HA13164AH

Multiple Voltage Regulator for Car Audio

REJ03F0139-0200
Rev.2.00
Jan 16, 2007

Description
The HA13164AH is a compact multiple voltage regulator for car audio system. The outputs of this IC output consist of
regulated 5.7 V output for a microcontroller, regulated 8 V output for CD driver, regulated 9.0 V output for audio
control, regulated 10 V output for illuminations and regulated 5 V output, VCC-dependent output for external output
and VCC-dependent output for remote-ANT.

Functions

General
• ACC power monitor circuit is built-in as to detect low voltage.
• Low saturation output (PNP output) used for audio output.
• Adjustable voltage for illumination output by changing an external resistor.

Protections
• Output current limit circuit to avoid device destruction caused by shorted output, etc.
• High surge input protector against VCC and ACC.
• Built in a thermal shutdown circuit to prevent against the thermal destruction.

Rev.2.00 Jan 16, 2007 page 1 of 16

HA13164AH

Pin Description and Equivalent Circuit

Function
Pin Surge
No. Pin Name Specification Equivalent Circuit Normal Operation TSD Input
1 EXT OUT VCC-1 V/300 mA min Vcc Output voltage is VCC-1 0V 0V
Vcc V when M or H level
applied to CTRL pin.
2 ANT OUT VCC-1 V/300 mA min Output voltage is VCC-1 0V 0V
V when M or H level to
90 kΩ CTRL pin and H level to
ANT-CTRL.
10 kΩ

3 ACC IN — Connected to ACC. — —

45 kΩ

15 kΩ

4 VDD OUT 5.7 V/100 mA min Vcc Regular 5.7 V. 5.7 V 0V

Vcc

175 kΩ

50 kΩ

5 SW5V OUT 5.0 V/100 mA min VDD Output voltage is 5 V 0V 0V

Vcc when M or H level
applied to CTRL pin.
6 COMP OUT 5.0 V/100 mA min Output for ACC detector 0V 0V

50 kΩ

7 ANT CTRL — L: ANT output OFF — —

H: ANT output ON
51 kΩ

49 kΩ

8 VCC — Connected to VCC — —

Rev.2.00 Jan 16, 2007 page 2 of 16

HA13164AH

Pin Description and Equivalent Circuit (cont.)

Function
Pin Surge
No. Pin Name Specification Equivalent Circuit Normal Operation TSD Input
9 BATT DET — Low battery detect. Detect Not
VDD
detect
250 kΩ
10 kΩ

10 AUDIO OUT 9.0 V/500 mA min Vcc Output voltage is 9 V 0V 0V

Vcc when M or H level
applied to CTRL pin.

77.3 kΩ

12.3 kΩ

11 CTRL — L: BIAS OFF — —

M: BIAS ON
65 kΩ H: CD ON

35 kΩ

12 CD OUT 8.0 V/1.3 A min Vcc Output voltage is 8 V 0V 0V

Vcc when H level applied to
CTRL pin.

64.7 kΩ

12.4 kΩ

13 ILM AJ — Vcc Adjustment pin for ILM — —

Vcc output voltage.
14 ILM OUT 9.85 V/500 mA min Output voltage is 10 V 0V 0V
when M or H level
applied to CTRL pin
33.4 kΩ

5 kΩ

15 GND — Connected to GND — —

Rev.2.00 Jan 16, 2007 page 3 of 16

HA13164AH

Timing Chart

VCC 8.5 V 9.25 V

VDD
OUT

CTRL

ANT
CTRL

AUDIO
OUT

CD
OUT

ILM
OUT

EXT
OUT

SW5V
OUT

ANT
OUT

ACC 2.8 V 2.5 V

IN

COMP
OUT

B.DET current

Rev.2.00 Jan 16, 2007 page 4 of 16

HA13164AH

Block Diagram

+B
ACC
VCC ACC IN
8 3
+ BATT.DET
− 9
ANT OUT Surge protector
2

+
−
EXT OUT
1
BIAS TSD COMP OUT
6
+
ANT CTRL
7 − VDD OUT
CTRL 4
11

−
CD OUT +
12
SW5V OUT
5

− −
AUDIO OUT + + ILM OUT
10 14
+

15 TAB 13
ILM AJ
GND GND

Rev.2.00 Jan 16, 2007 page 5 of 16

HA13164AH

Absolute Maximum Ratings

(Ta = 25°C)
Item Symbol Rating Unit Note
Operating power supply voltage Vcc 18 V
DC supply voltage Vcc(DC) 26 V 1
Peak voltage Vcc(PEAK) 50 V 2
Power dissipation Pd 36 W 3
Junction temperature Tj 150 °C
Operating temperature Topr –40 to +85 °C
Storage temperature Tstg –55 to +125 °C
Notes: Recommended power supply voltage range 10 to 16 V.
1. Applied time is less than 30 s.
2. Surge pulse as input.
3. Ta = 25°C. : Permissible power dissipation when using a heat sink of infinite area. Refer to the derating
curves below.

20
Power dissipation Pd (W)

15
thin = 1.6 mm, 100 cm
Aluminum heat sink

11.0 W
thin = 1.6 mm, 50 cm
Aluminum heat sink
10

8.7 W

w/o heat sink

1.8 W
0
0 25 50 75 100 125 150 175
Ambient temperature Ta (°C)

Rev.2.00 Jan 16, 2007 page 6 of 16

HA13164AH

Electrical Characteristics
(unless otherwise noted, Vcc = 13.2 V, Ta = 25°C)
Item Symbol Min Typ Max Unit Test Condition
Standby current IST — 460 700 µA ACC = 0 V, CTRL = 0 V
CTRL L level (STBY mode) VCL 0 — 1.0 V
CTRL M level (CD OFF mode) VCM 2.0 — 3.0 V
CTRL H level (CD ON mode) VCH 4.0 — – V
ANT CTRL L level (ANT OFF mode) VACL 0 — 2.0 V
ANT CTRL H level (ANT ON mode) VACH 3.0 — – V
VDD Output voltage Vo1 5.4 5.7 6.0 V Io1 = 80 mA
OUT Voltage regulation ∆Vo11 — 10 50 mV Vcc = 10 to 16 V, Io1 = 80 mA
Load regulation ∆Vo12 — 50 100 mV Io1 = 0 to 80 mA
Minimum I/O voltage ∆Vo13 — 1.0 1.5 V Io1 = 80 mA
differential
Output current capacity Io1 100 250 — mA Vo1 ≥ 5.4 V
Ripple rejection ratio SVR1 50 60 — dB f = 100 Hz, Io1 = 80 mA
CD Output voltage Vo2 7.6 8.0 8.4 V Io2 = 1.0 A
OUT Voltage regulation ∆Vo21 — 40 100 mV Vcc = 10 to 16V, Io2 = 1.0 A
Load regulation ∆Vo22 — 70 150 mV Io2 = 10m to 1.0 A
Minimum I/O voltage ∆Vo23 — 1.0 1.5 V Io2 = 1.0 A
differential
Output current capacity Io2 1.3 2.0 — A Vo2 ≥ 7.6 V
Ripple rejection ratio SVR2 40 45 — dB f = 100 Hz, Io2 = 1.0 A
AUDIO Output voltage Vo3 8.5 9.0 9.5 V Io3 = 400 mA
OUT Voltage regulation ∆Vo31 — 30 90 mV Vcc = 10 to 16 V, Io3 = 400 mA
Load regulation ∆Vo32 — 100 200 mV Io3 = 10 to 400 mA
Minimum I/O voltage ∆Vo33 — 0.4 0.9 V Io3 = 400 mA
differential
Output current capacity Io3 500 850 — mA Vo3 ≥ 8.5 V
Ripple rejection ratio SVR3 45 50 — dB f = 100 Hz, Io3 = 400 mA
ILM Output voltage Vo4 9.35 9.85 10.35 V Io4 = 400 mA
OUT Voltage regulation ∆Vo41 — 40 100 mV Vcc = 12.5 to 16 V, Io4 = 400 mA
Load regulation ∆Vo42 — 50 100 mV Io4 = 10 to 400 mA
Minimum I/O voltage ∆Vo43 — 1.0 1.5 V Io4 = 400 mA
differential
Output current capacity Io4 500 900 — mA Vo4 ≥ 9.35 V
Ripple rejection ratio SVR4 35 40 — dB f = 100 Hz, Io4 = 400 mA
EXT Differential I/O voltage ∆Vo51 — 1.0 1.5 V Io5 = 300 mA
OUT Load regulation ∆Vo52 — 350 600 mV Io5 = 10 to 300 mA
Output current capacity Io5 300 500 — mA Vo5 ≥ 11.7 V
ANT Differential I/O voltage ∆Vo61 — 1.0 1.5 V Io6 = 300 mA
OUT Load regulation ∆Vo62 — 350 600 mV Io6 = 10 to 300 mA
Output current capacity Io6 300 500 — mA Vo6 ≥ 11.7 V
SW5V Output voltage Vo7 4.6 5.0 5.4 V Io7 = 80 mA, VDD = no load
OUT Output current capacity Io7 100 300 — mA Vo7 ≥ 4.6 V
ACC Output voltage Vo8 4.6 5.0 5.4 V Io8 = 40 mA, VDD = no load
OUT Output current capacity Io8 100 300 — mA Vo8 ≥ 4.6 V
Rise threshold voltage VTHH8 2.6 2.8 3.0 V
Hysteresis range ∆VTH8 0.2 0.3 0.4 V
BATT. Threshold voltage VTHH9 8.1 8.5 8.9 V
DET Hysteresis range ∆VTH9 0.55 0.75 0.95 V
Output current capacity Io9 200 — — µA Vo = 0.3 V

Rev.2.00 Jan 16, 2007 page 7 of 16

HA13164AH

Evaluation Circuit

HA13164AH

EXT ANT ACC VDD SW5V COMP ANT BATT AUDIO CD ILM ILM
OUT OUT IN OUT OUT OUT CTRL VCC DET OUT CTRL OUT AJ OUT GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

C1 C2 C3 C8 C9 C10
+
0.1 0.1 0.1 10 0.1 0.1
µF µF µF µF µF µF

EXT ANT VDD SW5V COMP BATT.DET AUDIO CD ILM

SW1
SW4
SW2 SW3
R2
C6 C7 3.3 kΩ
+
100 0.1 R3
µF µF 3.3 kΩ

ACC ANT CTRL VCC CTRL 5V

Rev.2.00 Jan 16, 2007 page 8 of 16

HA13164AH

Main Characteristic

CTRL, ANTCTRL Vth vs. Tc

6
Vcc = 13.2 V

CTRL 'L/M' Vth (1.0 V ≤ Vth ≤ 2.0 V)

5 ANTCTRL Vth (2.0 V ≤ Vth ≤ 3.0 V)
CTRL, ANTCTRL voltage (V) CTRL 'M/H' Vth (3.0 V ≤ Vth ≤ 4.0 V)

0
−50 0 50 100 150
Tc (°C)

B.DET Detection vs. Tc

11

∆Vth (0.55 V ≤ ∆Vth ≤ 0.95 V)

10.5 Vth (8.1 V ≤ Vth ≤ 8.9 V)

10
VCC voltage (V)

9.5

8.5

7.5

7
−50 0 50 100 150
Tc (°C)

Rev.2.00 Jan 16, 2007 page 9 of 16

HA13164AH

ACC Detection vs. Tc

5
Vcc = 13.2 V

Vth (2.6 V ≤ Vth ≤ 3.0 V)

∆Vth (0.2 V ≤ ∆Vth ≤ 0.4 V)
4

ACC voltage (V)

3

0
−50 0 50 100 150
Tc (°C)

Rev.2.00 Jan 16, 2007 page 10 of 16

HA13164AH

Vo – Io Characteristics VDD Output

7
Vcc = 13.2 V

5
VDD output voltage (V)

1 Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 50 100 150 200 250 300
Io (mA)

Vo – Io Characteristics CD Output
10
Vcc = 13.2 V

8
CD output voltage (V)

2
Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 0.5 1 1.5 2 2.5 3
Io (A)

Rev.2.00 Jan 16, 2007 page 11 of 16

HA13164AH

Vo – Io Characteristics AUDIO output

10
Vcc = 13.2 V

AUDIO output voltage (V)

6

2
Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 200 400 600 800 1000 1200
Io (mA)

Vo – Io Characteristics ILM output

12
Vcc = 13.2 V

10
ILM output voltage (V)

2
Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 500 1000 1500
Io (mA)

Rev.2.00 Jan 16, 2007 page 12 of 16

HA13164AH

Vo – Io Characteristics EXT, ANT Output

Vcc = 13.2 V
12

10

EXT output voltage (V)

8

2
Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 200 400 600 800 1000
Io (mA)

Vo – Io Characteristics COMP, SW5V Output

7
Vcc = 13.2 V

6
COMP, SW5V output voltage (V)

COMP SW5V
4

1 Tc = 100°C
Tc = 25°C
Tc = −30°C
0
0 50 100 150 200 250 300 350
Io (mA)

Rev.2.00 Jan 16, 2007 page 13 of 16

HA13164AH

SVR vs. Tc VDD Output

70
Vcc = 13.2 V
Ripple f = 100 Hz, v = 0 dBm
60

50

40
SVR (dB)

30

20

10 Io = 10 mA
Io = 40 mA
Io = 80 mA
0
−50 0 50 100 150
Tc (°C)

SVR vs. Tc CD Output

70
Vcc = 13.2 V
Ripple f = 100 Hz, v = 0 dBm
60

50

40
SVR (dB)

30

20

10 Io = 10 mA
Io = 500 mA
Io = 1 A
0
−50 0 50 100 150
Tc (°C)

Rev.2.00 Jan 16, 2007 page 14 of 16

HA13164AH

SVR vs. Tc AUDIO Output

70
Vcc = 13.2 V
Ripple f = 100 Hz, v = 0 dBm
60

50

40
SVR (dB)

30

20

10 Io = 10 mA
Io = 200 mA
Io = 400 mA
0
−50 0 50 100 150
Tc (°C)

SVR vs. Tc ILM Output

70
Vcc = 13.2 V
Ripple f = 100 Hz, v = 0 dBm
60

50

40
SVR (dB)

30

20

10 Io = 10 mA
Io = 200 mA
Io = 400 mA
0
−50 0 50 100 150
Tc (°C)

Rev.2.00 Jan 16, 2007 page 15 of 16

HA13164AH

Package Dimensions
JEITA Package Code RENESAS Code Previous Code MASS[Typ.]
P-HSIP15-14.3x19.66-1.27 PRSS0015DA-C SP-15TGV 3.0g Unit : mm

20.5 MAX
19.66
19.0 ±0.3 3.3MiN 3.5 TYP 3.8MAX
φ 3.6 ±0.2 2-C3.0 ±0.2 1.1MiN 1.28 TYP 1.50MAX
±0.2
3.0
11.3 ±0.3

13.8
7.8

17.9
*1 +0.10
1.11±0.25 0.6 ±0.1 1.27 ±0.25 0.25 -0.05

*1
2.54 ±0.25 1.8 ±0.25
*1
3.5 ±0.5

6.04 ±0.5 *1

Note) 1. Dimension "*1" is the value after bending.

( Ni/Pd/Au plating )

Rev.2.00 Jan 16, 2007 page 16 of 16

 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.

RENESAS SALES OFFICES http://www.renesas.com

Refer to "http://www.renesas.com/en/network" for the latest and detailed information.

Renesas Technology America, Inc.

450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510

© 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.

Colophon .7.0