M1A283-B56

1. SCOPE

The materials defined by this specification are alternative national steel specifications related to
the International Organization for Standardization classification.

2. APPLICATION

This specification was released originally to simplify material choice for fasteners which could be
sourced in several countries.

Complete compositional agreement may not exist between the alternates listed but these
differences are slight and will not significantly affect manufacture or application.

The abbreviations heading the tables indicate the following:

ISO – International Organization for Standardization

SAE – Society of Automotive Engineers International
EN – Euronorm
ASTM – American Society for Testing and Materials

3. REQUIREMENTS

The general quality of manufacture of steel and the wire product for the making of fasteners shall
conform to the relevant ISO standard or the equivalent national standard for the country of
sourcing. In the absence of a national standard or for referee purposes, the ISO standard
applies.

Specific requirements for composition, hardenability, mechanical properties and treatment

condition shall conform to the relevant national standards specified in section 3 of this
specification.

3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS

Material suppliers and part producers must conform to the Company's Standard
Requirements For Production Materials (WSS-M99P1111-A).

Date Action Revisions Rev 03

2011 04 27 Revised See summary of revisions for details S. Ryzyi, NA
2010 10 25 Revised/ N-STATUS,WSD-M1A283-B9/B10,B12-B29,B31/B32,B34/B35,B56
N-STATUS No replacement named. See Summary of Revisions. S. Ryzyi, NA
1986 07 03 Released SM/ER3665TC JPC. Lines, EAO
This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 1 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

3.2. COMPARABLE STEELS

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.06 max
ISO 4954 CC 4 X Mn: 0.35 max
Bolts, Nuts, clips, Cylinder Head Insert,
B1 EN 10016-2 C4D P: 0.030 max A
Brackets
SAE J403 UNS G10050 S: 0.050 max
Si: 0.10 max
C: 0.10 max
ISO 4954 CC 8 X Mn: 0.30-0.50
Bolts, Nuts, clips, Cylinder Head Insert,
B2 EN 10016-2 C9D P: 0.030 max A
Brackets
SAE J403 UNS G10080 S: 0.050 max
Si: 0.10 max
C: 0.08-0.13
ISO 4954 CC 11 X Mn: 0.30-0.60
Bolts, Nuts, clips, Cylinder Head Insert,
B3 EN 10016 C10D P: 0.030 max A
Brackets
SAE J403 UNS G10100 S: 0.050 max
Si: 0.10 max
C: 0.13-0.18
ISO 4954 CC 15 X Mn: 0.30-0.60
Bolts, Nuts, clips, Cylinder Head Insert,
B4 EN 10016 C15D P: 0.030 max A
Brackets
SAE J403 UNS G10150 S: 0.050 max
Si: 0.10 max
C: 0.18-0.23
ISO 4954 CC 21 K Mn: 0.30-0.60
B5 EN 10016 C20D Bolts, Nuts, clips, Brackets P: 0.030 max A
SAE J403 UNS G10200 S: 0.050 max
Si: 0.15-0.35
C: 0.18-0.23
ISO 4954 CE 20 E4 Mn: 0.70-1.00
B6 EN 10083 C22E Bolts, Nuts, clips, Brackets, Retainers P: 0.030 max A
SAE J403 UNS G10220 S: 0.050 max
Si: 0.40 max
C: 0.25-0.34
ISO 4954 CE 28 E4
Mn: 0.60-0.90
EN 10083 C30E
B7 Bolts, Nuts, Washers, P: 0.030 max A
SAE J403 UNS G10290
S: 0.050 max
SAE J403 UNS G10300
Si: 0.40 max
C: 0.32-0.39
ISO 4954 CE 35 E4 Mn: 0.50-0.80
B8 EN 10083 C35E Bolts, Nuts, Rivets, Studs P: 0.035 max A
SAE J403 UNS G10350 S: 0.035 max
Si: 0.40 max
C: 0.40-0.47
Mn: 0.60-0.90
B9 EN 10083-1 C45E Bolts, Nuts, Washers, Rivets P: 0.035 max N
S: 0.050 max
Si: 0.40 max

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 2 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.40-0.47
Mn: 0.60-0.90
EN 10083-1 C45E
B10 Nuts, Rivets, Studs P: 0.035 max N
SAE J403 UNS G10420
S: 0.050 max
Si: 0.40 max
C: 0.43-0.50
ISO 4954 CE 45 E4 Mn: 0.60-0.90
B11 EN 10083 C45E Brackets, Nuts, Washers, Bolts, Pins P: 0.035 max A
SAE J403 UNS G10450 S: 0.050 max
Si: 0.40 max
B12 DIN SEL 38Cr1 Nuts N
C: 0.44-0.49
Mn: 0.75-1.00
DIN SEL 48Cr1 P: 0.030 max
B13 Nuts N
SAE J404 UNS G50460 S: 0.040 max
Si: 0.15-0.35
Ni: 0.20-0.35
C: 0.34-0.41
Mn: 0.50-0.80
ISO 4954 37 Cr 2 E P: 0.035 max
B14 Nuts N
EN 10083 38Cr2 S: 0.035 max
Si: 0.40 max
Cr: 0.40-0.60
C: 0.42-0.50
Mn: 0.50-0.80
ISO 4954 46 Cr 2 E P: 0.035 max
B15 Nuts N
EN 10083 46Cr2 S: 0.035 max
Si: 0.40 max
Cr: 0.40-0.60
C: 0.30-0.37
Mn: 0.60-0.90
ISO 4954 34 Cr 4 E P: 0.035 max
B16 Bolts, Nuts N
EN 10083 34Cr4 S: 0.035 max
Si: 0.40 max
Cr: 0.90-1.20
C: 0.34-0.41
Mn: 0.60-0.90
ISO 4954 37 Cr 4 E P: 0.035 max
B17 Nuts N
EN 10083 37Cr4 S: 0.035 max
Si: 0.40 max
Cr: 0.90-1.20
C: 0.38-0.45
Mn: 0.60-0.90
ISO 4954 41 Cr 4 E P: 0.035 max
B18 Nuts N
EN 10083 41Cr4 S: 0.035 max
Si: 0.40 max
Cr: 0.90-1.20

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 3 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.20-0.25
Mn: 0.70-0.90
P: 0.030 max
B19 SAE J404 UNS G40230 Nuts N
S: 0.040 max
Si: 0.15-0.35
Mo: 0.20-0.30
C: 0.25-0.30
Mn: 0.70-0.90
P: 0.030 max
B20 SAE J404 UNS G40270 Screws, Retainers, Nuts N
S: 0.040 max
Si: 0.15-0.35
Mo: 0.20-0.30
C: 0.35-0.40
Mn: 0.70-0.90
ISO 4954 36 Mo 3 E
P: 0.030 max
B21 EN 10263 Type 2 Bolts, Studs, Screws, Washers, Nuts N
S: 0.040 max
SAE J404 UNS G40370
Si: 0.15-0.35
Mo: 0.20-0.30
C: 0.22-0.29
Mn: 0.60-0.90
P: 0.035 max
ISO 4954 25 CrMo 4 E
B22 Nuts S: 0.035 max N
EN 10083 25CrMo4
Si: 0.40 max
Mo: 0.15-0.30
Cr: 0.90-1.20
C: 0.33-0.38
Mn: 0.70-0.90
ISO 4954 34 CrMo 4 E P: 0.030 max
B23 EN 10083 34CrMo4 Bolts, Nuts S: 0.040 max N
SAE J404 UNS G41350 Si: 0.15-0.35
Mo: 0.15-0.25
Cr: 0.80-1.10
C: 0.38-0.43
Mn: 0.75-1.00
ISO 4954 42 CrMo 4 E
P: 0.030 max
EN 10083 42CrMo4
B24 Studs, Nuts S: 0.040 max N
SAE J404 UNS G41400
Si: 0.15-0.35
SAE J404 UNS G41420
Mo: 0.15-0.25
Cr: 0.80-1.10
C: 0.38-0.43
Mn: 0.75-1.00
ISO 4954 41 CrNiMo2E
P: 0.030 max
DIN SEL 40NiCrMo22
S: 0.040 max
B25 EN 10263 Type 7 Screws, Nuts N
Si: 0.15-0.35
SAE J404 UNS G86400
Ni: 0.40-0.70
SAE J404 UNS G87420
Mo: 0.15-0.25
Cr: 0.40-0.60
B26 ISO 4954 C41 Nuts N

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 4 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.38-0.43
Mn: 0.60-0.80
P: 0.030 max
ISO 4954 41 CrNiMo7E S: 0.040 max
B27 Screws, Washers, Nuts N
SAE J404 UNS G43400 Si: 0.15-0.35
Ni: 1.65-2.00
Mo: 0.20-0.30
Cr: 0.70-0.90
C: 0.27-0.34
Mn: 0.30-0.60
P: 0.035 max
ISO 4954 31 CrNiMo8E S: 0.035 max
B28 Nuts N
EN 10083 30CrNiMo8 Si: 0.40 max
Ni: 1.80-2.20
Mo: 0.30-0.50
Cr: 1.80-2.20
C: 0.18-0.23
ISO 4954 CE 20 B G1 Mn: 0.60-0.90
B29 EN 10263 22B2 Nuts, Bolts, Washers, Studs, Hinges P: 0.030 max N
SAE J403 UNS G10211 S: 0.050 max
B: 0.0005-0.003
C: 0.18-0.23
ISO 4954 CE 20 B G2 Mn: 0.70-1.00
B30 EN 10269 19MnB4 Hinges, Screws, Weld Nuts, Bolts P: 0.030 max A
SAE J403 UNS G10221 S: 0.050 max
B: 0.0005-0.003
C: 0.18-0.24
Mn: 1.10-1.40
B31 SAE J403 UNS G15221 Nuts P: 0.030 max N
S: 0.050 max
B: 0.0005-0.003
C: 0.25-0.31
ISO 4954 CE 28 B Mn: 0.60-0.90
B32 EN 10263 28B2 Nuts P: 0.030 max N
SAE J403 UNS G10291 S: 0.050 max
B: 0.0005-0.003
C: 0.32-0.38
ISO 4954 CE 35 B Mn: 0.60-0.90
B33 EN 10269 35B2 Plugs, Rivets, Nuts P: 0.030 max A
SAE J403 UNS G10351 S: 0.050 max
B: 0.0005-0.003

C: 0.32-0.38
Mn: 0.70-1.00
EN 10263 Type 10
P: 0.030 max
B34 EN 10087 170H36 Rivets, Plugs, Nuts N
S: 0.050 max
SAE J403 UNS G10371
B: 0.0005-0.003

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 5 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.32-0.38
Mn: 0.70-1.00
ISO 4954 35 MnB 5 E P: 0.030 max
B35 Nuts N
SAE J403 UNS G15361 S: 0.050 max
B: 0.0005-
0.003
C: 0.35-0.42
Mn: 0.60-0.90
ISO 4954 37 CrB 1 E P: 0.030 max
B36 EN 10263-4 38B2 Bolts, Washers, Nuts S: 0.050 max A
SAE J403 UNS G10381 Cr: 0.20-0.40
B: 0.0005-
0.003
C: 0.48-0.55
Mn: 0.60-0.90
ISO 683-1 C 50 E4 Brackets, Clamps, Strut Bearings, Clips, P: 0.030 max
B37 EN 10083 C50E Bushings, Retainers, Studs, Washers, S: 0.050 max A
SAE J403 UNS G10500 Bolts, Nuts, Screws, Pins Cr: 0.40 max
Mo: 0.10 max
Ni: 0.40 max
C: 0.60-0.70
Mn: 0.60-0.90
P: 0.030 max
ISO 683-1 C55 Washers, Clips, Clamps, Brackets,
S: 0.050 max
B38 EN 10016-2 C66D Retainers, Hinges, Body Trim, Screws, A
Si: 0.10-0.30
SAE J403 UNS G10650 Bolts, Nuts, Studs
Cr: 0.15 max
Mo: 0.050 max
Ni: 0.20 max
C: 0.65-0.75
Mn: 0.60-0.90
P: 0.030 max
ISO 683-1 C60
Washers, Clips, Retainers, Brackets, S: 0.050 max
B39 EN 10016-2 C70D A
Hinges, Screws, Studs, Nuts Si: 0.10-0.30
SAE J403 UNS G10700
Cr: 0.15 max
Mo: 0.050 max
Ni: 0.20 max
C: 0.13 max
Mn: 0.70-1.00
ISO 683-9 9 S 20 P: 0.070-0.12
EN 10087 11SMn30 Dowels, Plugs, Nuts, Washers, Bushings, S: 0.16-0.33
B40 A
SAE J403 UNS G12120 Bolts, Pins, Spacers, Rivets Si: 0.10-0.30
SAE J403 UNS G12130 Cr: 0.15 max
Mo: 0.050 max
Ni: 0.20 max
C: 0.15 max
Mn: 0.85-1.15
ISO 683-9 11SMnPb28 Plugs, Dowels, Ball Studs, Hinges,
P: 0.040-0.090
B41 EN 10087 11SMnPb30 Exahust Manifold Tube Connector, A
S: 0.26-0.35
SAE J403 UNS G12144 Spacers, Nuts, Pins, Bolts, Rivets
Pb: 0.15-0.35
Si: 0.05 max

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 6 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.13 max
Mn: 0.70-1.00
ISO 683-9 11SMnPb28
P: 0.07-0.12
B42 EN 10087 11SMnPb30 Plugs, Connectors, Nuts, Bolts, Pins A
S: 0.24-0.33
SAE J403 UNS G12134
Pb: 0.15-0.35
Si: 0.05 max
ISO 683-9 10 S 20
C: 0.08-0.13
EN 10087 10S20
Si: 0.15-0.40
SAE J1249 UNS
B43 Nuts, Bolts, Connectors Mn: 0.50-0.80 A
G11080
P: 0.040 max
SAE J1249 UNS
S: 0.08-0.13
G11100
C: 0.07-0.13
Mn: 0.70-1.10
ISO 683-9 10 SPb 20 Nuts, Washers, Bolts, Pins, Connectors, P: 0.06 max
B44 A
EN 10087 10SPb20 Rivets, Dowels S: 0.15-0.25
Si: 0.40 max
Pb: 0.20-0.35
C: 0.12-0.18
Mn: 0.90-1.30
ISO 683-9 10 SMn 20
B45 Nuts P: 0.06 max A
EN 10087 15SMn13
S: 0.08-0.18
Si: 0.40 max
C: 0.14-0.20
ISO 683-9 17 SMn 20 Si: 0.15-0.40
B46 SAE J1249 UNS Nuts, Bolts Mn: 1.20-1.60 A
G11160 P: 0.06 max
S: 0.15-0.25
C: 0.08-0.13
ISO 683-11 C10 Mn: 0.30-0.60
B47 EN 10016-2 C10D Bolts, Connectors, Nuts, Rivets, Washers P: 0.030 max A
SAE J403 UNS G10100 S: 0.050 max
Si: 0.10 max
C: 0.13-0.18
ISO 683-1 C 15 E4 Mn: 0.30-0.60
Bolts, Brackets, Studs, Nuts, Rivets,
B48 EN 10016-2 C15D P: 0.030 max A
Hinges, Washers, Connectors
SAE J403 UNS G10150 S: 0.050 max
Si: 0.10 max
C: 0.13-0.18
ISO 683-11 C 16 E4 Mn: 0.60-0.90
Bolts, Brackets, Studs, Nuts, Rivets,
B49 EN 10263-2 C17C P: 0.030 max A
Washers, Connectors
SAE J403 UNS G10160 S: 0.050 max
Si: 0.10 max
C: 0.65-0.75
Mn: 0.60-0.90
P: 0.030 max
EN 10016-2 C70D Brackets, Clips, Clamps, Retainers,
B50 S: 0.050 max A
SAE J403 UNS G10700 Bushings, Hinges, Nuts, Plugs
Si: 0.10-0.30
Cr: 0.15 max
Ni: 0.20 max

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 7 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

Suffix Industry Standards Typical Applications Compositiona Status

C: 0.75-0.88
Mn: 0.60-0.90
Clips, Clamps, Brackets, Hinges, P: 0.030 max
EN 10016-2 C80D
B51 Retainers, Body Trim Reinforcement, S: 0.050 max A
SAE J403 UNS G10800
Springs, Rings, Nuts, Pins Cr: 0.15 max
Si: 0.10-0.30
Ni: 0.20 max
C: 0.90-1.03
Mn: 0.30-0.50
EN 10016-2 C92D
B52 Clips, Rings, Pins, Retainers P: 0.030 max A
SAE J403 UNS G10950
S: 0.050 max
Si: 0.10 max
ISO 3573 HR2 C: 0.10 max
ISO 3574 CR2 Mn: 0.60 max
EN10139 DC03 P: 0.030 max
EN 10130 DC03 S: 0.035 max
Plugs, Brackets, Cup Plugs, Clamps, Cu: 0.20 max
B53 A
ASTM A1008/A 1008M Washers Ni: 0.20 max
CS Type A Cr: 0.15 max
Mo: 0.06 max
ASTM A1011/A 1011M V, Cb, Ti: 0.008
CS Type A max
C: 0.15 max
Mn: 0.60 max
P: 0.025 max
EN 10130 DC01 Trans Axle Shim, Clips, Door Lock
S: 0.025 max
B54 ASTM A109/A 109M Plate Reinforcement, Hinges, A
Cu: 0.20 max
Temper 4, 5 Brackets, Weld Nuts
Ni: 0.20 max
Cr: 0.15 max
Mo: 0.06 max
C: 0.51-0.59
Mn: 0.70-0.95
ISO 683-14 55Cr3
P: 0.035 max
B55 EN 10132 55Si7 Heavy series slotted spring pins A
S: 0.040 max
SAE J1249 UNS G92550
Cr: 0.70-1.00
Si: 1.80-2.20
C: 0.47-0.55
Si: 1.50-1.80
ISO 683-1 55SiCr6-3 Mn: 0.50-0.80
B56 N
EN 10089 51 Si 7 Cr: 0.50-0.80
S: 0.45 max
P: 0.45 max
C: 0.08-0.13
ISO 683-11 C 10
Brackets, Spacers, Retainers, Weld Mn: 0.30-0.60
EN 10084 C10E
B57 Studs, Cup Plugs, Bolts, Washers, P: 0.030 max A
SAE J403 UNS G10080
Pins, Clips, Nuts S: 0.050 max
SAE J403 UNS G10100
Si: 0.10 max
a
Nominal Composition, weight percent

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 8 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
 ENGINEERING MATERIAL SPECIFICATION

WSD-M1A283-B1-B57

5. SUMMARY OF REVISIONS

2011 4 27
• Removed ISO callouts in –B50 and –B51 and updated nominal composition

This study source was downloaded by 100000874382558 from CourseHero.com on 10-20-2023 10:05:36 GMT -05:00
Printed copies are uncontrolled Copyright © 2011, Ford Global Technologies, Inc. Page 9 of 9
https://www.coursehero.com/file/77308123/WSD-M1A283-B37-B38-042011pdf/
Powered by TCPDF (www.tcpdf.org)