Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    1055 NZ Primer P

    Uploaded by

    Christina
    NZ PRIMER P is a quick drying, anti-pollution shop primer that provides preliminary protection for blast-cleaned steel plates. It is compatible with most priming coats and resistant to heat, water, oil, and solvents. The primer has a mixing ratio of 16 parts base to 4 parts hardener by weight, dries within 3 hours at normal temperatures, and allows overcoating within 16-24 hours for protection during storage or transport.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1055 NZ Primer P

    Uploaded by

    Christina
    14 views1 page
    NZ PRIMER P is a quick drying, anti-pollution shop primer that provides preliminary protection for blast-cleaned steel plates. It is compatible with most priming coats and resistant to heat, water, oil, and solvents. The primer has a mixing ratio of 16 parts base to 4 parts hardener by weight, dries within 3 hours at normal temperatures, and allows overcoating within 16-24 hours for protection during storage or transport.

    Original Title

    1055 NZ PRIMER P

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    NZ PRIMER P is a quick drying, anti-pollution shop primer that provides preliminary protection for blast-cleaned steel plates. It is compatible with most priming coats and resistant to heat, water, oil, and solvents. The primer has a mixing ratio of 16 parts base to 4 parts hardener by weight, dries within 3 hours at normal temperatures, and allows overcoating within 16-24 hours for protection during storage or transport.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views1 page

    1055 NZ Primer P

    Uploaded by

    Christina
    NZ PRIMER P is a quick drying, anti-pollution shop primer that provides preliminary protection for blast-cleaned steel plates. It is compatible with most priming coats and resistant to heat, water, oil, and solvents. The primer has a mixing ratio of 16 parts base to 4 parts hardener by weight, dries within 3 hours at normal temperatures, and allows overcoating within 16-24 hours for protection during storage or transport.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    No.

    1055
    NZ PRIMER P
    CPI

    NZ PRIMER P, based on a combination of epoxy resin, rust-preventive pigments and hardener, is quick
    drying and gives adequate preliminary protection of blast-cleaned steel plates. It is compatible with almost any
    type of priming coats and highly resistant to heat, oil, water and solvents.

    TECHNICAL DATA
    Type : Anti-pollution type non-lead and non-chrome shop primer for powder
    electro marking system
    Recommended Use : As a shop primer for protection of blast-cleaned steel plates. Especially
    suitable for steel plates subject to prolonged weathering.
    Mixing Ratio : Base : Hardener = 16 : 4 (by weight)
    Colour : Dark Brown, Green, Grey
    Specific Gravity : 1.30 kg/l
    Flash Point : 5°C
    Solids by Volume : 24.7 %
    Coverage(Theoretical) : 0.088 L/m² ; 115 gr/m²
    Dry Film Thickness : 0.9 mils ; 22 µ
    Drying Time : Temperature 5°C 10°C 20°C 30°C
    Surface Dry 8 min. 7 min. 4 min. 3min.
    Hard Dry 3 hrs. 3 hrs. 2 hrs. 1.5 hrs.
    Painting Interval : Minimum 24 hrs. 24 hrs. 16 hrs. 8 hrs.
    Maximum - - - -
    Pot Life : 72 hrs. 72 hrs. 48 hrs. 24hrs.
    Thinner : NZ PRIMER THINNER
    Method of Application : Airless Spray, Brush, Roller
    Conditions of Application : Temperature Minimum 5°C
    Humidity Maximum 85 % R.H.
    For Airless Spray ;
    Tip No. GRACO 163-719, 721
    Paint output pressure 90 – 120 kgf/cm²
    Viscosity 9 – 10 Sec. (Ford Cup No. 4)
    Thinning 10 – 25 % by weight
    Preferable Subsequent Coats : Any one of our products and the equivalent, e.g.: Oleo resinous paint,
    Chlorinated Rubber paint, Vinyl paint, Epoxy paint, Tar Epoxy paint
    Packaging : Two pack product

    Note:
    Expected life for outdoor exposure (at normal conditions): about 4 months.

    The Information given in this sheet is effective at the date shown above and subject to revision from time to time without notice

    You might also like