Scribd
Upload
39 views4 pages

STANAGCOMP-IS A00.cleaned

The STANAGCOMP-IS is a standalone converter that accepts a STANAG3350 Class A video input and outputs composite PAL, NTSC, or RS-170 analog video. It features digital signal processing to convert the STANAG3350 interlaced RGB signal to progressive composite output. As an intelligent standalone device with an onboard microprocessor, it does not require a host CPU or software. Applications include aerospace and marine instrumentation, border security, and remote video surveillance.

Uploaded by

Sanjay Parelkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views4 pages

STANAGCOMP-IS A00.cleaned

The STANAGCOMP-IS is a standalone converter that accepts a STANAG3350 Class A video input and outputs composite PAL, NTSC, or RS-170 analog video. It features digital signal processing to convert the STANAG3350 interlaced RGB signal to progressive composite output. As an intelligent standalone device with an onboard microprocessor, it does not require a host CPU or software. Applications include aerospace and marine instrumentation, border security, and remote video surveillance.

Uploaded by

Sanjay Parelkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

STANAGCOMP-IS

Stanag3350-to-PAL/NTSC/RS-170 converter

The STANAGCOMP-IS is an intelligent stand-alone scan


converter that accepts a STANAG3350 Class A input and
outputs Composite PAL/NTSC/RS-170.

Convert

STANAG3350

Class A

to

Analog
The STANAGCOMP-IS features high speed analog signal
digitization, video scaling, frame rate conversion and a timing
generator. This provides seamless and automatic conversion
Composite
of STANAG3350 Interlaced RGB signals to progressive analog
Composite output. PAL/NTSC/RS-170
The STANAGCOMP-IS accepts STANAG3350 video as separate
red, green, blue signals with the video synchronization pulse
embedded in the green signal.

The STANAGCOMP-IS is an intelligent stand -alone device with


it’s own on-board MPU and does not require a host CPU or
any driver software. For mechanical convenience the module
can be mounted on a PCI-104 stack without consuming host
CPU resources.

Rev A.01
Subject to change without notification

Advanced Micro Peripherals Ltd Advanced Micro Peripherals Inc


Cambridge, CB6 2HY, England New York, NY10016, USA
Tel (+44) 1353 659500 Tel (+1) 212 951 7205
Fax (+44) 1353 659600 Fax (+1) 212 951 7206
[email protected] [email protected]
http://www.ampltd.com http://www.amp-usa.com
STANAGCOMP-IS
Stanag3350-to-PAL/NTSC/RS-170 converter

On-board

MPU

for

Intelligent,

Stand-alone

Operation
Applications

Aerospace instrumentation

Instrument panel

Multi-function display (MFD)

Situational Awareness

Remote Video Surveillance

Naval/Marine instrumentation

Border Security

Traffic Monitoring and Control

Video Acquisition and Analytics

Advanced Micro Peripherals Ltd Advanced Micro Peripherals Inc


Cambridge, CB6 2HY, England New York, NY10016, USA
Tel (+44) 1353 659500 Tel (+1) 212 951 7205
Fax (+44) 1353 659600 Fax (+1) 212 951 7206
[email protected] [email protected]
http://www.ampltd.com http://www.amp-usa.com
STANAGCOMP-IS
Stanag3350-to-PAL/NTSC/RS-170 converter

Aerospace and

Marine
STANAGCOMP-IS Functional Diagram

Instrumentation

Border

Security
Features

Converts STANAG3350 Class A to standard Composite

Separate RGB inputs with sync -on-green

Supports Composite PAL/NTSC output

Single +5V power supply

Stand-alone operation

Operating system neutral

Standard PCI-104 mechanical form factor

Advanced Micro Peripherals Ltd Advanced Micro Peripherals Inc


Cambridge, CB6 2HY, England New York, NY10016, USA
Tel (+44) 1353 659500 Tel (+1) 212 951 7205
Fax (+44) 1353 659600 Fax (+1) 212 951 7206
[email protected] [email protected]
http://www.ampltd.com http://www.amp-usa.com
STANAGCOMP-IS Rev A.01

Stanag3350-to-PAL/NTSC/RS-170 converter Technical Specification

Analog Video Input Ordering Information


Compliant with STANAG3350 Class A.
STANAG3350 Class A 875 lines @ 30fps (based on RS-343) STANAGCOMP-IS-A
Separate Red / Green / Blue input with Sync-on-green Stanag3350 Class A to PAL/NTSC/RS-170 converter (0 to 60˚C)
3x 10bit analog-to-digital converters
STANAGCOMP-IS-A-EXT
Analog Video Output Stanag3350 Class A to PAL/NTSC/RS-170 converter (-40˚C to
PAL/NTSC/RS-170 (Composite) +85˚C)
10bit digital-to-analog conversion
Cable-STANAGCOMP
Video Output Resolutions
Cable set for STANAGCOMP-IS
Standard PAL or NTSC (3x u.FL-to-BNC coax input cables, 1x Composite output cable)
Miscellaneous
Intelligent stand-alone module, does not require host computer
Standard 3.6 x 3.8in PCI-104 form factor
Mechanical mounting for PCI-104 stack
Single +5V supply
Operating temp 0˚C to 60˚C
Operating temp –40˚C to +85˚C (extended temp option)
Related Products
H264-HD2000 - HD H.264 Compression card for PC/104-Plus

STANAGCOMP-IS

Advanced Micro Peripherals Ltd Advanced Micro Peripherals Inc


Cambridge, CB6 2HY, England New York, NY10016, USA
Tel (+44) 1353 659500 Tel (+1) 212 951 7205
Fax (+44) 1353 659600 Fax (+1) 212 951 7206
[email protected] [email protected]
http://www.ampltd.com http://www.amp-usa.com

You might also like