Scribd
Upload
77 views1 page

ZSCC

The Zeta addressable sounder circuit controllers (ZSCC & ZSCC/4) connect conventional alarm devices like sounders, flashers or bells to Zeta addressable fire alarm systems. They have 1 or 4 sounder circuits and receive power from an external 24V supply. LED indicators show alarm, fault and isolator status. They isolate the loop in case of wiring faults while continuing to power connected devices.

Uploaded by

Ватроспас Д.О.О.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views1 page

ZSCC

The Zeta addressable sounder circuit controllers (ZSCC & ZSCC/4) connect conventional alarm devices like sounders, flashers or bells to Zeta addressable fire alarm systems. They have 1 or 4 sounder circuits and receive power from an external 24V supply. LED indicators show alarm, fault and isolator status. They isolate the loop in case of wiring faults while continuing to power connected devices.

Uploaded by

Ватроспас Д.О.О.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Analogue Addressable Fire Alarm Systems /

Zeta Addressable Sounder Circuit Controller


(ZSCC, ZSCC/4)

The Zeta addressable sounder circuit


controllers (ZSCC & ZSCC/4) are used to
connect any conventional alarm warning
devices (for instance sounders, flashers or
bells) to any Zeta addressable fire alarm
system. It needs external power to be supplied
from a suitable 24 V power supply.
The unit has a built in loop short circuit isolator to help
keep the unit operational in the event of a problem on
the loop wiring.

It has 3 indication LEDs on the front of the unit, one for


alarm, one for local fault and one for addressable loop
fault (isolator active).

Model ZSCC ZSCC/4


Part No. 48-110 48-111
Interface Unit Number of 1 4
Sounder Circuits
Operating Voltage 17 – 33V DC
Quiescent Current 900uA (6.8 mA from ext PSU)
Serial No

ZIU Pt No: 48-100 Alarm Current 10.6mA (10mA + 42.4mA (10mA per
ZIOU Pt No: 48-105
ZSCC Pt No: 48-110 Snd Supply sounder load from circuit + sounder
PSU) load from PSU)
Hundreds Tens Units Fault Current 2.8mA (10mA from PSU)
901 901 901
Isolating Current 7.3mA (6.8 mA from ext PSU)
78

78

78
23

23

23

456 456 456

Address

Sounder End of 47K


Line
Line Monitoring Open & Short Circuit
Quad Sounder Unit Conditions
Snd 1 O/P Snd 2 O/P Snd 3 O/P Snd 4 O/P Sounder Output 1 Amp (If Ext PSU Allows)
Operating 0oC to 50oC
Line
Isolated
Loop In/Out

Snd Snd Snd Snd Snd Snd Snd Snd


Temperature
Active Fault Active Fault Active Fault Active Fault

Maximum Humidity 95% RH Non Condensing


IP Rating IP 43
Serial No Size 127 x 88 x 59mm 195 x 143 x 79mm
Weight 220g 400g

Hundreds Tens Units Snd Supply


901 901 901
78

78

78
23

23

23

456 456 456

Address

Issue #4 Issue Date XX/XX/XXX Revision #2

You might also like