Rittal EMC Enclosures

EMC Enclosures
Rittal EMC Concept

For optimum electromagnetic compatibility

Electrical, magnetic and electromagnetic fields are all around us, including Rittal offers excellent pre-requisites for EMC enclosure configurations in
in the vicinity of enclosures and equipment cases. the form of its standard sheet steel enclosures, EMC shielded enclosures
and a practical range of EMC accessories. Even the standard enclosures
Electromagnetic Interference (EMI) has now become a major consideration for
offer good shielding against electrical fields, which is generally sufficient
any project involving design, construction, manufacture and installation of
for many applications.
electrical and electronic equipment and systems. Electrical equipment
must be designed not only to meet a functional technical performance, Depending on the individual application, anything is possible, be it
but due consideration must also be given to the interaction, the closely intermeshed potential equalization in a standard enclosure to
equipment has with the electromagnetic environment in its intended prevent conducted interference or extra shielding to protect against
operating location. high-frequency electromagnetic fields.
This EMI environment can become an interference factor for normal The large enclosures in the TS 8 series offer a good level of shielding
operations of the system. At times, the devices themselves can create even in the standard version. For Rittal EMC enclosures with a high level
Electro-Magnetic fields during their operation, which can then result in of shielding, excellent attenuation levels and attractive value-for-money
unintended behavior of the devices and sometimes destructive over a products are achieved on the basis of zinc plated metal surfaces in
period of time. The interference fields can also affect the surrounding conjunction with low-resistance EMC shields.
environment. This applies for both industrial applications and home
According to EMC legislation, CE labeling is only compulsory for active
environments.
equipment and systems. Empty enclosures are not subject to the EMC
Regular EM Fields directive because there are passive components which cannot be
Interference fields can affect the device from the environment and can furnished with a declaration of conformity with regard to EMC standards.
also be generated during operation of the device itself and affect the
For increased EMC requirement, Rittal offers the TS 8 enclosure in a
environment. For example, heavy duty conveyor application, turbines,
version with high RF attenuation.
printing press etc.
Note: Shielding effectiveness measurement as per IEC 61000-5-7,
Intensive EM Fields
2001 (10 KHz- 3 Ghz)
Particularly intensive electromagnetic interference fields can arise, for
example, with microwave drying, spark erosion systems, high-frequency
welding systems, underground metro, nuclear power plants etc.

Material: • Gland plates : Zinc-plated

• Enclosure frame : Sheet Steel with Aluminium Zinc coating, 1.5 mm • Mounting plate : Zinc-plated
• Roof : GI of 1.5 mm • Colour : RAL 7035
• Door : GI of 2 mm
Supply includes:
• Rear panel : GI of 1.5 mm
• Enclosure frame with door
• Gland plates : GI of 1.5 mm
• Rear panel and roof plate detachable
• Mounting plate : GI of 3 mm
• Gland plates, divided
Surface finish: • Door hinged on the right, may be swapped to the left for single door
• Enclosure frame : Uncoated • Mounting plate
• Door, rear panel and roof : Spray-finished on the outside and paint • 4 eye bolts
free on the inside
Note: For bayed enclosures, the EMC baying seal is required

EMC Enclosure Pack of

Width mm 800 800 1200 1200 1200
Height mm 2000 2000 2000 2000 2200
Depth mm 600 800 600 800 600
Model No. for 1 No. 9790845 9790846 9790847 9790848 9790849
Accessories
EMC side panel 2 No's 9790851 9790852 9790851 9790852 9790850
EMC baying seal 1 No. 8800690 8800690 8800690 8800690 8800690
EMC divider panel seal 1 No. 4348000 4348000 4348000 4348000 4348000
Base/plinth
Front & Rear components 1 set 8601800 8601800 8601200 8601200 8601200
Trim panels side 1 set 8601060 8601080 8601060 8601080 8601060
Rail for EMC shielding bracket
1 No. 2388800 2388800 2388120 2388120 2388120
and strain relief
EMC gland plates 1 set 8800680 8800680 8800620 8800620 8800620

02 Rittal EMC Enclosures

 EMC Enclosures
Accessories

EMC side panels Colour:

– RAL 7035
for TS
Automatic potential equalisation via assembly Supply includes:
components, and a high level of EMC – Assembly parts
protection thanks to a special EMC seal.
Material:
– GI, 1.5 mm For enclosures
Packs of Model No.
Height mm Depth mm
Surface finish:
2000 600 2 pc(s). 9790851
– powder-coated on the outside and paint-free
on the inside 2000 800 2 pc(s). 9790852
2200 600 2 pc(s). 9790850

Cross section
EMC baying seal mm
Model No. TS
for TS 6.3 x 6.3 8800.690
For baying enclosure systems. Seal with all-
round, electrically conductive sheathing.
Supply includes:
3 seals, length 2 mm each.

Packs of Model No. SZ

EMC divider panel seal
1pc(s). 4348.000
This seal ensures optimum contact in bayed
EMC enclosure systems and when using
a Zinc - plated divider panel.
Material:
– PU foam with electrically conductive sheathing
Supply includes:
– 1 roll (12.7 x 12.7 x 5300 mm)

Rail
for EMC shielding bracket and strain relief Also required:
Combined rail for strain relief and EMC − EMC shielding bracket
contacting of inserted cables. − Cable clamps for strain relief
Mounting options:
• On the horizontal / vertical TS, PC, ES
Width mm Packs of Model No. SZ
enclosure section
• On a mounting plate 600 1 2388.600
800 1 2388.800
May also be fitted without a retaining bracket. 1000 1 2388.000
Additional contacting on the left or right of the 1200 1 2388.120
rail via existing holes (9 mm diameter).
Material:
Sheet Steel
Surface finish:
Zinc-plated
Supply includes:
– 1 rail
– 2 retaining brackets
– Assembly parts

Rittal EMC Enclosures 03

 EMC Enclosures
Accessories

For shield diameter

EMC shielding bracket mm
Packs of Model No. SZ
Quick assembly without the use of tools: 3 – 10 10 pc(s) 2388.100
Press the EMC shielding bracket against the
4 – 15 10 pc(s) 2388.150
cable shield and clip into the rail. Diameter
10 – 20 10 pc(s) 2388.200
changes are compensated in full by the spring
15 – 28 10 pc(s) 2388.280
of the EMC shielding bracket.
Material:
– Sheet Steel
Surface finish:
– Zinc-plated

EMC gland plates Supply includes:

– 1 gland plate with T-head punching
For shielded cables with a maximum diameter of
– 1 sliding gland plate
20 mm.
– 2 IP/EMC gaskets
Combined EMC / IP seal provides low-resistance
contact between cable shield and gland plate.
For all 400, 500, 600 and 800 mm deep enclosures Width mm Packs of Model No.
in conjunction with standard gland plates. 600 1 set(s) 8800.660
800 1 set(s) 8800.680
Material:
1000 1 set(s) 8800.6001)
– Sheet Steel
1200 1 set(s) 8800.6201)
Surface finish: 1) For one enclosure half only
– Zinc-plated

Cable glands, metric

EMC cable glands 1)
Cable Minimum
The cable sheathing may optionally be Packs Model No.
Size diameter shield
interrupted at the contact point or removed mm diameter mm of SZ
completely inside the enclosure. 4.5 – 10 3 5 2843.160
M16
The cable shield in the enclosure is retained. M20 6 – 12 5 5 2843.200
The supplied lock nut cuts automatically into M25 11 – 17 8 5 2843.250
the paint when screwed down, thus creating a M32 15 – 21 10 1 2843.320
conductive connection. M40 19 – 28 15 1 2843.400
Protection category: M50 27 – 38 19 1 2843.500
– IP 68 to IEC 60 529 M63 34 – 44 30 1 2843.630
1) Minimum
– IP 69K to DIN 40 050-9 shield diameter =
cable diameter minus cable sheathing

Cable glands, PG
Cable Minimum1)
PG Packs Model No.
diameter shield
size of SZ
mm diameter mm
9 4-8 3 5 2411.090
11 5 - 10 4 5 2411.110
13.5 6 - 12 5 5 2411.140
16 10 - 14 8 5 2411.160
21 13 - 18 10 1 2411.210
29 18 - 25 15 1 2411.290
1) Minimum shield diameter =
cable diameter minus cable sheathing

04 Rittal EMC Enclosures

 EMC Enclosures
Accessories

Size
EMC earth clamps mm
Packs of Model No.
The clamps may be used directly on the device 4 50 pc(s). 2367.040
or operating equipment on the mounting plate
6 50 pc(s). 2367.060
for cable shield contact.
8 50 pc(s). 2367.080
Material: 12 50 pc(s). 2367.120
– Sheet Steel 16 50 pc(s). 2367.160
Surface finish: 20 25 pc(s). 2367.2001)
1) 2 assembly brackets
– Zinc-plated

Cross
Earthing braid For section
Length
Packs of Model No.
mm
Tin-plated copper, in various lengths and cross- mm2
sections with press-fitted contact rings. Earthing M6 10 200 10 pc(s). 2412.210
braids counteract the current displacement M8 16 200 10 pc(s). 2412.216
effect at high frequencies, whilst at the same M8 25 200 10 pc(s). 2412.225
time offering highly flexible connection M6 10 300 10 pc(s). 2412.310
opportunities M8 16 300 10 pc(s). 2412.316
M8 25 300 10 pc(s). 2412.325

LED system light Material:

– Light body: Extruded aluminium
in 24 V (DC) version
– Light cover: Polycarbonate (halogen-free)
• Max. EMC compatibility
– Light ends: PC-ABS
• Protected, thanks to use within the safety
extralow voltage range Colour:
• Economical energy use – Similar to RAL 7035
• Low-maintenance thanks to the use of LEDs Protection category IP to IEC 60 529:
• May be connected to a door-operated switch – IP 20
• Integral through-wiring
Supply includes:
• Universal attachment options – LED system light with clip and screw
• Vertically hinged light cone mounting kits, assembly parts

Model No. 4140.810 4140.820 4140.830 4140.840

Rated voltage 24 V (DC) (±10 %)
No. of LEDs 10 20 30 40
Protection category III (SELV)
Width (B1) mm 230 330 430 530
Mounting distance CLIP (B2) mm 175 275 375 475
Mounting distance, screw attachment (B3) mm 250 350 450 550
Rated current A1) 0.04 0.08 0.12 0.16
Circuit-breakers Integral on/off/door-operated switch mode
1) Maximum baying up to a total rated current strength of 2 amps

Also required: Note:

– Only intended for use in enclosures and sealed
– LED connection cable
cases!
– Door operated switch with LED connection – When using on customer-supplied power packs,
cable, Refer Rittal Handbook 33 / 34 or it is important to obtain the requisite approvals
www.rittal-india.com for article number depending on the application
and more details

Rittal EMC Enclosures 05

TopTherm fan-and-filter units

T2
Colour: Note: Approvals: T1
– RAL 7035 – For energy-efficient operation Available on the Internet
Supply includes: of the fan-and-filter units, we Performance diagrams:
– Complete unit ready to install, recommend using the Available on the Internet
including filter mat enclosure internal thermostat,
Technical details:
the speed control or the digital
Available on the Internet
enclosure internal temperature

H
display and thermostat B

Air throughput 20 – 180 m³/h, EMC

Packs
Model No. 3237.600 3238.600 3239.600 3240.600
of
Rated operating voltage V, ~, Hz 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60
Air throughput, unimpeded air flow
20 / 25 55 / 66 105 / 120 180 / 160
m³/h
Rated current A 0.065 / 0.052 0.12 / 0.11 0.12 / 0.11 0.21 / 0.19
Pre-fuse A 2 2 2 2
Power consumption W 11 / 9 19 / 18 19 / 18 35 / 34
Width (B) mm 116.5 148.5 204 255
Height (H) mm 116.5 148.5 204 255
Depth (T1) mm 16 16 24 25
Max. installation depth (T2) mm 43 58.5 90 107
Required mounting cut-out (BxH) mm 92 x 92 124 x 124 177 x 177 224 x 224
Axial, self-starting shaded Diagonal, self-starting Diagonal, self-starting Diagonal, self-starting
Fan
pole motor shaded pole motor shaded pole motor shaded pole motor
Operating temperature range -15°C...+55°C -15°C...+55°C -15°C...+55°C -30°C...+55°C
Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C
Noise level dB(A) 38 / 43 46 / 49 46 / 49 51 / 46
Accessories
Outlet filter 1 pc(s). 3237.060 3238.060 3239.060 3240.060
Spare filter mats 5 pc(s). 3237.066 3238.066 3239.066 3240.066
Fine filter mats 5 pc(s). – 3238.055 3181.100 3182.100
Hose-proof hood 1 pc(s). 3237.080 3238.080 3239.080 3240.080
Blanking cover 2 pc(s). 3237.020 3238.020 3239.020 3240.020
EC speed control – – – –
Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000
Digital enclosure internal temperature
1 pc(s). 3114.200 3114.200 3114.200 3114.020
display and thermostat
Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000
Speed control 1 pc(s). 3120.200 3120.200 3120.200 3120.200

06 Rittal EMC Enclosures

 TopTherm fan-and-filter units
Air throughput 230 – 900 m³/h, EMC
Packs
Model No. 3241.600 3243.600 3244.600 3245.600
of
Rated operating voltage V, ~, Hz 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 200 - 240, 1~, 50/60
Air throughput, unimpeded air flow
230 / 250 550 / 600 700 / 770 900
m³/h
Rated current A 0.26 / 0.24 0.37 / 0.39 0.43 / 0.6 1.33 / 1.33
Pre-fuse A 4 4 4 4
Power consumption W 40 / 42 70 / 87 95 / 135 165 / 165
Width (B) mm 255 323 323 323
Height (H) mm 255 323 323 323
Depth (T1) mm 25 25 25 25
Max. installation depth (T2) mm 107 118.5 130.5 130.5
Required mounting cut-out (BxH) mm 224 x 224 292 x 292 292 x 292 292 x 292
Diagonal, self-starting Diagonal, 1~ capacitor Diagonal, 1~ capacitor
Fan Diagonal, EC motor
shaded pole motor motor motor
Operating temperature range -30°C...+55°C -30°C...+55°C -30°C...+55°C -25°C...+55°C
Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C +-25°C...+70°C
Noise level dB(A) 54 / 56 59 / 61 65 / 66 72
Accessories
Outlet filter 1 pc(s). 3240.060 3243.060 3243.060 3243.060
Spare filter mats 5 pc(s). 3240.066 3243.066 3243.066 3243.066
Fine filter mats 5 pc(s). 3182.100 3183.100 3183.100 3183.100
Hose-proof hood 1 pc(s). 3240.080 3243.080 3243.080 3245.080
Blanking cover 2 pc(s). 3240.020 3243.020 3243.020 3245.020
EC speed control – – – – from page
Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000
Digital enclosure internal temperature
1 pc(s). 3114.200 3114.200 3114.200 3114.200
display and thermostat
Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.00
Speed control 1 pc(s). 3120.200 3120.200 3120.200 –

Rittal EMC Enclosures 07

 Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services

RITTAL India Pvt Ltd.

No. 23 & 24 • KIADB Industrial Area • Veerapura
Doddaballapur - 561 203 • Bengaluru District
Tel: +91(0)80 3372 0700 • Fax: +91(0)80 3372 0866
Email: [email protected] • Website: www.rittal-india.com