Scribd
Upload
40 views2 pages

Comandos Mikrotic

This document provides instructions for configuring wireless settings, running speed tests, setting up RADIUS authentication, configuring SNMP, NTP, and email settings for backups, and checking signal quality for a network device. It also lists APNs for major Colombian carriers and an L2TP route for connecting M2M devices.

Uploaded by

yairmartinez112470
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
40 views2 pages

Comandos Mikrotic

This document provides instructions for configuring wireless settings, running speed tests, setting up RADIUS authentication, configuring SNMP, NTP, and email settings for backups, and checking signal quality for a network device. It also lists APNs for major Colombian carriers and an L2TP route for connecting M2M devices.

Uploaded by

yairmartinez112470
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

* ver aprendizaje me mac

interface bridge host print where on-interface=ether1

** forzar a 4G
at+cnmp=38
** Señal en automatico
at+cnmp=2

** comando para sacar señal de antena


interface wireless registration-table print oid

**SEÑAL DE WIRELLES
interface wireless registration-table print oid

**PRUEBA DE VELOCIDAD
tool speed-test user=argelis.mesa password=n3tb34m2022 address=8.8.8.8

** Raduis
/snmp community
set [ find default=yes ] addresses=172.24.11.0/24,172.24.20.0/24 \
write-access=yes
/ip route
/radius
add address=172.24.20.4 secret=AJkqXjjvTRf6vHJK service=login
add address=172.24.20.4 secret=AJkqXjjvTRf6vHJK service=login
/snmp
set [email protected] enabled=yes location=Netbeam trap-target=\
172.24.11.24,172.24.20.3 trap-version=2
/system clock
set time-zone-name=America/Bogota
/system ntp client
set enabled=yes primary-ntp=10.20.1.1 secondary-ntp=10.20.3.1
/user aaa
set default-group=full use-radius=yes
/tool e-mail
set address=40.97.48.98 [email protected] password=Netbeam2018
port=587 start-tls=yes user=\
[email protected]
/system script
add dont-require-permissions=no name=Backup-config owner=javier.garcia policy=\
ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon
source="/export file=([/system identity get name] \
. \"-\" . \\\
\n[:pick [/system clock get date] 7 11] . [:pick [/system clock get date] 0
3] . [:pick [/system clock get date] 4 \
6]); \\\
\n/tool e-mail send to=\"[email protected]\" subject=([/system identity get
name] . \" rsc \" . \\\
\n[/system clock get date]) file=([/system identity get name] . \"-\" . [:pick
[/system clock get date] 7 11] . \\\
\n[:pick [/system clock get date] 0 3] . [:pick [/system clock get date] 4 6] .
\".rsc\"); :delay 10; \\\
\n/file rem [/file find name=([/system identity get name] . \"-\" . [:pick
[/system clock get date] 7 11] . \\\
\n[:pick [/system clock get date] 0 3] . [:pick [/system clock get date] 4 6] .
\".rsc\")]; \\\
\n:log info (\"System Backup emailed at \" . [/sys cl get time] . \" \" . [/sys
cl get date])"
________________________________________________

los L2TP de todos los M2M deben conectar a las


190.242.99.116

APN CLARO: internet.comcel.com.co 0 ba.amx


APN MOVISTAR: internet.movistar.com.co
APN TIGO: web.colombiamovil.com.co

Ruta de CWC para salir M2M con el L2TP


190.242.99.112/28 gateway 4G

10.6.3.222

system serial-terminal usb1 ch


annel=3

[Ctrl-A is the prefix key]

at+csq

+CSQ: 31,99
at+cops?

NB100001634

You might also like