Deltacat 2021

Catalog Navigation Guide
We have configured this online version of our catalog to take advantage of Acrobat navigation
shortcuts (links). However, these links are not visible on the pages— making them visible would
compromise the page’s readability.
• Clicking on any entry in the main Table of Contents (or the configuration listings on the first
page of each series section) will take you to the indicated page.
• Clicking on a part number in the Index will take you directly to the indicated page. (You can also
use Acrobat’s “find” command to enter a Delta part number and go directly to the page).
• Shown below are the “hot spots” on all of the product pages that will take you to background
information on various connector characteristics.
• When you use a “hot spot” to jump to another page, you can use the “back” arrow in Acrobat’s
menu bar to return to the page you jumped from.
• You can also use the Acrobat bookmarks and thumbnails to navigate by configuring your copy of
Acrobat Reader to show bookmarks or thumbnails.
In addition, the pages have been reformatted to fit within the margins of standard laser or inkjet
printers—no need to use the “shrink to fit” option when printing pages from Acrobat.
Click here to go to the Table of Contents
Click here to go to the Index by Part Number
Click on the Delta logo on any page Click on the page title to jump to the introductory
to jump to this navigation guide. page with specifications and configuration listings
for the connector series.
BNC Cable Jacks
Panel Jack - Military Clamp for Flexible Cable

C dia.
C dia.
B
B
A A
1 e r u g i F 2 e r u g i F
Cable Dimensions Mounting Plating Assembly

Fig. Delta P/N Procedure/
Group A B C Figure Body Contact Trim Code
1 1 1.75 .63 .75 33 Nickel Silver 1011-001-N330 A/20
2, 3 1 1.75 .63 .75 33 Nickel Silver 1011-004-N330 A/20
5, 6 2 1.16 .55 .50 07 Nickel Silver UG-291C/U A/17
Click here to jump to dimensions Click here to jump to the cable

for Delta mounting figures. assembly procedure for this connector.
Click here to jump to a guide to Delta cable groups.
2 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Downloaded from Arrow.com.
Delta Literature Library
Fidelity+ VITA 67 Gang Mounts Plating
Capabilities MCX & MMCX MHF / U.FL SSMC
Mil-Spec 4.1 / 9.5 SMK SMA 26.5 & 27.0
SMP & SMPM Connector Saver

Catalog Navigation Guide
We have configured this online version of our catalog to take advantage of Acrobat navigation
shortcuts (links). However, these links are not visible on the pages— making them visible would
compromise the page’s readability.
• Clicking on any entry in the main Table of Contents (or the configuration listings on the first
page of each series section) will take you to the indicated page.
• Clicking on a part number in the Index will take you directly to the indicated page. (You may also
use Acrobat’s “find” command to enter a Delta part number and go directly to the page).
• Shown below are the “hot spots” on all of the product pages that will take you to background
information on various connector characteristics.
• When using a “hot spot” to jump to another page, you can utilize the “back” arrow in Acrobat’s
menu bar to return to the page you jumped.
• You can also utilize the Acrobat bookmarks and thumbnails to navigate by configuring your copy of
Acrobat Reader to show bookmarks or thumbnails.
In addition, the pages have been reformatted to fit within the margins of standard laser or inkjet
printers—no need to use the “shrink to fit” option when printing pages from Acrobat.
Click here to go to the Table of Contents
Click here to go to the Index by Part Number
Click on the Delta logo on any page Click on the page title to jump to the introductory
to jump to this navigation guide. page with specifications and configuration listings
for the connector series.
BNC Cable Jacks
Panel Jack - Military Clamp for Flexible Cable

C dia.
C dia.
B
B
A A
Figure 1 Figure 2

1 1 1.75 .63 .75 33 Nickel Silver 1011-001-N330 A/20
2, 3 1 1.75 .63 .75 33 Nickel Silver 1011-004-N330 A/20
Click here to jump to dimensions Click here to jump to the cable

for Delta mounting figures. assembly procedure for this connector.
Click here to jump to a guide to Delta cable groups.

Contents - Click on series name to navigate.
Connector Series Size Comparison Chart SMA series
All of our product lines shown at actual size. . . . . . . . . 4 Subminiature, high-frequency connectors with
Design Features threaded mating and stainless steel bodies. . . . . . . . . . 102
Examples of how our Customer-Driven Design E-Line Brass SMA series
can help you build your products more Economical brass-body SMA connectors,
efficiently, quickly, and .............. 6 ideal for use in commercial applications . . . . . . . . . . . . . 123
BMA series SMB and SMC series
Subminiature, high-frequency connectors Subminiature, economical connectors with
with slide-on mating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 snap-on or threaded mating. . . . . . . . . . . . . . . . . . . . . . . . 130
BNC series TNC series
Miniature, economical connectors with Miniature connectors, similar in size to BNC,
bayonet-type mating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 with threaded mating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
75 Ω BNC series Polarized TNC series
For matched-impedance applications. . . . . . . . . . . . . 31 Meet FCC regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
C series TPS series
Medium-size connectors with bayonet-type Subminiature, connectors with triple-bayonet
mating and good power handling. . . . . . . . . . . . . . . . . 34 mating to prevent rocking when mated. . . . . . . . . . . . 153
G874 series TRB series
Hermaphroditic connectors with good electrical
performance; ideal for test equipment. . . . . . . . . . . . 40 Triaxial version of BNC connectors. . . . . . . . . . . . . . . . . . 156
GHV series TW34 series
Large, high-voltage connectors, threaded. . . . . . . . . 44 Medium-size connectors with threaded
mating for twinaxial cables. . . . . . . . . . . . . . . . . . . . . . . . . . 158
HN series
Medium-size connectors with threaded TWBNC series
mating and good power handling. . . . . . . . . . . . . . . . 45 Twinaxial version of BNC connectors. . . . . . . . . . . . . . . . 161
LC/LT series UHF series
Large, high-voltage connectors, threaded. . . . . . . . . . 51 Low-frequency connectors, threaded mating. . . . . . . . 163
MCX series 1.0/2.3 series
Connectors with snap-on mating, 30% smaller Subminiature DIN connectors with slide-on,
than SMB connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 snap-on, or locking mating. . . . . . . . . . . . . . . . . . . . . . . . 164
MHV series 7/16 series
Miniature, high-voltage connectors with Medium-size, versatile connectors with metric
bayonet mating (similar to BNC). . . . . . . . . . . . . . . . . . 59 threaded coupling and good power handling . . . . . . . 166
MMCX series Between-Series Adapters. . . . . . . . . . . . . . . . . 176
Microminiature connectors with snap-on mating MILQualified Products
and low RF leakage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MIL-PRF-39012 QPL connectors, and
MQD (Miniature QDS) series MIL-PRF-55339 QPL adapters. . . . . . . . . . . . . . . . . . . . . . 186
Miniature connectors with positive-locking,
quick-connect and disconnect mating. . . . . . . . . . . . 66 Mounting Figures. . . . . . . . . . . . . . . . . . . . . . . . 208
N series Cable Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Medium-size, versatile, general-purpose Cable Assembly Instructions. . . . . . . . . . . . . . 210
connectors with threaded mating. . . . . . . . . . . . . . . . . 67 Index by Part Number. . . . . . . . . . . . . . . . . . . . 217
70 Ω N series Customized Solutions
For matched-impedance applications. . . . . . . . . . . . 89 Unique designs solve difficult problems . . . . . . . . . . . . 230
QDS series Technical Information
Medium-size connectors with positive-locking, Guide to connector configurations
quick-connect and disconnect mating. . . . . . . . . . . . 92 and terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
QMA series About Delta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Subminiature, SMA-size connectors with slide-on
mating and brass bodies. . . . . . . . . . . . . . . . . . . . . . . . . 97 Ordering and Warranty. . . . . . . . . . . . . . . . . . . 236
SC series
Medium-size connectors with threaded mating
and good power handling . . . . . . . . . . . . . . . . . . . . . . . 98

Connector Sizes
Connector Size Comparison (All shown actual size)
Size categories (subminiature, miniature, etc.) are common usage, but are not industry standards.
Diameters are for reference, and may vary slightly within each series with connector configuration.
Microminiature Connectors Medium Connectors
MMCX .16 .138 MCX .192 .177
Plug Jack Plug Jack C P lug .76 Ja c k
Subminiature Connectors
3/4–20 thread
HN
1.0/2.3 .161 BMA .210
Jack Plug
.89
.312 hex 1/4 –36 thread
SMA Plug Jack Plug Jack

5/8–24 thread
SMB P lug .25 Ja c k

N P lug .79 Ja c k
.234 hex .190–32 thread

SMC P l u g Ja c k QDS
TPS Plug .39 Jack P l u gTPS 1.0 Ja c k
Miniature Connectors
BNC, 11 /16 –20 thread
TRB,
TWBNC P lug .57 Ja c k
SC P lug Ja c k
.81
MQD (Mini QDS)
Plug .69 Jack 3/4 –20 thread

TW34
MHV P lug .89 Ja c k
P lug .57 Ja c k
5/8–24 thread
7/16 –28 thread

TNC UHF P lug .76 Ja c k
P lug .60 Ja c k
More on next page

Connector Sizes
Connector Size Comparison (All shown actual size)

Size categories (subminiature, miniature, etc.) are common usage, but are not industry standards.
Diameters are for reference, and may vary slightly within each series with connector configuration.
Large Connectors
7/16
M29 x 1.5 thread
1.3
Plug Jack
G874
.99
Locking Non-Locking
GHV
3/4–20 thread
.875 hex
Plug Jack
LC and LT
1.5 hex 1 1/4 –18 thread
Plug Jack

Design Features
About Delta’s Customer-Driven Design

At Delta, Customer-Driven Design isn’t just a catchy slogan. It means that we make RF connectors that help you build
your products efficiently, quickly, and y. Because we design for your needs, nobody else can you such
a broad line of standard connectors, along with an ever-growing list of innovative, user-friendly design variations like
those detailed on these pages.
These featured connector technologies grew out of real-world requirements, and have saved our customers untold hours
and dollars over the years. And there are thousands of other special connector designs we’ve produced that we don’t
have space to include in this catalog (see the inside back cover for some examples).
So if you don’t see the exact connector configuration you need, please call us—we may have already made it. If not,
we’ll work with you to provide the connectors you need, with the best price/performance balance in the business, and
with quality and delivery that will enhance your products and production schedules.
Plating Options for Economy and Performance

(Albaloy or nickel—available for all connector series)
Silver plating has long been standard on RF connectors, but its high cost and low corrosion resistance make it less
than ideal in most applications. Nickel plating is less expensive and more durable than silver, and is standard on
many of our connectors.
However, in some applications, nickel plating can introduce unwanted intermodulation distortion, particularly on
large size connectors. For these applications, we optional Albaloy plating, a tin/zinc/copper composite with a
bright white finish, the corrosion resistance of nickel, and the low intermodulation distortion of silver plating.
Albaloy plating has the same composition as, and is fully compatible with, other commercial platings designated
Sucoplate ® , IP-23, White Bronze, and Tri-Alloy.
To order a Delta connector with plating other than the listed finish, substitute A , N , or Q in the Delta part number as below:
For silver plating: 1111111A 111-111. • For nickel plating: 1111111N 111-111. • For Albaloy plating: 1111111Q 111-111.
Note: M39012 and M55339 QPL connectors can only be supplied with the specified plating.
N Panel Receptacles With One-Piece Bodies

(Available for most type N 4-hole flange receptacles—contact factory for exact types)
Our in-house machining capability now includes production of type N

flange receptacles with one-piece bodies, replacing the old machined
body/stamped flange method. With no unsightly solder joints, these
connectors have enhanced appearance and strength compared with
two-piece designs. The machined flanges are flatter than stamped
flanges as well, and our high-speed turning centers can produce any
volume required to fill your production quantity needs.
Polarized TNC Connectors Prevent Mismating

(See page 152 for standard types)
FCC Part15.203 requirements mandate the use of a nonstandard interface in spread-spectrum wireless applications,
and further specify that the connectors must not be damaged when an attempt is made to mate them with
standard connectors. Delta’s polarized TNC plugs and jack meet
these requirements without the additional expense of other
designs, such as connectors with left-hand threads.
For systems that need more than two polarizations to prevent
mismating of connector pairs, see our unique line of keying
baskets and keyed plugs on page 149.
SMA connector pairs can also be provided with reverse polarity -
call for availability.

Design Features
Common Flange Sizes Simplify Your Production
(Available on BNC, N, SMA, TNC, and 7/16 series connectors as noted in product pages)
Does it make sense that you have to drill your components with mounting hole patterns whenever
you need to ship them with a connector series attached? We didn’t think so, either.
That’s why we a wide range of connectors in series with common flange sizes and contact/
insulator configurations. Now you can streamline your production process and shorten your delivery
cycle—just predrill your components with one mounting hole pattern, and ship them with the connectors
your customers require.
Flange Sizes and Available Interfaces

1 ⁄2 " square flange (Delta mounting figure 05)—standard flange size for SMA
.102 dia. typ.
.340
(CL ) typ.
.500
square
BNC N SMA TNC
11 ⁄ 16 " square flange (Delta mounting figure 09)—standard flange size for BNC, TNC
.125 dia. typ.
.500
(CL ) typ.
.687
square BNC N SMA TNC
1" square flange (Delta mounting figure 33)—standard flange size for type N
.125 dia. typ.
.718
(CL )
typ.
1.00 square
BNC N SMA TNC 7/16
Contact and insulator configurations are shown for illustration only—these connectors
are available with a wide variety of post, tab, solder pot, or slotted contacts.
Standard configurations are shown on product pages, and your request for a custom
design is always welcome.

Design Features
Delta Press Mount Receptacles

Available for BNC, N, and TNC connector series as noted in product pages.
Shoulder Component housing
Connector As mounted
design on component
Internal
Knurl Circuitry
Delta PressMount receptacles eliminate the need for complicated mounting hole patterns and mounting hardware.
They are simply pressed into a single through hole, and can be used in component housings as small as the outer
diameter of the connector. An integral shoulder provides a positive depth stop during mounting.
Besides the standard types shown below and in the product pages, PressMount receptacles are available with a
wide variety of contact and insulator configurations—please call if you don’t see what you need.
Standard Press Mount Receptacles
BMA plug (page 11) MCX jack (page 58) QMA jack (page 97)
BNC jack (page 27) BNC plug (page 27)
N jack (page 85) N plug (page 85)
SMA plug (page 115)

SMA jack (page 115) SMB jack (page 133)
TNC jack (page 147) TNC plug (page 147)
7/16 jack (page 171) 7/16 plug (page 173)

Design Features
Heli-Grip - Cable Attachment for Flexible Cable
Backnut; cone/contact/ Cable assembled to (Proportions altered to illustrate detail)

insulator subassembly hardware subassembly As assembled in connector
With their reduced parts count and rapid assembly, Delta’s Heli-Grip connectors you significant time savings
in your cable assembly operation, without the need for dedicated crimp tools.
Heli-Grip connectors all have captivated contacts, and assembly is easy—simply trim the cable, slide the trimmed
cable into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw the
body assembly (right) onto the backend assembly.
The assembled connectors have cable retention strength greater than the force required to tear the cable braid.
Standard Heli-Grip Configurations

BNC Series N Series TNC Series
Straight plug—page 14 Straight plug—page 138
Straight plug—page 69
Right angle plug—page 16 Straight jack—page 73 Right angle plug—page 140
Straight jack—page 17 Straight jack—page 141
Bulkhead jack—page 75
Bulkhead jack—page 19 Bulkhead jack—page 142
Panel jack—page 21 Panel jack—page 77 Panel jack—page 143

Design Features
One-Step Cable Attachment for Semi-Rigid Cable

(Available for N, SC, TNC, and 7/16 connector series as noted in product pages)
Body assembly with Solder

Cable
captive contact
and insulator
(Proportions altered to illustrate detail)
Delta One-Step connectors for semi-rigid cable have captivated contacts and insulators preassembled in the body
assembly. With no loose parts to handle, assembly is as simple as trimming the cable (and chamfering the cable
center conductor), inserting the cable into the body assembly, and soldering the cable jacket to the connector body.
The internal design of the body assembly automatically maintains the proper gap distance between the center
contact and the cable dielectric, ensuring the best electrical performance and eliminating the shimming
operation required by connectors with non-captive contacts.
Standard One-Step Configurations
N Series
S t r a i g h t p l u g —p a g e 7 0 B u l k h e a d ja c k —p a g e 7 6 P a n e l ja c k —p a g e 7 8
SMA Series
Straight plug— Right angle plug— Straight jack— Bulkhead jack— Panel jack—
page 103 page 103 page 105 page 105 page 105
Coupling Nut Options

(Available for N, SC, TNC, and 7/16 connector series as noted in product pages)
Any plug in N, SC, TNC, or 7/16 series can be supplied with a hex coupling nut for applications requiring plugs to
be torqued to a specific value. Please call for part numbers of specific connectors with hex coupling nuts, which
can be supplied with or without safety-wire holes.
Note: Delta’s standard coupling nut design for 7/16 connectors features wrench flats as well as a knurled surface for
hand-tightening, but 7/16 connectors can also be supplied with full hex coupling nuts.
N Series TNC Series 7/16 Series
Standard (left), hex (middle), Standard (left), with safety-wire Standard (left), full hex (right)
hex with safety-wire holes (right) holes (middle), hex (right)

BMA Connectors
General Description
Delta BMA series plugs are compact, high-performance connectors that mate with all standard BMA series jacks.
Designed to meet all applicable MIL-PRF-39012 requirements, they offer good electrical performance up
to 22 GHz.
These connectors are ideal for use in rack-and-panel applications.
Current configurations include PressMount plug receptacles and two- and four-hole flange panel plugs with post
contacts. New types are being added to our product line, so please call with your requirements for other BMA
configurations.
Press Mount Plug Receptacle
Component housing Delta PressMount Receptacles

These connectors eliminate the need for complicated mounting hole patterns and mounting hardware.
They are simply pressed into a single through hole, and the precisely-engineered knurled mounting
Internal section provides retention strength far greater than normal mating and unmating forces. An integral
Circuitry shoulder provides a positive stop when mounting.
.300 dia.
A
.062
B dia.
.162 dia.
.254
dia. over knurl .175
.233
Figure 1 (Brass body)
Dimensions Min. Mounting Plating

Figure Delta P/N
A B Panel Hole Body Contact
1 .187 .050 .100 .250 ±.001 dia. Nickel Gold ( C ) 4259000N911-002
Panel Plug Receptacles

.250 .330
.065 .065
.050 .050
dia.
A (CBL )
dia.
B (CL ) typ.
C
dia.
.162 dia.
C .162 dia.
typ. dia. typ.
A sq.
.390
.375 .260 .490 .390
Figure 1 (Stainless steel body) Figure 2 (Stainless steel body)
Dimensions Mounting Plating

Figure Delta P/N
A B C Figure Body Contact
1 .500 .340 .102 05 Passivated Gold ( C ) 4259000K051-000
2 .625 .481 .102 92A Passivated Gold ( C ) 4259000K911-005
• (C) in contact plating column indicates captive contact.

• See page 208 for mounting figures. • Contact factory for specifications and interface dimensions.

BNC Connectors
General Description
Delta BNC connectors are compact, economical, 50 Ω impedance connectors with two-stud bayonet coupling. They are
best suited for use with cables in the range of .150" to .250" diameter, but are available for other cables from .090" to
over .75" diameter. M39012 QPL BNC connectors and M55339 QPL BNC adapters are also included in this section. Our extensive line
ou
may need to complete your system design. Adapters between BNC and other series are shown starting page 176.
As with our other connector series, Delta’s customer-driven design results in BNC series connectors with practical and
unique features that make your design and assembly process easier. Some of these include:
• Heli-Grip cable connectors for fast, reliable assembly to flexible cable without special tooling.
• PressMount receptacles (page 27) mount securely in a single round hole, saving space on your components and
reducing your housing fabrication costs.
• Panel receptacles with flange sizes to match the same hole pattern as standard SMA or type N connectors, letting you
drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed.
• Isolated ground receptacles (see page 25).
• 75 Ω impedance BNC connectors (see page 31) for matched-impedance applications.
Our BNC series product line is still growing, so please call if you don’t see what you need.
BNC Configurations
Straight Cable Plugs ......................................................13 Bulkhead Jack Receptacles ..........................................24
Right Angle Cable Plugs ..............................................15 Bulkhead Plug Receptacles...........................................25
Straight Cable Jacks .......................................................17 Printed-Circuit Board Receptacles .............................26
Bulkhead Cable Jacks ....................................................18 Stripline Receptacles .......................................................26
Panel Cable Jacks ............................................................20 PressMount Receptacles................................................27
Panel Jack Receptacles (square flange) ..................22 Resistive Terminations ....................................................28
Right Angle Panel Jack Receptacles ........................23 Dust Caps.............................................................................28
Panel Plug Receptacles.................................................23 In-Series Adapters ............................................................29
BNC Specifications*
Electrical:
Reference
Plane Plug Interface** Nominal Impedance: 50 ohms.
.208
.228 .006 min. Frequency Range: DC–4 GHz.
Voltage Rating: 500 volts RMS.
Dielectric Withstanding Voltage: 1,500 VRMS.
Insulation Resistance: 5,000 megohms.
.190 *See .385 179 ° .463
min. below .390 181 ° .473 Materials/Finishes:
.081 Insulators: Teflon per ASTM D1710.
.087 Male Contacts: Brass per ASTM B16.
.322
max. .003 meet gage requirements Female Contacts: Beryllium Copper per ASTM B196.
.091
.210 min. of MIL-PRF-39012/16.
.097 Contact Plating: Silver - ASTM-B700
.230 Gold - MIL-DTL-45204.
.414 min. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
Jack Interface** Reference
Plane Other Metal Parts: Brass per ASTM B16
.188 Plated: Silver - ASTM B700
.346 .208 .186
.327 .206
.333 .356 Nickel - AMS-QQ-N-290.
All other specifications are in accordance with the
179 ° .432 .319 .256 .186 max. latest issues of MIL-PRF-39012, or MIL-A-55339, or
181 ° .436 .321 max. other applicable MIL specifications, and interfaces
are in accordance with MIL-STD-348.
.015 *These specifications are typical and may not apply to
.030 .075 .081
.378 .087 all connectors. Detailed specifications for individual
.382 .081
.204 .006 max. connectors are available on request.
.208
.327
.335
**Some proportions altered to illustrate detail.

BNC Cable Plugs
Straight Plug - Military Clamp For Flexible Cable

B dia.
B dia.
Figure 1 Figure 2
A
A
Cable Dimensions Plating Assembly Procedure/

Figure Delta P/N
Group A B Body Contact Trim Code
1 1 1.16 .560 Nickel Silver 1001001N000-001 C/06
2, 3 1 1.66 .750 Nickel Silver UG-959A/U A/01
2, 3 1 1.66 .750 Silver Gold ( C ) M39012/16-0225 A/01
5, 6 2 1.03 .440 Nickel Silver UG-88/U C/04
5, 6 2 1.06 .500 Nickel Silver UG-88C/U A/17
5, 6 2 1.06 .500 Nickel Silver UG-88E/U A/17
5, 6 2 1.06 .500 Nickel Gold ( C ) 1001015N001-000 A/17
5, 6 2 1.06 .500 Silver Gold ( C ) M39012/16-0101 A/17
7 2 1.03 .440 Nickel Silver UG-260/U C/04
7 2 1.06 .500 Nickel Silver UG-260B/U A/17
7 2 1.06 .500 Nickel Silver UG-260D/U A/17
7 2 1.06 .500 Nickel Silver ( C ) 1001021N001-000 A/17
7 2 1.06 .500 Silver Gold ( C ) M39012/16-0102 A/17
8A 2 1.06 .500 Nickel Silver UG-1033C/U A/17
8A 2 1.06 .500 Nickel Silver ( C ) 1001029N001-000 A/17
8A 2 1.06 .500 Silver Gold ( C ) M39012/16-0103 A/17
8B 2 1.06 .500 Nickel Silver 1001043N000-000 A/17
8B 2 1.06 .500 Nickel Silver ( C ) 1001043N001-000 A/17
9 2 1.06 .500 Nickel Silver 1001036N000-000 A/18
9 2 1.06 .500 Silver Gold ( C ) M39012/16-0220 A/37
11 2 1.06 .500 Nickel Silver 1001038N000-000 A/18
22 2 1.06 .500 Silver Gold ( C ) M39012/16-0118 A/17
23 2 1.06 .500 Silver Gold ( C ) M39012/16-0111 A/17
25 2 1.06 .500 Nickel Silver 1001132N000-000 A/17
Straight Plug - Solder Clamp For Semi-Rigid Cable

B dia.
Figure 1
A
Figure Delta P/N
13 1 1.06 .500 Nickel* Silver 1001031N003-000 F/08
14 1 1.06 .500 Nickel* Silver 1001025N003-000 F/07
* Solder ferrule is gold plated.

• See page 209 for cable groups. • Assembly procedures start on page 210.
• (C) in contact plating column indicates captive contact. • See page 6 for alternate body plating information.

BNC Cable Plugs
Straight Plug - Heli-Grip® For Flexible Cable
B dia. Heli-Grip® Cable Attachment
A These connectors have captivated contacts and allow

rapid, easy assembly—simply trim the cable, slide into
Figure 1 the cone/insulator/contact assembly (left), solder the
center conductor to the contact, and screw body assembly
(right) onto cable assembly.

Figure Delta P/N
6§
§ 5, 1 1.06 .500 Nickel Silver ( C) 1001018N005-000 E/03
RG-223 1 1.06 .500 Nickel Silver ( C) 1001015N005-003 E/03
7 1 1.06 .500 Nickel Silver ( C) 1001019N005-000 E/03
8A 1 1.06 .500 Nickel Silver ( C) 1001029N005-001 E/03
8B 1 1.06 .500 Nickel Silver ( C) 1001043N005-000 E/03
§Except RG-223/U.
Straight Plug - Crimp Type For Flexible Cable

B
(crimp sleeve) B
(crimp
sleeve)
A A
Figure 1 Figure 2

Figure Delta P/N
3A, 4 1 1.72 .630 Nickel Gold ( C) 1003005N000-000 B/11
5 2 1.09 .500 Nickel Gold 1003017N000-000 B/18
5 2 1.10 .500 Nickel Gold ( C) 1003017N00E-002 B/19
6 2 1.09 .500 Nickel Gold 1003013N000-000 B/18
6 2 1.10 .500 Nickel Gold ( C) 1003013N00E-000 B/19
7 2 1.09 .500 Nickel Gold 1003020N000-002 B/18
7 2 1.10 .500 Nickel Gold ( C) 1003019N00E-002 B/19
7 2 1.05 .410 Nickel Silver 1003020N000-005 * ***
7 2 1.05 .410 Nickel Gold 1003020N000-006 * ***
7 2 1.05 .500 Nickel Silver ( C) 1003020N001-005 * ***
7 2 1.05 .500 Nickel Gold ( C) 1003020N001-009 * ***
9 2 .940 .310 Nickel Silver ( C) 1003037N000-000 B/20
* Crimp center contact.
• ***Contact factory for cable assembly instructions.

BNC Cable Plugs
Right Angle Plug - Military Clamp For Flexible Cable
A
B A
B
C dia. B
C dia.
C dia.
Figure 1 Figure 2 Figure 3

Figure Delta P/N
Group A B C Body Contact Trim Code
1 1 1.23 1.92 .750 Nickel Gold 1004001N000-000 A/07
2, 3 1 1.23 1.92 .750 Nickel Silver 1004004N000-000 A/07
5, 6 2 1.09 1.61 .500 Nickel Silver UG-913/U A/17
5, 6 2 1.09 1.61 .500 Nickel Silver UG-913A/U A/17
5, 6 2 1.09 1.61 .500 Nickel Silver ( C) 1004015N001-000 A/17
5, 6 2 1.09 1.61 .500 Silver Gold ( C) M39012/20-0101 A/17
5, 6 3 1.25 1.06 .440 Nickel Silver ( C) 1005014N000-000 C/05
7 2 1.09 1.61 .500 Nickel Silver 1004021N000-000 A/17
7 2 1.09 1.61 .500 Nickel Silver ( C) 1004021N001-000 A/17
7 2 1.09 1.61 .500 Silver Gold ( C) M39012/20-0102 A/17
7 3 1.25 1.06 .440 Nickel Silver ( C) 1005021N000-001 C/05
8A 3 1.25 1.06 .440 Nickel Silver ( C) 1005029N000-000 C/05
8B 2 1.09 1.61 .500 Nickel Silver 1004043N000-000 A/17
9 2 1.09 1.61 .500 Nickel Silver 1004036N000-000 A/18
9 3 1.25 1.06 .440 Nickel Silver ( C) 1005036N000-000 C/05
22 2 1.09 1.61 .500 Silver Gold ( C) M39012/20-0108 A/17
Right Angle Plug - Solder Clamp For Semi-Rigid Cable
A
C dia.
Figure 1

Figure Delta P/N
13 1 1.09 1.61 .500 Nickel* Silver 1004031N003-000 F/08
14 1 1.09 1.61 .500 Nickel* Silver 1004025N003-000 F/07

BNC Cable Plugs
Right Angle Plug - Heli-Grip® For Flexible Cable

A
Heli-Grip® Cable Attachment
These connectors have captivated contacts and allow

C dia. rapid, easy assembly—simply trim the cable, slide into
the cone/insulator/contact assembly (left), solder the
Figure 1

Figure Delta P/N
§ 5, 6 § 1 1.09 1.61 .500 Nickel Silver ( C) 1004018N005-000 E/03
RG-223 1 1.09 1.61 .500 Nickel Silver ( C) 1004015N005-000 E/03
7 1 1.09 1.61 .500 Nickel Silver ( C) 1004019N005-000 E/03
8A 1 1.09 1.61 .500 Nickel Silver ( C) 1004029N005-000 E/03
8B 1 1.09 1.61 .500 Nickel Silver ( C) 1004043N005-000 E/03
§Except RG-223/U.
Right Angle Plug - Crimp Type For Flexible Cable
C
(crimp sleeve)
Figure 1

Figure Delta P/N
5 1 1.03 1.71 .500 Nickel Gold ( C ) 1007017N000-003 B/02
6 1 1.03 1.71 .500 Nickel Silver 1007015N000-000 B/02
7 1 1.03 1.71 .500 Nickel Gold 1007019N000-001 B/02

BNC Cable Jacks
Straight Jacks - For Flexible & Semi-Rigid Cable
B dia.
B dia.
B
A A
A Figure 2 Figure 3
Figure 1

Military Clamp For Flexible Cable

Figure Delta P/N
2, 3 1 1.75 .750 Nickel Silver 1008004N000-000 A/20
5, 6 2 1.16 .500 Nickel Silver UG-89C/U A/17
5, 6 2 1.16 .500 Nickel Gold ( C ) 1008015N001-000 A/17
5, 6 2 1.16 .500 Silver Gold ( C ) M39012/17-0101 A/17
7 2 1.16 .500 Nickel Silver UG-261C/U A/17
7 2 1.16 .500 Silver Gold ( C ) M39012/17-0102 A/17
8A 2 1.16 .500 Silver Gold ( C ) M39012/17-0103 A/17
9 2 1.16 .500 Nickel Silver 1008036N000-000 A/18
11 2 1.16 .500 Nickel Silver 1008038N000-000 A/18
22 2 1.16 .500 Silver Gold ( C ) M39012/17-0118 A/17
23 2 1.16 .500 Silver Gold ( C ) M39012/17-0111 A/17
Heli-Grip For Flexible Cable
5, 6 § 2 1.16 .500 Nickel Silver ( C ) 1008018N005-001 E/03
RG-223 2 1.16 .500 Nickel Silver ( C ) 1008015N005-000 E/03
7 2 1.16 .500 Nickel Silver ( C ) 1008019N005-000 E/03
8A 2 1.16 .500 Nickel Silver ( C ) 1008029N005-000 E/03
8B 2 1.16 .500 Nickel Silver ( C ) 1008043N005-000 E/03
Crimp Type For Flexible Cable
5 3 1.16 .500 Nickel Gold 1010017N000-001 B/05
6 3 1.16 .500 Nickel Gold 1010013N000-000 B/05
7 3 1.16 .500 Nickel Gold 1010020N000-000 B/05
7 3 1.06 .410 Nickel Silver 1010020N001-001 ** ***
Solder-Clamp For Semi-Rigid Cable
13 2 1.16 .500 Nickel* Silver 1008031N003-000 F/08
14 2 1.16 .500 Nickel* Silver 1008025N003-000 F/07
§Except RG-223/U. *Solder ferrule is gold plated.
• **Indicates crimp center contact. • ***Contact factory for cable assembly instructions.

BNC Cable Jacks
Bulkhead Jacks - Military Clamp For Flexible Cable
C dia.
C dia.
B .687
1.00 hex
A hex
B
A
Figure 1 Figure 2
(Rear mount) (Rear mount)
C dia. C dia.
.625 B .625 B
hex A dia. A
Figure 3 Figure 4
(Front mount) (Front mount)
Cable Dimensions Mounting Max. Plating Assembly

Group A B C Figure Panel Body Contact Trim Code
2, 3 1 1.55 .920 .750 51 .110 Nickel Gold ( C) 1016004N511-000 A/20
5, 6 2 1.16 .680 .500 59 .110 Nickel Silver UG-909/U A/17
5, 6 2 1.16 .680 .500 59 .110 Nickel Silver UG-909A/U A/17
5, 6 2 1.16 .810 .500 59 .240 Nickel Silver UG-909B/U A/17
5, 6 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0101 A/17
5, 6 2 1.16 .680 .500 59 .110 Nickel Gold ( C) 1016015N591-000 A/17
5, 6 3 1.14 .550 .440 57 .090 Nickel Silver 1017014N570-000 C/04
7 2 1.16 .680 .500 59 .110 Nickel Silver UG-910/U A/17
7 2 1.16 .680 .500 59 .110 Nickel Silver UG-910A/U A/17
7 2 1.16 .810 .500 59 .240 Nickel Silver UG-910B/U A/17
7 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0102 A/17
7 2 1.16 .680 .500 59 .110 Nickel Silver ( C) 1016021N591-000 A/17
7 4 1.14 .550 .440 57 .090 Nickel Silver UG-624/U C/04
8A 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0110 A/17
9 2 1.16 .680 .500 59 .110 Nickel Silver 1016036N590-000 A/18
9 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0220 A/17
11 2 1.16 .680 .500 59 .110 Nickel Silver 1016038N590-000 A/18
22 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0118 A/17
23 2 1.16 .810 .500 59 .240 Silver Gold ( C) M39012/19-0111 A/17
• See page 209 for cable groups. • Assembly procedures start on page 210. • See page 208 for mounting dimensions.

BNC Cable Jacks
Bulkhead Jack - Heli-Grip® For Flexible Cable
C dia. Heli-Grip® Cable Attachment
These connectors have captivated contacts and allow rapid, easy

B .687 assembly—simply trim the cable, slide into the cone/insulator/contact
A hex assembly (left), solder the center conductor to the contact, and screw
body assembly (right) onto cable assembly.
Figure 1 (Rear mount)

§5, 6 § 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1016018N595-000 E/03
RG-223 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1016015N595-000 E/03
7 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1016019N595-000 E/03
8A 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1016029N595-000 E/03
8B 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1016043N595-000 E/03
§Except RG-223/U.
Bulkhead Jack - Crimp Type For Flexible Cable
Figure 1
(Rear mount)
C
(crimp sleeve)
B .687 hex
A
5 1 1.31 .680 .500 59 .110 Nickel Silver 1019016N590-000 B/21
6 1 1.31 .680 .500 59 .110 Nickel Silver 1019013N590-000 B/21
7 1 1.31 .680 .500 59 .110 Nickel Silver 1019020N590-000 B/22
Bulkhead Jack - Solder Clamp For Semi-Rigid Cable

C dia.
Figure 1
(Rear mount)
B .687 hex
A

13 1 1.16 .810 .500 59 .240 Nickel* Silver 1016031N593-000 F/08
14 1 1.16 .810 .500 59 .240 Nickel* Silver 1016025N593-000 F/07

BNC Cable Jacks
Panel Jack- Military Clamp For Flexible Cable
C dia. C dia.
B B
A
A
Figure 2
Figure 1

1 1 1.75 .630 .750 33 Nickel Silver 1011001N330-000 A/20
2, 3 1 1.75 .630 .750 33 Nickel Silver 1011004N330-000 A/20
5, 6 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0102 A/17
5, 6 2 1.16 .550 .500 07 Nickel Gold ( C) 1011015N071-000 A/17
7 2 1.16 .550 .500 07 Nickel Silver UG-262C/U A/17
7 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0101 A/17
7 2 1.16 .550 .500 07 Nickel Silver ( C) 1011021N071-000 A/17
8A 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0103 A/17
9 2 1.16 .550 .500 07 Nickel Silver 1011036N070-000 A/18
9 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0220 A/38
11 2 1.16 .550 .500 07 Nickel Silver 1011038N070-000 A/18
22 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0118 A/17
23 2 1.16 .550 .500 07 Silver Gold ( C) M39012/18-0111 A/17
Panel Jack - Solder-Clamp For Semi-Rigid Cable
C dia.
B
A
Figure 1

13 1 1.16 .550 .500 07 Nickel* Gold 1011031N073-000 F/08
14 1 1.16 .550 .500 07 Nickel* Gold 1011025N073-000 F/07

BNC Cable Jacks
Panel Jack- Heli-Grip® For Flexible Cable

center conductor to the contact, and screw body
assembly (right) onto the cable assembly.
C dia.
B
A
Figure 1

§5, 6 § 1 1.16 .550 .500 07 Nickel Silver ( C) 1011018N075-000 E/03
RG-223 1 1.16 .550 .500 07 Nickel Silver ( C) 1011015N075-000 E/03
7 1 1.16 .550 .500 07 Nickel Silver ( C) 1011019N075-000 E/03
8A 1 1.16 .550 .500 07 Nickel Silver ( C) 1011029N075-000 E/03
8B 1 1.16 .550 .500 07 Nickel Silver ( C) 1011043N075-000 E/03
§Except RG-223/U.
Panel Jack - Crimp Type for Flexible Cable
C
(crimp sleeve)
B
A
Figure 1

5 1 1.22 .630 .500 09 Nickel Gold ( C ) 1055017N091-000 B/12
6 1 1.22 .630 .500 09 Nickel Gold ( C ) 1055015N091-000 B/12
7 1 1.22 .630 .500 09 Nickel Gold ( C ) 1055019N091-000 B/12

BNC Receptacles
Panel Jack Receptacles - Sqaure Flange
C C ( I.D. )
D
B B
A A
Figure 1 Figure 2
(Turret contact) (Solder pot contact)
D .161 dia. B
C ( I.D. ) .050
dia.
B C
A D A
Figure 3 Figure 4
(Solder pot contact, 1" square flange, (Post contact)
interchangeable with type N standard flange size)
.275 .161 dia.

dia. B .050 dia.
.085 B
dia.
C C
D A D A
Figure 5 Figure 6
(Post contact) (Post contact, 1/ 2 " square flange,
interchangeable with SMA standard flange size)

Figure Delta P/N
A B C D Figure Body Contact
1 1.06 .550 .050 .— 18 Nickel Silver ( C) UG-185/U
2 1.06 .630 .062 .090 07 Nickel Silver ( C) UG-290A/U
2 1.06 .630 .043 .090 12 Nickel Silver ( C) UG-447/U
2 1.06 .630 .062 .090 07 Silver Gold ( C) M39012/22-0001
2 1.06 .630 .062 .090 09 Nickel Silver ( C) 1013000N090-000
2 1.06 .630 .062 .090 10 Nickel Silver ( C) 1013000N100-000
2 1.06 .630 .062 .090 18 Nickel Gold ( C) 1013000N180-000
2 1.00 .750 .062 .080 18 § Nickel Gold ( C) 1013000F181-000 **
3 1.06 .630 .062 .080 33 Nickel Silver ( C) 1013000N330-000
4 .715 .090 .175 .375 09 Nickel Silver ( C) 1058000N091-000
5 .750 .080 .590 .705 18 § Nickel Gold ( C) * 1058000N181-001
6 .750 .080 .590 .705 05 Nickel Gold ( C) 1058000N051-000
• (C) in contact plating column indicates captive contact. • *Indicates epoxy-captivated contact. • **Insulator flush with rear of flange.
• §Flange #18 except with .125 dia. mounting holes. • See page 6 for alternate body plating information.
• See page 208 for mounting dimensions. • All items are available with other flange sizes and contact configurations.

BNC Receptacles
Right Angle Panel Jack Receptacles - Sqaure Flange
C
C
D ( I.D. ) D ( I.D. )
A A
B B
Figure 1 Figure 2
(Solder pot contact) (Solder pot contact, 1" square flange,

Figure Delta P/N
1 1.06 .910 .650 .062 07 Nickel Silver ( C) 1015000N070-000
1 1.06 .910 .650 .062 09 Nickel Gold ( C) 1015000N090-000
2 1.22 .910 .610 .062 33 Nickel Silver ( C) 1015000N330-000
Panel Plug Receptacles - Sqaure Flange
D D
C ( I.D. ) C ( I.D. )
B B
A A
Figure 1 Figure 2
(Solder pot contact, 3/ 4" square flange) (Solder pot contact, 1" square flange,

Figure Delta P/N
2 1.19 .800 .062 .080 33 Nickel Silver ( C) 1023000N330-000
Dummy Receptacles
B
A
Dimensions Plating
Mounting Figure Delta P/N
A B B ody Con t a ct
. 7 50 . 090 09 N ick e l — 1063000N090-000

BNC Receptacles
Bulkhead Jack Receptacles
C ( I.D. ) C ( I.D. )
.500 B .570 B
dia. A dia. A
Figure 1 Figure 2
(Front mount) (Front mount, pressurized [non-
hermetic], with mounting gasket)
C ( I.D. ) C ( I.D. )
B .687 .594 B
A dia. dia. A
Figure 4
Figure 3 (Front mount, hermetically sealed,
(Rear mount, hermetically sealed, with mounting gasket)
with mounting gasket)
.594 C
dia.
.062 ( I.D. )
B
Figure 5
(Right angle, solder pot contact)
Dimensions Max. Mounting Plating

Figure Delta P/N
A B C Panel Figure Body Contact
1 1.06 .490 .062 .130 62 Nickel Silver ( C) UG-625B/U
1 1.06 .490 .062 .130 62 Silver Gold ( C) M39012/21-0001
1 1.19 .470 .062 .260 65 Silver Gold ( C) M39012/21-0002
1 1.19 .470 .062 .260 62 Silver Gold ( C) M39012/21-0003
3 1.20 .830 .062 .260 59 Silver Gold ( C) M39012/24-0001
4 1.20 .520 .062 .260 63 Silver Gold ( C) M39012/24-0002
5 .920 1.22 .590 .130 63 Nickel Silver ( C) UG-1098/U
5 .920 1.34 .590 .250 63 Nickel Silver ( C) UG-1098A/U
5 .920 1.22 .590 .130 62 Nickel Silver ( C) UG-1174/U

BNC Receptacles
Bulkhead Jack Receptacles With Solder Lug
.042
dia.
.625 dia. Grounding lug
Figure 1
(Standard grounding)
C ( I.D. )
B
A
Isolated-Ground Receptacles
Panel
Connector body
mounting components
Isolating insulator
.562 hex A
Primary insulator
C ( I.D. )
Grounding lug
Grounding
.042 lug B
dia.
These receptacles feature an additional insulator

Figure 2 between the main connector body and the body’s
(Isolated ground) mounting surfaces, electrically isolating the ground
signal of the circuit from the panel. The circuit ground
signal is passed through the panel via the solder lug for
termination inside the equipment. Since they are not
a triaxial connector design, isolated-ground receptacles
can be used with any standard BNC plugs.

Figure Delta P/N
1 1.06 .750 .062 .170 59 Nickel Gold ( C) 1021000N591-000
2 1.06 .500 .062 .170 59 Nickel Gold ( C) 1020000F59G-000
Bulkhead Plug Receptacles
C ( I.D. )
Figure 1
(Front mount)
Bulkhead Plug Receptacle
B
A

Figure Delta P/N
1 1.25 .690 .062 .160 65 Nickel Silver ( C ) 1024000N651-000

BNC Receptacles
Receptacles For Printed Circuit Boards
.038 dia. typ. C

.040 sq. typ. C
D dia. D dia.
.500 .687
sq. sq.
B
.400 typ. A B
.500 typ. A
Figure 1 Figure 2
.040 sq. typ. B

C C
.30 D D dia.
typ.
.030 .500
.45 dia. sq.
dia.
A
B .400 typ.
.040 sq. typ.
A
Figure 3 Figure 4
.038 dia. typ. C B
D dia.
.687
sq.
A
.500 typ.
Figure 5
Dimensions Max. Board Mounting Plating
Figure Delta P/N
A B C D Thickness Figure Body Contact
1 .660 .040 .116 .040 .063 PCB01 Nickel Gold ( C) 1058000N04P-000
1 1.15 .040 .116 .040 .063 PCB01 Nickel Gold ( C) 1058000N04P-001
3 1.03 .050 .125 .160 .063 PCB03 Nickel Silver ( C) 1067000N91P-001
4 1.06 .575 .116 .040 .063 PCB01 Nickel Gold ( C) 1069000N03P-000
Stripline Receptacles
8 holes, A dia. x B deep .63 dia. C holes, A dia. x B deep H
D .085 dia.
E
C dia. b.c. .750 D
dia. dia. b.c.
F
.120 dia.
Socket contact E dia. x F deep H
G .875 dia. G
Figure 1 Figure 2
Dimensions P la t ing
Figure Delta P/N
A B C D E F G H Body Contact
1 .078 .310 .500 .063 .063 .220 .828 .375 Nickel Gold (C) 1056000N000-000
2 #2-56 .125 10 .734 .125 .010 .710 .125 Nickel Gold 1057000N000-000
• See page 208 for mounting dimensions.

BNC Receptacles
Press Mount Receptacles

These connectors eliminate the need for complicated
Component housing mounting hole patterns and mounting hardware.
They are simply pressed into a single through hole,
and the precisely-engineered knurled mounting section
provides retention strength far greater than normal
mating and unmating forces. An integral shoulder
provides a positive stop when mounting.
Internal
Circuitry PressMounts are available for a wide variety of Delta
connector series, and can be used in packages as small
as the outer diameter of the connector body.
.43 dia. .600 .43 dia. .600

A A
B dia. B ( I.D. )
.316 .316 .083 dia.
dia. over knurl .175 dia. over knurl .175
Figure 1 Figure 2
(Post contact) (Solder pot contact)
.625 dia. .600 .625 dia. .860

A A
B dia. B dia.
.454 .25 .454 .25
dia. over knurl dia. over knurl
Figure 3 Figure 4
(Post contact) (Plug type, post contact)

Figure Delta P/N
1 .062 .050 .150 .312 ±.001 dia. Nickel Silver ( C) 1020000N911-001
2 .285 .062 .150 .312 ±.001 dia. Nickel Silver ( C) 1020000N911-002
3 .060 .050 .200 .450 ±.001 dia. Nickel Gold ( C) 1020000N911-013
• All items are available with other flange sizes and contact configurations.

BNC Accessories
Resistive Termination (Plug Type)
A
C ( I.D. )
Dimensions Plating
Resistor Features Delta P/N
A B C Body Contact
51 Ω ±5%, 1/2 W att 1. 25 3. 50 . 144 Nickel Gold ( C) MX-554/U
51 Ω ±5%, 1/2 W att 1. 41 3. 50 . 144 Nickel Silver ( C) MX-554A/U
51 Ω ±5%, 1/2 Watt 1.14 .— .— No chain Nickel Gold ( C) 1031000N00A-003
51 Ω ±5%, 1 W att 1. 50 4. 50 . 130 Nickel Silver ( C) 1051000N000-000
51 Ω ±5%, 1 Watt 1.39 .— .— No chain Nickel Silver ( C) 1051000N00A-005
75 Ω ±5%, 1/2 W a t t 1. 41 3. 50 . 144 Nickel Silver ( C) 1031000N000-004
75 Ω ±5%, 1/2 Watt 1.14 .— .— No chain Nickel Gold ( C) 1031000N00A-001
75 Ω ±5%, 1 Watt 1.39 .— .— No chain Nickel Silver ( C) 1051000N00A-002
Dust Caps
A A
C ( I.D. ) C ( I.D. )
B
B
Figure 1 Figure 2
(Shown with bead chain) (Shown with safety chain)
Dimensions Plating
Figure Features Delta P/N
A B C Body Contact
1 .670 2.25 .144 Bead chain Nickel — CW-123A/U
1 .590 .— .— No chain Nickel — CW-155A/U
1 .690 2.25 .144 Bead chain / shorting type Nickel Silver ( C ) CW-159/U
1 .670 2.25 .144 Bead chain Silver — M39012/25-0006
1 .670 2.70 .520 Safety chain Silver — M39012/25-0007
2 .690 3.25 .281 Bead chain Nickel — CW-282/U
• Caps and terminations are available with other chain styles and/or resistances.

BNC Adapters
Bulkhead Jack-Jack Adapter
(Connects Two Plugs)
B C dia.
A

Delta P/N
1.53 .860 .690 .275 59 Nickel Silver ( C) UG-492A/U *
1.53 .860 .690 .275 59 Nickel Silver ( C) UG-492C/U *
1.53 .860 .690 .275 59 Nickel Silver ( C) UG-492D/U *
1.53 .860 .690 .275 59 Silver Gold ( C) M55339/13-00492 *
1.28 .800 .625 .160 59 Nickel Silver ( C) 1026000N591-000
* Hermetically sealed, with mounting gasket.
Panel Mounted Jack-Jack Adapter

B
A
Dimensions Plating
A B Body Contact
1. 28 . 6 90 07 Nickel Silver ( C) UG-414A/U
Straight Jack-Jack Adapter

B dia.
Dimensions Plating
Delta P/N
A B Body Contact
1.28 .440 Nickel Silver ( C) UG-914/U
1.28 .440 Silver Gold ( C) M55339/16-00914
1.28 .440 Nickel Gold ( C) 1028000N001-003

BNC Adapters
Straight Plug-Plug Adapter Straight Plug-Jack Adapter
(Connects Two Jacks) (Connects One Jack & One Plug)
1.22 1.25
Plating Plating
Delta P/N Delta P/N
Body Contact Body Contact
Nickel Silver ( C ) UG-491B/U Nickel Gold ( C ) 1034000N000-000
Silver Gold ( C ) M55339/15-00491
Right Angle & Tee Adapter
Figure 1 Figure 2
B
(Right angle plug–jack; B (Tee jack–plug–jack;
connects one plug connects two plugs
and one jack) and one jack)
A
A
Figure 3 Figure 4
(Tee jack–jack–jack; B (Tee jack–jack–plug; B
connects three plugs) connects two plugs
and one jack)
A
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.06 .880 Nickel Silver ( C) UG-306A/U
1 1.06 .880 Nickel Silver ( C) UG-306B/U
1 1.06 .880 Silver Gold ( C) M55339/14-00306
1 1.06 .880 Nickel Gold ( C) 1029000N000-003
2 1.28 1.03 Nickel Silver ( C) UG-274A/U
2 1.28 1.03 Nickel Silver ( C) UG-274B/U
2 1.28 1.03 Nickel Gold ( C) UG-274C/U
2 1.28 1.03 Silver Gold ( C) M55339/17-00274
3 1.28 .890 Nickel Silver ( C) 1038000N000-002
3 1.28 .970 Silver Gold ( C) M55339/17-00002
4 1.50 1.06 Nickel Silver ( C) 1049000N000-000
4 1.50 1.06 Silver Gold ( C) M55339/17-00001

BNC75 Cable Connectors
BNC75 Configurations
Straight Cable Plugs .....................................................31 Panel Plug Receptacles.............................................32

Right Angle Cable Plugs .............................................31 Printed-Circuit Board Receptacles .......................32
Bulkhead Cable Jacks ...................................................31 Bulkhead Jack Receptacles .....................................33
Panel Jack Receptacles (square flange) .................32 In-Series Adapters ......................................................33
Straight & Right Angle Plugs For Flexible Cable

B dia. B
(crimp B
sleeve)
A .50 A
A (crimp sleeve)

(Heli-Grip ® cable hardware) (Crimp type) (Crimp type)

Figure Delta P/N
7 2 1.09 .500 Nickel Gold 7503020N000-002 B/19
7 2 1.05 .410 Nickel Gold ( C) 7503020N001-000 B/26
7 3 1.03 1.71 Nickel Gold 7507019N000-000 B/02
9 2 1.13 .390 Nickel Gold 7503037N001-000 B/27
9 3 1.03 1.71 Nickel Gold 7507037N000-000 B/02
26 2 1.10 .450 Nickel Gold ( C) 7503108N001-000 B/26
31 2 1.13 .500 Nickel Gold 7503279N001-000 B/19

C dia.
Figure 1
(Rear mount)

B .687 rapid, easy assembly—simply trim the cable, slide into
A hex the cone/insulator/contact assembly (left), solder the

7 1 1.16 .810 .500 59 .240 Nickel Gold ( C ) 7516019N595-000 E/03
9 1 1.16 .810 .500 59 .240 Nickel Gold ( C ) 7516037N595-000 E/03

BNC75 Receptacles
Panel Jack & Plug Receptacles - Square Flange
D
C ( I.D. ) C ( I.D. )
D
B B
A A
Figure 1 Figure 2
(Solder pot contact, 11 / 16 " square flange) (Solder pot contact, 1" square flange,
D D
C ( I.D. ) C ( I.D. )
B B
A A
Figure 3 Figure 4
(Solder pot contact, 3 / 4 " square flange) (Solder pot contact, 1" square flange,

Figure Delta P/N
1 1.06 .630 .030 .090 09 Nickel Gold ( C) 7513000N091-000
2 1.06 .630 .030 .080 33 Nickel Gold ( C) 7513000N331-002
3 1.19 .800 .030 .090 18 Nickel Gold ( C) 7523000N180-000
4 1.19 .800 .030 .080 33 Nickel Gold ( C) 7523000N331-001
Receptacles For Printed Circuit Boards

.038 dia. typ. C B
.038 dia. typ. C D dia.
.687
D dia. sq.
.687
sq. A
.500 typ.
B
.500 typ. A
Figure 1 Figure 2
Dimensions Max. Board Mounting Plating

Figure Delta P/N
A B C D Thickness Figure Body Contact
1 .650 .085 .250 .038 .125 PCB02 Nickel Gold ( C ) 7567000N13P-001
2 1.34 .520 .125 .038 .063 PCB02 Nickel Silver ( C ) 7569000N13P-000
(C) in contact plating column indicates captive contact. • See page 208 for mounting dimensions.
See page 6 for alternate body plating information.

BNC75 Receptacles & Adapters
D max. panel D max. panel

C ( I.D. ) C ( I.D. )
.500 B .468 B
dia. A hex A
Figure 1 Figure 2
(D-hole mounting) (Round hole mounting)

Figure Delta P/N
1 1.06 .570 .030 .130 65 Nickel Gold ( C) 7520000N651-001
2 1.06 .470 .030 .130 89 Nickel Gold ( C) 7521000N621-002
Bulkhead Jack - Jack Adapter

(Connect Two Plugs)
B C dia.
A

Delta P/N
1.28 .760 .625 .160 59 Nickel Silver ( C ) 7526000N591-000 *
1.28 .800 .625 .160 59 Nickel Silver ( C ) 7526000N591-001
Straight & Right Angle Adapters
B dia.
B
A A A
(Right angle plug–jack; (Straight plug–plug; (Straight jack–jack;
connects one plug and one jack) connects two jacks) connects two plugs)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.06 .880 Nickel Gold ( C ) 7529000N000-000
2 1.22 .— Nickel Gold ( C ) 7527000N001-000
3 1.28 .440 Nickel Gold ( C ) 7528000N001-000
• See page 208 for mounting dimensions. • *Isolated ground mounting.

C Connectors
General Description
Delta C series connectors are medium-size, 50Ω impedance connectors with two-stud bayonet coupling and good power
handling capability, particularly those connectors noted as high-voltage types. They are best suited for use with cables in
the range of .350" to .450" diameter, but are available for other cables from .100" to over 1" diameter. Our extensive line
of C receptacles includes configurations for virtually any packaging requirement, and we can supply any adapter or
accessory you need to complete your system design. Adapters between C and other series are shown starting on
page 176.
As with our other connector series, Delta’s customer-driven design results in C series connectors with practical and unique
features that make your design and assembly process easier. Some of these include:
• High-voltage types for high-power applications.
• Cable plugs and jacks for armored cables.
Our C series product line is still growing, so please call if you don’t see what you need.
C Configurations
Straight Cable Plugs .......................................................35 Dummy Receptacles ............................................................37

Right Angle Cable Plugs ...............................................35 Panel Plug Receptacles........................................................38
Straight Cable Jacks ........................................................36 Bulkhead Jack Receptacles ...............................................38
Bulkhead Cable Jacks .....................................................36 Dust Caps.................................................................................39
Panel Cable Jacks .............................................................37 In-Series Adapters ................................................................39
Panel Jack Receptacles (square flange) ...................37
C Specifications*
Electrical:
Jack Interface** .332
Reference
Plane Nominal Impedance: 50 ohms.
.530 .338 Frequency Range: DC–11 GHz (standard);
.440 .540 .307
DC–2 GHz (high-voltage).
.450 .313
.374 Voltage Rating: 1,000 volts RMS (standard);
max. 3,000 volts RMS (high-voltage).
179 ° .590 .272 .190 max.
181 ° .600 max. Insulation Resistance: 5,000 megohms.
.119 Materials/Finishes:
.124
.415 .485 .007 max.
.303 Male Contacts: Brass per ASTM-B-16.
.495 .273
Female Contacts: Beryllium Copper per
.309
max. ASTM-B-196.
.495 min. Contact Plating : Silver - ASTM B700
Gold - MIL-DTL-45204.
Reference
Plug Interface** Gaskets: Silicone rubber per ZZ-R-765,
Plane Class II, Grade 50.
.007 min.
.543/.549 Other Metal Parts: Brass per ASTM B16,
.276 min. Plated: Silver - ASTM B700
.194 min. Nickel - AMS-QQ-N-290.
.050 max.
.781 179 ° .612 All other specifications are in accordance
max. 181 ° min.
.090
with the latest issues of MIL-PRF-39012, or
.119 .092 MIL-A-55339, or other applicable MIL
.124 specifications, and interfaces are in
meet gage requirements accordance with MIL-STD-348.
.003 of MIL-PRF-39012/6.
.191 .040 .104 *These specifications are typical and may not
.251 .114 apply to all connectors. Detailed specifica-
Start of .085 max.
taper
.307
.337
tions for individual connectors are available
.309 on request.
min.

C Cable Plugs
B dia.
B dia.
Figure 1 Figure 2
A
A
B dia.
Figure 3
(Includes armor clamp)

Figure Delta P/N
2, 3 1 1.50 .750 Nickel Silver UG-573B/U A/20
2, 3 1 1.72 .750 Nickel Silver UG-628A/U * A/21
2, 3 1 1.50 .750 Nickel Silver ( C ) 1401004N001-000 A/01
15 3 2.13 .750 Nickel Silver UG-943B/U D/04
16 1 1.63 .880 Nickel Silver UG-707A/U A/23
* High-voltage type.
B B
A A
C dia. C dia.
Figure 2
Figure 1 (Includes armor clamp)

Figure Delta P/N
2, 3 1 1.35 1.62 .750 Nickel Gold UG-710B/U A/07
2, 3 1 1.35 1.62 .750 Nickel Silver ( C ) 1404004N001-000 A/01
15 2 1.35 2.31 .750 Nickel Silver UG-945B/U D/01
16 1 1.41 1.78 .880 Nickel Silver 1404007N000-000 A/24

C Cable Jacks
Straight Jack - Military Clamp For Flexible Cable
B dia. B dia.
Figure 1 Figure 2
A A

Figure Delta P/N
2, 3 1 1.41 .750 Nickel Silver UG-572A/U A/20
15 2 2.00 .750 Nickel Silver UG-944A/U D/04
Bulkhead Jack - Military Clamp For Flexible Cable

C dia.
C dia.
.75 hex B
B 1" hex A
A
Figure 1 Figure 2
(Rear mount) (Front mount)
C dia.
Figure 3
(Rear mount;
Includes armor clamp)
B 1" hex
A

2, 3 1 1.41 .750 .750 51 .125 Nickel Silver UG-570A/U A/20
2, 3 1 1.72 .750 .750 51 .125 Nickel Silver UG-632A/U * A/21
2, 3 1 1.41 .750 .750 51 .125 Nickel Silver ( C ) 1416004N511-000 A/01
5, 6 2 1.25 .590 .500 54 .190 Nickel Silver UG-704B/U A/25
15 3 2.00 .750 .750 51 .125 Nickel Silver UG-937A/U D/04

C Cable Jacks & Receptacles
Panel Jack - Military Clamp For Flexible Cable
C dia.
C dia.
B B
A A
Figure 1 Figure 2
C dia.
Figure 3
B
A

1 1 1.41 .690 .750 26 Nickel Silver UG-629A/U A/20
2, 3 1 1.41 .690 .750 26 Nickel Silver UG-571A/U A/20
2, 3 1 1.41 .690 .750 26 Nickel Silver ( C ) 1411004N261-000 A/01
5, 6 2 1.28 .670 .500 26 Nickel Silver 1411015N260-000 A/25
15 3 2.00 .690 .750 26 Nickel Silver UG-938A/U D/04
Panel Jack Receptacles - Square Flange
C ( I.D. ) C ( I.D. )
D D B
B B A
A A Figure 3
Figure 1 Figure 2 (Dummy receptacle)
(Solder pot contact) (Solder pot contact)

Figure Delta P/N
1 1.06 .670 .106 .080 33 Nickel Silver ( C) 1413000N331-000
2 1.31 .670 .106 .080 33 Nickel Gold ( C) 1413000N331-001 *
3 .740 .080 .— .— 33 Nickel — 1463000N330-000
See page 209 for cable groups. • Assembly procedures start on page 210. • See page 208 for mounting dimensions.
(C) in contact plating column indicates captive contact. • See page 6 for alternate body plating information.

C Receptacles
Panel Plug Receptacle -Square Flange
C ( I.D. )
Figure 1
(Solder pot contact)
D
B
A

Figure Delta P/N
1 1.25 .830 .106 .080 33 Nickel Silver ( C ) 1423000N331-000
C ( I.D. ) C ( I.D. )
B 1" hex B 1" hex

A A
Figure 1 Figure 2
(Rear mount, with mounting gasket) (Rear mount, with mounting gasket)
C dia.
.60 B
dia. A
Figure 3
(Front mount, with mounting gasket)

Figure Delta P/N
2 1.32 .750 .106 .125 51 Nickel Silver ( C) UG-634/U *


C Adapters / Accessories
Figure 1
(Connects two plugs)
B C dia.
A
Figure Delta P/N
1 1.50 .855 1.00 .200 51 Nickel Silver ( C ) UG-1138A/U *
1 1.50 .855 1.00 .200 51 Nickel Silver ( C ) 1426000N511-000
Straight, Right Angle & Tee Adapters
Figure 1 Figure 2
(Straight jack–jack; B (Straight plug–plug; B
connects two plugs) connects two jacks)
A A
A
Figure 3 Figure 4
(Right angle jack–plug; (Tee jack–plug–jack; B
connects one plug B connects two plugs
and one jack) and one jack)
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.28 .750 Nickel Silver ( C) UG-643/U
2 1.45 .750 Nickel Silver ( C) UG-642A/U
Dust Caps
A A
C ( I.D. ) C ( I.D. )
Figure 1 Figure 2
B B
Dimensions Plating
A B C
1 .910 2.50 .144 Bead chain Nickel — MX-1142A/U
2 .890 3.50 .144 Bead chain Nickel — MX-1143A/U
*Hermetically sealed. • See page 208 for mounting dimensions.

G874 Connectors
General Description
Delta G874 connectors are hermaphroditic, 50 Ω impedance connectors with an interface compatible with all General
Radio GR874 series connectors. This slide-on interface has been a standard for many years on a wide variety of test
equipment, due to its good electrical characteristics and ease of mating.
All connectors in this series are also available with a locking interface for added mechanical security where needed.
Locking and non-locking interfaces are intermateable.
Specifications
Electrical: Materials / Finishes:
Nominal Impedance: 50 ohms. Insulators: Teflon per ASTM D1710. Gaskets: Silicone rubber per ZZ-R-765,
Frequency Range: DC–8.5 GHz, or Contacts: Beryllium Copper per Class II, Grade 50.
as noted. ASTM B196. Other Metal Parts: Brass per ASTM B16,
Contact Plating: Albaloy (see page 4 Nickel plated -AMS-QQ-N-290,
for details) or Albaloy plated.
Interface Kit
Figure 1 B Figure 2 B
(Non-locking) dia. (Locking) dia.
A ref. A ref.
Dimensions
Figure Plating Delta P/N
A B
1 1.09 .810 See specifications 2801000N000-001
2 1.12 .990 See specifications 2801000N000-000
Cable Connector - Crimp Type For Flexible Cable
B B
dia. dia.
A ref. A ref.
Figure 1 Figure 2
(Non-locking) (Locking)
Cable Dimensions Assembly Procedure/

Group A B Trim Code
2, 3 1 3.27 .810 See specifications 2802002F001-001 ***
2, 3 2 3.27 .990 See specifications 2802002F001-000 ***
5, 6 1 3.27 .810 See specifications 2802012N001-001 ***
5, 6 2 3.27 .990 See specifications 2802012N001-000 ***
7 1 3.27 .810 See specifications 2802021N001-001 ***
See page 209 for cable groups. • ***Contact factory for cable assembly instructions. • Change N in part numbers to Q for Albaloy body.

G874 Connectors & Adapters
Panel Mounted Connector - Crimp Type For Flexible Cable
.100
Figure 1 .812 1.062 .930

(Non-locking) typ. sq. dia.
B
.140 dia. typ. A

Group A B Trim Code
Adapters Within Series
Figure 1 Figure 2
(Right angle, B (Right angle,
B non-locking) locking)
A A
Figure 3 Figure 4
(Tee, non-locking)
(Tee, locking)
B
B
A A
Dimensions
A B
1 2.06 2.06 See specifications 2835000N000-001
See page 209 for cable groups. • ***Contact factory for cable assembly instructions.

G874 Adapters
Adapters Between Series - Non-Locking G874 To:
BNC Jack Length: 1.66 BNC Plug Length: 1.81
Nominal : Nominal :
Impedance: 50 Ω Impedance: 50 Ω
Frequency : Frequency :
Range: DC -4.0 GHz Range: DC -4.0 GHz
Operating : Operating :
Voltage: 500 max. Voltage: 500 max.
Delta P/N 2234000N000-031 Delta P/N 2234000N000-014
C Jack Length: 1.91 C Plug Length: 2.05
Nominal : Nominal :
HN Jack Length: 1.88 HN Plug Length: 2.28
Nominal : Nominal :
N Jack Length: 1.63 N Plug Length: 2.01
Nominal : Nominal :
SC Jack Length: 1.91 SC Plug Length: 2.05
Nominal : Nominal :
SMA Jack Length: 1.68 SMA Plug Length: 1.84
Nominal : Nominal :
TNC Jack Length: 1.66 TNC Plug Length: 1.87
Nominal : Nominal :
UHF Jack Length: 1.80 UHF Plug Length: 2.06

Nominal : Nominal :
Impedance: Nonconstant Impedance: Nonconstant
Range: UHF Range Range: UHF Range
Delta P/N 2234000N000-048 Voltage: 500 max. Delta P/N 2234000N000-029 Voltage: 500 max.

G874 Adapters
Adapters Between Series - Locking G874 To:
BNC Jack Length: 1.66 BNC Plug Length: 1.81
Nominal : Nominal :
C Jack Length: 1.91 C Plug Length: 2.05
Nominal : Nominal :
HN Jack Length: 1.88 HN Plug Length: 2.28
Nominal : Nominal :
N Jack Length: 1.63 N Plug Length: 2.01
Nominal : Nominal :
SC Jack Length: 1.91 SC Plug Length: 2.05
Nominal : Nominal :
SMA Jack Length: 1.68 SMA Plug Length: 1.84
Nominal : Nominal :
TNC Jack Length: 1.66 TNC Plug Length: 1.87
Nominal : Nominal :
UHF Jack Length: 1.80 UHF Plug Length: 2.06
Nominal : Nominal :
Impedance: Nonconstant Impedance: Nonconstant
Range: UHF Range Range: UHF Range
Delta P/N 2234000N000-049 Voltage: 500 max. Delta P/N 2234000N000-050 Voltage: 500 max.

GHV Connectors
General Description & Specifications
Delta GHV connectors are high voltage, 50 Ω impedance connectors with 3 ⁄4 "–20 threaded coupling. They are best suited
for use with RG-8A/U cable, and feature deeply recessed contacts, counterbored insulators, and retractable plug coupling
nuts for high power handling capability and safety.
Electrical: Materials/Finishes:
Nominal Impedance: 50 ohms. Insulators: Teflon per ASTM D1710.
Frequency Range: DC–1 GHz. Male Contacts: Brass per ASTM B16.
Voltage Rating: 25 KV DC (sea level). Female Contacts: Beryllium Copper per ASTM B196.
Insulation Resistance: 5,000 megohms. Contact Plating : Gold -MIL-DTL-45204.
Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16, Silver plated per ASTM B700.
GHV Connectors
.50 B dia. .875 hex

(crimp sleeve)
Figure 1
(Straight cable plug,
crimp type
for flexible cable)
A
.50 C dia.
(crimp sleeve)
Figure 2
(Bulkhead cable jack,
crimp type
for flexible cable)
B 1" dia.
A
.625 dia. B
.296 ( I.D. )
.100 ( I.D. )
Figure 3
(Panel jack receptacle,
square flange)
C
A

2 1 3.19 .625 .— .— .— Silver Gold 1502002A000-000 ***
3 1 3.19 .625 .— .— .— Silver Gold 1502004A000-000 ***
5 1 3.19 .625 .— .— .— Silver Gold 1502017A000-000 ***
2 2 3.63 1.66 .625 51 .750 Silver Gold 1516002A510-000 ***
3 2 3.63 1.66 .625 51 .750 Silver Gold 1516004A510-001 ***
.— 3 1.94 .880 .750 39 .— Silver Gold ( C ) 1513000A391-000 .—
See page 209 for cable groups. • (C) in contact plating column indicates captive contact.
See page 208 for mounting dimensions. • ***Contact factory for cable assembly instructions.

HN Connectors
General Description
3
Delta HN series connectors are medium-size, 50 Ω impedance connectors with ⁄4 -20 threaded coupling and good power
handling capability. They are best suited for use with cables in the range of .350" to .450" diameter, but are available for
other cables from .200" to over 1" diameter. Our extensive line of HN receptacles includes configurations for virtually
any packaging requirement, and we can supply any adapter or accessory you need to complete your system design.
Adapters between HN and other series are shown starting on page 176.
Our HN series product line is still growing, so please call if you don’t see what you need.
HN Configurations
Straight Cable Plugs ...................................................46 Panel Plug Receptacles...........................................48

Right Angle Cable Plugs ...........................................46 Bulkhead Jack Receptacles ...................................48
Straight Cable Jacks ....................................................47 Dummy Receptacles ................................................48
Panel Cable Jacks .........................................................47 Dust Caps .....................................................................48
Panel Jack Receptacles (square flange) ...............48 In-Series Adapters ....................................................49
HN Specifications*
Electrical:
Plug Interface** Nominal Impedance: 50 ohms.
Reference Frequency Range: DC–4 GHz.
Plane Voltage Rating: 1,500 volts RMS.
.138 min.
.120 min. .058 max. Dielectric Withstanding Voltage: 5,000 VRMS.
.132 Materials/Finishes:
max.
.062
Insulators: Teflon per ASTM D1710, or
.925 .066 .289 *See Flare
.760 Rexolite per MIL-P-77.
max. min. below to meet min.
gage test Male Contacts: Brass per ASTM B16.
Female Contacts: Beryllium Copper per
.263
min. .005 min. ASTM B196.
.100 min.
Contact Plating: Silver per ASTM B700, or
.750-20 UNEF-2B, .358 *.432 minimum I.D. when inserted
Gold per MIL-DTL-45204.
.403 min. full thread .388 into .548 dia. ring gage.
.368 min.
Gaskets: Silicone rubber per ZZ-R-765,
Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16, plated:
Jack Interface** Silver - ASTM B700, or
Nickel - AMS-QQ-N-290.
.590 All other specifications are in accordance
min. Reference
Plane
.077/.087 .516 MIL-C-3643, or other applicable MIL
.522 .755 max.
.571/.578 specifications, and interfaces are in
.430 max. accordance with MIL-STD-348.
I.D. to meet
performance max. all connectors. Detailed specifications for individual
requirements
when mated connectors are available on request.
with .062/.066 pin
.268 max. .294 max.
.548
.662/.683 .553
.328
.750-20 UNEF-2A, .358 .005 max.
.359 min. full thread .368
max.

HN Cable Plugs
B dia. B dia.
B dia.
A A A
Figure 1 Figure 2 Figure 3 (Includes armor clamp)

Figure Delta P/N
2, 3 1 2.38 .690 Nickel Silver UG-59B/U ***
2, 3 1 2.81 .690 Nickel Silver ( C) UG-1213/U ***
4 1 2.23 .750 Nickel Silver ( C) 1601079N001-000 ***
5, 6 2 1.50 .500 Nickel Silver 1601015N000-000 A/17
17 1 2.59 1.31 Nickel Silver UG-495D/U A/28
17 3 3.53 1.31 Nickel Silver UG-1148/U ***
20 3 3.20 1.31 Nickel Silver UG-926A/U D/06

A A A
C dia. B
B
(Includes
C dia. armor clamp)
C dia.

Figure Delta P/N
2, 3 1 1.73 1.63 .750 Nickel Silver ( C ) 1605004N001-002 A/29
2, 3 2 1.53 2.25 .690 Nickel Silver ( C ) 1604004N001-000 ***
2, 3 2 1.56 2.48 .750 Nickel Silver 1604005N000-000 A/27
4 2 1.56 2.48 .750 Nickel Silver ( C ) 1604079N001-001 ***
15 3 1.56 3.05 .750 Nickel Silver 1604006N000-000 D/05
See page 209 for cable groups. • Assembly procedures start on page 210. • ***Contact factory for cable assembly instructions.

HN Cable Jacks
B dia.
Figure 1
B dia.
Figure 2

Figure Delta P/N
2, 3 1 2.53 .690 Nickel Silver UG-60B/U ***
2, 3 1 2.94 .690 Nickel Silver ( C ) UG-1214/U ***
17 1 2.53 1.31 Nickel Silver UG-333C/U A/28
C dia.
B
A
Figure 1

2, 3 1 2.53 .590 .690 40 Nickel Silver UG-61B/U ***
2, 3 1 2.03 .590 .750 40 Nickel Silver UG-61E/U A/26
See page 209 for cable groups. • Assembly procedures start on page 210.
***Contact factory for cable assembly instructions. • See page 208 for mounting dimensions.

HN Receptacles / Accessories
Panel & Bulkhead Receptacles
D D
C ( I.D. ) C ( I.D. )
B B
A A
Figure 1 Figure 2
(Panel jack receptacle) (Panel plug receptacle)
D max. panel
B
C ( I.D. )
B 1" hex A
A
Figure 3 Figure 4
(Bulkhead jack receptacle) (Dummy receptacle)

Figure Delta P/N
1 1.50 .590 .106 .080 40 Nickel Silver ( C ) UG-496/U
2 1.88 .940 .106 .080 40 Nickel Silver ( C ) 1623000N401-000
3 1.55 .890 .106 .250 69 Nickel Silver ( C ) 1621000N691-000
4 .875 .125 .— .— 34* Nickel — 1663000N340-000
* Except mounting holes are .120 diameter.
Dust Caps
A A
C ( I.D. ) C ( I.D. )
B B
Figure 1 Figure 2
Dimensions Plating
A B C Body Contact
1 .700 3.50 .144 Bead chain Nickel — 1632000N000-000
• See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact.
• See page 6 for alternate body plating information. • Dust caps available with other chain styles and lengths.

HN Adapters
(Connects two plugs,

pressurized)
B C dia.
A

Delta P/N
1.94 1.06 1.06 .250 69 Nickel Silver ( C ) UG-1019A/U
Straight Adapters
A
Figure 1 A
(Straight jack–jack; Figure 2
connects two plugs) (Straight plug–jack; connects one
plug and one jack)
A
Figure 3
(Straight plug–plug;
connects two jacks)
Dimension Plating
Figure Delta P/N
A B Body Contact
1 2.00 .— Nickel Silver ( C ) 1628000N000-000
2 1.63 .750 Nickel Silver ( C ) 1634000N001-000
3 1.94 .— Nickel Silver ( C ) 1627000N000-000
• See page 6 for alternate body plating information.
249 Delta Electronics

Delta Electronics Mfg.
Mfg. Corp.
Corp. deltarf.com
deltarf.com 978-927-1060
978-927-1060 [email protected]
[email protected]
HN Adapters
Right Angle & Tee Adapters
A A
B B
Figure 1
(Right angle jack–plug; connects
one plug and one jack) Figure 2
(Right angle plug–plug;
connects two jacks)
B
B
A A
Figure 3 Figure 4
(Tee jack–plug–jack; connects (Tee jack–jack–jack;
two plugs and one jack) connects three plugs)
B
Figure 5
(Tee plug–jack–plug; connects
two jacks and one plug)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.50 1.38 Nickel Silver ( C) UG-212C/U
2 1.63 1.63 Nickel Silver ( C) 1637000N000-000
3 1.94 1.88 Nickel Silver ( C) 1630000N000-000
4 1.94 1.28 Nickel Silver ( C) 1638000N000-000
5 2.33 1.50 Nickel Silver ( C) UG-1109/U

LC / LT Connectors
General Description
Delta LC and LT series connectors (which are similar in size, but not intermateable), are large, high-voltage, 50 Ω
impedance connectors with 1 1 ⁄4 –18 threaded mating. They are best suited for use with cables with diameters from
.73" to 1.2", such as RG-17 and 117/U, and RG-18 and 118/U. Because of the variety of designs and assembly methods
within these series, we suggest that you call us to verify the compatibility of specific connector pairs prior to ordering.
As with all other Delta connector series, we welcome your specifications for special configurations.
LC/LT Configurations
Straight Cable Plugs.................................................52

Panel Jack Receptacles (square flange) ............52
In-Series Adapters .....................................................53
LC/LT Specifications
Electrical:
Plug Interface** Nominal Impedance: 50 ohms.
Frequency Range: DC–1 GHz.
LC Series LT Series Voltage Rating: 5,000 volts RMS.
Materials/Finishes:
Insulators: Teflon per ASTM D1710, or
rexolite per MIL-P-77.
Male Contacts: Brass per ASTM B16.
1.281 1.281
±.005 ±.005 Female Contacts: Beryllium Copper per
ASTM B196.
Contact Plating : Silver - ASTM B700, or
.188
1.25-18 NEF-2B 1.25-18 NEF-2B
Safety-wire holes (3) Safety-wire holes (3)
Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16
Plated: Silver - ASTM B700, or
Nickel - AMS-QQ-N-290
Jack Interface**
All other specifications are in accordance
LC Series LT Series with the latest issues of MIL-PRF-39012, or
MIL-C-3650, or other applicable MIL
1.25-18 NEF-2A 1.25-18 NEF-2A specifications.
*These specifications are typical and may not apply to
all connectors. Detailed specifications for individual
.810 .695 .789 .810 .635 .789 connectors are available on request.
±.004 ±.002 ±.001 ±.004 ±.002 ±.001
.375 .375
±.002 .500 ±.002 .500
±.015 ±.015
.625 .625
±.002 ±.002

LC / LT Connectors
Panel Receptacles
B hex B hex
A A
Figure 1 Figure 2
(LC series) (LT series; uses cable center
conductor as contact)

Figure Delta P/N
17, 18 1 3.50 1.50 Nickel Silver UG-154B/U ***
20 2 3.03 1.50 Nickel — UG-532A/U ***
Straight Plug - For Flexible Cable
C ( I.D. )
Figure 1
(LC series, Teflon insulator)
B
A
D
C ( I.D. )
Figure 2
(LC series, pressurized,
Rexolite insulator)
B
A

Figure Delta P/N
1 2.25 1.13 .187 .125 45 Nickel Silver ( C ) UG-352/U
2 3.06 .880 .203 .125 45 Nickel Silver ( C ) UG-352B/U
• See page 209 for cable groups. • ***Contact factory for cable assembly instructions.
• (C) in contact plating column indicates captive contact. • See page 208 for mounting dimensions.
Note: Not all LC series plugs and jacks are intermateable.
Contact factory for compatibility information on specific plug/jack combinations.

LC & LT Adapters
LC Series Adapters
B hex
B hex
A 1.5 hex
A
Figure 1
(Straight jack–jack; Figure 3
connects two plugs) A (Straight LC jack– large LC plug;
connects one LC plug
Figure 2 and one large LC jack)
(Right angle plug–jack;
connects one plug and one jack)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 2.50 1.875 Nickel Silver ( C ) UG-157B/U
LT Series Adapters
B dia. 1.00 B hex
A 1.5 hex
A
Figure 1 Figure 2
(Straight jack–jack; (Straight plug–plug;
connects two plugs) connects two jacks) A
Figure 3
Dimensions Plating
Figure Delta P/N
A B Body Contact
2 3.70 1.50 Nickel Silver ( C) 3527000N001-000
Note: Not all LC series plugs and jacks are intermateable.
Contact factory for compatibility information on specific plug/jack combinations.

MCX Connectors
General Description
Delta MCX connectors are subminiature, 50Ω impedance connectors with snap-on coupling. They are best suited for
use with cables in the range of .070" to .120" diameter, such as RG-178 and RG-316/U.
These connectors provide small size, light weight, and economy with the convenience of snap-on mating and the ability
to rotate connector pairs after mating for precise alignment
All Delta MCX connectors are available with gold-plated bodies, or with nickel-plated bodies for economy.
As with our other connector series, Delta’s customer-driven design results in MCX series connectors with practical and
• P. C. board receptacles (page 57) with a choice of through-hole, edge mounting, or surface mounting.
• P. C. board jack receptacles (page 57) that fit flush with the edge of boards, ideal for daughterboard applications.
Our MCX series product line is still growing, so please call if you don’t see what you need.
MCX Configurations
Straight Cable Plugs .............................................55 Straight P.C. Board Jack Receptacles .....................57
Right Angle Cable Plugs .....................................55 Right Angle P.C. Board Jack Receptacles...............58
Straight Cable Jacks ..............................................56 P.C. Board Plug Receptacles .......................................58
Bulkhead Cable Jacks ...........................................56 PressMount Jack Receptacles....................................58
MCX Specifications*
Reference Plane Electrical:

.163 min.
.010 min. Nominal Impedance: 50 ohms.
Plug .000 min. Frequency Range: DC–6 GHz.
Interface** Voltage Rating: 250–335 volts RMS (dependent on cable).
Dielectric Withstanding
.019/.021 dia.
Voltage: 750–1000 volts RMS (dependent on cable).
.078 dia. min. Insulation Resistance: 1,000 megohms.
.135 dia. max.
.047 max. Materials/Finishes:
.110 min. Insulators: Teflon per ASTM D1710.
.110 min.
.006 min. Male Contacts: Brass per ASTM B16, or
Beryllium Copper per ASTM B196.
Female Contacts: Beryllium Copper per ASTM B196.
Reference Plane
.110 max.
Jack
Contact Plating: Gold per MIL-DTL-45204.
.0315 ±.0020
Interface** Gaskets: Silicone rubber per ZZ-R-765,
20˚
45˚ Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16 or equivalent, plated
.078 dia. max.
Gold - MIL-DTL-45204, or Nickel - AMS-QQ-N-290.
All other specifications are in accordance with the latest issues
of CECC 22220, series MCX.
.136 ±.001 dia.
.000 min.
.145 ±.003 dia. *These specifications are typical and may not apply to all
.110 max. .150 dia. min. connectors. Detailed specifications for individual connectors
.162 max. are available on request.

MCX Cable Plugs
Straight Cable Plugs
.192 dia. .192 dia.
B .168 B .168
A A
Figure 1 Figure 2
(Crimp type for flexible cable) (Crimp type for flexible cable)
.192 dia.
B .168
A
Figure 3
(Direct solder for semi-rigid cable)

Figure Delta P/N
9 1 .690 .270 Gold* Gold 9803037G000-500 B/32
10 1 .690 .270 Gold* Gold 9803100G000-500 B/32
11 2 .790 .370 Gold* Gold 9803038G000-500 B/33
14 3 .580 .160 Gold* Gold 9801025G003-500 H/03
Right Angle Cable Plugs

B .20
B .20
A A
Figure 1 Figure 2
(Crimp type for flexible cable) (Direct solder for semi-rigid cable)

Figure Delta P/N
9 1 .470 .310 Gold* Gold ( C) 9807037G001-500 L/04
10 1 .470 .310 Gold* Gold ( C) 9807100G001-500 L/04
11 1 .470 .310 Gold* Gold ( C) 9807038G001-500 L/04
13 2 .380 .410 Gold* Gold ( C) 9805031G003-500 J/01
14 2 .380 .370 Gold* Gold ( C) 9805025G003-500 J/03
• * Also available with nickel-plated body—change G in Delta part number to N . • See page 209 for cable groups.
• (C) in contact plating column indicates captive contact. • Assembly procedures start on page 210.

MCX Cable Jacks
Straight Cable Jacks
.188 dia. .188 dia.
B B
A A
Figure 1 Figure 2

Figure Delta P/N
9 1 .660 .270 Gold* Gold ( C) 9810037G001-500 B/34
10 1 .660 .270 Gold* Gold ( C) 9810100G001-500 B/34
11 2 .780 .370 Gold* Gold ( C) 9810038G001-500 B/35
Straight Bulkhead Jack - For Flexible Cable
.187 max. panel

.275 hex
.187 max. panel
.275 hex
10-56 UNS-2A 10-56 UNS-2A
C C
B .250 B .250
A hex A hex
Figure 1 Figure 2

9 1 .690 .307 .270 68 Gold* Gold ( C ) 9819037G681-500 B/36
10 1 .690 .307 .270 68 Gold* Gold ( C ) 9819100G681-500 ***
11 2 .790 .307 .370 68 Gold* Gold ( C ) 9819038G681-500 ***
* Also available with nickel-plated body—change G in Delta part number to N . • See page 208 for mounting dimensions.
(C) in contact plating column indicates captive contact. • See page 209 for cable groups.
Assembly procedures start on page 201. • ***Contact factory for assembly procedures.

MCX Receptacles
Straight Printed - Circuit Board Jack Receptacles
.036 .236 sq.

.020 .036 .236 sq.
.012
sq. typ. sq. typ.
.038 .038
.200 dia. .200 dia.
typ. .177 dia. .059 typ. .177 dia.
sq. typ.
B A B A
Figure 1 Figure 2
(Through-hole mount) (Through-hole mount)
.26
B A
.250 sq. B A .18
.031
.040 typ. typ.
.20
.068
.200 dia.
.037 typ. .032 typ. .041 typ.

.038 dia.
.038
dia.
Figure 3 Figure 4
(Edge mount, for .062" thick board) (Flush edge mount)
.232 sq.
.038
dia.
.057 .197 dia.
sq. typ.
B
A
Figure 5
(Surface mount)

Figure Delta P/N
A B Board Figure Body Contact
1 .240 .155 .100 PCB06 Gold* Gold ( C) 9867000G001-500
2 .240 .059 .040 PCB06 Gold* Gold ( C) 9867000G001-501
3 .250 .125 N/A *** Gold* Gold ( C) 9867000G91P-500
4 .246 .120 N/A *** Gold* Gold ( C) 9867000G001-503
5 .236 .016 N/A *** Gold* Gold ( C) 9867000G001-504
• * Also available with nickel-plated body—change G in Delta part number to N . • See page 208 for mounting dimensions.
• (C) in contact plating column indicates captive contact. • ***Contact factory for mounting information.

MCX Receptacles
Right Angle Printed - Circuit Board Jack Receptacle
.236 sq. .37
.032 .118 .25
sq. typ.
.032
dia.
Figure 1
(Through-hole mount) .43
.177 typ. .177

dia.
Plating
Figure Max. Board Thickness Mounting Figure Delta P/N
Body Contact
1 .062 PCB07 Gold* Gold ( C ) 9869000G001-500
Printed - Circuit Board Plug Receptacles

.236 sq. .37
.036 .236 sq. .030
sq. typ. .118 .25
sq. typ.
.038 .036
.200 dia. dia.
.055 typ. .059 .177 typ.
sq. typ. sq. typ.
.42
.070 .44 .020
.51
Figure 1 Figure 2
(Straight—through-hole mounting) (Right angle—through-hole mounting)
Plating
Figure Max. Board Thickness Mounting Figure Delta P/N
Body Contact
1 .050 PCB06 Gold* Gold ( C ) 9868000G001-500
2 .062 PCB07 Gold* Gold ( C ) 9870000G001-500

Component housing
Delta PressMount Receptacles
These connectors eliminate the need for complicated mounting hole patterns and mounting hardware.
They are simply pressed into a single through hole, and the precisely-engineered knurled mounting
Internal section provides retention strength far greater than normal mating and unmating forces. An integral
Circuitry shoulder provides a positive stop when mounting.
.250 dia. A
B
.037
dia.
Figure 1 (Post contact)
.103 dia.
.188 .023 .080
Figure Delta P/N
1 .400 .150 .100 .184 ±.001 dia. Gold* Gold ( C) 9820000G911-001
1 .730 .480 .100 .184 ±.001 dia. Gold* Gold ( C) 9820000G911-008

MHV Connectors
General Description
Delta MHV connectors are compact, 50 Ω impedance, high-voltage connectors with two-stud bayonet coupling.
MHV connectors are similar in size to, but are not intermateable with, BNC connectors. They are best suited for use
with cables in the range of .195" to .220" diameter, but are available for other cables from .090" to over .75" diameter.
For safety, Delta MHV connectors feature deeply recessed contacts, as well as polarized plugs and jacks to ensure that
only the compatible plugs and jacks can be mated in applications incorporating multiple connector pairs.
MHV Configurations
Standard mating Polarized mating

Straight Cable Plugs.........................................................60 Straight Cable Plugs.........................................................60
Right Angle Cable Plugs .................................................60 Bulkhead Cable Jacks.......................................................61
Straight Cable Jacks..........................................................61 Panel Cable Jacks ..............................................................61
Bulkhead Cable Jacks.......................................................61 Panel Jack Receptacles (square flange).....................62
Panel Cable Jacks .............................................................61 Bulkhead Jack Receptacles ............................................62
Panel Jack Receptacles (square flange).....................62
Bulkhead Jack Receptacles ............................................62
MHV Specifications
Electrical:
Plug Interface** Nominal Impedance: Nonconstant.
Frequency Range: DC–50 MHz.
Voltage Rating: 3,500 volts RMS;
.385/.390
5,000 volts DC.
179 ° .463 Insulation Resistance: 5,000 megohms.
.190/.194 .473
181 °
.089 .278
.091 *See .282
.005 below Materials/Finishes:
max. .091 Insulators: Teflon per ASTM D1710.
.086 max. .097
min.
meet gage requirements Female Contacts: Beryllium Copper per
.302 of MIL-PRF-39012/100.
min. ASTM B196.
Reference
Plane Contact Plating: Silver - ASTM B700, or
Gold - MIL-DTL-45204.
Jack Interface** Class II, Grade 50.
Reference Silver - ASTM B700, or
.075/.081 Plane Nickel - AMS-QQ-N-290
.327/.335
.086 min. All other specifications are in accordance
MIL-C-3643, or other applicable MIL
179 ° .432 .346 .327 .319 .284 .186 max. specifications, and interfaces are in
181 ° .436 .356 .333 .321 .290
accordance with MIL-STD-348.
*These specifications are typical and may
.015
.030
.253
.280 .081 not apply to all connectors.
.378 .289 .091 Detailed specifications for individual
.382 .311
connectors are available on request.

MHV Cable Plugs
Straight & Right Angle Plugs For Flexible Cable - Standard Mating
B dia. B (crimp sleeve)
A A
Figure 1 Figure 2
(Clamp type) (Crimp type)
.50 dia.
Figure 3
(Clamp type)

Figure Delta P/N
5, 6 1 1.56 .500 Nickel Silver 1701015N000-000 A/30
8A 1 1.56 .500 Nickel Silver 1701029N000-000 A/30
5 2 1.44 .500 Nickel Silver 1703017N000-000 B/25
7 2 1.44 .500 Nickel Silver 1703020N000-000 B/25
5, 6 3 1.27 1.03 Nickel Silver ( C ) 1705015N000-000 A/32
7 3 1.27 1.03 Nickel Silver ( C ) 1705021N000-000 A/32
Straight Plug For Flexible Cable - Polarized Mating

A A
Figure 1 Figure 2
(Clamp type) (Crimp type)

Figure Delta P/N
5, 6 1 1.56 .500 Nickel Silver 1701015N002-000 A/30
8A 1 1.56 .500 Nickel Silver 1701029N002-000 A/30
5 2 1.44 .500 Nickel Silver 1703017N002-000 B/25
7 2 1.44 .500 Nickel Silver 1703020N002-000 B/25

MHV Cable Jacks
Cable Jacks For Flexible Cable - Standard Mating
B dia. C dia.
A B
A
Figure 1 Figure 2
(Straight jack, clamp type) (Panel jack, clamp type)
C (crimp sleeve)
B
A
Figure 3
(Bulkhead jack, crimp type)

5, 6 1 1.50 .500 .— — .— Nickel Silver 1708015N000-000 A/31
7 1 1.50 .500 .— — .— Nickel Silver UG-1016A/U A/31
5, 6 2 1.44 .780 .440 07 .— Nickel Silver 1711014N070-000 C/07
7 2 1.50 .780 .500 07 .— Nickel Silver UG-961A/U A/31
5 3 1.70 .890 .500 59 .200 Nickel Silver 1719017N590-000 B/24
7 3 1.70 .890 .500 59 .200 Nickel Silver 1719021N590-000 B/24
Cable Jacks For Flexible Cable - Polarized Mating
C dia. C (crimp sleeve)
B B
A A
Figure 1 Figure 2
(Panel jack, clamp type) (Bulkhead jack, crimp type)

5, 6 1 1.50 .780 .500 07 .— Nickel Silver 1711014N072-000 A/31
5 2 1.88 1.08 .500 59 .200 Nickel Silver 1719017N592-000 B/24
7 2 1.88 1.08 .500 59 .200 Nickel Silver 1719021N592-000 B/24

MHV Receptacles
Bulkhead & Panel Receptacles - Standard Mating
D max. panel
C ( I.D. ) C ( I.D. )
D
B B
A A
Figure 1 Figure 2
(Panel jack receptacle) (Bulkhead jack receptacle, front
mount, no mounting gasket)
D max. panel
C ( I.D. )
B
A
Figure 3
(Bulkhead jack receptacle, front
mount, with mounting gasket)

Figure Delta P/N
1 1.34 .630 .043 .090 07 Nickel Gold ( C ) UG-931/U
2 1.42 .470 .043 .110 65 Nickel Gold ( C ) 1720000N651-003
3 1.69 .590 .043 .230 75 Nickel Gold ( C ) 1720000N751-001
Bulkhead & Panel Receptacles - Polarized Mating
D max. panel
C ( I.D. ) C ( I.D. )
D
B B
A A
Figure 1 Figure 2
(Panel jack receptacle) (Bulkhead jack receptacle, front
mount, no mounting gasket)

Figure Delta P/N
1 1.34 .630 .043 .090 07 Nickel Gold ( C ) 1713000N072-000
2 1.54 .510 .043 .180 65 Nickel Gold ( C ) 1720000N652-000

MMCX Connectors
General Description
Delta MMCX connectors are microminiature, 50 Ω impedance connectors with snap-on coupling. They are best suited
for use with cables in the range of .070" to .120" diameter, such as RG-178 and RG-316/U.
These connectors provide small size, light weight, and economy with the convenience of snap-on mating and the ability
to rotate connector pairs after mating for precise alignment. Their non-slotted outer contact provides for low RF leakage.
All Delta MMCX connectors are available with gold-plated bodies, or with nickel-plated bodies for economy.
As with our other connector series, Delta’s customer-driven design results in MMCX series connectors with practical and
• MMCX P. C. board receptacles (page 65) with a choice of through-hole, edge mounting, or surface mounting.
• P. C. board jack receptacles (page 65) that fit flush with the edge of boards, ideal for daughterboard applications.
Our MMCX series product line is still growing, so please call if you don’t see what you need.
MMCX Configurations
Straight Cable Plugs .............................................64 Straight P.C. Board Jack Receptacles .....................65
Right Angle Cable Plugs .....................................64 Right Angle P.C. Board Jack Receptacles...............65
Straight Cable Jacks ..............................................64 Straight P.C. Board Plug Receptacles......................65
MMCX Specifications*
Electrical:
Reference Plane Nominal Impedance: 50 ohms.
.106 min.
Plug .057 min. Frequency Range: DC–6 GHz.
.005 ±.005 Voltage Rating: 170 volts RMS.
Interface**
Dielectric Withstanding Voltage: 500 volts RMS.
.015/.017 dia.
.063 ±.001 dia.
Materials/Finishes:
.094 dia. max. Insulators: Teflon per ASTM D1710.
Male Contacts: Brass per ASTM B16, or
Beryllium Copper per ASTM B196.
Female Contacts: Beryllium Copper - ASTM B196.
Reference Plane Jack
.102 min. Contact Plating: Gold - MIL-DTL-45204.
.0915 ±.0010
Interface**
.009 max. Gaskets: Silicone rubber per ZZ-R-765,Class II, Grade 50.
.063 ±.001
.041 ±.006 Other Metal Parts: Brass - ASTM B16 or equivalent; plated
Gold - MIL-DTL-45204, or Nickel - AMS-QQ-N-290.
All other specifications are in accordance with the latest issues
.095 .113 .119 of CECC 22000.
min. ±.001 ±.001
70˚ *These specifications are typical and may not apply to all
connectors. Detailed specifications for individual connectors
15˚ 30˚ are available on request.

MMCX Cable Connectors
Straight & Right Angle Cable Plugs
.16 dia. .16 dia.
B B
A A
Figure 1 Figure 2
(Straight crimp type for flexible cable) (Straight direct solder for semi-rigid cable)
B .138 B .138
.157 .157
A
A
Figure 3 Figure 4
(Right angle crimp type for flexible cable) (Right angle direct solder for semi-rigid cable)

Figure Delta P/N
9 1 .610 .270 Gold* Gold 9503037G000-500 B/37
9 3 .430 .270 Gold* Gold ( C ) 9507037G001-500 L/04
11 1 .610 .270 Gold* Gold 9503038G000-500 B/37
11 3 .430 .270 Gold* Gold ( C ) 9507038G001-500 L/04
14 2 .490 .160 Gold* Gold 9501025G003-500 H/01
14 4 .300 .270 Gold* Gold ( C ) 9505025G003-500 J/04
Straight Cable Jacks
.16 dia. .16 dia. .16 dia.
B B B
A A A

(Crimp type for flexible cable) (Crimp type for flexible cable) (Direct solder for semi-rigid cable)

Figure Delta P/N
9 1 .630 .270 Gold* Gold 9510037G000-500 B/37
11 2 .700 .370 Gold* Gold 9510038G000-500 B/39
14 3 .510 .160 Gold* Gold 9510025G003-500 H/01
• * Also available with nickel-plated body—change G in Delta part number to N . • See page 209 for cable groups.
• (C) in contact plating column indicates captive contact. • Assembly procedures start on page 210.

MMCX Receptacles
Printed - Circuit Board Jack Receptacles
.035 typ. B A .18

.138 .028 .138 .138 .028 .138
sq. dia. dia. sq. dia. dia. .14
.100 .014 typ.
typ. .14
.028
dia.
.020 B A .031 B A
sq. typ. sq. typ.

(Straight through-hole mount) (Straight surface mount) (Straight flush edge mount)
.138 sq. B A .138 sq. B A

.028 dia. .028 dia.
.020 .020
sq. typ. sq. typ.
.021 dia. .256 .021 dia. .256
.029 sq. typ. .100 typ. .029 sq. typ. .100 typ.
Figure 4 Figure 5
(Right angle through-hole mount) (Right angle surface mount)

Figure Delta P/N
1 .171 .120 .100 PCB08 Gold* Gold ( C) 9567000G001-500
1 .166 .031 .020 PCB08 Gold* Gold ( C) 9567000G001-501
2 .166 .031 N/A ** Gold* Gold ( C) 9567000G001-503
3 .171 .120 N/A ** Gold* Gold ( C) 9567000G001-502
4 .150 .118 .100 PCB08 Gold* Gold ( C) 9569000G001-500
5 .150 .031 N/A ** Gold* Gold ( C) 9569000G001-501
Printed - Circuit Board Plug Receptacles
.035 typ. B A .18
.138 sq. .14

.028 .014 typ.
.020 dia. .14
sq. typ. .028
dia.
B A
.100
typ.
Figure 1 Figure 2
(Straight through-hole mount) (Straight flush edge mount)

Figure Delta P/N
1 .171 .120 .100 PCB08 Gold* Gold ( C ) 9568000G001-500
2 .282 .120 N/A ** Gold* Gold ( C ) 9568000G001-501
2 .173 .120 N/A ** Gold* Gold ( C ) 9568000G001-502
• **Contact factory for mounting dimensions. • (C) in contact plating column indicates captive contact.

MQD (Miniature QDS) Connectors
General Description
Delta MQD (Miniature QDS) connectors feature the MiniQDS VSWR
1.3
same positive-locking, push-on mating as QDS series
connectors, but in a miniature size equivalent to BNC
1.2
and TNC connectors. Along with the convenience of
VSWR
quick-connect and quick-disconnect mating, they
1.1
exhibit good VSWR to 9 GHz.
Our MiniQDS series product line is still growing,
1.0
so please call if you don’t see what you need. .5 1 2 3 4 5 6 7 8 9
Frequency (GHz)
Contact factory for other specifications and interface dimensions.

B
(crimp sleeve )
.687
Figure 1 dia.

Figure Delta P/N
6 1 1.05 .500 Albaloy* Gold 4203015Q000-000 B/23
* Crimp sleeve is nickel plated.
Panel Jack Receptacle - Square Flange
C ( I.D. )
Figure 1 .436 dia.

D
B
A
Also available with other contact/insulator configurations and flange sizes
Figure Delta P/N
1 1.06 .630 .062 .090 07 Albaloy Gold ( C ) 4213000Q071-001
Adapter Between Series

Figure 1
(MiniQDS jack B dia.
to TNC jack)
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.28 .436 Albaloy Gold ( C ) 2234000Q001-136

N Connectors
General Description
Delta type N connectors are medium size, 50 Ω impedance connectors with 5 ⁄ 8 "-24 threaded coupling. They are best
suited for use with cables in the range of .350" to .450" diameter, but are available for other cables with diameters from
.100" to over 1". Many of our N connectors are available as MIL-PRF-39012 QPL versions, and adapters as
MIL-PRF-55339 versions. These types are listed starting on page 190. Our extensive line of type N receptacles includes
configurations for virtually any packaging requirement, and we can supply any adapter or accessory you need to
complete your system design. Adapters between type N and other series are shown starting on page 176.
As with our other connector series, Delta’s customer-driven design results in N series connectors with practical and unique
features that make your design and assembly process easier. Some of these include:
• One-Step cable connectors for quick, accurate assembly to semi-rigid cable.
• Panel receptacles with flange sizes to match the same hole pattern as standard SMA or BNC/TNC connectors, letting
you drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed.
• 70 Ω impedance N connectors (see page 89) for matched-impedance applications.
Our N series product line is still growing, so please call if you don’t see what you need.
N Configurations
Straight Cable Plugs .....................................................68 Dummy Receptacles ...................................................82

Right Angle Cable Plugs .............................................71 Right Angle Panel Jack Receptacles .....................82
Tee Cable Plugs ..............................................................72 Panel Plug Receptacles..............................................83
Straight Cable Jacks ......................................................72 Bulkhead Jack Receptacles ......................................84
Bulkhead Cable Jacks ...................................................74 Stripline Receptacles ..................................................84
Tee Bulkhead Cable Jacks...........................................75 PressMount Receptacles............................................85
Panel Cable Jacks ..........................................................76 Resistive Terminations ................................................86
Panel Jack Receptacles (square flange) ................79 Dust Caps ........................................................................86
Panel Jack Receptacles (round flange) ..................79 In-Series Adapters ........................................................87
N Specifications*
Electrical: Contact Plating: Silver per ASTM B700, or
Nominal Impedance: 50 ohms. Gold per MIL-DTL-45204.
Frequency Range: DC–11 GHz. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
Voltage Rating: 1,000 volts RMS. Other Metal Parts: Brass per ASTM B16, plated:
Dielectric Withstanding Voltage: 2,500 volts RMS. Silver per ASTM B700, or
Insulation Resistance: 5,000 megohms. Nickel per AMS-QQ-N-290.
Materials/Finishes: All other specifications are in accordance with the
Insulators: Teflon per ASTM D1710. latest issues of MIL-PRF-39012, or MIL-A-55339, or other
Male Contacts: Brass per ASTM B16. applicable MIL specifications, and interfaces
Female Contacts: Beryllium Copper per ASTM B196. are in accordance with MIL-STD-348.
*These specifications
Plug Interface** Reference Plane Jack Interface** Reference Plane
are typical and may
.398/.412 not apply to all
.016/.060 .356/.362
.210/.230 .187/.207 connectors. Detailed
.625-24 UNEF-2A
specifications for
individual connectors
.630 dia. are available on
min. .336 .316 .627 dia.
.827 dia. .330 dia. request.
max. max. .344 .320 max.
.119
.124 dia.
.047/.077 .047
.158 COMPENSATING .077 .119/.124
.168 RING OPTIONAL
.625-24 UNEF-2B .172/.202
.177 min. full thread SLOTS REQUIRED; .422 min.
DESIGN OPTIONAL.

N Cable Plugs
B dia. B dia.
B dia.
A A A

Figure Delta P/N
1 1 1.50 .750 Nickel Silver UG-18E/U A/01
1 1 1.50 .750 Nickel Silver ( C) 1101001N001-000 A/01
2, 3 1 1.80 .680 Nickel Silver UG-21B/U C/01
2, 3 1 1.50 .750 Nickel Gold UG-21D/U A/01
2, 3 1 1.50 .750 Nickel Gold UG-21E/U A/01
2, 3 1 1.50 .750 Nickel Gold UG-21G/U A/01
2, 3 1 1.50 .750 Nickel Silver ( C) UG-1185/U A/01
2, 3 1 1.50 .750 Nickel Gold ( C) UG-1185A/U A/01
2, 3 1 1.50 .750 Silver Gold ( C) M39012/01-0005 * A/01
5, 6 2 1.41 .500 Nickel Gold UG-536C/U A/02
5, 6 2 1.41 .500 Nickel Gold ( C) 1101015N001-000 A/02
9 2 1.38 .500 Nickel Silver 1101036N000-000 A/02
15 3 2.42 .750 Silver Gold ( C) M39012/01-0125 * D/03
16 1 1.80 .880 Nickel Silver UG-204A/U C/02
16 1 1.80 .880 Silver Gold ( C) M39012/01-0015 * A/01
20 3 3.09 1.31 Nickel Silver UG-557A/U D/02
25 2 1.38 .500 Nickel Silver 1101132N000-000 A/03
* Lockwire holes in coupling nut.
Optional Type N Coupling Nut Examples
.033 dia.
lockwire holes (3)
.812 hex .812 hex

13/16 " hex coupling nut 13/16 " hex coupling nut with lockwire holes
These designs allow the connectors to be tightened with a wrench for precise torquing of mated parts, and can be supplied
on any Delta type N plug. Please call for details of these options or any other special requirements you may have.

N Cable Plugs
Figure 1 Figure 2
B
B (crimp sleeve)
(crimp sleeve)
A A

Figure Delta P/N
2 1 1.51 .630 Nickel Silver 1103002N000-000 B/01
2 1 1.55 .630 Nickel Gold ( C) 1103002N001-009 B/03
2 1 1.55 .600 Silver Gold ( C) M39012/01B0007 * B/03
2 1 1.55 .600 Silver Gold ( C) M39012/01-0502 * B/03
2B 1 1.55 .630 Nickel Silver 1103070N000-000 B/01
3A, 4 1 1.55 .630 Nickel Gold ( C) 1103004N001-001 B/03
3A, 4 1 1.51 .630 Nickel Silver 1103005N000-000 B/01
3A, 3C, 4 1 1.55 .600 Silver Gold ( C) M39012/01B0008 * B/03
3A, 3C, 4 1 1.55 .600 Silver Gold ( C) M39012/01-0501 * B/03
4 1 1.50 .630 Nickel Silver 1103079N000-000 B/01
5 2 1.43 .500 Nickel Silver 1103017N000-000 B/04
5 1 1.48 .500 Nickel Gold ( C) 1103017N001-000 B/05
6 2 1.43 .500 Nickel Silver 1103013N000-000 B/04
6 1 1.45 .500 Nickel Gold ( C) 1103018N001-000 B/03
6 1 1.45 .500 Silver Gold ( C) M39012/01-0503 * B/03
7 2 1.43 .500 Nickel Silver 1103020N000-000 B/06
7 1 1.38 .500 Nickel Gold ( C) 1103020N001-000 B/03

Heli-Grip ® Cable Attachment
B dia.
B dia.

A the cone/insulator/contact assembly (left), solder the
A center conductor to the contact, and screw body
Figure 1 Figure 2 assembly (right) onto cable assembly.

Figure Delta P/N
2 1 1.50 .750 Nickel Gold ( C) 1101004N005-000 E/01
3 1 1.50 .750 Nickel Gold ( C) 1101004N005-006 E/01
5, 6 § 2 1.41 .500 Nickel Gold ( C) 1101015N005-000 E/02
RG-223 2 1.41 .500 Nickel Gold ( C) 1101015N005-001 E/02
7 2 1.38 .500 Nickel Gold ( C) 1101021N005-000 E/02
24 1 1.50 .750 Nickel Gold ( C) 1101052N005-000 E/01
26 1 1.50 .750 Nickel Gold ( C) 1101108N005-000 E/01

N Cable Plugs
Straight Plug - For Semi-Rigid Cable
B dia.
B ( I.D. )
A A
Figure 1 Figure 2
(Solder-clamp; gold-plated (Direct solder; gold-plated body, nickel ( 1)
ferrule, nickel-plated body) or passivated ( 2) coupling nut)
Delta One-Step Cable Attachment Straight Plugs - For Semi-Rigid Cable

Solder
Cable Delta “One-Step” connectors feature captivated
contacts and insulators to allow rapid, easy assembly
to semi-rigid cable—simply trim the cable jacket and
dielectric flush, chamfer the center conductor, insert
into the connector, and solder the jacket to the
connector body.
B ( I.D. ) B ( I.D. )
A .812 hex
A
Figure 3 Figure 4
(One-Step cable attachment, standard coupling nut) (One-Step cable attachment, hex coupling nut)
Cable Dimension
s Plating Assembly Procedure/
Figure Delta P/N
12 1 1.50 .500 Nickel Silver 1101050N000-000 F/03
12 2 .960 .254 Mixed( 1) Silver 1101050N003-000 ***
12 4 1.44 .254 Silver Gold ( C ) 1101050A003-007 I/01
13 1 1.41 .500 Nickel Silver 1101031N003-000 F/01
13 2 .960 .143 Mixed( 1) Gold 1101031N003-001 ***
13 2 .960 .143 Mixed( 2) Gold 1101031K00M-000 ***
13 3 .960 .143 Silver Gold ( C ) 1101031A003-008 I/01
13 4 .960 .143 Silver Gold ( C ) 1101031A003-012 I/01
14 1 1.41 .500 Nickel Silver 1101025N003-000 F/02
( 1) Brass body and coupling nut.
( 2) Stainless steel body and coupling nut.
• See page 209 for cable groups. • Assembly procedures start on page 210. • ***Contact factory for cable assembly instructions.

N Cable Plugs
A
A
A
B B
B
C dia. C dia. C dia.

(Mitered body) (Cube body with access cap) (Cube body)

Figure Delta P/N
2, 3 1 1.47 1.88 .750 Nickel Silver ( C) UG-594B/U A/01
2, 3 3 1.36 1.66 .750 Silver Gold ( C) M39012/05-0101 A/07
2, 3 3 1.39 1.66 .750 Nickel Gold 1105004N000-000 A/04
5 3 1.39 2.00 .750 Nickel Gold ( C) 1104032N001-000 A/08
Right Angle Plug - Crimp For Flexible Cable

A A
B B
B
C dia. C dia.

(Cube body) (Cube body with access cap) (Mitered body)

Figure Delta P/N
2 1 1.39 1.77 .750 Nickel Silver 1107002N000-000 B/07
2 2 1.39 1.25 .— Nickel Silver ( C) 1107002N000-001 B/09
3 1 1.39 1.77 .750 Nickel Silver 1107005N000-000 B/07
2 3 1.41 2.30 .687 Nickel Gold ( C) 1107002N001-002 B/30
3 3 1.41 2.30 .687 Nickel Gold ( C) 1107004N001-002 B/30
6 3 1.41 2.25 .687 Nickel Gold ( C) 1107034N001-001 B/08

N Cable Plugs / Jacks
Tee Plug - For Flexible & Semi-Rigid Cable
A A
Figure 1 Figure 2
(Crimp type for (Direct solder for
flexible cable) semi-rigid cable)
B B

Figure Delta P/N
2 1 1.39 2.00 Silver Silver ( C) 1185002A000-000 B/16
13 2 1.39 .900 Silver Silver ( C) 1185031A000-000 ***

B dia. B dia.
B dia.
A A
A

Figure Delta P/N
1 1 1.56 .750 Nickel Silver UG-20E/U A/01
1 1 1.67 .750 Silver Gold ( C) M39012/02-0101 A/01
2, 3 1 1.56 .750 Nickel Silver UG-23D/U A/01
2, 3 1 1.56 .750 Nickel Gold UG-23F/U A/01
2, 3 1 1.56 .750 Nickel Silver ( C) UG-1186/U A/01
2, 3 1 1.56 .750 Nickel Silver ( C) UG-1186A/U A/01
2, 3 1 1.67 .750 Silver Gold ( C) M39012/02-0003 A/01
5, 6 2 1.41 .500 Nickel Silver 1108015N000-000 A/05
5, 6 2 1.47 .500 Nickel Silver ( C) 1108015N001-000 A/02
7 2 1.27 .500 Nickel Silver 1108000N000-003 * —
19 1 1.56 .750 Nickel Gold ( C) 1108027N001-000 A/12
22 1 1.87 .690 Nickel Gold 1108123N000-000 C/03
*UG-602A/U less clamping hardware.

N Cable Jacks
Straight Jack - Crimp Type For Flexible Cable
Figure 1
B
(crimp sleeve)
A
Figure Delta P/N
2 1 1.64 .600 Silver Gold ( C) M39012/02B0008 B/10
2 1 1.64 .600 Silver Gold ( C) M39012/02-0502 B/03
2 1 1.47 .500 Nickel Gold 1110002N000-000 B/10
2 1 1.60 .630 Nickel Gold ( C) 1110002N001-000 B/11
3 1 1.64 .600 Silver Gold ( C) M39012/02B0009 B/10
3 1 1.64 .600 Silver Gold ( C) M39012/02-0501 B/03
3 1 1.47 .500 Nickel Gold 1110005N000-000 B/10
3 1 1.60 .630 Nickel Gold ( C) 1110005N001-000 B/10
6 1 1.56 .500 Nickel Gold 1110013N000-001 B/12
6 1 1.54 .500 Silver Gold ( C) M39012/02-0503 B/03
Straight Jack - Heli-Grip® For Flexible Cable

B dia.
B dia.
Figure 1 Figure 2
A A
Figure Delta P/N
2, 3 1 1.63 .750 Nickel Gold ( C ) 1108004N005-002 E/01
5, 6 § 2 1.41 .500 Nickel Gold ( C ) 1108018N005-002 E/02
RG-223 2 1.41 .500 Nickel Gold ( C ) 1108015N005-000 E/02
7 2 1.41 .500 Nickel Gold ( C ) 1108019N005-002 E/02
8 2 1.41 .500 Nickel Gold ( C ) 1108029N005-001 E/02
9 2 1.41 .500 Nickel Gold ( C ) 1108037N005-002 E/02
§Except RG-223/U.
Straight Jack - For Semi-Rigid Cable

B ( I.D. ) B ( I.D. )
Figure 1 Figure 2
A A

Figure Delta P/N
12 1 1.07 .254 Silver Gold 1108050A003-003 ***
13 2 1.00 .143 Silver Gold 1108031A003-000 ***

N Cable Jacks
C dia.
C dia.
B D dia. B D dia.
A A
Figure 1 Figure 2

Group A B C D Figure Panel Body Contact Trim Code
1 1 1.75 .920 .750 .900 72 .250 Silver Gold ( C) M39012/03-0101 A/01
2, 3 1 1.75 .920 .750 .875 72 .250 Nickel Silver UG-160D/U A/01
2, 3 1 1.84 .920 .750 .812 72 .250 Nickel Silver ( C) 1116003N721-000 ***
2, 3 1 1.75 .920 .750 .875 72 .250 Nickel Gold 1116004N720-001 A/01
5, 6 2 1.67 .920 .500 .812 72 .250 Nickel Silver UG-556B/U A/06
5, 6 2 1.67 .920 .500 .875 72 .250 Nickel Gold ( C) 1116015N721-000 A/02
7 2 1.47 .920 .500 .875 72 .250 Nickel Silver 1116021N720-000 A/14
7 2 1.47 .920 .500 .875 72 .250 Nickel Gold ( C) 1116021N721-000 A/14
9 2 1.48 .920 .500 .875 72 .250 Nickel Silver ( C) 1116036N721-000 A/10
16 1 1.90 .920 .880 .875 72 .250 Silver Gold ( C) M39012/03-0102 A/01
Bulkhead Jack - Crimp Type For Flexible Cable
Figure 1
(Rear mount)
C
(crimp sleeve)
B D dia.
A

Group A B C D Figure Panel Body Contact Trim Code
2 1 1.84 .920 .600 .875 72 .250 Silver Gold ( C) M39012/03B0004 B/03
2 1 1.84 .920 .600 .875 72 .250 Silver Gold ( C) M39012/03-0502 B/03
3 1 1.84 .920 .600 .875 72 .250 Silver Gold ( C) M39012/03B0005 B/03
3 1 1.84 .920 .600 .875 72 .250 Silver Gold ( C) M39012/03-0501 B/03
6 1 1.74 .950 .500 .875 72 .250 Nickel Gold ( C) 1119013N721-000 B/13
6 1 1.74 .920 .500 .875 72 .250 Silver Gold ( C) M39012/03-0503 B/03
7 1 1.59 .920 .500 .812 72 .250 Nickel Silver 1119020N720-000 B/14
9 1 1.45 .880 .440 .812 72 .250 Nickel Silver ( C) 1119036N721-000 B/15
10 1 1.45 .880 .440 .812 72 .250 Nickel Gold ( C) 1119100N721-000 B/15
• See page 209 for cable groups. • Assembly procedures start on page 210. • ***Contact factory for cable assembly instructions

N Cable Jacks
C dia.
C dia.
B .812 dia. B .812 dia.

A A
Figure 1 Figure 2


2, 3 1 1.84 .920 .750 72 .250 Nickel Gold ( C) 1116004N725-000 E/01
5, 6 § 2 1.69 .920 .500 72 .250 Nickel Gold ( C) 1116015N725-000 E/03
RG-223 2 1.69 .920 .500 72 .250 Nickel Gold ( C) 1116015N725-001 E/03
7 2 1.69 .920 .500 72 .250 Nickel Gold ( C) 1116021N725-000 E/03
10 2 1.69 .920 .500 72 .250 Nickel Gold ( C) 1116100N725-000 E/03
§ Except RG-223/U.
Tee Bulkhead Jack - For Flexible & Semi-Rigid Cable

A
A
C dia. C dia.
B B
.675 .675
Figure 1 Figure 2
(Crimp type for (Direct solder for
flexible cable) semi-rigid cable)

2 1 1.40 2.00 .750 55 .100 Silver Silver ( C ) 1185002A551-000 B/16
13 2 1.38 .900 .750 55 .100 Silver Silver ( C ) 1185031A551-000 ***
• *** Contact factory for cable assembly instructions. • See page 208 for mounting dimensions.

N Cable Jacks
Bulkhead Jack - For Semi-Rigid Cable
C
O-ring
Ferrule
Backnut Collet
B .812 dia.
A
Figure 1
(Collet clamp [solderless] cable attachment, captive contact in body)
C dia.
C ( I.D. )
B .812 dia. .812 dia.

B
A A
Figure 2 Figure 3
(Solder-clamp; gold-plated ferrule, (Direct solder)
nickel-plated body)
Delta One-Step Cable Attachment - For Semi-Rigid Cable
One-Step Cable Attachment

C ( I.D. )
Solder
Cable
B .875 dia.
Delta “One-Step” connectors feature captivated A
contacts and insulators to allow rapid, easy
assembly to semi-rigid cable—simply trim the Figure 4
cable jacket and dielectric flush, chamfer the (One-Step cable attachment)
center conductor, insert into the connector, and
solder the jacket to the connector body.

12 1 1.55 .889 .500 72 .250 Nickel Gold ( C) 1116163N721-000 ***
13 2 1.67 .922 .500 72 .250 Nickel Gold 1116031N720-000 F/04
13 3 1.33 .884 .145 72 .250 Nickel Gold 1116031N723-001 ***
13 4 1.38 .922 .143 72 .250 Silver Gold ( C) 1116031A723-003 I/01
14 2 1.67 .922 .500 72 .250 Nickel Gold 1116025N723-000 F/04
14 3 1.33 .884 .090 72 .250 Nickel Gold 1116025N723-001 ***
14 4 1.38 .922 .088 72 .250 Silver Gold ( C) 1116025A723-002 I/01

N Cable Jacks
Panel Jack - For Flexible Cable
C dia.
C dia.
B B
A A
Figure 1 Figure 2
Heli-Grip ® Cable Attachment (where noted)

Military Clamp For Flexible Cable

1 1 1.67 .660 .750 33 Silver Gold ( C) M39012/02-0104 A/01
2, 3 1 1.58 .660 .750 33 Nickel Silver UG-22D/U A/01
2, 3 1 1.58 .660 .750 33 Nickel Gold UG-22F/U A/01
2, 3 1 1.58 .660 .750 33 Nickel Silver ( C) UG-1187/U A/01
2, 3 1 1.58 .660 .750 33 Nickel Silver ( C) UG-1187A/U A/01
2, 3 1 1.67 .660 .750 33 Silver Gold ( C) M39012/02-0006 A/01
5, 6 2 1.41 .660 .500 33 Nickel Silver UG-1095B/U A/13
5, 6 2 1.41 .660 .500 33 Nickel Gold UG-1095C/U A/13
5, 6 2 1.41 .660 .500 27 Nickel Silver 1111015N270-000 A/13
5, 6 2 1.48 .660 .500 27 Nickel Gold ( C) 1111015N271-000 A/02
5, 6 2 1.41 .660 .500 33 Nickel Silver ( C) 1111015N331-000 A/02
7 2 1.41 .660 .500 33 Nickel Silver UG-593A/U A/14
9 2 1.44 .660 .500 33 Nickel Silver 1111036N330-000 A/16
19 1 1.56 .660 .750 33 Nickel Gold ( C) 1111027N331-000 A/12
22 1 1.87 .660 .690 30 Nickel Gold 1111123N300-000 C/03
Heli-Grip For Flexible Cable

2, 3 1 1.58 .660 .750 33 Nickel Gold ( C) 1111004N335-000 E/01
§ 5, 6 § 2 1.41 .660 .500 33 Nickel Gold ( C) 1111015N335-000 E/03
RG-223 2 1.41 .920 .500 33 Nickel Gold ( C) 1111015N335-001 E/03
7 2 1.41 .660 .500 33 Nickel Gold ( C) 1111021N335-000 E/03
9 2 1.41 .660 .500 33 Nickel Gold ( C) 1111037N335-001 E/03
10 2 1.41 .660 .500 33 Nickel Gold ( C) 1111100N335-001 E/03
§Except RG-223/U.

N Cable Jacks
Panel Jack - Crimp Type For Flexible Cable
Captive
insulator
Crimp sleeve C
Captive
C B Backnut/crimp tail contact B
A A
Figure 1 (Standard crimp type) Figure 2 (Contact and insulator captive in backnut)

2 1 1.64 .660 .600 33 Silver Gold ( C) M39012/02-0512 B/03
3 1 1.64 .660 .600 33 Silver Gold ( C) M39012/02-0511 B/03
5 2 1.19 .595 .500 33 Nickel Silver ( C) 1155017N331-000 ***
6 2 1.19 .595 .500 33 Nickel Silver ( C) 1155013N331-000 ***
6 1 1.54 .660 .500 33 Silver Gold ( C) M39012/02-0513 B/03
9 2 1.16 .595 .380 33 Nickel Silver ( C) 1155037N331-000 ***
Panel Jack - For Semi-Rigid Cable
C dia.
Figure 1
(Solder-clamp; gold-plated ferrule,
nickel-plated body)
B
A
C ( I.D. ) C ( I.D. )
B B
A
A
Figure 2 (One-Step cable attachment—see page 76 for details) Figure 3 (One-Step cable attachment—see page 76 for details)

13 1 1.41 .660 .500 33 Nickel Gold 1111031N333-001 F/05
13 2 1.11 .660 .143 09 Silver Gold ( C) 1111031A091-001 I/01
13 3 1.07 .640 .143 33 Silver Gold ( C) 1111031A333-004 I/01
14 1 1.41 .660 .500 33 Nickel Gold 1111025N333-000 F/05
14 2 1.11 .660 .088 09 Silver Gold ( C) 1111025A091-001 I/01
14 3 1.07 .640 .088 33 Silver Gold ( C) 1111025A333-002 I/01

N Receptacles
Panel Jack Receptacle -Solder Pot Contact
D C
C ( I.D. ) .032 .162 dia. B
( I.D. )
D
B A
.050 dia.
A
Figure 2
( 11/ 16 " square flange, interchangeable with
Figure 1 BNC and TNC standard flange size)
D
C ( I.D. )
Figure 3
B
A
Figure Delta P/N
1 1.13 .660 .100 .080 33 Silver Gold ( C) M39012/04-0002
1 1.13 .660 .100 .050 18 Nickel Silver ( C) 1113000N181-000
1 1.13 .660 .100 .080 32A Nickel Silver ( C) 1113000N321-002
1 1.13 .660 .100 .080 32 Nickel Gold ( C) 1113000N321-003
1 1.13 .660 .100 .080 33 Silver Gold ( C) 1113000A331-011
1 1.13 .660 .100 .080 33 Nickel Gold ( C) 1113000N331-011
1 1.13 .660 .100 .080 95 Nickel Silver ( C) 1113000N951-000
2 .735 .075 .125 .250 09 Nickel Silver ( C) 1113000N091-002
3 1.13 .660 .100 .080 33 Nickel Gold ( C) 1113000N331-009
Panel Jack Receptacle - Solder Pot Contact

Round Flange (For Solder Or Setscrew Mounting)
D
D
C ( I.D. ) C ( I.D. )
B E dia. B
E dia. A
A
Figure 1 Figure 2
Dimensions Plating
Figure Delta P/N
A B C D E Body Contact
1 1.25 .660 .100 .175 1.50 Nickel Silver ( C ) 1113000N911-002
1 1.25 .660 .100 .125 1.25 Nickel Gold ( C ) 1113000N911-005
2 1.13 .660 .100 .110 .575 Nickel Silver ( C ) 1120000N831-000
• See page 6 for alternate body plating information. • All items are available with other flange sizes and contact configurations.

N Receptacles
Panel Jack Receptacle -Slotted Contact
D B B
.120
slot dia.
width
D
C dia. slot
.075 width
A C
A
Figure 1 Figure 2
( 11/ 16 "
square flange, interchangeable
with BNC and TNC standard flange size)

Figure Delta P/N
1 .735 .050 .086 .012/.017 09 Nickel Gold ( C) * 1143000N091-002
1 .735 .050 .086 .036 09 Nickel Gold ( C) * 1143000N091-003
1 .735 .050 .086 .007/.012 09 Nickel Gold ( C) * 1143000N091-004
1 .735 .050 .050 .012/.017 09 Nickel Gold ( C) * 1143000N091-009
2 .736 .080 .050 .012/.017 33 Nickel Gold ( C) * 1143000N330-010
2 .736 .080 .050 .026/.030 33 Nickel Gold ( C) * 1143000N331-017
2 .736 .080 .050 .020/.025 33 Nickel Gold ( C) 1143000N331-023
2 .735 .080 .050 .026/.030 33 Nickel Gold ( C) 1143000N331-054
2 .736 .080 .050 .012/.017 33 Nickel Gold ( C) 1143000N331-055
*Epoxy-captivated contact.
Panel Jack Receptacle -Tab Contact

D
C
Tab C
.005/.010 Tab
thick x D thick x
.120 wide .120 wide
Figure 1 Figure 2
.384 dia.
B B
A A
C
Tab
Figure 3 D thick x
( 11/ 16 " square flange, interchangeable .050 wide
with BNC and TNC standard flange size)
B
A

Figure Delta P/N
1 .736 .080 .195 .350 33 Nickel Gold ( C ) * 1143000N330-012
2 .736 .080 .100 .005/.008 33 Silver Gold ( C )* 1158000A331-012
3 .735 .075 .050 .004/.006 09 Silver Gold ( C )* 1158000A091-023

N Receptacles
Panel Jack Receptacle - Post Contact
D C C
.162 dia. B
.120 dia.
D
B .050 dia. A
A
Figure 2
Figure 1 ( 11/ 16 " square flange, interchangeable with
BNC and TNC standard flange size)
D
.162 dia. B
.120 dia. C
C
.384 dia. D
B .050 dia. A
A
Figure 3 Figure 4
( 1/ 2 " square flange, interchangeable
with SMA standard flange size)
C
.162 dia. B
O-ring
D
.050 dia. A
Figure 5
(O-ring seal on flange, 11/ 16 " square flange,
interchangeable with BNC and TNC standard flange size)

Figure Delta P/N
1 .736 .080 .660 .560 33 Nickel Gold ( C) 1113000N331-028
2 .735 .075 .125 .250 09 Nickel Silver ( C) 1143000N091-018
2 .735 .075 .125 .250 09 Nickel Gold ( C) 1143000N091-030
2 .735 .075 .590 .705 09 Nickel Gold ( C) * 1143000N091-069
3 .736 .080 .590 .705 33 Nickel Gold 1143000N330-018
3 .736 .080 .590 .705 33 Nickel Gold ( C) * 1158000N331-015
4 .814 .080 .590 .705 05 Nickel Gold ( C) 1143000N051-002
5 .735 .075 .200 .450 09 Nickel Gold ( C) 1143000N091-059
5 .735 .075 .750 .875 09 Nickel Gold ( C) 1143000N091-073
5 .735 .075 .375 .425 09 Nickel Gold ( C )* 1143000N091-075

N Receptacles
Right Angle Panel Jack Receptacle
D ( I.D. ) D dia.
C A C A
B B
Figure 1 Figure 2
.120
D dia. dia.
D A
C A slot
width
C
B B
Figure 3 Figure 4

Figure Delta P/N
1 1.41 1.16 .300 .101 33 Nickel Silver ( C) UG-997A/U
1 1.41 1.16 .300 .101 33 Nickel Gold ( C) 1115000N330-005
2 1.41 1.16 .750 .120 33 Nickel Silver ( C) 1115000N330-009
3 1.41 .830 .560 .120 33 Nickel Gold ( C) 1115000N330-012
4 1.41 1.17 .050 .020/.025 33 Nickel Silver ( C) 1115000N330-011
Dummy Receptacle
B
Dimensions Plating
A B Body Contact
.740 .080 33 Nickel — 1163000N330-000

N Receptacles
B B
.120
C ( I.D. ) dia.
Figure 1 Figure 2
(Solder pot (Slotted
contact) contact) D
slot
width
D
A C
A
C
D C Tab
D thick x
slot .065 wide
Figure 3 width Figure 4
(Slotted (Tab
contact) contact)
.050 B
dia.
A B
A
C C
.162 dia. B
Figure 5 Figure 6
(Post (Post
contact) contact)
D dia.
D
B .050 dia.
A
A
D
.120 dia. C
Figure 7
(Post contact)
.384 dia.
B
A
Figure Delta P/N
1 1.10 .080 .101 .720 33 Nickel Silver ( C) 1123000N330-000
1 1.10 .080 .101 .720 33 Nickel Gold ( C) 1123000N330-004
2 .780 .080 .050 .012/.017 33 Nickel Gold ( C) 1159000N330-001
2 .810 .080 .050 .012/.017 33 Nickel Gold ( C) 1159000N330-013
2 .810 .080 .050 .026/.030 33 Nickel Gold ( C) * 1159000N331-026
3 1.17 .075 .050 .020 09 Nickel Gold ( C) * 1159000N091-004
4 .810 .080 .100 .005/.008 33 Nickel Gold ( C) * 1159000N331-009
5 .810 .080 .360 .120 33 Nickel Gold ( C) 1123000N330-002
6 1.17 .075 .125 .250 09 Nickel Gold ( C) 1159000N091-010
7 .810 .080 .590 1.10 33 Nickel Gold ( C) * 1159000N331-006
7 .810 .080 .330 .488 33 Nickel Gold 1159000N330-011
7 .810 .080 .330 .488 33 Nickel Gold ( C) * 1159000N331-000

N Receptacles
C ( I.D. ) C ( I.D. )
.812 dia. B B .812 dia.

A A
Figure 1 Figure 2
(Front mount, hermetically sealed, with mounting gasket) (Rear mount, hermetically sealed, with mounting gasket)
C ( I.D. ) C ( I.D. )
B B
A A
Figure 3 Figure 4
(Front mount, no gasket) (Front mount, no gasket, screw-in type
for 9/ 16 –24 tapped hole)

Figure Delta P/N
1 1.62 .707 .099 .100 72 Silver Gold ( C) M39012/04-0001
2 1.53 .919 .099 .250 72 Nickel Silver ( C) 1121000N728-005
3 1.25 .606 .099 .100 59 Nickel Silver ( C) 1120000N590-000
3 1.25 .606 .099 .100 59 Nickel Gold ( C) 1120000N590-004
4 1.15 .562 .099 .100 ** Nickel Silver ( C) 1120000N591-000
C holes, A dia. x B deep C holes, A dia. x B deep H
.120 dia.
E
D dia. b.c.
.750 D
dia. dia. b.c.
F
.140 dia.
Socket contact E dia. x F deep H .875 dia. G
G
Figure 1 Figure 2
Dimensions Plating
Figure Delta P/N
1 #2-56 .250 7 .560 #0-80 .125 .734 .422 Nickel Silver 1156000N000-000
1 .078 .313 7 .500 .063 .156 .734 .656 Nickel Silver 1156000N000-002
1 #2-56 .250 7 .560 #2-56 .125 .734 .422 Nickel Silver 1156000N000-003
2 #2-56 .125 10 .734 .125 .010 .816 .125 Nickel Silver 1157000N000-003

N Receptacles
Press Mount Jack Receptacles
Component housing
These connectors eliminate the need for complicated mounting hole patterns and mounting
hardware. They are simply pressed into a single through hole, and the precisely-engineered
knurled mounting section provides retention strength far greater than normal mating and
unmating forces.
An integral shoulder provides a positive stop when mounting. Internal
PressMounts can be used in packages as small as the outer diameter of the connector body.
Circuitry
.625 dia. .587 .625 dia. .587

A A
Figure 1 Figure 2
(Post contact) (Tab contact)
B dia. Tab
B thick x
.454 .454 .120 wide
dia. over knurl .25 dia. over knurl
.25
.625 dia. A .587
C ( I.D. )
Figure 3
.454 .120 dia.

dia. over knurl .25
Figure Delta P/N
2 .100 .005/.008 .200 .450 ±.001 dia. Nickel Gold ( C ) 1120000N911-003
Press Mount Plug Receptacles

.95 .95
A A
Figure 1 Figure 2
(Post contact) (Tab contact)
B dia. Tab
B thick x
.120 wide
.454 .454
.95
A
C ( I.D. )
Figure 3
.120 dia.
.454
dia. over knurl .25

Figure Delta P/N
2 .100 .005/.008 .200 .450 ±.001 dia. Nickel Gold ( C ) 1124000N911-002

N Accessories
Resistive Plug Termination
C ( I.D. )
Dimensions Plating
Resistor Features Delta P/N
A B C Body Contact
50 Ω ±1%, 1 Watt 1.78 .— .— No chain Nickel Silver ( C) 1151000N000-003
50 Ω ±1 % , 1 W att 1. 87 5. 00 . 144 Nickel Gold ( C) 1151000N000-010
51 Ω ±5%, 1/2 W a t t 1. 61 3. 50 . 144 Nickel Silver ( C) 1131000N000-000
51 Ω ±5%, 1/2 Watt 1.67 .— .— No chain Nickel Silver ( C) 1131000N00A-000
51 Ω ±5 % , 1 W att 1. 87 3. 75 . 144 Nickel Silver ( C) 1151000N000-000
75 Ω ±1 % , 1 W att 1. 87 5. 00 . 144 Nickel Gold ( C) 1151000N000-011
Dust Caps
A A
C ( I.D. ) C ( I.D. )
B B
Figure 1 Figure 2
(Shown with safety chain) (Shown with bead chain)
Dimensions Plating
A B C Body Contact
1 .560 2.25 .144 Bead chain Nickel — MX-913/U
1 .840 2.50 .170 Bead chain / shorting type Nickel Silver ( C) 1132000N00C-002
2 .910 2.50 .170 Bead chain / shorting type Nickel Silver ( C) 1133000N00C-000
• Caps and terminations are available with other chain styles and/or resistances.

N Adapters
Bulkhead & Panel Mounted Jack - Jack Adapters (Connect Two Plugs)
.875 B
B dia.
A A
Figure 1 Figure 2
(Bulkhead mount, hermetically sealed) (Panel mount)

Figure Delta P/N
A B Panel Figure Body Contact
1 1.54 .863 .250 72 Nickel Silver ( C) UG-30D/U
1 1.54 .863 .250 72 Nickel Silver ( C) UG-30E/U
1 1.54 .863 .250 72 Silver Gold ( C) M55339/04-00030
1 2.06 1.375 .750 72 Nickel Silver ( C) 1126000N728-000
2 1.75 1.00 .— 33 Nickel Silver ( C) 1125000N330-000
Straight Adapters
B dia. B dia.
Figure 1 Figure 2
A
A
B dia.
Figure 3
(Straight jack–plug;
connects one plug
and one jack)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.75 .660 Silver Gold ( C) M55339/07-00029
2 1.59 .780 Silver Gold ( C) M55339/05-00057 *
3 1.56 .780 Nickel Silver ( C) 1134000N000-000

N Adapters
Right Angle Adapters
B B
B
.875 dia.
.92
A A
A
(Right angle plug–jack; (Right angle plug–plug; (Bulkhead mounted right angle jack–jack;
connects one plug connects two jacks) connects two plugs)
and one jack)

Figure Delta P/N
1 1.30 1.38 .— .— Nickel Silver ( C) UG-27C/U
1 1.30 1.38 .— .— Nickel Gold ( C) UG-27D/U
1 1.30 1.38 .— .— Silver Gold ( C) M55339/03-00027 *
2 1.39 1.39 .— .— Nickel Silver ( C) 1137000N000-000
3 2.13 1.36 .250 72 Nickel Gold ( C) UG-202A/U
Tee Adapters
B
B B
A A A
(Tee jack–jack–jack; (Tee jack–plug–jack; (Tee jack–jack–plug;
connects three plugs) connects two plugs and one jack) connects two plugs and one jack)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.75 1.22 Silver Gold ( C) M55339/06-00028
2 1.75 1.47 Silver Gold ( C) M55339/06-00001
3 2.03 1.22 Nickel Gold ( C) 1149000N001-001

N70 Connectors
N70 Configurations
Straight Cable Plugs ....................................................89 Right Angle Panel Jack Receptacles .....................90
Straight Cable Jacks .....................................................89 Panel Plug Receptacles..............................................90
Bulkhead Cable Jacks ..................................................89 Bulkhead Jack Receptacles ......................................90
Panel Jack Receptacles (square flange) ................90 In-Series Adapters ........................................................91

B dia.
B dia.
Figure 1 Figure 2
A A

Figure Delta P/N
2B, 3B 1 1.80 .690 Nickel Silver UG-94A/U C/01
7 2 1.38 .500 Nickel Silver 1801021N000-000 A/02

B dia. B dia.
Figure 1 Figure 2
A
A
Figure Delta P/N
2B, 3B 1 1.88 .690 Nickel Gold UG-95A/U C/08
7 2 1.41 .500 Nickel Silver 1808021N000-000 A/02
Bulkhead Jacks - For Flexible Cable
Figure 1 Figure 2
(Military clamp) (Crimp)
C
C dia. B .875 dia. (crimp sleeve)
B .875 dia.
A A

2B, 3B 1 1.84 .920 .690 72 .250 Nickel Gold 1816003N720-000 C/08
7 1 1.47 .920 .500 72 .250 Nickel Silver ( C ) 1816021N721-000 A/14
2B, 3B 2 1.84 .920 .600 72 .250 Nickel Gold 1819003N720-000 B/03
7 2 1.59 .920 .500 72 .250 Nickel Silver 1819020N720-000 B/14

N70 Receptacles
Panel Receptacle - Solder Pot Contact
D D
.083 dia. .083 dia.
C ( I.D. ) C ( I.D. )
B B
A A
Figure 1 Figure 2
(Straight jack receptacle) (Straight plug receptacle)
.083 dia.
D ( I.D. ) A
C
B
Figure 3
(Right angle jack receptacle)

Figure Delta P/N
1 1.13 .660 .062 .080 33 Nickel Gold ( C) 1813000N331-000
2 1.10 .720 .062 .080 33 Nickel Silver ( C) 1823000N331-001
3 1.41 1.16 .300 .050 33 Nickel Gold ( C) 1815000N330-000
Bulkhead Receptacle - Sodler Pot Contact

D max. panel
C ( I.D. )
.812 dia. B
A
Figure 1
(Front mount, hermetically sealed)

Figure Delta P/N
1 1.62 .707 .099 .250 72 Nickel Silver ( C ) 1820000N728-000


N70 Adapters
Straight Adapters
B dia. B dia.
Figure 1 Figure 2
A
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.75 .660 Nickel Gold ( C ) 1828000N000-000
2 1.59 .780 Nickel Gold ( C ) 1827000N000-000
Figure 1
(Right angle jack–plug; B
B
B
A A
Figure 2 Figure 3
(Tee jack–jack–jack; (Tee jack–plug–jack;
connects three plugs) connects two plugs and one jack)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.30 1.38 Nickel Gold ( C ) 1829000N000-000
2 1.75 1.22 Nickel Gold ( C ) 1838000N000-000
3 1.75 1.47 Nickel Gold ( C ) 1830000N000-000

QDS Connectors
General Description
Delta QDS series connectors are medium-size, 50 Ω impedance connectors with positive-locking, push-on coupling
and good power handling capability. Because they mate with a straight push and unmate with a straight pull, QDS
connectors are ideal for use in applications where the use of a torque wrench for mating is impractical.
As with our other connector series, Delta’s customer-driven design results in QDS series connectors with practical and
• Standard Albaloy body plating (see page 6 for details), which has the same low intermodulation distortion as silver
plating, with the durability of nickel plating. Note: QDS connectors with UG designations have silver-plated bodies to
conform to military specifications, but are available with Albaloy body plating.
• Color bands on plug connectors for positive visual confirmation of proper mating.
• A new series of MiniQDS connectors, similar in size to BNC and TNC connectors, but with the same convenient
push-on, positive-locking mating as QDS connectors (see page 66).
• Cable plugs and jacks for armored cables.
Our QDS series product line is still growing, so please call if you don’t see what you need.
QDS Configurations
Straight Cable Plugs ...............................................93 Panel Jack Receptacles (square flange) ................95
Right Angle Cable Plugs .......................................93 Bulkhead Jack Receptacles .......................................95
Bulkhead Cable Jacks .............................................94 Resistive Terminations .................................................96
Panel Cable Jacks .....................................................94 Between-Series Adapters...........................................96
QDS Specifications*
Reference
Electrical:
Plane Nominal Impedance: 50 ohms.
.007 min. Frequency Range: DC–11 GHz (usable);
.624 min. DC–2 GHz (recommended).
.276 min. Voltage Rating: 1,000 volts RMS.
.119
.124 .194 min. Dielectric Withstanding Voltage : 3,000 VRMS.
.050 max. Insulation Resistance: 5,000 megohms.
1.00
ref. Materials/Finishes:
.090
meet gage requirements Female Contacts: Beryllium Copper per
of MIL-PRF-39012/35. ASTM B196.
.003 Contact Plating : Silver per ASTM B700, or
.191 .040 Gold per MIL-DTL-45204.
.251
Plug Interface** Gaskets: Silicone rubber per ZZ-R-765,
Start of .307
taper .337 Class II, Grade 50.
.309 Other Metal Parts: Brass per ASTM B16, plated:
min.
Albaloy (contact factory
for specifications), or
Reference Silver per ASTM B700, or
Plane Nickel per AMS-QQ-N-290.
All other specifications are in accordance with the
Jack Interface** latest issues of MIL-PRF-39012, or MIL-C-18867, or
.190 max. other applicable MIL specifications, and interfaces are
in accordance with MIL-STD-348.
.374 max. .124
.411/.415
all connectors. Detailed specifications for individual
.007 max.
.482/.498 .273 connectors are available on request.
.623 max. .303
.309
max.

QDS Cable Plugs
B dia. B dia.
A A
Figure 1 Figure 2

Figure Delta P/N
2, 3 1 1.83 .750 Albaloy Gold 3801004Q000-001 A/02
5, 6 1 1.83 .750 Albaloy Gold 3801015Q000-001 A/02
15 2 2.16 .812 Silver Silver UG-968B/U D/04

A
B A
C dia.
Figure 1
A B
C dia.
Figure 3
C dia.
Figure 2

Figure Delta P/N
2, 3 1 1.93 1.85 .750 Albaloy Gold ( C ) 3805004Q000-000 A/31
5, 6 2 1.93 1.63 .500 Albaloy Gold ( C ) 3805015Q000-000 A/30
15 3 1.93 2.40 .812 Albaloy Gold ( C ) 3805006Q000-000 ***

QDS Cable Jacks
Figure 1 Figure 2
C dia. (Rear mount) (Rear mount)
C dia.
B B 1" hex
A 1" hex A
C dia.
Figure 3
(Rear mount; 1" hex
Includes armor clamp)
B
A
2, 3 1 1.66 .865 .750 51 .200 Albaloy Gold ( C ) 3816004Q511-001 A/01
5, 6 2 1.60 .865 .500 51 .200 Albaloy Gold ( C ) 3816015Q511-001 A/25
15 3 2.00 .865 .750 51 .200 Silver Silver UG-1132A/U D/04
C dia. Figure 1 Figure 2

C dia.
B B
A A
C dia.
Figure 3
B
A

2, 3 1 1.66 .690 .750 33 Albaloy Gold ( C ) 3811004Q331-000 A/01
5, 6 2 1.60 .690 .500 33 Albaloy Gold ( C ) 3811015Q331-000 A/25
15 3 2.00 .690 .750 33 Silver Silver UG-972B/U D/04

QDS Receptacles
.250 dia. D
.250 dia.
C ( I.D. )
C dia.
D .56 B
Figure 1 B Figure 2 A
(Solder pot contact) A (Post contact)
.250 dia.
D D
Tab C dia. .250 dia.
.025 C dia.
thick
CL
Slot
.065
.100 wide
.420 B .100 B
Figure 3 A Figure 4 A
(Tab contact) (Slotted contact)
Also available with other contact/insulator configurations and flange sizes

Figure Delta P/N
1 1.08 .670 .106 .080 33 Albaloy Gold ( C) 3813000Q331-000
2 1.31 .670 .120 .080 33 Albaloy Gold ( C) 3858000Q331-001
3 1.17 .670 .120 .080 33 Albaloy Gold ( C) 3858000Q331-003
4 1.00 .670 .120 .080 33 Albaloy Gold ( C) 3858000Q331-002
C ( I.D. )
1" hex
Figure 1
(Rear mount, with mounting gasket)
B
A
Also available with post, slotted, or tab contact

Figure Delta P/N
1 1.08 .750 .106 .125 51 Silver Silver ( C ) UG-1111/U
1 1.08 .750 .106 .125 51 Albaloy Gold ( C ) 3816000Q511-002

QDS Accessories / Adapters
Resistive Termination
A
C ( I.D. )
B dia.
A B
Figure 1 Figure 2
(Jack type) (Plug type)
Dimensions Plating
Fig. Resistor Features Delta P/N
A B C Body Contact
1 50 Ω ±1%, .5 Watt 1.50 .630 .— No chain Silver Gold ( C ) 3831000A00A-000
2 50 Ω ±1%, 1 Watt 1.75 2.50 .144 Bead chain Silver Gold ( C ) 3851000A000-000
Adapters Between Series
Figure 1
(QDS jack to N jack,
bulkhead mounted)
B 1" hex
A
Mounting figure 51; .200" max. panel
Figure 2
B dia.
(QDS jack to N plug)
Figure 3
(QDS plug to N jack) B dia.
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.52 .865 Albaloy Gold ( C ) 2226000Q511-001
2 1.38 .780 Albaloy Gold ( C ) 2234000Q001-131
3 1.67 1.00 Silver Silver ( C ) UG-1144/U

QMA Connectors
General Description
Delta QMA jacks are connectors with size and performance similar to SMA connectors, but with a snap-on interface for
quick mating and unmating, and brass body construction for economy. Designed to mate with all QMA plugs, they offer
good electrical performance up to 6 GHz.
The PressMount mounting configuration (see below) allows QMA receptacles to be mounted securely in a single through
hole, with center-to-center spacing as little as .325 inch. New types are being added to our product line, so please call
with your requirements for other QMA configurations.
QMA Jack Specifications*

Electrical: Mechanical:
Nominal Impedance: 50 ohms. Durability: 100 mating cycles.
Frequency Range: DC–6 GHz. Force to Engage: 26 N. Jack Interface**
Voltage Rating: 335 volts RMS (dependent on cable). Force to Disengage: 20 N. .159 ref. ø.219 ±.001
Dielectric Withstanding Voltage : 1,000 volts RMS.
Insulation Resistance: 5,000 megohms. .049
VSWR: DC–3 GHz: 1.06:1 max; 3–6 GHz: 1.12:1 max. ø.194 .051
±.001
Materials/Finishes:
Insulators: Teflon per ASTM D1710.
Female Contacts: Beryllium Copper per ASTM B196. 15˚ .012 ref.
Contact Plating : Gold per MIL-DTL-45204.
Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50. to .010 below end of body
Other Metal Parts: Brass per ASTM B16, gold plated per MIL-DTL-45204. **Some proportions altered to illustrate detail.
*These specifications are typical and may not apply to all connectors. Dimensions in inches.
Detailed specifications for individual connectors are available on request.
QMA Press Mount Receptacles - Post Contact

.300 dia. .208 .025
.050 dia.
.270 .165 .392
dia. over knurl
Plating
Minimum Panel Thickness Mounting Hole Diameter Delta P/N
Body Contact
.100 .267 ± .001 Gold* Gold ( C) 4220000G911-000
Panel Jack Receptacles

.160
.160
.065 .065
.050 .050
A (CBL )
dia. dia.
B (CL ) typ.
C C
dia. dia. typ. .162 dia.
typ. .162 dia.
A sq.
.520 .223
.260 .260 .520
Figure 1 (Square flange) Figure 2 (Two-hole flange)

Figure Delta P/N
1 .500 .340 .102 05 Gold* Gold ( C ) 4258000G051-009
2 .625 .481 .102 92 Gold* Gold ( C ) 4258000G921-006
• * Also available with Albaloy-plated body—change G in Delta part number to Q.


SC Connectors
General Description
Delta SC series connectors are medium-size, 50Ω impedance connectors with 11 ⁄16 -24 threaded coupling and good power
handling capability, particularly those connectors noted as high-voltage types.
The interface is similar to type C, except with a threaded coupling instead of bayonet. They are best suited for use
with cables in the range of .350" to .450" diameter, but are available for other cables from .200" to over 1" diameter.
Our extensive line of SC receptacles includes configurations for virtually any packaging requirement, and we can supply
any adapter or accessory you need to complete your system design. Adapters between SC and other series are shown
starting on page 176.
SC Configurations
Straight Cable Plugs..................................................99
Right Angle Cable Plugs..........................................99
Panel Jack Receptacles (square flange) ..........100
Panel Plug Receptacles..........................................100
Dummy Receptacles ..............................................100
Dust Caps ...................................................................100
In-Series Adapters ..................................................101
SC Specifications*
Electrical:
Jack Interface** Nominal Impedance: 50 ohms.
Reference Frequency Range: DC–11 GHz (standard);
Plane DC–2 GHz (high-voltage types).
.491/.495
.630 max. Voltage Rating: 1,000 volts RMS (standard);
.411/.415
.047/.077 4,000 volts RMS (high-voltage types).
Dielectric Withstanding
Voltage: 3,000 volts RMS (standard);
6,000 volts RMS (high-voltage types);
.190 max. .272 max. 1,500 volts RMS (when used with RG-142).
.119/.124
.374 max. Materials/Finishes:
.007 max. Insulators: Teflon per ASTM D1710.
.482/.498 .273
.6875-24 UNEF-2A,
.303
.309 max. Male Contacts: Brass per ASTM B16.
.250 min. full thread Female Contacts: Beryllium Copper per ASTM B196.
Contact Plating: Silver per ASTM B700, or
Reference
.6875-24 UNEF-2B, Plane Other Metal Parts: Brass per ASTM B16
.250 min. full thread
.007 min. Plated: Silver per ASTM B700, or
.213/.223 .690 min. Nickel per AMS-QQ-N-290.
.276 min. All other specifications are in accordance with the latest
.194 min. issues of MIL-PRF-39012, or MIL-A-55339, or other
.050 max. applicable MIL specifications, and interfaces are in
.828 accordance with MIL-STD-348.
max.
.090 *These specifications are typical and may not apply to all
.119 .092
.124
connectors. Detailed specifications for individual connectors
are available on request.
meet gage requirements
.003 of MIL-PRF-39012/35.
.191 .040
.251 .025
Start of .307 .085
taper .337
.309 Plug Interface**
min.

SC Cable Plugs
B dia.
B dia.
A A
Figure 1 Figure 2

Figure Delta P/N
2, 3 1 1.47 .750 Nickel Silver 1901004N000-001 A/01
2, 3 1 1.78 .750 Nickel Silver 1901004N000-000 * A/21
2, 3 1 1.78 .750 Nickel Silver ( C ) 1901004N001-000 * A/28
5, 6 2 1.53 .500 Nickel Silver 1901015N000-000 A/17
* High voltage type.
B
B
.75 dia.
.50 dia.
A A
Figure 1 Figure 2

Figure Delta P/N
2, 3 1 1.56 1.94 Nickel Silver ( C ) 1904004N000-000 * A/21
5, 6 2 1.45 1.75 Nickel Silver 1905015N001-002 A/17
* High voltage type.

SC Receptacles
Panel Receptacle - Solder Pot Contact
D D
C ( I.D. ) C ( I.D. )
B B
A A
Figure 1 Figure 2
(Panel jack receptacle) (Panel jack receptacle, high voltage type)
D C
C ( I.D. )
B
B
A .812 hex A
Figure 3 Figure 4
(Panel plug receptacle) (Dummy receptacle)

Figure Delta P/N
1 1.25 .910 .106 .080 26 Nickel Silver ( C) 1913000N261-001
1 1.25 .910 .102 .080 33 Nickel Gold ( C) 1913000N331-002
2 1.50 .910 .106 .080 26 Nickel Silver ( C) 1913000N261-002
3 1.16 .860 .102 .080 33 Nickel Gold ( C) 1923000N331-000
4 .900 .820 .080 .— 33 Nickel — 1963000N330-000
Dust Cap
C ( I.D. )
B
Figure 1
Dimensions Plating
A B C Body Contact


SC Adapters
Bulkhead Jack - Jack Adapters
B
A C hex
(Connects two plugs, hermetically sealed)

Delta P/N
1.84 1.00 1.00 .125 51 Nickel Gold ( C ) 1926000N518-000
B
dia.
A A
Figure 1 Figure 2
Lockwire holes (3)
A
Figure 3 A
connects one plug and one jack) Figure 4
(Right angle jack–plug;
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.64 .75 Nickel Silver ( C) 1928000N000-000
2 1.75 .— Nickel Silver ( C) 1927000N000-000
3 2.05 .— Nickel Gold ( C) 1934000N000-001
4 1.46 1.48 Nickel Gold ( C) 1935000N000-001

SMA Connectors
General Description
Delta SMA connectors are subminiature, precision, 50 Ω impedance connectors with 1 ⁄4 "-36 threaded coupling.
They are best suited for use with high-frequency semi-rigid cables in demanding applications up to 18 GHz, or
miniature flexible cables up to 12.4 GHz. Our extensive line of SMA receptacles includes configurations for virtually
any packaging requirement, and we can supply any adapter or accessory you may need to complete your system design.
Adapters between SMA and other series are shown starting on page 176. Many of our SMA connectors are available as
MIL-PRF-39012 QPL versions. These types are listed starting on page 195.
As with our other connector series, Delta’s customer-driven design results in SMA series connectors with practical and
• One-Step cable connectors for quick, accurate assembly to semi-rigid cable.
• Panel receptacles with flange sizes to match the same hole pattern as standard BNC, TNC or N connectors, letting you
• Edge-mount P.C. board receptacles (page 114).
• Our new E-Line brass SMA connectors provide a lower-cost alternative for commercial applications (page 123).
Our SMA series product line is still growing, so please call if you don’t see what you need.
SMA Configuration
Cable Plugs for Semi-Rigid Cable .................................103 Right Angle Panel Jack Receptacles ............................112
Cable Plugs for Flexible Cable .......................................104 Stripline Receptacles.........................................................112
Straight Cable Jacks for Semi-Rigid Cable .................105 Bulkhead Jack Receptacles .............................................113
Bulkhead Cable Jacks for Semi-Rigid Cable ..............105 P.C. Board Receptacles (Through-Hole Mount).......113
Panel Cable Jacks for Semi-Rigid Cable ......................105 P.C. Board Receptacles (Edge Mount).........................114
Straight Cable Jacks for Flexible Cable .......................106 PressMount Receptacles .................................................115
Bulkhead Cable Jacks for Flexible Cable ....................106 Panel Plug Receptacles ....................................................116
Straight Panel Jack Receptacles....................................107 Dust Caps...............................................................................120
Panel Jack Receptacles for Microstrip .........................111 In-Series Adapters..............................................................121
SMA Specifications*
Plug Interface** .135 max. Nominal Impedance: 50 ohms.
.015/.045 Frequency Range: DC–18 GHz (with semi-rigid cable);
.1808 max. DC–12.4 GHz (with flexible cable).
Voltage Rating: 335–500 volts RMS (dependent on cable).
.0355/.0370
.250-36 UNS-2B, Dielectric Withstanding
.130 min.
full thread Voltage : 500–1500 volts RMS (dependent on cable).
Materials/Finishes:
Contact shoulder projection
.000 max; recession .010 max. Insulator projection .000 max. Male Contacts: Brass per ASTM B16, or
.100 max. Beryllium Copper per ASTM B196.
Jack Interface** .250-36 UNS-2A,
.074/.078 .170 min. full thread Gaskets: Silicone rubber per ZZ-R-765,Class II, Grade 50.
.218 min. Other Metal Parts: Stainless steel per ASTM A582, plated gold per
.015/.045
MIL-DTL-45204 or passivated to meet corrosion requirements of MIL-
.049 PRF-39012; or Brass per ASTM B16: plated gold per MIL-DTL-45204.
.051
.208 .1810 All other specifications are in accordance with the latest issues
.216 min.
of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL
specifications, and interfaces are in accordance with MIL-STD-348.
Insulator projection .000 max. Contact projection .000 max; *These specifications are typical and may not apply to all
**Some proportions
recession .010 max. connectors. Detailed specifications for individual connectors
altered to illustrate detail. are available on request.
Reference Plane

SMA Cable Plugs
Straight Plug - For Semi-Rigid Cable
B .250 hex B hex

(Direct solder) (Direct solder) (Solder-clamp)
A A A
Delta One-Step Cable Attachment for Semi-Rigid Cable B

Solder Delta “One-Step” connectors feature
Cable captivated contacts and insulators to
allow rapid, easy assembly to semi-rigid
cable—simply trim the cable jacket and
dielectric flush, chamfer the center con- A
ductor, insert into the connector, and Figure 4
solder the jacket to the connector body. (One-Step cable attachment)

Figure Delta P/N
13 1 .330 .— Gold None ( 2) 1301031G003-000 G/01
13 1 .330 .— Gold/PCN ( 1) None ( 2) 1301031K003-000 G/01
13 2 .330 .445 Gold None ( 2) 1301031G003-002 G/01
13 2 .330 .445 Gold/PCN ( 1) None ( 2) 1301031K003-002 G/01
13 2 .330 .445 Gold Gold 1301031G003-003 H/01
13 2 .330 .445 Gold/PCN ( 1) Gold 1301031K003-012 H/01
13 3 .680 .312 Gold Gold ( C ) 1301031G007-000 ***
13 4 .330 .430 Gold/PCN ( 1) Gold ( C ) 1301031K003-008 I/01
14 2 .330 .445 Gold Gold 1301094G003-000 H/01
14 2 .330 .445 Gold/PCN ( 1) Gold 1301094K003-000 H/01
14 3 .680 .312 Gold Gold ( C ) 1301025G007-000 ***
14 4 .330 .430 Gold/PCN ( 1) Gold ( C ) 1301094K003-001 I/01
( 1) Gold-plated body and passivated coupling nut. ( 2) Cable center conductor used as contact.
Right Angle Plug - For Semi-Rigid Cable

A A
Figure 1 Figure 2
(Direct solder) B (One-Step cable attachment) B

Figure Delta P/N
13 1 .680 .430 Gold Gold ( C ) 1305031G003-000 J/01
13 1 .680 .430 Gold/PCN ( 1) Gold ( C ) 1305031K003-000 J/01
13 2 .570 .580 Gold Gold ( C ) 1305031G003-002 I/01
13 2 .570 .580 Gold/PCN ( 1) Gold ( C ) 1305031K003-004 I/01
14 1 .680 .430 Gold Gold ( C ) 1305025G003-000 J/01
14 1 .680 .430 Gold/PCN ( 1) Gold ( C ) 1305025K003-000 J/01
14 2 .570 .580 Gold Gold ( C ) 1305094G003-003 I/01
14 2 .570 .580 Gold/PCN ( 1) Gold ( C ) 1305094K003-005 I/01
( 1) Gold-plated body and passivated coupling nut.

SMA Cable Plugs
C max. C hex
Figure 1 Figure 2
(Crimp type, shown with (Clamp type)
supplied heat-shrink tubing)
A A
B B
(to end of crimp sleeve)
See page 194 for MIL-PRF-39012 QPL version.

Figure Delta P/N
5 1 .330 .700 1.187 Gold Gold 1303017G000-000 K/02
5 1 .330 .700 1.187 Passivated Gold 1303017K000-000 K/02
6 1 .330 .700 1.187 Gold Gold 1303013G000-000 K/02
9 1 .330 .700 1.187 Gold Gold 1303036G000-000 K/02
10 1 .330 .700 1.187 Gold Gold 1303100G000-002 K/02
5, 6 2 .330 .750 .312 Gold Gold ( C ) 1301015G005-000 ***
5, 6 2 .330 .750 .312 Passivated Gold ( C ) 1301015K005-000 ***
9 2 .330 .750 .312 Gold Gold ( C ) 1301037G005-000 ***
9 2 .330 .750 .312 Passivated Gold ( C ) 1301037K005-000 ***
Right Angle Plug - For Flexible Cable

A
B
Figure 1 (to end of
crimp sleeve)
(Crimp type, shown with C max.
supplied heat-shrink tubing)

Figure Delta P/N
5 1 .680 .600 1.06 Gold Gold ( C) 1307017G001-000 L/03
5 1 .680 .600 1.06 Passivated Gold ( C) 1307017K001-000 L/03
6 1 .680 .600 1.06 Gold Gold ( C) 1307013G001-000 L/03
9 1 .680 .600 1.06 Gold Gold ( C) 1307036G001-000 L/03
10 1 .680 .600 1.06 Gold Gold ( C) 1307100G001-000 L/03
11 1 .680 .600 1.06 Gold Gold ( C) 1307038G001-000 L/03

SMA Cable Jacks
Straight Jack - For Semi-Rigid Cable
.250 hex B hex
B hex B hex
(Direct solder) (Solder-clamp) (One-Step
cable attachment)
A A A

Figure Delta P/N
13 1 .500 .250 Gold Gold 1308031G003-002 H/01
13 2 .680 .312 Gold Gold ( C) 1308031G007-000 ***
13 3 .500 .250 Gold Gold ( C) 1308031G003-004 I/01
14 1 .500 .250 Gold Gold 1308094G003-000 H/01
14 2 .680 .312 Gold Gold ( C) 1308025G007-000 ***
14 3 .500 .250 Gold Gold ( C) 1308094G003-001 I/01
Panel Bulkhead Jacks - For Semi-Rigid Cable

A A
Figure 1 Figure 2
(Direct solder) (One-Step cable attachment)
C C
B B
A A
A
C hex .093 C
.093 C hex max. panel
B hex .093 C hex
max. panel max. panel
B B
(Direct solder, (Solder-clamp, (One-Step cable attachment,
with mounting gasket) no mounting gasket) with mounting gasket)
Solder Delta “One-Step” connectors feature captivated contacts and

Delta One-Step Cable insulators to allow rapid, easy assembly to semi-rigid cable—
Cable Attachment simply trim the cable jacket and dielectric flush, chamfer the
for Semi-Rigid Cable center conductor, insert into the connector, and solder the
jacket to the connector body.

13 1 .560 .375 .065 05 Gold Gold 1311031G053-000 H/01
13 2 .500 .375 .065 05 Gold Gold ( C) 1311031G053-003 I/01
13 3 .750 .415 .437 67 Gold Gold 1317031G673-000 H/02
13 4 .750 .440 .312 67 Gold Gold ( C) 1317031G677-000 ***
13 5 .700 .415 .437 67 Gold Gold ( C) 1317031G673-003 I/01
14 1 .500 .375 .065 05 Gold Gold 1311025G053-000 H/01
14 2 .500 .375 .065 05 Gold Gold ( C) 1311025G053-001 I/01
14 3 .750 .415 .437 67 Gold Gold 1317025G673-000 H/02
14 4 .750 .440 .312 67 Gold Gold ( C) 1317025G677-000 ***
14 5 .750 .415 .437 67 Gold Gold ( C) 1317025G673-001 I/01

SMA Cable Jacks
Straight Jack - For Flexible Cable
B max.
A C
(to end of crimp sleeve) hex
Figure 1
(Crimp type, shown with supplied heat-shrink tubing)

Figure Delta P/N
5 1 .800 1.125 .250 Gold Gold 1308017G000-000 K/03
5 1 .800 1.125 .250 Passivated Gold 1308017K000-000 K/03
6 1 .800 1.125 .250 Gold Gold 1308013G000-000 K/03
9 1 .800 1.125 .250 Gold Gold 1308037G000-000 K/03
Bulkhead Jack - For Flexible Cable

C max.
B
(to end of crimp sleeve)
A A max.
B
.312 .312
hex hex
.125 max. panel C hex .125 max. panel
Figure 1 Figure 2
(Crimp type, shown with supplied heat-shrink tubing) (Clamp type)

5 1 .450 .940 1.25 67 Gold Gold 1319017G670-000 K/04
5 1 .450 .940 1.25 67 Passivated Gold 1319017K670-000 K/04
6 1 .450 .940 1.25 67 Gold Gold 1319013G670-000 K/04
9 1 .450 .940 1.25 67 Gold Gold 1319037G670-000 K/04
10 1 .450 .940 1.25 67 Gold Gold 1319100G670-000 K/04
5, 6 2 .850 .450 .312 67 Gold Gold ( C) 1316015G675-000 ***
5, 6 2 .850 .450 .312 67 Passivated Gold ( C) 1316015K675-000 ***
9 2 .850 .450 .312 67 Gold Gold ( C) 1316037G675-000 ***
9 2 .850 .450 .312 67 Passivated Gold ( C) 1316037K675-000 ***

SMA Receptacles
.58
C .065
dia. typ. .58
C
B (CL ) typ. dia. typ.
.032
( I.D. ) .050
A dia.
square .375
Figure 1 B
( 3/ 8 " square flange) (CL ) typ.
.032
( I.D. ) .050
dia.
.58
C .065 .065
dia. typ.
A .375
B (CL ) typ. square
.032 Figure 4
( I.D. ) .050 (1" square flange, interchangeable
dia.
A .375 with type N standard flange size)
square
Figure 2
( 1/ 2 " square flange, SMA standard flange size)
See page 197 for MIL-PRF-39012 QPL version. .58
.102 C
dia. typ.
.58
C .032
dia. typ. .065 A B (CL ) ( I.D. )
.050 dia.
B .162 dia.
(CL ) typ. .065
.032 .223 .375
( I.D. ) .050
dia. Figure 5
(2-hole flange)
A .375
square
Figure 3
( 11/ 16 " square flange, interchangeable with

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold ( C) 1313000G911-000
1 .375 .250 .067 91 Passivated Gold ( C) 1313000K911-000
2 .500 .340 .102 05 Gold Gold ( C) 1313000G051-000
3 .687 .500 .125 09 Gold Gold ( C) 1313000G091-000
4 1.00 .718 .125 33 Gold Gold ( C) 1313000G331-000
4 1.00 .718 .125 33 Passivated Gold ( C) 1313000K331-000
5 .625 .481 .025 92 Gold Gold ( C) 1313000G921-000
5 .625 .481 .000 92 Gold Gold ( C) 1313000G921-002
• See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact (epoxy captivated).
• All items available with other flange, contact, and insulator configurations.

SMA Receptacles
Panel Jack Receptacle - Tab Contact
C dia. typ. .065
Tab
B (CL ) typ. .004/.007 .065
thick x
.050 wide
A sq. .100 .375 Tab
B .004/.007
Figure 1 (CL ) typ. thick x
( 3/ 8 " square flange) .050 wide
C
C dia. typ. dia. typ.
.065
Tab
A square .100 .375
B (CL ) typ. .004/.007
thick x
.050 wide Figure 4
(1" square flange, interchangeable
A sq. .100 .375 with type N standard flange size)
Figure 2
C C
dia. typ. .065 dia. typ.
.065
Tab Tab
B
A (CBL )
.004/.007 .004/.007
(CL ) typ. thick x thick x
.050 wide .050 wide
A sq. .100 .375 .223 .100 .375

Figure 3 Figure 5
( 11/ 16 " square flange, interchangeable with (2-hole flange)

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1358000G910-002
1 .375 .250 .067 91 Passivated Gold 1358000K910-002
1 .375 .250 .067 91 Gold Gold ( C) 1358000G911-059
2 .500 .340 .102 05 Gold Gold 1358000G050-005
2 .500 .340 .102 05 Gold Gold ( C) 1358000G051-003
3 .687 .500 .125 09 Gold Gold 1358000G090-001
3 .687 .500 .125 09 Gold Gold ( C) 1358000G091-008
4 1.00 .718 .125 33 Gold Gold 1358000G330-001
4 1.00 .718 .125 33 Passivated Gold 1358000K330-001
4 1.00 .718 .125 33 Gold Gold ( C) 1358000G331-002
5 .625 .481 .102 92 Gold Gold 1358000G920-003
5 .625 .481 .102 92 Gold Gold ( C) 1358000G921-063

SMA Receptacles
Panel Jack Receptacle - Slotted Contact
.050 dia. .065

C C
dia. typ. .065
B (CL ) typ. dia. Slot
typ. .012 wide
(+.003, -.001) .050 dia.
A sq. .050 .375 B
Figure 1 (CL ) typ.
Slot
( 3/ 8 " square flange) .012 wide
(+.003, -.001)
.065
.050 dia.
C A sq. .050 .375
B (CL ) typ. dia.
typ. Figure 4
Slot
.012 wide (1" square flange, interchangeable
(+.003, -.001) with type N standard flange size)
A sq. .050 .375
Figure 2 C dia. typ.
( 1/ 2 " square flange, SMA standard flange size) .065
.050 dia.
C dia. typ. A (CBL )

.065 Slot
.050 dia. .012 wide
(+.003, -.001)
B
(CL ) typ. .223 .050 .375
Slot
.012 wide Figure 5
(+.003, -.001)
(2-hole flange)
A sq. .050 .375
Figure 3 Other Standard Slot Widths
( 11/ 16 " square flange, interchangeable with Our other standard slot widths for these connectors
BNC and TNC standard flange size) (.018" and .036") are readily available—call for part numbers.

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1343000G910-003
1 .375 .250 .067 91 Gold Gold ( C) 1343000G911-006
2 .500 .340 .102 05 Gold Gold 1343000G050-006
2 .500 .340 .102 05 Gold Gold ( C) 1343000G051-021
3 .687 .500 .125 09 Gold Gold 1343000G090-001
3 .687 .500 .125 09 Gold Gold ( C) 1343000G091-006
4 1.00 .718 .125 33 Gold Gold 1343000G330-006
4 1.00 .718 .125 33 Gold Gold ( C) 1343000G331-011
5 .625 .481 .102 92 Gold Gold 1343000G920-004
5 .625 .481 .102 92 Gold Gold ( C) 1343000G921-006

SMA Receptacles
Panel Jack Receptacle - Post Contact
.590 .065
.050
dia.
B (CL ) typ. .705
C
dia. .162 dia. .590
typ.
A sq. .705 .375
Figure 1 B
.050 .162
dia. dia.
.590 .065
.050 C .065
dia.
B (CL ) typ. dia. typ.
C A sq. .375
dia. .162 dia.
typ. Figure 4
A sq. .705 .375 (1" square flange, interchangeable
with type N standard flange size)
Figure 2
C .590
dia. .065 .590 .065
typ.
B C
(CL ) typ. dia. typ.
A (CBL )
.050 .162
dia. dia. .050 .162
dia. dia.
A sq. .705 .375
.223 .705 .375
Figure 3
( 11/ 16 "
square flange, interchangeable with Figure 5
BNC and TNC standard flange size) (2-hole flange)

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1358000G910-003
1 .375 .250 .067 91 Gold Gold ( C) 1358000G911-061
2 .500 .340 .102 05 Gold Gold 1358000G050-000
2 .500 .340 .102 05 Gold Gold ( C) 1358000G051-000
3 .687 .500 .125 09 Gold Gold 1358000G090-000
3 .687 .500 .125 09 Gold Gold ( C) 1358000G091-014
4 1.00 .718 .125 33 Gold Gold 1358000G330-000
4 1.00 .718 .125 33 Gold Gold ( C) 1358000G331-003
5 .625 .481 .102 92 Gold Gold 1358000G920-000
5 .625 .481 .102 92 Gold Gold ( C) 1358000G921-010

SMA Receptacles
Panel Jack Receptacle - Post Contact (For Microstrip)
.067 .085 dia. .065

dia.
typ.
B (CL ) typ. .125
.010 dia. dia. typ. .065
.050
A sq. C .375 .085 dia.
Figure 1 B
.010 dia.
.050
.065
.085 dia.
.102
B (CL ) typ. dia. typ. A sq. C .375
.010 dia.
.050 Figure 4
.375 (1" square flange, interchangeable
A sq. C
Figure 2
.125 dia. typ. .102

.065 dia. typ.
.085 dia. .065
.085 dia.
B
(CL ) typ. .010 dia. A (CBL )
.010 dia.
.050 .050
A sq. C .375 .223 C .375
Figure 3
( 11/ 16 " square flange, interchangeable with Figure 5
BNC and TNC standard flange size) (2-hole flange)

Figure Delta P/N
1 .375 .250 .057 91 Gold Gold ( C) 1358000G911-014
1 .375 .250 .125 91 Gold Gold ( C) 1358000G911-085
2 .500 .340 .057 05 Gold Gold ( C) 1358000G051-019
2 .500 .340 .125 05 Gold Gold ( C) 1358000G051-128
3 .687 .500 .057 09 Gold Gold ( C) 1358000G091-015
3 .687 .500 .125 09 Gold Gold ( C) 1358000G091-016
4 1.00 .718 .057 33 Gold Gold ( C) 1358000G331-004
4 1.00 .718 .125 33 Gold Gold ( C) 1358000G331-005
5 .625 .481 .057 92 Gold Gold ( C) 1358000G051-035
5 .625 .481 .125 92 Gold Gold ( C) 1358000G051-034

SMA Receptacles
Right Angle Panel Jack Receptacle
.340 .180 .340
(CL ) typ. C (CL ) typ. .505
.102 .505 C
dia. typ.
.500 .500
sq. sq.
.032 Tab A thick
( I.D. ) .59 x B wide
.59
A dia. B .102
dia. dia. typ.
Figure 1 (Solder pot contact) Figure 2 (Tab contact)

.340 .340 .705
(CL ) typ. .505 (CL ) typ. .505
C C
Slot
.500 A wide .500
sq. (+.003, -.001) sq.
B dia. .59 A dia. B dia. .59
.102 .102 dia. typ.
dia. typ.
Figure 3 (Slotted contact) Figure 4 (Post contact)
Figure Delta P/N
1 .050 .162 .062 05 Gold Gold ( C) 1315000G050-000
2 .004/.007 .050 .100 05 Gold Gold ( C) 1364000G051-015
2 .004/.007 .050 .100 05 Passivated Gold ( C) 1364000K051-015
3 .012 .050 .102 05 Gold Gold ( C) 1366000G051-017
3 .018 .050 .050 05 Gold Gold ( C) 1366000G051-018
3 .036 .050 .050 05 Gold Gold ( C) 1366000G051-019
4 .050 .162 .590 05 Gold Gold ( C) 1364000G051-016
Stripline Receptacle
C
8 holes, H thread .050 dia.
B
A
Figure 1 G dia. b.c. F dia.
D
E dia.
Dimensions Plating
Figure Delta P/N
1 .031 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-012
1 .031 .085 .375 .010 .072 .562 .438 #2-56 Passivated Gold 1357000K000-012
1 .063 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-002
1 .125 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-006

SMA Receptacles
C C
.032 See page 197 for .032
( I.D. ) MIL-PRF-39012 ( I.D. )
QPL version.
.050 dia. .050 dia.

.162 dia.
B .312 .162 dia. B
A hex A .437
hex
Figure 1 Figure 2
(Rear mount, solder pot contact, no mounting gasket) (Rear mount, solder pot contact, with mounting gasket)
C .160
.032 .280 .162 dia. C
( I.D. )
.050
See page 197 for dia.
MIL-PRF-39012
.050 dia. QPL version. .250
.312 .162 dia. B dia. B
hex A A
Figure 3 Figure 4
(Front mount, solder pot contact, no mounting gasket) (Round body, post contact)

Figure Delta P/N
1 .670 .450 .000 .125 67 Gold Gold ( C) 1320000G671-000
1 .670 .450 .000 .125 67 Passivated Gold ( C) 1320000K671-000
1 .670 .450 .062 .125 67 Gold Gold ( C) 1320000G821-002
2 .670 .415 .062 .093 67 Gold Gold ( C) 1320000G821-000
3 .670 .500 .062 .125 67 Gold Gold ( C) 1320000G671-005
4 .660 .500 .076 .125 82 Gold Gold 1321000G820-003
4 .660 .500 .076 .125 82 Passivated Gold 1321000K820-003
4 .660 .500 .076 .125 82 Gold Gold ( C) 1321000G821-000
4 .660 .500 .000 .125 82 Gold Gold ( C) 1321000G821-065
Printed-Circuit Board Receptacles - Through-Hole Mount

.250 .250
.200 sq. C .200 sq. B
(CL ) typ. .050 (CL ) typ. .050
dia. dia.
Figure 1 Figure 2
B A
.040 C
A .040
sq. typ. sq. typ.

Figure Delta P/N
A B C Board Figure Body Contact
1 .530 .375 .155 .125 PCB05 Gold Gold ( C ) 1367000G911-000
2 .583 .375 .155 .125 PCB05 Gold Gold ( C ) 1369000G000-000
See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other contact and insulator configurations.

SMA Receptacles
Delta Edge Mount Receptacles
These connectors eliminate the need for drilling P.C. boards for mounting. Edge mounting
provides design versatility, particularly in daughterboard configurations.
In addition, styles with bulkhead mounting allow P.C. boards to be attached directly to
component housings or panels, eliminating the expense of adapters, cable assemblies, and/or
additional board mounting hardware. Bulkhead mounted types are available with mounting
gaskets as an option (see picture).
Delta SMA edge mount receptacles feature gold-plated brass bodies for low cost, with gold-
plated beryllium copper center contacts. Insulators and contacts are mechanically
captivated to meet MIL-PRF-39012 requirements. All are available with stainless-steel bodies. Bulkhead jack with
mounting gasket
Edge Mount P.C. Board Receptacles - Bulkhead Jack

.050 (contact dia. .187 B
ush with insulator) .065 .375
A
.312
.040 typ.
.040 typ. D .250 dia.
.030 dia.
C (max. panel)
Board Dimensions Plating
Delta P/N
Thickness A B C D Body Contact
.042 .048 .500 .125 .093 Gold Gold ( C) 1367000G91P-021
.047 .053 .500 .125 .088 Gold Gold ( C) 1367000G91P-022
.062 .068 .500 .125 .073 Gold Gold ( C) 1367000G91P-006
.062 .068 .820 .425 .073 Gold Gold ( C) 1367000G91P-023
Edge Mount P.C. Board Receptacles - Straight Jack

.050 (contact dia. .375 .050 (contact dia. .375
ush with insulator) ush with insulator) .187
.187 .375 .065 .375
.065
A A
.312 .312
.040 typ. .040 typ.
B .250 dia. .040 typ. B .250 dia.

.040 typ.
.075
.030 dia. Figure 1 Tab contact
Figure 2
(Post contact) .020 wide (Tab contact)
x .010 thick

Figure Delta P/N
Thickness A B Body Contact
1 .042 .048 .093 Gold Gold ( C) 1367000G91P-026
1 .047 .053 .088 Gold Gold ( C) 1367000G91P-027
1 .062 .068 .073 Gold Gold ( C) 1367000G91P-000
2 .042 .048 .103 Gold Gold ( C) 1367000G91P-024
2 .047 .053 .098 Gold Gold ( C) 1367000G91P-025
2 .062 .068 .083 Gold Gold ( C) 1367000G91P-020
• (C) in contact plating column indicates captive contact (mechanical captivation). • See page 114 for plug types.

SMA Receptacles

These connectors eliminate the need for complicated mounting hole patterns and
mounting hardware.
They are simply pressed into a single through hole, and the precisely-engineered
knurled mounting section provides retention strength far greater than normal mating
and unmating forces. An integral shoulder provides a positive stop when mounting.
Internal
Circuitry PressMounts are available for a wide variety of Delta connector series, and can be used
in packages as small as the outer diameter of the connector body.
.300 dia. A .300 dia. A

Figure 1 Figure 2
(Post contact) (Post contact,
B dia.
brass body) B dia.
.270 .115 .270 .115 .650
.300 dia. A .394 dia. A

Figure 3 Tab Figure 4 Tab
B thick x .276 B thick x
(Tab contact) .050 wide (Tab contact,
brass body) .050 wide
.270 .115 .240 .167 .453

.300 dia. A .300 dia. A

Figure 5 Figure 6
(Solder pot contact) (Turret contact) B dia.
B ( I.D. ) .072
.115 .270 .115
.270 dia. over knurl .275
.437 dia. A .437 dia. A

Figure 7 Figure 8
(Plug, tab (Plug, post
contact) contact) B dia.
Tab
B thick x
.270 .050 wide .405 .270 .115

Figure Delta P/N
1 .062 .050 .100 .267 ±.001 dia. Passivated Gold ( C) 1320000K911-002
2 .390 .050 .100 .267 ±.001 dia. Gold Gold ( C) 1320000G911-076
3 .100 .005/.008 .100 .267 ±.001 dia. Passivated Gold ( C) 1320000K911-003
4 .120 .005/.008 .100 .237 ±.001 dia. Gold Gold ( C) 1320000G911-084
6 .465 .250 .100 .267 ±.001 dia. Gold Gold ( C) 1320000G911-085
6 .425 .250 .100 .267 ±.001 dia. Gold Gold ( C) 1320000G911-078
7 .100 .005/.008 .100 .267 ±.001 dia. Passivated Gold ( C) 1324000K911-003
(C) in contact plating column indicates captive contact (mechanical captivation).

SMA Receptacles
Edge Mount P.C. Board Receptacles - Straight Plugs
.050 (contact dia. .499 .050 (contact dia. .499
ush with insulator) .187 ush with insulator) .187
.065 .375 .065 .375
A A
.312 .312
.040 typ. .040 typ.
.040 typ. B .040 typ. B

.075
.030 dia.
Tab contact
Figure 1 .020 wide
Figure 2
(Post contact) x .010 thick (Tab contact)

Figure Delta P/N
Thickness A B Body Contact
1 .042 .048 .093 Gold Gold ( C) 1368000G91P-004
1 .047 .053 .088 Gold Gold ( C) 1368000G91P-005
1 .062 .068 .073 Gold Gold ( C) 1368000G91P-006
2 .042 .048 .103 Gold Gold ( C) 1368000G91P-001
2 .047 .053 .098 Gold Gold ( C) 1368000G91P-002
2 .062 .068 .083 Gold Gold ( C) 1368000G91P-003
Panel Plug Receptacles - Solder Pot Contact

.20
Figure 1 ( 3/ 8 " square flange) .20 Figure 2 ( 1/ 2 " square flange)
.065
.065 C
C dia. typ.
dia. typ.
B (CL ) typ. B (CL ) typ.

.032 .032
( I.D. ) ( I.D. )
A
square .050 dia. .507 A sq. .050 dia. .507
.20
.102 C
dia. typ.
.032
Figure 3 (2-hole flange) B (CL ) ( I.D. )
.050 dia.
.162 dia.
.065
.260
.507

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold ( C) 1359000G911-013
2 .500 .340 .102 05 Gold Gold ( C) 1359000G051-010
3 .625 .481 .000 92A Gold Gold ( C) 1359000G921-017
3 .625 .481 .000 92A Passivated Gold ( C) 1359000K921-017
3 .625 .481 .025 92A Passivated Gold ( C) 1359000G921-018

SMA Receptacles
Panel Plug Receptacles - Tab Contact
.100
.065
C
dia. Tab
typ. .004/.007
B (CL ) typ.
thick x
.050 wide
A sq. .507
Figure 1
( 3/ 8 " square flange)
.100
.065
C dia. typ.
Tab
B (CL ) typ. .004/.007
thick x
.050 wide
A sq. .507
Figure 2
C .100
dia. typ.
Tab
B (CL ) .004/.007
thick x
.050 wide
.065
.260 .507
Figure 3
(2-hole flange)

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1359000G910-002
1 .375 .250 .067 91 Gold Gold ( C) 1359000G911-014
2 .500 .340 .102 05 Gold Gold 1359000G050-005
2 .500 .340 .102 05 Gold Gold ( C) 1359000G051-045
3 .625 .481 .102 92A Gold Gold 1359000G920-001
3 .625 .481 .102 92A Passivated Gold 1359000K920-001
3 .625 .481 .102 92A Gold Gold ( C) 1359000G921-019

SMA Receptacles
Panel Plug Receptacles - Slotted Contact
.065
.050 dia.
C
B (CL ) typ. dia. Slot
typ. .012 wide
(+.003, -.001)
A sq. .050 .507
Figure 1
B
(CL ) typ. .050
Slot
.012 wide
(+.003, -.001)
.050 dia.
C .065
A dia. typ.
square .507
Figure 2
C .050
dia. typ.
B (CL ) Slot
.012 wide
(+.003, -.001)
.050 dia.
.065
.260 .507
Figure 3
(2-hole flange)
Other Standard Slot Widths

Our other standard slot widths for these connectors (.018" and .036")
are readily available—call for part numbers.

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1359000G910-004
1 .375 .250 .067 91 Gold Gold ( C) 1359000G911-023
2 .500 .340 .102 05 Gold Gold 1359000G050-007
2 .500 .340 .102 05 Gold Gold ( C) 1359000G051-038
3 .625 .481 .102 92A Gold Gold 1359000G920-002
3 .625 .481 .102 92A Gold Gold ( C) 1359000G921-020
See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.

SMA Receptacles
Panel Plug Receptacle - Post Contact
.49
.330
C
dia.
typ.
B (CL ) typ.
.050 dia.
.162 dia.
A sq.
.065
Figure 1 .507
B
(CL ) typ. .49
C .330
dia. typ.
.050 dia.
.162 dia.
A .065
square .507
Figure 2
.49
C .330
dia. typ.
B (CL )
.050 dia.
.162 dia.
.260 .065
.507
Figure 3
(2-hole flange)

Figure Delta P/N
1 .375 .250 .067 91 Gold Gold 1359000G910-003
1 .375 .250 .067 91 Gold Gold ( C) 1359000G911-015
2 .500 .340 .102 05 Gold Gold 1359000G050-000
2 .500 .340 .102 05 Gold Gold ( C) 1359000G051-004
3 .625 .481 .102 92A Gold Gold 1323000G920-000
3 .625 .481 .102 92A Gold Gold ( C) 1323000G921-001

SMA Receptacles
Dummy Receptacles
B
(CL ) typ. .102
C dia. typ.
dia. typ.
A B (CL )
.065 .065
A .375
square .223 .375
Figure 1 Figure 2
( 1/ 2 " square flange) (2-hole flange)

Figure Delta P/N
1 .500 .340 .102 05 Gold — 1363000G050-001
1 .500 .340 .102 05 Passivated — 1363000K050-002
2 .625 .481 .102 92 Gold — 1363000G920-000
2 .625 .481 .102 92 Passivated — 1363000K920-000
Dust Caps
A
C ( I.D. ) A
C ( I.D. )
B
B
Figure 1 Figure 2
(Shown with safety chain) (Shown with bead chain)
See page 195 for MIL-PRF-39012 QPL versions.
Dimensions Plating
A B C Body Contact
1 .500 2.25 .144 Bead chain Gold — 1332000G000-000
1 .500 2.25 .144 Bead chain Passivated — 1332000K000-000
1 .275 .— . — No chain Passivated — 1332000K00A-001
1 .500 3.25 .281 Safety chain Passivated — 1332000K00B-003
1 .330 .— . — No chain / shorting type Passivated Passivated 1332000K00C-000
2 .500 2.25 .144 Bead chain Gold — 1333000G000-000
2 .500 2.25 .144 Bead chain Passivated — 1333000K000-000
2 .390 .— . — No chain Passivated — 1333000K00A-000
• See page 208 for mounting dimensions . • Dust caps are available with other chain styles and lengths.

SMA Adapters
Bulkhead Mounted Jack-Jack Adapters (Connects Two Plugs)
B .375 hex
B .500 dia. A
A
Figure 1 Figure 2
(Hermetically sealed, with mounting gasket) (Non-hermetic, no mounting gasket)

Figure Delta P/N
1 .875 .555 .190 66 Gold Gold ( C) 1326000G678-000
2 .875 .575 .250 67 Gold Gold ( C) 1326000G821-000
Straight Adapters
B
B
Figure 1 Figure 2
A
A
Figure 3
connects one plug
and one jack)
A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 .500 .218 Gold Gold ( C) 1328000G000-000
1 .500 .218 Passivated Gold ( C) 1328000K000-001
2 .875 .218 Gold Gold ( C) 1327000G000-000
3 .720 . — Gold Gold ( C) 1334000G000-000
3 .720 . — Passivated Gold ( C) 1334000K000-000

SMA Adapters
A
A
B
B
Figure 1 Figure 2
(Right angle plug–jack; (Right angle plug–plug;
connects one plug and one jack) connects two jacks)
Figure 3
(Right angle jack–jack;
connects two plugs)
B B
A A
Figure 4 Figure 5
(Tee jack–plug–jack; (Tee jack–jack–jack;
connects two plugs and one jack) connects three plugs)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 .625 .585 Gold Gold ( C) 1329000G000-000
2 .675 .675 Gold Gold ( C) 1337000G000-001
3 .585 .585 Gold Gold ( C) 1395000G000-000
4 .920 .630 Gold Gold ( C) 1330000G000-000
5 1.00 .590 Gold Gold ( C) 1349000G000-000
5 1.00 .590 Passivated Gold ( C) 1349000K000-000
(C) in contact plating column indicates captive contact.

E-Line Brass SMA Connectors
General Description
Delta E-Line brass SMA connectors are subminiature, 50 Ω impedance connectors with 1 ⁄4 "-36 threaded coupling.
Their use of brass for body parts provides lower cost while retaining electrical performance similar to that of stainless
steel SMA counterparts.
If your application does not require the 500 mating cycles of service life provided by stainless steel SMA connectors,
E-Line SMAs can fulfill your needs at a reduced cost. For additional economy, nickel-plated bodies can be specified
instead of gold plating.
E-Line brass SMA connectors can be used with semi-rigid cables in applications up to 18 GHz, or miniature flexible
cables up to 12.4 GHz.
Our E-Line brass SMA product line is still growing, so please call if you don’t see what you need.
E-Line Brass SMA Configurations
Cable Plugs for Semi-Rigid Cable ................................124 Panel Jack Receptacles (Post Contact)..........................126
Straight Cable Jacks for Semi-Rigid Cable ................124 Panel Jack Receptacles (Tab Contact)............................126
Bulkhead Cable Jacks for Semi-Rigid Cable .............124 Bulkhead Jack Receptacles ...............................................127
Panel Cable Jacks for Semi-Rigid Cable .....................124 Printed-Circuit Board Receptacles .................................127
Cable Plugs for Flexible Cable ......................................125 Panel Plug Receptacles (Solder Pot Contact) ............128
Straight Cable Jacks for Flexible Cable ......................125 Panel Plug Receptacles (Post Contact) .........................128
Bulkhead Cable Jacks for Flexible Cable ...................125 Panel Plug Receptacles (Tab Contact) ...........................128
Panel Jack Receptacles (Solder Pot Contact) ..........126 In-Series Adapters.................................................................129
E-Line Brass SMA Specifications*

Plug Interface** .135 max. Nominal Impedance: 50 ohms.
.015/.045 Frequency Range: DC–18 GHz (with semi-rigid cable);
.1808 max. DC–12.4 GHz (with flexible cable).
Voltage Rating: 335–500 volts RMS (dependent on cable).
.0355/.0370
.250-36 UNS-2B, Dielectric Withstanding
.130 min.
full thread Voltage : 500–1500 volts RMS (dependent on cable).
Materials/Finishes:
Contact shoulder projection
.000 max; recession .010 max. Insulator projection .000 max. Male Contacts: Brass per ASTM B16, or
.100 max. Beryllium Copper per ASTM B196.
Jack Interface** .250-36 UNS-2A,
.074/.078 .170 min. full thread Gaskets: Silicone rubber per ZZ-R-765,
.218 min. Class II, Grade 50.
.015/.045
Other Metal Parts: Brass per ASTM B16 or equivalent; gold plated per
.049 MIL-DTL-45204, or nickel plated per AMS-QQ-N-290.
.051
.208 .1810 All other specifications are in accordance with the latest issues
.216 min.
of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL
specifications, and interfaces are in accordance with MIL-STD-348.
Insulator projection .000 max. Contact projection .000 max; *These specifications are typical and may not apply to all
recession .010 max. connectors. Detailed specifications for individual connectors
Reference Plane

E-Line Brass SMA Cable Plugs
Straight & Right Angle Plugs - For Semi-Rigid Cable
B
B B
A
A A

(Straight plug—direct solder) (Straight plug—direct solder) (Right angle plug—direct solder)

Figure Delta P/N
13 1 .330 .344 Gold* None ( 1) 1301031G003-502 G/01
13 2 .459 .330 Gold* None ( 1) 1301031G003-501 G/01
13 2 .330 .459 Gold* Gold 1301031G003-500 H/03
13 3 .460 .630 Gold* Gold ( C ) 1305031G003-500 J/02
14 2 .330 .459 Gold* Gold 1301025G003-500 H/03
14 3 .460 .630 Gold* Gold ( C ) 1305025G003-500 J/02
( 1) Cable center conductor used as contact.
Straight, Panel & Bulkhead Jacks - For Semi-Rigid Cable
.25 .125 max. panel

.312 hex
B dia.
A B C
A hex
Figure 1 Figure 2
(Straight jack, direct solder) (Bulkhead mount, direct solder)
C dia. typ. C .513

.513 dia. typ.
.065 .065
A B (CL ) A B (CL )
square
.375
.260 .375
Figure 3 Figure 4
(4-hole flange, direct solder) (2-hole flange, direct solder)

13 1 .500 .335 .— — Gold* Gold 1308031G003-500 H/01
13 2 .850 .500 .312 67 Gold* Gold 1317031G673-500 H/04
13 3 .500 .340 .102 05 Gold* Gold 1311031G053-500 H/01
13 4 .625 .481 .102 92A Gold* Gold 1311031G923-500 H/01
14 1 .500 .335 .— — Gold* Gold 1308025G003-500 H/01
14 2 .850 .500 .312 67 Gold* Gold 1317025G673-500 H/04
14 3 .500 .340 .102 05 Gold* Gold 1311025G053-500 H/01
14 4 .625 .481 .102 92A Gold* Gold 1311025G923-500 H/01
• * Also available with nickel-plated body—change G in Delta part number to N . • (C) in contact plating column indicates captive contact.

E-Line Brass SMA Cable Plugs / Jacks
Straight & Right Angle Plugs - Crimp Type For Flexible Cable
B B
A A
A A
B B
Figure 1 Figure 2 Figure 3 Figure 4
(Straight plug) (Straight plug) (Right angle plug) (Right angle plug)

Figure Delta P/N
5 1 .880 .330 Gold* Gold 1303017G000-500 K/05
5 3 .650 .630 Gold* Gold ( C) 1307017G001-500 L/03
6 1 .880 .330 Gold* Gold 1303013G000-500 K/05
6 3 .650 .630 Gold* Gold ( C) 1307013G001-500 L/03
9 1 .750 .330 Gold* Gold 1303037G000-500 K/03
9 3 .650 .630 Gold* Gold ( C) 1307037G001-500 L/03
10 1 .750 .330 Gold* Gold 1303100G000-500 K/06
10 3 .650 .630 Gold* Gold ( C) 1307100G001-500 L/03
11 2 .760 .330 Gold* Gold 1303038G000-500 ***
11 4 .650 .630 Gold* Gold ( C) 1307038G001-500 L/03
Straight & Bulkhead Jacks - Crimp Type For Flexible Cable

A .250 A .250
B dia. B dia.
Figure 1 (Straight jack) Figure 2 (Straight jack)

A .312 hex A .312 hex
.125 max. panel C .125 max. panel C

B hex B hex
Figure 3 (Bulkhead jack) Figure 4 (Bulkhead jack)

5 1 .760 .335 . — — Gold* Gold 1310017G000-500 K/08
5 3 .990 .500 .312 67 Gold* Gold 1319017G670-500 K/10
6 1 .760 .335 . — — Gold* Gold 1310013G000-500 K/08
6 3 .990 .500 .312 67 Gold* Gold 1319013G670-500 K/10
9 1 .740 .335 . — — Gold* Gold 1310037G000-500 K/08
9 3 .990 .500 .312 67 Gold* Gold 1319037G670-500 K/10
10 1 .740 .335 . — — Gold* Gold 1310100G000-500 K/08
10 3 .990 .500 .312 67 Gold* Gold 1319100G670-500 K/10
11 2 .740 .335 . — — Gold* Gold 1310038G000-500 ***
11 4 .990 .500 .312 67 Gold* Gold 1319038G670-500 ***
• * Also available with nickel-plated body—change G in Delta part number to N . • (C) in contact plating column indicates captive contact.

E-Line Brass SMA Receptacles
.197 .197
.102
C .065 dia. typ. .065
dia.
typ. .037 I.D.
B (CL ) typ. A B (CL )
.037 I.D. .050 dia.
.050 dia.
A sq. .375
.223 .375
Figure 1 Figure 2
(Solder pot contact—square flange) (Solder pot contact—2-hole flange)
.232
.232 .157
.157
C .065 .065
dia.
typ. .102
dia. typ.
.050 dia. .050 dia.
.162 dia. .162 dia.
A sq. .375
.223 .375
Figure 3 Figure 4
(Post contact—square flange) (Post contact—2-hole flange)
.098
.098 .102
C .065
dia. typ. .065
dia.
typ. Tab
B (CL ) typ. A B (CL ) .005
thick x
Tab
.005 .050 wide
thick x
A sq. .050 wide .375
.223 .375
Figure 5 Figure 6
(Tab contact—square flange) (Tab contact—2-hole flange)

Figure Delta P/N
1 .500 .340 .102 05 Gold* Gold ( C) 1313000G051-500
2 .625 .481 .102 92 Gold* Gold ( C) 1313000G921-500
3 .500 .340 .102 05 Gold* Gold ( C) 1358000G051-500
4 .625 .481 .102 92 Gold* Gold ( C) 1358000G921-500
5 .500 .340 .102 05 Gold* Gold ( C) 1358000G051-501
6 .625 .481 .102 92 Gold* Gold ( C) 1358000G921-501
• * Also available with nickel-plated body—change G in Delta part number to N .

• See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact (mechanical captivation).

A B
.066 .375 hex
.162 dia. C
.037 (I.D.) .050
dia.
.050 dia.
.162 dia. .250 .500
B C dia.
hex A
Figure 1 (Rear mount, solder pot contact, no mounting gasket) Figure 2 (Round body, post contact)

Figure Delta P/N
1 .670 .450 .375 .125 67 Gold Gold ( C ) 1321000G671-500
2 .660 .157 .075 .125 82 Gold Gold ( C ) 1321000G821-500
2 .620 .118 .000 .125 82 Gold Gold ( C ) 1321000G821-501
Printed-Circuit Board Receptacles

.276
.200 sq. .020
(CL ) typ. .050
dia.
.276 A
.200 sq. C .39
.040 .058 C B (CL ) typ. .050
sq. typ. sq. typ. A .040 dia.
sq. typ.
Figure 1 (Straight jack) B
.058
A sq. typ. .020
.200 .276
C .41
(CL ) typ. .050
.040 dia. .100
sq. typ. max. Figure 2 (Right angle jack)
panel
.058 typ.
B
.630 .020
.276 A
.200 sq. C .39
(CL ) typ. .050
Figure 3 (Right angle bulkhead jack) .040 dia.
sq. typ.
.200 .276 sq. .020 .058 B

(CL ) typ. .050 sq. typ. .020
dia.
.040 .058 C .330 Figure 5 (Right angle plug)

sq. typ. sq. typ. B
A
Figure 4 (Straight plug)

Figure Delta P/N
1 .550 .394 .155 .125 PCB05 Gold* Gold ( C) 1367000G001-500
2 .540 .594 .155 .125 PCB05 Gold* Gold ( C) 1369000G001-500
3 .560 .756 .155 .125 PCB05/82 Gold* Gold ( C) 1369000G821-500
4 .650 .494 .155 .125 PCB05 Gold* Gold ( C) 1368000G001-500
5 .540 .650 .155 .125 PCB05 Gold* Gold ( C) 1370000G001-500


.197 .197
C .102 .065
.065 dia. typ.
dia.
typ. .037 I.D.
.037 I.D.
.050 dia.
.050 dia. .330 .330
A sq.
.507 .223 .507
Figure 1 Figure 2
(Solder pot contact—square flange) (Solder pot contact—2-hole flange)
.232 .232
.157 .157
.065 .065
C
dia. .102
typ. dia. typ.
.050 dia. .050 dia.
.162 dia. .330 .162 dia. .330
A sq.
.507 .223 .507
Figure 3 Figure 4
(Post contact—square flange) (Post contact—2-hole flange)
.098 .098
C .065 .065
dia.
typ. .102
dia. typ.
Tab Tab
.005 .005
thick x .330 thick x .330
A sq. .050 wide .050 wide
.507 .223 .507
Figure 5 Figure 6
(Tab contact—square flange) (Tab contact—2-hole flange)

Figure Delta P/N
1 .500 .340 .102 05 Gold* Gold ( C) 1323000G051-500
2 .625 .481 .102 92 Gold* Gold ( C) 1323000G921-500
3 .500 .340 .102 05 Gold* Gold ( C) 1359000G051-500
4 .625 .481 .102 92 Gold* Gold ( C) 1359000G921-500
5 .500 .340 .102 05 Gold* Gold ( C) 1359000G051-501
6 .625 .481 .102 92 Gold* Gold ( C) 1359000G921-501


E-Line Brass SMA Adapters
Straight, Right Angle, & Tee Adapters
B dia.
A .330
typ.
Figure 1 Figure 2
(Straight jack–jack; connects two plugs) (Straight plug–plug; connects two jacks)
A
.25 A
B dia. B
.330
Figure 3 Figure 4
(Straight jack–plug; connects one plug and one jack) (Right angle plug–jack; connects one plug and one jack)
B B
A A
Figure 5 Figure 6
(Tee jack–plug–jack; connects two plugs and one jack) (Tee jack–jack–jack; connects three plugs)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 .500 .250 Gold* Gold ( C) 1328000G001-500
2 .900 .— Gold* Gold ( C) 1327000G001-500
3 .860 .335 Gold* Gold ( C) 1334000G001-500
4 .654 .594 Gold* Gold ( C) 1329000G001-500
5 .913 .654 Gold* Gold ( C) 1330000G001-500
6 .913 .594 Gold* Gold ( C) 1338000G001-500
• (C) in contact plating column indicates captive contact (mechanical captivation).

SMB & SMC Connectors
General Description
Delta SMB connectors are subminiature, 50 Ω impedance connectors with snap-on coupling. They are best suited for
use with cables in the range of .070" to .120" diameter, such as RG-178 and RG-316/U.
Delta SMC connectors (page 134) are similar in size and construction to SMB series, but employ #10–32 threaded
coupling, and have a higher upper frequency limit than SMB.
All Delta SMB and SMC connectors are available with gold-plated bodies, or with nickel-plated bodies for economy.
Adapters between SMB and other series are shown starting on page 176.
As with our other connector series, Delta’s customer-driven design results in SMB and SMC series connectors with practical
and unique features that make your design and assembly process easier. Some of these include:
• SMB PressMount receptacles (page 133) mount securely in a single round hole, saving space on your components and
• SMB and SMC panel receptacles with flange sizes to match the same hole pattern as standard SMA connectors, letting
you drill one hole pattern and mount SMB, SMC, BNC, N, SMA, or TNC series connectors as needed.
Our SMB and SMC series product line is still growing, so please call if you don’t see what you need.
SMB Configurations SMC Configurations

Straight Cable Plugs ............................................131 Straight Cable Plugs ..............................................134
Right Angle Cable Plugs.....................................131 Right Angle Cable Plugs........................................134
Bulkhead Cable Jacks ..........................................131 Bulkhead Cable Jacks ............................................134
Bulkhead Jack Receptacles................................132 Bulkhead Jack Receptacles..................................135
Panel Jack Receptacles (square flange) ........132 Panel Jack Receptacles (square flange) ..........135
PressMount receptacles .....................................133 Printed-Circuit Board Receptacles ....................135
Printed-Circuit Board Receptacles ..................133
SMB & SMC Specifications*

SMB Interfaces** Electrical:
Nominal Impedance: 50 ohms.
Reference Plane
Plug Jack Frequency Range: SMB: DC–4 GHz.
Reference SMC: DC–10 GHz.
Plane
.141
.064 .117 max. Voltage Rating: 250 volts RMS (when used with RG-178-
min.
max. .052 min. class cables); 335 volts RMS (when used
.146 max.
with RG-316-class cables).
.019/.021 Dielectric Withstanding
Voltage : 750 volts RMS (when used with RG-178-class
cables); 1,000 volts RMS (when used with
RG-316-class cables).
.082 min.
.081 Insulation Resistance: 1,000 megohms.
max. .000 min.
.007/.037 .007 max. .065
.131/.141 min.
Materials/Finishes:
.007min. Insulators: Teflon per ASTM D1710.
SMC Interfaces** Female Contacts: Beryllium Copper per ASTM B196.
Reference Plane
Plug Jack Reference Plane Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
.233 max.
.123/.133 Other Metal Parts: Brass per ASTM B16, plated:
.234 min.
.147 min. .146 max.
Gold per MIL-DTL-45208, or
Nickel per AMS-QQ-N-290.
.019/.021
.081 max. All other specifications are in accordance with the
latest issues of MIL-PRF-39012, or MIL-A-55339, or
.082 min. other applicable MIL specifications, and interfaces
.000 min. are in accordance with MIL-STD-348.
.190-32 UNEF-2B; .190-32 UNEF-2A;
.110 min. .024 min. min. 2 complete *These specifications are typical and may not
.134 thread length .084 max. threads
apply to all connectors. Detailed specifications for
.122 max. max. .134 min.
individual connectors are available on request.

SMB Cable Connectors
Straight & Right Angle Plugs - For Flexible Cable
B A
B (crimp sleeve) (crimp sleeve)
.250 hex
Figure 3
(Crimp type)
B
A A .38
(crimp sleeve)
Figure 1 Figure 2
(Crimp type) (Crimp type)

Figure Delta P/N
9 1 .800 .380 Gold Gold 2403037G000-002 B/28
9 1 .800 .380 Nickel Gold 2403037N000-002 B/28
9 2 1.03 .380 Gold Gold ( C ) 2402037G001-000 ***
9 2 1.03 .380 Nickel Gold ( C ) 2402037N001-000 ***
9 3 .520 .630 Gold Gold ( C ) 2407037G001-000 B/29
9 3 .520 .630 Nickel Gold ( C ) 2407037N001-000 B/29
10 1 .800 .380 Gold Gold 2403100G000-000 B/28
10 1 .800 .380 Nickel Gold 2403100N000-000 B/28
10 2 1.03 .380 Gold Gold ( C ) 2402100G001-000 ***
10 2 1.03 .380 Nickel Gold ( C ) 2402100N001-000 ***
10 3 .520 .630 Gold Gold ( C ) 2407100G001-000 B/29
10 3 .520 .630 Nickel Gold ( C ) 2407100N001-000 B/29
11 1 .800 .380 Gold Gold 2403038G000-001 ***
11 1 .800 .380 Nickel Gold 2403038N000-001 ***
11 2 1.03 .380 Gold Gold ( C ) 2402038G001-000 ***
11 2 1.03 .380 Nickel Gold ( C ) 2402038N001-000 ***
11 3 .520 .630 Gold Gold ( C ) 2407038G001-001 B/29
11 3 .520 .630 Nickel Gold ( C ) 2407038N001-001 B/29
C .250 hex
(crimp sleeve) .093 max. panel
Figure 1
(Crimp type)
B
A

9 1 1.17 .426 .380 68 Gold Gold ( C) 2419037G681-000 ***
9 1 1.17 .426 .380 68 Nickel Gold ( C) 2419037N681-000 ***
10 1 1.17 .426 .380 68 Gold Gold ( C) 2419100G681-000 ***
10 1 1.17 .426 .380 68 Nickel Gold ( C) 2419100N681-000 ***
11 1 1.17 .426 .380 68 Gold Gold ( C) 2419038G681-000 ***
11 1 1.17 .426 .380 68 Nickel Gold ( C) 2419038N681-000 ***

SMB Receptacles
.093 max. panel

C ( I.D. )
.250 hex B
A
Figure 1
B
.312 hex .38
C ( I.D. ) A
.093
max. panel
Figure 2

Figure Delta P/N
1 .590 .265 .035 68 Gold Gold ( C) 2420000G681-000
1 .590 .265 .035 68 Nickel Gold ( C) 2420000N681-000
2 .590 .750 .022 68 Gold Gold ( C) 2422000G681-000
2 .590 .750 .022 68 Nickel Gold ( C) 2422000N681-000
.58 .58
C C
dia. typ. dia. typ.

.025 .025
( I.D. ) .065 ( I.D. ) .065
A
square .375 A .375
square
Figure 1 Figure 2
( 3/ 8 " square flange) ( 1/ 2 " square flange)

Figure Delta P/N
1 .375 .232 .093 91A Gold Gold ( C) 2413000G911-000
1 .375 .232 .093 91A Nickel Gold ( C) 2413000N911-000
2 .500 .340 .102 05 Gold Gold ( C) 2413000G051-000
2 .500 .340 .102 05 Nickel Gold ( C) 2413000N051-000

SMB Receptacles
.040 B
.312 hex C sq. typ.
C
.038 .038
dia.
.312 dia.
Figure 1 Figure 2 hex
A
.040 sq. typ. .200 typ. B .200 typ.
A

Figure Delta P/N
1 .300 .060 .155 .100 PCB06 Gold Gold ( C) 2468000G001-000
1 .300 .060 .155 .100 PCB06 Nickel Gold ( C) 2468000N001-000
2 .590 .375 .155 .100 PCB06 Gold Gold ( C) 2470000G00E-000
2 .590 .375 .155 .100 PCB06 Nickel Gold ( C) 2470000N00E-000

Component housing These connectors eliminate the need for complicated Component housing
mounting hole patterns and mounting hardware.
They are simply pressed into a single through hole,
and the precisely-engineered knurled mounting section
provides retention strength far greater than normal
mating and unmating forces. An integral shoulder
Internal provides a positive stop when mounting. Internal
Circuitry Circuitry
PressMounts are available for a wide variety of Delta
connector series, and can be used in packages as small
Front mount as the outer diameter of the connector body. Rear mount
.300 dia. A .275 dia.

A .195 dia.
.060
.062
B dia. B dia.
.115 dia. .070
.270 .115 .030 .186
dia. over knurl .265 .240 dia. over knurl
.100
Figure 1 Figure 2
(Post contact, front mount, (Post contact, rear mount,
stainless steel body) brass body)

Figure Delta P/N
1 .062 .050 .100 .267 ±.001 dia. Passivated Gold ( C ) 2420000K911-001
2 .500 .060 .062 .182 ±.001 dia. Gold Gold ( C ) 2421000G911-000

SMC Cable Connectors
A
B .250 hex
B .250 hex (crimp sleeve) .234 hex
(crimp sleeve)
B
.38 .234 hex
A A (crimp sleeve)
Figure 1 Figure 2
(Crimp type) (Crimp type) Figure 3
(Crimp type)

Figure Delta P/N
9 1 .800 .380 Gold Gold 2503037G000-000 B/28
9 1 .800 .380 Nickel Gold 2503037N000-000 B/28
9 2 1.03 .380 Gold Gold ( C ) 2502045G001-001 ***
9 2 1.03 .380 Nickel Gold ( C ) 2502045N001-001 ***
9 3 .560 .630 Gold Gold ( C ) 2507037G001-000 B/29
9 3 .560 .630 Nickel Gold ( C ) 2507037N001-000 B/29
10 1 .800 .380 Gold Gold 2503100G000-000 B/28
10 1 .800 .380 Nickel Gold 2503100N000-000 B/28
10 2 1.03 .380 Gold Gold ( C ) 2502100G000-001 ***
10 2 1.03 .380 Nickel Gold ( C ) 2502100N000-001 ***
10 3 .560 .630 Gold Gold ( C ) 2507100G001-000 B/29
10 3 .560 .630 Nickel Gold ( C ) 2507100N001-000 B/29
11 1 .800 .380 Gold Gold 2503038G000-000 B/28
11 1 .800 .380 Nickel Gold 2503038N000-000 B/28
11 2 1.03 .380 Gold Gold ( C ) 2502038G001-001 ***
11 2 1.03 .380 Nickel Gold ( C ) 2502038N001-001 ***
11 3 .560 .630 Gold Gold ( C ) 2507038G001-000 B/29
11 3 .560 .630 Nickel Gold ( C ) 2507038N001-000 B/29
C .250 hex
(crimp sleeve) .093 max. panel
Figure 1
(Crimp type)
B
A

9 1 1.17 .426 .380 68 Gold Gold ( C) 2519037G681-000 ***
9 1 1.17 .426 .380 68 Nickel Gold ( C) 2519037N681-000 ***
10 1 1.17 .426 .380 68 Gold Gold ( C) 2519100G681-000 ***
10 1 1.17 .426 .380 68 Nickel Gold ( C) 2519100N681-000 ***
11 1 1.17 .426 .380 68 Gold Gold ( C) 2519038G681-000 ***
11 1 1.17 .426 .380 68 Nickel Gold ( C) 2519038N681-000 ***

SMC Receptacles
B
.312 hex .38
.093 max. panel
C ( I.D. )
Figure 2
C ( I.D. ) A
.250 hex B
A .093
Figure 1 max. panel

Figure Delta P/N
1 .590 .265 .035 68 Gold Gold ( C) 2520000G681-000
1 .590 .265 .035 68 Nickel Gold ( C) 2520000N681-000
2 .590 .750 .022 68 Gold Gold ( C) 2522000G681-000
2 .590 .750 .022 68 Nickel Gold ( C) 2522000N681-000

.58 .58
C C
dia. typ.
dia. typ.

.025 .025
( I.D. ) .065 ( I.D. ) .065
A
square .375 A .375
square
Figure 1 Figure 2
( 3/ 8 " square flange) ( 1/ 2 " square flange)

Figure Delta P/N
1 .375 .232 .093 91A Gold Gold ( C) 2513000G911-000
1 .375 .232 .093 91A Nickel Gold ( C) 2513000N911-000
2 .500 .340 .102 05 Gold Gold ( C) 2513000G051-000
2 .500 .340 .102 05 Nickel Gold ( C) 2513000N051-000

.040 B
.312 hex C sq. typ.
C
.038 .038
dia.
.312 dia.
hex
A
.040 sq. typ. .200 typ. B .200 typ.
Figure 1 A Figure 2

Figure Delta P/N
1 .300 .060 .155 .100 PCB06 Gold Gold ( C) 2568000G001-000
1 .300 .060 .155 .100 PCB06 Nickel Gold ( C) 2568000N001-000
2 .590 .375 .155 .100 PCB06 Gold Gold ( C) 2570000G00E-000
2 .590 .375 .155 .100 PCB06 Nickel Gold ( C) 2570000N00E-000
See page 208 for mounting dimensions. • (C) in contact plating column indicates captive contact.

TNC Connectors
General Description
Delta TNC connectors are compact, 50 Ω impedance connectors with 7 ⁄16 -28 threaded coupling, similar in size to BNC
connectors but with better electrical characteristics. They are best suited for use with cables in the range of .150" to .250"
diameter, but are available for other cables from .090" to over .75" diameter. Many of our TNC connectors are available
as MIL-PRF-39012 QPL versions. These types are listed starting on page 198.Our extensive line of TNC receptacles
includes configurations for virtually any packaging requirement, and we can supply any adapter or accessory you need
to complete your system design. Adapters between TNC and other series are shown starting on page 176.
As with our other connector series, Delta’s customer-driven design results in TNC series connectors with practical and
• Panel receptacles with flange sizes to match the same hole pattern as standard SMA or type N connectors, letting you
• TNC connectors with polarized interfaces (page 152) prevent mismating and meet FCC Part 15.203 requirements.
• Keying baskets and keyed plugs (page 149) provide numerous polarizations in applications incorporating
multiple connector pairs.
Our TNC series product line is still growing, so please call if you don’t see what you need.
TNC Configurations
Straight Cable Plugs ...................................................137 Bulkhead Jack Receptacles ....................................146
Right Angle Cable Plugs ...........................................139 PressMount Receptacles..........................................147
Straight Cable Jacks ....................................................141 Stripline Receptacles .................................................147
Bulkhead Cable Jacks .................................................142 Resistive Terminations ..............................................148
Panel Cable Jacks .........................................................143 Dust Caps .......................................................................148
Panel Jack Receptacles (square flange) ...............144 Keying Baskets .............................................................149
Right Angle Panel Jack Receptacles .....................145 In-Series Adapters ......................................................150
Panel Plug Receptacles..............................................145 Polarized Plugs and Jacks .......................................152
TNC Specifications*
.208/.228
.4375-28 UNEF-2B;
Plug Interface** Frequency Range: DC–11 GHz.
.006 min. Voltage Rating: 500 volts RMS.
Dielectric Withstanding Voltage : 1,500 VRMS.
.190 *See .440 Materials/Finishes:
min. below min.
.087 Female Contacts: Beryllium Copper per
.322
max. .003 ASTM B196.
min. meet gage requirements
.210/.230 of MIL-PRF-39012/26. Contact Plating : Silver per ASTM B700, or
Jack Interface** .414 min. Reference
Plane Class II, Grade 50.
.188/.208 .186 Other Metal Parts: Brass per ASTM B16, plated:
.068/.088 .206 Silver per ASTM B700, or
Nickel per AMS-QQ-N-290.
.378 .346 .327 .319 .256 .186 max. All other specifications are in accordance with the
.381 .356 .333 .321 max. latest issues of MIL-PRF-39012, or MIL-A-55339, or
other applicable MIL specifications, and interfaces
.015 are in accordance with MIL-STD-348.
.030 .081
.4375-28 UNEF-2A;
.006 max. all connectors. Detailed specifications for individual
.327
.335 connectors are available on request.

TNC Cable Plugs
B dia. B dia.
A A
Figure 1 Figure 2
(Standard coupling nut) (Safety-wire holes in coupling nut)
B dia. B dia.
A A
Figure 3 Figure 4

Figure Delta P/N
1 1 1.66 .750 Nickel Gold 1201001N000-000 A/01
2, 3 1 1.66 .750 Nickel Gold 1201004N000-000 A/01
2, 3 1 1.66 .750 Nickel Gold ( C) 1201004N001-004 A/01
2, 3 2 1.66 .750 Nickel Gold 1240004N000-000 A/01
2, 3 2 1.66 .750 Nickel Gold ( C) 1240004N001-000 A/01
5, 6 3 1.09 .500 Nickel Gold 1201015N000-000 A/17
5, 6 3 1.09 .500 Nickel Gold ( C) 1201015N001-000 A/17
5, 6 4 1.09 .500 Nickel Gold 1240015N000-000 A/17
5, 6 4 1.09 .500 Nickel Gold ( C) 1240015N001-000 A/17
7 3 1.09 .500 Nickel Gold 1201021N000-000 A/17
7 3 1.09 .500 Nickel Gold ( C) 1201021N001-000 A/17
7 4 1.09 .500 Nickel Gold 1240021N000-000 A/17
7 4 1.09 .500 Nickel Gold ( C) 1240021N001-000 A/17
8A 3 1.09 .500 Nickel Gold 1201029N000-000 A/17
8A 3 1.09 .500 Nickel Gold ( C) 1201029N001-000 A/17
8B 3 1.09 .500 Nickel Gold 1201043N000-000 A/17
8B 3 1.09 .500 Nickel Gold ( C) 1201043N001-000 A/17
9 3 1.09 .500 Nickel Gold 1201036N000-000 A/18
9 3 1.09 .500 Nickel Gold ( C) 1201036N001-002 A/18
9 4 1.09 .500 Nickel Gold 1240036N000-000 A/18
9 4 1.09 .500 Nickel Gold ( C) 1240036N001-000 A/18
11 3 1.09 .500 Nickel Gold 1201038N000-000 A/18
11 3 1.09 .500 Nickel Gold ( C) 1201038N001-000 A/18

TNC Cable Plugs

B dia.
A
Figure 1

Figure Delta P/N
§ 5, 6 § 1 1.09 .500 Nickel Silver ( C) 1201018N005-000 E/03
§Except RG-223/U.
B (crimp sleeve) B (crimp sleeve)
Figure 1 Figure 2
A A

Figure Delta P/N
3A, 4 1 1.75 .630 Nickel Gold 1203005N000-000 B/11
5 2 1.06 .500 Nickel Gold 1203017N000-000 B/23
6 2 1.06 .500 Nickel Gold 1203013N000-000 B/23
7 2 1.06 .500 Nickel Gold 1203020N000-000 B/23
7 2 1.04 .500 Nickel Silver 1203020N000-003 * ***
7 2 1.04 .500 Nickel Gold 1203020N000-005 * ***
7 2 1.06 .500 Nickel Gold ( C ) 1203020N001-003 * ***
* Crimp center contact.
• ***Contact factory for cable assembly instructions.

TNC Cable Plugs
Straight Plug - Solder Clamp For Semi-Rigid Cable
B dia. B dia.
See page 198 for

MIL-PRF-39012
QPL version.
A A
Figure 1 Figure 2

Figure Delta P/N
13 1 1.09 .500 Nickel* Gold 1201031N003-000 F/08
13 2 1.09 .500 Nickel* Gold 1240031N003-000 F/08
14 1 1.09 .500 Nickel* Gold 1201025N003-000 F/07
14 2 1.09 .500 Nickel* Gold 1240025N003-000 F/07

A
B A
B
C dia. B
C dia. C dia.

Figure Delta P/N
1 1 1.19 1.94 .750 Nickel Gold 1204001N000-000 A/07
2, 3 1 1.19 1.94 .750 Nickel Gold 1204004N000-000 A/07
2, 3 1 1.19 1.94 .750 Nickel Gold ( C ) 1204004N001-000 A/07
5, 6 2 1.06 1.65 .500 Nickel Gold 1204015N000-000 A/17
5, 6 2 1.06 1.65 .500 Nickel Gold ( C ) 1204015N001-000 A/17
5, 6 3 1.20 1.11 .500 Nickel Gold ( C ) 1205018N000-000 A/19
7 2 1.06 1.65 .500 Nickel Gold 1204021N000-000 A/17
7 2 1.06 1.65 .500 Nickel Gold ( C ) 1204021N001-000 A/17
7 3 1.20 1.11 .500 Nickel Gold ( C ) 1205021N000-000 A/19
8A 3 1.20 1.11 .500 Nickel Gold ( C ) 1205029N000-000 A/19
9 2 1.06 1.65 .500 Nickel Gold 1204036N000-000 A/18
9 3 1.20 1.11 .500 Nickel Gold ( C ) 1205036N000-001 A/19

TNC Cable Plugs
Right Angle Plug - Heli-Grip® For Flexible Cable
B
Figure 1
A
C dia. These connectors have captivated contacts and allow rapid, easy assembly—simply
trim the cable, slide into the cone/insulator/contact assembly (left), solder the cen-
ter conductor to the contact, and screw body assembly (right) onto cable assembly.

Figure Delta P/N
§5, 6 § 1 1.06 1.65 .500 Nickel Silver ( C) 1204018N005-000 E/03
RG-223 1 1.06 1.65 .500 Nickel Silver ( C) 1204015N005-000 E/03
8A 1 1.06 1.65 .500 Nickel Silver ( C) 1204029N005-000 E/03
8B 1 1.06 1.65 .500 Nickel Silver ( C) 1204043N005-000 E/03
§Except RG-223/U.
Right Angle Plug - Crimp Type For Flexible Cable

B
Figure 1
C A
(crimp sleeve)

Figure Delta P/N
5 1 1.03 1.72 .500 Nickel Gold 1207017N000-000 B/02
6 1 1.03 1.72 .500 Nickel Gold 1207015N000-000 B/02
7 1 1.03 1.72 .500 Nickel Gold 1207020N000-000 B/02
Right Angle Plug - Solder-Clamp For Semi-Rigid Cable

B
Figure 1
A
C dia.

Figure Delta P/N
13 1 1.06 1.65 .500 Nickel* Gold 1204031N003-000 F/08
14 1 1.06 1.65 .500 Nickel* Gold 1204025N003-000 F/07
* Solder Furrule Is Gold Plated

TNC Cable Jacks
Straight Jacks - For Flexible & Semi-Rigid Cable
B dia.
B dia.
B
(crimp sleeve)
A A
A

(where noted) These connectors have captivated contacts and allow
Military Clamp for Flexible Cable

Figure Delta P/N
1 1 1.75 .750 Nickel Gold 1208001N000-000 A/20
2, 3 1 1.75 .750 Nickel Gold 1208004N000-000 A/20
5, 6 2 1.16 .500 Nickel Gold 1208015N000-000 A/17
5, 6 2 1.16 .500 Nickel Gold ( C ) 1208015N001-000 A/17
7 2 1.16 .500 Nickel Gold 1208021N000-000 A/17
7 2 1.16 .500 Nickel Gold ( C ) 1208021N001-000 A/17
9 2 1.16 .500 Nickel Gold 1208036N000-000 A/18
9 2 1.16 .500 Nickel Gold ( C ) 1208036N001-000 A/18
11 2 1.16 .500 Nickel Gold 1208038N000-000 A/18
Heli-Grip for Flexible Cable
§5, 6 § 2 1.16 .500 Nickel Silver ( C) 1208018N005-001 E/03
Crimp Type for Flexible Cable
5 3 1.16 .500 Nickel Gold 1210017N000-000 B/05
6 3 1.16 .500 Nickel Gold 1210013N000-000 B/05
7 3 1.16 .500 Nickel Gold 1210020N000-000 B/05
7 3 1.06 .410 Nickel Silver 1210020N001-000 ** ***
Solder-Clamp for Semi-Rigid Cable
13 2 1.16 .500 Nickel* Gold 1208031N003-000 F/08
14 2 1.16 .500 Nickel* Gold 1208025N003-000 F/07
§Except RG-223/U. *Solder ferrule is gold plated.
• **Indicates crimp center contact. • ***Contact factory for cable assembly instructions.

TNC Cable Jacks
Bulkhead Jacks - For Flexible & Semi-Rigid Cable
C dia.
C
(crimp sleeve)
B .687 B .687
A hex A hex
Figure 1 Figure 2


5, 6 1 1.16 .680 .500 59 .110 Nickel Gold 1216015N590-000 A/17
5, 6 1 1.16 .680 .500 59 .110 Nickel Gold ( C) 1216015N591-000 A/17
5, 6 1 1.16 .810 .500 59 .240 Nickel Gold ( C) 1216015N59E-000 A/17
7 1 1.16 .680 .500 59 .110 Nickel Gold 1216021N590-002 A/17
7 1 1.16 .680 .500 59 .110 Nickel Gold ( C) 1216021N591-000 A/17
7 1 1.16 .810 .500 59 .240 Nickel Gold ( C) 1216021N59E-000 A/17
9 1 1.16 .680 .500 59 .110 Nickel Gold 1216036N590-000 A/17
9 1 1.16 .680 .500 59 .110 Nickel Gold ( C) 1216036N591-005 A/18
11 1 1.16 .680 .500 59 .110 Nickel Gold 1216038N590-002 A/18
11 1 1.16 .680 .500 59 .110 Nickel Gold ( C) 1216038N591-001 A/18
§5, 6 § 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1216018N595-000 E/03
RG-223 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1216015N595-001 E/03
8A 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1216029N595-000 E/03
8B 1 1.16 .810 .500 59 .240 Nickel Silver ( C) 1216043N595-000 E/03
Crimp Type for Flexible Cable
5 2 1.31 .680 .500 59 .110 Nickel Gold 1219017N590-000 B/13
6 2 1.31 .680 .500 59 .110 Nickel Gold 1219013N590-002 B/13
7 2 1.31 .680 .500 59 .110 Nickel Gold 1219020N590-000 B/13
13 1 1.16 .680 .500 59 .110 Nickel* Gold 1216031N593-000 F/08
14 1 1.16 .680 .500 59 .110 Nickel* Gold 1216025N593-000 F/07
§Except RG-223/U. * Solder ferrule is gold plated.

TNC Cable Jacks
Bulkhead Jacks - For Flexible & Semi-Rigid Cable
C dia.
C dia.
B B
A A
Figure 1 Figure 2


1 1 1.75 .630 .750 33 Nickel Gold 1211001N330-000 A/20
2, 3 1 1.75 .630 .750 33 Nickel Gold 1211004N330-000 A/20
5, 6 2 1.16 .550 .500 07 Nickel Gold 1211015N070-000 A/17
5, 6 2 1.16 .550 .500 07 Nickel Gold ( C ) 1211015N071-000 A/17
7 2 1.16 .550 .500 07 Nickel Gold 1211021N070-000 A/17
7 2 1.16 .550 .500 07 Nickel Gold ( C ) 1211021N071-000 A/17
9 2 1.16 .550 .500 07 Nickel Gold 1211036N070-000 A/18
9 2 1.16 .550 .500 07 Nickel Gold ( C ) 1211036N071-000 A/18
11 2 1.16 .550 .500 07 Nickel Gold 1211038N070-000 A/18
§5, 6 § 1 1.16 .550 .500 07 Nickel Silver ( C) 1211018N075-001 E/03
RG-223 1 1.16 .550 .500 07 Nickel Silver ( C) 1211015N075-000 E/03
8A 1 1.16 .550 .500 07 Nickel Silver ( C) 1211029N075-000 E/03
8B 1 1.16 .550 .500 07 Nickel Silver ( C) 1211043N075-000 E/03
13 1 1.16 .550 .500 07 Nickel* Gold 1211031N073-000 F/08
14 1 1.16 .550 .500 07 Nickel* Gold 1211025N073-000 F/07
§Except RG-223/U. * Solder ferrule is gold plated.

TNC Receptacles
C D B
slot C ( I.D. )
width
D
B C dia. B
A .090 A
A Figure 3
Figure 1 (Solder pot contact)
Figure 2
(Turret contact) (Slotted contact) See page 201 for
MIL-PRF-39012 QPL version.
D .161 dia. B
C ( I.D. ) .050
dia.
B C
A D A
Figure 4 Figure 5
(Solder pot contact, 1" square flange, (Post contact)
.275 .161 dia.

dia. B
.085 .050 dia. B
dia.
C C
D A D A
Figure 6 Figure 7
(Post contact) (Post contact, 1/ 2 " square flange,
interchangeable with SMA standard flange size)

Figure Delta P/N
1 1.06 .630 .090 — 07 Nickel Silver ( C) 1212000N070-000
2 .715 .050 .085 .012/.017 09 Nickel Gold ( C) * 1243000F09E-001
2 .715 .050 .085 .036/.040 09 Nickel Gold ( C) * 1243000F09E-002
3 1.06 .630 .062 .090 07 Nickel Gold ( C) 1213000N071-000
3 1.06 .630 .062 .090 08 Nickel Gold ( C) 1213000N080-000
3 1.06 .630 .062 .090 09 Nickel Gold ( C) 1213000N090-000
3 1.06 .630 .062 .090 18 Nickel Gold ( C) 1213000N180-000
4 1.06 .630 .062 .080 33 Nickel Gold ( C) 1213000N330-000
5 .715 .090 .175 .375 09 Nickel Gold ( C) 1258000N091-009
6 .750 .080 .000 1.25 18 Nickel Gold ( C) 1258000N181-000
6 .750 .080 .590 .705 18 § Nickel Gold ( C) * 1258000N181-009
7 .750 .080 .590 .705 05 Nickel Gold ( C) 1258000N051-000
• (C) in contact plating column indicates captive contact. • *Indicates epoxy-captivated contact.
• §Flange #18 except with .125 dia. mounting holes. • See page 6 for alternate body plating information.

TNC Receptacles
Right Angle & Panel Jack Receptacles - Square Flange
C
C
D ( I.D. ) D ( I.D. )
A
A
B B
Figure 1 Figure 2
(Solder pot contact) (Solder pot contact, 1" square flange,

Figure Delta P/N
1 1.06 .910 .650 .062 07 Nickel Gold ( C) 1215000N070-000
1 1.06 .910 .650 .062 08 Nickel Gold ( C) 1215000N080-000
1 1.09 .910 .610 .062 18 Nickel Gold ( C) 1215000N180-000
2 1.22 .910 .650 .062 33 Nickel Gold ( C) 1215000N330-000
Panel Plug Receptacles - Square Flange
D D
C ( I.D. ) C ( I.D. )
B B
A A
Figure 1 Figure 2
(Solder pot contact, 3/ 4" square flange) (Solder pot contact, 1" square flange,
D B
slot
width
Figure 3
(Slotted contact, 11 / 16 " square flange)
C dia.
.090
A

Figure Delta P/N
1 1.16 .740 .062 .090 18 Nickel Gold ( C) 1223000N180-000
2 1.16 .740 .062 .080 33 Nickel Gold ( C) 1223000N330-000
3 .830 .050 .083 .012/.017 09 Nickel Gold ( C) 1259000N091-001
3 .830 .050 .083 .030 09 Nickel Gold ( C) 1259000N091-002
3 .830 .050 .083 .040 09 Nickel Gold ( C) 1259000N091-003

TNC Receptacles
.042
dia.
Grounding lug
C ( I.D. )
C ( I.D. )
.500 B
dia. A .625 dia. B
A
Figure 1
(Front mount) Figure 2
(Rear mount, with grounding lug)
C ( I.D. ) C ( I.D. )
.594 B
B .687 dia. A
A dia.
Figure 4
Figure 3 (Front mount, hermetically sealed,
(Rear mount, hermetically sealed, with mounting gasket)
.594 C
dia.
.059 ( I.D. )
Figure 5
(Right angle, with mounting gasket)
A

Figure Delta P/N
1 1.06 .470 .062 .130 62 Nickel Gold ( C) 1220000N620-000
1 1.19 .470 .062 .260 62 Nickel Gold ( C) 1220000N62E-001
1 1.06 .470 .062 .130 65 Nickel Gold ( C) 1220000N650-000
1 1.06 .470 .062 .190 65 Nickel Silver ( C) 1220000N656-000
1 1.06 .470 .062 .190 65 Nickel Gold ( C) 1220000N65E-000
1 1.19 .470 .062 .260 65 Nickel Gold ( C) 1220000N65G-000
2 1.06 .750 .062 .160 59 Nickel Gold ( C) 1221000N591-003
3 1.20 .830 .062 .260 59 Nickel Gold ( C) 1221000N598-000
4 1.20 .520 .062 .260 65 Nickel Gold ( C) 1220000N638-000
5 .970 1.22 .590 .130 65 Nickel Gold ( C) 1222000N630-001
5 .970 1.34 .590 .250 65 Nickel Gold ( C) 1222000N630-002
See page 6 for alternate body plating information. • All items are available with other flange sizes and contact configurations.

TNC Receptacles

Component housing
These connectors eliminate the need for complicated mounting hole
patterns and mounting hardware.
They are simply pressed into a single through hole, and the precisely-
engineered knurled mounting section provides retention strength
far greater than normal mating and unmating forces. An integral
shoulder provides a positive stop when mounting.
Internal
Circuitry PressMounts are available for a wide variety of Delta connector series,
and can be used in packages as small as the outer diameter of the
connector body.
.43 dia. .600 .43 dia. .600

A A
B dia. B ( I.D. )
.316 .316 .083 dia.

Figure 1 Figure 2
(Post contact) (Solder pot contact)
.625 dia. .600 .625 dia. .800

A A
B dia. B dia.
.454 .25 .454 .25
dia. over knurl dia. over knurl
Figure 3 Figure 4
(Post contact) (Plug type, post contact)

Figure Delta P/N
8 holes, A dia. x B deep D .63 dia.
Figure 1 C dia. b.c. .750

dia.
E dia. x F deep H
G
Dimensions Plating
Figure Delta P/N
1 .078 .310 .500 .063 .063 .220 .828 .375 Nickel Gold ( C ) 1256000N000-002
1 #2-56 .250 .500 .063 .063 .220 .828 .375 Nickel Gold ( C ) 1256000N000-003

TNC Accessories
Resistive Termination (Plug Type)
A A
C ( I.D. ) C ( I.D. )
B B
Figure 1 Figure 2
(Safety-wire holes in coupling nut)
Dimensions Plating
Resistor Fig. Features Delta P/N
A B C Body Contact
51 Ω ±5%, 1/2 Watt 1 1.25 3.50 .144 Bead chain Nickel Gold ( C) 1231000N000-000
51 Ω ±5%, 1/2 Watt 1 1.25 .— . — No chain Nickel Gold ( C) 1231000N00A-000
75 Ω ±1%, 1/2 Watt 2 1.25 3.50 .144 Bead chain Nickel Gold ( C) 1231000N000-005
75 Ω ±1%, 1/2 Watt 1 1.25 .— . — No chain Nickel Gold ( C) 1231000N00A-002
Dust Caps
Figure 1 A Figure 2 A
C ( I.D. ) C ( I.D. )
B B
Dimensions Plating
A B C Body Contact
1 .370 .— .— No chain Nickel — 1232000N00A-000
1 .690 2.25 .144 Bead chain / shorting type Nickel Gold ( C ) 1232000N00C-000
2 .580 .— .— No chain Nickel — 1233000N00A-000
2 .690 2.50 .144 Bead chain / shorting type Nickel Gold ( C ) 1233000N00C-000
Dummy Receptacle
A
Dimensions Plating
A B Body Contact
. 715 . 080 09 N ick e l — 1263000N090-000
• See page 203 for mounting dimensions. • Caps and terminations are available with other chain styles and/or resistances.

TNC Accessories
Keying Baskets - For Polarization Of Mated Pairs
Multiple Polarizations in a Single Installation

In applications with multiple connector pairs, these keying baskets polarize
individual jacks so they can only be mated with plugs that have coupling nuts
modified with the correct groove orientation.
The grooves in the plug coupling nuts engage the keying bars in the basket, making
it impossible to mismate pairs, even by force.
The keying baskets can be used with any TNC jack—they slide over the jack’s
mating threads and are secured with a Truarc retaining ring. Any Delta TNC plug
can be supplied with a grooved coupling nut to match any keying basket.
Application Example
Panel
Jack with keying basket installed Plug with grooved coupling nut
Panel
Mated pair
C B
A
Figure 1
Dimensions
A B C D
1 .430 .730 72° 120° Silver 1261000A00M-001
1 .430 .730 96° 96° Silver 1261000A00M-002
1 .430 .730 120° 144° Silver 1261000A00M-003
1 .430 .730 72° 144° Silver 1261000A00M-004
1 .430 .730 120° 120° Silver 1261000A00M-005
1 .430 .730 120° 72° Silver 1261000A00M-006

TNC Adapters
Bulkhead & Panel Mounted Jack-Jack Adapters (Connect Two Plugs)
B
B C dia. A
A
Figure 1 Figure 2
(Bulkhead mount) (Panel mount)

Figure Delta P/N
1 1.28 .800 .625 .160 59 Nickel Gold ( C ) 1226000N591-001
1 1.39 .760 .690 .190 59 Nickel Gold ( C ) 1226000N598-002 *
2 1.28 .690 .— .— 07 Nickel Silver ( C ) 1225000N070-001
* Hermetically sealed, with mounting gasket.
Straight Adapters
B dia.
A A
Figure 1 Figure 2
A
Figure 3
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.28 .440 Nickel Silver ( C) 1228000N000-000
2 1.25 .— Nickel Gold ( C) 1227000N000-000
3 1.22 .— Nickel Gold ( C) 1234000N000-000
See page 208 for mounting dimensions.

TNC Adapters
Right Angle Adapters
B
B
A
Figure 1 A
Figure 2
(Right angle plug–plug;
connects two jacks)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.03 .950 Nickel Gold ( C ) 1229000N000-000
2 1.25 1.25 Nickel Gold ( C ) 1241000N000-000
Tee Adapters
Figure 1 Figure 2
(Tee jack–jack–jack; B (Tee jack–plug–jack; B
connects three plugs) connects two plugs
and one jack)
A
A
Figure 3 Figure 4
(Tee plug–jack–plug; B (Tee jack–jack–plug; B
connects two jacks connects two plugs
and one plug) and one jack)
A A
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.28 .880 Nickel Gold ( C) 1238000N000-000
2 1.28 1.03 Nickel Gold ( C) 1230000N000-000
3 1.88 .950 Nickel Gold ( C) 1242000N000-000
4 1.48 1.06 Nickel Silver ( C) 1249000N000-000

Polarized TNC Connectors
Cable Plugs & Jacks
B (crimp sleeve)
Female center contact Male center contact
B
A (crimp sleeve)
A
Figure 1 Figure 2
(Crimp type plug) (Crimp type jack)
.11 max. panel
Male
center
contact
C
(crimp sleeve)
B .687
A hex
Figure 3
(Crimp type bulkhead jack)

5 1 1.06 .500 .— — Nickel Gold 1203017N002-000 B/23
5 2 1.16 .500 .— — Nickel Gold 1210017N002-000 B/05
5 3 1.31 .680 .500 59 Nickel Gold 1219017N592-000 B/13
6 1 1.06 .500 .— — Nickel Gold 1203013N002-000 B/23
6 2 1.16 .500 .— — Nickel Gold 1210013N002-000 B/05
6 3 1.31 .680 .500 59 Nickel Gold 1219013N592-000 B/13
Jack Receptacles
C ( I.D. ) D max. panel

C ( I.D. )
Male center contact
Male center contact
D
B .500 B
A dia. A
Figure 1 Figure 2
(Panel jack receptacle) (Bulkhead jack receptacle)

Figure Delta P/N
1 1.06 .630 .062 .090 07 Nickel Gold ( C) 1213000N072-005
1 1.16 .630 .062 .090 09 Nickel Gold ( C) 1213000N092-000
2 1.06 .470 .062 .130 62 Nickel Gold ( C) 1220000N622-000
2 1.06 .470 .062 .190 65 Nickel Gold ( C) 1220000N652-001

TPS Connectors
General Description
Delta TPS connectors are subminiature, 50 Ω impedance connectors with three-stud bayonet coupling.
This interface design allows for quick mating and unmating, but prevents the mated pairs from rocking and improves
electrical performance over that of BNC connectors. They are best suited for use with cables in the range of .100" to
.250" diameter. Gold plating is standard for bodies in this series, but all Delta TPS connectors are available with nickel-
plated bodies for reduced cost.
TPS Configurations
Straight Cable Plugs .................................................154

Right Angle Cable Plugs .........................................154
Straight Cable Jacks ..................................................154
Bulkhead Cable Jacks ...............................................154
Panel Jack Receptacles (square flange) .............155
Bulkhead Jack Receptacles ....................................155
Right Angle Bulkhead Jack Receptacles ...........155
Dummy Receptacles ................................................155
In-Series Adapters .....................................................155
TPS Specifications*
Jack Interface** Plug Interface**
120 ° typ.
.126/.129
.255 .303
.259 .307
120 ° typ. .028/.030
.123/.125
.252/.256
Frequency Range: DC–10 GHz. Male Contacts: Brass per ASTM B16.
Voltage Rating: 1,500 volts RMS. Female Contacts: Beryllium Copper per ASTM B196.
Dielectric Withstanding Voltage: 1,000 volts RMS. Contact Plating: Gold per MIL-DTL-45204.
Gaskets: Silicone rubber per ZZ-R-765, Class II,
Grade 50.
Other Metal Parts: Brass per ASTM B16, plated
All other specifications are in accordance with the latest issues of MIL-PRF-39012, or MIL-C-55235, or
other applicable MIL specifications.
*These specifications are typical and may not apply to all connectors. Detailed specifications for individual

TPS Cable Connectors
B hex
B A
hex B dia.
B
A A .34 dia.
A
(Wedge clamp) (Wedge clamp) (Military clamp) Figure 4
(Military clamp)

Figure Delta P/N
5 1 .940 .344 Gold Gold UG-1366/U ***
5 3 .900 .340 Gold Gold 4401018G000-000 A/33
5, 6 4 .850 .730 Gold Gold ( C) 4404015G000-000 ***
6 1 .940 .406 Gold Gold UG-1412/U ***
6 2 .940 .406 Gold Gold ( C) 4401013G005-000 ***
6 3 .900 .340 Gold Gold 4401013G000-000 A/33
7 2 .940 .500 Gold Gold ( C) 4401019G005-000 ***
8A 2 .940 .344 Gold Gold ( C) 4401029G005-000 ***
8B 3 .900 .340 Gold Gold 4401043G000-000 A/33
9 2 .940 .344 Gold Gold ( C) 4401036G005-000 ***
9 3 .900 .340 Gold Gold 4401036G000-000 ***
9 4 .910 .730 Gold Gold ( C) 4404036G000-000 A/34
Straight & Bulkhead Jacks - For Flexible Cable

.22 max. panel
B dia. C dia.
A C hex
B .563
A hex
Figure 1
(Military clamp) Figure 2
(Rear mount, wedge clamp)

5, 6 1 .880 .340 .375 — Gold Gold 4408013G000-000 A/33
5, 6 2 1.05 .680 .410 62 Gold Gold UG-1413/U ***
7 1 .880 .340 .375 — Gold Gold 4408019G000-000 A/33
7 2 1.05 .680 .410 62 Gold Gold 4416019G620-000 ***
9 1 .880 .340 .375 — Gold Gold 4408036G000-000 A/33
9 2 .910 .680 .340 62 Gold Gold ( C ) 4416036G620-000 ***
11 2 .960 .680 .340 62 Gold Gold ( C ) 4416038G620-000 ***

TPS Receptacles / Adapters
Bulkhead & Panel Receptacles
.500 dia. D
D max. panel
max. panel
C ( I.D. ) C ( I.D. )
A
B .438
A hex
.56
B
Figure 1 Figure 2
(Bulkhead jack, front mount, with mounting gasket) (Right angle bulkhead jack, front mount,
C
D ( I.D. ) B
.180
dia. B A
A
Figure 3 Figure 4
(Panel mount jack) (Panel mount dummy receptacle)

Figure Delta P/N
1 1.11 .400 .040 .250 66 Gold Gold ( C ) UG-1365/U
2 .730 1.28 .040 .250 84 Gold Gold ( C ) 4422000G840-001
3 .780 .450 .160 .040 04 Gold Gold ( C ) 4413000G041-000
4 .470 .085 .— .— 09 Silver — 4463000A000-000
Bulkhead Mounted Jack–Jack Adapter

(Connects two plugs)
B C hex
A
Figure 1

Figure Delta P/N
1 1.20 .800 .562 .250 62 Gold Gold ( C ) 4444000G628-000

TRB Connectors
General Description
Delta TRB connectors are compact, triaxial connectors with three-stud bayonet coupling. They are similar in size to BNC
connectors, and can be used with a wide range of twinaxial and triaxial cables.
Their three-stud mating prevents rocking of mated pairs and ensures the low leakage and excellent shielding required in
data-bus and other high-speed digital applications. Delta TRB connectors are designed and manufactured to meet the
requirements of MIL-C-49142.
TRB Configurations
Straight Cable Plugs ........................................................157

Bulkhead Cable Jacks ......................................................157
Panel Jack Receptacles (square flange) ....................157
Bulkhead Jack Receptacles ...........................................157
TRB Specifications*
Plug Interface** Electrical:

Reference Plane Nominal Impedance: Nonconstant.
.001 min.
Frequency Range: DC–500 MHz.
.007/.033 Voltage Rating: 400 volts RMS.
.008/.042 Dielectric Withstanding Voltage : 1,200 VRMS.
.385/.390 Insulation Resistance: 5,000 megohms.
120 ° typ.
Materials/Finishes:
.037/.039 Female Contacts: Beryllium Copper per
.123 ASTM B196.
min. Contact Plating : Silver per ASTM B700, or
.213 meet gage requirements Gold per MIL-DTL-45204.
.242 of MIL-C-49142.
.213
min. Class II, Grade 50.
Silver per ASTM B700,
or Nickel per AMS-QQ-N-290.
All other specifications are in
Jack Interface** Reference
Plane accordance with the latest issues of
.327/.335 MIL-PRF-39012, or MIL-C-49142, or
.165/.203 other applicable MIL specifications,
.213 max.
.187/.213 and interfaces are in accordance
.001 min. with MIL-STD-348.
.319/.321
*These specifications are typical and
.169/.171
may not apply to all connectors.
.378 .432 .346 .327 .195 .178 .117/.122 Detailed specifications for individual
.382 .436 .356 .333 .199 .182 connectors are available on request.
.062/.064
120 ° typ.
.204/.208
.075/.081 .206/.213

TRB Connectors
Cable Connectors
B dia. .23 max. panel
A C dia. B .687
Figure 1 A dia.
(Straight plug, wedge-clamp hardware) Figure 2
(Bulkhead jack, wedge-clamp hardware)

27 1 1.31 .500 .— — Nickel Gold ( C) 2001099N000-000 ***
27 2 1.50 .800 .500 59 Nickel Gold ( C) 2016099N591-000 ***
28 1 1.88 .750 .— — Nickel Gold ( C) 2001070N000-000 ***
30 1 1.31 .500 .— — Nickel Gold ( C) 2001235N000-000 ***
30 2 1.50 .800 .500 59 Nickel Gold ( C) 2016235N591-001 ***
.042 dia. wire hole Grounding lug (middle conductor)
C ( I.D. ) D
B
A
Figure 1
(Panel jack receptacle)
Grounding lug
(middle conductor)
Grounding lug .109 dia.
(outer conductor) wire hole
.042 dia. wire hole B
C ( I.D. )
D max. panel .562 dia.
A
Figure 2
(Bulkhead jack receptacle, front mount)

Figure Delta P/N
1 1.07 .670 .040 .090 09 Nickel Gold ( C ) 2013000N091-002
2 1.14 .490 .040 .125 62 Nickel Gold ( C ) 2020000N621-003
• Contact factory for other twinaxial/triaxial cable accommodations.

• See page 209 for cable groups. • See page 6 for alternate body plating information. • ***Contact factory for cable assembly instructions.

TW34 Connectors
General Description
Delta TW34 series connectors are economical, medium-size twinaxial connectors with 3 ⁄4 "-20 threaded coupling.
Their characteristic 95 Ω impedance makes them ideal for use with RG-22/U and similar Belden, IBM, and other
twinaxial cable commonly used in LAN installations.
Plugs in TW34 series contain two male contacts, and jacks contain two female contacts, with mating polarization
provided by a a key in the jack which engages a keyway in the plug. The insulators of both plugs and jacks are marked
to indicate location of the bare-copper wire of the cable conductor pair.
Delta TW34 connectors are designed and manufactured to meet the requirements of MIL-C-3655.
TW34 Configurations
Cable Plugs.......................................................158 Panel Jack Receptacles (square flange) ..............160
Cable Jacks ......................................................159 In-Series Adapters .......................................................160
Bulkhead Jack Receptacles .......................159
TW34 Specifications*
*These specifications are typical and
Plug Interface** Jack Interface** .215 may not apply to all connectors.
.240
.250 .388 ±.002
.125 Detailed specifications for individual
**Some proportions altered
.671 .620 .533 .590
.533 .765 ±.005 ±.003 .250 ±.002 ±.005 to illustrate detail.
.250 ±.005 ±.005
.062 typ. All other specifications are in
.053 ±.001 typ. accordance with the latest issues of
Polarizing key MIL-PRF-39012, MIL-C-3655, or
.750-20 UNEF-2B other applicable MIL specifications.
Polarizing slot .750-20 UNEF-2A
Frequency Range: DC–200 MHz (Optimal), Male Contacts: Brass per ASTM B16.
DC–500 MHz (Useable). Female Contacts: Beryllium Copper per ASTM B196.
Voltage Rating: 500 volts RMS. Contact Plating : Silver per ASTM B700, or Gold per MIL-DTL-45204.
Dielectric Withstanding Voltage : 1,500 volts RMS. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.
Insulation Resistance: 5,000 megohms. Other Metal Parts: Brass per ASTM B16, plated:
Silver per ASTM B700, or Nickel per AMS-QQ-N-290.
Straight & Right Angle Plugs - Clamp Type For Flexible Cable
B dia. B
.75 dia.
A
A
Figure 2
Figure 1

Figure Delta P/N
27 1 1.88 .750 Nickel Silver 2601099N000-000 ***
28 1 1.88 .750 Nickel Silver UG-421B/U ***
28 2 1.56 1.88 Nickel Silver 2604070N000-000 ***
29 1 1.88 .750 Nickel Silver 2601201N000-000 ***
29 2 1.56 1.88 Nickel Silver 2604201N000-000 ***

TW34 Connectors
Cable Jacks
B dia. C dia.
A B
A
Figure 1 Figure 2
(Straight jack) (Panel jack)
.25 max. panel

C dia.
Figure 3
(Bulkhead jack,
B
A 1.25 dia.

28 1 1.59 .750 .— — Nickel Silver 2608070N000-000 ***
28 2 1.75 .690 .750 33 Nickel Silver UG-423B/U ***
28 3 1.75 .880 .750 51 Nickel Silver 2616070N511-000 ***
29 2 1.75 .690 .750 33 Nickel Silver 2611201N331-000 ***
29 3 1.75 .880 .750 51 Nickel Silver 2616201N511-000 ***
Bulkhead Receptacles - Solder Pot Contact
D max. panel D max. panel

C ( I.D. )
typ. .042 ( I.D. )
typ.
1.00 dia. B
A
Figure 1
(Bulkhead jack receptacle, front mount) C
1.00 dia. B
Figure 2
(Right angle bulkhead jack receptacle)

Figure Delta P/N
1 1.58 .785 .042 .250 51 Nickel Silver ( C ) 2620000N511-000
2 1.53 1.75 .970 .250 51 Nickel Silver ( C ) 2622000N511-000
• See page 209 for cable groups. • ***Contact factory for cable assembly instructions. • See page 208 for mounting dimensions.

TW34 Adapters
C ( I.D. ) D
typ.
Figure 1
B
A

Figure Delta P/N
1 1.18 .710 .059 .080 33 Nickel Silver ( C ) UG-422/U
Bulkhead Jack-Jack Adapter (Connects Two Plugs)
B
A C dia.

Delta P/N
1.67 .880 1.25 .250 51 Nickel Silver ( C ) UG-493A/U
A
Figure 2
(Right angle jack-plug;
connects one plug
and one jack)
B
A B dia.
Figure 1
(Straight jack–jack; connects two plugs)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.67 .750 Nickel Silver ( C ) 2626000N000-000
2 1.56 1.38 Nickel Silver ( C ) UG-981/U


TWBNC Connectors
General Description
Delta TWBNC connectors are compact, 78 Ω impedance twinaxial connectors with two-stud bayonet coupling.
They are similar in size to BNC connectors, and are best suited for use with RG-108/U and similar twinaxial cables.
Both plugs and jacks in TWBNC series contain one male contact and one female contact, with mating polarization
provided by a stepped insulator. Delta TWBNC connectors are designed and manufactured to meet the requirements
of MIL-C-3655.
TWBNC Specifications*
Electrical:
.028/.042
Reference Plane
Plug Interface** Nominal Impedance: 78 Ω.
.032/.062 Frequency Range: DC–500 MHz.
.061 Voltage Rating: 500 volts RMS.
.064 .062/.064 Dielectric Withstanding Voltage: 1,500 VRMS.
CL
*See .385 179 ° .463 Insulation Resistance: 5,000 megohms.
below .390 181 ° .473
.037
Materials/Finishes:
.062/.064
.035/.065
.228/.260 meet gage requirements
.091 Female Contacts: Beryllium Copper per ASTM B196.
.206/.228 of MIL-C-3655/15.
.097 Contact Plating: Silver per ASTM B700, or
Jack Interface** .415 min.
Reference Plane
.170/.200 Class II, Grade 50.
.432/.436 .188/.206 .061
.064 Other Metal Parts: Brass per ASTM B16, plated:
.062/.064 Silver per ASTM B700, or Nickel per AMS-QQ-N-290.
.262 .378 .345 .327 .319 All other specifications are in accordance with the latest
max. .381 .356 .336 CL .321 issues of MIL-PRF-39012, or MIL-C-3655, or other applic-
.075 .062/.064 able MIL specifications, and interfaces are in accordance
.081 .037 with MIL-STD-348.
179 ° .015/.030 .039 *These specifications are typical and may not apply to all
181 ° .000/.040
.171/.200
connectors. Detailed specifications for individual
.000/.028 connectors are available on request.
.329/.333
Cable Connectors - For Flexible Cable

Figure 1 Figure 2
(Cable plug, (Cable plug,
clamp type) crimp type)
A A
B dia. C dia. .24 max. panel
Figure 3 Figure 4
(Straight jack, (Bulkhead jack,
clamp type) rear mount,
clamp type)
A B .687
A hex

27 1 1.16 .500 .— .— Nickel Gold ( C) 6101099N001-000 ***
27 2 1.28 .410 .— .— Nickel Silver ( C) 6102099N001-000 ***
27 3 1.13 .500 .— — Nickel Gold ( C) 6108099N001-000 ***
27 4 1.13 .810 .500 59 Nickel Gold ( C) 6116099N591-000 ***

TWBNC Receptacles / Adapters
Jack Receptacles
D max. panel
C ( I.D. )
Figure 1
(Bulkhead jack receptacle, Fits .062 max. board
front mount, .038 dia. typ. C B
solder pot contacts) .500 B
dia. A
.687
sq.
Fits .062 max. board A
.038 dia. typ. C
.500 D dia.
Figure 2 D dia. typ. contacts
contacts
(Straight PCB receptacle) .687
sq.
Figure 3
(Right angle PCB receptacle)
.500 typ.
B
A
Figure Delta P/N
1 1.05 .470 .042 .106 65 Nickel Gold ( C ) 6120000N651-000
2 .650 .085 .125 .038 PCB04 Nickel Silver ( C ) 6158000N13P-000
3 1.34 .520 .125 .038 PCB04 Nickel Silver ( C ) 6169000N13P-000
Adapters
.16 max. panel B dia.
B C dia. A
A
Figure 1 Figure 2
(Straight jack-jack bulkhead adapter; connects two plugs) (Straight jack-jack adapter; connects two plugs)
B
B
A A
Figure 3 Figure 4
(Tee jack–jack–jack; connects three plugs) (Tee jack–jack–plug; connects two plugs and one jack)

Figure Delta P/N
1 1.28 .800 .625 59 Nickel Gold ( C) 6126000N591-000
2 1.28 .440 .— — Nickel Gold ( C) 6128000N000-000
3 1.28 .890 .— — Nickel Gold ( C) 6150000N000-000
4 1.28 1.03 .— — Nickel Gold ( C) 6130000N000-000
• See page 209 for cable groups. • See page 6 for alternate body plating information. • ***Contact factory for cable assembly instructions.

UHF Connectors
General Description
Delta UHF connectors are economical, medium size, nonconstant impedance connectors with 5 ⁄ 8 "-24 threaded coupling.
These connectors are not weatherproof. UHF connectors are best suited for use in low-frequency applications.
Adapters between UHF and other series are shown starting on page 174.
UHF Specifications
Nominal Impedance: Nonconstant. Insulators: Teflon per ASTM D1710. Contact Plating: Silver per ASTM B700.
Frequency Range: DC–200 MHz, Male Contacts: Brass per ASTM B16. Other Metal Parts: Brass per ASTM
use with caution to 500 MHz. Female Contacts: Beryllium Copper per B16, plated Silver per ASTM B700, or
Voltage Rating: 500 volts RMS. ASTM B196. Nickel per AMS-QQ-N-290.

B (crimp sleeve)
Figure 1 Figure 2
(Compression clamp) (Crimp type)
A A
Cable Dimensiosn Plating Assembly Procedure/
Figure Delta P/N
2, 3 1 1.56 .— Silver Silver ( C) PL-259A ***
3 2 1.44 .630 Nickel Silver ( C) 5003005N001-000 ***
5 2 1.44 .500 Nickel Silver ( C) 5003012N001-000 ***
6 2 1.44 .500 Nickel Silver ( C) 5003013N001-000 ***
7 1 1.56 .— Silver Silver ( C) UG-203/U ***

D
C ( I.D. )
Figure 1
(Panel jack receptacle)
B
A
C ( I.D. ) D
C ( I.D. )
Figure 3
(Panel plug receptacle)
.625 B
dia. A
Figure 2 B
(Bulkhead jack receptacle, front mount) A

Figure Delta P/N
1 1.18 .700 .100 .080 33 Nickel Silver ( C ) 5013000N331-000
2 1.25 .657 .062 .125 65 Nickel Silver ( C ) 5020000N651-000
3 1.03 .720 .100 .080 33 Nickel Silver ( C ) 5023000N331-001
• See page 209 for cable groups. • ***Contact factory for cable assembly instructions. • See page 208 for mounting dimensions.

1.0/2.3 Connectors
General Description
Delta 1.0 / 2.3 series jacks are compact, high-performance connectors that mate with all five standard types of 50 ohm
1.0 / 2.3 series plugs.
Designed to meet all applicable CECC and DIN requirements, they good electrical performance up to 10 GHz.
These connectors are ideal for use in rack-and-panel applications with appropriate slide-on mating plugs.
Current configurations include direct-solder bulkhead jacks for semi-rigid cable, along with two- and four-hole flange
panel jacks with post contacts. New types are being added to our product line, so please call with your requirements for
other 1.0 / 2.3 configurations.
1.0/2.3 Configurations
Straight P.C. Board Jack Receptacle ................................................................164
Panel Jack Receptacles.........................................................................................165
Bulkhead Cable Jacks............................................................................................165
1.0/2.3 Specifications*
Electrical:
Jack Interface** Nominal Impedance: 50 ohms.
6.40
Frequency Range: DC–10 GHz.
6.50 Voltage Rating: 250 volts RMS (dependent on cable).
5.80 Dielectric Withstanding Voltage : 750 volts RMS.
Reference Plane 5.90
2.30 Insulation Resistance: 1,000 megohms.
Materials/Finishes:
1.00
4.03 3.00 Female Contacts: Beryllium Copper per ASTM B196.
4.15 3.06
Other Metal Parts: Brass per ASTM B16, gold plated per
1.15 MIL-DTL-45204.
1.75
1.80 All other specifications are in accordance with the latest
1.90
issues of CECC 22 230, DIN 41626, or DIN 47297, or other
**Some proportions altered to illustrate detail. Dimensions in mm. applicable specifications, and interfaces are in accordance
with IEC 169-29.
*These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors
Printed-Circuit Board Jack Receptacle
.236 sq.
.059 sq. typ.
.037
sq. typ.
.035
dia. .020
B A
Figure 1
(Straight through-hole mount)

Figure Delta P/N
1 .433 .138 .100 PCB06 Gold Gold ( C ) 4267000G91P-001
• See page 208 for mounting figures. • (C) in contact plating column indicates captive contact.

1.0/2.3 Connectors
Panel Jack Receptacles - Post Contact
M5.5 x 0.5 6g thread

.102 dia. typ.
C B .065 C B M5.5 x 0.5
.102 6g thread
dia. typ.
.340 .625
typ. .481
.050 .162 .050 .162
dia. dia. dia. dia. .065
.500 sq. A .516 .223 A .516
Figure 1 ( 1/ 2 " square flange) Figure 2 (2-hole flange)
Dimensions Plating
Figure Delta P/N
A B C Body Contact
1 .705 .590 .115 Gold Gold (C) 4258000G051-000
1 .250 .150 .100 Gold Gold (C) 4258000G051-010
2 .705 .590 .115 Gold Gold (C) 4258000G921-002
2 .250 .150 .100 Gold Gold (C) 4258000G921-003
Bulkhead Jacks - Direct Solder For Semi-Rigid Cable
'O' ring .312 hex nut

1/4 -36 UNS-2A thread .234
M5.5 x 0.5 6g thread
B (I. D.)
A (O. D.) C max. panel
.437 hex
.080 .650
.980
Cable Dimensions Mounting Plating

Delta P/N
Group A B C Figure Body Contact
13 .184 .145 .125 67 Gold Gold 4217031G673-000
14 .120 .088 .125 67 Gold Gold 4217025G673-000
Assembly Procedure
1) Trim cable as shown. .080

Remove any burrs from jacket and center conductor.
Tin center conductor. .120
2) Solder contact to center conductor, with end of contact
flush with cable dielectric.
Remove any excess solder from outside of contact.
Soft solder Body assembly

3) Insert cable into body until end of all around
cable jacket stops against internal shoulder.
Solder cable jacket to body.
Receptacles also available with other contact / insulator configurations. • (C) in contact plating column indicates captive contact.
See page 208 for mounting figures. • See page 209 for cable groups.

2

7/16 Connectors
General Description
Delta 7/16 series connectors are medium size, 50 Ω impedance connectors with M29 x 1.5 metric threaded coupling.
These rugged connectors conform to DIN 47223, and feature good power-handling capability along with VSWR as low
as 1.07:1 @ 2 GHz. Because these connectors are designed to minimize signal distortion from intermodulation, silver
plating is standard. The optional Albaloy plating provides greatly increased tarnish resistance while preserving the
connectors’ low intermodulation characteristics; optional nickel plating should only be specified when low
intermodulation is not a concern in your system design.
As with our other connector series, Delta’s customer-driven design results in 7/16 series connectors with practical and
• VersaCom combination cable connectors (page 170) let you stock various body and cable attachment subassemblies,
and assemble them into straight or right angle connectors as needed.
• PressMount receptacles (pages 171 and 172) mount securely in a single round hole, saving space on your components
and reducing your housing fabrication costs.
• Panel receptacles with flange sizes to match the same hole pattern as standard type N connectors, letting you drill
one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed.
• All Delta 7/16 series plugs feature a coupling nut with a knurled surface for secure grip when hand-tightening,
and a hex for tightening with a wrench. All can be supplied with full-length hex coupling nuts as well.
Our 7/16 series product line is still growing, so please call if you don’t see what you need.
7/16 Configurations
Straight Cable Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Panel Jack Receptacles (Slotted contact) . . . . . . . . .172
Right Angle Cable Plugs . . . . . . . . . . . . . . . . . . . . . . .167 Panel Jack Receptacles (Post contact) . . . . . . . . . . . .172
Panel Cable Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 PressMount Plug Receptacles . . . . . . . . . . . . . . . . . . .173
Bulkhead Cable Jacks . . . . . . . . . . . . . . . . . . . . . . . . .169 Panel Plug Receptacles (Solder pot contact) . . . . . . .173
VersaCom Combination Cable Connectors . . . . .170 Panel Plug Receptacles (Threaded contact) . . . . . . .173
PressMount Jack Receptacles . . . . . . . . . . . . . . . . . .171 Panel Plug Receptacles (Tab contact) . . . . . . . . . . . . .174
Panel Jack Receptacles (Solder pot contact) . . . . .171 Panel Plug Receptacles (Slotted contact) . . . . . . . . . .174
Panel Jack Receptacles (Threaded contact) . . . . . .171 Panel Plug Receptacles (Post contact) . . . . . . . . . . . .174
Panel Jack Receptacles (Tab contact) . . . . . . . . . . . .172 Adapters Within and Between Series . . . . . . . . . . . . . .175
7/16 Specifications*
Electrical:
Materials/Finishes:
Frequency Range: DC–7.5 GHz.
Voltage Rating: 2,700 volts RMS. Male Contacts: Brass per ASTM B16.
Dielectric Withstanding Voltage : 4,000 VRMS. Female Contacts: Spring Brass per ASTM B16,
Insulation Resistance: 10,000 megohms. or phosphor bronze per ASTM B139
Contact Plating: Silver per ASTM B700,
Jack Interface** Plug Interface** or Gold per MIL-DTL-45204.
(All dimensions in millimeters.) (All dimensions in millimeters.)
Reference plane 4.5 max. Gaskets: Silicone rubber per ZZ-R-765,
Reference plane
8.1 min. Class II, Grade 50.
.5/.7 7.00/9.00
Other Metal Parts: Brass per ASTM B16,
15.85/16.25 plated Silver per
4.96/5.04 ASTM B700.
22.1 17.84 15.85
18.03 20.6
22.9 18.02* 16.25*
18.21 21.4
All other specifications are in accordance
with the latest issues of DIN 47223 or
7 nominal other applicable IEC, VG, or CECC
7 nominal
1.77/2.07 M29 x 1.5 thread M29 x 1.5 specifications.
5 min. thread
* Dimensions before slotting. 7.00/8.00 *These specifications are typical and may
1.4/1.6 not apply to all connectors. Detailed
1.47/1.77
to meet performance requirements. specifications for individual connectors

7/16 Cable Plugs
Straight Plug - For Flexible & Semi-Rigid Cable
B dia. B
(crimp sleeve )
B ( I.D. )
C dia.
A A A
(Clamp type for flexible cable) (Crimp type for flexible cable) (Solder type for semi-rigid cable)

Figure Delta P/N
2, 3 1 1.85 .750 .— Silver Gold ( C) 9201004A001-000 A/01
4 1 1.85 .750 .— Silver Gold ( C) 9201079A001-000 A/01
3, 4 2 1.89 .630 .— Silver Silver ( C) 9203005A001-000 ***
12 3 1.72 .254 .387 Silver Silver ( C) 9201050A003-002 ***
13 3 1.59 .148 .319 Silver Silver ( C) 9201031A003-000 ***
Right Angle Plug - For Flexible & Semi-Rigid Cable
A A
B B
Figure 1 Figure 2
(Clamp type for flexible cable (Crimp type for flexible cable)
or solder-clamp for semi-rigid cable)

Figure Delta P/N
2, 3 1 1.68 2.04 Silver Silver ( C) 9205005A001-002 A/35
4 1 1.68 2.04 Silver Silver ( C) 9205079A001-001 A/35
5, 6 1 1.68 1.53 Silver Silver ( C) 9205015A001-000 A/36
12 1 1.68 2.04 Silver Silver ( C) 9205050A003-001 ***
13 1 1.68 1.53 Silver Silver ( C) 9205031A003-000 ***
3, 4 2 1.68 1.86 Silver Silver ( C) 9207005A001-000 B/31
• See page 209 for cable groups. • Cable assembly instructions start on page 210. • ***Contact factory for cable assembly instructions.

7/16 Cable Jacks
Panel Mounted Jacks - For Flexible & Semi-Rigid Cable
A
.142 dia. typ. .197
C dia.
Figure 1
(Crimp type for flexible cable, .974
standard flange)
(CL )
typ.
B
1.25 sq. 1.17
A
.125 dia. typ. .080
C dia.
Figure 2
(Crimp type for flexible cable,
1" square flange; interchangeable .718
with type N standard flange)
(CL ) typ.
B
1.00 sq. 1.17
.142 dia. typ. .197

‘O’ ring
B ( I.D. )
Figure 3 .974
(Solder type for semi-rigid cable, (CL )
standard flange, with ‘O’ ring seal) typ.
C dia.
A
1.25 sq. .88
.125 dia. typ. .080

B ( I.D. )
Figure 4
(Solder type for semi-rigid cable, .718
1" square flange; interchangeable (CL ) typ.
with type N standard flange)
C dia. A
1.00 sq. 1.17

Figure Delta P/N
3, 4 1 2.34 1.17 .625 Silver Silver 9255005A911-000 B/19
6 1 2.21 1.04 .625 Silver Silver 9255015A911-000 B/19
3, 4 2 2.34 1.17 .625 Silver Silver 9255005A331-000 B/19
6 2 2.21 1.04 .625 Silver Silver 9255015A331-000 B/19
12 3 .600 .254 .387 Silver Silver ( C) 9211050A911-001 ***
13 3 .600 .148 .319 Silver Silver ( C) 9211031A911-001 ***
12 4 .600 .254 .387 Silver Gold ( C) 9211050A331-000 ***
13 4 .600 .148 .319 Silver Gold ( C) 9211031A331-000 ***
• 7/16 connectors with 1" square flanges have lower maximum power rating than standard-flange connectors—contact factory for details.

7/16 Cable Jacks
Bulkhead Mounted Jacks - For Flexible & Semi-Rigid Cable
A
1.625 dia. B 1.265 dia.*
.187
1.215
C dia.
*Recommended
1.25-18 UNEF-2A thread mounting hole
.350 max. panel
Figure 1
(Crimp type for flexible cable)
1.625 dia. 1.12 1.265 dia.*

.187
B ( I.D. )
1.215
C dia. A
*Recommended
.350 max. panel
Figure 2
(Solder type for semi-rigid cable)

Figure Delta P/N
3, 4 1 2.34 1.17 .625 Silver Silver ( C ) 9219005A911-000 B/19
12 2 .470 .254 .387 Silver Silver ( C ) 9216050A911-000 ***
13 2 .600 .148 .319 Silver Silver ( C ) 9216031A911-000 ***

7/16 VersaCom Connectors
The Delta Versatile Combination Connector System
By purchasing VersaCom body assemblies and cable fittings, you can easily assemble straight or right angle connectors as needed—
eliminating separate stocks of complete connectors body styles and cable attachments
Same parts in right-

angle configuration.
Body assembly (plug type, Body assembly and clamp type cable fitting,
side and bottom views) combined in straight configuration
VersaCom Body Assemblies

.142 dia. typ. 1.79
ersaCom
.974
(CL )
typ.
1.68 1.79
1.25 sq. .85
Body Style Figure Body Plating Contact Plating Delta P/N
Plug 1 Silver Silver ( C ) 9203000A001-000
Jack 2 Silver Silver ( C ) 9208000A001-000
Panel Jack 3 Silver Silver ( C ) 9211000A911-001
Cable Fittings For VersaCom Connectors

C B hex
(crimp sleeve) B hex B hex
C hex
C C
B hex .100 .100 .100 (I.D. ) .100
A A A
A
Figure 1 Figure 2 Figure 3 Figure 4
(Crimp type for (Clamp type for flexible cable or (Clamp type for flexible cable or (Direct solder for
flexible cable) solder-clamp for semi-rigid cable) solder-clamp for semi-rigid cable) semi-rigid cable)

Group A B C Trim Code
2 1 .960 .500 .630 Silver 10-10676-01-AG B/31
2, 3 2 1.14 .750 .625 Silver 10-10681-01-AG A/35
3, 4 1 .960 .500 .630 Silver 10-10677-01-AG B/31
4 2 1.14 .750 .625 Silver 10-10682-01-AG A/35
5, 6 3 .630 .500 .437 Silver 10-10683-01-AG A/36
5 1 .830 .500 .500 Silver 10-10678-01-AG B/31
6 1 .830 .500 .500 Silver 10-10679-01-AG B/31
7 1 .830 .500 .500 Silver 10-10680-01-AG B/31
7 3 .630 .500 .437 Silver 10-10684-01-AG A/36
12 2 1.14 .750 .625 Silver 10-10685-01-AG ***
12 4 .630 .500 .254 Silver 10-10687-01-AG ***
13 3 .630 .500 .437 Silver 10-10686-01-AG ***
13 4 .630 .500 .143 Silver 10-10688-01-AG ***

7/16 Receptacles
Jack Receptacles - Solder Pot Contact
.142 B .125
dia. typ. B
C dia. dia. typ. C dia.
.974 .718
(CL )
typ. (CL ) typ.
D ( I.D. )
D ( I.D. )
1.00 .250
1.25 sq. .250 sq. A
A
Figure 1 Figure 2
(Standard flange) (1" square flange, interchangeable with
type N standard flange size)
.125 B
dia. typ. C dia.
Figure 3 .718
(1" square flange, interchangeable (CL ) typ.
with type N standard flange size) D ( I.D. )
1.00 .250
sq. A
.250
Delta PressMount These connectors eliminate the need C dia.
Receptacles for complicated mounting hole D
patterns and mounting hardware. ( I.D. )
Component housing
They are simply pressed into a single
through hole, and the precisely-
engineered knurled mounting section .250
provides retention strength greater
than normal mating and unmating
.692 B
Internal dia. over knurl A
Circuitry forces. An integral shoulder provides
a positive stop when mounting. Figure 4
(PressMount)

Figure Delta P/N
1 .850 .197 .274 .100 See above Silver Silver ( C) 9213000A911-003
2 1.17 .080 .120 .100 33 Silver Gold ( C) 9213000A911-004
3 2.17 .080 .120 .100 33 Silver Gold ( C) 9213000A911-010
4 1.42 .819 .120 .100 .688±.001 dia. Silver Gold ( C) 9220000A911-000
Panel Jack Receptacles - Threaded Contact

.142 B
dia. typ.
.974 M3 x
Figure 1 (CL ) C
0.5 6g
dia. thread
(Standard flange) typ.
1.25 sq. A

Figure Delta P/N
1 .850 .197 .630 See above Silver Silver ( C ) 9258000A911-000

7/16 Receptacles
Panel Jack Receptacles - Tab Contact
.142 B
dia. typ. .125 B
dia. typ.
.300
.974
(CL ) Tab D thick .718
x .275 wide
typ. (CL ) typ.
Tab D thick
.275 dia. x .120 wide
C
1.25 sq. C 1.00 sq. A
A
Figure 1 Figure 2
(Standard flange) (1" square flange, interchangeable

Figure Delta P/N
1 .850 .197 .200 .100 See above Silver Silver ( C ) 9258000A911-006
2 1.17 .080 .100 .005/.008 33 Silver Gold ( C ) 9258000A331-000
Panel Jack Receptacles - Slotted Contact

.142 B
dia. typ. C dia. .120 dia.
B
.974 D
(CL ) .718 slot width
typ. (CL ) typ.
D .125
slot width dia. typ.
1.00 sq.
C A
1.25 sq. .20 A
Figure 1 Figure 2
Figure Delta P/N
1 .850 .197 .276 .095 See above Silver Silver ( C ) 9258000A911-007
2 1.17 .080 .050 .013/.017 33 Silver Gold ( C ) 9258000A331-010
Panel Jack Receptacles - Post Contact
.400 dia. B
Figure 1 .120 dia.
(1" square flange, interchangeable .718
(CL ) typ.
.125
dia. typ.
1.00 sq. C
D A
Figure Delta P/N
1 1.17 .080 .325 .500 33 Silver Silver ( C) 9258000A331-005
1 1.17 .080 .000 .750 33 Silver Silver ( C) 9258000A331-002
1 1.17 .080 .000 .562 33 Silver Silver ( C) 9258000A331-003

7/16 Receptacles
Plug Receptacles - Solder Pot Contact
B
C dia. B
D C dia.
.974 ( I.D. )
D
(CL ) .718 ( I.D. )
typ. (CL ) typ.
.125
.142 dia. typ.
dia. typ.
.250
1.25 sq. .250 1.00 sq. A
A
Figure 1 Figure 2

These connectors eliminate the need for complicated mounting hole
patterns and mounting hardware.
They are simply pressed into a single through hole, and the precisely-
Internal engineered knurled mounting section provides retention strength greater
Circuitry than normal mating and unmating forces. An integral shoulder provides
a positive stop when mounting.
.250
C dia.
D
Figure 3 ( I.D. )
(PressMount)
.250
.692 B
dia. over knurl A

Figure Delta P/N
1 1.21 .197 .274 .100 See above Silver Silver ( C ) 9223000A911-000
2 1.40 .080 .120 .100 33 Silver Gold ( C ) 9223000A911-003
3 1.65 1.05 .120 .100 .688±.001 dia. Silver Gold ( C ) 9224000A911-000
Panel Plug Receptacles - Threaded Contact
B
C dia.
.974 M3 x 0.5
Figure 1 (CL ) 6g thread
(Standard flange) typ.
.142
dia. typ.
1.25 sq. A

Figure Delta P/N
1 1.21 .197 .630 See above Silver Silver ( C ) 9223000A911-001

7/16 Receptacles
Panel Plug Receptacles - Tab Contact
B
Tab D thick
Figure 1 x .120 wide
.718
(1" square flange, interchangeable (CL ) typ.
with type N standard flange size) .125
dia. typ.
C A
1.00 sq.

Figure Delta P/N
1 1.40 .080 .100 .005/.008 33 Silver Gold ( C ) 9259000A331-000
Panel Plug Receptacles - Slotted Contact
B
B
C dia. .120 dia.
.974 D D
(CL ) slot .718 slot
typ. width (CL ) typ. width
.142 .125
dia. typ.
dia. typ.
C
1.25 sq. .20 1.00 sq. A
A
Figure 1 Figure 2
Figure Delta P/N
2 1.40 .080 .050 .013/.017 33 Silver Gold ( C ) 9259000A331-006
Panel Plug Receptacles - Post Contact

.142 B
dia. .400 dia. B
typ.
.974 .120
(CL ) .718 dia.
typ. (CL ) typ.
C dia.
.125
dia. typ.
D C
1.25 sq. A 1.00 sq. D A
Figure 1 Figure 2

Figure Delta P/N
2 1.40 .080 .325 .500 33 Silver Silver ( C ) 9259000A331-007
2 1.40 .080 .000 .562 33 Silver Gold ( C ) 9259000A331-001

7/16 Adapters
Bulkhead Mounted Jack-Jack Adapter (Connects Two Plugs)
1.56
A B
1.625 dia. .187 1.265 dia.*
1.215
*Recommended
Figure 1

Figure Delta P/N
1 .440 .933 .350 See above Silver Silver ( C ) 9226000A911-001
7/16 To N Adapters
B B
A A
Figure 1 Figure 2
(7/16 jack–N jack) (7/16 plug–N jack)
A
.142 .197
dia. typ.
.974
(CL )
typ.
1.25 sq. .479 B

Figure 3
(7/16 jack–N jack, panel mounted)
Dimensions Plating
Figure Delta P/N
A B Body Contact
1 1.33 .937 Silver Gold ( C) 2228000A001-029
2 1.41 .875 Silver Gold ( C) 2234000A001-122
3 1.33 .850 Silver Silver ( C) 2225000A911-009

Adapter Finder
Adapters in this chart and on the following pages are listed in alphabetic order—to find an adapter
that connects a TNC plug to a BNC jack, look under “BNC plug to TNC jack.”
Left end: Right end: Delta P/N Page Left end: Right end: Delta P/N Page
7/16 Plug N Jack 2234000A001-122 175 G874 Any see pages 41-42
N Jack 2228000A001-029 175 N Jack 2228000N001-022 180
7/16 Jack
N Jack 2225000A911-009 175 HN Jack N Jack 2225000N401-000 180
C Plug UG-636A/U 177 N Plug UG-1108/U 180
HN Plug UG-309/U 177 N Jack 2234000N001-070 180
N Jack 2225000N331-006 177 HN Plug N Plug UG-1107/U 180
N Jack UG-606/U 177 TNC Plug 2234000N004-011 180
N Jack M55339/25-00606 177 LC Jack N Plug 2234000N000-078 180
N Jack M55339/01-00001 177 SC Jack 2228000N000-012 181
BNC Jack
N Plug UG-201A/U 177 SC Plug 2234000N000-055 181
N Plug M55339/20-00201 177 SMA Jack 2225000N331-005 181
SC Jack 2228000N000-009 177 SMA Jack 2226000N721-001 181
SC Plug 2234000N001-100 177 SMA Jack 2228000N00M-010 181
N Jack
TNC Jack 2234000N000-008 177 SMA Plug 2234000N331-003 181
TNC Plug 2234000N000-006 177 TNC Jack 2225000N331-008 181
UHF Plug UG-273/U 177 TNC Jack 2228000N001-002 181
C Jack UG-635/U 178 TNC Plug 2234000N001-009 181
HN Jack 2234000N001-010 178 UHF Plug UG-83B/U 181
HN Plug 2234000N004-010 178 SC Jack 2234000N000-065 182
N Jack UG-349B/U 178 SC Plug 2227000N000-003 182
N Jack M55339/49-00349 178 SMA Plug 2234000N00M-039 182
N Jack UG-335A/U 178 SMA Jack 2234000N001-004 182
BNC Plug N Plug
N Jack M55339/24-00335 178 TNC Jack 2234000N001-007 182
N Plug UG-1034/U 178 TNC Plug 2234000N000-012 182
N Plug M55339/18-01034 178 UHF Jack UG-146A/U 182
SC Plug 2227000N000-004 178 UHF Plug 2227000N000-016 182
TNC Jack 2234000N000-009 178 QDS series Any See page 96
TNC Plug 2234000N000-007 178 SMB Jack 2234000N001-078 183
UHF Jack UG-255A/U 178 SMB Plug 2228000N001-015 183
HN Plug 2234000N001-051 179 SMA Jack SMC Jack 2234000N001-121 183
N Plug UG-564/U 179 SMC Plug 2234000N001-077 183
C Jack
TNC Plug 2234000N000-010 179 TNC Jack 2225000K071-002 183
UHF Plug UG-637/U 179 SMB Jack 2234000N001-082 183
HN Jack UG-703A/U 179 SMB Plug 2234000N000-069 183
SMA Plug
C Plug N Jack UG-565A/U 179 SMC Jack 2234000N001-120 183
TNC Jack 2234000N000-011 179 SMC Plug 2234000N001-081 183

Adapters - BNC Jack To Other Series

(BNC jack-C plug) (BNC jack-HN plug) (BNC jack-N jack)
Figure 4 Figure 5
(BNC jack-N jack) (BNC jack-N jack)

(BNC jack-N plug) (BNC jack-SC jack) (BNC jack-SC plug)

(BNC jack-TNC jack) (BNC jack-TNC plug) (BNC jack-UHF plug)
Mounting Plating
Figure Adapter Ends Length Delta P/N
Figure Body Contact
1 BNC jack–C plug 1.23 None Nickel Silver ( C) UG-636A/U
2 BNC jack–HN plug 1.50 None Nickel Silver ( C) UG-309/U
3 BNC jack–N jack 1.13 None Silver Gold ( C) M55339/01-00001
4 BNC jack–N jack 1.39 33 Nickel Silver ( C) 2225000N331-006
5 BNC jack–N jack 1.75 72 Nickel Silver ( C) UG-606/U
5 BNC jack–N jack 1.75 72 Silver Gold ( C) M55339/25-00606
6 BNC jack–N plug 1.31 None Nickel Silver ( C) UG-201A/U
6 BNC jack–N plug 1.31 None Silver Gold ( C) M55339/20-00201
7 BNC jack–SC jack 1.23 None Nickel Gold ( C) 2228000N000-009
8 BNC jack–SC plug 1.45 None Nickel Silver ( C) 2234000N001-100
9 BNC jack–TNC jack 1.28 None Nickel Silver ( C) 2234000N000-008
10 BNC jack–TNC plug 1.23 None Nickel Gold ( C) 2234000N000-006
11 BNC jack–UHF plug 1.34 None Nickel Silver ( C) UG-273/U

Adapters - BNC Plug To Other Series

(BNC plug-C jack) (BNC plug-HN jack) (BNC plug-HN plug)
Figure 4 Figure 5
(BNC plug-N jack) (BNC plug-N jack)

(BNC plug-N plug) (BNC plug-SC plug) (BNC plug-TNC jack)
Figure 9 Figure 10
(BNC plug-TNC plug) (BNC plug-UHF jack)
Mounting Plating
Figure Body Contact
1 BNC plug–C jack 1.27 None Nickel Silver ( C) UG-635/U
2 BNC plug–HN jack 1.58 None Nickel Silver ( C) 2234000N001-010
3 BNC plug–HN plug 1.58 None Nickel Silver ( C) 2234000N004-010
4 BNC plug–N jack 1.47 None Nickel Silver ( C) UG-349B/U
4 BNC plug–N jack 1.47 None Silver Gold ( C) M55339/49-00349
5 BNC plug–N jack 1.47 33 Nickel Silver ( C) UG-335A/U
5 BNC plug–N jack 1.47 33 Silver Gold ( C) M55339/24-00335
6 BNC plug–N plug 1.48 None Nickel Silver ( C) UG-1034/U
6 BNC plug–N plug 1.48 None Silver Gold ( C) M55339/18-01034
7 BNC plug–SC plug 1.50 None Nickel Silver ( C) 2227000N000-004
8 BNC plug–TNC jack 1.25 None Nickel Gold ( C) 2234000N000-009
9 BNC plug–TNC plug 1.19 None Nickel Silver ( C) 2234000N000-007
10 BNC plug–UHF jack 1.33 None Nickel Silver ( C) UG-255A/U

Adapters - C Jack To Other Series
Figure 1 Figure 2
(C jack-HN plug) (C jack-N plug)
Figure 3 Figure 4
(C jack-TNC plug) (C jack-UHF plug)
Mounting Plating
Figure Body Contact
1 C jack–HN plug 1.50 None Nickel Silver ( C) 2234000N001-051
2 C jack–N plug 1.42 None Nickel Silver ( C) UG-564/U
3 C jack–TNC plug 1.23 None Nickel Silver ( C) 2234000N000-010
4 C jack–UHF plug 1.38 None Nickel Silver ( C) UG-637/U
Adapters - C Plug To Other Series

(C plug-HN jack) (C plug-N jack) (C plug-TNC jack)
Mounting Plating
Figure Body Contact
1 C plug–HN jack 1.46 None Nickel Silver ( C ) UG-703A/U
2 C plug–N jack 1.53 None Nickel Silver ( C ) UG-565A/U
3 C plug–TNC jack 1.23 None Nickel Silver ( C ) 2234000N000-011


Adapters - HN Jack To Other Series

(HN jack-N jack) (HN jack-N jack) (HN jack-N plug)
Mounting Plating
Figure Body Contact
1 HN jack–N jack 1.65 None Nickel Silver ( C) 2228000N001-022
2 HN jack–N jack 1.83 40 Nickel Silver ( C) 2225000N401-000
3 HN jack–N plug 1.56 None Nickel Silver ( C) UG-1108/U
Adapters - HN Plug To Other Series

(HN plug-N jack) (HN plug-N plug) (HN plug-TNC plug)
Mounting Plating
Figure Body Contact
1 HN plug–N jack 1.56 None Nickel Silver ( C) 2234000N001-070
2 HN plug–N plug 1.83 None Nickel Silver ( C) UG-1107/U
3 HN plug–TNC plug 1.56 None Nickel Silver ( C) 2234000N004-011
Adapters - LC Jack To Other Series
Figure 1
(LC jack-N plug)
Mounting Plating
Figure Body Contact
1 LC jack–N plug 2.39 None Nickel Silver ( C ) 2234000N000-078

Adapters - N Jack To Other Series

(N jack-SC jack) (N jack-SC plug) (N jack-SMA jack)
Figure 4 Figure 5
(N jack-SMA jack) (N jack-SMA jack)
Figure 6 Figure 7
(N jack-SMA plug) (N jack-TNC jack)

(N jack-TNC jack) (N jack-TNC plug) (N jack-UHF plug)
Mounting Plating
Figure Body Contact
1 N jack–SC jack 1.63 None Nickel Silver ( C) 2228000N000-012
2 N jack–SC plug 1.53 None Nickel Silver ( C) 2234000N000-055
3 N jack–SMA jack 1.24 None Nickel Gold ( C) 2228000N00M-010
4 N jack–SMA jack 1.26 72 Nickel Gold ( C) 2226000N721-001
5 N jack–SMA jack 1.24 33 Nickel Gold ( C) 2225000N331-005
6 N jack–SMA plug 1.28 33 Nickel Gold ( C) 2234000N331-003
7 N jack–TNC jack 1.39 33 Nickel Gold ( C) 2225000N331-008
8 N jack–TNC jack 1.39 None Nickel Gold ( C) 2228000N001-002
9 N jack–TNC plug 1.53 None Nickel Gold ( C) 2234000N001-009
10 N jack–UHF plug 1.56 None Nickel Silver ( C) UG-83B/U

Adapters - N Jack To Other Series
Figure 1 Figure 2
(N plug-SC jack) (N plug-SC plug)
Figure 3 Figure 4
(N plug-SMA jack) (N plug-SMA plug)
Figure 5 Figure 6
(N plug-TNC jack) (N plug-TNC plug)
Figure 7 Figure 8
(N plug-UHF jack) (N plug-UHF plug)
Mounting Plating
Figure Body Contact
1 N plug–SC jack 1.38 None Nickel Silver ( C) 2234000N000-065
2 N plug–SC plug 1.70 None Nickel Silver ( C) 2227000N000-003
3 N plug–SMA jack 1.23 None Nickel Gold ( C) 2234000N001-004
4 N plug–SMA plug 1.28 None Nickel Gold ( C) 2234000N00M-039
5 N plug–TNC jack 1.31 None Nickel Silver ( C) 2234000N001-007
6 N plug–TNC plug 1.44 None Nickel Silver ( C) 2234000N000-012
7 N plug–UHF jack 1.50 None Nickel Silver ( C) UG-146A/U
8 N plug–UHF plug 1.59 None Nickel Silver ( C) 2227000N000-016


Adapters - SMA Jack To Other Series

(SMA jack-SMB jack) (SMA jack-SMB plug) (SMA jack-SMC jack)
Figure 4 Figure 5
(SMA jack-SMC plug) (SMA jack-TNC jack)
Mounting Plating
Figure Body Contact
1 SMA jack–SMB jack .650 None Nickel Gold ( C) 2234000N001-078
2 SMA jack–SMB plug .640 None Nickel Gold ( C) 2228000N001-015
3 SMA jack–SMC jack .650 None Nickel Gold ( C) 2234000N001-121
4 SMA jack–SMC plug .690 None Nickel Gold ( C) 2234000N001-077
5 SMA jack–TNC jack 1.00 07 PSS* Gold ( C) 2225000K071-002
* Passivated stainless steel.
Adapters - SMA Plug To Other Series
Figure 1 Figure 2
(SMA plug-SMB jack) (SMA plug-SMB plug)
Figure 3 Figure 4
(SMA plug-SMC jack) (SMA plug-SMC plug)
Mounting Plating
Figure Body Contact
1 SMA plug–SMB jack .810 None Nickel Gold ( C) 2234000N001-082
2 SMA plug–SMB plug .880 None Nickel Gold ( C) 2234000N000-069
3 SMA plug–SMC jack .810 None Nickel Gold ( C) 2234000N001-120
4 SMA plug–SMC plug .820 None Nickel Gold ( C) 2234000N001-081

M39012 Cable Groups
M39012 Categories and Cable Groups
MIL-PRF-39012 QPL cable connectors are divided into categories which the characteristics of their cable assembly
method, and in some cases the actual assembly method:
Category A: Field-serviceable, with no special tools required for assembly. Our Category A connectors in series BNC, N, and
TNC are standard military-clamp types; Category A connectors in SMA series are solder type.
Category B: Special tools may be required for assembly. Our Category B connectors in N series are crimp types which use
standard, commercially-available crimp tools.
Category C: Crimp-type connectors which can be assembled with tools and die sizes.
Category D: Crimp-type connectors which can be assembled with tools and die sizes, and also have sizes for
crimp sleeves, contacts, and other parts. Category D connectors have crimpable center contacts.
MIL-PRF-39012 Cable Groups

Group Cables (M17/)
I 93-178,169-00001
IIA 113-RG316, 119-RG174, 173-00001, 172-00001, 196-00001
II
IIB 94-RG179
III 152-00001
IV 54-RG122, 157-00001, 187-00001, 198-00001
V 95-RG180
VIA 28-RG58, 111-RG303, 155-00001, 170-00001, 183-00001, 197-00001
VI
VIB 60-RG142, 84-RG223, 128-RG400, 158-00001, 167-00001, 175-00001, 194-00001, 200-00001
VIIA 29-RG58, 30-RG62, 90-RG71, 97-RG210, 110-RG302, 184-00001, 185-00001
VII
VIIB 90-RG71, 195-00001
VIII 2-RG6, 73-RG212, 112-RG304, 162-00001, 171-00001, 180-00001, 188-00001, 199-00001
XA 65-RG165, 74-RG213, 159-00001, 163-00001, 189-00001
XB 75-RG214, 86-00001, 127-RG393, 164-00001, 174-00001, 190-00001
X
XC 6-RG11, 62-RG144, 181-00001
XD 77-RG216, 191-00001
XI 74-RG215, 189-00002
XII 78-RG217, 165-00001, 192-00001
MIL-PRF-39012 Cable Group FInder

Cable Category Cable Category Cable Category Cable Category
M17/ A B, C, D M17/ A B, C, D M17/ A B, C, D M17/ A B, C, D
2-RG6 VIII VIII 90-RG71 VII VIIB 159-00001 X XA 185-00001 VII VIIA
6-RG11 X XC 93-RG178 I I 162-00001 VIII VIII 187-00001 IV IV
28-RG58 VI VIA 94-RG179 II IIB 163-00001 X XA 188-00001 VIII VIII
29-RG59 VII VIIA 95-RG180 V V 164-00001 X XB 189-00001 X XA
30-RG62 VII VIIA 97-RG210 VII VIIA 165-00001 XII XII 189-00002 XI —
54-RG122 IV IV 110-RG302 VII VIIA 167-00001 VI VIB 190-00001 X XB
60-RG142 VI VIB 111-RG303 VI VIA 169-00001 I I 191-00001 X XD
62-RG144 X XC 112-RG304 VIII VIII 170-00001 VI VIA 192-00001 XII XII
65-RG165 X XA 113-RG316 II IIA 171-00001 VIII VIII 194-00001 VI VIB
73-RG212 VIII VIII 119-RG174 II IIA 172-00001 II IIA 196-00001 II IIA
74-RG213 X XA 127-RG393 X XB 173-00001 II IIA 197-00001 VI VIA
74-RG215 XI — 128-RG400 VI VIB 174-00001 X XB 198-00001 IV IV
75-RG214 X XB 133-RG316 II IIA 175-00001 VI VIB 199-00001 VIII VIII
77-RG216 X XD 152-00001 III III 180-00001 VIII VIII 200-00001 VI VIB
78-RG217 XII XII 155-00001 VI VIA 181-00001 X XC
84-RG223 VI VIB 157-00001 IV IV 183-00001 VI VIA
86-00001 X XB 158-00001 VI VIB 184-00001 VII VIIA

M39012 Connectors - BNC
M39012/16 - BNC Straight Plug
B dia.
B dia.
B (Crimp Sleeve)
A A
A
M39012 P/N Category Figure
M39012/16-0013 C VIA 3 1.13 .500 Silver Gold ( C ) B / 19
M39012/16-0014 C VIB 3 1.13 .500 Silver Gold ( C ) B / 19
M39012/16-0015 C VIIA 3 1.10 .500 Silver Gold ( C ) B / 19
M39012/16-0016 C IV 3 1.13 .500 Silver Gold ( C ) B / 19
M39012/16-0017 C VIIB 3 1.13 .500 Silver Gold ( C ) B / 19
M39012/16-0101 A VI 1 1.06 .500 Silver Gold ( C ) A / 17
M39012/16-0102 A VII 1 1.06 .500 Silver Gold ( C ) A / 17
M39012/16-0103 A IV 1 1.06 .500 Silver Gold ( C ) A / 17
M39012/16-0111 A VI 1 1.06 .500 Silver Gold ( C ) A / 17
M39012/16-0118 A VII 1 1.06 .500 Silver Gold ( C ) A / 17
M39012/16-0220 A ll 1 1.06 .500 Silver Gold ( C ) A / 37
M39012/16-0222 A ll 3 .920 .307 Silver Gold ( C ) B / 19
M39012/16-0225 A X 2 1.66 .750 Silver Gold ( C ) A / 01
M39012/17 - BNC Straight Jack & M39012/18 - BNC Panel Jack

B dia. C dia. .120 max. panel
Figure 1 Figure 2 .688 .500

square typ.
A #3-56 UNF-2B B
A

M39012/17-0101 A VI 1 1.16 .500 Silver Gold ( C) A / 17
M39012/17-0102 A VII 1 1.16 .500 Silver Gold ( C) A / 17
M39012/17-0103 A IV 1 1.16 .500 Silver Gold ( C) A / 17

M39012/18-0101 A VII 2 1.16 .550 .500 Silver Gold ( C) A / 17
M39012/18-0102 A VI 2 1.16 .550 .500 Silver Gold ( C) A / 17
M39012/18-0103 A IV 2 1.16 .550 .500 Silver Gold ( C) A / 17
M39012/18-0220 A II 2 1.16 .550 .500 Silver Gold ( C) A / 38
See page 186 for cable groups and category • Assembly procedures start on page 205. • (C) indicates captive contact.

M39012/19 - BNC Bulkhead Jack
.24 max. panel
C dia.
.473 Mounting hole

Figure 1 dimensions
.505
dia.
B .687
A hex

M39012/20 - BNC Right Angle Plug

B
B
C A A
(crimp sleeve)
C dia.
Figure 1 Figure 2

M39012/20-0006 C VIA 1 1.07 1.63 .500 Silver Gold ( C ) B / 19
M39012/20-0007 C VIB 1 1.07 1.63 .500 Silver Gold ( C ) B / 19
M39012/20-0101 A VI 2 1.09 1.61 .500 Silver Gold ( C ) A / 17
M39012/20-0102 A VII 2 1.09 1.61 .500 Silver Gold ( C ) A / 17
M39012/20-0108 A VII 2 1.09 1.61 .500 Silver Gold ( C ) A / 17
M39012/21 - BNC Bulkhead Receptacle

C ( I.D. )
Mounting hole
dimensions D
E
dia. .500 B
dia. A
Figure 1
Dimensions Maximum Plating

M39012 P/N Figure
A B C D E Panel Body Contact
M39012/21-0001 1 1.06 .490 .062 .410 .442 .130 Silver Gold ( C)
M39012/21-0002 1 1.19 .470 .062 .348 .380 .260 Silver Gold ( C)
M39012/21-0003 1 1.19 .470 .062 .410 .442 .260 Silver Gold ( C)

M39012/22 - BNC Panel Receptacle
B
C ( I.D. )
.688 .500
Figure 1 square typ.
D
#3-56 UNF-2B A

M39012 P/N Figure
A B C D Panel Body Contact
M39012/22-0001 1 1.06 .63 .062 .090 .149 Silver Gold ( C )
M39012/24 - BNC Bulkhead Receptacle (Hermetically Sealed)

C ( I.D. )
Figure 1 .473 Mounting hole

(Rear mount) dimensions
.505
B D dia. dia.
A
C ( I.D. )
Figure 2 .362
(Frount Mount)
.407
dia. Mounting hole D dia. B
dimensions A

M39012 P/N Figure
M39012/24-0001 1 1.20 .83 .062 .687 2.60 Silver Gold ( C)
M39012/24-0002 2 1.20 .52 .062 .594 2.60 Silver Gold ( C)
M39012/25 - BNC Dust Caps

Figure 1 (Cap for BNC jack) Figure 2 (Cap for BNC jack)
B A B A
C ( I.D. ) C ( I.D. )
Figure 3 (Cap for BNC plug) Figure 4 (Cap for BNC plug)
B A B A
C ( I.D. ) C ( I.D. )
Dimensions Chain Plating

M39012 P/N Figure
A B C Type Body Contact
M39012/25-0006 1 .670 2.25 .144 Bead Silver —
M39012/25-0007 2 .670 2.70 .520 Safety Silver —
M39012/25-0008 3 .690 3.25 .281 Bead Silver —
M39012/25-0009 4 .690 3.25 .281 Safety Silver —
(C) indicates captive contact.

M55339 Adapters - BNC
M55339 - BNC Adapters Within Series
.275 max. panel
.473
.505 Mounting hole

B C dia. dia. dimensions
A
Figure 1 (Bulkhead mounted jack–jack, hermetically sealed)
A
Figure 2
(Right angle jack–plug)
B dia.
A A
Figure 3 (Straight plug–plug) Figure 4 (Straight jack–jack)
B
B B
A A
A
Figure 5 (Tee, jack–jack–plug) Figure 6 (Tee, jack–jack–jack) Figure 7 (Tee, jack–plug–jack)
Dimensions Plating
M55339 P/N Figure
A B C Body Contact
M55339/13-00492 1 1.53 .860 .690 Silver Gold ( C)
M55339/14-00306 2 1.06 .880 — Silver Gold ( C)
M55339/15-00491 3 1.22 — — Silver Gold ( C)
M55339/16-00914 4 1.28 .440 — Silver Gold ( C)
M55339/17-00001 5 1.50 1.06 — Silver Gold ( C)
M55339/17-00002 6 1.28 .970 — Silver Gold ( C)
M55339/17-00274 7 1.28 1.03 — Silver Gold ( C)

M39012 Connectors - N
M39012/01 - N Straight Plug
B dia. B dia.
Figure 1 Figure 2
A A
.033 dia.
Coupling nut lockwire holes (3)
Figure 3 detail
B
(crimp sleeve)
A

M39012/01-0005 A X 1 1.50 .750 Silver Gold ( C) A / 01
M39012/01-0015 A XII 1 1.80 .880 Silver Gold ( C) A / 01
M39012/01-0016 C VIII 3 2.00 .781 Silver Gold ( C) B / 03
M39012/01-0017 C XA 3 2.00 .781 Silver Gold ( C) B / 03
M39012/01-0018 C XB 3 2.00 .781 Silver Gold ( C) B / 03
M39012/01-0023 C XC 3 2.00 .781 Silver Gold ( C) B / 03
M39012/01-0024 C XD 3 1.55 .781 Silver Gold ( C) B / 03
M39012/01-0125 A XI 2 2.42 .750 Silver Gold ( C) Contact Factory
M39012/01-0501 D XB 3 1.55 .600 Silver Gold ( C) B / 03
M39012/01-0502 D XA 3 1.55 .600 Silver Gold ( C) B / 03
M39012/01-0503 D VIB 3 1.45 .500 Silver Gold ( C) B / 03
M39012/01B0007 B XA 3 1.55 .600 Silver Gold ( C) B / 03
M39012/01B0008 B XB 3 1.55 .600 Silver Gold ( C) B / 03
M39012/02 - N Straight Jack

B dia.
Figure 1 Figure 2
B
(crimp sleeve)
A A
B XB 2 1.64 .60 Silver Gold

M39012/02-0003 A X 1 1.67 .750 Silver Gold ( C ) A / 01
M39012/02-0101 A VIII 1 1.67 .750 Silver Gold ( C ) A / 01
M39012/02-0501 D XB 2 1.64 .600 Silver Gold ( C ) B / 03
M39012/02-0502 D XA 2 1.64 .600 Silver Gold ( C ) B / 03
M39012/02-0503 D VIB 2 1.54 .500 Silver Gold ( C ) B / 03
M39012/02B0008 B XA 2 1.64 .600 Silver Gold B / 10
M39012/02B0009 B XB 2 1.64 .600 Silver Gold B / 10
See next page for panel-mounted M39012/02 cable jacks.


M39012/02 - N Panel Jack
.218 max. panel .218 max. panel
B dia.
.718 1.00
typ. square
.66 B .66
(crimp sleeve)
A A .125 dia. typ.
Figure 1

M39012/02-0006 A X 1 1.67 .750 Silver Gold ( C) A / 01
M39012/02-0104 A VIII 1 1.67 .750 Silver Gold ( C) A / 01
M39012/02-0511 D XB 2 1.64 .600 Silver Gold ( C) B / 03
M39012/02-0512 D XA 2 1.64 .600 Silver Gold ( C) B / 03
M39012/02-0513 D VIB 2 1.54 .500 Silver Gold ( C) B / 03
M39012/03 - N Bulkhead Jack
.25 max. panel

C dia.
.630 Mounting hole

dia. dimensions
.536
B D dia.
A
Figure 1
.25 max. panel
.630 Mounting hole

dia. dimensions
C .536
(crimp sleeve)
B D dia.
A
Figure 2
Dimensions Plating Assembly

Cable Procedure/
Group A B C D Body Contact Trim code
M39012/03-0101 A VIII 1 1.75 .920 .750 .900 Silver Gold ( C) A / 01
M39012/03-0102 A XII 1 1.90 .920 .880 .875 Silver Gold ( C) A / 01
M39012/03-0501 D XB 2 1.84 .920 .600 .875 Silver Gold ( C) B / 03
M39012/03-0502 D XA 2 1.84 .920 .600 .875 Silver Gold ( C) B / 03
M39012/03-0503 D VIB 2 1.74 .920 .500 .875 Silver Gold ( C) B / 03
M39012/03B0004 B XA 2 1.84 .920 .600 .875 Silver Gold ( C) B / 03
M39012/03B0005 B XB 2 1.84 .920 .600 .875 Silver Gold ( C) B / 03

M39012/04 - N Receptacles
.536
C ( I.D. )
Figure 1 (Bulkhead jack, .630
hermetically sealed) dia.
Mounting hole
dimensions D dia. B
A
D
C ( I.D. )
Figure 2 (Panel jack) 1.00 .718

square typ.
B
.125 dia. typ. A

M39012 P/N Figure
M39012/04-0001 1 1.62 .707 .099 .812 .100 Silver Gold ( C )
M39012/04-0002 2 1.13 .660 .100 .080 .110 Silver Gold ( C )
M39012/05 - N Right Angle Plug

B
.033 dia.
Figure 1 Coupling nut lockwire holes (3)
detail
A
C dia.

M39012/05-0101 A X 1 1.36 1.66 .75 Silver Gold ( C ) A / 07
M39012/25 - N Dust Caps

Figure 1 (Cap for N jack) Figure 2 (Cap for N jack)
A A
B B
C ( I.D. ) C ( I.D. )

M39012 P/N Figure
M39012/25-0011 1 .56 2.50 .144 Bead Silver —
M39012/25-0012 2 .56 3.75 .635 Safety Silver —

M55339 Adapters - N
M55339 - N Adapters Within Series
.033 dia.
lockwire holes (3)
Figure 1
(Right angle jack–plug) B
Coupling nut detail
(For 1, 3, and 4)
.25 max. panel
.630 Mounting hole

dia. dimensions
.536
B C dia.
A
Figure 2 (Bulkhead mounted jack–jack, hermetically sealed)
B dia.
Figure 4 B
(Tee, jack–plug–jack)
A
Figure 3
(Straight plug–plug)
A
B dia.
B
Figure 5
(Tee, jack–jack–jack) A
Figure 6 (Straight jack–jack)
A
Dimensions Plating
M55339 P/N Figure
A B C Body Contact
M55339/03-00027 1 1.30 1.38 — Silver Gold ( C)
M55339/04-00030 2 1.54 .860 .875 Silver Gold ( C)
M55339/05-00057 3 1.59 — — Silver Gold ( C)
M55339/06-00001 4 1.75 1.47 — Silver Gold ( C)
M55339/06-00028 5 1.75 1.22 — Silver Gold ( C)
M55339/07-00029 6 1.75 .660 — Silver Gold ( C)

M39012 Connectors - SMA
M39012/25- SMA Dust Caps
B A B A
Figure 1 C ( I.D. ) Figure 2 C ( I.D. )
(Cap for (Cap for
SMA jack) SMA jack)
B A B A
Figure 3 C ( I.D. ) Figure 4 C ( I.D. )
(Cap for (Cap for
SMA plug) SMA plug)
M39012 P/N Figure
M39012/25-3024 1 .50 2.25 .144 Bead Passivated —
M39012/25-3025 2 .50 3.25 .281 Safety Passivated —
M39012/25-3026 3 .50 3.25 .144 Bead Passivated —
M39012/25-3027 4 .50 3.25 .281 Safety Passivated —
M39012/55 - SMA Straight Plug

.250 hex .312 hex .250 hex .312 hex
Outer sleeve (1) Outer sleeve (1)
Figure 2
Figure 1
(No lockwire holes)
B .020 dia. B
A lockwire holes (3) A
Outer sleeve (1) .312 hex Outer sleeve (1) .312 hex
Figure 4
Figure 3 (No lockwire holes)
B .020 dia.
B

M39012/55-3006 A I 1 .910 .670 Gold ( 2) Gold ( C) M / 01
M39012/55-3007 A II 1 .910 .670 Gold ( 2 ) Gold ( C) M / 01
M39012/55-3008 A IV 3 .940 .570 Gold ( 2 ) Gold ( C) K / 12
M39012/55-3009 A VI 3 .940 .570 Gold ( 2 ) Gold ( C) K / 12
M39012/55-3025 C I 1 .910 .670 Passivated Gold ( C) M / 01
M39012/55-3026 C IIA 1 .970 .670 Passivated Gold ( C) M / 01
M39012/55-3027 C IV 3 .940 .570 Passivated Gold ( C) K / 12
M39012/55-3028 C VIB 3 .950 .570 Passivated Gold ( C) K / 12
M39012/55-3029 C VIA 3 .970 .570 Passivated Gold ( C) K / 12
M39012/55-3030 A III 1 .910 .670 Gold ( 2 ) Gold ( C) M / 01
M39012/55-3106 A I 2 .910 .670 Gold ( 2 ) Gold ( C) M / 01
M39012/55-3107 A II 2 .910 .670 Gold ( 2 ) Gold ( C) M / 01
M39012/55-3108 A IV 4 .940 .570 Gold ( 2 ) Gold ( C) K / 12
M39012/55-3109 A VI 4 .940 .570 Gold ( 2 ) Gold ( C) K / 12
( 1) Category A: Solder sleeve with access hole as shown; Category C: Crimp sleeve without access hole.
( 2) Coupling nut is passivated; body tail is gold plated for soldering of cable braid.

M39012/55 - SMA Straight Plug - Continued
.250 hex .312 hex

Outer sleeve (1) .250 hex .312 hex
Outer sleeve (1)
Figure 1 Figure 2
(No lockwire holes)
B .020 dia.
A lockwire holes (3) B
A
.312 hex
Outer sleeve (1) Outer sleeve (1) .312 hex
Figure 4
Figure 3 (No lockwire holes)
B .020 dia.
B

M39012 P/N Category Figure Body Contact
Group A B Trim Code
M39012/55-4006 A I 1 1.25 .670 Gold ( 3) Gold ( C) M/01
M39012/55-4007 A II 1 1.25 .670 Gold ( 3) Gold ( C) M/01
M39012/55-4008 A IV 1 1.25 .670 Gold ( 3) Gold ( C) K/12
M39012/55-4009 A VI 3 .940 .568 Gold ( 3) Gold ( C) K/12
M39012/55-4030 A III 3 .940 .568 Gold ( 3) Gold ( C) M/01
M39012/55-4106 A I 2 1.25 .670 Gold ( 3) Gold ( C) M/01
M39012/55-4107 A II 2 1.25 .670 Gold ( 3) Gold ( C) M/01
M39012/55-4108 A IV 4 .940 .568 Gold ( 3)
Gold ( C) K/12
M39012/55-4109 A VI 4 .940 .568 Gold ( 3) Gold ( C) K/12
M39012/55-4130 A III 4 .940 .568 Gold ( 3) Gold ( C) M/01
(1) Category A: Solder sleeve with access hole as shown; Category C: Crimp sleeve without access hole.
(2) Coupling nut is passivated; body tail is gold plated for soldering of cable braid.
(3) All material is Beryllium Copper and Gold Plated.
•Assembly procedures start on page 205.

•See page 186 for cable groups and categories.

M39012/56- SMA Right Angle Plug
.68 .312 hex .68 .312 hex
.54 .54
.020 dia.
lockwire holes (3)
A A
B B Figure 2
Figure 1
Outer Outer (No lockwire holes)
sleeve(1) sleeve(1)

M39012/56-3006 A I 1 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3007 A II 1 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3008 A IV 1 .760 .630 Gold ( 2) Gold ( C) L / 01
M39012/56-3009 A VI 1 .760 .630 Gold ( 2) Gold ( C) L / 01
M39012/56-3025 C I 1 .680 .550 Passivated Gold ( C) L / 06
M39012/56-3026 C IIA 1 .740 .610 Passivated Gold ( C) L / 06
M39012/56-3027 C IV 1 .680 .550 Passivated Gold ( C) L / 06
M39012/56-3028 C VIB 1 .690 .560 Passivated Gold ( C) L / 06
M39012/56-3029 C VIA 1 .710 .580 Passivated Gold ( C) L / 06
M39012/56-3030 A III 1 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3106 A I 2 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3107 A II 2 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3108 A IV 2 .760 .630 Gold ( 2) Gold ( C) L / 01
M39012/56-3109 A VI 2 .760 .630 Gold ( 2) Gold ( C) L / 01
M39012/56-3125 C I 2 .680 .550 Passivated Gold ( C) L / 06
M39012/56-3126 C IIA 2 .740 .610 Passivated Gold ( C) L / 06
M39012/56-3127 C IV 2 .680 .550 Passivated Gold ( C) L / 06
M39012/56-3128 C VIB 2 .690 .560 Passivated Gold ( C) L / 06
M39012/56-3129 C VIA 2 .710 .580 Passivated Gold ( C) L / 06
M39012/56-3130 A III 2 .680 .550 Gold ( 2) Gold ( C) L / 06
M39012/56-3502 D XA 1 1.13 1.01 Passivated Gold ( C) B /40
M39012/56-3602 D XA 2 1.13 1.01 Gold ( 3) Gold ( C) B /40
M39012/56-4502 D XA 1 1.13 1.01 Passivated Gold ( C) B /40
M39012/56-4602 D XA 2 1.13 1.01 Gold ( 3) Gold ( C) B /40
( 1) ( 2) (3) See page 12 for notes.
M39012/57 - SMA Straight Jack

.250 hex
Outer Outer
sleeve(1) sleeve(1)
Figure 1 A B .312 hex Figure 2 A B .312 hex

M39012/57-3006 A I 1 .870 .630 Gold ( 2 ) Gold ( C) M / 01
M39012/57-3007 A II 1 .870 .630 Gold ( 2 ) Gold ( C) M / 01
M39012/57-3008 A IV 2 .900 .530 Gold Gold ( C) K / 12
M39012/57-3009 A VI 2 .900 .530 Gold Gold ( C) K / 12
M39012/57-4007 A II 1 .960 .630 Gold ( 3 ) Gold ( C) M / 01
(1) (2) (3) See page 196 for notes. • See page 186 for cable groups and category • Assembly procedures start on page 205. •(C) indicates captive contact.

M39012/58 - SMA Panel Jack
.250 hex .325 .325
.500 .340 .500 .340

Outer sq. typ. Outer sq. typ.
sleeve(1) sleeve(1)
.065 .065
Figure 1 Figure 2
B .102 dia. typ. B .102 dia. typ.
A A
M39012/58-3006 A I 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/58-3007 A II 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/58-3008 A IV 2 .900 .530 Gold Gold ( C) K / 12
M39012/58-3009 A VI 2 .900 .530 Gold Gold ( C) K / 12
M39012/58-3030 A III 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/59 - SMA Bulkhead Jack

.103 max. panel
.250 hex
.500 .281 dia.

Figure 1 Outer dia.
sleeve(1) Mounting hole
dimensions
.411 .266
B
A
.103 max. panel
.500 .281 dia.

Figure 2 Outer dia.
sleeve(1) Mounting hole
dimensions
.411 .266
B
A
M39012/59-3006 A I 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/59-3007 A II 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/59-3008 A IV 2 .900 .530 Gold Gold ( C) K / 12
M39012/59-3009 A VI 2 .900 .530 Gold Gold ( C) K / 12
M39012/59-3030 A III 1 .870 .630 Gold ( 2) Gold ( C) M / 01
M39012/59-4009 A IV 2 .960 .530 Gold ( 3) Gold ( C) K / 12
( 1) Category A: Solder sleeve with access hole as shown; Category C: Crimp sleeve without access hole.
( 2) Mating thread area is passivated; body tail is gold plated for soldering of cable braid.
( 3) All Material is Beryllium Copper and Gold plated.

M39012/60 - SMA Panel Jack Receptacle
.58
C .065
dia. typ.
B (CL ) typ.
.032
( I.D. ) .050
dia.
A .375
square
Figure 1
.58
C
dia. typ. .065
.032
A B (CL ) ( I.D. )
.050 dia.
.223 .375
Figure 2
Dimensions Plating
M39012 P/N Figure
A B C Body Contact
M39012/60-3001 1 .500 .340 .102 Passivated Gold ( C )
M39012/60-3002 2 .625 .481 .102 Passivated Gold ( C )
M39012/61 - SMA Bulkhead Jack Receptacle
C
.032
( I.D. )
.500 .281 dia.
dia.
.050 dia. Mounting hole
dimensions
.162 dia. B .266
A
Figure 1 (Rear mount)
.050 dia.
Mounting hole
.281 dia. .500
dimensions dia.
.032
.266 ( I.D. )
B
A
Figure 2 (Front mount)

M39012 P/N Figure
A B C Panel Body Contact
M39012/61-3001 1 .690 .415 .062 .103 Passivated Gold ( C)
M39012/61-3002 2 .690 .310 — .103 Passivated Gold ( C)

M39012 Connectors - TNC
M39012/25 - TNC Dust Caps
Figure 1 (Cap for TNC plug) Figure 2 (Cap for TNC plug)
B A B A
C ( I.D. ) C ( I.D. )
Figure 3 (Cap for TNC jack) Figure 4 (Cap for TNC jack)
B A B A
C ( I.D. ) C ( I.D. )

M39012 P/N Figure
M39012/25-0018 1 .680 3.25 .281 Bead Silver —
M39012/25-0019 2 .680 3.25 .281 Safety Silver —
M39012/25-0020 3 .700 2.25 .144 Bead Silver —
M39012/25-0021 4 .700 2.70 .515 Safety Silver —
M39012/26 - TNC Straight Plug
B (crimp sleeve) B dia.
.027 dia.
lockwire holes (3)
A A Coupling nut
Figure 1 Figure 2 detail

M39012/26-0010 C VIA 1 1.10 .500 Silver Gold ( C) B / 19
M39012/26-0011 C VIB 1 1.10 .500 Silver Gold ( C) B / 19
M39012/26-0012 C VIIA 1 1.10 .500 Silver Gold ( C) B / 19
M39012/26-0013 C IV 1 1.10 .500 Silver Gold ( C) B / 19
M39012/26-0014 C VIIB 1 1.10 .500 Silver Gold ( C) B / 19
M39012/26-0018 A II 2 1.06 .500 Silver Gold ( C) A / 17
M39012/26-0022 C IIA 1 1.04 .440 Silver Gold ( C) Contact Factory
M39012/26-0023 C V 1 1.10 .500 Silver Gold ( C) B / 19

M39012/27 - TNC Straight Jack
B B dia.
(crimp sleeve)
A A
Figure 1 Figure 2

M39012/27-0010 C VIA 1 1.19 .500 Silver Gold (C ) B / 19
M39012/28 - TNC Bulkhead Jack

.16 max. panel
C dia. .16 max. panel
.473
.505
C dia.
(crimp sleeve)
B .687 B .687
A hex A hex Mounting hole
dimensions
Figure 1 Figure 2

M39012/28-0010 C VIA 1 1.43 .810 .500 Silver Gold ( C) B / 19
M39012/28-0011 C VIB 1 1.43 .810 .500 Silver Gold ( C) B / 19
M39012/28-0012 C VIIA 1 1.43 .810 .500 Silver Gold ( C) B / 19
M39012/28-0013 C IV 1 1.43 .810 .500 Silver Gold ( C) B / 19
M39012/28-0014 C VIIB 1 1.43 .810 .500 Silver Gold ( C) B / 19
M39012/28-0022 C IIA 1 1.37 .810 .440 Silver Gold ( C) Contact Factory
M39012/28-0023 C V 1 1.43 .810 .500 Silver Gold ( C) B / 19

M39012/29 - TNC Panel Jack
.125 max. panel .125 max. panel

B dia.
.090
.500 .688
typ. square
B
(crimp sleeve) .090
.55 .55 #3-56 UNF-2B
A A
Figure 1 Figure 2 Flange dimensions

M39012/29-0010 C VIA 1 1.17 .500 Silver Gold (C ) B / 19
M39012/31 - TNC Bulkhead Receptacle
C ( I.D. )
Mounting hole
dimensions D
E
dia. .500 B
dia. A
Figure 1

M39012 P/N Figure
A B C D E Panel Body Contact
M39012/31-0001 1 1.06 .470 .062 .410 .442 .130 Silver Gold ( C )
M39012/31-0002 1 1.19 .470 .062 .348 .380 .250 Silver Gold ( C )

M39012/32 - TN C Panel Receptacle
B
C ( I.D. )
.688 .500
square typ.
D
#3-56 UNF-2B A
Figure 1

M39012 P/N Figure
M39012/32-0001 1 1.06 .630 .062 .090 .125 Silver Gold ( C )
M39012/34 - TNC Bulkhead Receptacle (Hermetically Sealed)
C ( I.D. )
.473 Mounting hole

dimensions
.505
B D dia. dia.
A
Figure 1
(Rear mount)
C ( I.D. )
.362
.407
dia. Mounting hole D dia. B
dimensions A
Figure 2
(Frount Mount)

M39012 P/N Figure
M39012/34-0001 1 1.20 .830 .062 .687 .250 Silver Gold ( C)
M39012/34-0002 2 1.20 .520 .062 .594 .250 Silver Gold ( C)

M55339 Adapters Between Series
M55339 - Adapters Between Series
B
dia.
C A
A
Figure 1 (BNC jack—N jack) Figure 2 (BNC plug—N plug)
.718 1.00
typ. square
A B .125 dia. typ.

A
Figure 3 (BNC jack—N plug)
Figure 4
(BNC plug—N jack, panel mounted)
.30 max. panel
Mounting hole .630

dimensions dia.
.536 C dia. B
A
Figure 5
(BNC jack—N jack, bulkhead mounted, pressurized)
B dia.
A
Figure 6 (BNC plug—N jack)
Dimensions Plating
M55339 P/N Figure
A B C Body Contact
M55339/01-00001 1 1.13 .75 .625 Silver Gold ( C)
M55339/18-01034 2 1.48 — — Silver Gold ( C)
M55339/20-00201 3 1.31 — — Silver Gold ( C)
M55339/24-00335 4 1.47 .736 .080 Silver Gold ( C)
M55339/25-00606 5 1.75 1.026 .812 Silver Gold ( C)
M55339/49-00349 6 1.47 .625 — Silver Gold ( C)

M39012 Assembly Procedures
Assembly Procedure A
Cable Trim Codes 1) Trim cable jacket to dimension A. Backnut
Washer
(if supplied) Washer and/or bushing
Code A B C Slide backnut, washer, V-gasket, (if supplied) Contact
A/01 .375 .047 .203 and braid clamp onto cable as
A/07 .375 .047 .125 shown. Cable jacket should
A/17 .375 .109 .125 bottom on step inside braid Insulator
A
A/37 .281 .038 .188 clamp. V-Gasket
Braid Clamp
A/38 .281 .069 .156
Fold braid over
C
2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should
not overlap after folding). Trim braid wires with step of braid clamp. Trim cable dielectric and
center conductor to dimensions B and C.
B
Solder
3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear
bushing or washer (if supplied), rear insulator, and contact, and solder contact to center conductor.
Rear of contact should be with cable dielectric end.
Washer or bushing (if supplied)
4) Insert prepared cable and hardware into body and tighten backnut.
Assembly Procedure B
Cable Trim Codes Crimp Sleeve
Code A B C Contact
1) Trim cable per chart. Slide crimp
B/03 .406 .500 .187
sleeve back onto cable.
B/10 .280 .436 .187 A
B/19 .343 .437 .156 B C
B/40 .281 .390 .140
2) If support insulator is provided for RG-62 or 71 cable, insert into hollow in
dielectric. Solder or crimp contact onto center conductor; back of contact
with trimmed end of cable dielectric. Flare cut end of braid slightly by
rotating dielectric. Solder
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push
cable in until contact snaps into insulator. Slide crimp sleeve forward until with body
and crimp (see page 20 for hex die sizes).
Assembly Procedure K
Crimp or solder sleeve
Cable Trim Codes
1) Trim cable per chart. Slide crimp (or
Code A B C
solder) sleeve onto cable.
K/12 .281 .390 .140 Solder hole A
(for solder-type connectors) B C
Solder
2) Solder contact onto center conductor, to maintain gap as shown. Flare cut end
of braid slightly by rotating dielectric.
.015"
Cable dielectric end
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push
Plug body assembly and
cable in until cable dielectric bottoms in connector. Slide crimp sleeve forward until contact shown;
with body and crimp (see page 20 for hex die sizes). (For solder-type connectors, solder procedure is identical
for jack connectors.
braid to body and sleeve through hole in sleeve.)

M39012 Assembly Procedures
Assembly Procedure L
Cable Trim Codes
Code A B C 1) Trim cable per chart. Slide crimp
L/01 .250 .438 .109 (or solder) sleeve onto cable.
L/06 .281 .390 .070 A
Solder hole
Press cap in
until seated
2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push
Cap
cable in until end of braid touches connector body shoulder and center conductor
Insulator
rests in contact slot. (if supplied)
Slide crimp sleeve forward until with body and crimp (see page 20 for hex Solder center
die sizes). (For solder-type connectors, solder braid to body and sleeve through conductor to
Crimp or solder sleeve contact
hole in sleeve.)
Solder center conductor into contact slot, assemble insulator disc (if supplied),
then press cap into body until seated or screw into place.
Assembly Procedure M
Backnut
Cable Trim Codes 1) Trim cable per chart. Crimp or solder sleeve Clamp Contact
Code A B C Slide crimp (or solder)
M/01 .281 .390 .140 sleeve and backnut
onto cable. A Insulator
Solder hole
(for solder-type connectors)
B C
2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all
braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is with front
of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor,
Solder
with contact shoulder with front of insulator. Solder contact to center conductor.
3) Slide crimp sleeve forward until with clamp shoulder; crimp as close to shoulder as
possible. (see page 20 for hex die sizes). (For solder-type connectors, solder braid to body
and sleeve through hole in sleeve.)
4) Insert prepared cable into back of body. Slide nut forward and tighten to 8-10 inch-pounds.
Crimp Tools for Flexible Cable

Frame only—P/N M22520/5-01 —Use with interchangeable dies listed below.
Hex Die Size Die Set P/N Closure
M22520/5-01
.429 hex, .400 wide M22520/5-61 A
.213 hex, .400 wide M22520/5-19 B
.255 hex, .400 wide M22520/5-19 A
.128 hex, .400 wide M22520/5-35 B
.151 hex, .400 wide M22520/5-37 B
.105 hex, .400 wide M22520/5-33 B

M39012 & M55339 Index
Part Number Page Part Number Page Part Number Page Part Number Page Part Number Page
M39012/01-0005 . . . . 191 M39012/17-0103 . . . . 187 M39012/27-0010 . . . 201 M39012/55-3125 . . . 195 M39012/58-3006 . . . 198
M39012/01-0015 . . . . 191 M39012/17-0111 . . . . 187 M39012/27-0011 . . . 201 M39012/55-3126 . . . 195 M39012/58-3007 . . . 198
M39012/01-0016 . . . . 191 M39012/17-0118 . . . . 187 M39012/27-0012 . . . 201 M39012/55-3127 . . . 195 M39012/58-3008 . . . 198
M39012/01-0017 . . . . 191 M39012/18-0101 . . . . 187 M39012/27-0013 . . . 201 M39012/55-3128 . . . 195 M39012/58-3009 . . . 198
M39012/01-0018 . . . . 191 M39012/18-0102 . . . . 187 M39012/27-0014 . . . 201 M39012/55-3129 . . . 195 M39012/58-3025 . . . 198
M39012/01-0023 . . . . 191 M39012/18-0103 . . . . 187 M39012/27-0018 . . . 201 M39012/55-3130 . . . 195 M39012/58-3026 . . . 198
M39012/01-0024 . . . . 191 M39012/18-0111 . . . . 187 M39012/27-0022 . . . 201 M39012/55-4006 . . . 196 M39012/58-3027 . . . 198
M39012/01-0125 . . . . 191 M39012/18-0118 . . . . 187 M39012/27-0023 . . . 201 M39012/55-4007 . . . 196 M39012/58-3028 . . . 198
M39012/01-0501 . . . . 191 M39012/18-0220 . . . . 187 M39012/27-0101 . . . 201 M39012/55-4008 . . . 196 M39012/58-3029 . . . 198
M39012/01-0502 . . . . 191 M39012/19-0101 . . . . 188 M39012/27-0102 . . . 201 M39012/55-4009 . . . 196 M39012/58-3030 . . . 198
M39012/01-0503 . . . . 191 M39012/19-0102 . . . . 188 M39012/27-0103 . . . 201 M39012/55-4030 . . . 196 M39012/59-3006 . . . 198
M39012/01B0007 . . . . 191 M39012/19-0110 . . . . 188 M39012/28-0010 . . . 201 M39012/55-4106 . . . 196 M39012/59-3007 . . . 198
M39012/01B0008 . . . . 191 M39012/19-0111 . . . . 188 M39012/28-0011 . . . 201 M39012/55-4107 . . . 196 M39012/59-3008 . . . 198
M39012/02-0003 . . . . 191 M39012/19-0118 . . . . 188 M39012/28-0012 . . . 201 M39012/55-4108 . . . 196 M39012/59-3009 . . . 198
M39012/02-0006 . . . . 192 M39012/19-0220 . . . . 188 M39012/28-0013 . . . 201 M39012/55-4109 . . . 196 M39012/59-3025 . . . 198
M39012/02-0101 . . . . 191 M39012/20-0006 . . . . 188 M39012/28-0014 . . . 201 M39012/55-4130 . . . 196 M39012/59-3026 . . . 198
M39012/02-0104 . . . . 192 M39012/20-0007 . . . . 188 M39012/28-0018 . . . 201 M39012/56-3006 . . . 197 M39012/59-3027 . . . 198
M39012/02-0501 . . . . 191 M39012/20-0101 . . . . 188 M39012/28-0022 . . . 201 M39012/56-3007 . . . 197 M39012/59-3028 . . . 198
M39012/02-0502 . . . . 191 M39012/20-0102 . . . . 188 M39012/28-0023 . . . 201 M39012/56-3008 . . . 197 M39012/59-3029 . . . 198
M39012/02-0503 . . . . 191 M39012/20-0108 . . . . 188 M39012/28-0101 . . . 201 M39012/56-3009 . . . 197 M39012/59-3030 . . . 198
M39012/02-0511 . . . . 192 M39012/21-0001 . . . . 188 M39012/28-0102 . . . 201 M39012/56-3025 . . . 197 M39012/59-4009 . . . 198
M39012/02-0512 . . . . 192 M39012/21-0002 . . . . 188 M39012/28-0103 . . . 201 M39012/56-3026 . . . 197 M39012/60-3001 . . . 199
M39012/02-0513 . . . . 192 M39012/21-0003 . . . . 188 M39012/29-0010 . . . 202 M39012/56-3027 . . . 197 M39012/60-3002 . . . 199
M39012/02B0008 . . . . 191 M39012/22-0001 . . . . 189 M39012/29-0011 . . . 202 M39012/56-3028 . . . 197 M39012/61-3001 . . . 199
M39012/02B0009 . . . . 191 M39012/24-0001 . . . . 189 M39012/29-0012 . . . 202 M39012/56-3029 . . . 197 M39012/61-3002 . . . 199
M39012/03-0101 . . . . 192 M39012/24-0002 . . . . 189 M39012/29-0013 . . . 202 M39012/56-3030 . . . 197 M55339/01-00001 . . 204
M39012/03-0102 . . . . 192 M39012/25-0006 . . . . 189 M39012/29-0014 . . . 202 M39012/56-3106 . . . 197 M55339/03-00027 . . 194
M39012/03-0501 . . . . 192 M39012/25-0007 . . . . 189 M39012/29-0018 . . . 202 M39012/56-3107 . . . 197 M55339/04-00030 . . 194
M39012/03-0502 . . . . 192 M39012/25-0008 . . . . 189 M39012/29-0022 . . . 202 M39012/56-3108 . . . 197 M55339/05-00057 . . 194
M39012/03-0503 . . . . 192 M39012/25-0009 . . . . 189 M39012/29-0023 . . . 202 M39012/56-3109 . . . 197 M55339/06-00001 . . 194
M39012/03B0004 . . . . 192 M39012/25-0011 . . . . 193 M39012/29-0101 . . . 202 M39012/56-3125 . . . 197 M55339/06-00028 . . 194
M39012/03B0005 . . . . 192 M39012/25-0012 . . . . 193 M39012/29-0102 . . . 202 M39012/56-3126 . . . 197 M55339/07-00029 . . 194
M39012/04-0001 . . . . 193 M39012/25-0018 . . . . 200 M39012/29-0103 . . . 202 M39012/56-3127 . . . 197 M55339/13-00492 . . 190
M39012/04-0002 . . . . 193 M39012/25-0019 . . . . 200 M39012/31-0001 . . . 202 M39012/56-3128 . . . 197 M55339/14-00306 . . 190
M39012/05-0101 . . . . 193 M39012/25-0020 . . . . 200 M39012/31-0002 . . . 202 M39012/56-3129 . . . 197 M55339/15-00491 . . 190
M39012/16-0013 . . . . 187 M39012/25-0021 . . . . 200 M39012/32-0001 . . . 203 M39012/56-3130 . . . 197 M55339/16-00914 . . 190
M39012/16-0014 . . . . 187 M39012/25-3024 . . . . 195 M39012/34-0001 . . . 203 M39012/56-3502 . . . 197 M55339/17-00001 . . 190
M39012/16-0015 . . . . 187 M39012/25-3025 . . . . 195 M39012/34-0002 . . . 203 M39012/56-3602 . . . 197 M55339/17-00002 . . 190
M39012/16-0016 . . . . 187 M39012/25-3026 . . . . 195 M39012/55-3006 . . . 195 M39012/56-4502 . . . 197 M55339/17-00274 . . 190
M39012/16-0017 . . . . 187 M39012/25-3027 . . . . 195 M39012/55-3007 . . . 195 M39012/56-4602 . . . 197 M55339/18-01034 . . 204
M39012/16-0101 . . . . 187 M39012/26-0010 . . . . 200 M39012/55-3008 . . . 195 M39012/57-3006 . . . 197 M55339/20-00201 . . 204
M39012/16-0102 . . . . 187 M39012/26-0011 . . . . 200 M39012/55-3009 . . . 195 M39012/57-3007 . . . 197 M55339/24-00335 . . 204
M39012/16-0103 . . . . 187 M39012/26-0012 . . . . 200 M39012/55-3025 . . . 195 M39012/57-3008 . . . 197 M55339/25-00606 . . 204
M39012/16-0111 . . . . 187 M39012/26-0013 . . . . 200 M39012/55-3026 . . . 195 M39012/57-3009 . . . 197 M55339/49-00349 . . 204
M39012/16-0118 . . . . 187 M39012/26-0014 . . . . 200 M39012/55-3027 . . . 195 M39012/57-3025 . . . 197
M39012/16-0220 . . . . 187 M39012/26-0018 . . . . 200 M39012/55-3028 . . . 195 M39012/57-3026 . . . 197
M39012/16-0222 . . . . 187 M39012/26-0022 . . . . 200 M39012/55-3029 . . . 195 M39012/57-3027 . . . 197
M39012/16-0225 . . . . 187 M39012/26-0023 . . . . 200 M39012/55-3030 . . . 195 M39012/57-3028 . . . 197
M39012/17-0101 . . . . 187 M39012/26-0101 . . . . 200 M39012/55-3106 . . . 195 M39012/57-3029 . . . 197
M39012/17-0102 . . . . 187 M39012/26-0102 . . . . 200 M39012/55-3107 . . . 195 M39012/57-3030 . . . 197
M39012/26-0103 . . . . 200 M39012/55-3108 . . . 195 M39012/57-4007 . . . 197
M39012/55-3109 . . . 195
Other Military Part numbers: We still manufacture a broad line of older CW-, MX-, and UG- connectors, as listed below—
for given UG numbers we can provide all letter variations (A/U, B/U, etc.).
CW-123/U UG-83/U UG-244/U UG-423/U UG-568/U UG-633/U UG-912/U UG-997/U UG-1148/U
MX-554/U UG-95/U UG-260/U UG-491/U UG-572/U UG-637/U UG-926/U UG-1033/U UG-1187/U
UG-18/U UG-146/U UG-273/U UG-495/U UG-593/U UG-680/U UG-932/U UG-1056/U UG-1320/U
UF-29/U UG-202/U UG-349/U UG-557/U UG-626/U UG-706/U UG-945/U UG-1109/U UG-1464/U

Mounting Figures
Connector Flanges Panel Cutouts P.C. Board Drilling
(Panel Mounted Connectors) (Bulkhead Mounted Connectors)
A dia. typ.
C dia. typ.
D
dia.
A dia.
B
(CL ) typ.
B C (CL ) typ.
B (CL ) typ.
A D-Hole
square (PCB traces are shown for illustrative purpose only,
Figure A B and are not representative of actual circuitry.)
51 .755 .723
4-hole flanges 54 .630 .598
Coaxial connectors
Figure A B C 55 .630 .583 Figure A B C D
04 1/2 .360 .089 57 .557 .531 PCB01 .067 .400 .200 .045
05 1/2 .340 .102 59 .505 .473 PCB02 .045 .500 .250 .045
07 11 / 16 .500 #3-56 tap 62 .442 .410 PCB03 .067 .300 .150 .035
08 11 / 16 .500 .136 63 .407 .362 PCB05 .067 .200 .100 .055
09 11 / 16 .500 .125 65 .380 .348 PCB06 .067 .200 .100 .045
10 11 / 16 .500 .120 66 .319 .292 PCB07 .045 .177 .088 .045
12 11 / 16 .500 .109 67 .255 .236 PCB08 .032 .100 .050 .032
18 3/4 .531 .136 68 .195 .176
A dia. typ.
26 1 .718 #6-32 tap
.0625 typ.
27 1 .718 #4-40 tap
30 1 .718 .166
D
32 1 .718 .136 A dia. dia.
typ.
32A 1 .718 .136*
33 1 .718 .125
34 1 3 / 32 .812 .150 B
36 1 3 / 16 .906 #6-32 tap B (CL ) typ.
39 1 3 / 16 .906 .152 Double D-Hole .125 (CL )
40 1 3 / 16 .906 .125 C (CL ) typ.
Figure A B
45 2 1.437 .257 69 .755 .692 (PCB traces are shown for illustrative purpose only,
and are not representative of actual circuitry.)
91 .375 .250 .067 72 .630 .536
91A .375 .232 .093 75 .380 .341 Twinax Connectors
* Countersunk to .245 dia.
84 .319 .278 Figure A B C D
PCB04 .045 .500 .250 .045
D
dia. typ.
A dia.
C B (CL )
A Round Hole
Figure A
82 .255
2-hole flanges
89 .380
Figure A B C D
92 .223 .481 .625 .102
92A .260 .481 .625 .102
95 .640 1.015 1.30 .125

Cable Groups
Delta Cable Groups Cable Group Finder
Group Cables Cable Group Cable Group
RG-5, 5A, B 1A RG-225 3C
1A RG-5, 5A, 5B, 21, 21A; M17/73, /162
RG-6, 6A 1B RG-228A 20
1 1B RG-6, 6A; M17/2 RG-8, 8A 2A RG-302 22
1C RG-143, 143A, 212, 222; M17/73, /112, /162 RG-9, 9A, B 3A RG-303 23
RG-10 15 RG-304 24
2A RG-8, 8A, 213; M17/74
2 RG-11, 11A 2B RG-316 9A
2B RG-11, 11A; M17/6
RG-12 15 RG-316DS 10
3A RG-9, 9A, 9B, 214; M17/75 RG-13A 3B RG-393 4
3 3B RG-13A, 216; M17/77 RG-14A 16 RG-400 6A
RG-17A 17 RG-401 12
3C RG-225; M17/127
RG-18A 18 RG-402 13
4 RG-393; M17/127
RG-21, 21A 1A RG-405 14
5 RG-58, 58A, 58C, 141, 141A; M17/28, /111 RG-22, 22A, B 28 M17/2 1B
6A RG-55A, 142, 142A, 223, 400; M17/60, /84, /128 RG-55, 55B 6B M17/6 2B
6 RG-55A 6A M17/15 28
6B RG-55, 55B, 142B; M17/60, /84
RG-58, 58A, C 5 M17/28 5
7A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97
7 RG-59, 59A, B 7A M17/29 7A
7B RG-71, 71A, 71B; M17/90 RG-62, 62A, B, C 7A M17/30 7A
8A RG-122; M17/54 RG-71, 71A, B 7B M17/45 27
8 RG-108, 108A 27 M17/73 1A
8B RG-180, 180A, 180B, 195; M17/95, /137
RG-115A 19 M17/162 1A
9A RG-174, 188, 188A, 316; M17/152
9 RG-118A 20 M17/112 1C
9B RG-179A, 179B, 187, 187A; M17/94, /136 RG-122 8A M17/74 2A
10 Double-Shielded RG-174, 316; M17/152 RG-126 21 M17/75 3A
RG-141, 141A 5 M17/127 3C
11 RG-178, 178A, 178B, 196, 196A; M17/93
RG-142, 142A 6A M17/77 3B
12 .250" semi-rigid; RG-401; M17/129
RG-142B 6B M17/60 6A
13 .141" semi-rigid; RG-402; M17/130 RG-143, 143A 1C M18/84 6A
14 .085" semi-rigid; RG-405; M17/133 RG-174 9A M17/128 6A
RG-174DS 10 M17/97 7A
15 RG-10, 12, 215; M17/6, /74
RG-178, 178A, B 11 M17/54 8A
16 RG-14A, 217; M17/78, /165
RG-179A, 179B 9B M17/95 8B
17 RG-17A, 218 RG-180, 180A, B 8B M17/137 8B
18 RG-18A, 219 RG-187, 187A 9B M17/152 9A
RG-188, 188A 9A M17/93 11
19 RG-115A
RG-195 8B M17/129 12
20 RG-118A, 228A
RG-196, 196A 11 M17/130 13
21 RG-126 RG-210 7A M17/133 14
22 RG-302 RG-212 1C M17/78 16
RG-213 2A M17/165 16
23 RG-303
RG-214 3A M17/176 30
24 RG-304
RG-215 15 AT&T 735A 31
25 Special 8X cable; contact factory for details. RG-217 16 Belden 8281 26
26 Belden 8281 RG-218 17 Belden 9207 29
RG-219 18 Dearborn 6207 29
27 RG-108, 108A; M17/45
RG-222 1C IBM 7362211 29
28 RG-22, 22A, 22B; M17/15
RG-223 6A
29 Belden 9207; Dearborn 6207; IBM 7362211
Note: MIL-PRF-39012 QPL connectors have cable
30 M17/176 groups defined by the MIL specification, not the
Delta cable groups shown here. See page 185
31 AT&T 735A
for M39012 cable groups.

Assembly Procedures
Assembly Procedure A
Washer
Backnut (if supplied) Washer and/or bushing
(if supplied) Contact (captive)
& insulator
1) Trim cable jacket to dimension A.
Slide backnut, washer, V-gasket, and
or
braid clamp onto cable as shown.
A
Cable jacket should bottom on step V-Gasket Contact
Braid Clamp
in braid clamp. (non-captive)
Fold braid over

2) Comb braid wires out straight and fold back over front C
shoulder of braid clamp (braid wires should not overlap
one another after folding). Trim braid wires flush with step
of braid clamp. Trim cable dielectric and center conductor
to dimensions B and C. B
3) If support insulator is provided for RG-62 or 71 cable, insert Non-captive Contact Captive Contact
into hollow in dielectric. Assemble rear bushing or washer (if Solder
supplied), rear insulator (if captive contact) and contact, and

solder contact to center conductor. Rear of contact should be
flush with cable dielectric end. For right angle connectors Solder
with access cap, omit this step entirely. Washer or bushing (if supplied)
4) Insert prepared cable and hardware into body

and tighten backnut. For right angle connectors
with access cap, solder center conductor into slot
in contact and tighten access cap.
Trim Codes For Assembly Procedure A

Code A B C Code A B C
A/01 .375 (3/8) .047 (3/64) .203 (13/64) A/20 .375 (3/8) .047 (3/64) .172 (11/64)
A/02 .375 (3/8) .109 (7/64) .203 (13/64) A/21 .500 (1/2) .313 (5/16) .172 (11/64)
A/03 .438 (7/16) .250 (1/4) .188 (3/16) A/22 .375 (3/8) .188 (3/16) .141 (9/64)
A/04 .281 (9/32) .047 (3/64) .125 (1/8) A/23 .438 (7/16) .078 (5/64) .172 (11/64)
A/05 .313 (5/16) .125 (1/8) .109 (7/64) A/24 .500 (1/2) .094 (3/32) .141 (9/64)
A/06 .594 (19/32) .391 (25/64) .156 (5/32) A/25 .438 (7/16) .141 (9/64) .172 (11/64)
A/07 .375 (3/8) .047 (3/64) .125 (1/8) A/26 .625 (5/8) .281 (9/32) .250 (1/4)
A/08 .281 (9/32) .109 (7/64) .094 (3/32) A/27 .688 (11/16) .281 (9/32) .125 (1/8)
A/09 .344 (11/32) .109 (7/64) .094 (3/32) A/28 .656 (21/32) .297 (19/64) .250 (1/4)
A/10 .406 (13/32) .109 (7/64) .203 (13/64) A/29 .688 (11/16) .125 (1/8) .313 (5/16)
A/11 .500 (1/2) .281 (9/32) .156 (5/32) A/30 .688 (11/16) .469 (15/32) .156 (5/32)
A/12 .343 .040 .219 A/31 .700 (21/32) .453 (29/64) .250 (1/4)
A/13 .375 (3/8) .125 (1/8) .156 (5/32) A/32 .313 (5/16) .078 (5/64) .188 (3/16)
A/14 .355 .090 .188 (3/16) A/33 .250 (1/4) .078 (5/64) .094 (3/32)
A/15 .425 .094 (3/32) .259 A/34 .250 (1/4) .062 (1/16) .109 (7/64)
A/16 .328 (21/64) .094 (3/32) .188 (3/16) A/35 .837 .575 .150
A/17 .375 (3/8) .109 (7/64) .125 (1/8) A/36 .450 .250 .150
A/18 .375 (3/8) .062 (1/16) .172 (11/64) A/37 .281 .038 .188
A/19 .375 (3/8) .188 (3/16) .094 (3/32) A/38 .281 .069 .156

Assembly Procedures
Assembly Procedure B
Crimp Sleeve Contact (captive)
1) Trim cable per chart. Slide crimp or

sleeve back onto cable.
A Contact
(non-captive)
B C
2) If support insulator is provided for RG-62 or 71 cable, insert

into hollow in dielectric. Solder contact onto center conductor;
back of contact flush with trimmed end of cable dielectric
(omit this step for right angle connectors with access caps). Solder
Flare cut end of braid slightly by rotating dielectric.
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail.
a) For captive contact connectors, push cable in until contact snaps into insulator.
b) For noncaptive contact connectors, push cable in until cable dielectric bottoms
in connector.
c) For right angle or tee connectors with access caps, push cable in until end of
braid touches connector body shoulder, and cable center conductor rests in
contact slot.
Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward
until flush with body and crimp (see page 211 for hex die sizes).
For right angle or tee connectors with access caps: Solder center conductor into
contact slot, assemble insulator disc (if supplied), then press cap into body until
seated or screw into place.
Trim Codes For Assembly Procedure B

B/01 .320 .470 .140 B/20 .250 .375 .156
B/02 .422 .578 .172 B/21 .425 .550 .156
B/03 .406 .500 .187 B/22 .375 .500 .156
B/04 .285 .505 .140 B/23 .281 .469 .125
B/05 .335 .460 .140 B/24 .250 .700 .109
B/06 .187 .437 .219 B/25 .343 .775 .125
B/07 .422 .610 .156 B/26 .343 .437 .109
B/08 .422 .562 .219 B/27 .313 .437 .187
B/09 .313 .610 .203 B/28 .219 .271 .078
B/10 .280 .436 .187 B/29 .200 .320 .060
B/11 .430 .542 .156 B/30 .500 .650 .219
B/12 .300 .434 .156 B/31 .350 .840 .150
B/13 .300 .447 .156 B/32 .175 .260 .095
B/14 .420 .645 .187 B/33 .195 .270 .045
B/15 .300 .420 .120 B/34 .150 .250 .105
B/16 .312 .609 .125 B/35 .195 .280 .170
B/17 .250 .500 .156 B/36 .150 .325 .090
B/18 .437 .562 .109 B/37 .195 .295 .075
B/19 .343 .437 .156 B/38 .150 .225 .095
B/39 .250 .300 .135

Assembly Procedures
Assembly Procedure C
Backnut Washer Contact (captive)
& insulator
1) Trim cable jacket to dimension A.
Slide backnut, washer, gasket, and
or braid clamp onto cable as shown.
Cable jacket should bottom on step
Contact in braid clamp.
A (non-captive)
Gasket
Braid Clamp
Trim Codes Fold braid over 2) Comb braid wires out straight and fold back over front
C
Code A B C shoulder of braid clamp (braid wires should not overlap
one another after folding). Trim braid wires flush with
C/01 .656 (21/32) .141 (9/64) .250 (1/4)
edge of braid clamp. Trim cable dielectric and center
C/02 .500 (1/2) .125 (1/8) .250 (1/4) B conductor to dimensions B and C.
C/03 .450 .136 .187

Non-captive
C/04 .375 (3/8) .109 (7/64) .125 (1/8) 3) If support insulator is provided for RG-62 or 71 cable,
insert into hollow in dielectric. Assemble rear insulator
C/05 .375 (3/8) .062 (1/16) .250 (1/4)
Solder (if captive contact) and contact, and solder contact to
C/06 .500 (1/2) .188 (3/16) .125 (1/8) center conductor. Rear of contact should be flush with
cable dielectric end.
C/07 .575 .438 .094 Captive
C/08 .625 (5/8) .141 (9/64) .219 (7/32)

4) Insert prepared cable and
hardware into body and
tighten backnut. For right
angle connectors with access
cap, solder cable center
conductor to slot in contact
and tighten access cap.
Assembly Procedure D
Backnut 1) Slide armor clamp over cable. Push

Washer Contact (captive)
& insulator armor back to expose cable end.
Slide backnut, washer (if supplied),
or gasket, and braid clamp onto cable
as shown. Cable jacket should
Contact
A (non-captive) bottom on step in braid clamp.
V-Gasket
Armor Clamp Braid Clamp Trim cable jacket to dimension A.
Fold braid over 2) Comb braid wires out straight and fold back over
C front shoulder of braid clamp (braid wires should
not overlap one another after folding). Trim braid
wires flush with edge of braid clamp. Trim cable
dielectric and center conductor to dimensions B
B and C.
Non-captive
Trim Codes
3) Assemble rear insulator (if captive contact) and
Code A B C contact, and solder contact to center conductor.
Solder
Rear of contact should be flush with cable
D/01 .375 (3/8) .047 (3/64) .250 (1/4) dielectric end.
D/02 .500 (1/2) .188 (3/16) .219 (7/32) Captive
D/03 .344 (11/32) .047 (3/64) .219 (7/32)
D/04 .313 (5/16) .047 (3/64) .172 (11/64)
D/05 .625 (5/8) .281 (9/32) .250 (1/4)
D/06 .313 (5/16) .062 (1/16) .109 (7/64)

4) Insert prepared cable and hardware into body and tighten backnut.
Trim armor to fit between armor clamp and braid clamp. Tighten armor clamp.

Assembly Procedures
Assembly Procedure E
Backnut C
B 1) Slide backnut onto cable as
shown. Trim cable to dimen-
sions A and B as shown. Slit
jacket to dimension C in two
A
Contact/Insulator/ places, 180° apart.
cone grip assembly
Trim Codes
Code A B C
E/01 .250 (1/4) .141 (9/64) .313 (5/16) 2) Slide cone/insulator/contact assembly under
E/02 .219 (7/32) .063 (1/16) .250 (1/4) braid until braid is flush with shoulder.
Solder
Solder contact to center conductor.
E/03 .250 (1/4) .031 (1/32) .250 (1/4)
3) Insert prepared cable and

hardware into body; tight-
en assembly by holding
nut stationary and turning
body.
Assembly Procedure F
Backnut Washer Contact (captive),

B insulator, & bushing
1) Trim cable per chart. Slide backnut,

or washer, v-gasket, and solder ferrule
onto cable. Trimmed end of cable
Contact jacket should bottom on step in
Trim Codes Solder Ferrule
A (non-captive)
solder ferrule.
V-Gasket
Code A B
Solder
F/01 .250 (1/4) .219 (7/32)
Captive 2) Solder ferrule to cable jacket as shown. Retrim
F/02 .250 (1/4) .172 (11/64)
cable dielectric to proper length if it has
F/03 .188 (3/16) .188 (3/16)
extruded from soldering heat. Slide bushing
F/04 .109 (7/64) .265 (17/64) Solder
Solder
and rear insulator over cable dielectric if captive
contact. Solder contact onto center conductor;
F/05 .156 (5/32) .250 (1/4)
back of contact flush with trimmed end of
F/06 .219 (7/32) .250 (1/4) cable dielectric.
Non-captive
F/07 .156 (5/32) .172 (11/64)
F/08 .109 (7/64) .219 (7/32)
3) Insert prepared
cable and hard-
ware into body
and tighten
backnut.

Assembly Procedures
Assembly Procedure G
Gasket Coupling nut
‘C’ ring Soft solder
Body
all around with end of body
B
A
1) Trim cable as shown. 2) Soft solder cable jacket to 3) Assemble ‘C’ ring and gasket
Remove any burrs body, making sure that end to body. Compress ‘C’ ring
Trim Codes from jacket and of cable is flush with end of and slide body assembly into
Code A B center conductor. body. After solder joint has coupling nut until ring is
cooled, retrim any protrud- seated in groove.
G/01 .090 70-90° ing dielectric flush with end
of body.
Assembly Procedure H
Body assembly
with insulator
Contact Soft solder
all around
A .015"
Trim Codes 1) Trim cable as shown. 2) Solder contact to center 3) Insert cable into body and
Code A Remove any burrs conductor, fixturing to solder cable jacket to body,
H/01 .090 from jacket and maintain gap as shown. keeping end of cable flush
H/02 .060 center conductor. Remove any excess solder with insulator as shown.
H/03 .115 from outside of contact.
H/04 .150 Plug body assembly and contact shown; procedure is identical for jack connectors.
Assembly Procedure I
Body assembly
with insulator
Soft solder
all around
B
A
1) Trim cable as shown. 2) Insert cable into body and
Trim Codes Remove any burrs solder cable jacket to body,
from jacket and keeping end of cable flush
Code A B center conductor. with insulator as shown.
I/01 .090 70-90°
Plug body assembly and contact shown; procedure is identical for jack connectors.
Cable Positioner
.250-36 UNS-2A thread
.375
For .085" Cable:
P/N 63-10072-2
.50
For .141" Cable:
P/N 63-10072-1 Using this positioner in the final step of assembly procedure H or I (for plugs only)
will ensure that the contact and insulator are retained in the proper position to
meet MIL-C-39012 requirements. The positioner should be screwed finger-tight
into the mating end of the connector (as shown at right) before the cable jacket is
soldered to the body assembly.

Assembly Procedures
Assembly Procedure J
Press cap in
until seated
Cap
Soft solder
Trim Codes all around Insulator
(if supplied)
Code A B Solder center
conductor to
J/01 .109 .047 contact
B
J/02 .059 .039
J/03 .059 .079 A

J/04 .050 .059
1) Trim cable as shown. 2) Soft solder cable jacket to body, making sure
Remove any burrs that end of cable is flush with step in body.
from jacket and Solder center conductor into contact slot,
center conductor. assemble insulator disc (if supplied), then press
cap into body until seated or screw into place.
Assembly Procedure K
Heat-shrink tubing
(if supplied) Crimp or solder sleeve
1) Trim cable per chart. Slide crimp (or

solder) sleeve and heat-shrink tubing
(if supplied) back onto cable.
A
Solder hole
(for solder-type B C
connectors only)
Solder
2) Solder contact onto center conductor, fixturing to
maintain gap as shown. Flare cut end of braid slightly
.015" by rotating dielectric.
Cable dielectric end

Heat-shrink tubing 3) Insert cable/contact into rear of body, with all braid wires on outside
of crimp tail. Push cable in until cable dielectric bottoms in connector.
Trim excess braid wires even with shoulder of body. Slide crimp sleeve
forward until flush with body and crimp (see page 211 for hex die
sizes). (For solder-type connectors, solder braid to body and sleeve
Crimp or solder sleeve through hole in sleeve.) Slide heat-shrink tubing into place and shrink
with hot-air gun.
Plug body assembly and contact shown; procedure is identical for jack connectors.
Trim Codes
K/01 .250 .270 .110 K/07 .220 .290 .135
K/02 .200 .270 .140 K/08 .420 .620 .090
K/03 .225 .290 .110 K/09 .090 .135 .160
K/04 .225 .330 .110 K/10 .250 .415 .115
K/05 .250 .330 .110 K/11 .250 .400 .150
K/06 .250 .315 .095 K/12 .282 .390 .140

Assembly Procedures
Assembly Procedure L
Trim Codes
Code A B C
L/01 .250 .438 .109
L/02 .125 .219 .109 1) Trim cable per chart. Slide crimp
(or solder) sleeve onto cable.
L/03 .234 .344 .109
A
L/04 .195 .270 .050 Solder hole
L/05 .095 .155 .050
L/06 .281 .390 .070
Press cap in
until seated
2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push
Cap
cable in until end of braid touches connector body shoulder and center conductor
Insulator
rests in contact slot. (if supplied)
Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex Solder center
die sizes). (For solder-type connectors, solder braid to body and sleeve through conductor to
Crimp or solder sleeve contact
hole in sleeve.)
Solder center conductor into contact slot, assemble insulator disc (if supplied),
then press cap into body until seated or screw into place.
Assembly Procedure M
Backnut
Cable Trim Codes 1) Trim cable per chart. Crimp or solder sleeve Clamp Contact
Code A B C Slide crimp (or solder)
M/01 .281 .390 .140 sleeve and backnut
onto cable. A Insulator
Solder hole
(for solder-type connectors)
B C
2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all
braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is flush with front
of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor,
Solder
with contact shoulder flush with front of insulator. Solder contact to center conductor.
3) Slide crimp sleeve forward until flush with clamp shoulder; crimp as close to shoulder as
possible. (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body
and sleeve through hole in sleeve.)
4) Insert prepared cable into back of body. Slide nut forward and tighten to 12–15 inch-pounds.
Crimp Tools For Flexible Cable

Frame only—P/N M22520/5-01 —Use with interchangeable dies listed below.
Cable Group* Hex Die Size Die Set P/N Closure
M22520/5-01
2, 3, 4 .429 hex, .400 wide M22520/5-61 A
5, 6 .213 hex, .400 wide M22520/5-19 B
7 .255 hex, .400 wide M22520/5-19 A
* For Delta cable groups. See MIL-PRF-39012 9 .128 hex, .400 wide M22520/5-35 B
specifications for dies sizes used with 10 .151 hex, .400 wide M22520/5-37 B
M39012 cable groups. 11 .105 hex, .400 wide M22520/5-33 B

Index By Part Number
Delta P/N Page Delta P/N Page Delta P/N Page
10-10676-01-AG. . . . . . . . 170 1004019N005-000. . . . . . . 16 1011036N070-000. . . . . . . 20
10-10677-01-AG. . . . . . . . 170 1004021N000-000. . . . . . . 15 1011036N071-000. . . . . . . 20
10-10678-01-AG. . . . . . . . 170 1004021N001-000. . . . . . . 15 1011037N075-000. . . . . . . 21
10-10679-01-AG. . . . . . . . 170 1004025N003-000. . . . . . . 15 1011038N070-000. . . . . . . 20
10-10680-01-AG. . . . . . . . 170 1004029N005-000. . . . . . . 16 1011038N071-000. . . . . . . 20
10-10681-01-AG. . . . . . . . 170 1004031N003-000. . . . . . . 15 1011038N075-000. . . . . . . 21
10-10682-01-AG. . . . . . . . 170 1004036N000-000. . . . . . . 15 1011043N075-000. . . . . . . 21
10-10683-01-AG. . . . . . . . 170 1004037N005-000. . . . . . . 16 1011100N075-000. . . . . . . 21
10-10684-01-AG. . . . . . . . 170 1004038N005-000. . . . . . . 16 1013000F181-000 . . . . . . . 22
10-10685-01-AG. . . . . . . . 170 1004043N000-000. . . . . . . 15 1013000N090-000. . . . . . . 22
10-10686-01-AG. . . . . . . . 170 1004043N005-000. . . . . . . 16 1013000N100-000. . . . . . . 22
10-10688-01-AG. . . . . . . . 170 1004100N005-000. . . . . . . 16 1013000N180-000. . . . . . . 22
1001001N000-001 . . . . . . . 13 1005014N000-000. . . . . . . 15 1013000N330-000. . . . . . . 22
1001015N001-000. . . . . . . 13 1005021N000-001 . . . . . . . 15 1015000N070-000. . . . . . . 23
1001015N005-003 . . . . . . . 14 1005029N000-000. . . . . . . 15 1015000N090-000. . . . . . . 23
1001018N005-000. . . . . . . 14 1005036N000-000. . . . . . . 15 1015000N330-000. . . . . . . 23
1001019N005-000. . . . . . . 14 1007015N000-000. . . . . . . 16 1016004N511-000. . . . . . . 18
1001021N001-000. . . . . . . 13 1007017N000-003 . . . . . . . 16 1016015N591-000. . . . . . . 18
1001025N003-000. . . . . . . 13 1007019N000-001 . . . . . . . 16 1016015N595-000. . . . . . . 19
1001029N001-000. . . . . . . 13 1008004N000-000. . . . . . . 17 1016018N595-000. . . . . . . 19
1001029N005-001 . . . . . . . 14 1008015N001-000. . . . . . . 17 1016019N595-000. . . . . . . 19
1001031N003-000. . . . . . . 13 1008015N005-000. . . . . . . 17 1016021N591-000. . . . . . . 18
1001036N000-000. . . . . . . 13 1008018N005-001 . . . . . . . 17 1016025N593-000. . . . . . . 19
1001036N001-000. . . . . . . 13 1008019N005-000. . . . . . . 17 1016029N595-000. . . . . . . 19
1001037N005-000. . . . . . . 14 1008021N001-000. . . . . . . 17 1016031N593-000. . . . . . . 19
1001038N000-000. . . . . . . 13 1008025N003-000. . . . . . . 17 1016036N590-000. . . . . . . 18
1001038N005-000. . . . . . . 14 1008029N005-000. . . . . . . 17 1016036N591-000. . . . . . . 18
1001043N000-000. . . . . . . 13 1008031N003-000. . . . . . . 17 1016037N595-000. . . . . . . 19
1001043N001-000. . . . . . . 13 1008036N000-000. . . . . . . 17 1016038N590-000. . . . . . . 18
1001043N005-000. . . . . . . 14 1008036N001-000. . . . . . . 17 1016038N591-000. . . . . . . 18
1001100N005-000. . . . . . . 14 1008037N005-000. . . . . . . 17 1016038N595-002 . . . . . . . 19
1001132N000-000. . . . . . . 13 1008038N000-000. . . . . . . 17 1016043N595-000. . . . . . . 19
1003005N000-000. . . . . . . 14 1008038N005-002 . . . . . . . 17 1016100N595-002 . . . . . . . 19
1003013N000-000. . . . . . . 14 1008043N005-000. . . . . . . 17 1017014N570-000. . . . . . . 18
1003013N00E-000 . . . . . . . 14 1008100N005-000. . . . . . . 17 1019013N590-000. . . . . . . 19
1003017N000-000. . . . . . . 14 1010013N000-000. . . . . . . 17 1019016N590-000. . . . . . . 19
1003017N00E-002 . . . . . . . 14 1010017N000-001 . . . . . . . 17 1019020N590-000. . . . . . . 19
1003019N00E-002 . . . . . . . 14 1010020N000-000. . . . . . . 17 1020000F59G-000 . . . . . . . 25
1003020N000-002 . . . . . . . 14 1010020N001-001 . . . . . . . 17 1020000N911-001 . . . . . . . 27
1003020N000-005 . . . . . . . 14 1011001N330-000. . . . . . . 20 1020000N911-002 . . . . . . . 27
1003020N000-006 . . . . . . . 14 1011004N330-000. . . . . . . 20 1020000N911-013 . . . . . . . 27
1003020N001-005 . . . . . . . 14 1011015N071-000. . . . . . . 20 1021000N591-000. . . . . . . 25
1003020N001-009 . . . . . . . 14 1011015N075-000. . . . . . . 21 1023000N330-000. . . . . . . 23
1003037N000-000. . . . . . . 14 1011018N075-000. . . . . . . 21 1024000N651-000. . . . . . . 25
1004001N000-000. . . . . . . 15 1011019N075-000. . . . . . . 21 1024000N911-004 . . . . . . . 27
1004004N000-000. . . . . . . 15 1011021N071-000. . . . . . . 20 1026000N591-000. . . . . . . 29
1004015N001-000. . . . . . . 15 1011025N073-000. . . . . . . 20 1028000N001-003 . . . . . . . 29
1004015N005-000. . . . . . . 16 1011029N075-000. . . . . . . 21 1029000N000-003 . . . . . . . 30
1004018N005-000. . . . . . . 16 1011031N073-000. . . . . . . 20 1031000N000-004 . . . . . . . 28

1031000N00A-001 . . . . . . . 28 1103013N000-000. . . . . . . 69 1111025N333-000. . . . . . . 78
1031000N00A-003. . . . . . . 28 1103017N000-000. . . . . . . 69 1111027N331-000. . . . . . . 77
1034000N000-000 . . . . . . . 30 1103017N001-000. . . . . . . 69 1111031A091-001 . . . . . . . 78
1038000N000-002 . . . . . . . 30 1103018N001-000. . . . . . . 69 1111031A333-004 . . . . . . . 78
1049000N000-000 . . . . . . . 30 1103020N000-000. . . . . . . 69 1111031N333-001 . . . . . . . 78
1051000N000-000 . . . . . . . 28 1103020N001-000. . . . . . . 69 1111036N330-000. . . . . . . 77
1051000N00A-002. . . . . . . 28 1103070N000-000. . . . . . . 69 1111036N331-000. . . . . . . 77
1051000N00A-005. . . . . . . 28 1103079N000-000. . . . . . . 69 1111037N335-001 . . . . . . . 77
1055015N091-000 . . . . . . . 21 1104027N001-000. . . . . . . 71 1111100N335-001 . . . . . . . 77
1055017N091-000 . . . . . . . 21 1104032N001-000. . . . . . . 71 1111123N300-000. . . . . . . 77
1055019N091-000 . . . . . . . 21 1105004N000-000. . . . . . . 71 1113000A331-001 . . . . . . .79
1056000N000-000 . . . . . . . 26 1105015N000-000. . . . . . . 71 1113000N091-002 . . . . . . . 79
1057000N000-000 . . . . . . . 26 1105015N001-000. . . . . . . 71 1113000N181-000. . . . . . . 79
1058000N04P-000. . . . . . . 26 1105021N000-000. . . . . . . 71 1113000N321-002 . . . . . . . 79
1058000N04P-001. . . . . . . 26 1105036N001-000. . . . . . . 71 1113000N321-003 . . . . . . . 79
1058000N051-000 . . . . . . . 22 1107002N000-000. . . . . . . 71 1113000N331-011 . . . . . . . 79
1058000N091-000 . . . . . . . 22 1107002N000-001 . . . . . . . 71 1113000N331-028 . . . . . . . 81
1058000N13P-000. . . . . . . 26 1107002N001-002 . . . . . . . 71 1113000N911-002 . . . . . . . 79
1058000N181-001 . . . . . . . 22 1107004N001-002 . . . . . . . 71 1113000N911-005 . . . . . . . 79
1063000N090-000 . . . . . . . 23 1107005N000-000. . . . . . . 71 1113000N951-000. . . . . . . 79
1067000N91P-001. . . . . . . 26 1107034N001-001 . . . . . . . 71 1115000N330-005 . . . . . . . 82
1069000N03P-000. . . . . . . 26 1108000N000-003 . . . . . . . 72 1115000N330-009 . . . . . . . 82
1069000N13P-000. . . . . . . 26 1108004N005-002 . . . . . . . 73 1115000N330-011 . . . . . . . 82
1101001N001-000 . . . . . . . 68 1108015N000-000. . . . . . . 72 1115000N330-012 . . . . . . . 82
1101004N005-000 . . . . . . . 69 1108015N001-000. . . . . . . 72 1116003N721-001 . . . . . . . 74
1101015N001-000 . . . . . . . 68 1108015N005-000. . . . . . . 73 1116004N720-001 . . . . . . . 74
1101015N005-000 . . . . . . . 69 1108018N005-002 . . . . . . . 73 1116004N725-000. . . . . . . 75
1101015N005-000. . . . . . . 69 1108019N005-002 . . . . . . . 73 1116015N721-000. . . . . . . 74
1101021N001-000. . . . . . . 68 1108021N001-000. . . . . . . 72 1116015N725-000. . . . . . . 75
1101021N005-000. . . . . . . 69 1108027N001-000. . . . . . . 72 1116015N725-001 . . . . . . . 75
1101025N003-000 . . . . . . . 70 1108029N005-001 . . . . . . . 73 1116021N720-000. . . . . . . 74
1101031A003-008 . . . . . . . 70 1108031A003-000 . . . . . . . 73 1116021N721-000. . . . . . . 74
1101031A003-012 . . . . . . . 70 1108037N005-002 . . . . . . . 73 1116021N725-000. . . . . . . 75
1101031K00M-000 . . . . . . 70 1108050A003-003 . . . . . . . 73 1116025A723-002 . . . . . . . 76
1101031N003-000. . . . . . . 70 1108123N000-000. . . . . . . 72 1116025N723-000. . . . . . . 76
1101031N003-001. . . . . . . 70 1110002N000-000. . . . . . . 73 1116025N723-001 . . . . . . . 76
1101036N000-000. . . . . . . 68 1110002N001-000. . . . . . . 73 1116031A723-003 . . . . . . . 76
1101036N001-000. . . . . . . 68 1110005N000-000. . . . . . . 73 1116031N720-000. . . . . . . 76
1101043N001-000. . . . . . . 68 1110005N000-000. . . . . . . 73 1116031N723-001 . . . . . . . 76
1101050A003-007. . . . . . . 70 1110013N000-000 . . . . . . . 73 1116036N721-000. . . . . . . 74
1101050N000-000. . . . . . . 70 1111004N335-000. . . . . . . 77 1116038N721-001 . . . . . . . 74
1101050N003-000. . . . . . . 70 1111015N270-000. . . . . . . 77 1116100N721-000. . . . . . . 74
1101052N005-000. . . . . . . 69 1111015N271-000. . . . . . . 77 1116100N725-000. . . . . . . 75
1101108N005-000. . . . . . . 69 1111015N331-000. . . . . . . 77 1116163N721-000. . . . . . . 76
1101132N000-000. . . . . . . 68 1111015N335-000. . . . . . . 77 1119013N721-000. . . . . . . 74
1103002N000-000. . . . . . . 69 1111015N335-001 . . . . . . . 77 1119020N720-000. . . . . . . 74
1103002N001-000. . . . . . . 69 1111021N335-000. . . . . . . 77 1119036N721-000. . . . . . . 74
1103004N001-001. . . . . . . 69 1111025A091-001 . . . . . . . 78 1119100N721-000. . . . . . . 74
1103005N000-000. . . . . . . 69 1111025A333-002 . . . . . . . 78 1120000N590-000. . . . . . . 84

1120000N590-004 . . . . . . . 84 1156000N000-002 . . . . . . . 84 1201043N000-000. . . . . . 137
1120000N591-000 . . . . . . . 84 1156000N000-003 . . . . . . . 84 1201043N001-000. . . . . . 137
1120000N831-000 . . . . . . . 79 1157000N000-003 . . . . . . . 84 1201043N005-000. . . . . . 138
1120000N911-002. . . . . . . 85 1158000A091-023 . . . . . . . 80 1201100N005-000. . . . . . 138
1120000N911-003 . . . . . . . 85 1158000A331-012 . . . . . . . 80 1203005N000-000. . . . . . 138
1120000N911-004 . . . . . . . 85 1158000N331-015 . . . . . . . 81 1203013N000-000. . . . . . 138
1121000N728-005 . . . . . . . 84 1159000N091-004 . . . . . . . 83 1203013N002-000. . . . . . 152
1123000N330-000 . . . . . . . 83 1159000N091-010 . . . . . . . 83 1203017N000-000. . . . . . 138
1123000N330-002 . . . . . . . 83 1159000N330-001 . . . . . . . 83 1203017N002-000. . . . . . 152
1123000N330-004 . . . . . . . 83 1159000N330-011 . . . . . . . 83 1203020N000-000. . . . . . 138
1124000N911-000 . . . . . . . 85 1159000N330-013 . . . . . . . 83 1203020N000-003 . . . . . . 138
1124000N911-001 . . . . . . . 85 1159000N331-000 . . . . . . . 83 1203020N000-005 . . . . . . 138
1124000N911-002 . . . . . . . 85 1159000N331-006 . . . . . . . 83 1203020N001-003 . . . . . . 138
1125000N330-000 . . . . . . . 87 1159000N331-009 . . . . . . . 83 1204001N000-000. . . . . . 139
1126000N728-000 . . . . . . . 87 1159000N331-026 . . . . . . . 83 1204004N000-000. . . . . . 139
1131000N000-000 . . . . . . . 86 1163000N330-000 . . . . . . . 82 1204004N001-000. . . . . . 139
1131000N00A-000. . . . . . . 86 1185002A000-000 . . . . . . . 72 1204015N000-000. . . . . . 139
1132000N00C-002. . . . . . . 86 1185002A551-000 . . . . . . . 75 1204015N001-000. . . . . . 139
1133000N000-000 . . . . . . . 86 1185004A000-002 . . . . . . . 72 1204015N005-000. . . . . . 140
1133000N00C-000 . . . . . . 86 1185004A551-000 . . . . . . . 75 1204018N005-000. . . . . . 140
1134000N000-000. . . . . . . 87 1185013A001-000 . . . . . . . 72 1204019N005-000. . . . . . 140
1137000N000-000. . . . . . . 88 1185013A551-000 . . . . . . . 75 1204021N000-000. . . . . . 139
1143000N051-002. . . . . . . 81 1185019A000-000 . . . . . . . 72 1204021N001-000. . . . . . 139
1143000N091-002 . . . . . . . 80 1185019A551-000 . . . . . . . 75 1204025N003-000. . . . . . 140
1143000N091-003 . . . . . . . 80 1185031A000-000 . . . . . . . 72 1204029N005-000. . . . . . 140
1143000N091-004 . . . . . . . 80 1185031A551-000 . . . . . . . 75 1204031N003-000. . . . . . 140
1143000N091-009. . . . . . . 80 1185036A000-000 . . . . . . . 72 1204036N000-000. . . . . . 139
1143000N091-018 . . . . . . . 81 1185036A551-000 . . . . . . . 75 1204037N005-000. . . . . . 140
1143000N091-030 . . . . . . . 81 1201001N000-000. . . . . . 137 1204038N005-000. . . . . . 140
1143000N091-059 . . . . . . . 81 1201004N000-000. . . . . . 137 1204043N005-000. . . . . . 140
1143000N091-069 . . . . . . . 81 1201004N001-004. . . . . . 137 1204100N005-000. . . . . . 140
1143000N091-073 . . . . . . . 81 1201015N000-000. . . . . . 137 1205018N000-000. . . . . . 139
1143000N091-075 . . . . . . . 81 1201015N001-000. . . . . . 137 1205021N000-000. . . . . . 139
1143000N330-010 . . . . . . . 80 1201015N005-000. . . . . . 138 1205029N000-000. . . . . . 139
1143000N330-012 . . . . . . . 80 1201018N005-000. . . . . . 138 1205036N000-001 . . . . . . 139
1143000N330-018 . . . . . . . 81 1201019N005-000. . . . . . 138 1207015N000-000. . . . . . 140
1143000N331-017 . . . . . . . 80 1201021N000-000. . . . . . 137 1207017N000-000. . . . . . 140
1143000N331-023 . . . . . . . 80 1201021N001-000. . . . . . 137 1207020N000-000. . . . . . 140
1143000N331-054 . . . . . . . 80 1201025N003-000. . . . . . 139 1208001N000-000. . . . . . 141
1143000N331-055 . . . . . . . 80 1201029N000-000. . . . . . 137 1208004N000-000. . . . . . 141
1149000N001-001 . . . . . . . 88 1201029N001-000. . . . . . 137 1208015N000-000. . . . . . 141
1151000N000-000 . . . . . . . 86 1201029N005-000. . . . . . 138 1208015N001-000. . . . . . 141
1151000N000-003. . . . . . . 86 1201031N003-000. . . . . . 139 1208015N005-000. . . . . . 141
1151000N000-010. . . . . . . 86 1201036N000-000. . . . . . 137 1208018N005-001 . . . . . . 141
1151000N000-011. . . . . . . 86 1201036N001-002. . . . . . 137 1208019N005-000. . . . . . 141
1155013N331-000 . . . . . . . 78 1201037N005-000. . . . . . 138 1208021N000-000. . . . . . 141
1155017N331-000 . . . . . . . 78 1201038N000-000. . . . . . 137 1208021N001-000. . . . . . 141
1155037N331-000 . . . . . . . 78 1201038N001-000. . . . . . 137 1208025N003-000. . . . . . 141
1156000N000-000 . . . . . . . 84 1201038N005-000. . . . . . 138 1208029N005-000
5 . . . . . . 141

1208031N003-000. . . . . . . . . 141 1216018N595-000. . . . . . . . 142 1231000N000-000 . . . . . . . . . 148

1208036N000-000 . . . . . . . . 141 1216019N595-000. . . . . . . . 142 1231000N00A-002 . . . . . . . . . 148
1208036N001-000. . . . . . . . . 141 1216021N590-002 . . . . . . . 142 1232000N000-000 . . . . . . . . . 148
1208037N005-000. . . . . . . . . 141 1216021N591-000. . . . . . . . 142 1232000N00A-000 . . . . . . . . . 148
1208038N000-000 . . . . . . . . 141 1216021N59E-000. . . . . . . . 142 1232000N00C-000 . . . . . . . . . 148
1208038N005-000. . . . . . . . . 141 1216025N593-000. . . . . . . . 142 1233000N000-002 . . . . . . . . . 148
1208043N005-000. . . . . . . . . 141 1216029N595-000. . . . . . . . 142 1233000N00A-000 . . . . . . . . . 148
1208100N005-000. . . . . . . . . 141 1216031N593-000. . . . . . . . 142 1233000N00C-000 . . . . . . . . . 148
1210013N000-000 . . . . . . . . 141 1216036N590-000 . . . . . . . 142 1234000N000-000 . . . . . . . . . 150
1210013N002-000. . . . . . . . . 152 1216036N591-005 . . . . . . . .142 1238000N000-000 . . . . . . . . . 151
1210017N000-000 . . . . . . . . 141 1216037N595-000. . . . . . . . 142 1240004N000-000 . . . . . . . . . 137
1210017N002-000. . . . . . . . . 152 1216038N590-002 . . . . . . . .142 1240004N001-000 . . . . . . . . . 137
1210020N000-000. . . . . . . . . 141 1216038N591-001 . . . . . . . .142 1240015N000-000 . . . . . . . . . 137
1210020N001-000. . . . . . . . . 141 1216038N595-000. . . . . . . . 142 1240015N001-000 . . . . . . . . . 137
1211001N330-000. . . . . . . . . 143 1216043N595-000. . . . . . . . 142 1240021N000-000 . . . . . . . . . 137
1211004N330-000 . . . . . . . . 143 1216100N595-002 . . . . . . . .142 1240021N001-000 . . . . . . . . . 137
1211015N070-000 . . . . . . . . 143 1219013N590-002 . . . . . . . .142 1240025N003-000 . . . . . . . . . 139
1211015N071-000. . . . . . . . . 143 1219013N592-000. . . . . . . . 152 1240031N003-000 . . . . . . . . . 139
1211015N075-000. . . . . . . . . 143 1219017N590-000 . . . . . . . 142 1240036N000-000 . . . . . . . . . 137
1211018N075-001 . . . . . . . . .143 1219017N592-000. . . . . . . . 152 1240036N001-000 . . . . . . . . . 137
1211019N075-000. . . . . . . . . 143 1219020N590-000 . . . . . . . 142 1241000N000-000 . . . . . . . . . 151
1211021N070-000 . . . . . . . . 143 1220000N620-000 . . . . . . . 146 1242000N000-000 . . . . . . . . . 151
1211021N071-000. . . . . . . . . 143 1220000N622-000. . . . . . . . 152 1243000F09E-001 . . . . . . . . . 144
1211025N073-000. . . . . . . . . 143 1220000N62E-001 . . . . . . . .146 1243000F09E-002 . . . . . . . . . 144
1211029N075-000. . . . . . . . . 143 1220000N638-000. . . . . . . . 146 1249000N000-000 . . . . . . . . . 151
1211031N073-000. . . . . . . . . 143 1220000N650-000 . . . . . . . 146 1256000N000-002 . . . . . . . . . 147
1211036N070-000 . . . . . . . . 143 1220000N652-001 . . . . . . . .152 1256000N000-003 . . . . . . . . . 147
1211036N071-000. . . . . . . . . 143 1220000N656-000. . . . . . . . 146 1258000N051-000 . . . . . . . . . 144
1211037N075-000. . . . . . . . . 143 1220000N65E-000. . . . . . . . 146 1258000N091-009 . . . . . . . . . 144
1211038N070-000 . . . . . . . . 143 1220000N65G-000. . . . . . . .146 1258000N181-000 . . . . . . . . . 144
1211038N075-000. . . . . . . . . 143 1220000N911-002 . . . . . . . .147 1258000N181-009 . . . . . . . . . 144
1211043N075-000. . . . . . . . . 143 1220000N911-003 . . . . . . . .147 1259000N091-001 . . . . . . . . . 145
1211100N075-000. . . . . . . . . 143 1220000N911-005 . . . . . . . .147 1259000N091-002 . . . . . . . . . 145
1212000N070-000 . . . . . . . . 144 1221000N591-003 . . . . . . . .146 1259000N091-003 . . . . . . . . . 145
1213000N071-000. . . . . . . . . 144 1221000N598-000. . . . . . . . 146 1261000A00M-001 . . . . . . . . . 149
1213000N072-005 . . . . . . . . .152 1222000N630-001 . . . . . . . .146 1261000A00M-002 . . . . . . . . . 149
1213000N080-000 . . . . . . . . 144 1222000N630-002 . . . . . . . .146 1261000A00M-003 . . . . . . . . . 149
1213000N090-000 . . . . . . . . 144 1223000N180-000 . . . . . . . 145 1261000A00M-004 . . . . . . . . . 149
1213000N092-000. . . . . . . . . 152 1223000N330-000. . . . . . . . 145 1261000A00M-005 . . . . . . . . . 149
1213000N180-000 . . . . . . . . 144 1224000N911-002 . . . . . . . .147 1261000A00M-006 . . . . . . . . . 149
1213000N330-000 . . . . . . . . 144 1225000N070-001 . . . . . . . .150 1263000N090-000 . . . . . . . . . 148
1215000N070-000 . . . . . . . . 145 1226000N591-001 . . . . . . . .150 1301015G005-000 . . . . . . . . . 104
1215000N080-000 . . . . . . . . 145 1226000N598-002 . . . . . . . .150 1301015K005-000 . . . . . . . . . 104
1215000N180-000 . . . . . . . . 145 1227000N000-000 . . . . . . . 150 1301025G003-500 . . . . . . . . . 124
1215000N330-000 . . . . . . . . 145 1228000N000-000 . . . . . . . 150 1301025G007-000 . . . . . . . . . 103
1216015N590-000 . . . . . . . . 142 1229000N000-000 . . . . . . . 151 1301031G003-000 . . . . . . . . . 103
1216015N591-000. . . . . . . . . 142 1230000N000-000 . . . . . . . 151 1301031G003-002 . . . . . . . . . 103
1216015N595-001 . . . . . . . . .142 1231000N000-000 . . . . . . . 148 1301031G003-003 . . . . . . . . . 103
1216015N59E-000. . . . . . . . . 142 1231000N000-005 . . . . . . . .148 1301031G003-500 . . . . . . . . . 124

1301031G003-501 . . . . . . .124 1307100K001-000 . . . . . . . . 104 1317025G673-001 . . . . . . . .105
1301031G003-502 . . . . . . .124 1308013G000-000 . . . . . . . 106 1317025G673-500 . . . . . . . . 124
1301031G007-000 . . . . . . . 103 1308013K000-000 . . . . . . . . 106 1317025G677-000 . . . . . . . . 105
1301031K003-000 . . . . . . . .103 1308017G000-000 . . . . . . . 106 1317031G673-000 . . . . . . . . 105
1301031K003-002 . . . . . . . .103 1308017K000-000 . . . . . . . . 106 1317031G673-003 . . . . . . . .105
1301031K003-008 . . . . . . . .103 1308025G003-500 . . . . . . . 124 1317031G673-500 . . . . . . . . 124
1301031K003-012 . . . . . . . 103 1308025G007-000 . . . . . . . .105 1317031G677-000. . . . . . . . 105
1301037G005-000 . . . . . . . 104 1308031G003-002. . . . . . . . 105 1319013G670-000 . . . . . . . . 106
1301037K005-000 . . . . . . . .104 1308031G003-004. . . . . . . . 105 1319013G670-500 . . . . . . . .125
1301094G003-000 . . . . . . . .103 1308031G003-500 . . . . . . . 124 1319013K670-000. . . . . . . . .106
1301094K003-000 . . . . . . . 103 1308031G007-000. . . . . . . . 105 1319017G670-000 . . . . . . . . 106
1301094K003-001. . . . . . . . 103 1308037G000-000 . . . . . . . 106 1319017G670-500 . . . . . . . .125
1303013G000-000 . . . . . . . .104 1308037K000-000 . . . . . . . .106 1319017K670-000. . . . . . . . .106
1303013G000-500 . . . . . . . 125 1308094G003-000 . . . . . . . 105 1319037G670-000 . . . . . . . .106
1303013K000-002 . . . . . . . 104 1308094G003-001. . . . . . . . 105 1319037G670-500. . . . . . . . 125
1303017G000-000 . . . . . . . .104 1310013G000-500 . . . . . . . .125 1319037K670-000. . . . . . . . .106
1303017G000-500 . . . . . . . 125 1310017G000-500 . . . . . . . .125 1319038G670-500 . . . . . . . .125
1303017K000-000 . . . . . . . 104 1310037G000-500 . . . . . . . 125 1319100G670-000 . . . . . . . .106
1303036G000-000 . . . . . . . 104 1310038G000-500. . . . . . . . 125 1319100G670-500. . . . . . . . 125
1303036K000-000. . . . . . . . 104 1310100G000-500. . . . . . . . 125 1319100K670-000 . . . . . . . . 106
1303037G000-500. . . . . . . .125 1311025G053-000 . . . . . . . .105 1320000G671-000 . . . . . . . .113
1303038G000-500. . . . . . . .125 1311025G053-001. . . . . . . . 105 1320000G671-005. . . . . . . . 113
1303100G000-002 . . . . . . . .104 1311025G053-500 . . . . . . . .124 1320000G821-000 . . . . . . . .113
1303100G000-500. . . . . . . .125 1311025G923-500 . . . . . . . .124 1320000G821-002. . . . . . . . 113
1303100K000-002 . . . . . . . .104 1311031G053-000. . . . . . . . 105 1320000G911-076. . . . . . . . 115
1305025G003-000 . . . . . . . 103 1311031G053-003. . . . . . . . 105 1320000G911-078. . . . . . . . 115
1305025G003-500. . . . . . . .124 1311031G053-500 . . . . . . . 124 1320000G911-084. . . . . . . . 115
1305025K003-000 . . . . . . . .103 1311031G923-500 . . . . . . . 124 1320000G911-085. . . . . . . . 115
1305031G003-000 . . . . . . . 103 1313000G051-000. . . . . . . . 107 1320000K671-000 . . . . . . . . 113
1305031G003-002 . . . . . . . .103 1313000G051-500 . . . . . . . .126 1320000K671-005. . . . . . . . .113
1305031G003-500. . . . . . . .124 1313000G091-000. . . . . . . . 107 1320000K821-000 . . . . . . . . 113
1305031K003-000 . . . . . . . .103 1313000G331-000. . . . . . . . 107 1320000K821-011 . . . . . . . . 113
1305031K003-004 . . . . . . . .103 1313000G911-000. . . . . . . . 107 1320000K911-002 . . . . . . . . 115
1305094G003-003 . . . . . . . .103 1313000G921-000. . . . . . . . 107 1320000K911-003 . . . . . . . . 115
1305094K003-005 . . . . . . . .103 1313000G921-002 . . . . . . . .107 1320000K911-004 . . . . . . . . 115
1307013G001-000 . . . . . . . 104 1313000G921-500 . . . . . . . .126 1321000G671-500. . . . . . . . 127
1307013G001-500. . . . . . . .125 1313000K051-002. . . . . . . . 107 1321000G820-003 . . . . . . . . 113
1307013K001-000. . . . . . . . 104 1313000K091-000 . . . . . . . . 107 1321000G821-000. . . . . . . . .113
1307017G001-000 . . . . . . . .104 1313000K331-000 . . . . . . . . 107 1321000G821-500 . . . . . . . . 127
1307017G001-500 . . . . . . . 125 1313000K911-000 . . . . . . . . 107 1321000G821-501 . . . . . . . . 127
1307017K001-000. . . . . . . . 104 1313000K921-000 . . . . . . . . 107 1321000G821-065 . . . . . . . . 113
1307036G001-000 . . . . . . . 104 1313000K921-002 . . . . . . . .107 1321000K820-003 . . . . . . . . 113
1307036K001-000. . . . . . . . 104 1315000G050-000. . . . . . . . 112 1321000K821-014 . . . . . . . . 113
1307037G001-500 . . . . . . . 125 1315000K050-000 . . . . . . . . 112 1321000K821-065 . . . . . . . . 113
1307038G001-000 . . . . . . . .104 1316015G675-000. . . . . . . . 106 1323000G051-500 . . . . . . . . 128
1307038G001-500 . . . . . . . 125 1316015K675-000 . . . . . . . . 106 1323000G920-000 . . . . . . . . 119
1307038K001-000. . . . . . . . 104 1316037G675-000. . . . . . . . 106 1323000G921-001. . . . . . . . .119
1307100G001-000 . . . . . . . .104 1316037K675-000 . . . . . . . . 106 1323000G921-500 . . . . . . . .128
1307100G001-500 . . . . . . . 125 1317025G673-000. . . . . . . . 105 1323000K920-000 . . . . . . . . 119

1323000K921-001 . . . . . . . .119 1343000K911-006 . . . . . . . .109 1358000K051-019 . . . . . . . 111
1324000K911-002 . . . . . . . .115 1343000K920-004 . . . . . . . .109 1358000K051-034 . . . . . . . 111
1324000K911-003 . . . . . . . .115 1343000K921-006 . . . . . . . .109 1358000K051-035 . . . . . . . 111
1326000G678-000. . . . . . . . 121 1349000G000-000 . . . . . . . 122 1358000K051-128 . . . . . . . 111
1326000G821-000. . . . . . . . 121 1349000K000-000 . . . . . . . .122 1358000K090-000 . . . . . . . 110
1326000K821-001 . . . . . . . .121 1357000G000-002 . . . . . . . .112 1358000K090-001 . . . . . . . .108
1327000G000-000 . . . . . . . 121 1357000G000-006 . . . . . . . .112 1358000K091-008 . . . . . . . .108
1327000G001-500 . . . . . . . .129 1357000G000-012 . . . . . . . .112 1358000K091-014 . . . . . . . .110
1327000K000-002 . . . . . . . .121 1357000K000-002 . . . . . . . .112 1358000K091-015 . . . . . . . .111
1328000G000-000 . . . . . . . 121 1357000K000-006 . . . . . . . .112 1358000K091-016 . . . . . . . .111
1328000G001-500 . . . . . . . .129 1357000K000-012 . . . . . . . .112 1358000K330-000 . . . . . . . .110
1328000K000-001 . . . . . . . .121 1358000G050-000 . . . . . . . 110 1358000K330-001 . . . . . . . .108
1329000G000-000 . . . . . . . 122 1358000G050-005 . . . . . . . .108 1358000K331-002 . . . . . . . .108
1329000G001-500 . . . . . . . .129 1358000G051-000. . . . . . . . 110 1358000K331-003 . . . . . . . .110
1329000K000-000. . . . . . . . .122 1358000G051-019 . . . . . . . .111 1358000K331-004 . . . . . . . .111
1330000G000-000 . . . . . . . 122 1358000G051-003 . . . . . . . .108 1358000K331-005 . . . . . . . .111
1330000G001-500 . . . . . . . .129 1358000G051-034 . . . . . . . .111 1358000K910-002 . . . . . . . .108
1330000K000-000 . . . . . . . .122 1358000G051-035 . . . . . . . .111 1358000K910-003 . . . . . . . .110
1332000G000-000 . . . . . . . 120 1358000G051-128 . . . . . . . .111 1358000K911-014 . . . . . . . .111
1332000K000-000 . . . . . . . .120 1358000G051-500 . . . . . . . .126 1358000K911-059 . . . . . . . .108
1332000K00A-001 . . . . . . . .120 1358000G051-501 . . . . . . . .126 1358000K911-061 . . . . . . . .110
1332000K00B-000. . . . . . . . .120 1358000G090-000 . . . . . . . 110 1358000K911-085 . . . . . . . .111
1332000K00C-000 . . . . . . . .120 1358000G090-001 . . . . . . . .108 1358000K920-000. . . . . . . . 110
1333000G000-000 . . . . . . . .120 1358000G091-008 . . . . . . . .108 1358000K920-003 . . . . . . . .108
1333000K000-000. . . . . . . . .120 1358000G091-014 . . . . . . . .110 1358000K921-010 . . . . . . . .110
1333000K00A-000 . . . . . . . .120 1358000G091-015 . . . . . . . .111 1358000K921-063 . . . . . . . .108
1334000G000-000 . . . . . . . .121 1358000G091-016 . . . . . . . .111 1359000G050-000 . . . . . . . 119
1334000G001-500. . . . . . . . 129 1358000G330-000 . . . . . . . 110 1359000G050-005 . . . . . . . .117
1334000K000-000 . . . . . . . . 121 1358000G330-001 . . . . . . . .108 1359000G050-007 . . . . . . . .118
1337000G000-001 . . . . . . . .122 1358000G331-002 . . . . . . . .108 1359000G051-010 . . . . . . . .116
1337000K000-001 . . . . . . . .122 1358000G331-003 . . . . . . . .110 1359000G051-038 . . . . . . . .118
1338000G001-500 . . . . . . . .129 1358000G331-004 . . . . . . . .111 1359000G051-004 . . . . . . . .119
1343000G050-006 . . . . . . . .109 1358000G331-005 . . . . . . . .111 1359000G051-045 . . . . . . . .117
1343000G051-021 . . . . . . . .109 1358000G910-002 . . . . . . . .108 1359000G051-500 . . . . . . . .128
1343000G090-001 . . . . . . . .109 1358000G910-003 . . . . . . . .110 1359000G051-501 . . . . . . . .128
1343000G091-006 . . . . . . . 109 1358000G911-014 . . . . . . . .111 1359000G910-002 . . . . . . . .117
1343000G330-006 . . . . . . . .109 1358000G911-059 . . . . . . . .108 1359000G910-003 . . . . . . . .119
1343000G331-011. . . . . . . . 109 1358000G911-061 . . . . . . . .110 1359000G910-004 . . . . . . . .118
1343000G910-003 . . . . . . . . 109 1358000G911-085 . . . . . . . .111 1359000G911-013 . . . . . . . .116
1343000G911-006 . . . . . . . . 109 1358000G920-000 . . . . . . . 110 1359000G911-014 . . . . . . . .117
1343000G920-004 . . . . . . . . 109 1358000G920-003 . . . . . . . .108 1359000G911-015 . . . . . . . .119
1343000G921-006 . . . . . . . . 109 1358000G921-010 . . . . . . . .110 1359000G911-023 . . . . . . . .118
1343000K050-006 . . . . . . . . 109 1358000G921-063 . . . . . . . .108 1359000G920-001 . . . . . . . .117
1343000K051-021 . . . . . . . . 109 1358000G921-500 . . . . . . . .126 1359000G920-002 . . . . . . . .118
1343000K090-001 . . . . . . . . 109 1358000G921-501 . . . . . . . .126 1359000G921-017 . . . . . . . .116
1343000K091-006 . . . . . . . . 109 1358000K050-004 . . . . . . . .110 1359000G921-018 . . . . . . . .116
1343000K330-006 . . . . . . . . 109 1358000K050-005 . . . . . . . .108 1359000G921-019 . . . . . . . .117
1343000K331-011 . . . . . . . . 109 1358000K051-000 . . . . . . . 110 1359000G921-020 . . . . . . . .118
1343000K910-003. . . . . . . . .109 1358000K051-003 . . . . . . . .108 1359000G921-500 . . . . . . . .128

1359000G921-501 . . . . . . 128 1368000G91P-002 . . . . . . 116 1701015N002-000 . . . . . . . 60
1359000K050-002 . . . . . . 119 1368000G91P-003 . . . . . . 116 1701029N000-000 . . . . . . . 60
1359000K050-005 . . . . . . 117 1368000G91P-004 . . . . . . 116 1701029N002-000. . . . . . . . 60
1359000K050-007 . . . . . . 118 1368000G91P-005 . . . . . . 116 1703017N000-000 . . . . . . . 60
1359000K051-004 . . . . . . 119 1368000G91P-006 . . . . . . 116 1703017N002-000. . . . . . . . 60
1359000K051-010 . . . . . . 116 1369000G000-000 . . . . . .113 1703020N000-000 . . . . . . . 60
1359000K051-038 . . . . . . 118 1369000G001-500 . . . . . . 127 1703020N002-000. . . . . . . . 60
1359000K051-045 . . . . . . 117 1369000G821-500 . . . . . . 127 1705015N000-000 . . . . . . . 60
1359000K910-002 . . . . . . 117 1370000G001-500 . . . . . . 127 1705021N000-000 . . . . . . . 60
1359000K910-003 . . . . . . 119 1395000G000-000 . . . . . . .122 1708015N000-000 . . . . . . . 61
1359000K910-004 . . . . . . 118 1395000K000-000. . . . . . . 122 1711014N070-000 . . . . . . . 61
1359000K911-013 . . . . . . 116 1401004N001-000. . . . . . . . 35 1711014N072-000. . . . . . . . 61
1359000K911-014 . . . . . . 117 1401015N001-000. . . . . . . . 35 1713000N072-000. . . . . . . . 62
1359000K911-015 . . . . . . 119 1404004N001-000. . . . . . . . 35 1719017N590-000 . . . . . . . 61
1359000K911-023 . . . . . . 118 1404007N000-000 . . . . . . . 35 1719017N592-000. . . . . . . . 61
1359000K920-001 . . . . . . 117 1408004N001-000. . . . . . . . 36 1719021N590-000 . . . . . . . 61
1359000K920-002 . . . . . . 118 1411004N261-000. . . . . . . . 37 1719021N592-000. . . . . . . . 61
1359000K921-017 . . . . . . 116 1411015N260-000 . . . . . . . 37 1720000N651-003. . . . . . . . 62
1359000K921-018 . . . . . . 116 1413000N331-000. . . . . . . . 37 1720000N652-000 . . . . . . . .62
1359000K921-019 . . . . . . 117 1413000N331-001. . . . . . . . 37 1720000N751-001. . . . . . . . .62
1359000K921-020 . . . . . . 118 1416004N511-000 . . . . . . . 36 1801021N000-000. . . . . . . . 89
1363000G050-001 . . . . . . 120 1423000N331-000 . . . . . . . 38 1808021N000-000. . . . . . . . 89
1363000G920-000 . . . . . .120 1426000N511-000 . . . . . . . 39 1813000N331-000. . . . . . . . 90
1363000K050-002 . . . . . . 120 1463000N330-000 . . . . . . . 37 1815000N330-000. . . . . . . . 90
1363000K920-000. . . . . . .120 1502002A000-000 . . . . . . . .44 1816003N720-000. . . . . . . . 89
1364000G051-015 . . . . . . 112 1502004A000-000. . . . . . . . 44 1816021N721-000. . . . . . . . 89
1364000G051-016 . . . . . . 112 1502017A000-000. . . . . . . . 44 1819003N720-000. . . . . . . . 89
1364000K051-015 . . . . . . 112 1513000A391-000 . . . . . . . 44 1819020N720-000. . . . . . . . 89
1364000K051-016 . . . . . . 112 1516002A510-000 . . . . . . . 44 1820000N728-000. . . . . . . . 90
1366000G051-017 . . . . . . 112 1516004A510-001 . . . . . . . .44 1823000N331-001. . . . . . . . 90
1366000G051-018 . . . . . . 112 1601015N000-000 . . . . . . . 46 1827000N000-000 . . . . . . . .91
1366000G051-019 . . . . . . 112 1601079N001-000 . . . . . . . 46 1828000N000-000 . . . . . . . .91
1366000K051-017 . . . . . . 112 1604004N001-000 . . . . . . . 46 1829000N000-000 . . . . . . . 91
1366000K051-018 . . . . . . 112 1604005N000-000 . . . . . . . 46 1830000N000-000 . . . . . . . .91
1366000K051-019 . . . . . . 112 1604006N000-000 . . . . . . . 46 1838000N000-000 . . . . . . . .91
1367000G001-500 . . . . . . 127 1604079N001-001 . . . . . . . .46 1901004N000-000 . . . . . . . .99
1367000G911-000. . . . . . .113 1605004N001-002 . . . . . . . .46 1901004N000-001. . . . . . . . 99
1367000G91P-000. . . . . . .114 1621000N691-000 . . . . . . . .48 1901004N001-000. . . . . . . . 99
1367000G91P-006 . . . . . . 114 1623000N401-000 . . . . . . . .48 1901015N000-000 . . . . . . . . 99
1367000G91P-020 . . . . . . 114 1627000N000-000 . . . . . . . .49 1901015N001-000 . . . . . . . . 99
1367000G91P-021 . . . . . . 114 1628000N000-000 . . . . . . . .49 1904004N000-000 . . . . . . . . 99
1367000G91P-022 . . . . . . 114 1630000N000-000 . . . . . . . .50 1905015N001-002 . . . . . . . .99
1367000G91P-023 . . . . . . 114 1632000N000-000 . . . . . . . .48 1913000N261-001. . . . . . . 100
1367000G91P-024 . . . . . . 114 1633000N000-000 . . . . . . . .48 1913000N261-002. . . . . . . 100
1367000G91P-025 . . . . . . 114 1634000N001-000 . . . . . . . .49 1913000N331-002. . . . . . . 100
1367000G91P-026 . . . . . . 114 1637000N000-000 . . . . . . . .50 1923000N331-000 . . . . . . . 100
1367000G91P-027 . . . . . . 114 1638000N000-000 . . . . . . . .50 1926000N518-000 . . . . . . . 101
1368000G001-500 . . . . . . 127 1663000N340-000 . . . . . . . .48 1927000N000-000 . . . . . . . 101
1368000G91P-001 . . . . . . 116 1701015N000-000 . . . . . . . .60 1928000N000-00
00 . . . . . . .101

1932000N000-000 . . . . . . . 100 2234000N000-035 . . . . . . . 43 2403037G000-002 . . . . . . . 131

1934000N000-001 . . . . . . . .101 2234000N000-036 . . . . . . . 42 2403037N000-002 . . . . . . . 131
1935000N000-001 . . . . . . . .101 2234000N000-037 . . . . . . . 42 2403038G000-001 . . . . . . . 131
1963000N330-000 . . . . . . . 100 2234000N000-038 . . . . . . . 43 2403038N000-001 . . . . . . . 131
2001070N000-000 . . . . . . . 157 2234000N000-039 . . . . . . . 43 2403100G000-000 . . . . . . . 131
2001099N000-000 . . . . . . . 157 2234000N000-040 . . . . . . . 43 2403100N000-000 . . . . . . . 131
2001235N000-000 . . . . . . . 157 2234000N000-041 . . . . . . . 42 2407037G001-000. . . . . . . 131
2013000N091-002 . . . . . . . .157 2234000N000-042 . . . . . . . 42 2407037N001-000. . . . . . . 131
2016099N591-000. . . . . . . . 157 2234000N000-043 . . . . . . . 43 2407038G001-001 . . . . . . . 131
2016235N591-001 . . . . . . . .157 2234000N000-044 . . . . . . . 43 2407038N001-001 . . . . . . . 131
2020000N621-003 . . . . . . . .157 2234000N000-045 . . . . . . . 42 2407100G001-000. . . . . . . .131
2225000A911-009 . . . . . . . 175 2234000N000-046 . . . . . . . 43 2407100N001-000. . . . . . . .131
2225000K071-002 . . . . . . . .183 2234000N000-047 . . . . . . . 43 2413000G051-000. . . . . . . .132
2225000N331-005 . . . . . . . .181 2234000N000-048 . . . . . . . 42 2413000G911-000. . . . . . . .132
2225000N331-006 . . . . . . . .177 2234000N000-049 . . . . . . . 43 2413000N051-000. . . . . . . .132
2225000N331-008 . . . . . . . .181 2234000N000-050 . . . . . . . 43 2413000N911-000. . . . . . . .132
2225000N401-000 . . . . . . . .180 2234000N000-051 . . . . . . . 42 2419037G681-000. . . . . . . .131
2226000N721-001 . . . . . . . .181 2234000N000-052 . . . . . . . 42 2419037N681-000. . . . . . . .131
2226000Q511-001 . . . . . . . . .96 2234000N000-053 . . . . . . . 43 2419038G681-000. . . . . . . .131
2227000N000-016 . . . . . . . 182 2234000N000-054 . . . . . . . 43 2419038N681-000. . . . . . . .131
2227000N000-003 . . . . . . . 182 2234000N000-055. . . . . . 181 2419100G681-000. . . . . . . .131
2227000N000-004 . . . . . . . 178 2234000N000-065. . . . . . 182 2419100N681-000. . . . . . . .131
2228000A001-029 . . . . . . . .175 2234000N000-069. . . . . . 183 2420000G681-000. . . . . . . .132
2228000N001-002 . . . . . . . 181 2234000N000-078. . . . . . 180 2420000K911-001 . . . . . . . 133
2228000N000-009 . . . . . . . 177 2234000N001-004. . . . . . 182 2420000N681-000. . . . . . . .132
2228000N000-012 . . . . . . . 181 2234000N001-007. . . . . . 182 2421000G911-000. . . . . . . .133
2228000N001-015 . . . . . . . 183 2234000N001-009. . . . . . 181 2422000G681-000. . . . . . . .132
2228000N001-022 . . . . . . . 180 2234000N001-010. . . . . . 178 2422000N681-000. . . . . . . .132
2228000N00M-010 . . . . . . . 181 2234000N001-051. . . . . . 179 2468000G001-000. . . . . . . .133
2234000A001-122 . . . . . . . .175 2234000N001-070. . . . . . 180 2468000N001-000. . . . . . . .133
2234000N000-006 . . . . . . . 177 2234000N001-077. . . . . . 183 2470000G00E-000. . . . . . . .133
2234000N000-007 . . . . . . . 178 2234000N001-078. . . . . . 183 2470000N00E-000. . . . . . . .133
2234000N000-008 . . . . . . . 177 2234000N001-081. . . . . . 183 2502038G001-001 . . . . . . . 134
2234000N000-009 . . . . . . . 178 2234000N001-082. . . . . . 183 2502038N001-001 . . . . . . . 134
2234000N000-010 . . . . . . . 179 2234000N001-100. . . . . . 177 2502045G001-001 . . . . . . . 134
2234000N000-011 . . . . . . . 179 2234000N001-120. . . . . . 183 2502045N001-001 . . . . . . . 134
2234000N000-012 . . . . . . . 182 2234000N001-121. . . . . . 183 2502100G000-001 . . . . . . . 134
2234000N000-014 . . . . . . . . 42 2234000N004-010. . . . . . 178 2502100N000-001 . . . . . . . 134
2234000N000-015 . . . . . . . . 43 2234000N004-011. . . . . . 180 2503037G000-000 . . . . . . .134
2234000N000-017 . . . . . . . . 42 2234000N00M-039. . . . . .182 2503037N000-000 . . . . . . .134
2234000N000-018 . . . . . . . . 42 2234000N331-003. . . . . . 181 2503038G000-000 . . . . . . .134
2234000N000-023 . . . . . . . . 42 2234000Q001-131. . . . . . . 96 2503038N000-000 . . . . . . .134
2234000N000-024 . . . . . . . . 43 2234000Q001-136. . . . . . . 66 2503100G000-000 . . . . . . .134
2234000N000-029 . . . . . . . . 42 2402037G001-000 . . . . . .131 2503100N000-000 . . . . . . .134
2234000N000-030 . . . . . . . . 43 2402037N001-000 . . . . . .131 2507037G001-000. . . . . . . .134
2234000N000-031 . . . . . . . . 42 2402038G001-000 . . . . . .131 2507037N001-000. . . . . . . .134
2234000N000-032 . . . . . . . . 42 2402038N001-000 . . . . . .131 2507038G001-000. . . . . . . .134
2234000N000-033 . . . . . . . . 42 2402100G001-000 . . . . . .131 2507038N001-000. . . . . . . .134
2234000N000-034 . . . . . . . . 43 2402100N001-000 . . . . . .131 2507100G001-000. . . . . . . .134

2507100N001-000. . . . . . . . 134 3527000N001-000 . . . . . . . . . 53 4422000G840-001. . . . . . . . . .155
2513000G051-000. . . . . . . . 135 3801004Q000-001 . . . . . . . . . 93 4444000G628-000 . . . . . . . . . 155
2513000G911-000. . . . . . . . 135 3801015Q000-001 . . . . . . . . . 93 4463000A000-000 . . . . . . . . . 155
2513000N051-000. . . . . . . . 135 3805004Q000-000. . . . . . . . . .93 5003005N001-000 . . . . . . . . . 163
2513000N911-000. . . . . . . . 135 3805006Q000-000. . . . . . . . . .93 5003012N001-000 . . . . . . . . . 163
2519037G681-000. . . . . . . . 134 3805015Q000-000. . . . . . . . . .93 5003013N001-000 . . . . . . . . . 163
2519037N681-000. . . . . . . . 134 3811004Q331-000. . . . . . . . . .94 5013000N331-000 . . . . . . . . . 163
2519038G681-000. . . . . . . . 134 3811015Q331-000. . . . . . . . . .94 5020000N651-000 . . . . . . . . . 163
2519038N681-000. . . . . . . . 134 3813000Q331-000. . . . . . . . . .95 5023000N331-001 . . . . . . . . .163
2519100G681-000. . . . . . . . 134 3816000Q511-002 . . . . . . . . .95 6101099N001-000 . . . . . . . . . 161
2519100N681-000. . . . . . . . 134 3816004Q511-001. . . . . . . . . .94 6102099N001-000 . . . . . . . . . 161
2520000G681-000. . . . . . . . 135 3816015Q511-001. . . . . . . . . .94 6108099N001-000. . . . . . . . . 161
2520000N681-000. . . . . . . . 135 3831000A00A-000. . . . . . . . . .96 6116099N591-000. . . . . . . . . 161
2522000G681-000. . . . . . . . 135 3851000A000-000 . . . . . . . . .96 6120000N651-000. . . . . . . . . 162
2522000N681-000. . . . . . . . 135 3858000Q331-001. . . . . . . . . .95 6126000N591-000. . . . . . . . . 162
2568000G001-000. . . . . . . . 135 3858000Q331-002 . . . . . . . . .95 6128000N000-000 . . . . . . . . . 162
2568000N001-000. . . . . . . . 135 3858000Q331-003 . . . . . . . . .95 6130000N000-000 . . . . . . . . . 162
2570000G00E-000. . . . . . . . 135 4203015Q000-000 . . . . . . . . . 66 6150000N000-000 . . . . . . . . . 162
2570000N00E-000. . . . . . . . 135 4213000Q071-001. . . . . . . . . .66 6158000N13P-000 . . . . . . . . . 162
2601099N000-000. . . . . . . . 158 4217025G673-000 . . . . . . . .165 6169000N13P-000 . . . . . . . . . 162
2601201N000-000 . . . . . . . 158 4217031G673-000 . . . . . . . .165 63-10072-1 . . . . . . . . . . . . . . . .190
2604070N000-000 . . . . . . . 158 4220000G911-000. . . . . . . . . .97 63-10072-2 . . . . . . . . . . . . . . . .190
2604201N000-000 . . . . . . . 158 4258000G051-000. . . . . . . . .165 7501019N005-000. . . . . . . . . . .31
2608070N000-000 . . . . . . . 159 4258000G051-009. . . . . . . . . .97 7501037N005-000. . . . . . . . . . .31
2611201N331-000. . . . . . . . 159 4258000G051-010 . . . . . . . . 165 7503020N000-002 . . . . . . . . . . 31
2616070N511-000. . . . . . . . 159 4258000G921-002 . . . . . . . . 165 7503020N001-000. . . . . . . . . . .31
2616201N511-000. . . . . . . . 159 4258000G921-003 . . . . . . . . 165 7503037N001-000. . . . . . . . . . .31
2620000N511-000. . . . . . . . 159 4258000G921-006 . . . . . . . . . 97 7503108N001-000. . . . . . . . . . .31
2622000N511-000. . . . . . . . 159 4259000K051-000. . . . . . . . . .11 7503279N001-000. . . . . . . . . . .31
2626000N000-000 . . . . . . . 160 4259000K911-005 . . . . . . . . . 11 7507019N000-000 . . . . . . . . . 31
2801000N000-000 . . . . . . . . 40 4259000N911-002 . . . . . . . . . 11 7507037N000-000 . . . . . . . . . 31
2801000N000-001 . . . . . . . . .40 4267000G91P-001 . . . . . . . .164 7513000N091-000. . . . . . . . . . .32
2802002F001-000 . . . . . . . . 40 4401013G000-000 . . . . . . . 154 7513000N331-002 . . . . . . . . . .32
2802002F001-001 . . . . . . . . .40 4401013G005-000. . . . . . . . 154 7516019N595-000. . . . . . . . . . .31
2802012N001-000. . . . . . . . . 40 4401018G000-000 . . . . . . . 154 7516037N595-000. . . . . . . . . . .31
2802012N001-001. . . . . . . . . 40 4401019G005-000. . . . . . . . 154 7520000N651-001. . . . . . . . . . 33
2802021N001-000. . . . . . . . . 40 4401029G005-000. . . . . . . . 154 7521000N621-002 . . . . . . . . . . 33
2802021N001-001. . . . . . . . . 40 4401036G000-000 . . . . . . . 154 7523000N180-000 . . . . . . . . . .32
2802037N001-000 . . . . . . . . 40 4401036G005-000. . . . . . . . 154 7523000N331-001 . . . . . . . . . . 32
2802037N001-001. . . . . . . . . 40 4401043G000-000 . . . . . . . 154 7526000N591-000. . . . . . . . . . .33
2811002N911-000. . . . . . . . . 41 4404015G000-000 . . . . . . . 154 7526000N591-001 . . . . . . . . . . 33
2811004N911-000. . . . . . . . . 41 4404036G000-000 . . . . . . . 154 7527000N001-000 . . . . . . . . . .33
2811015N911-000. . . . . . . . . 41 4408013G000-000 . . . . . . . 154 7528000N001-000 . . . . . . . . . .33
2811017N911-000. . . . . . . . . 41 4408019G000-000 . . . . . . . 154 7529000N000-000 . . . . . . . . . . 33
2811021N911-000. . . . . . . . . 41 4408036G000-000 . . . . . . . 154 7567000N13P-001. . . . . . . . . . .32
2835000N000-000 . . . . . . . . 41 4413000G041-000. . . . . . . . 155 7569000N13P-000 . . . . . . . . . . 32
2835000N000-001 . . . . . . . . .41 4416019G620-000 . . . . . . . 154 9201004A001-000 . . . . . . . . . 167
2838000N000-000 . . . . . . . . 41 4416036G620-000 . . . . . . . 154 9201031A003-000 . . . . . . . . . 167
2838000N000-001 . . . . . . . . .41 4416038G620-000 . . . . . . . 154 9201050A003-002 . . . . . . . . .167

9201079A001-000. . . . . . . . 167 9503038G000-500 . . . . . . . . 64 M22520/5-37 . . . . . . . . . . . 206
9203000A001-000. . . . . . . . 170 9505025G003-500 . . . . . . . . 64 M22520/5-61 . . . . . . . . . . . 206
9203005A001-000. . . . . . . . 167 9507037G001-500 . . . . . . . . 64 M39012/01-0005 . . . . . . . .191
9205005A001-002 . . . . . . . .167 9507038G001-500 . . . . . . . . 64 M39012/01-0015 . . . . . . . .191
9205015A001-000. . . . . . . . 167 9510025G003-500 . . . . . . . . 64 M39012/01-0125 . . . . . . . .191
9205031A003-000. . . . . . . . 167 9510037G000-500 . . . . . . . . 64 M39012/01-0501 . . . . . . . .191
9205050A003-001 . . . . . . . .167 9510038G000-500 . . . . . . . . 64 M39012/01-0502 . . . . . . . .191
9205079A001-001 . . . . . . . .167 9567000G001-500 . . . . . . . . 65 M39012/01-0503 . . . . . . . .191
9207005A001-000. . . . . . . . 167 9567000G001-501 . . . . . . . . 65 M39012/01B0007 . . . . . . . 191
9207015A001-000. . . . . . . . 167 9567000G001-502 . . . . . . . . 65 M39012/01B0008 . . . . . . . 191
9207017A001-000. . . . . . . . 167 9567000G001-503 . . . . . . . . 65 M39012/02-0003 . . . . . . . .191
9208000A001-000. . . . . . . . 170 9568000G001-500 . . . . . . . . 65 M39012/02-0006 . . . . . . . .191
9211000A911-001 . . . . . . . .170 9568000G001-501 . . . . . . . . 65 M39012/02-0101 . . . . . . . .191
9211031A331-000. . . . . . . . 168 9568000G001-502 . . . . . . . . 65 M39012/02-0104 . . . . . . . .192
9211031A911-001 . . . . . . . .168 9569000G001-500 . . . . . . . . 65 M39012/02-0501 . . . . . . . .191
9211050A331-000. . . . . . . . 168 9569000G001-501 . . . . . . . . 65 M39012/02-0502 . . . . . . . .191
9211050A911-001 . . . . . . . .168 9801025G003-500 . . . . . . . . 55 M39012/02-0503 . . . . . . . .191
9213000A911-003 . . . . . . . .171 9803037G000-500 . . . . . . . . 55 M39012/02-0511 . . . . . . . .192
9213000A911-004 . . . . . . . .171 9803038G000-500 . . . . . . . . 55 M39012/02-0512 . . . . . . . .192
9213000A911-010 . . . . . . . .171 9803100G000-500 . . . . . . . . 55 M39012/02-0513 . . . . . . . .192
9216031A911-000 . . . . . . . .169 9805025G003-500 . . . . . . . . 55 M39012/02B0008 . . . . . . 191
9216050A911-000 . . . . . . . .169 9805031G003-500 . . . . . . . . 55 M39012/02B0009 . . . . . . 191
9219005A911-000 . . . . . . . .169 9807037G001-500 . . . . . . . . 55 M39012/03-0101 . . . . . . . .192
9220000A911-000 . . . . . . . .171 9807038G001-500 . . . . . . . . 55 M39012/03-0102 . . . . . . . .192
9223000A911-000 . . . . . . . .173 9807100G001-500 . . . . . . . . 55 M39012/03-0501 . . . . . . . .192
9223000A911-001. . . . . . . . 173 9810037G001-500 . . . . . . . . 56 M39012/03-0502 . . . . . . . .192
9223000A911-002. . . . . . . . 174 9810038G001-500 . . . . . . . . 56 M39012/03-0503 . . . . . . . .192
9223000A911-003. . . . . . . . 173 9810100G001-500 . . . . . . . . 56 M39012/03B0004 . . . . . . 192
9224000A911-000 . . . . . . . .173 9819037G681-500 . . . . . . . . 56 M39012/03B0005 . . . . . . 192
9226000A911-001. . . . . . . . 175 9819038G681-500 . . . . . . . . 56 M39012/04-0001 . . . . . . . .193
9255005A331-000 . . . . . . . .168 9819100G681-500 . . . . . . . . 56 M39012/04-0002 . . . . . . . .193
9255005A911-000 . . . . . . . .168 9820000G911-001 . . . . . . . . 58 M39012/05-0101 . . . . . . . .193
9255015A331-000 . . . . . . . .168 9820000G911-008 . . . . . . . . 58 M39012/16-0101 . . . . . . . .187
9255015A911-000 . . . . . . . .168 9867000G001-500 . . . . . . . . 57 M39012/16-0102 . . . . . . . .187
9258000A331-000 . . . . . . . .172 9867000G001-501 . . . . . . . . 57 M39012/16-0103 . . . . . . . .187
9258000A331-002. . . . . . . . 172 9867000G001-503 . . . . . . . . 57 M39012/16-0111 . . . . . . . .187
9258000A331-003. . . . . . . . 172 9867000G001-504 . . . . . . . . 57 M39012/16-0118 . . . . . . . .187
9258000A331-005. . . . . . . . 172 9867000G91P-500 . . . . . . . . 57 M39012/16-0220 . . . . . . . .187
9258000A331-010. . . . . . . . 172 9868000G001-500 . . . . . . . . 58 M39012/16-0225 . . . . . . . .187
9258000A911-000. . . . . . . . 171 9869000G001-500 . . . . . . . . 58 M39012/17-0101 . . . . . . . .187
9258000A911-006. . . . . . . . 172 9870000G001-500 . . . . . . . . 58 M39012/17-0102 . . . . . . . .187
9258000A911-007. . . . . . . . 172 CW-123A/U . . . . . . . . . . . . . .28 M39012/17-0103 . . . . . . . .187
9259000A331-000. . . . . . . . 174 CW-155A/U . . . . . . . . . . . . . .28 M39012/17-0111 . . . . . . . .187
9259000A331-001. . . . . . . . 174 CW-159/U . . . . . . . . . . . . . . .28 M39012/17-0118 . . . . . . . .187
9259000A331-006. . . . . . . . 174 CW-282/U . . . . . . . . . . . . . . .28 M39012/18-0101 . . . . . . . .187
9259000A331-007. . . . . . . . 174 M22520/5-01 . . . . . . . . . . . 206 M39012/18-0102 . . . . . . . .187
9259000A911-004. . . . . . . . 174 M22520/5-19 . . . . . . . . . . . 206 M39012/18-0103 . . . . . . . .187
9501025G003-500. . . . . . . . . 64 M22520/5-33 . . . . . . . . . . . 206 M39012/18-0111 . . . . . . . .187
9503037G000-500. . . . . . . . . 64 M22520/5-35 . . . . . . . . . . . 206 M39012/18-0118 . . . . . . . .187

M39012/18-0220 . . . . . . . 187 M39012/27-0022 . . . . . . . 201 M39012/55-3128 . . . . . . . 195
M39012/19-0101 . . . . . . . 188 M39012/27-0023 . . . . . . . 201 M39012/55-3129 . . . . . . . 195
M39012/19-0102 . . . . . . . 188 M39012/27-0101 . . . . . . . 201 M39012/55-3130 . . . . . . . 195
M39012/19-0110 . . . . . . . 188 M39012/27-0102 . . . . . . . 201 M39012/56-3006 . . . . . . . 195
M39012/19-0111 . . . . . . . 188 M39012/27-0103 . . . . . . . 201 M39012/56-3007 . . . . . . . 197
M39012/19-0118 . . . . . . . 188 M39012/28-0010 . . . . . . . 201 M39012/56-3008 . . . . . . . 197
M39012/19-0220 . . . . . . . 188 M39012/28-0011 . . . . . . . 201 M39012/56-3009 . . . . . . . 197
M39012/20-0006 . . . . . . . 188 M39012/28-0012 . . . . . . . 201 M39012/56-3025 . . . . . . . 197
M39012/20-0007 . . . . . . . 188 M39012/28-0013 . . . . . . . 201 M39012/56-3026 . . . . . . . 197
M39012/20-0101 . . . . . . . 188 M39012/28-0014 . . . . . . . 201 M39012/56-3027 . . . . . . . 197
M39012/20-0102 . . . . . . . 188 M39012/28-0018 . . . . . . . 201 M39012/56-3028 . . . . . . . 197
M39012/20-0108 . . . . . . . 188 M39012/28-0022 . . . . . . . 201 M39012/56-3029 . . . . . . . 197
M39012/21-0001 . . . . . . . 188 M39012/28-0023 . . . . . . . 201 M39012/56-3030 . . . . . . . 197
M39012/21-0002 . . . . . . . 188 M39012/28-0101 . . . . . . . 201 M39012/56-3106 . . . . . . . 197
M39012/21-0003 . . . . . . . 188 M39012/28-0102 . . . . . . . 201 M39012/56-3107 . . . . . . . 197
M39012/22-0001 . . . . . . . 189 M39012/28-0103 . . . . . . . 201 M39012/56-3108 . . . . . . . 197
M39012/24-0001 . . . . . . . 189 M39012/29-0010 . . . . . . . 202 M39012/56-3109 . . . . . . . 197
M39012/24-0002 . . . . . . . 189 M39012/29-0011 . . . . . . . 202 M39012/56-3125 . . . . . . . 197
M39012/25-0006 . . . . . . . 189 M39012/29-0012 . . . . . . . 202 M39012/56-3126 . . . . . . . 197
M39012/25-0007 . . . . . . . 189 M39012/29-0013 . . . . . . . 202 M39012/56-3127 . . . . . . . 197
M39012/25-0008 . . . . . . . 189 M39012/29-0014 . . . . . . . 202 M39012/56-3128 . . . . . . . 197
M39012/25-0009 . . . . . . . 189 M39012/29-0018 . . . . . . . 202 M39012/56-3129 . . . . . . . 197
M39012/25-0011 . . . . . . . 193 M39012/29-0022 . . . . . . . 202 M39012/56-3130 . . . . . . . 197
M39012/25-0012 . . . . . . . 193 M39012/29-0023 . . . . . . . 202 M39012/57-3006 . . . . . . . 197
M39012/25-0018 . . . . . . . 200 M39012/29-0101 . . . . . . . 202 M39012/57-3007 . . . . . . . 197
M39012/25-0019 . . . . . . . 200 M39012/29-0102 . . . . . . . 202 M39012/57-3008 . . . . . . . 197
M39012/25-0020 . . . . . . . 200 M39012/29-0103 . . . . . . . 202 M39012/57-3009 . . . . . . . 197
M39012/25-0021 . . . . . . . 200 M39012/31-0001 . . . . . . . 202 M39012/57-3025 . . . . . . . 197
M39012/25-3024 . . . . . . . 195 M39012/31-0002 . . . . . . . 202 M39012/57-3026 . . . . . . . 197
M39012/25-3025 . . . . . . . 195 M39012/32-0001 . . . . . . . 203 M39012/57-3027 . . . . . . . 197
M39012/25-3026 . . . . . . . 195 M39012/34-0001 . . . . . . . 203 M39012/57-3028 . . . . . . . 197
M39012/25-3027 . . . . . . . 195 M39012/34-0002 . . . . . . . 203 M39012/57-3029 . . . . . . . 197
M39012/26-0010 . . . . . . . 200 M39012/55-3006 . . . . . . . 195 M39012/57-3030 . . . . . . . 197
M39012/26-0011 . . . . . . . 200 M39012/55-3007 . . . . . . . 195 M39012/58-3006 . . . . . . . 198
M39012/26-0012 . . . . . . . 200 M39012/55-3008 . . . . . . . 195 M39012/58-3007 . . . . . . . 198
M39012/26-0013 . . . . . . . 200 M39012/55-3009 . . . . . . . 195 M39012/58-3008 . . . . . . . 198
M39012/26-0014 . . . . . . . 200 M39012/55-3025 . . . . . . . 195 M39012/58-3009 . . . . . . . 198
M39012/26-0018 . . . . . . . 200 M39012/55-3026 . . . . . . . 195 M39012/58-3025 . . . . . . . 198
M39012/26-0022 . . . . . . . 200 M39012/55-3027 . . . . . . . 195 M39012/58-3026 . . . . . . . 198
M39012/26-0023 . . . . . . . 200 M39012/55-3028 . . . . . . . 195 M39012/58-3027 . . . . . . . 198
M39012/26-0101 . . . . . . . 200 M39012/55-3029 . . . . . . . 195 M39012/58-3028 . . . . . . . 198
M39012/26-0102 . . . . . . . 200 M39012/55-3030 . . . . . . . 195 M39012/58-3029 . . . . . . . 198
M39012/26-0103 . . . . . . . 200 M39012/55-3106 . . . . . . . 195 M39012/58-3030 . . . . . . . 198
M39012/27-0010 . . . . . . . 201 M39012/55-3107 . . . . . . . 195 M39012/59-3006 . . . . . . . 198
M39012/27-0011 . . . . . . . 201 M39012/55-3108 . . . . . . . 195 M39012/59-3007 . . . . . . . 198
M39012/27-0012 . . . . . . . 201 M39012/55-3109 . . . . . . . 195 M39012/59-3008 . . . . . . . 198
M39012/27-0013 . . . . . . . 201 M39012/55-3125 . . . . . . . 195 M39012/59-3009 . . . . . . . 198
M39012/27-0014 . . . . . . . 201 M39012/55-3126 . . . . . . . 195 M39012/59-3025 . . . . . . . 198
M39012/27-0018 . . . . . . . 201 M39012/55-3127 . . . . . . . 195 M39012/59-3026 . . . . . . . 198

M39012/59-3027 . . . . . . . 198 UG-29B/U . . . . . . . . . . . . . 87 UG-422/U . . . . . . . . . . . . . 160

M39012/59-3028 . . . . . . . 198 UG-306A/U . . . . . . . . . . . . 30 UG-423B/U . . . . . . . . . . . . 159
M39012/59-3029 . . . . . . . 198 UG-306B/U . . . . . . . . . . . . . 30 UG-427C/U . . . . . . . . . . . . 47
M39012/59-3030 . . . . . . . 198 UG-309/U . . . . . . . . . . . . . 177 UG-447/U . . . . . . . . . . . . . 22
M39012/60-3001 . . . . . . . 199 UG-30D/U . . . . . . . . . . . . . 87 UG-491B/U . . . . . . . . . . . . . 30
M39012/60-3002 . . . . . . . 199 UG-30E/U . . . . . . . . . . . . . . 87 UG-492A/U . . . . . . . . . . . . 29
M39012/61-3001 . . . . . . . 199 UG-573B/U . . . . . . . . . . . . . 35 UG-492C/U . . . . . . . . . . . . 29
M39012/61-3002 . . . . . . . 199 UG-57B/U . . . . . . . . . . . . . 87 UG-492D/U . . . . . . . . . . . . 29
M55339/01-00001 . . . . . . 204 UG-58A/U . . . . . . . . . . . . . 79 UG-493A/U. . . . . . . . . . . . 160
M55339/03-00027 . . . . . . 194 UG-59B/U . . . . . . . . . . . . . 46 UG-494B/U . . . . . . . . . . . . . 46
M55339/04-00030 . . . . . . 194 UG-59E/U . . . . . . . . . . . . . . 46 UG-495D/U . . . . . . . . . . . . 46
M55339/05-00057 . . . . . . 194 UG-60B/U . . . . . . . . . . . . . 47 UG-496/U . . . . . . . . . . . . . 48
M55339/06-00001 . . . . . . 194 UG-60E/U . . . . . . . . . . . . . . 47 UG-532A/U . . . . . . . . . . . . 52
M55339/06-00028 . . . . . . 194 UG-61B/U . . . . . . . . . . . . . 47 UG-533B/U . . . . . . . . . . . . . 53
M55339/07-00029 . . . . . . 194 UG-61E/U . . . . . . . . . . . . . . 47 UG-534B/U . . . . . . . . . . . . . 53
M55339/13-00492 . . . . . . 190 UG-83B/U. . . . . . . . . . . . . 181 UG-535/U . . . . . . . . . . . . . 23
M55339/14-00306 . . . . . . 190 UG-88/U . . . . . . . . . . . . . . 13 UG-536B/U . . . . . . . . . . . . . 68
M55339/15-00491 . . . . . . 190 UG-88C/U . . . . . . . . . . . . . 13 UG-536C/U . . . . . . . . . . . . 68
M55339/16-00914 . . . . . . 190 UG-88E/U . . . . . . . . . . . . . . 13 UG-556B/U . . . . . . . . . . . . . 74
M55339/17-00001 . . . . . . 190 UG-89C/U . . . . . . . . . . . . . 17 UG-557A/U . . . . . . . . . . . . 68
M55339/17-00002 . . . . . . 190 UG-107B/U. . . . . . . . . . . . . 88 UG-564/U . . . . . . . . . . . . . 179
M55339/17-00274 . . . . . . 190 UG-146A/U. . . . . . . . . . . . 182 UG-565A/U. . . . . . . . . . . . 179
M55339/18-01034 . . . . . . 204 UG-154B/U. . . . . . . . . . . . . 52 UG-566A/U . . . . . . . . . . . . 39
M55339/20-00201 . . . . . . 204 UG-157B/U. . . . . . . . . . . . . 53 UG-567A/U . . . . . . . . . . . . 39
M55339/24-00335 . . . . . . 204 UG-160D/U . . . . . . . . . . . . 74 UG-568/U . . . . . . . . . . . . . 37
M55339/25-00606 . . . . . . 204 UG-185/U . . . . . . . . . . . . . 22 UG-569A/U . . . . . . . . . . . . 38
M55339/49-00349 . . . . . . 204 UG-201A/U. . . . . . . . . . . . 177 UG-570A/U . . . . . . . . . . . . 36
MX-554/U . . . . . . . . . . . . . 28 UG-202A/U . . . . . . . . . . . . 88 UG-571A/U . . . . . . . . . . . . 37
MX-554A/U . . . . . . . . . . . . 28 UG-203/U . . . . . . . . . . . . . 163 UG-572A/U . . . . . . . . . . . . 36
MX-913/U . . . . . . . . . . . . . 86 UG-204A/U . . . . . . . . . . . . 68 UG-593A/U . . . . . . . . . . . . 77
MX-1142A/U . . . . . . . . . . . 39 UG-255A/U. . . . . . . . . . . . 178 UG-594B/U . . . . . . . . . . . . . 71
MX-1143A/U . . . . . . . . . . . 39 UG-260/U . . . . . . . . . . . . . 13 UG-602A/U . . . . . . . . . . . . 72
PL-259A . . . . . . . . . . . . . . 163 UG-260B/U . . . . . . . . . . . . . 13 UG-603A/U . . . . . . . . . . . . 68
UG-18E/U . . . . . . . . . . . . . . 68 UG-260D/U . . . . . . . . . . . . 13 UG-606/U . . . . . . . . . . . . . 177
UG-20E/U . . . . . . . . . . . . . . 72 UG-261C/U . . . . . . . . . . . . 17 UG-624/U . . . . . . . . . . . . . 18
UG-212C/U . . . . . . . . . . . . 50 UG-262C/U . . . . . . . . . . . . 20 UG-625B/U . . . . . . . . . . . . . 24
UG-216B/U . . . . . . . . . . . . . 53 UG-273/U . . . . . . . . . . . . . 177 UG-626B/U . . . . . . . . . . . . . 35
UG-21B/U . . . . . . . . . . . . . 68 UG-274A/U . . . . . . . . . . . . 30 UG-627B/U . . . . . . . . . . . . . 35
UG-21D/U . . . . . . . . . . . . . 68 UG-274B/U . . . . . . . . . . . . . 30 UG-628A/U . . . . . . . . . . . . 35
UG-21E/U . . . . . . . . . . . . . . 68 UG-274C/U . . . . . . . . . . . . 30 UG-629A/U . . . . . . . . . . . . 37
UG-21G/U . . . . . . . . . . . . . 68 UG-290A/U . . . . . . . . . . . . 22 UG-630A/U . . . . . . . . . . . . 36
UG-220B/U . . . . . . . . . . . . . 53 UG-291C/U . . . . . . . . . . . . 20 UG-631A/U . . . . . . . . . . . . 36
UG-22D/U . . . . . . . . . . . . . 77 UG-333C/U . . . . . . . . . . . . 47 UG-632A/U . . . . . . . . . . . . 36
UG-22F/U . . . . . . . . . . . . . . 77 UG-335A/U. . . . . . . . . . . . 178 UG-633A/U . . . . . . . . . . . . 36
UG-23D/U . . . . . . . . . . . . . 72 UG-349B/U. . . . . . . . . . . . 178 UG-634/U . . . . . . . . . . . . . 38
UG-23F/U . . . . . . . . . . . . . . 72 UG-352/U . . . . . . . . . . . . . 52 UG-635/U . . . . . . . . . . . . . 178
UG-27C/U . . . . . . . . . . . . . 88 UG-352B/U . . . . . . . . . . . . . 52 UG-636A/U. . . . . . . . . . . . 177
UG-27D/U . . . . . . . . . . . . . 88 UG-414A/U . . . . . . . . . . . . 29 UG-637/U . . . . . . . . . . . . . 179
UG-28A/U . . . . . . . . . . . . . 88 UG-421B/U. . . . . . . . . . . . 158 UG-642A/U . . . . . . . . . . . . 39

UG-643/U . . . . . . . . . . . . . 39 UG-927B/U . . . . . . . . . . . . . 47 UG-1095C/U . . . . . . . . . . . . 77

UG-657/U . . . . . . . . . . . . . 24 UG-931/U . . . . . . . . . . . . . 62 UG-1098/U . . . . . . . . . . . . . 24
UG-657A/U . . . . . . . . . . . . 24 UG-932A/U . . . . . . . . . . . . 60 UG-1098A/U. . . . . . . . . . . . 24
UG-680/U . . . . . . . . . . . . . 84 UG-937A/U . . . . . . . . . . . . 36 UG-1104A/U. . . . . . . . . . . . 23
UG-680A/U . . . . . . . . . . . . 84 UG-938A/U . . . . . . . . . . . . 37 UG-1107/U . . . . . . . . . . . . 180
UG-703A/U . . . . . . . . . . . . 179 UG-940B/U . . . . . . . . . . . . . 72 UG-1108/U . . . . . . . . . . . . 180
UG-704B/U . . . . . . . . . . . . . 36 UG-941B/U . . . . . . . . . . . . . 68 UG-1109/U . . . . . . . . . . . . . 50
UG-706A/U . . . . . . . . . . . . 38 UG-943B/U . . . . . . . . . . . . . 35 UG-1111/U . . . . . . . . . . . . . 95
UG-707A/U . . . . . . . . . . . . 35 UG-944A/U . . . . . . . . . . . . 36 UG-1132A/U. . . . . . . . . . . . 94
UG-709B/U . . . . . . . . . . . . . 35 UG-945B/U . . . . . . . . . . . . . 35 UG-1138A/U. . . . . . . . . . . . 39
UG-710B/U . . . . . . . . . . . . . 35 UG-94A/U . . . . . . . . . . . . . 89 UG-1144/U . . . . . . . . . . . . . 96
UG-909/U . . . . . . . . . . . . . 18 UG-959A/U . . . . . . . . . . . . 13 UG-1148/U . . . . . . . . . . . . . 46
UG-909A/U . . . . . . . . . . . . 18 UG-95A/U . . . . . . . . . . . . . 89 UG-1174/U . . . . . . . . . . . . . 24
UG-909B/U . . . . . . . . . . . . . 18 UG-961A/U . . . . . . . . . . . . 61 UG-1185/U . . . . . . . . . . . . . 68
UG-910/U . . . . . . . . . . . . . 18 UG-968B/U . . . . . . . . . . . . . 93 UG-1185A/U. . . . . . . . . . . . 68
UG-910A/U . . . . . . . . . . . . 18 UG-972B/U . . . . . . . . . . . . . 94 UG-1186/U . . . . . . . . . . . . . 72
UG-910B/U . . . . . . . . . . . . . 18 UG-981/U . . . . . . . . . . . . . 160 UG-1186A/U. . . . . . . . . . . . 72
UG-911A/U . . . . . . . . . . . . 24 UG-997A/U . . . . . . . . . . . . 82 UG-1187/U . . . . . . . . . . . . . 77
UG-912/U . . . . . . . . . . . . . 24 UG-1016A/U. . . . . . . . . . . . 61 UG-1187A/U. . . . . . . . . . . . 77
UG-912A/U . . . . . . . . . . . . 24 UG-1019A/U. . . . . . . . . . . . 49 UG-1213/U . . . . . . . . . . . . . 46
UG-913/U . . . . . . . . . . . . . 15 UG-1033C/U . . . . . . . . . . . 13 UG-1214/U . . . . . . . . . . . . . 47
UG-913A/U . . . . . . . . . . . . 15 UG-1034/U . . . . . . . . . . . . 178 UG-1365/U . . . . . . . . . . . . 155
UG-914/U . . . . . . . . . . . . . 29 UG-1094/U . . . . . . . . . . . . . 24 UG-1366/U . . . . . . . . . . . . 154
UG-925B/U . . . . . . . . . . . . . 46 UG-1094A/U. . . . . . . . . . . . 24 UG-1412/U . . . . . . . . . . . . 154
UG-926A/U . . . . . . . . . . . . 46 UG-1095B/U. . . . . . . . . . . . 77 UG-1413/U . . . . . . . . . . . . 154

Customized Connectors
We encourage our customers to take the same white-board approach to their design considerations as we use. Whether it’s an upfront design,
specialized
rs to fully, or
partially, customize products and solutions. Our specialized services include passive intermodulation (PIM) optimization, as well as
customization for medical, space or harsh environments. When customer requirements call for enhanced electrical and mechanical
We're Approachable
When we say we're approachable here at Delta, it means that our entire team is available to
you from our drafters, application engineers, design engineers, and even the Director of
Engineering, Bryan Miceli. Collaborating with our engineering team allows you to design
give us a call.
Virtual Design Review Product Value Integration
Application engineering, design consultation Delta has the resources to provide a true An order is not complete until customers
and collaboration, 2D and 3D modeling to value proposition for customers that are
ANSYS® HFSS models are the tools we use in looking beyond interconnect. Vertical part of the overall design process, we verify
our process to capture and propose a Virtual and validate. From review of application
Design before move to the next phase. It manufacturing allow Delta to think three notes, to electrical, mechanical and
allows you to provide the necessary back dimensionally eliminating boundaries. environmental testing. Delta manages the
up data to support your decision making From new machine implementation, to process every step of the way. Experience
process. Let Delta take this on our shoulders. second tier operations such as integrated
connector housings. Let Delta look deeper
and help you implement Product Value
Integration.

Technical Information
Definitions
Mating Ends and Body Styles
Plug: The connector in a mating pair which has the active mating mechanism (rotating coupling nut, spring lock, etc.).
Jack: The connector in a mating pair which has the passive mating mechanism (bayonet studs, grooves for spring locks,
external threads, etc.).
Receptacle: A connector which is attached to a bulkhead, panel, or component housing and does not accept coaxial cable.
Dummy Receptacle: An empty receptacle body (no contact or insulator) used to secure a plug when the plug is not is use.
Resistive Termination (dummy load): A connector incorporating a resistor between the center contact and
the outer body; used to simulate a load within a circuit.
Mounting Styles
Bulkhead mount: Threaded body for insertion through a single hole in a panel; secured by hex nut.
Panel mount: Square or rectangular flange, with mounting hole to secure flange to panel with screws, or with nuts and bolts.
PressMount: Round knurled body for mounting by pressing into a round hole in panel.
Note: “PLUG” or “JACK” should always be used to define mating end, not contact gender—
some series have female contacts in plugs and male contacts in jacks as the standard configuration.
Cable Connector Configuration Examples

Mating Ends and Body Styles Cable Attachment Methods:
Straight cable jack Refer to these assembly procedures for details
Straight cable plug of the specified cable attachment method.
Flexible Cables:
Bulkhead mount Crimp: See Assembly Procedure B.
Right angle cable plug cable jack Heli-Grip: See Assembly Procedure E.
MIL clamp: See Assembly Procedure A.
Semi-Rigid Cables:
Panel mount Direct solder: See Assembly Procedure H.
cable jack Solder-clamp: See Assembly Procedure F.
Receptacle Configuration Examples

M o un t in g S t y le s C o n t a ct Te r m i n a t i o n S t y l e s
Straight P.C. board

Bulkhead mount jack receptacle jack receptacle
Post contact Slotted contact
(shown with extended insulator) (shown with flush insulator)
Panel mount jack receptacle
Right angle P.C. board Solder pot contact Tab contact

PressMount jack receptacle jack receptacle (shown with extended insulator) (shown with flush insulator)
Adapter Configuration Examples

Straight jack-jack adapter Straight jack-jack
panel mount adapter
Straight plug-plug
adapter
Straight jack-jack
Right angle Tee adapter,
Straight jack-plug bulkhead mount
jack-plug adapter jack-plug-jack
adapter adapter

Create.
Collaborate.
Connect.

Experience the Delta Difference
Delta Electronics is a leading global provider of innovative RF, microwave and
millimeter wave interconnect solutions. We’re proud to deliver a world-class
customer experience – what we call the Delta Difference – by focusing on four
key areas: Purpose, Process, People, and Products/Solutions.
Purpose
The products we make keep people safe, connected, and
informed every day, in every type of environment. Knowing
that our work makes a difference to people in mission-critical
situations around the world gives Delta a strong sense of
purpose and pride that translates into exceptional customer
service and ingenuity.
Process
For over 60 years, Delta has embraced advanced technologies
and pioneered new approaches to precision manufacturing.
Today, our process brings together lean manufacturing and
vertical integration to ensure we have total control over
manufacturing and the plating processes. This allows us to deliver
truly customized solutions, while yielding significant cost-savings
and quick turn to market.
People
We truly care about our customers, and take deep pride in finding
creative solutions to their challenges. We invite all our customers
to visit one of our facilities and meet the talented engineers and
skilled craftspeople who set Delta apart from the crowd.
Products & Solutions

Delta offers a full range of RF, microwave and millimeter wave
solutions that range from DC – 65 GHz and beyond, as well as
customized solutions, including gang mounted interconnect
permutations and connectorized integrated housings.

Our Markets
From avionics to audio, radar to robotics, Delta delivers precision interconnect and
innovative solutions to a broad range of industries where reliability, performance, and
durability are of paramount importance. Delta products are found in mission-critical
systems across our nation’s armed services, and platforms including homeland security,
border control and NATO.
Aerospace Broadcast/Audio
From take-off to landing, this It’s not what you see and hear,
high reliability market requires but how you see and hear it.
a higher degree of engineering From the newsroom to the
and precision component classroom, the studio or your
solutions. Delta continues to personal devices, and on any
evolve with these technologies given Sunday, Delta connects.
because we know lives depend
on our product.
Communications Industrial
Civil radios, military and Renewable energy and
commercial radar platforms, nuclear power, automation,
telecommunication and and robotics – Delta
antenna technology. empowers innovation
Delta creates innovative through creativity which
manufacturing solutions allows Delta to innovate
to support these critical and collaborate with you.
applications.
Medical Military
Diagnostics, detection, imagery Mission-critical systems
and implant devices require require the skill set to flex and
precise component design and diversify in an ever-changing
development. Experience the field of operations. Delta’s
care associated with how the flexible manufacturing and
Delta people collaborate. assembly systems can change
seamlessly, when needed.
Test/Measurement Transportation
Bench, production and Automotive, rail and shipboard
general electrical test and communications require
measurement require repetitive, unparalleled,
precision adapters and test uninterrupted service. This is
cables to quantify electrical what you can expect when
performance. Let Delta engaging Delta. Experience
evaluate your needs. the Delta Difference.

Our Capabilities
Delta offers true vertical integration transforming raw materials
into fully finished product, including plating and assembly, on
site. Having full control over all stages of the manufacturing
processes allows us to provide our customers with the highest
level of quality, and makes us agile, efficient, and highly
adaptive. For our customers, this means cost effective, flexible
manufacturing solutions in an ever-changing marketplace.
Our Services include:

u Application engineering
u Design consultation and collaboration
u 2D and 3D modeling
u ANSYS® HFSS models
u Precision CNC Turning and Milling
u Heat Treating
u Electroplating, passivation, pre-tinning
u Cable assemblies, transmission lines
and related assemblies
u Integrated connectorized housings
Specialized Services
We encourage our customers to take the same
white-board approach to their design considerations
as we use. Whether it’s an upfront design, a product
update, performance enhancements, or fixing any
irregularities, you can rely on Delta to adapt and
offer solutions and specialized services. From
modified dielectrics and pin lengths, to material
and plating specifications, Delta works closely
with our customers to fully, or partially, customize
products and solutions. Our specialized services
include passive intermodulation (PIM) optimization,
as well as customization for medical, space or harsh
environments. When customer requirements call for
enhanced electrical and mechanical performance
requirements, Delta delivers the difference.
Frequency Spectrum
Delta offers a full range of interconnect products from DC – 65 GHz and beyond.
50 MHz 500 MHz 1 GHz 4 GHz 6 GHz 7.5 GHz 10 GHz 11 GHz 14 GHz 18 GHz 22 GHz 26 GHz 27 GHz 28 GHz 40 GHz 65 GHz

A US Company With Global Operations
Delta Electronic Manufacturing Corp.’s Global Headquarters in Beverly, MA is a vertically
integrated manufacturing facility that features an automated plating line. Globally, Delta has
a world-class manufacturing facility in Nanjing, China that mirrors our US manufacturing
processes and equipment to ensure the highest quality and consistency of product. In
addition, we have a strategic partnership in Taiwan that is also vertically integrated with its
own plating line. Lean Manufacturing is the cornerstone of our operations worldwide.
USA Headquarters: Beverly MA China: Nanjing Taiwan: Kaohsiung
AS9100 / ISO9001 DFARS ROHS ITAR JCP

QMS CERTIFIED COMPLIANT COMPLIANT COMPLIANT REGISTERED
978-927-1060 [email protected] www.deltarf.com
Delta Electronics Manufacturing Corporation, PO Box 53, 416 Cabot Street Beverly, MA 01915-0053 USA

Ordering & Warranty Information
Warranty
We warrant our parts to be free of defects and workmanship for one year from purchase. During that time we will repair or replace (at our option)
er’s, or military
installation costs.
No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. The terms of the applicable
warranty or warranties, as the case may be, as set forth herein are the sole and exclusive warranty terms that shall have any
any product order, resulting from the quotation and such terms and in lieu of all other warranties, expressed or implied, including the implied
Returns
Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival.
Restocking charges will be determined prior to issusnce of Return Authorization. All claims for shortages must be made within 30 days of
receipt by customer.
Ordering Information
or to sale.
Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing.
Copyright, Trademarks, & Patents

Entire contents copyright 2017, Delta Electronics Manufacturing Corporation. Reproduction rights are hereby granted for, and sp
urchasing procedures,
by Delta customers only.
Heli-Grip® , PressMount® , and Global Manufacturer logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents
.
Delta Electronics Manufacturing Corporation

416 Cabot Street, P.O. Box 53
Beverly, MA 01915
FSCM/CAGE 00795

Delta Electronics Mfg. Corp.
www.deltarf.com
978-927-1060
[email protected]
PO Box 53
416 Cabot St.
Beverly, MA 01915

Deltacat 2021

Uploaded by

Copyright:

Available Formats

Deltacat 2021

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Deltacat 2021

Uploaded by

Copyright:

Available Formats

Catalog Navigation Guide

BNC Cable Jacks

Panel Jack - Military Clamp for Flexible Cable

Cable Dimensions Mounting Plating Assembly

Click here to jump to dimensions Click here to jump to the cable

Click here to jump to a guide to Delta cable groups.

2 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Fidelity+ VITA 67 Gang Mounts Plating

Capabilities MCX & MMCX MHF / U.FL SSMC

Mil-Spec 4.1 / 9.5 SMK SMA 26.5 & 27.0

SMP & SMPM Connector Saver

1 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

BNC Cable Jacks

Panel Jack - Military Clamp for Flexible Cable

Cable Dimensions Mounting Plating Assembly

Click here to jump to dimensions Click here to jump to the cable

Click here to jump to a guide to Delta cable groups.

2 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

3 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Plug Jack Plug Jack C P lug .76 Ja c k

SMA Plug Jack Plug Jack

SMB P lug .25 Ja c k

.234 hex .190–32 thread

TPS Plug .39 Jack P l u gTPS 1.0 Ja c k

MQD (Mini QDS)

Plug .69 Jack 3/4 –20 thread

MHV P lug .89 Ja c k

7/16 –28 thread

More on next page

Connector Size Comparison (All shown actual size)

5 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

About Delta’s Customer-Driven Design

Plating Options for Economy and Performance

N Panel Receptacles With One-Piece Bodies

Our in-house machining capability now includes production of type N

Polarized TNC Connectors Prevent Mismating

6 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Downloaded from Arrow.com.

Flange Sizes and Available Interfaces

.102 dia. typ.

.125 dia. typ.

.125 dia. typ.

7 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Delta Press Mount Receptacles

Standard Press Mount Receptacles

BNC jack (page 27) BNC plug (page 27)

N jack (page 85) N plug (page 85)

SMA plug (page 115)

TNC jack (page 147) TNC plug (page 147)

7/16 jack (page 171) 7/16 plug (page 173)

8 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 [email protected]

Heli-Grip - Cable Attachment for Flexible Cable

Backnut; cone/contact/ Cable assembled to (Proportions altered to illustrate detail)

Standard Heli-Grip Configurations

Straight plug—page 14 Straight plug—page 138

Right angle plug—page 16 Straight jack—page 73 Right angle plug—page 140

Straight jack—page 17 Straight jack—page 141

Bulkhead jack—page 19 Bulkhead jack—page 142

Panel jack—page 21 Panel jack—page 77 Panel jack—page 143