Salcomix Painting Manual

Salcomix Painting Manual
Universal and flexible paint systems
05/2015 Compact
Technical Information 1.3
General details
Product list
Undercoat Material Hardener Thinner Shelf Life*

Body Filler
103 BOF-UPE, GK03-2800
Salcomix Non Ferro Body Filler SB48-3800 365 days
VOC compliant acc. 2004/42/IIB
Primer
117 PRM-CPO, GK17-1700
730 days
Salcomix 1K Plastic Primer
SV12-0360
261 PRM-PVB, GL60-1370
SV13-0732 730 days
1K Wash Primer, lightgrey
SV13-0701
260 PRM-PVB, GL60-7035 SV13-0732
2K Wash Primer, grey SC10-0710 SV13-0701 545 days
VOC compliant acc. 2004/42/IIB SV15-0339
260 PRM-PVB, GL60-9010 SV13-0732
2K Wash Primer, white SC10-0710 SV13-0701 545 days
Primer Filler
SV12-0360
304 PRM-EE, GK15-1301
SV13-0732 365 days
1K Epoxy Ester Primer Filler
SV13-0701
SV12-0360
306 PRM-EE, GK15-1670
SV13-0732 730 days
1K Universal Primer Filler
SV13-0701
SV12-0360
302 PRM-AKD, GK11-1302
SV13-0732 365 days
1K Alkyd Primer Filler
SV13-0701
SV12-0360
308 PRM-AKD, GK11-1370
SV13-0732 365 days
SV13-0701
305 PRM-AKD, GK11-7305 SV12-0360
1K Alkyd Universal Primer Filler, grey SV13-0732 365 days
305 PRM-AKD, GK11-9305 SV12-0360
1K Alkyd Universal Primer Filler, white SV13-0732 365 days
BASF Coatings GmbH May 2015

Glasuritstraße 1 | 48165 Münster
Germany
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect
processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests;
neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions,
drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only; they may change without prior
information and do not constitute the agreed contractual quality of the products (product specification). The latest version supersedes all
previous versions. You can obtain the latest version from our website at www.salcomix.com or directly from your sales partner. It is the
responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed.
General details
Product list

Primer Filler
307 PRM-AKD, GB16-1307
1K HS Steel Primer, beige GK69-2907 545 days
524 PRM-EPX, GK15-2300 SC65-0731
SV32-0482 545 days
2K Epoxy Primer Filler SC65-0703
524 PRM-EPX, GL62-7610
SC65-0731
2K Epoxy Primer Filler, grey SV32-0482 545 days
SC65-0703
524 PRM-EPX, GL62-7621
SC65-0731
2K Epoxy Primer Filler, white SV32-0482 545 days
SC65-0703
528 PRM-EPX, GL60-7670
SC65-0712 SV32-0482 730 days
2K Epoxy High Build Primer Filler
529 PRM-EPX, GL60-7671
SC65-0731 SV32-0482 730 days
2K Epoxy Primer Filler Fast
511 PRM-EPX, GL62-7611
SC65-0703 SV32-0482 365 days
2K EP Zinc Rich Primer, grey
512 PRM-EPX, GL62-7612
2K EP Zinc Rich Primer, green SC65-0781 SV32-0482 365 days
514 PRM-EPX, GL62-7614
SC65-0714 SV32-0482 730 days
2K Iron Mica Primer
515 PRM-EPX, GL62-7615
SC65-0782 SV32-0482 365 days
2K EP Zinc Rich Primer, grey
SV13-0732
682 PRM-PUR, GK14-2301 SC29-0863
SV13-0701 730 days
2K PUR Primer SC27-0500
SV15-0339
SV13-0732
682 PRM-PUR, GK14-2703 SC29-0863
SV13-0701 730 days
2K PUR Primer, grey SC27-0500
SV15-0339
SC29-0863 SV13-0732
684 PRM-PUR, GK14-2370
SC29-0823 SV13-0701 730 days
2K HS PUR Primer, grey
SC27-0500 SV15-0339

Germany
General details
Product list

Primer Surfacer
685 PRM-PUR, GK14-2705 SV13-0732
SC29-0863
MS Surfacer (Sanding Filler) SV13-0701 730 days
SC27-0500
Topcoats Hardener Thinner Shelf Life*

1K Alkyd Topcoats
309 TPC-AKD, GK41-1102 SV12-0360
1K Alkyd Topcoat, glossy SV13-0732 365 days
direct adhesion on steel SV13-0701
320 TPC-AKD SV12-0360
GK41-1108 / GK41-1404 FW SV13-0732 425 days
1K Alkyd Topcoat, glossy SV13-0701
321 TPC-AKD SV12-0360
GK41-1201 / GK41-1501 FW SV13-0732 365 days
1K Alkyd Topcoat, semi-glossy SV13-0701
326 TPC-AKD SV12-0360
GK41-1109 / GK41-1110 FW SV13-0732 545 days
1K Alkyd Topcoat, glossy SV13-0701
328 TPC-AKD
SV12-0360
GK41-1205 / GK41-1505 FW
SV13-0732 730 days
1K Alkyd Topcoat, semi-glossy
SV13-0701
direct adhesion on steel
2K Epoxy Topcoats
525 TPC-EPX, GK45-2103 SC65-0703
SV32-0482 730 days
2K Epoxy Topcoat, glossy SC65-0731
526 TPC-EPX, GK45-2204 SC65-0703
SV32-0482 730 days
2K Epoxy Topcoat, semi-glossy SC65-0731
595 TPC-EPX, GK45-2201
SC65-0731
2K Epoxy Textured Topcoat, semi-glossy SV32-0482 545 days
SC65-0810
direct adhesion

Germany
General details
Product list

2K PUR Topcoats
648 TPC-PUR SC29-0863 SV13-0732

GK44-2101 / GK44-2402 FW SC29-0885 SV13-0701 1095 days
2K PU Topcoat, glossy SC27-0500* SV15-0339
650 TPC-PUR SV13-0732

SC29-0863
GK44-2202 / GK44-2502 FW SV13-0701 730 days
SC27-0500*
2K PU Topcoat, semi-glossy SV15-0339
656 TPC-PUR SV13-0732

SC29-0844
GK44-2103 / GK44-2403 FW SV13-0701 730 days
SC27-0500*
2K PU Topcoat, glossy SV15-0339
2K Acrylic Topcoats
603 TPC-ACR SC29-0863 SV13-0732
GK46-2103 / GK46-2403 FW SC29-0865 SV13-0701 1095 days
2K Acrylic Topcoat, glossy SC29-0885 SV15-0339
605 TPC-ACR SC29-0865 SV13-0732
GK46-2105 / GK46-2405 FW SC29-0885 SV13-0701
2K Acrylic Topcoat, glossy SC29-0823 SV15-0339
729 TPC-ACR
SV13-0732
GK46-2104 / GK46-2404 FW SC29-0863
SV13-0701 1095 days
2K Acrylic Topcoat, glossy SC29-0885
SV15-0339
direct adhesion on metal, plastics
730 TPC-ACR
SV13-0732
GK46-2106 / GK46-2506 FW
SC29-0730 SV13-0701 730 Tage
2K Acrylic Topcoat, semi-glossy
SV15-0339
direct adhesion on metal
732 TPC-ACR
SV13-0732
GK46-2304 / GK46-2604 FW SC29-0863
SV13-0701 730 days
2K Acrylic Topcoat, matt SC29-0885
SV15-0339
direct adhesion on metal, plastics
821 TPC-ACR
SC29-0863 SV13-0732
GK46-2203 / GK46-2502 FW
SC29-0844 SV13-0701 730 days
SC26-0823 SV15-0339
textured or smooth

Germany
General details
Product list

2K Acrylic Topcoats
825 TPC-AC
SC29-0863 SV13-0732
GK46-2205 / GK46-2505 FW
SC29-0885 SV13-0701 730 Tage
SC29-0823 SV15-0339
textured or smooth
2K VOC Topcoats
900 TPC-ACR, VOC
SV13-0732
GK46-2100 / GK46-2101 FW
SC29-0331 SV13-0701 730 days
2K Acrylic Topcoat, glossy
SV15-0339
901 TPC-ACR, VOC
GK46-2400 / GK46-2401 FW SV13-0732
2K Acrylic Topcoat, semiglossy SC29-0331 SV13-0701 730 days
smooth or textured SV15-0339
902 TPC-ACR, VOC
GK46-2107 / GK46-2407 FW SV13-0701
SC29-0823 730 Tage
2K Acrylic Topcoat, glossy SV15-0339
VOC Konform gem. 2004/42/IIB
1K Basecoat
SV13-0732
850 BCT-MPS, GK39-2301
SV13-0701 730 days
Basecoat
SV15-0339
Clearcoat
SV13-0732
860 CC-ACR, GK56-2103
SC26-0200 SV13-0701 1095 days
Ergoclear 2K Clear
SV15-0339
SV13-0732
860 CC-ACR, GK56-2303
SC26-0200 SV13-0701 730 days
Ergomatt 2K Clear
SV15-0339
*Hardener SC27-0500 is not recommended for topcoats as chemical and

weather resistivity is less in performance

Germany
General details
Product list
Additional products Code Shelf Life*

Additives
Salcomix Brush and Roll Additive GK69-0903 1095 days
Salcomix Plasticiser GK69-2910 730 days
Salcomix Salcomat 2 GJ50-0004 365 days
Salcomix Texture Paste GJ50-0032 1095 days
Salcomix Activator Plus GK69-2911-0111 730 days
Salcomix Thickener GJ50-0067 1095 days
Salcomix TXT Flow GJ50-0030 1095 days
Salcomix Plate like GJ50-7001 1095 days
Salcomix Airless Additive GK69-0901 1095 days
Salcomix 1K HS Steel Primer Activator GK69-2907 365 days
Salcomix E-Static-Additive GK69-0902 1095 days
Cleaning Agents
Salcomix Metal Cleaner SV22-0500 1095 days
Salcomix Plastics Cleaner SV20-0530 1095 days
Salcomix Silicone Remover SV20-0505 1095 days
Hardener / Thinners / GJ50-
SC-Hardener (for PUR or ACR) SC- 730 days
SC65-0731, SC65-0703, SC65-0810 SC65- 545 days
SC65-0712, SC65-0714, SC65-0781,
SC65- 730 Tage
SC65-0782
SV-Thinners SV- 1095 days
GJ50-Dispersions GJ50- 1095 days
* Shelf life  store sealed products at temperatures between + 5° & + 25° C!
Ready mixed colours

 Shelf life of 12 months for 2K Products
 Shelf life of 9 months for 1K Products
(considering the converter itself is still within shelf life for the next 9 – 12 months)

Germany
General details
Product list
Overview GJ50-
GJ50-0001 WHITE GJ50-9002 LONDON BLACK

GJ50-0002 EXTENDER GJ50-9005 DARK 5
GJ50-0004 SALCOMAT 2 GJ50-9008 WENGE BLACK
GJ50-0030 SALCOM TXT FLOW
GJ50-0032 SALCOMIX TEXTURING PASTE
GJ50-0049 MICRO WHITE GJ50-9595 SALCOMETAL 4
GJ50-0067 SALCOMIX THICKENER GJ50-9010 SALCOMETAL 6
GJ50-1001 OCRA YELLOW GJ50-9014 SALCOMETAL 8
GJ50-1003 KLONDIKE YELLOW 21 GJ50-910H SALCOMETAL 9
GJ50-1004 CITROUS YELLOW 19 GJ50-920H SALCOMETAL 10
GJ50-1015 SPRINGLIKE YELLOW 11
GJ50-1016 DAWSON YELLOW
GJ50-1019 SHARP YELLOW GJ50-9301 RUSSET PEARL
GJ50-1020 YOT GJ50-9303 BLUE PEARL
GJ50-2010 MAE WEST ORANGE 31 GJ50-9305 GREEN PEARL
GJ50-2037 SUNSET ORANGE GJ50-9308 WHITE PEARL
GJ50-3003 IRON RED 48 GJ50-9309 RED PEARL
GJ50-3006 ROSA LITCHI GJ50-9310 GOLD PEARL
GJ50-3013 MARKET LIGHT RED GJ50-9311 COPPER PEARL
GJ50-3014 ROT 32 GJ50-9312 VIOLETT PEARL
GJ50-3015 ROSSO RUBINO GJ50-9313 YELLOW PEARL
GJ50-3017 SPORT RED 44 GJ50-9314 FINE SILVER PEARL
GJ50-3032 FAST MAROON GJ50-9315 FINE BLUE PEARL
GJ50-3047 SCARLETTO RED PLUS GJ50-9316 FINE GOLD PEARL
GJ50-4029 VIOLETTO II
GJ50-4043 MAGENTA 43
GJ50-5002 CYAN BLUE 74
GJ50-5007 SEA BLUE
GJ50-5008 VERSAILLES BLUE
GJ50-5014 PHTALO BLUE II
GJ50-6005 SCOTLAND GREEN 62
GJ50-6006 LEAF GREEN
GJ50-7001 PLATE-LIKE

Germany
Technical Information 5.1.1
103 BOF-UPE
Non-Ferro Body filler
Resin base: unsaturated polyester (UP)
Products needed: Body Filler GK03-2800

Hardener SB48-3800
Application and properties: Non-Ferro Body filler

● good adhesion to various metal substrates
● good filling properties
● fast drying
● excellent sandable
● VOC compliant
Substrates/Pre-treatment: Cleaning Sanding Final cleaning
Well-cured old paintwork SV20-0505 P80-150 SV20-0505
Bare steel SV22-0500 P80-150 SV22-0500
Galvanised steel SV22-0500 P180-240 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Glass-fibre reinforced plastics SV20-0530 P180-240 SV20-0530
Can be overcoated with: PRM-AKD, PRM-EPX, PRM-PUR, PRM-PVB
Product details: Remove corrosion (e.g., rust) by sanding or blasting.

On poorly cured old paintwork and e-coated OEM parts, sand
large area around damaged spots down to the bare metal.
Apply body filler to bare metal only.
Do not use this body filler on acid-treated surfaces or on
surfaces primed with acid-catalysed products (etch primers)
or 1K Primer Fillers.
Excess peroxide will cause discoloration in the finish.
Special Remark: 2004/42/IIB(cII)(250)190 The EU limit value for this product

(product category: b) in ready to use form is max. 250 g/l.
The VOC content of this product is 190 g/l.
It cannot be ruled out that this product contains particles
< 0.1 µm
The products are suitable for professional use only.
BASF Coatings GmbH Feb 2015

Germany
103 BOF-UPE
Non-Ferro Body filler
Resin base: unsaturated polyester (UP)
Application: Coarse and Fine Body Filler

Remarks: Values reg. VOC, coverage, solid content and viscosity are based on a mixing ratio by Vol.
mit SB48-3800. Select thinner acc. ambient temperature and size of object to be painted.
Paint system 103 BOF-UPE Non-Ferro Filler

VOC Theor. Coverage at 1 µm Solid Content
~190 g/l - m²/kg - m²/L ~98 % Gew.
Mixing ratio 103 BOF-UPE 100 % by weight
Hardener SB48-3800 2-3 % by weight
Thinner -
Viscosity at 23°C DIN 4 Film Thickness (DFT) Potlife 20°C Gloss at 60°
high viskos Should not exceed 1 cm in total
4-5 min -
(with sanding in between)
Ready for
Drying at Object Temp. Sanding Touch Dry
Assembling Recoatable
20°C 20-30 min - - -
60°C - - - -
Sanding P80/P150 P240 (body-filled areas and old paintwork)

Germany
117 PRM-CPO
1K Plastic Primer
Resin base: copolymer
Products needed: Converter GK17-1700

Converter/Pastes tintable with 1-2% GJ50- pastes
Application and properties: 1K Plastic Primer

● universal product for paintable plastics and old paintwork.
Plastics (pls. see 3.13) SV20-0530 abrasive pad SV20-0530
Can be overcoated with: PRM-AKD, PRM-PUR, PRM-EPX, TPC-AKD, TPC-PUR,

TPC-ACR, TPC-EPX
Product details: Standard product for paintable plastics. Pure polypropylene
(PP) and polyethylene (PE) cannot be painted. PU foam and
polyamide (PA) must be heated for 1 hour at 60°C and then
be cleaned again thoroughly.
Pls. see matrix 3.13 Painting of Plastics in technical manual.
Special Remark: It cannot be ruled out that this product contains particles
< 0.1 µm

Germany
117 PRM-CPO
1K Plastic Primer
Resin base: copolymer
Application: 1K Plastic Adhesion Primer

Select thinner acc. ambient temperature and size of object to be painted.
Paint system 117 PRM-CPO 1K Plastic Primer

~830 g/l 81 m²/kg 72 m²/L ~7 % Gew.
Mixing ratio 117 PRM-CPO 100 % by weight
Hardener -
Thinner -
~ 12 sec. 8-10 μm (1-1,5 coats) - -
Spraying
Viscosity Nozzle
Application Mixing ratio Pressure
(sec) (mm)
(bar)
Compliant Gun ~ 12 - < 2.5 1,3-1,7
HVLP ~ 12 - ~2 1,4-1,7
Suction Cup ~ 12 - 2-3 1,4-1,7
Airless / Airmix - - - -
Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll
Drying at Object Temp. dust-dry Flash Off Touch Dry Recoatable

20°C - 15 min - max. 2 h
60°C - - - -

Germany
261 PRM-PVB
1K Washprimer
Resin base: 1-component alkyd resin
Products needed: Converter GL60-1370

Thinner SV12-0360 Nitro
SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Washprimer

● chromate-free
● fast overcoatability thanks to short flash-off times
● specially developed for airless/airmix application
● welding primer for transport and first coating of
sandblasted substrates [after approx. 6 hours]
● colour shade ~RAL9002
Bare steel SV22-0500 P80-150 SV22-0500
Galvanised steel SV22-0500 abrasive pad SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: PRM-EPX, PRM-PUR, PRM-AKD, TPC-ACR, TPC-AKD,

TPC-PUR, TPC-EPX
Product details: Remove corrosion (e.g., rust) by fine sanding or blasting
before applying the product.
Adhesion depends on Aluminium alloy, pls. check before.
Do not use Polyester Bodyfiller on top of Washprimer
Special Remark: 2004/42/IIB(cIII)(780)695 The EU limit value for this product

(product category: c III) in ready to use form is max. 780 g/l.
< 0.1 µm
BASF Coatings GmbH Apr 2015

Germany
261 PRM-PVB
1K Washprimer
Application: 1C-Primer
Paint system 261 PRM-PVB 1K Washprimer

< 780 g/l 180 m²/kg 196 m²/L ~33 % Gew.
Mixing ratio 261 PRM-PVB 100 % by weight 4 Vol.
Hardener -
SV12-0360
Thinner SV13-0732 20 % by weight 1 Vol.
SV13-0701
4:1 Vol. 35-45 sec. 20-25 μm (1-2 coats) flash off 5-
- matt
8:1 Vol. >60 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 35-45 4:1 <2.5 1.3-1.4
HVLP 35-45 4:1 ~2 1.3-1.5
Suction Cup 35-45 4:1 2-3 1.3-1.4
Airless / Airmix >60 8:1 60-120 0.23-0.28

Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll without thinner
Flash Off
Drying at Object Temp. dust-dry
(wet-on-wet)
Touch Dry Recoatable
20°C 10-15 min 30 min 30 min < 5 days
60°C - - - -

Germany
260 PRM-PVB
Washprimer, grey
Resin base: 2-component vinyl resin

Converter/Pastes tintable with max. 3% GJ50- pastes
Hardener SC10-0710
Thinner SV13-0732 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: Washprimer, grey

● chromate-free
● short flash off times
● outstanding corrosion protection
● VOC compliant
● potlife 20°C up to 5 days, stir well every day
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: PRM-PUR, PRM-EPX, TPC-AKD, TPC-ACR, TPC-PUR,

TPC-EPX, BCT-MPS
Do not use Polyester Bodyfiller on top of Washprimer!

< 0.1 µm

Germany
260 PRM-PVB
Washprimer, grey
Application: 2C Primer
mit SC10-0710. Select thinner acc. ambient temperature and size of object to be painted.
Paint system 260 PRM-PVB Washprimer

< 780 g/l 183 m²/kg 175 m²/L ~ 22 % Gew.
Hardener SC10-0710 40 % by weight 1 Vol.

SV13-0732
SV15-0339
2:1:1 Vol. 16-20 sec.
20-30 μm (2-3 coats) flash off 5-
2:1:0.5 Vol. 24-26 sec. <5 Days matt
10 min. between
2:1:0.25 Vol. 30-32 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-20 2:1:1 < 2.5 1.4-1.8
HVLP 16-20 2:1:1 ~2 1.4-1.8
Suction Cup 16-20 2:1:1 2-3 1.4-1.8
Double Diaphragm or
16-20 2:1:1 <4 1.0-1.1
Pressure Pump
Flash Off
(wet-on-wet)
20°C 5-10 min 20-30 min 10-15 min max. 72 h
60°C - 10-15 min - -

Germany
260 PRM-PVB
Washprimer, white

Hardener SC10-0710
SV13-0701 Normal
SV15-0339 Slow
Application and properties: Washprimer, white

● chromate-free
● potlife 20°C up to 5 days, stir well every day
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: PRM-AKD, PRM-PUR, PRM-EPX, TPC-AKD, TPC-ACR,

TPC-PUR, TPC-EPX, BCT-MPS

< 0.1 µm

Germany
260 PRM-PVB
Washprimer, white
Paint system 260 PRM-PVB Washprimer

< 780g g/l 197 m²/kg 187 m²/L ~ 23 % Gew.

SV13-0732
SV15-0339
2:1:1 Vol. 16-20 sec.
2:1:0.5 Vol. 20-22 sec. <5 Days matt
10 min. between
2:1:0.25 Vol. 24-26 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-20 2:1:1 < 2,5 1.4-1.8
HVLP 16-20 2:1:1 ~2 1.4-1.8
Suction Cup 16-20 2:1:1 2-3 1.4-1.8
Double Diaphragm or
16-20 2:1:1 <4 1.0-1.1
Pressure Pump
Flash Off
(wet-on-wet)
20°C 5-10 min 20-30 min 10-15 min max. 72 h
60°C - 10-15 min - -

Germany
304 PRM-EE
Resin base: 1-component Alkyd / Epoxyester resin
Products needed: Pastes GJ50-

Converter GK15-1301
Converter/Pastes 90 : 10
SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Epoxy Ester Primer Filler

● good leveling
● good sagging resistance
● many different colors possible
● good corrosion protection as appropriate for 1K epoxy
ester primer filler.
● min. ambient temp. +15°C for application
Bare steel SV22-0500 P80-150 SV22-0500
Can be overcoated with: TPC-AKD, TPC-ACR, TPC-PUR, TPC-EPX

Product details: Not suitable for use under polyester body filler.
Remove corrosion (e.g., rust) by fine sanding or blasting
< 0.1 µm

Germany
304 PRM-EE
Application: 1C Primer Filler

Paint system 304 PRM-EE 1K Primer Filler

VOC Theor. Coverage at 1 µm (RAL3000/9010) Solid Content
590-600 g/l 316/304 m²/kg 345/341 m²/L 44-47 % Gew.
Mixing ratio 304 PRM-EE 100 % by weight 2 Vol.
Hardener -
SV12-0360
SV13-0701
2:1 Vol. 18-20 sec.
3:1 Vol. 28-32 sec. - matt
10 min. between
4:1 Vol. 36-40 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-20 2:1 < 2.5 1.6-1.8
HVLP 18-20 2:1 ~2 1.6-1.8
Suction Cup 18-20 2:1 2-3 1.6-1.8
Airless / Airmix 28-32 3:1 120-150 0.28-0.33

Double Diaphragm or
18-20 2:1 <4 1.0
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 10 min 1h 1h max. 72 h
60°C - 30 min 30 min -

Germany
306 PRM-EE

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Universal Primer Filler

● suitable for use as high-build primer (up to 120 µm)
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Copper SV22-0500 abrasive pad SV22-0500
Brass SV22-0500 abrasive pad SV22-0500
Can be overcoated with: TPC-ACR, TPC-AKD, TPC-PUR, TPC-EPX

Adhesion depends on Aluminium alloy, pls. Check before.
< 0.1 µm

Germany
306 PRM-EE

Paint system 306 PRM-EE 1K Primer Filler

~580 g/l 320 m²/kg 464 m²/L ~67 % Gew.
Mixing ratio 306 PRM-EE 100 % by weight 5 Vol.
Hardener -
SV12-0360
SV13-0701
5:2 Vol. 25-35 sec. ~80 μm (2 coats) flash off 5-10
- matt
6:1 Vol. >60 sec. min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 25-35 5:2 <2.5 1.6-1.8
HVLP 25-35 5:2 2-3 1.6-1.9
Suction Cup 25-35 5:2 3-4 1.6-1.9
Airless / Airmix >60 6:1 80-180 0.23-0.33

Double Diaphragm or
- - - -
Pressure Pump
Flash Off
Drying at Object Temp. dust-dry Touch Dry
(wet-on-wet)
Recoatable
20°C 20 min 1h 2h max. 72 h
60°C - - - -

Germany
302 PRM-AKD

Converter GK11-1302
SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Primer Filler

● good leveling
● good corrosion protection
Bare steel SV22-0500 P80-150 SV22-0500
Product details: Not suitable for use under polyester body filler.
< 0.1 µm

Germany
302 PRM-AKD

Paint system 302 PRM-AKD 1K Primer Filler

563-576 g/l 326/314 m²/kg 375/373 m²/L 49-53 % Gew.
Mixing ratio 302 PRM-AKD 100 % by weight 2 Vol.
Hardener -
SV12-0360
SV13-0701
2:1 Vol. 13-15 sec.
3:1 Vol. 15-17 sec. - matt
10 min. between
4:1 Vol. 25-35 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 13-15 2:1 < 2.5 1.6-1.8
HVLP 13-15 2:1 ~2 1.6-1.9
Suction Cup 13-15 2:1 2-3 1.6-1.9
Airless / Airmix 25-35 4:1 120-150 0.28-0.33

Double Diaphragm or
15-17 3:1 <4 1.0
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 10 min 1h 1h max. 72 h
60°C - 30 min 30 min -

Germany
308 PRM-AKD

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Primer Filler

Bare steel SV22-0500 P80-150 SV22-0500
Can be overcoated with: TPC-ACR, TPC-PUR, TPC-EPX, TPC-AKD


(product category: c II) in ready to use form is max. 540 g/l.
< 0.1 µm

Germany
308 PRM-AKD


<540 g/l 320 m²/kg 445 m²/L ~67 % Gew.
Hardener -
SV12-0360
SV13-0701
3:1 Vol. 20-30 sec. 40-60 μm (2 coats) flash off 5-
- matt
6:1 Vol. 40-50 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-30 3:1 <2.5 1.6-1.8
HVLP 20-30 3:1 2-3 1.6-1.9
Suction Cup 20-30 3:1 3-4 1.6-1.9
Airless / Airmix 40-50 6:1 80-180 0.28-0.33

Double Diaphragm or
- - - -
Pressure Pump
Flash Off
(wet-on-wet)
Recoatable
20°C 15-20 min 3h 6h max. 72 h
60°C -

Germany
305 PRM-AKD
1K Alkyd Universal Primer Filler, grey

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Universal Primer Filler, grey

● good leveling
● VOC compliant
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: TPC-AKD, TPC-ACR, TPC-EPX, TPC-PUR

Adhesion on Alu depends on alloy and should be checked
before.
305 is not suitable for use under polyester body filler.
Special Remark: 2004/42/IIB(cl)(540)533 The EU limit value for this product

(product category: c I) in ready to use form is max. 540 g/l.
< 0.1 µm

Germany
305 PRM-AKD
1K Alkyd Universal Primer Filler, grey


< 540 g/l 283 m²/kg 383 m²/L ~ 62 % Gew.
Hardener -
SV12-0360
SV13-0701
4:1 Vol. 18-22 sec.
40-50 μm (1,5-2 coats) flash off
5:1 Vol. 22-24 sec. - matt
5-10 min. between
6:1 Vol. 24-26 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-22 4:1 < 2.5 1.6-1.8
HVLP 18-22 4:1 ~2 1.6-1.9
Suction Cup 18-22 4:1 2-3 1.6-1.9
Airless / Airmix 22-26 5:1 120-150 0.28-0.33

Double Diaphragm or
18-22 4:1 <4 1.1
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 20-25 min 30 min 2-3 h max. 72 h
60°C - 20 min 20 min -

Germany
305 PRM-AKD
1K Alkyd Universal Primer Filler, white

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Universal Primer Filler, white

● good leveling
● colour shade white
● VOC compliant
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: TPC-AKD, TPC-ACR, TPC-EPX, TPC-PUR

Adhesion on Alu depends on alloy and should be checked
before.
Special Remark: 2004/42/IIB(cl)(540)533 The EU limit value for this product

< 0.1 µm

Germany
305 PRM-AKD
1K Alkyd Universal Primer Filler, white


< 540 g/l 283 m²/kg 383 m²/L ~ 62 % Gew.
Hardener -
SV12-0360
SV13-0701
4:1 Vol. 18-22 sec.
40-50 μm (1,5-2 coats) flash off
5:1 Vol. 22-24 sec. - matt
5-10 min. between
6:1 Vol. 24-26 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-22 4:1 < 2.5 1.6-1.8
HVLP 18-22 4:1 ~2 1.6-1.9
Suction Cup 18-22 4:1 2-3 1.6-1.9
Airless / Airmix 22-26 5:1 120-150 0.28-0.33

Double Diaphragm or
18-22 4:1 <4 1.1
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 20-25 min 30 min 2-3 h max. 72 h
60°C - 20 min 20 min -

Germany
307 PRM-AKD
1K HS Steel Primer
Products needed: Converter GB16-1307

Thinner GK69-2907
Application and properties: 1K HS Steel Primer

● can be applied up to 200µm
● suitable for up to 12 month outdoor-storage*
● VOC compliant
Bare steel SV22-0500 P80-150 SV22-0500
Sandblasted steel Blasted steel to grade SA 2 ½ (acc. DIN ISO 12944, Part 4)
Surface must be dry and free from: oil, dirt, dust, mill scale,
other contaminants and old paintwork.
Product details: *In case of outdoor storage: before over coating with topcoat
clean surface with a steam jet cleaner, apply one thin coat
307 as adhesion promoter.
During the day increase of viscosity to 30 s DIN 4. May be
reduced (for once) to ~ 24 s again next day with GK69-2907.
Special Remark: 2004/42/IIB(cI)(540)530 The EU limit value for this product

< 0.1 µm

Germany
307 PRM-AKD
1K HS Steel Primer


< 540 g/l 312 m²/kg 431 m²/L ~63 % Gew.
Hardener -
Thinner GK69-2907 15 % by weight 1 Vol.
4:1 Vol. 20-24 sec.
50-60 μm (2 coats) flash off 5-
5:1 Vol. 29-33 sec. - matt
10 min. between
6:1 Vol. 32-36 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-24 4:1 < 2,5 1.6-1.8
HVLP 20-24 4:1 ~2 1.6-1.9
Suction Cup 20-24 4:1 2-3 1.6-1.9
Airless / Airmix 29-36 5:1 120-150 0.28-0.33

Double Diaphragm or
20-24 4:1 <4 1.1
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 1h 1.5 h 2-3 h max. 72 h
60°C - 30-45 min 30 min -

Germany
524 PRM-EPX
2K Epoxy Primer Filler
Resin base: 2-component epoxy resin

Converter GK15-2300
Hardener SC65-0731 Normal
SC65-0703 Slow
Thinner SV32-0482 Normal
Application and properties: 2K Epoxy Primer Filler

● good build and flow
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: TPC-AKD, TPC-PUR, TPC-EPX, TPC-ACR, BCT-MPS

Product details: Remove corrosion (e.g., rust) by sanding or blasting before
applying the product.
Can be overcoated with Salcomix Non Ferro Body Filler
GK03-2800 after 45 – 60 min. at 60°C.
Remark: SC65-0703 in combination with dispersion GJ50-
3013 or GJ50-1019 leads to colour change.
< 0.1 µm

Germany
524 PRM-EPX
2K Epoxy Primer Filler
Paint system 524 PRM-EPX 2K Primer Filler

540-560 g/l 354/328 m²/kg 404/397 m²/L 50-55 % Gew.
Mixing ratio 524 PRM-EPX 100 % by weight 3 Vol. 3 Vol.
20 % by
SC65-0731 - 1 Vol. -
weight
Hardener
20 % by
SC65-0703 - - 1 Vol.
weight
35 % by 20 % by
Thinner SV32-0482 2 Vol. 1 Vol.
weight weight
3:1:1 Vol. 22-26 sec. 50-60 μm (2 coats) flash off 5-
3h matt
3:1:0.5 Vol. 28-34 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 22-26 3:1:1 < 2.5 1.6-1.8
HVLP 22-26 3:1:1 ~2 1.6-1.9
Suction Cup 22-26 3:1:1 2-3 1.6-1.9
Airless / Airmix 28-34 3:1:0.5 120-150 0.28-0.33

Double Diaphragm or
22-34 3:1:1 <4 1.1
Pressure Pump
Flash Off
(wet-on-wet)
20°C (-0731/-0703) 20 min 1/1,5 h 3/6 h max. 72 h
60°C (-0731/-0703) - 30 min 30 min -
Wet and dry sanding after sufficient drying for 45 – 60 min. at 60°C
Sanding
panel temperature (with SC65-0731)

Germany
524 PRM-EPX
2K Epoxy Primer Filler, GL62-7610, grey

SC65-0703 Slow
Application and properties: 2K Epoxy Primer Filler, GL62-7610, grey

Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500

GK03-2800 after 45 – 60 min. at 60°C.

< 0.1 µm

Germany
524 PRM-EPX
2K Epoxy Primer Filler, GL62-7610, grey
Paint system 524 PRM-EPX 2K Primer Filler, GL62-7610, grey

< 540 g/l 312 m²/kg 402 m²/L ~ 58 % Gew.
10 % by
SC65-0731 - 1 Vol. -
weight
Hardener
20 % by
SC65-0703 - - 1 Vol.
weight
30 % by 20 % by
Thinner 3 Vol. 1 Vol.
SV32-0482 weight weight
3-4 h matt
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-30 3:1:1 < 2.5 1.6-1.8
HVLP 20-30 3:1:1 ~2 1.6-1.9
Suction Cup 20-30 3:1:1 2-3 1.6-1.9
Airless / Airmix 46-48 3:1:0.5 120-150 0.28-0.33

Double Diaphragm or
20-30 3:1:1 <4 1.1
Pressure Pump
Flash Off
(wet-on-wet)
20°C (-0731/-0703) 20 min 1/1,5 h 3/6 h max. 72 h
60°C (-0731/-0703) - 30 min 30 min -
Sanding

Germany
524 PRM-EPX
2K Epoxy Primer Filler, GL62-7621, white

SC65-0703 Slow
Application and properties: 2K Epoxy Primer Filler, GL62-7621, white

● colour shade white
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500

GK03-2800 after 45 – 60 min. at 60°C.

< 0.1 µm

Germany
524 PRM-EPX
2K Epoxy Primer Filler, GL62-7621, white
Paint system 524 PRM-EPX 2K Primer Filler, GL62-7621, white

< 540 g/l 325 m²/kg 394 m²/L ~ 55 % Gew.
10 % by
SC65-0731 - 1 Vol. -
weight
Hardener
20 % by
SC65-0703 - - 1 Vol.
weight
30 % by 20 % by
Thinner 3 Vol. 1 Vol.
SV32-0482 weight weight
3-4 h matt
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-30 3:1:1 < 2.5 1.6-1.8
HVLP 20-30 3:1:1 ~2 1.6-1.9
Suction Cup 20-30 3:1:1 2-3 1.6-1.9
Airless / Airmix 46-48 3:1:0.5 120-150 0.28-0.33

Double Diaphragm or
22-26 3:1:1 <4 1.1
Pressure Pump
Flash Off
(wet-on-wet)
20°C (-0731/-0703) 20 min 1/1,5 h 3/6 h max. 72 h
60°C (-0731/-0703) - 30 min 30 min -
Sanding

Germany
528 PRM-EPX

Hardener SC65-0712
Thinner SV32-0482
Application and properties: 2K Epoxy High Build Primer Filler

● active corrosion protection
Bare steel SV22-0500 P150-180 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Can be overcoated with: TPC-ACR, TPC-PUR, TPC-EPX, TPC-AKD, BCT-MPS


< 0.1 µm

Germany
528 PRM-EPX

Paint system 528 PRM-EPX 2K High Build Primer Filler

<540 g/l 300 m²/kg 459 m²/L ~66 % Gew.
Mixing ratio 528 PRM-EPX 100 % by weight 4 Vol.
Thinner 25 % by weight 1 Vol.

SV32-0482
6h matt
4:1+5% Vol. >60 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 55-65 4:1:1 <2.5 1.6-1.8
HVLP 55-65 4:1:1 2-3 1.6-1.9
Suction Cup 55-65 4:1:1 3-4 1.6-1.9
Airless / Airmix >60 4:1+5% 80-180 0.28-0.38

Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll with less thinner
Flash Off
(wet-on-wet)
Recoatable
20°C 60 min 4h 4h max. 72 h
60°C - - - -

Germany
529 PRM-EPX

Hardener SC65-0731
Thinner SV32-0482
Application and properties: 2K Epoxy Primer Filler Fast

Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500

< 0.1 µm

Germany
529 PRM-EPX

Paint system 529 PRM-EPX 2K Primer Filler Fast

~610 g/l 275 m²/kg 324 m²/L 50 % Gew.
Thinner SV32-0482 15 % by weight 15 % Gew.
4:1+15% Vol. 30-40 sec. 50-80 μm (2-3 coats) flash off 5-
8h matt
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 30-40 4:1+15% <2.5 1.6-1.8
HVLP 30-40 4:1+15% 2-3 1.6-1.9
Suction Cup 30-40 4:1+15% 3-4 1.6-1.9
Airless / Airmix >60 4:1+5% 80-150 0.28-0.38

Double Diaphragm or
- - - -
Pressure Pump
Flash Off
(wet-on-wet)
Recoatable
20°C 30 min 1h 1h max. 72 h
60°C - - - -

Germany
511 PRM-EPX
2K Epoxy Zinc Rich Primer

Hardener SC65-0703
Application and properties: 2K Epoxy Zinc Rich Primer

● good adhesion on shot blasted steel
● good cathodic protection
● Zinc content dry film ~ 67% weight
● temperature resistance up to 300°C
Substrates/Pre-treatment:
Can be overcoated with: PRM-EPX, PRM-PUR, TPC-ACR, TPC-PUR, TPC-EPX

Product details: DIN EN ISO 12944 C5 M (medium, 5-15 years) will be
fulfilled in a 3 layer system (i.e. GL62-7610 or 2K EP 524 as
intermediate coating), pls. Refer to Matrix 3.15.
After adding hardener pls. Wait 10-15 min. before application;
do not process at temp. Below +12°C; larger quantities
should be prepared in a container equipped with an agitator.
Application area: steel processing industry with high demand
regarding corrosion protection (i.e. shore area, buildings with
high humidity and condensation, high pollution etc.), vehicle
manufacturing (chassis, transport)
< 0.1 µm

Germany
511 PRM-EPX
2K Epoxy Zinc Rich Primer
Paint system 511 PRM-EPX 2K Epoxy Zinc Rich Primer

> 540 g/l 276 m²/kg 559 m²/L ~ 80 % Gew.
10:1:4 Vol. 16-18 sec. 50-70 μm (2 coats) flash off ~15
12 h matt
10:1:3 Vol. 22-26 sec. min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-18 10:1:4 < 2.5 1.6-1.8
HVLP 16-18 10:1:4 ~2 1.6-1.9
Suction Cup 16-18 10:1:4 2-3 1.6-1.9
Airless / Airmix 22-26 10:1:3 150-180 0.38-0.43

Double Diaphragm or
16-18 10:1:4 <4 1.1-1.2
Pressure Pump
Flash Off
(wet-on-wet)
20°C 30 min 4h 24 h max. 72 h
60°C - 45-60 45-60 -

Germany
512 PRM-EPX
2K Zinc Rich Primer, green

Hardener SC65-0781
Thinner SV32-0482
Application and properties: 2K Zinc Rich Primer, green

● 2K zinc-rich primer for sandblasted and hot-dip galvanised
steel substrates
Can be overcoated with: PRM-PUR, PRM-EPX

Product details: In the three-layer system, DIN EN ISO 12944 C5 M M is
complied with (use PRM-PUR or PRM-EPX as intermediate
coat).
After addition of hardener wait approx. 10 – 15 min before
use do not apply at temperatures below +12°C.
Mix larger amounts in storage containers with agitator.
Field of application: steel processing industry with high
corrosion protection requirements (e.g. sea climate, buildings
with high air humidity and condensation, high air pollution);
construction steel (sandblasted), vehicle construction
(chassis, transport in coastal area, etc.)

< 0.1 µm

Germany
512 PRM-EPX
2K Zinc Rich Primer, green
Paint system 512 PRM-EPX 2K Zinc Rich Primer

<540 g/l 225 m²/kg 605 m²/L 87 % Gew.
7:1:2 Vol. 20-30 sec.
50-80 μm (1 coat) 3h matt
7:1+5% Vol. 25-35 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-30 7:1:2 <2.5 1.8-2.5
HVLP 20-30 7:1:2 2-3 1.8-2.5
Suction Cup - - - -
Airless / Airmix 25-35 7:1+5% 100-200 0.33-0.43

Double Diaphragm or
- - - -
Pressure Pump
Flash Off
(wet-on-wet)
Recoatable
20°C 1h 4h 8h max. 72 h
60°C - - - -

Germany
514 PRM-EPX
2K Iron Mica Primer

Hardener SC65-0714
Thinner SV32-0482
Application and properties: 2K Iron Mica Primer

● High-build 2K topcoat and intermediate coat, contains iron
mica pigments according to TL 918 300, sheet 87
● colour shade ~DB 701
2K- Undercoats Salcomix 2K Zinc Rich Primer
Can be overcoated with: TPC-ACR, TPC-PUR

Product details: In the three-layer system, DIN EN ISO 12944 C5 M H is
complied with (use 515 PRM-EPX 2K Zinc Dust Primer as
priming coat).
with high air humidity and condensation, high air pollution,
etc.)

< 0.1 µm

Germany
514 PRM-EPX
2K Iron Mica Primer
Application: 2C topcoat and intermediate coat

Paint system 514 PRM-EPX 2K Iron Mica Primer

<540 g/l 320 m²/kg 507 m²/L 54 % Gew.
high viskos
~80 μm (1-2 coats) 8h matt
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun >120 4:1:1 <2.5 2.0-2.5
HVLP >120 4:1:1 2-3 2.0-2.5
Suction Cup - - - -
Airless / Airmix >120 4:1+5% 100-180 0.33-0.38

Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll
Flash Off
(wet-on-wet)
20°C 1h 8h 12 h max. 72 h
60°C - - - -

Germany
515 PRM-EPX
2K Zinc Rich Primer, grey

Hardener SC65-0782
Thinner SV32-0482
Application and properties: 2K Zinc Rich Primer, grey

● 2K zinc-rich paint for sandblasted steel substrates
Can be overcoated with: PRM-EPX, PRM-PUR

Product details: In the three-layer system, DIN EN ISO 12944 C5 M H is
complied with (use 514 PRM-EPX 2K EG Epoxy Primer as
intermediate coat).
After addition of hardener wait approx. 10 – 15 min before
use, do not apply at temperatures below +12°C.
Mix larger amounts in storage containers with agitator.
with high air humidity and condensation, high air pollution,
etc.)

< 0.1 µm

Germany
515 PRM-EPX
2K Zinc Rich Primer, grey
Paint system 515 PRM-EPX 2K Zinc Rich Primer

<540 g/l 160 m²/kg 533 m²/L 87 % Gew.
high viskos
~80 μm (1-2 coats) 4h matt
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun >120 5:1:2 <2.5 2.0-2.5
HVLP >120 5:1:2 2-3 2.0-2.5
Suction Cup - - - -
Airless / Airmix >120 5:1+10% 100-180 0.33-0.38

Double Diaphragm or
- - - -
Pressure Pump
Flash Off
(wet-on-wet)
Recoatable
20°C 30 min 8h 8h max. 72 h
60°C - - - -

Germany
682 PRM-PUR
2K PUR Surfacer
Resin base: 2-component PU resin

Converter GK14-2301
Converter/Pastes 80:20
SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K PUR Surfacer

● very good build and flow
● sanding filler and wet-on-wet surfacer
● good adhesion to various plastics
Bare steel SV22-0500 P80-150 SV22-0500
Product details: The surface must be clean, dry and free from rust and other
contaminations.
< 0.1 µm

Germany
682 PRM-PUR
2K PUR Surfacer
Application: 2C Filler wet-on wet

Paint system 682 PRM-PUR 2K PUR Surfacer

580-645 g/l 278/254 m²/kg 310/299 m²/L 41-47 % Gew.
Mixing ratio 682 PRM-PUR 100 % by weight 5 Vol. 4 Vol.
15 % by
SC29-0863 - 1 Vol. -
weight
Hardener
20 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
25 % by 30 % by
weight weight
SV15-0339
3h matt
5:1:1 Vol. >50 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 22-26 5:1:2 < 2.5 1.6-1.8
HVLP 22-26 5:1:2 ~2 1.6-1.9
Suction Cup 22-26 5:1:2 2-3 1.6-1.9
Airless / Airmix 22-26 5:1:2 120-150 0.28-0.33

Double Diaphragm or
22-26 5:1:2 <4 1.1
Pressure Pump
Brush & Roll 10:1 + 5% SC29-0823 & GK69-0903
Flash Off
(wet-on-wet)
20°C 20 min 1h 3h max. 72 h
60°C - 30 min 30 min -
Typical wet-on-wet Primer Filler. Wet and dry sanding after
Sanding
sufficient drying for 45 – 60 min. at 60°C panel temperature.

Germany
682 PRM-PUR
2K PUR Surfacer, grey

SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K PUR Surfacer, grey

● sanding filler and wet-on-wet surfacer
Bare steel SV22-0500 P80-150 SV22-0500
Product details: The surface must be clean, dry and free from rust and other
contaminations.
< 0.1 µm

Germany
682 PRM-PUR
2K PUR Surfacer, grey
Application: 2C Filler wet-on wet

Paint system 682 PRM-PUR 2K PUR Surfacer

~628 g/l 262 m²/kg 303 m²/L ~46 % Gew.
15 % by
SC29-0863 - 1 Vol. -
weight
Hardener
20 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
25 % by 30 % by
weight weight
SV15-0339
3h matt
5:1:1 Vol. >50 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 22-26 5:1:2 < 2.5 1.6-1.8
HVLP 22-26 5:1:2 ~2 1.6-1.9
Suction Cup 22-26 5:1:2 2-3 1.6-1.9
Airless / Airmix 22-26 5:1:2 120-150 0.28-0.33

Double Diaphragm or
22-26 5:1:2 <4 1.1
Pressure Pump
Brush & Roll 10:1 + 5% SC29-0823 & GK69-0903
Flash Off
(wet-on-wet)
20°C 20 min 1h 3h max. 72 h
60°C - 30 min 30 min -
Typical wet-on-wet Primer Filler. Wet and dry sanding after
Sanding
sufficient drying for 45 – 60 min. at 60°C panel temperature.

Germany
684 PRM-PUR
2K HS Primer Filler

SC29-0823 Normal
SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K HS Primer Filler

● flame-retardant according to IMO Res. MSC.307(88) (FTP
code 2010), Annex 1, part 5. The surface material with low
flame-spread characteristics does not apply to pipes, pipe
coverings or cables
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Product details: For airless application, we recommend using hardener

SC29-0823. Remove corrosion (e.g., rust) by fine sanding or
blasting before applying the product. Adhesion depends on
Aluminium alloy, pls. check before.

< 0.1 µm

Germany
684 PRM-PUR
2K HS Primer Filler

Paint system 684 PRM-PUR 2K HS Primer Filler

<540 g/l 342 m²/kg 506 m²/L 70 % Gew.
SC29-0863 10 % by
- 1 Vol. -
Hardener SC27-0500 weight
SC29-0823 - 7 % by weight - 1 Vol.
SV13-0732
20 % by 15 % by
Thinner SV13-0701 20 % Gew. 15 % Gew.
weight weight
SV15-0339
7:1+20% Vol. 20-25 sec. ~80 μm (2 coats) flash off 5-10
2-3 h matt
10:1+15% Vol. 30-40 sec. min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-25 7:1+20% <2.5 1.6-1.8
HVLP 20-25 7:1+20% 2-3 1.6-1.9
Suction Cup 20-25 7:1+20% 3-4 1.6-1.9

10:1+15%
Airless / Airmix 30-40 80-180 0.28-0.38
(SC29-0823)
Double Diaphragm or
- - - -
Pressure Pump
Flash Off
(wet-on-wet)
20°C 1h 1h 4h max. 72 h
60°C - - - -

Germany
685 PRM-PUR
2K MS Surfacer, beige

SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K MS Surfacer, beige

● excellent sandable
● VOC-Compliant with hardener SC29-0863
● tintable
2K- Undercoats Salcomix 2K Wash Primer, Salcomix 2K Epoxy Primer Filler

Product details: With hardener SC27-0500 >540 g/l, not VOC-Compliant!

< 0.1 µm

Germany
685 PRM-PUR
2K MS Surfacer, beige
Application: 2C Surfacer
Paint system 685 PRM-PUR MS Surfacer

<540 g/l 285 m²/kg 404 m²/L ~ 62 % Gew.
15 % by
SC29-0863 - 1 Vol. -
weight
Hardener
20 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
10 % by 20 % by
weight weight
SV15-0339
4:1:1 Vol. 23-27 sec.
4:1:0.5 Vol. 33-37 sec. 2h matt
10 min. between
4:1:0.25 Vol. 43-47 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 23-27 4:1:1 < 2.5 1.6-1.8
HVLP 23-27 4:1:1 ~2 1.6-1.9
Suction Cup 23-27 4:1:1 2-3 1.6-1.9
Airless / Airmix 23-27 4:1:1 120-150 0.28-0.33

Double Diaphragm or
23-27 4:1:1 <4 1.1
Pressure Pump
Brush & Roll 8:1 with SC29-0823
Drying at Object Temp. Touch Dry Wet Sanding Sanding Recoatable

20°C 1h 2h 3h within 24 h
60°C - 30 min 30 min -
Sanding P800 for wet sanding, P400 for dry sanding

Germany
309 TPC-AKD
1K Alkyd Topcoat

Converter GK41-1102
SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Topcoat

● good weathering, yellowing resistance and hardness
● brilliant top coat appearance
● optimum product properties after 12 days of drying
● can be applied directly to steel
Bare steel SV22-0500 P80-150 SV22-0500
Undercoats 309 TPC-AKD can be used for all Salcomix primers.
Product details: Due to different qualities and compounds of steel direct

adhesion should always be checked case by case.
Glossy 1K Alkyd Topcoat for painting of out- and indoor
goods with direct adhesion on steel.
If adjusted with Nitro Thinner SV12-0360 a lower gloss level
may occur. Addition of 5-10% Hardener (SC27-0500 / SC29-
0863) optimize weathering and drying (Potlife ~4h)
< 0.1 µm

Germany
309 TPC-AKD
1K Alkyd Topcoat
Application: 1C solid Topcoat

Paint system 309 TPC-AKD 1K Topcoat

565-605 g/l 375/336 m²/kg 374/367 m²/L 38-48 % Gew.
Check Color prior application Weigh in according to mixing formula (colour):
Mixing ratio 309 TPC-AKD 100 % by weight 3 Vol.
Hardener -
SV12-0360
SV13-0701
3:1 Vol. 18-22 sec. 40-60 μm (2-3 coats) flash off 5-
- > 80
4:1 Vol. 22-26 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-22 3:1 < 2,5 1.3-1.6
HVLP 18-22 3:1 ~2 1.3-1.7
Suction Cup 18-22 3:1 2-3 1.3-1.7
Airless / Airmix 22-26 4:1 120-150 0.23-0.28

Double Diaphragm or
18-22 3:1 <4 1.0
Pressure Pump
Brush & Roll
Drying at Object Ready for
dust-dry Touch Dry
Assembling
trough dry Recoatable
Temp.
20°C ~30 min 18 h 36-48 h 12-15 Days > 7 days
60°C - 30-45 min 60-90 min - -

Germany
320 TPC-AKD
1K Alkyd Topcoat

Converter GK41-1108/ GK41-1404 F.W.
Converter/Pastes 80:20 / 98:2
SV13-0732 Fast
SV13-0701 Normal

Product details: It is particularly suitable when quick air drying, glossy top
coats are required, characterised by good outdoor resistance,
as for agricultural machinery, industrial vehicles and earth
moving machines.
may occur.
Addition of 5-10% Hardener (SC27-0500 / SC29-0863)
optimize weathering and drying (Potlife~4h)
< 0.1 µm

Germany
320 TPC-AKD
1K Alkyd Topcoat


590-620 g/l 351/340 m²/kg 335/328 m²/L 34-43 % Gew.
Hardener -
SV12-0360
Thinner SV13-0732 30-45 % by weight 1 Vol.
SV13-0701
2:1 Vol. 20-24 sec.
3:1 Vol. 35-45 sec. - > 85
10 min. between
4:1 Vol. 45-65 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-24 2:1 < 2.5 1.3-1.4
HVLP 20-24 2:1 ~2 1.3-1.5
Suction Cup 20-24 2:1 2-3 1.3-1.7
Airless / Airmix 35-45 3:1 120-150 0.23-0.28

Double Diaphragm or
20-24 2:1 <4 1.0
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C ~25 min ~5 h 24-36 h 10-12 Days > 7 days
60°C - 30 min 60 min - -

Germany
321 TPC-AKD
Products needed: Converter GK41-1201/ GK41-1501 F.W.

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Topcoat, semi-glossy

● may be used for matting of Alkyd topcoats (except the 309
TPC-AKD)
Product details: It is particularly suitable when quick air drying, semi glossy
top coats are required, characterised by good outdoor
resistance, as for agricultural machinery, industrial vehicles
and earth moving machines.
may occur.
optimize weathering and drying (Potlife 4h)
< 0.1 µm

Germany
321 TPC-AKD


560-590 g/l 346/306 m²/kg 376/342 m²/L 45-51 % Gew.
Hardener -
SV12-0360
SV13-0701
2:1 Vol. 16-20 sec.
3:1 Vol. 21-25 sec. - ~75 ± 10
10 min. between
4:1 Vol. 25-30 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-20 2:1 < 2.5 1.3-1.4
HVLP 16-20 2:1 ~2 1.3-1.5
Suction Cup 16-20 2:1 2-3 1.4-1.7
Airless / Airmix 21-25 3:1 120-150 0.23-0.28

Double Diaphragm or
16-25 2:1 <4 1.0-1.1
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C ~20 min 3-4 h 24 h 10-12 Days > 7 days
60°C - 30 min 60 min - -

Germany
326 TPC-AKD
1K Alkyd Topcoat
Products needed: Converter GK41-1109/ GK41-1110 F.W.

SV13-0732 Fast
SV13-0701 Normal

Product details: Neutral: 75% GK41-1109 + 5% GK69-1900 + 20% GJ50-

FW: 93% GK41-1110 + 5% GK69-1900 + 2% GJ50-
It is particularly suitable when quick air drying, glossy top
coats are required, characterised by good outdoor resistance,
as for agricultural machinery, industrial vehicles and earth
moving machines.
Compared to 1K AKD 320 shelf life is longer.
If adjusted with SV12-0360 a lower gloss level may occur.
optimize weathering and drying (Potlife ~4h)
< 0.1 µm

Germany
326 TPC-AKD
1K Alkyd Topcoat


575-625 g/l 337/339 m²/kg 317/355 m²/L 33-44 % Gew.
Hardener -
SV12-0360
SV13-0701
2:1 Vol. 15-20 sec.
3:1 Vol. 20-35 sec. - > 85
10 min. between
4:1 Vol. 35-55 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 15-20 2:1 < 2.5 1.3-1.4
HVLP 15-20 2:1 ~2 1.3-1.5
Suction Cup 15-20 2:1 2-3 1.3-1.7
Airless / Airmix 20-35 3:1 120-150 0.23-0.28

Double Diaphragm or
15-35 2:1 <4 1.0
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C 20-30 min 4-5 h 24-36 h 10-12 Days > 7 days
60°C - 30 min 60 min - -

Germany
328 TPC-AKD
1K Alkyd Topcoat, semi-glossy, DTM

SV13-0732 Fast
SV13-0701 Normal
Application and properties: 1K Alkyd Topcoat, semi-glossy, DTM

● fast drying
Bare steel SV22-0500 P80-150 SV22-0500
2K- Undercoats ican be used for all Salcomix 2K primer
Product details: Semi-glossy 1K Alkyd topcoat for coating interior and exterior
parts with direct adhesion to steel. Can be used for steel
boxes, mechanical engineering ad equipment construction
industries, agricultural equipment and steel structures.
optimize weathering and drying (Potlife ~4h).
< 0.1 µm
BASF Coatings GmbH Mar 2015

Germany
328 TPC-AKD
1K Alkyd Topcoat, semi-glossy, DTM


534-575 g/l 319/270 m²/kg 388/345 m²/L ~56 % Gew.
Hardener -
SV12-0360
SV13-0701
3:1 Vol. 25-35 sec. 60-80 μm (2 coats) flash off 5-
- ~ 50 ± 10
13:1 Vol. >60 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 25-35 3:1 < 2,5 1.3-1.6
HVLP 25-35 3:1 ~2 1.3-1.7
Suction Cup 25-35 3:1 2-3 1.3-1.7
Airless / Airmix >60 13:1 60-120 0.23-0.28

Double Diaphragm or
- - - -
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C ~30 min 3h 36 h 7 Days > 7 days
60°C - - - - -

Germany
525 TPC-EPX
2K Epoxy Topcoat

Converter GK45-2103
SC65-0703 Slow
Application and properties: 2K Epoxy Topcoat

● good Anti-corrosive properties and chemical resistance
Bare steel SV22-0500 P80-150 SV22-0500
Undercoats 525 TPC-EPX can be used for all Salcomix primers.
Product details: Glossy Epoxy Topcoat typical suitable for painting of

industrial goods such as machinery, steel made construction
parts or even concrete floors. Usually these kinds of topcoats
are being used indoors as they tend to chalk and lose their
gloss when exposed to sunlight – which does not influence
the technical performance like good adhesion, corrosion
protection and chemical resistance.
Using hardener SC65-0703 provides higher gloss level!
< 0.1 µm

Germany
525 TPC-EPX
2K Epoxy Topcoat
Application: 2C solid Topcoat, glossy

Paint system 525 TPC-EPX 2K Topcoat

538-573 g/l 383/348 m²/kg 405/402 m²/L 44-54 % Gew.
Mixing ratio 525 TPC-EPX 100 % by weight 4 Vol.

SC65-0703
Hardener 20 % by weight 1 Vol.
SC65-0731
6h > 85
4:1:1 Vol. 58-64 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 24-28 4:1:2 < 2.5 1.3-1.4
HVLP 24-28 4:1:2 ~2 1.3-1.5
Suction Cup 24-28 4:1:2 2-3 1.3-1.5
Airless / Airmix 24-28 4:1:2 120-150 0.23-0.28

Double Diaphragm or
24-28 4:1:2 <4 1.0-1.1
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C (-0731/-0703) 1/2 h 15/30 h 24/36 h 12-15 Days < 5 days
60°C (-0731/-0703) - 30-45 min 60 min - -

Germany
526 TPC-EPX
2K Epoxy Topcoat, semi-glossy

Converter GK45-2204
SC65-0703 Slow
Application and properties: 2K Epoxy Topcoat, semi-glossy

Bare steel SV22-0500 P80-150 SV22-0500
Product details: Semi-glossy Epoxy Topcoat typical suitable for painting of

industrial goods such as machinery, steel made construction
parts or even concrete floors. Usually these kinds of topcoats
are being used indoors as they tend to chalk and lose their
gloss when exposed to sunlight – which does not influence
the technical performance like good adhesion, corrosion
protection and chemical resistance.
Using hardener SC65-0703 provides higher gloss level!
< 0.1 µm

Germany
526 TPC-EPX
2K Epoxy Topcoat, semi-glossy
Application: 2C solid Topcoat, semi-glossy


553-587 g/l 368/332 m²/kg 388/382 m²/L 43-52 % Gew.

SC65-0703
SC65-0731
6h ~ 50 ± 10
4:1:1 Vol. 58-64 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 24-28 4:1:2 < 2.5 1.3-1.4
HVLP 24-28 4:1:2 ~2 1.3-1.5
Suction Cup 24-28 4:1:2 2-3 1.3-1.5
Airless / Airmix 24-28 4:1:2 120-150 0.23-0.28

Double Diaphragm or
24-28 4:1:2 <4 1.0-1.1
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C (-0731/-0703) 1/2 h 8/12 h 15/24 h 12-15 Days < 5 days
60°C (-0731/-0703) - 30-45 min 60 min - -

Germany
595 TPC-EPX
2K Epoxy Topcoat, textured

Converter GK45-2201
Converter/Pastes 65:35 smooth
85:15 textured
SC65-0810
Application and properties: 2K Epoxy Topcoat, textured

● different structure effects can be achieved
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Product details: 595 is as an Epoxy Topcoat typical suitable for painting of

industrial goods offering smooth application or up to coarse
textured effects according to spray equipment and adjusting.
Usually these kinds of topcoats are being used indoors as
they tend to chalk and loose their gloss when exposed to
sunlight – which does not influence the technical performance
like good adhesion, corrosion protection and chemical
resistance.
< 0.1 µm

Germany
595 TPC-EPX


508-550 g/l 398/381 m²/kg 438/439 m²/L 45-58 % Gew.
4:1:2 Vol. > 40 sec. 6h ~ 40 ± 5
10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun > 40 4:1:2 < 2.5 1.3-1.4
HVLP > 40 4:1:2 ~2 1.3-1.5
Suction Cup > 40 4:1:2 2-3 1.3-1.5
Airless / Airmix > 40 4:1:2 120-150 0.23-0.28

Double Diaphragm or
> 40 4:1:2 <4 1.0-1.1
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C 1-2 h 6-8 h 20 h 10-12 Days < 5 days
60°C - 30-45 min 60 min - -

Germany
595 TPC-EPX

Paint system 595 TPC-EPX 2K Topcoat, textured

344-371 g/l 515/490 m²/kg 617/618 m²/L 69-73 % Gew.
Thinner SV32-0482 0-10 % by weight 0-10 %
high viskos Acc. to textured effect (see 2.4
6h ~ 40 ± 5
or "Textured Swatch)
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun - - - -
HVLP - - - -
Suction Cup - - - -
Double Diaphragm or
> 120 4:1+10% 0.5-1.5 1.5-2.0
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C - - - - -
60°C - 45 min 60 min - -

Germany
648 TPC-PUR
2K PUR Topcoat

SC29-0885 Slow
SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K PUR Topcoat

● good drying
coverings or cables
Undercoats 648 TPC-PUR can be used for all Salcomix primers.
Product details: 648 offers a good glossy level and fullness with good
abrasion resistance. Typical field of application would be
general metal industry (production and maintenance).
SC29-0885: Hardener Slow improves levelling on larger
surfaces and increases also the spraying safety at high
ambient temperatures.
SC27-0500: Hardener Fast leads to less weather and
chemical resistance compared to SC29-0863 and -0885
< 0.1 µm

Germany
648 TPC-PUR
2K PUR Topcoat

Paint system 648 TPC-PUR 2K Topcoat

511-563 g/l 403/363 m²/kg 413/431 m²/L 44-57 % Gew.
Mixing ratio 648 TPC-PUR 100 % by weight 3 Vol. 2 Vol.

SC29-0863 30 % by
- 1 Vol. -
SC29-0885 weight
Hardener
45 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
20 % by 30 % by
Thinner SV13-0701 1 Vol. 30 %
weight weight
SV15-0339
3:1:1 Vol.17-20 sec. 50-60 μm (2-3 coats) flash off 5-
4-5 h > 90
3:1:0.5 Vol.20-30 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 17-20 3:1:1 < 2.5 1.3-1.4
HVLP 17-20 3:1:1 ~2 1.3-1.5
Suction Cup 17-20 3:1:1 2-3 1.3-1.7
Airless / Airmix 20-30 3:1:0.5 120-150 0.23-0.28

Double Diaphragm or
17-20 3:1:1 <4 1.0-1.1
Pressure Pump
Brush & Roll 6:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C (-0863/-0500) 40/30 min 10/7 h 15/12 h 7-10 Days < 5 days
60°C (-0863/-0500) - 30 min 60 min - -

Germany
650 TPC-PUR
2K PUR Topcoat, semi-glossy

SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K PUR Topcoat, semi-glossy

● good drying
coverings or cables
Product details: 650 semi glossy offers similar properties as 648 full gloss.
Application area would be general metal industry (production
and maintenance).
Gloss level of 45 –50 can be obtained by using hardener
SC27-0500 and following flash off between the spray coats
(10-15 min.) and before oven drying (30 min.)
Using of hardener SC29-0863 leads to a higher gloss level.
Different colours also influence the gloss.
Less weather and chemical resistivity with hardener SC27-
0500.
< 0.1 µm

Germany
650 TPC-PUR
2K PUR Topcoat, semi-glossy


512-554 g/l 378/340 m²/kg 431/430 m²/L 50-60 % Gew.

30 % by
SC29-0863 - 1 Vol. -
weight
Hardener
40 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
15 % by 30 % by
weight weight
SV15-0339
3:1:1 Vol. 15-18 sec.
50-60 μm (2-3 coats) flash off
3:1:0.5 Vol. 18-20 sec. 3-4 h ~ 50 ± 10
10-15min. Between
3:1:0.25 Vol. 23-27 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 15-18 3:1:1 < 2.5 1.3-1.4
HVLP 15-18 3:1:1 ~2 1.3-1.5
Suction Cup 15-18 3:1:1 2-3 1.4-1.7
Airless / Airmix 23-27 3:1:0.25 120-150 0.23-0.28

Double Diaphragm or
15-18 3:1:1 <4 1.0-1.1
Pressure Pump
Brush & Roll 6:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C (-0863) 40 min 3-4 h 12 h 7-10 Days < 5 days
60°C (-0863) - 30 min 60 min - -

Germany
656 TPC-PUR
2K PUR Topcoat,

SC27-0500 Fast
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K PUR Topcoat,

Product details: 656 offers a perfect solution to enter the 2K topcoat markets
for objects such as common industrial goods and vehicles,
hang-on parts and equipment for agricultural industry,
machine building areas, earth-moving equipment, containers,
gardening tools and general metal working industry.
< 0.1 µm

Germany
656 TPC-PUR
2K PUR Topcoat,


560-604 g/l 360/337 m²/kg 365/378 m²/L 39-50 % Gew.

25 % by
SC29-0844 - 1 Vol. -
weight
Hardener
50 % by
SC27-0500 - - 1 Vol.
weight
SV13-0732
30 % by 30 % by
weight weight
SV15-0339
4:1:1 Vol.15-25 sec. 2h > 85
10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 15-25 4:1:1 < 2.5 1.3-1.4
HVLP 15-25 4:1:1 ~2 1.3-1.5
Suction Cup 15-25 4:1:1 2-3 1.4-1.7
Airless / Airmix 15-25 4:1:1 120-150 0.23-0.28

Double Diaphragm or
15-25 4:1:1 <4 1.0-1.1
Pressure Pump
Brush & Roll 8:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C (-0500/-0844) 8/12 h 16/24 h 24/36 h 10-12 Days within 24 h
60°C (-0500/-0844) - 45-60 min 60 min - -

Germany
603 TPC-ACR
2K Acrylic Topcoat
Resin base: 2-component acrylic resin

SC29-0885 Slow
SC29-0865
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat

● excellent UV resistance
● excellent surface hardness
Undercoats 603 TPC-ACR can be used for all Salcomix primers.
Product details: 603 is suitable for painting of objects where high performance
of the final result is requested such as high gloss level,
fullness, hardness, weather stability and appearance, i. e. for
agricultural and earth moving machines, industrial /
commercial vehicles, metal furniture.
SC29-0885: Hardener Slow improves levelling on larger
surfaces and increases also the spraying safety at high
ambient temperatures.
SC29-0865: Quick drying properties, 4 – 6 h at 20°C for
masking (FW ~ 4 h, Neutral Converter ~ 6 h)
< 0.1 µm

Germany
603 TPC-ACR
2K Acrylic Topcoat

Paint system 603 TPC-ACR 2K Topcoat

525-565 g/l 408/358 m²/kg 413/415 m²/L 43-55 % Gew.
Mixing ratio 603 TPC-ACR 100 % by weight 3 Vol.

SC29-0863
SC29-0865
SV13-0732
SV15-0339
3:1:1 Vol. 18-22 sec.
3:1:0.5 Vol. 22-26 sec. 3-4 h > 90
10 min. between
3:1:0.25 Vol. 26-36 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-22 3:1:1 < 2.5 1.3-1.4
HVLP 18-22 3:1:1 ~2 1.3-1.5
Suction Cup 18-22 3:1:1 2-3 1.4-1.7
Airless / Airmix 22-26 3:1:0.5 120-150 0.23-0.28

Double Diaphragm or
18-26 3:1:1 <4 1.0-1.1
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C (-0863/-0865) 30/20 min 6/3 h 12/8 h 7-10 Days < 5 days
60°C (-0863/-0865) - 30 min 60 min - -

Germany
605 TPC-ACR
2K Acrylic Topcoat

SC29-0863 Normal
SC29-0885 Slow
SV13-0701 Normal
SV15-0339 Slow

Product details: The 605 topcoat line is perfectly suited for applications with
high demands on gloss, build, hardness, weather resistance
and flow. Ideal fields of application are commercial vehicles,
agricultural and construction equipment coatings, machinery
and steel construction.
For airless application, we recommend using hardener
SC29-0823.
< 0.1 µm

Germany
605 TPC-ACR
2K Acrylic Topcoat


500-510 g/l 374/352 m²/kg 420/417 m²/L 54-57 % Gew.

SC29-0863 30 % by
- 1 Vol. -
SC29-0885 weight
Hardener
20 % by
SC29-0823 - - 1 Vol.
weight
SV13-0732
5-10 % by 10-15 % by
Thinner SV13-0701 5-10 % Gew. 10-15 % Gew.
weight weight
SV15-0339
3:1+5% Vol. 20-25 sec. 40-60 μm (2 coats) flash off 5-
4h > 90
5:1+10% Vol. 30-40 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-25 3:1+5% < 2.5 1.3-1.4
HVLP 20-25 3:1+5% ~2 1.3-1.5
Suction Cup 20-25 3:1+5% 2-3 1.4-1.7
Airless / Airmix 30-40 5:1+10% 60-120 0.23-0.28

Double Diaphragm or
30-40 5:1+10% <4 1.0-1.1
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C 90 min 5-6 h 12 h 7-14 Days < 5 days
60°C -

Germany
729 TPC-ACR
2K Acrylic Topcoat

Converter/Pastes 65 : 35 / 95 : 5
SC29-0885 Slow
SV13-0701 Normal
SV15-0339 Slow

● very good weathering and yellowing resistance and
surface hardness
● good drying
● Suitable for many metal substrates and for plastics.
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Product details: Adhesion depend aluminium alloy!

Direct adhesion to plastics or metals should always be
checked individually as the quality or compounds of the
material may differ from case to case!
The surface must be clean, dry and free from rust and other
contaminations.
< 0.1 µm

Germany
729 TPC-ACR
2K Acrylic Topcoat


547-576 g/l 391/343 m²/kg 394/390 m²/L 42-52 % Gew.

SC29-0863
SC29-0885
SV13-0732
SV15-0339
2:1+30% Vol.16-20 sec.
2:1+20% Vol.20-22 sec. 2h > 90
10 min. between
2:1+10% Vol.22-26 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-20 2:1+30% < 2.5 1.3-1.4
HVLP 16-20 2:1+30% ~2 1.3-1.5
Suction Cup 16-20 2:1+30% 2-3 1.3-1.7
Double Diaphragm or
20-26 2:1+20% <4 1.0-1.1
Pressure Pump
Brush & Roll 4:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C 20-30 min 5h 12 h 7-10 Days < 5 days
60°C - 30 min 60 min - -

Germany
730 TPC-ACR
2K Acrylic Topcoat

SV13-0701 Normal
SV15-0339 Slow

surface hardness
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium* SV22-0500 P150-180 SV22-0500
Product details: The semi-glossy 730 topcoat line can be directly applied to
various metal substrates, such as steel, galvanized steel and
aluminum. Thanks to the high solids content, it is easy to
achieve the necessary film thickness. Typical fields of
application are commercial vehicles, agricultural equipment,
machinery and steel construction.
< 0.1 µm

Germany
730 TPC-ACR
2K Acrylic Topcoat


435-470 g/l 389/346 m²/kg 499/492 m²/L 63-69 % Gew.

SV13-0732
Thinner SV13-0701 15 % by weight 15 % Gew.
SV15-0339
5:1+15% Vol. 20-25 sec. 60-80 μm (2 coats) flash off 5-
1.5 h ~ 50 ± 10
5:1+10% Vol. 30-35 sec. 10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-25 5:1+15% < 2.5 1.3-1.4
HVLP 20-25 5:1+15% ~2 1.3-1.5
Suction Cup 20-35 5:1+15% 2-3 1.3-1.7
Airless / Airmix 30-35 5:1+10% 60-120 0.23-0.28

Double Diaphragm or
- - - -
Pressure Pump
dust-dry Touch Dry
Assembling
Fully Cured Recoatable
Temp.
20°C 60 min 7h 15 h 7 Day < 5 days
60°C - - - -

Germany
732 TPC-ACR
2K Acrylic Topcoat, matt

Converter/Pastes 65 : 35 / 98:2
SC29-0885 Slow
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, matt

surface hardness
● good drying
● may be used for matting of ACR topcoats (pls. See 2.3)
Bare steel SV22-0500 P80-150 SV22-0500
Aluminium SV22-0500 P150-180 SV22-0500
Product details: Adhesion depends on the aluminium alloys!

contaminations.
< 0.1 µm

Germany
732 TPC-ACR
2K Acrylic Topcoat, matt
Application: 2C solid Topcoat, mat


584-622 g/l 314/268 m²/kg 348/353 m²/L 42-55 % Gew.

SC29-0863
SC29-0885
SV13-0732
SV15-0339
3:1:2 Vol.16-19 sec.
3:1:1 Vol.19-25 sec. 3-4 h ~ 10-15
10 min. between
3:1:0.5 Vol.25-30 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-19 3:1:2 < 2.5 1.3-1.4
HVLP 16-19 3:1:2 ~2 1.3-1.5
Suction Cup 16-19 3:1:2 2-3 1.3-1.7
Airless / Airmix - - -
Double Diaphragm or
19-25 3:1:1 <4 1.0-1.1
Pressure Pump
Brush & Roll 6:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C 15 min 5h 12 h 7-10 Days < 5 days
60°C - 30 min 60 min - -

Germany
821 TPC-ACR

Converter/Pastes 80 : 20 / 98:2
SC29-0844 Normal
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, semi-glossy

● good drying
Aluminium SV22-0500 P150-180 SV22-0500
Electrolytically galv. Steel SV22-0500 abrasive pad SV22-0500
sendzimir galv. Steel SV22-0500 abrasive pad SV22-0500
Product details: 821 is suited for multipurpose application, it can be used as a

smooth topcoat as well as for different kinds of fine or coarse
textured effects.
Best performance regarding uv-stability and chemical
resistance in combination with hardener SC29-0863.
contaminations.
< 0.1 µm

Germany
821 TPC-ACR


560-581 g/l 328/303 m²/kg 383/363 m²/L 49-55 % Gew.

SC29-0863
SC29-0844
SV13-0732
SV15-0339
4:1:2 Vol.18-24 sec.
4:1:1 Vol.25-40 sec. 2-3 h ~ 40 ± 5
10 min. between
4:1:0.5 Vol.>40 sec.
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 18-24 4:1:2 <2.5 1.3-1.4
HVLP 18-24 4:1:2 ~2 1.3-1.5
Suction Cup 18-24 4:1:2 2-3 1.3-1.7
Airless / Airmix 25-40 4:1:1 120-150 0.23-0.28

Double Diaphragm or
18-24 4:1:2 <4 1.0-1.1
Pressure Pump
Brush & Roll 8:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C 20 min 2-3 h 12 h 7-10 Days < 5 days
60°C - 30 min 60 min - -

Germany
821 TPC-ACR
Application: 2C solid Topcoat, semi-glossy, textured

Paint system 821 TPC-ACR 2K Topcoat, textured

424-456 g/l 418/382 m²/kg 532/507 m²/L 63-69 % Gew.

SC29-0863
SC29-0844
SV13-0732
SV15-0339
Acc. to textured effect (see 2.4
4:1 Vol. >50 sec. 1h ~ 40 ± 5
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun >50 4:1 0.5-1.5 2.0-2.5
HVLP >50 4:1 0.5 -1.5 2.0-2.5
Suction Cup >50 4:1 0.5-1.5 2.0-2.5
Double Diaphragm or
>50 4:1 0.5-1.5 1.2-1.7
Pressure Pump
Brush & Roll 8:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C - - 24-36 h 8-10 Days -
60°C - - 60-90 min - -

Germany
821 TPC-ACR

Paint system 821 TPC-ACR 2K Topcoat, coarse textured

387-423 g/l 437/396 m²/kg 573/545 m²/L 67-73 % Gew.
Thinner -
1h ~ 40 ± 5
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun - - -
HVLP - - -
Suction Cup - - -
Airless / Airmix - - -
Double Diaphragm or
> 120 8:1 0.5-1.5 1.2-1.7
Pressure Pump
Brush & Roll 8:1 + 5% SC29-0823 & GK69-0903
dust-dry Touch Dry
Assembling
Temp.
20°C - - 24-36 h 8-10 Days -
60°C - - 60-90 min - -

Germany
825 TPC-ACR

SC29-0885 Slow
SC29-0823 Normal
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, semi-glossy

Product details: The 825 topcoat line is suited for applications with high
demands on hardness and mechanical stress resistance.
For airless application, we recommend using hardener
SC29-0823. Various textured surface effects can be achieved
by setting the parameters nozzle size, spraying pressure and
viscosity. Smooth and fine to coarse surface textures can be
applied.
Fields of application are machinery and steel construction, for
example.
< 0.1 µm

Germany
825 TPC-ACR


496-510 g/l 378/340 m²/kg 432/416 m²/L 56-58 % Gew.
Mixing ratio 825 TPC-ACR 100 % by weight 10 Vol. 10 Vol.

SC29-0863 10 % by
- 1,5 Vol. -
SC29-0885 weight
Hardener
15 % by
SC29-0823 - - 1 Vol.
weight
SV13-0732
10 % by
Thinner SV13-0701 5 % by weight 10 % Gew. 5 % Gew.
weight
SV15-0339
10:1.5+10% Vol. >60 sec. 60-80 μm (2 coats) flash off 5-
4h ~ 50 ± 10
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun >60 10:1.5+10% < 2.5 1.3-1.8
HVLP >60 10:1.5+10% ~2 1.4-1.9
Suction Cup >60 10:1.5+10% 2-3 1.3-1.9
Airless / Airmix >120 10:1+5% 60-120 0.23-0.33

Double Diaphragm or
- - - -
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C 40 min 2h 15 h 5-7 Days < 5 days
60°C - - - -

Germany
900 TPC-ACR
2K Acrylic Topcoat, VOC

Hardener SC29-0331
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, VOC

surface hardness
● high efficiency
● VOC compliant
Product details: 900 is a VOC compliant high glossy topcoat, offering time-
and material saving application. Suitable for painting of goods
in line production, large areas, agricultural machinery and
equipment, industrial vehicles and general industrial goods
where a good final aspect is required.
Special Remark: 2004/42/IIB(d)(420)419 The EU limit value for this product

(product category: d) in ready to use form is max. 420 g/l.
< 0.1 µm

Germany
900 TPC-ACR


<420 g/l 504/434 m²/kg 546/470 m²/L 61-71 % Gew.
Neutral Full White
Mixing ratio 900 TPC-ACR 100 % by 100 % by 3 Vol.
weight weight
35 % by 25 % by
Hardener SC29-0331 1 Vol.
weight weight
SV13-0732
20 % by 15 % by
Thinner SV13-0701 25 %
weight weight
SV15-0339
50-60 μm (1,5 coats) Pre-Spray
3:1+20% Vol. 24-28 sec. half a coat followed by a fully 2h > 90
closed coat immediately
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 24-28 3:1+20% < 2.5 1.3-1.4
HVLP 24-28 3:1+20% ~2 1.3-1.5
Suction Cup 24-28 3:1+20% 2-3 1.3-1.7
Double Diaphragm or
24-28 3:1+20% <4 1.0-1.1
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C 2h 5h 12 h 7-10 Days < 5 days
60°C - 30 min 45 min - -

Germany
901 TPC-ACR
2K Acrylic Topcoat, VOC, semi-glossy

Hardener SC29-0331
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, VOC, semi-glossy

surface hardness
● high efficiency
● VOC compliant
Product details: 901 VOC semi glossy offers time- and material saving
application. According to mixing ratio and spray equipment
smooth or textured application is possible. Suitable for
painting of large areas, agricultural machinery and
equipment, industrial vehicles, earthmoving machines and
general industrial goods.
Special Remark: 2004/42/IIB(e)(840)478 The EU limit value for this product

(product category: e) in ready to use form is max. 840 g/l.
< 0.1 µm

Germany
901 TPC-ACR


426-478 g/l 440/389 m²/kg 525/462 m²/L 59-69 % Gew.

SV13-0732
Thinner SV13-0701 15 % by weight 25 %
SV15-0339
6:1+25% Vol. 20-22 sec. 50-60 μm (1,5 coats) Pre-Spray
6:1+20% Vol. ~25 sec. half a coat followed by a fully ~2 h ~ 50 ± 10
6:1+10% Vol. 40-50 sec. closed coat immediately
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-22 6:1+25% < 2.5 1.3-1.4
HVLP 20-22 6:1+25% ~2 1.3-1.5
Suction Cup 20-22 6:1+25% 2-3 1.3-1.7
Double Diaphragm or
20-22 6:1+25% <4 1.0-1.1
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C (-0863) 1h 3h 12 h 7-10 Days < 5 days
60°C (-0863) - 30 min 45 min - -

Germany
901 TPC-ACR


325-390 g/l 506/441 m²/kg 637/555 m²/L 68-78 % Gew.
Thinner
~1,5 h ~ 50 ± 10
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun >120 6:1 0,7-0,9 >2mm
HVLP >120 6:1 0,7-0,9 >2mm
Suction Cup - - - -
Double Diaphragm or
>120 6:1 0,7-1 1.5-2.0
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C (-0863) 24 h
60°C (-0863) 45 min

Germany
902 TPC-ACR

SV15-0339 Slow
Application and properties: 2K Acrylic Topcoat, VOC

surface hardness
● high efficiency
● VOC compliant
Product details: The 902 line with high gloss is VOC compliant and perfectly
suited for applications with high demands on gloss, build,
hardness, weather resistance and flow. Ideal fields of
application are commercial vehicles, agricultural and
construction equipment coatings and machinery construction.
Special Remark: 2004/42/IIB(d)(420)419 The EU limit value for this product

(product category: d) in ready to use form is max. 420 g/l.
< 0.1 µm

Germany
902 TPC-ACR


419 g/l 426/397 m²/kg 517 m²/L 65-68 % Gew.

SV13-0701
Thinner 15 % by weight 15 % Gew.
SV15-0339
50-60 μm (1,5 coats) Pre-Spray
3:1+15% Vol. 20-25 sec.
half a coat followed by a fully 2h > 90
3:1+10% Vol. 25-30 sec.
closed coat immediately
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 20-25 3:1+15% < 2.5 1.3-1.4
HVLP 20-25 3:1+15% ~2 1.3-1.5
Suction Cup 20-30 3:1+10% 2-3 1.3-1.7
Airless / Airmix 25-30 3:1+10% 80-100 0.23-0.28

Double Diaphragm or
- - - -
Pressure Pump
dust-dry Touch Dry
Assembling
Temp.
20°C 60 min 4h 15 h 7-14 Days < 5 days
60°C - - - -

Germany
850 BCT-MPS
1K Basecoat
Resin base: 1-component polyester resin

Converter GK39-2301
SV13-0701 Normal
SV15-0339 Slow
Application and properties: 1K Basecoat

● good hiding power
● good leveling
● outstanding application characteristics
2K- Undercoats Salcomix 2K Wash Primer, Salcomix 2K PUR Surfacer,
Salcomix 2K Epoxy Primer Filler
Product details: Basecoat 850 combined with Salcomix clearcoat “Ergoclear”

and "Ergomatt" is suitable for a wide range of industrial paint
jobs.
850 as a one layer metallic, matt, put 5% Ergoclear and 15%
GJ50-0004 (Salcomat 2) into the Basecoat, then adjust
100:20:50 with SC26-0200 and SV13-0732, 2 – 3 spray
coats, drying 30 Min. 60°C + 8 – 10 h overnight.
Different mixing order of ingredients if pigment paste GJ50-
0001 and/or GJ50-3014 is contained in the desired mixing
formula. 1.) Stir the base material well. 2.) Add 850 BCT-MPS
to the paste mixture and mix.
< 0.1 µm

Germany
850 BCT-MPS
1K Basecoat
Resin base: 1-component polyester resin
Application: 1C Basis coat

Paint system 850 BCT-MPS 1K Basecoat

755-770 g/l 173/150 m²/kg 161/139 m²/L 17-21 % Gew.
Mixing ratio 850 BCT-MPS 100 % by weight 2 Vol.
Hardener -
SV13-0732
SV15-0339
15-20 μm (2 spray coats to
2:1 Vol. 16-20 sec. - matt
cover + ½ to match the effect
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-20 2:1 < 2.5 1.3-1.4
HVLP 16-20 2:1 ~2 1.3-1.5
Suction Cup 16-20 2:1 2-3 1.4-1.5
Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll
Drying at Object Temp. Flash Off dust-dry Touch Dry Recoatable

20°C 10-15 min 10 min - -
60°C - - 30 min -

Germany
860 CC-ACR
2K Acrylic Clear Ergoclear, glossy

SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Clear Ergoclear, glossy

● fast drying
surface hardness
Substrates: 850 BCT-MPS 1K Basecoat
Product details: Salcomix Ergoclear for Basecoat 850 is an easy to spray

clearcoat, suitable for a wide range of industrial paint jobs
such as bicycle manufacturing, (metal-) furniture, sport
equipment, motorized two-wheelers, industrial vehicles,
housings of electric- or entertainment industry, carousels and
so on. Line 850 with Ergoclear fulfils high demands regarding
a high gloss level, fullness, hardness, weather stability and
final appearance.
< 0.1 µm

Germany
860 CC-ACR
2K Acrylic Clear Ergoclear, glossy
Application: 2C Clear coat

Paint system 860 CC-ACR 2K Acrylic Clear Ergoclear

~580 g/l 362 m²/kg 346 m²/L ~40 % Gew.
Mixing ratio 860 CC-ACR 100 % by weight 2 Vol.

SV13-0732
SV15-0339
2:1 Vol. 16-18 sec. 2-3 h > 90
10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-18 2:1 < 2.5 1.3-1.4
HVLP 16-18 2:1 ~2 1.3-1.5
Suction Cup 16-18 2:1 2-3 1.4-1.5
Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C 2h 4h >12 h 7-10 Days -
60°C - 30 min 45 min - -

Germany
860 CC-ACR
2K Acrylic Clear Ergomatt

SV13-0701 Normal
SV15-0339 Slow
Application and properties: 2K Acrylic Clear Ergomatt

● fast drying
Substrates: 850 BCT-MPS 1K Basecoat
Product details: Salcomix Ergomatt for Basecoat 850 is an easy to spray

clearcoat, suitable for a wide range of industrial paint jobs
such as bicycle manufacturing, (metal-) furniture, sport
equipment, motorized two-wheelers, industrial vehicles,
housings of electric- or entertainment industry, carousels and
so on. Line 850 with Ergomatt fulfils high demands regarding
a matt gloss level, fullness, hardness, weather stability and
final appearance.
< 0.1 µm

Germany
860 CC-ACR
2K Acrylic Clear Ergomatt
Application: 2C Clear coat

Paint system 860 CC-ACR 2K Acrylic Clear, matt

~610 g/l 282 m²/kg 281 m²/L ~36 % Gew.
Mixing ratio 860 CC-ACR 100 % by weight 2 Vol.

SV13-0732
SV15-0339
2:1+45% Vol. 16-18 sec. 3h ~ 10
10 min. between
Spraying
Viscosity Nozzle
(sec) (mm)
(bar)
Compliant Gun 16-18 2:1+45% < 2.5 1.3-1.4
HVLP 16-18 2:1+45% ~2 1.3-1.5
Suction Cup 16-18 2:1+45% 2-3 1.4-1.5
Double Diaphragm or
- - - -
Pressure Pump
Brush & Roll
dust-dry Touch Dry
Assembling
Temp.
20°C 3h 4h >12 h 7-10 Days -
60°C - 30 min 45 min - -

Germany
Brush and Roll Additive
Application: GK69-0903, Additive for the application of Salcomix 2K Acrylic or PUR Topcoats by
brush or roll.
Properties: Needs to be mixed with hardener SC29-0823 for brush application.
Remarks: RFU product dries very fast on the surface. You should therefore use the product for larger
areas only in exceptional cases!
Special Remarks: It cannot be ruled out that this product contains particles < 0.1 µm The products are
suitable for professional use only .
Paint system GK69-0903 Brush and Roll Additive

Salcomix Topcoats
Mixing ratio 2K Primer Filler, Topcoat (ACR or PUR)
Hardener acc. to data sheet of corresponding product
Thinner 5 % by weight
Verarbeitung
Plane and smooth surfaces:

High quality Paint Roller made of foam with a fine pored surface,
rounded down or dished (concave) on both ends to minimize
formation of stripes and edges.
Brush & Roll
Uneven surfaces:
flocked or hairy (velours) foam paint roller are more suitable for
uneven areas (more flexible).
Ready for
20°C - - - -
60°C - - - -

Germany
Plasticser
Application: GK69-2910, Plasticiser for plastics refinishing

Properties: Flexible, easy to mix in, for painting of flexible plastic parts
Remarks: Amount to be added: 25% by vol., drying time is slower with GK69-2910, increases gloss
level of matt topcoats
Paint system GK69-2910 Plasticser

Salcomix 2K ACR- and PUR Topcoats
4 Vol. 2K ACR or PUR topcoat / primer / Ergoclear
Mixing ratio Pre-Mix
1 Vol. GK69-2910
Thinner acc. to data sheet of corresponding Topcoat
Ready for
20°C - - - -
60°C - - - -

Germany
Salcomat 2
Application: GJ50-0004 , Matting paste for all topcoats and for Ergoclear
Properties: Easy to mix in. Gloss level depending on product, temperature, film thickness, flash off,
drying, color and so on.
Remarks: Prepare only the quantity of paint that will be used the same day because the gloss level
may change when the mixture is stored! Mix paint well after addition of matting paste!
Paint system Salcomat 2 Matting Paste

Salcomix Topcoats Salcomix Topcoats
semi-gloss semi-gloss
1. Step
100% by weight TPC 25% by 100% by weight Ergoclear 25%
Mixing ratio
weight GJ50-0004 by weight GJ50-0004
satin gloss satin gloss
silky mat silky mat
acc. to data sheet of
Hardener 2:1 Vol. SC26-0200
corresponding Topcoat
acc. to data sheet of
Thinner -
corresponding Topcoat
Ready for
20°C - - - -
60°C - - - -

Germany
Texture Paste
Application: GJ50-0032 Additive for fine textured finishes and gloss reduction
Properties: Provides a fine textured effect in the surface
Remarks: Do not strain the material!
Special Remarks: The products are suitable for professional use only.
Paint system GJ50-0032 Texture Paste

Salcomix 2K ACR-, PUR-Topcoats, 2K Clearcoat
100% by weight TPC-ACR / -PUR topcoat or Ergoclear
50% by weight Texture Paste GJ50-0032
Ready for
20°C - - - -
60°C - - - -

Germany
Activator Plus
Application: GK69-2911-0111, thinned activator; reduces potlife; suitable for all TPC-ACR/-PUR
products, 2K PU Surfacer and Ergoclear
Properties: Improves spraying safety, surface drying and curing (especially at temperatures below
10°C, tape resistance; for panel repairs)
Remarks: Risk of loss of gloss in topcoat/clearcoat when too much Activator is added.
Paint system GK69-2911-0111 Activator

100% by weight 2K ACR / PUR topcoat or primer / Ergoclear
2,5-5% by weight GK69-2911-0111
acc. to data sheet of corresponding Topcoat
Thinner
(add less thinner according to amount of GK69-2911-0111)
Ready for
20°C - - - -
60°C - - - -

Germany
Thickener
Application: GJ50-0067, thixotropic additive suitable for all Salcomix primers and topcoats
Properties: Enhances spraying safety (improvement of sagging resistance) and film build. Can be
used to achieve a coarser textured effect (i. e. for 821, 595, 901 textured topcoats).
Paint system GJ50-0067 Thickener

Salcomix Undercoats / Topcoats / Ergoclear
100 % by weight Salcomix Undercoat / Topcoat or Ergoclear
10 % by weight GJ50-0067
Ready for
20°C - - - -
60°C - - - -

Germany
TXT Flow
Application: GJ50-0030, Additive for fine textured finishes and gloss reduction
Properties: For really fine textured effect in topcoats
Paint system GJ50-0030 TXT Flow

100 % by weight TPC-ACR / -PUR or Ergoclear
10 – 20 % by weight TXT Flow GJ50-0030
Ready for
20°C - - - -
60°C - - - -

Germany
Plate Like
Application: GJ50-7001 can be used with all topcoats of the Salcomix product portfolio.
Properties: For decorative metal surfaces => See Colour Tool Salcomix Plate Like Additiv
Paint system GJ50-7001 Plate Like

Salcomix Topcoats
Amounts as in mixing formula on PaintFinder Software or
Mixing ratio Pre-Mix 100% by weight TPC-ACR / -PUR

+ 10 - 30% by weight GJ50-7001
+ GJ50-Metallic & Color Giving Dispersions
Ready for
20°C - - - -
60°C - - - -

Germany
Airless Additive
Application: GK69-0901 is suitable for all TPC-ACR / -PUR topcoats, 2K PU Surfacers.

Properties: Improves flow and prevents solvent boil at high application temperatures, can also be used
for normal spray gun application
Remarks: Must be added to the topcoats for airless / airmix application to prevent pinholing.
Paint system GK69-0901 Airless Additive

Salcomix 2K PUR-Undercoats, 2K ACR-, PUR-Topcoats, 2K
Salcomix Clearcoats
100 % by weight 2K ACR or PUR topcoat / primer / Ergoclear
2-5 % GK69-0901
acc. to data sheet of corresponding product
Thinner
(add less thinner according to amount of GK69-2911)
Ready for
20°C - - - -
60°C - - - -

Germany
Electrostatic Additiv
Application: GK69-0902 is used to optimally adjust the paint material’s ohm resistance to the
equipment used (please refer to the manufacturer’s instructions). Can be used with
all PU surfacers, TPC-AKD / TPC-ACR / PU Topcoats and Ergoclear.
Properties: Improves the transfer efficiency in electrostatic application (reduces the kOhm value).
Product will slow down the drying process of the paint.
Remarks: In case of exceeding the amount of GK69-0902 the ohm resistance might go down to zero
Paint system GK69-0902 Electrostatic Additiv

Salcomix 2K PUR-Undercoats, 2K ACR-, PUR-Topcoats, 2K
Salcomix Clearcoats
100% by weight 2K ACR or PUR topcoat / primer / Ergoclear
0,5 - 1% GK69-0902
Ready for
20°C - - - -
60°C - - - -

Germany
processing and application of our products, these data do not relieve processors from carrying out their own investigati ons and tests;

Salcomix Painting Manual

Uploaded by

Copyright:

Available Formats

Salcomix Painting Manual

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Salcomix Painting Manual

Uploaded by

Copyright:

Available Formats

Salcomix Painting Manual

Universal and flexible paint systems

Undercoat Material Hardener Thinner Shelf Life*

BASF Coatings GmbH May 2015

Undercoat Material Hardener Thinner Shelf Life*

BASF Coatings GmbH May 2015

Undercoat Material Hardener Thinner Shelf Life*

Topcoats Hardener Thinner Shelf Life*

BASF Coatings GmbH May 2015

Topcoats Hardener Thinner Shelf Life*

648 TPC-PUR SC29-0863 SV13-0732

650 TPC-PUR SV13-0732

656 TPC-PUR SV13-0732

BASF Coatings GmbH May 2015

Topcoats Hardener Thinner Shelf Life*

*Hardener SC27-0500 is not recommended for topcoats as chemical and

BASF Coatings GmbH May 2015

Additional products Code Shelf Life*

* Shelf life  store sealed products at temperatures between + 5° & + 25° C!

Ready mixed colours

BASF Coatings GmbH May 2015

GJ50-0001 WHITE GJ50-9002 LONDON BLACK

BASF Coatings GmbH May 2015

Products needed: Body Filler GK03-2800

Application and properties: Non-Ferro Body filler

Can be overcoated with: PRM-AKD, PRM-EPX, PRM-PUR, PRM-PVB

Product details: Remove corrosion (e.g., rust) by sanding or blasting.

Special Remark: 2004/42/IIB(cII)(250)190 The EU limit value for this product

BASF Coatings GmbH Feb 2015

Application: Coarse and Fine Body Filler

Paint system 103 BOF-UPE Non-Ferro Filler

Hardener SB48-3800 2-3 % by weight

BASF Coatings GmbH Feb 2015

Products needed: Converter GK17-1700

Application and properties: 1K Plastic Primer

Can be overcoated with: PRM-AKD, PRM-PUR, PRM-EPX, TPC-AKD, TPC-PUR,

BASF Coatings GmbH Feb 2015

Application: 1K Plastic Adhesion Primer

Paint system 117 PRM-CPO 1K Plastic Primer

Suction Cup ~ 12 - 2-3 1,4-1,7

Drying at Object Temp. dust-dry Flash Off Touch Dry Recoatable

BASF Coatings GmbH Feb 2015

Products needed: Converter GL60-1370

Application and properties: 1K Washprimer

Can be overcoated with: PRM-EPX, PRM-PUR, PRM-AKD, TPC-ACR, TPC-AKD,

Special Remark: 2004/42/IIB(cIII)(780)695 The EU limit value for this product

BASF Coatings GmbH Apr 2015

Paint system 261 PRM-PVB 1K Washprimer

HVLP 35-45 4:1 ~2 1.3-1.5

Suction Cup 35-45 4:1 2-3 1.3-1.4

Airless / Airmix >60 8:1 60-120 0.23-0.28

BASF Coatings GmbH Apr 2015

Products needed: Converter GL60-7035

Application and properties: Washprimer, grey

Can be overcoated with: PRM-PUR, PRM-EPX, TPC-AKD, TPC-ACR, TPC-PUR,

Special Remark: 2004/42/IIB(cIII)(780)740 The EU limit value for this product

BASF Coatings GmbH Apr 2015

Paint system 260 PRM-PVB Washprimer

Hardener SC10-0710 40 % by weight 1 Vol.