Bill of Quantities & Price Schedule

Civil & Structure Works of Project _______________________ at

Summary Sheet (Tower 1B+GF+14)

Sub
Description of Items Amount
Head

1 EARTHWORK 3,589,558

2 CEMENT CONCRETE WORK 47,522,510

3 MASONRY WORKS 13,292,810

4 WATER PROOFING WORKS 4,855,367

5 FLOORING WORKS 4,066,573

6 PLASTERING WORKS 10,055,610

7 FINISHING WORKS 3,074,800

8 MISCELLANEOUS WORKS 766,398

9 DISMANTLING WORK -

a Total Amount in Rs. 87,223,626

b Discount NIL

c vat included

d Service Tax included

e Net Total 87,223,626

Note: The Reinforcement Steel, Cement, Coupler and Wooden door frames shall be supplied by
the Client Free of Cost.
 Bill Of Quantities Price Schedule

BILL OF QUANTITIES & PRICE SCHEDULE

CIVIL AND STRUCTURAL WORKS FOR CONSTRUCTION OF "________________"
SECTOR-____, __________ GURGAON ( HARYANA )
(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
Note: The Reinforcement Steel and Cement shall be supplied by the Client
Free of Cost.
1 SITE DEVLOPMENT AND EARTH WORK
1.1 Excavation over areas from natural ground level
Earth work in excavation by mechanical / manually means over areas from
existing natural ground level and stacking the excavated material within the site
or adjacent plots (within 500 m radius) including dressing of bottom, sides strutting,
timbering, shoring, trimming of sides dewatering, all leads and lifts, incidentals, etc.
complete with ramming of bottom, surface preparation as per specifications to
receive the PCC. Excavation shall be payable only for vertical cut up to the outer
edge of foundation lean concrete as indicated in drawings for all depths. Cost of
extra excavation required for working space, supporting side shuttering of
foundations and retaining walls and that required for making slopes for stability of
excavation shall be deemed to be included in the rate quoted. (Note: The Line &
levels in the drawings shall be strictly followed and the rate shall be inclusive for all
depths.)

1.1.1 All kinds of soils for all leads and lifts cum. 18108 75 1,358,100

1.2 Excavation below excavated levels of pit already excavated 0 -

Earth work in excavation in foundation trenches or under grade/ raft slab etc. from
existing excavated level and stacking the excavated material within the site or
adjacent plots including dressing of bottom, sides strutting, timbering, shoring,
trimming of sides, dewatering, all leads and lifts, incidentals, etc. complete with 0 -
ramming of bottom, surface preparation as per specifications to receive the PCC.

Excavation shall be payable only for vertical cut up to the outer edge of foundation
lean concrete as indicated in drawings through out the pit depths. Cost of extra
excavation required for working space, supporting side shuttering of foundations
and retaining walls and that required for making slopes for stability of excavation
shall be deemed to be included in the rate quoted. (Note: The Line & levels in the
drawings shall be strictly followed and excess excavation if any shall be made good 0 -
by contractor free of cost as per the instructions of the Owner) To organize the
space for stacking of excavated earth for using the same in back filling will be
responsidility of the contractor only.

1.2.1 All kinds of soils for all leads and lifts cum. 2200 135 296,993

1.3 Excavation in over areas or foundation trenches from existing natural ground
0 -
level
1.3.1 Earth work in excavation in foundation trenches, Columns pits etc. upto a
depth/width of 3 mtr. from existing natural ground level and stacking the
excavated material within the site or adjacent plots including dressing of bottom,
sides strutting, timbering, shoring, trimming of sides dewatering, all leads and lifts, 0 -
incidentals, etc. complete with ramming of bottom, surface preparation as per
specifications to receive the PCC.

Excavation shall be payable only for vertical cut up to the outer edge of foundation
lean concrete as indicated in drawings for all depths. Cost of extra excavation
required for working space, supporting side shuttering of foundations and retaining
walls and that required for making slopes for stability of excavation shall be
deemed to be included in the rate quoted. (Note: The Line & levels in the drawings
shall be strictly followed and over excavation if any shall be made good by 0 -
contractor free of cost as per the instructions of the Owner) To organize the space
for stacking of excavated earth for using the same in back filling will be
responsidility of the contractor only.

a. All kinds of soils for all leads and lifts cum. 0 90 -

1.4 Earth Filling 0 -

1.4.1 Filling with selected, suitable excavated earth already available at site or
adjacent plots in plinths, back of retaining walls, foundations and trenches and
spreading the remaining soil for specified location as directed by the Owner and
shall be done in layers, not exceeding 20cm in depth and consolidating each
deposited layer by mechanical means, ramming and watering as per specifications
including re-excavation, transportation, loading, unloading, carriage to dumping
spot and all incidentals at all depth, levels, leads and lifts complete. (Net cum. 9341 125 1,167,625
consolidated area fill volume will be computed from the initial and final levels.
Volume in slopes, embankments etc. will be computed applying appropriate
formula, as per CPWD specification). Note: filling shall be done by the excavated
earth available at site or adjacent plots stacked by the Contractor and/ or by the
other agency.

1.4.2 Supply selected/ approved earth brought from outside the site and filling the
same in plinths, back of retaining walls, foundations and trenches and spreading in
landscaping and other location as directed by the Project Manager and shall be
done in layers, not exceeding 20cm in depth and consolidating each deposited
layer by mechanical means, ramming and watering as per specifications including
transportation, cost of soil, royalty, loading, unloading, carriage to dumping spot
and all incidentals at all depths and levels, for all leads and lifts complete (Net cum. 0 250 -
consolidated area fill volume will be computed from the initial and final levels.
Volume in slopes, embankments etc. will be computed applying appropriate
formula, as per CPWD specification).

1.5 Sand Filling 0 -

Supplying and Filling in plinth, under floor with fine Jamuna sand including
ramming, watering, consolidating and dressing complete as per specification and cum. 694 1,060 735,640
as directed by the Project Manager.
1.6 Trasportation of earth 0 -
Disposal of surplus excavated or earlier stacked earth from the site or adjacent
plots to authorised dumping ground including re-handling, transporting, royalties,
loading at all levels, depths and height all complete as directed by the Project cum. 0 65 -
Manager / Owner / Architect. (Excavated earth shall be property of the Contractor)

1.7 Antitermite treatment 0 -

Note: The work must be executed by approved specialised Agency who is the
member of IPCA. The Contractor shall give a 10 years guarantee as per instruction 0 -
of Project Manager.
1.7.1 Providing and injecting chemical emulsion for pre-constructional anti-termite
treatment and creating a chemical barrier under and all-round the column pits, wall
trenches, top surface of plinth filling, junction of wall and floor along the external 0 -
perimeter of building, expansion joints, surroundings of pipes and conduits etc.
complete With Imidachloropid E.C. 20% with 1% concentration.
a. For horizontal area (plinth area at ground floor level will be measured and paid for )
sqm. 0 70 -
b. 300mm wide chemical barrier along external periphery of retaining wall of
rmt 0 140 -
basement

1.8 Dewatering 0 -
Dewatering of basement excavation with Pump ( the quoted rate shall including Per
providing detail design and getting it approved from the Architect / PMC,all piping, hour/per
equipments, running cost like disel, operators etc. all required for total operation.) 0 18 -
Horse
Power

Project:________________ 2 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.

1.9 Soling 0 -
a. Providing, laying, ramming and compacting dry rubble stone hardcore /soling in
required consolidated thickness in sub base to required levels and lines with first
quality rubble of 90-45mm in stone aggregate including stone screening 13.2mm
size and finishing /blinding the surfaces with murrum including watering, Cum 13 2,400 31,200
consolidated in layers of 30 cm with vibratory compactor etc. complete as per
specifications, drawings and as directed by the Project Manager.

Total : 1 : 3,589,558

2 CONCRETE WORK (PLAIN AND RCC) 0 -

(Rates for all cement concrete items plain and reinforced described below shall
include work from lowest Basement to top of last roof including roof of machine
room, mumty, overhead tanks and parapets above. This section covers cast in situ
structural and architectural as well as precast structural and architectural concrete.) 0 -
Note :- Contractor shall use Marble Powder and Mechanical grinder in
repairing joints and honeycombs if required.

2.1 Plain cement concrete 0 -

2.1.1 Providing and laying plain cement concrete of specified grade as bed concrete
under foundation, bases for rafts, underground water tank, building machine
equipments, column footing, under floor landings, below road and pathways,cill,
coping, screeding at roof to required slope and other locations as called for laid, 0 -
consolidated and cured etc. complete including finishing the top surface to receive
the next course / layer as per specification and drawing including the cost of
centering and shuttering.

a. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm and down

cum R/O 3,200 -
gauge)
b. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm and down
cum R/O 3,100 -
gauge) screed to terrace
c. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm and down
cum R/O 3,200 -
gauge)
d. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm and down
cum R/O 2,950 -
gauge)
2.1.2 Alternate item to 2.1.1 0 -
Item same as 2.1.1 above but for using design mix concrete or RMC instead of
0 -
nominal mix (The rate shall be inclusive cement cost)
a. Grade M15 cum 0 5,600 -
b. Grade M10 cum 0 5,200 -
c. Grade M7.5 cum 0 4,800 -
d. Grade M5 cum 0 4,600 -
2.2 Damp proof course 0 -
Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone aggreate 20mm nominal size) including
providing and mixing of water proofing compound @ 2% of cement content and
sqm. 0 450 -
providing and applying two layers of bitumen of grade 85/25 and as directed by the
Project Manager.

2.3 Cast - in -situ concrete 0 -

Providing & laying cast - in - place structural controlled design mix cement
concrete of M25 grade using pump with 20mm down gauge coarse aggregates
excluding cost of centering, shuttering and steel reinforcement but including cost of
making shear keys and provision of construction / control joints in various locations,
laid, consolidated and cured, item to include all structural items like base raft, ramp,
column, column capitals, wall, footings, equipment foundations, fins, mullions,
beams, lintels, pergola, chajja, facia, parapet, railing, slab, trenches, drains and 0 -
sumps etc. of any shape and sizes. The rates of concrete to include the cost of Fly
ash /admixtures / plasticisers/superplasticers/ bonding agent to achieve specified
strength and to facilitate pumpable concrete etc complete for all height and level.

2.3.1 Foundation, raft slab, raft beams, plinth beam, lift pits, sump pits, pedestals / bases
cum 1335 3,800 5,073,000
of coloum, wall foundations grade slab etc.
2.3.2 Suspended floors, roofs, balconies, shelves/ counters, stair waist slabs, folded
plate stairs and landings, lintel and floor beams, girders (deep beams), RCC bands,
cantilever projections, slab of tank, arches, other non-structural elements etc. cum 3127 3,800 11,882,600

2.3.3 Columns, pillars, piers, abutments, posts and struts,wall, offset and projection of
cum 913 4,000 3,652,000
columns, etc.
2.3.4 Retaining Walls, water tank wall, shear wall, lift wall (any thickness) cum 694 4,000 2,776,000
2.3.5 Parapets, planters, facias, fins, vertical projection of balconies, pergolas, copings,
cum 47 3,900 183,300
cills etc. (for all heights as shown in the drawing)
2.3.6 Cornics, moulding, bands, corbeling strips etc. cum 7 3,950 27,650
Extra for add or deduct for using Richer or leaner mix in place of M-25
0 -
2.4 Concrete.
2.4.1 M-20 instead of M-25 cum 0 40 -
2.4.2 M-30 instead of M-25 cum 157 80 12,560
2.4.3 M-35 instead of M-25 cum 180 120 21,600
2.4.4 M-40 instead of M-25 cum 300 160 48,000
2.4.5 M-45 instead of M-25 cum 20 200 4,000
2.4.6 M-50 instead of M-25 cum 0 240 -
2.5 Extra over item 2.3 for using RMC (Brought from outside the site) instead of
0 -
M-25 . The rate shall be inclusive cost of cement.
2.5.1 M20 grade concrete cum 0 2,000 -
2.5.2 M25 grade concrete cum 0 2,250 -
2.5.3 M30 grade concrete cum 0 2,500 -
2.5.4 M35 grade concrete cum 0 2,750 -
2.5.5 M40 grade concrete cum 0 3,000 -
2.5.6 M50 grade concrete cum 0 3,250 -
2.6 Centring and shuttering 0 -
2.6.1 Approved Marine plywood shuttering and centring for structural concrete work in
locations called for including strutting, propping, bracing, bolting, wedging, casing,
striking, removal etc. complete for any size, section, thickness. Props shall consist
of well designed steel pipes adequately braced (wooden ballies as props shall not 0 -
be permitted). The item to include centering and shuttering at all heights and levels.

Allow for forming grooves, drip course, chamfers, cut-outs, openings etc. where
called for and for dressing with approved shuttering oil to prevent adhesion.
Unexposed concrete surfaces subsequently left untreated (in the condition
obtained on removal of form work) shall not constitute exposed concrete work and
shall be measured under this item only. Irregular shapes with sides which may not
0 -
be perpendicular to each other for shapes not conforming to rectangle or square
shall not be paid separately. including cost of shuttering and staging material
(quoted rate to include all staging upto any height).

a. Foundation, raft slabs, raft beams, plinth beam, pedestrals/ bases of columns
sqm 636 400 254,400
grade slab etc.
b. Retaining Walls, water tank wall, shear wall and lift wall (any thickness) sqm 5228 415 2,169,620
c. Suspended floors, roofs, landings, balconies, stairs and landings, slabs of water
tank, ramp slabs, lintels, beams, floor beams, girders, cantilever beams, deep sqm 24404 450 10,981,800
beams, ramp beams, arches etc..
d. Columns, pillars, piers, abutments, posts and struts, offset and projection of
sqm 8872 415 3,681,880
columns, etc.
e. Shelves in kitchen/ pantries and toilets etc sqm 0 400 -

Project:________________ 3 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
f. Parapets, Planters, vertical fins, balcony facias, projections, pergolas as per the
sqm 108 450 48,600
shape and profiles indicated in the drawings.
g. Extra over item no. a to f above for circular, semi circular vertical surfaces for all
sizes upto a mean radius not exceeding 1 meters. (shuttering for curved surfaces
with radius greater than 1 meter shall be treated as flat shuttering and paid under sqm 0 200 -
respective items).
h. Cornices, moulding , bands , corbelling, strips etc. sqm 0 450 -
i. Folded plate staircase steps sqm 0 550 -
2.7 Reinforcement steel 0 -
Providing and Laying and fixing in position steel reinforcement ( Fe 500 ) in all
reinforced concrete work, including straightening, cutting, removal of loose rust by
wire brush and coating with cement slurry, bending, hoisting, laying in position to
the shape and profile required at all levels and heights as per drawing and design
and/ or as directed, The rate shall include cost of binding wire and fixing of couplar
and chairs, spacers which will not be measured separately for payment. 0 -
Quantity of steel as per drawing and with authorised overlaps only shall be
measured and paid for. ( Only Reinforcement steel and couplar will be supplied
free of cost by Client)

2.7.1 Thermomechanically Treated Reinforcement (TMT and / or High yield strength

MT 826 8,000 6,608,000
Deformed (Tor steel) bars of Fe-500 grade.
2.8 Making holes 0 -
Making holes of required size and shape in post RCC work at designated locations
if not mentioned in the drawings but required by Project Manager including cutting
of reinforcement and finishing edges smooth with 1:3 (1 cement : 3 coarse sand)
cement mortar and plugging the open spaces around sleeves/ puddle flanges with
concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm 0 -
nominal size) mixed with waterproofing compound etc.of approved manufacture all
complete. (Note: Cutting in RCC to be done by the mechanically cutter only.)

2.8.1 Upto 0.5 sqm area sqm 0 3,333 -

2.8.2 Above 0.5 sqm to 1 sqm area sqm 0 3,354 -
2.8.3 Above 1 sqm area sqm 0 3,122 -
2.9 Precast concrete 0 -
a. Providing, hoisting and fixing precast reinforced cement concrete work with M-20
grade concrete of any shape & thickness in trench covers, cills, copings, vertical
supports of kitchen counters, expansion joint cover etc. where ever required
including the cost of required centring, shuttering, making chamferd edges, cum. 15 6,500 97,500
grooves, drip course complete wherever shown but excluding cost of
reinforcement, at all floors, for all heights, and at all depth etc. as per drawing and
as directed by Project Manager.

b. Providing and fixing precast cement concrete ( M -15 grade) drain cover panels,
cum 0 5,500 -
fixed to MS flat as shown in the drawing or as called complete
Total : 2 : 47,522,510

3 MASONARY WORK 0 -
(Quoted Rates are for all heights, all depths, all levels, including basement to roof
(mumty) & all leads and lifts, including racking curved or circular masonary work, 0 -
racking of brick work should be 10mm)
3.1 Brick work in foundation 0 -
3.1.1 Providing and constructing brick masonry using selected quality burnt clay FPS
bricks of class designation 75 in foundation and plinth laid in cement mortar 1:6 (1
cement : 6 coarse sand) mix, joints finished, flush/ raked to 6mm depth including cum 197 4,250 837,250
scaffolding, curing complete as per specification and drawing or as directed by
Project Manager.
3.2 Brick work in superstructure 0 -
3.2.1 Providing and constructing brick masonry of thickness 230 mm or more in
basement & super structure for any shapes, fins, projections, in shafts, under
counter / platform / cupboards, using selected quality burnt clay FPS bricks of class
designation 75 laid in cement mortar 1:6 (1 cement :6 coarse sand) mix, joints cum. 1836 4,350 7,986,600
finished, flush/ raked to 6mm depth including scaffolding, curing complete as per
specification and drawing or as directed by Project Manager.

ALTERNATE ITEM: 0 -
3.2.1 Providing and laying flyash brick work using two hours fire rated flyash bricks in
a super structure above plinth level in cement mortar 1:6 ( 1 cement : 6 coarse sand )
including, curing, joints finished flush/raked to 12 mm depth,scaffolding cum. 0 -
etc.complete as directed by PM.
3.3 Same as item no. 3.2 (a.) above but using machine made bricks in place of
cum. R/O 3,900 -
FPS bricks
3.4 Half brick work 0 -
3.4.1 Providing and constructing half brick masonry using selected quality burnt clay FPS
brick of class designation 75 in super structure laid in cement mortar 1:4 (1
cement : 4 coarse sand) mix, joints finished, flush / raked to 6mm depth as directed
by Project in charge,the rate shall be including placing of 2 Nos 6mm dia. M.S. bars sqm 6572 680 4,468,960
at every third coarse , scaffolding, curing, complete as per specification and
drawing or as directed by Project in charge.

ALTERNATE ITEM: 0 -
3.4.1 Providing & laying Flyash brick work using two hours fire rated flyash bricks in half
a bricks walls in super structure above plinth level in cement mortar 1:4 ( 1 cement :4
coarse sand ) including joints finished flush/raked to 6 mm depth as work proceeds
including steel reinforcement (2 Nos of 6mm dia ) at every fourth course, cleaning
and soaking the bricks at least for 6 hours before use, curing for 7 days etc. sqm 0 650 -
complete at all heights / depth and for all leads.(MS Reinforcement to be provided
by the Contractor within the quoted rates). complete as directed by PM.

3.5 Brick work in staircase steps. 0 -

3.5.1 Providing and constructing brickwork in staircase steps using selected quality burnt
clay FPS bricks of class designation 75 in cement mortar 1:3 (1 cement : 3 coarse
sand) at all heights and levels including cutting, chamfering, scaffolding, curing, cum 0 3,600 -
complete as per specification..
Total : 3 : 0 13,292,810

4 WATER PROOFING 0 -
(Quoted Rates are for all heights, depths, levels, leads and lifts)
The operations describe below are only indicative & the item is to be executed as
per technical/ manufacturer's specification. 0 -
Testing shall be done by ponding water (150mm depth) for 72 hours.
Note: (The Water proofing work must be executed by an approved specialised
Agency. The Contractor shall give a 10 years guarentee as per instruction of the 0 -
Project Manager).
4.1 Tapecrete water proofing 0 -
Providing and laying composite built up waterproofing in the toilets/ kitchen/
pantry etc. comprising of three coats of Tapecrete or equivalent polymer, each
coat admixed with cement in the proportion 1:2 (one part tapcrete and two parts
cement) over a primer coat of neat cement sturry admixed with impermeable
chemical CH-9. After the second coat of tapecrete, all corners, edges, joints of
0 -
pipes with concrete / masonry should be sealed with epoxy putty. The
waterproofing treatment is to be laid underneath all sanitary pipes on the base and
taken up onto the verticals upto a level of minimum 300mm above the finished toilet
floor level including providing and fixing of PVC spout.

4.1.1 12mm thick protective plaster 1:4 (1 cement : 4 coarse sand) over treated surface
etc complete. (Quoted rate to include grouting of RCC surface for any cracks/ sqm. 1927 400 770,800
fissures)

Project:________________ 4 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
4.1.2 Providing and laying waterproofing treatment to the internal surface of water tank
with five coats of Tapecrete or equivalent water proofing comprising of four slurry
coats of Tapecrete polymer admixed with cement in the proportion 1:2 (one part
Tapecrete or equivalent and two parts cement), one putty coat of Tapecrete
admixed with silica powder and cement applied on the entire surfaces of the water
tanks. After the second coat of tapecrete or equivalent all corners, edges, joints of sqm 767 511 391,937
pipes with concrete etc should be sealed with epoxy putty. The Tapecrete or
equivalent treatment shall be applied directly on the smooth RCC surfaces over a
primer coat of neat cement slurry admixed with impremeable chemical.

4.2 Injection Water Proofing 0 -

Providing and applying Injection water proofing treatment for basement, under
0 -
ground tank and other RCC structure with the following operations:
4.2.1 FOR HORIZONTAL SURFACES 0 -
* Providing and laying water proofing treatment by chemical injection grout process
on basement, base of under ground water tank or other area as per specifications
comprising of two layers of Cement mortar 1:3 (1 cement : 3 coarse sand) mixed
with Acrylica water prooofing compound, providing and fixing 20mm pipe sleeves at
1.2m C/C and grouting acrylic based water proofing chemical mixed with neat sqm 795 450 357,750
cement slurry through the pipes with, complete with cutting & sealing of the pipes
as per specification and direction of Owner.

4.2.2 FOR VERTICAL WALLS 0 -

a From inside :- Providing and laying water proofing treatment by chemical injection
grout process in water tank (Under ground and Over head) or other areas using
20mm dia MS nozzles of minimum 25mm deep in walls placed and fixed @1.2m
distance in both direction in the wall and @ 0.75m c/c along construction joints,
consisting of injecting cement slurries of different viscosities under pressure by 0 -
pump using acrylic based water proofing chemical mixed with neat cement slurry
and sealing off nozzles after the injection operation with suitable admixture.

From outside:- Two coats of tapecrete or equivalent polymer, each coat admixed
with cement in the proportion 1:2 (one part tapecrete or equivalent and two parts
cement) over a primer coat of neat cement sturry admixed with impermeable
chemical CH-9. After the first coat of tapecrete or equivalent, joints of concrete sqm 1181 480 566,880
should be sealed with epoxy putty and shall be neatly plastered with cement mortar
(1:3) admixed with Acrylic Chemicals of 12 to 15 mm thick.

b ( alternate to 4.2.2a)Waterproofing treatment to retaining wall. 0 -

Providing and applying 15mm thick cement plaster 1:4 (1 cement : 4 coarse sand
over RCC surface with mixing of water proofing compound CICO or approved
equivalent @ 3% by weight of cement including hacking, raking of construction Sqm 0 180 -
joints, and spacer hole
4..3 Brick bat coba waterproofing 0 -
Providing on top of slab surface cement slurry mixed with water proofing compound
thereafter providing cement mortar 1:4 (1 cement : 4 coarse sand) 20mm thick with
polymer based water proofing compound and layer of new half broken bricks
(coba) giving gaps of 15-20mm between broken bricks, providing necessary
gradient for proper flow of water and providing cement slurry with water proofing
compound spread over brick bat coba in cement mortar 1:4 (1 cement : 4 coarse
sand) with water proofing compound filled in gaps of broken bricks and 20mm
plaster in cement mortar 1:4 (1 cement : 4 coarse sand) mixed with polymer based 0 -
water proofing compound, top finished smooth with neat cement and providing
rope chequers including extending the water proof plaster 300mm on vertical
surfaces with necessary chasing / treating of walls including providing and making
gola as per drawing etc. Average thickness of the brick bat coba to be avg.
125mm.

The item also include providing and making khurrahs 450mm x 450mm with
average minimum thickness of 50mm cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate of 20 mm nominal size) finished with aluminium
foil and 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat sqm 755 550 415,250
cement rounding the edges and making and finishing the outlet complete. (Plan
area will be measured and paid)

4.3.1 Add or deduct for extra or less thickness of brick bat coba waterproofing cum 0 2,854 -
4.4 Deck Slab Waterproofing 0 -
Providing and laying Terrace Garden roof waterproofing with the following
specification including cleaning of the RCC slab top surface. (Actual surface area 0 -
treated shall be measured & paid for)
A layer of bitumenous primer. 0 -
Alayer of hot refined mineral asphalt. 0 -
A layer of Polymeric Polyethylene membrane felt of 1mm thickness with 75mm
0 -
and 100mm side and end laps respectively.
A layer of hot refined mineral asphalt. 0 -
A layer of Polymeric Polyethylene membrane felt of 1mm thickness with 75mm
0 -
and 100mm side and end laps respectively.
A layer of hot refined mineral asphalt. 0 -
A layer of Polymeric Polyethylene membrane felt of 1mm thickness with 75mm
0 -
and 100mm side and end laps respectively.
Vertical: A layer of polymeric polyethylene membrane felt, a layer of Geo-Textile
and a layer of hessian felt type 3 grade 1, each layer laid in hot asphalt over a coat
of bituminous primer with 75mm and 100mm side and end laps respectively. sqm. 1909 650 1,240,850

4.5 Filter Media 0 -

Providing and laying 125mm thick filter media on extended basement roof or other
locations in 3 layers consisting of 100mm thick layer of well graded gravels (40mm
to 25mm size) including providing and laying 1.5 mm thick polypropylene non
woven needle punched geo textile fabric (180 g/sqm) of approved make with 150 sqm. 0 400 -
mm wide overlap, necessary joinery and top layer of 25mm thick coarse sand
complete as per drawing and directed by Project Manager.(Geo textile fabric shall
be measured and paid separately)

4.6 Geo textile fabric 0 -

Providing and laying 1.5 mm thick polypropylene non woven needle punched geo
textile Fabric (180 g/sqm) over gravelled surface of extended basement garden or
other locations of approved make with 150 mm wide overlap, necessary joinery sqm. 0 130 -
complete as per drawing and as directed by Project Manager. (Rate to include
laps).
4.7 Khurras 0 -
Making khurras 450mm x 450mm with average minimum thickness of 50mm
cement concrete 1:2:4 finished with 12mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement rounding the edges & finishing the outlet complete each 8 300 2,400
including providing suitable M.S.Iron grating.
4.8 Sunken area filling 0 -
Providing and laying on sunken areas broken light weight concrete block bats of
approximately 600 kg. per cum density laid, consolidated, finished smooth,
including finishing & grouting the top layer with water proof cement mortar with cum 317 3,500 1,109,500
CICO and as per specifications and drawing.
Total : 4 : 4,855,367

5.0 FLOORING WORKS 0 -

(Quoted Rates are for all heights, depths, levels, leads and lifts and for all design
0 -
and pattern shown in drawings)
5.1 Chequered tile 0 -

Project:________________ 5 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
5.1.1 Providing and laying 250mm x 250mm x 25mm thick chequered grey precast
cement concrete tile of approved shape over 25mm average thick base mortar of
mix 1:4 (1 cement : 4 Coarse sand) finished with flush pointing in cement mixed sqm 460 627 288,420
with pigment to match the shade of tiles in approved pattern, cutting, curing etc.
complete as per design & drawings.
Basic rate - 250 per sqm 0 -
5.1.2 Extra over item 6.1.1 of chequered tile flooring above for demarcation arrows with
sqm 0 128 -
red colour precast concrete tiles etc complete.
5.2 Glazed tile 0 -
Providing and fixing commercial quality white glazed ceramic tiles of size 200 x 200
mm & minimum thickness 5mm (floor, walls, jambs etc.) on 12mm thick cement
plaster 1:3 (1 cement:3 coarse sand) and jointed with white cement slurry including sqm. 767 579 444,093
cutting, curing etc. complete in all respect as per drawings.

Basic rate - 250 per sqm 0 -

5.3 RCC flooring 0 -
Reinforced cement concrete flooring (thickness 50mm to 125mm) using M20
grade concrete including the cost of side shuttering with MS channels, vibrating,
curing, groove cutting, but excluding the cost of reinforcement steel complete.
(Reinforcement if provided shall be paid separately under reinforcement item). At cum 488 3,200 1,561,600
all heights / depths and levels.(Each Panel area to be considered as 2 Sqm Only.)

5.4 Vaccum dewatering 0 -

Extra for vaccum dewatering the concrete floors using TREMIX or equivalent over
item no 5.4 and finishing the top surface to required level/ slope and grade with
rough / polish finish using power trowels (both fan & disc) of standard make
including curing, providing and mixing of hardening compound @ 2Kg/Sqm ,cutting
of VDF floor 100-150mm thick with Diamond Saw System (disposal of debris to be
sqm 4882 200 976,400
included in the quoted rate)as per specification including filling of Coalpor of Fosroc
make etc. complete as per specification and drawing. (Maximum thickness of RCC
flooring shall be of 150 mm) At all heights / depths and levels.

5.5 IPS floor 0 -

Providing and laying 40mm thick Cement Concrete 1:2:4 (1cement :2 coarse sand :
4 graded stone aggregate of 12.5mm nominal size) including and finished with a
floating coat of neat cement including cement slurry, 40mm wide and 6mm sqm 3004 265 796,060
thick.glass strip etc. complete in true lines and level as per specification and
drawing.
5.6 Cement plaster skirting / risers/ dados / platforms. 0 -
Providing and laying 18 mm thick Cement plaster with cement mortar 1:3 (1 cement
: 3 coarse sand) finished with a floating coat of neat cement as per drawing and sqm 0 232 -
design.
5.7 Hardonite flooring 0 -
Providing and laying 62mm thick heavy duty Non metallic hardonite (EMALITE by
the Structural Water Proofing Co. Pvt. Ltd. or approved equivalent) flooring
including 4 mm thick PVC strips of required size at 1.2 m c/c both ways and part
there off as required, under layer 50mm CC 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size) with 12mm thick topping, using grey
cement hardener mix by weight (2 hardener : 1 cement) and stone chips dry mixed sqm 0 400 -
in a ratio of 1:2 (1 hardener and cement mix : 2 stone chips of 6mm down gauge to
form dry mortar) complete with neat cement, finishing smooth including epoxy
coating (of approved make) of 300 microns.

Total : 5 : 0 4,066,573

6.0 PLASTERING WORKS 0 -

(Quoted Rate shall be for all heights, depths, levels, leads and lifts and to include
providing and fixing chicken wire mesh in junction RCC and brick / AAC Block walls 0 -
etc for internal and external plaster works).
6.1 Wall plaster - Internal Plaster 0 -
6.1.1 Providing and applying 12 to 15mm thick plastering for RC walls, RC columns,
beams, masonry piers, masonry walls, etc., in cement mortar 1:6, finished smooth
including scaffolding, curing, etc., complete. with all lead and lift and as directed by
Engineer in charge rate including providing & fixing in position galvanised 6" wide
chicken mesh made out of galvanized iron of nominal thickness 0.35 mm with a
Zinc coating of 120 gms per Sqm at the junctions of Masonry and concrete works
and other locations as called for including fixing with GI nails, fixing Arpitha Corner sqm 31652 150 4,747,800
Bead of size 45 x 45 mm made out of galvanized iron of nominal thickness 0.45
mm with a Zinc coating of 120 gms per Sqm as protector for plastered wall and
column corners/edges from chipping , including tying in position by using suitable
nails / clamps / screws etc. to concrete surface & etc., complete.

Cost without Arpita Beads 0 -

6.1.2 Providing and applying Gyproc Onecoat Gypsum Plaster (Elite-80) having 80
SqMtr/MT coverage conforming to I.S.2547 (Part I & II) 1976 internally at 13 mm
thickness in a single coat of Saint-Gobain Gyproc India (India Gypsum)
make.Water to Onecoat Gypsum Plaster (1 part of water: 2 part of plaster) should
be maintained to have good cohesive workable mix . Mix Onecoat to water (not
vice versa),use a mixing rod for thorough mixing and avoid lumps and unmixed
residues. After complete drying which usually takes approx 72 hrs.depending upon
the weather and thickness the plain surface is ready for painting. It is also
recommended to pre wet the surface before application so as to achieve more
spread and higher coverage .The background to be plastered should be sqm 170 -
thoroughly brushed with broom to be free of all lose particles and clean traces of
mould oil to for all types of RCC work (small or big) brick/stone work surfaces
including wall tops, jambs and cillings etc.As per manufacturer's instructions at all
floors and locations of masonary works and RCC roof finished with 'Bond It' a
polymer adhesive , to correct line, level,smooth finish and plumb including
preparing the surface,scaffolding, etc., complete as per specifications and
drawings.

6.1.3 Extra for providing and fixing of PVC mesh at the junction of rcc and brick and in
Rmt -
places of condutes work will be charged extra.
6.2 Ceiling plaster 0 -
Providing and applying 6mm thick plaster to RCC slab in cement mortar 1:4 (1
cement : 4 fine and coarse sand in equal proportion) finished smooth including
scaffolding, curing, making grooves at desired location etc. complete as per sqm 9938 145 1,441,010
drawing.
6.3 20 mm cement plaster in two layer -External Plaster 0 -
Providing and applying 20 mm thick plastering on external walls, columns, beams ,
pergola beams and any projections, plaster bands as per drawing etc. in two layers
base layer 14 mm thick of cement mortar 1:5 (1 Cement : 5 coarse sand) and top
layer 6 mm thick 1:4 ( 1 cement : 4 fine sand) including cost of mixing water proof
compound to be applied for both coats, finished to line and level, including all
leads, lifts, scaffolding and curing complete. The rate is inclusive of forming of drip
moulds as with all lead and lift and as directed by Engineer in charge including sqm 11048 350 3,866,800
providing and fixing in position galvanised expanded metal mesh 20 gauge at
junctions of concrete and masonry and other locations as called for including fixing
with GI nails. Fixing approved column / , plaster band and cornices as called for
etc., complete at all levels

6.4 Waterproof plaster 0 -

12mm cement plaster 1:4 (1 cement : 4 coarse sand) including providing & mixing
water proofing compound (CICO) as per manufacturers specification and with a sqm 0 130 -
floating coat of neat cement.
Total : 6 : 0 10,055,610

Project:________________ 6 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.

7.0 FINISHING WORKS 0 0 -

7.1 White washing 0 -
Providing and applying three or more coats of white wash on wall and ceiling to
give an even shade including primer and preparation of surfaces, along with sand
papering wherever required, scaffolding, mixing of indigo blue and DDL etc. sqm. 1174 25 29,350
complete.
7.2 Cement paint 0 -
Providing and applying three or more coats to plastered brick or RCC surfaces by
cement bases paint, (SUPER SNOWCEM) of approved colour and shade to give
an even finish including cost of preparing the surface, curing, scaffolding etc. sqm. 0 65 -
complete.
7.3 Texture paint 0 -
Providing and applying two or more coats of texture paint on wall surfaces over a
coat of primer including surface preparation scaffolding etc complete and top 0 -
surface finished as per requirement of Architect and Project Manager.
7.3.1 Applicator basic rate with material Rs. 150 /- per sqm. For external finish excluding
the cost of scaffolding sqm 11048 225 2,485,800

7.4 WOOD WORK FOR DOOR FRAME 0 -

7.4.1 Fixing of woodwork in frames of doors, including applying wood primer and 300
mm X 45 X4 mm MS holdfast of 6 (six) nos in each chowkhat (Cost of primer and
hold fast including in rate), drilled and anchored to rcc member and fixed in 300 X
500 x width of wall mm, by concrete of M20 grade in position.complete as per 0 -
drawing/requirement of Architect and Project Manager.(Only wooden chowkhat
shall be supply by the client free of cost)

a) Any size of chowkhat Rmt 3731 150 559,650

Total : 7 : 0 3,074,800

8.0 MISCELLANEOUS 0 -
(Quoted Rates are for all heights, depths, levels, leads and lifts) 0 -
8.1 Structural Steel 0 -
Supplying, fabricating, assembling, hoisting / erecting and fixing in position at all
heights and with all leads, structural steel works of MS rolled sections (angle,
channel, beams, flats, tees, insert plates, bolts etc.) all as per structural drawings
0 -
and as per detailed specifications (for materials & workmanship) in the situations
described hereinafter including:

i) Cutting of components to required lengths/ widths and shapes/profiles,

ii) Smooth grinding / machining of edges / faces / all welding joints.
iii) Preparing the surface to ensure complete removal of mill scale by grit &
sand blasting to achieve finish to grade SA 2.5.
iv) Necessary welding (electric arc welding) for required weld lengths and sizes 0 -
v) Allow for surface preparation, derusting primer coat, three or more coats of
synthetic enamel paint etc. complete all as directed by the Project Manager.

Note: The contractor shall submit fabrication drawings for work involved based on
construction drawings (that may be issued during construction period) for approval
by the Project Manager.
The fabrication work shall start only after approval of the fabrication drawings. Any
change required in the fabrication drawings shall be carried out at no extra cost.
Fabrication shall be in a perfect Architectural workmanship manner and as
provided in Section V & VI of IS 800 & IS 7215.
Welding shall be carried out by qualified welders. kg. 0 100 -
Electrodes for welding, the procedure, selection, test and inspection shall confirm
to provisions in IS 816, IS 818, IS 822, & IS 833.
Erection/ hoisting shall commence only after passing of fabricated parts by the
Project Manager.(Basic rate Rs. 48/Kg)

8.2 Mild steel work 0 -

8.2.1 Providing and fixing in screen, guard rail, gratings, drain cover, ladder, angle iron,
column guards, foot rests, Trellis, jali etc made of MS Pipe, MS square bars/tube
with MS flats, MS shoes welded as per design and drawing including bending to
profile as per drawing, grinding, cutting holes in RCC / Stone work, grouting the kg 2763 110 303,930
balustrades in position etc. complete including providing two coats of red oxide
primer.

8.3 Rolling shutter 0 -

8.3.1 Supplying and fixing rolling shutters of approved make made of 80 x 1.25 mm MS
laths inter locked together through their entire length and jointed together at the
end by end locks mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with push and pull
operation complete including the cost of providing and fixing necessary 27.5 cm
long wire springs Grade no. 2 and MS top cover 1.25 mm thick for rolling shutters sqm. 12 3,894 46,728
including ball bearing, opening and closing system by gear and lever
operation including cost of two coat of red oxide primer and three or more
coats of synthetic enamel paint of approved brand and shade.

8.3.2 Extra over item 8.3.1 of rolling shutter for providing MS flexible grill of 8mm dia
round bars. (The area of flexible grill provided shall be measured for payment) sqm. 0 500 -

8.4 MS Steel door 0 -

8.4.1 Providing and fixing M.S. Steel doors made out of ISA 50x50x6, ISA 30x30x5
frames with 16 gauge M.S. sheet of approved profile including fittings fixtures tower
bolts, locking arrangement, aldrop, hinges etc. Cost includes two coat of red oxide sqm. 2 3,738 7,476
primer. (M.S. sheet to be provided on one face only).
8.5 MS Rungs 0 -
8.5.1 Providing and fixing in position the PVC coated MS steps of size 300 X 150 mm for
UG Sump and OH Tank including placing 150 mm inside concrete ( while doing the
form work ), aligning during concreting, grouting the junction if required. each 31 300 9,300

8.6 PVC water stops 0 -

Providing and placing in position suitable PVC water stops fixed suports made out
of reinf. bars bent to profile and placed 300mm c/c along the lenght of water stop of
approved make for construction / expansion joints between two RCC members and
fixed to the reinforcement with binding wire and supports made out of 0 -
reinforcement bars bent to profile and placed 300mm c/c along the length of water
stop before pouring concrete etc.

8.6.1 Dumb bell with central bulb (150mm wide, 6mm thick) rmt 0 254 -
8.6.2 as above but 230 mm wide & 9mm thick. rmt 0 363 -
8.6.3 as above but 300 mm wide & 9mm thick. rmt 0 497 -
8.7 Expansion joint AND CORE CUTTING 0 -
8.7.1 Providing and fixing armour board for expansion joints between column, beam,
slab and walls etc. as per manufacturers specification and recommendation. 0 -

a. For 75 mm thick joint sqm. 120 1,267 152,040

b. For 50 mm thick joint sqm. 0 848 -
c. For 25 mm thick joint sqm. 0 560 -
8.7.2 Providing and fixing polyethylene backup rods of approved make, in expansion
0 -
joints as per specifications and direction of Project Manager.
a. For 75 mm thick joint rmt 126 140 17,640
b. For 50 mm thick joint rmt 0 120 -
c. For 25 mm thick joint rmt 0 100 -
8.7.3 Providing and filling grooves with polysulphide sealant of approved make in
expansion joints and other situation where shown in drawing. The rate includes the
cost of all ancillary works as required, as per specifications and as recommended 0 -
by manufacturer and as directed by Project Manager.
a. 75 x 12mm Sectional size. rmt 126 1,640 206,640

Project:________________ 7 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
b. 50 x 12mm Sectional size. rmt 0 1,120 -
c. 25 x 12mm Sectional size. rmt 0 700 -
8.7.4 Supplying and fixing in position in recess or on surface the following size of 16/14
SWG MS conduit including cost of cutting all chases & filling the surface with
cement mortar and providing all accessories such as tees, bends, Junction boxes 0 -
with metallic covers complete as required.
a. 25 mm rmt 0 198 -
b. 32 mm rmt 0 239 -
c. 40 mm rmt 0 289 -
d. 50 mm rmt 0 363 -
8.7.5 Item same as above for using PVC conduits instead of MS conduit. 0 -
a. 25 mm rmt 0 74 -
b. 32 mm rmt 0 116 -
c. 40 mm rmt 0 149 -
d. 50 mm rmt 0 198 -
8.7.6 Providing and fixing before casting circular/hexagonal M.S. sheet ceiling fan box
with clamp of internal dia. 140 mm , 73 mm height, 3mm thick rim, top and bottom
lid of 1.5 mm M.S. Sheet. Lids shall be screwed into M.S. box by means of 3mm Nos 0 200 -
round headed screws, clamps shall be made of 12mm dia. M.S. bar bent to shape
as per standard drawing with over all length as 80 cm.
8.80 Puddle Flanges 0 -
Providing & fixing Galvanised or plastic coated water bar (Puddle Flange) threaded/
flanged ends as the case may be, upto 1200 mm long of the following diameter
8.8.1 fabricated from G.I. (IS:1239 Heavy class or IS:3589 -6 mm wall thickness) pipe. 0 -
[Pipe make-'MSL or eq.']
a. 25 mm dia each 2 437 874
b. 50 mm dia each 2 717 1,434
c. 80 mm dia each 2 1,245 2,490
d. 100 mm dia each 2 1,723 3,446
e. 150 mm dia each 2 2,610 5,220
f. 200 mm dia each 2 4,590 9,180
8.9 PVC sleeves 0 -
Providing and fixing UPVC sleeves (6kg / sqm) properly fixed in wall, column,
8.9.1 0 -
beams, floor and top slab of following diameters:
a. 50 mm outlet dia 300 to 500 mm long each 0 200 -
b. 75 mm outlet dia 300 to 500 mm long each 0 275 -
c. 110 mm outlet dia 300 to 500 mm long each 0 350 -
d. 160 mm outlet dia 300 to 500 mm long each 0 400 -
e. 200 mm outlet dia 300 to 500 mm long each 0 450 -
8.9.2 Extra for additional length of UPVC sleeves (6kg / sqm). 0 -
a. 50 mm outlet dia Rmt 0 218 -
b. 75 mm outlet dia Rmt 0 305 -
c. 110 mm outlet dia Rmt 0 508 -
d. 160 mm outlet dia Rmt 0 798 -

Project:________________ 8 of 9
 Bill Of Quantities Price Schedule

(Tower 1B+GF+14)
Sr.
Description of Items UOM Qty. Rate Amount
No.
8.10 Fire seals 0 -
Providing and sealing with fire rated selars by promaseal expansion joint strip
0 -
installed as per manufacturer (promat) specification.
FS50 (50mm thick) Rmt. 0 497 -
8.11 Welding of reinforcement steel 0 -
Welding steel reinforcement of any diameter for laps, with insert plates as per
specifications at all locations as called for including the cost of all materials, labour, 0 -
tools and tackles and processes complete.
per cm
8.11.1 Bult welding weld 0 20 -
length
per cm
8.11.2 Point Welding weld 0 6 -
length
8.12 Expansion Fasteners 0 -
Supplying and fixing expansion fasteners including testing for fixing into already
8.12.1 constructed structure (quoted rate to include design & testing of fasteners for its 0 -
performance).
a. 8mm dia - standard length each 0 243 -
b. 10mm dia - standard length each 0 365 -
c. 12mm dia - standard length each 0 486 -
Item same as 2.11.1 but using Chemical Resin Fasteners instead of expansion
8.12.2 Fasteners (quoted rate to include design & testing of fasteners for its performance). 0 -

a. 8mm dia - standard length Nos 0 454 -

b. 10mm dia - standard length Nos 0 632 -
c. 12mm dia - standard length Nos 0 940 -
8.13 Closing of cutouts 0 -
Closing of cut outs made in any RCC or Brickwork with Cement concrete of M25
grade or Cement mortar of 1 : 4 mix as required, including waterproofing 0 -
compound, neat cement finish etc complete as directed.
For brick/ block masonry -upto a max. thickness of 300mm
8.13.1 sqm. 0 3,957 -
For RCC work - upto a max. thickness of 300mm
8.13.2 sqm. 0 3,957 -
8.14 Re - Bar 0 -
8.14.. Supplying and Fixing chemical rebar fastening with Hilti- HY 150 and complete as
0 -
1 per manufacturer
a. 10 mm dia bar Nos 0 206 -
b. 12 mm dia bar Nos 0 256 -
c. 16 mm dia bar Nos 0 619 -
d. 20 mm dia bar Nos 0 1,130 -
e. 25 mm dia bar Nos 0 1,403 -
f. 32 mm dia bar Nos 0 2,888 -
Item same as 2.13.1 but for using RE - 500 instead of HY - 150
8.14.2 0 -
a. 10 mm dia bar Nos 0 256 -
b. 12 mm dia bar Nos 0 371 -
c. 16 mm dia bar Nos 0 718 -
d. 20 mm dia bar Nos 0 1,361 -
e. 25 mm dia bar Nos 0 1,733 -
f. 32 mm dia bar Nos 0 3,713 -
Total : 8 : 0 766,398
9.0 DISMANTLING WORK 0 -
Dismantling of brick work in cement mortar, (full brick) with plaster on both sides
9.1 stacking of serviceable material and disposal of unserviceable material to dumping cum. 0 774 -
area as directed by Project Manager.
Dismantling of brick work in cement mortar, (half brick) with plaster on both sides
9.2 stacking of serviceable material and disposal of unserviceable material to dumping sqm 0 95 -
area as directed by Project Manager.
Dismantling of RCC works in beams, columns, slabs etc. including sub-base,
cutting and removal of reinforce-ment, stacking of serviceable material and
9.3 disposal of unserviceable material to dumping area as directed by Project cum 0 4,816 -
Manager.
Chipping of Plaster/Brick work and disposal of malba out side the premises as
9.4 sqm 0 77 -
directed by Project Manager.
Dismantling of existing all types of flooring/subbase and stacking the removed
9.5 material in proper way or dumping the same as directed Project Manager including cum 0 1,290 -
disposal of the same out of site premises.

Except RCC -
Total : 9 : 0 0
Total 87,223,626

Service Tax inclusive

Net Total 87,223,626

Project:________________ 9 of 9