Residential/Commercial Irrigation Specification Catalog

Residential/Commercial
Irrigation Specification Catalog
2012-2013
Our purpose is to help our customers
enrich the beauty, productivity and
sustainability of the land
Consistent with the principles on which we were founded, The Toro Company is committed to helping customers
enrich the beauty, productivity and sustainability of the land with innovative precision irrigation systems. At
the same time, we employ strategies and practices to protect, support and enhance the human and natural
resources important to our future.
Product Innovation
We thrive on innovation. From our beginnings in 1914, we built our name and following
by providing innovative solutions to customers’ needs. Today, this rich legacy continues as
we strive every day to develop exciting new products and services that yield performance,
productivity and environmental benefits to our customers.
• Toro® Precision™ Soil Sensor - leveraging the same Toro Turf Guard® sensing technology
used on high-end commercial sites and world-class golf courses around the globe, the Toro
Precision Soil Sensor continuously measures moisture levels in the soil and determines
when to allow the irrigation controller to water, maximizing the efficiency of your
irrigation system.
• Toro® Precision™ Series Spray Nozzles – with patented H20 chip technology – represent
the most significant breakthrough in spray nozzle technology in over 60 years. Invisible
to the naked eye, water streams oscillate at over 200 cycles per second to generate a more Toro Precision™ Series
consistent droplet size to reduce runoff and provide up to 30% water savings. Spray Nozzles
Precision™ Irrigation
It is not enough to be “smart;” to truly save water, one must be smart and precise. We
believe Toro is positioned as the best partner you can have for thriving in today’s new
economy. We have developed advanced solutions that assess site conditions including
soil properties, plant health, topography, and irrigation efficiency to help customers better
manage resources and turf conditions.
The Toro Precision Irrigation Portfolio is:

• Universal – products are designed to fit multiple manufacturers’ equipment
• Simple – no digging, trenching or complicated wiring
• Immediate – as soon as you install, you start using less water (no system adjustments)
We have added new products to our portfolio including the Precision™ Soil Sensor and
Precision™ Rotating Nozzles that immediately use less water and fit not only Toro products
but most of our competitors. Toro’s full suite of Precision™ Irrigation Solutions are perfect for
the retrofit market, and many antiquated systems are ripe for upgrade.
Toro Precision™Soil Sensor
Community
The Toro Giving Program has built a legacy of environmental, educational and community support that is deeply rooted in
our culture.
• Provide annual financial support to environmental organizations.
• Host employee activities to renovate parks and restore lakes, rivers and landscapes to their natural beauty.
• Support environmental research projects on the precision application of water.
• Educate individuals of all ages on environmental issues - Toro’s WaterSmart® Symposium brings together customers
and industry experts to discuss resource challenges, improved management practices, and advanced
irrigation technologies.
• Fund turf management research programs at leading academic institutions to improve product efficiency
and productivity.
• Donate precision irrigation technologies to nonprofits to maintain their landscapes and reduce water use.
Customer Care You Can Count On
Toro Technical Support

Our technical support team is truly extraordinary at what they do. Between them
they have over 100 years of irrigation experience that you can depend on. For an
excellent support experience, call 1-877-345-TORO (8676) or email
[email protected].
There are also many helpful tips on the Toro YouTube site at
www.youtube.com/user/toro/featured.
Toro Controller Repair

Did you know that with Toro’s Board Exchange Program you can get the
replacement controller boards you need immediately? Through your distributor,
controller repair provides controller boards ready for immediate board exchange to
assure that controller downtime is minimal and your landscape and reputation stays
protected. For immediate assistance call 1-877-345-TORO (8676), Monday – Friday,
6:00 AM – 3:30 PM PST.
Toro Training
Toro offers its customers training and education on new product technology,
water management best practices, and provides world-class business skills training
for professional contractors to help them increase productivity and improve their
bottom line. For online product training, visit www.torocontractor.com/. To learn
more about other educational opportunities in your area and nationwide, call
1-877-345-TORO (8676).
Toro NSN®
Toro’s National Support Network (NSN) is a team of A+ certified technicians
and licensed irrigators dedicated to the daily operations and maintenance of
computerized central control systems. Every new Toro computerized central
irrigation control system includes Toro NSN support, as well as convenient
classroom, web and computer-based training. For assistance call
1-888-676-TORO (8676) or visit www.toronsn.com.
Toro Online Information

We offer a complete listing of all irrigation products at (www.toro.com/irrigation)
along with links to Distributor locator, CAD Details, and product literature. Specialty
sites for our contractor partners (www.torocontractor.com) and water management
highlights (www.torowatersmart.com) are full of great information at your fingertips.
ANATOMY OF A SMART
IRRIGATION SYSTEM
All the parts of an irrigation system… controller, valves,
sprinklers… work together to ensure your customers’ plants
get proper watering. Replacing just one portion of their
system with efficient products helps save water. Over time,
replacing all components of their system (or installing a
new system) with efficient irrigation products ensures
optimum savings.
Precision™ Soil Sensor

Page 96
RainSensor™ Series Intelli-Sense™

with patented Water Professional
Conservation Modes ET-Adjusting
Page 98 Smart Controller
Page 84
TPV Valve Series

with patented
DBS Technology™
Page 62
P-220 Valve with TFS Series

Pressure Regulation Flow Sensor
Page 68 Page101
TPV Drip Zone Kit

Page 140
4
T5 Rotor with
patent pending
Air Foil Distribution
Technology
Page 38
Precision™ Series
Spray Nozzles with patented
H²O Chip Technology
Page 18
570ZXF Sprays with patented

X-Flow® Valve-In-Stem
Shutoff
Page 14
Precision™ Series
Rotating Nozzles with
Planetary Gear Drive
Page 22
DL2000® Subsurface
Dripline with patented
ROOTGUARD®
Technology
Page 122
5
Table of Contents
Sprays Pages 8-31
Fixed Sprays Overview...............8-9 TVAN Variable Arc Nozzles..........26

LPS Series...............................10-11 Stream Spray Nozzles.................27
570Z & 570ZLP Series...........12-13 Stream Bubbler Nozzles..............27
570ZXF Series........................14-15 Pressure-compensating
570ZPR & 570ZPRX Series.....16-17 Flood Bubblers............................28
Precision™ Series 500 Series Bubblers.....................28
Spray Nozzles........................18-21 Spray Tools and Accessories........29
Precision™ Series Super Funny Pipe®.....................30
Rotating Nozzles....................22-23 Super Funny Pipe Swing Joints....31
MPR Plus Nozzles...................24-25 Super Funny Pipe Fittings...........31
Rotors Pages 32-57
Rotors Overview.....................32-33 TR70XTP Series.....................46-47

Mini 8 Series.........................34-35 Sports Field Solutions................48
300 Series Stream Rotor®......36-37 640 Series............................49-51
T5 Series................................38-39 TS90 Series...........................52-53
Super 800 Series....................40-41 TG101................................54-55
TR50XT Series........................42-43 690 Series.................................56
T7 Rotor.................................44-45 Rotor Accessories.......................57
Valves Pages 58-75
Valves Overview.....................58-59 P-220 Series.........................68-69

EZ-Flo® Plus Jar Top Series.....60-61 P-220 Scrubber Series...........70-71
TPV Series..............................62-63 220 Brass Series...................72-73
250/260 & 254/264 Series....64-65 Quick Coupler Series.................74
252 Series..............................66-67 Valve Accessories.......................75
Controllers Pages 76-93
Controller Overview..............76-77 TIS-612 Series............................86

DDC™WP............................78-79 TIS-PRO Series..........................87
TMC-212...........................80-81 Custom Command™ Series.... 88-89
TMC-424E............................82-83 TDC 2-Wire System..............90-92
TIS Family (Intelli-Sense™)..........84 TDC+.................................93
ET Everywhere™.........................85
6
Sensors and Remotes Pages 94-103
Sensors and Remotes Overview TFS (Flow Sensors)..................100

...........................................94-95 Electric/Hydraulic Converter....101
Precision™ Soil Sensor.........96-97 EZ-Remote®............................101
Wireless RainSensor™...............98 TMR-1
Wired RainSensor™..................99 (Toro Maintenance Remote)....102
EICON Remote........................103
Central Control Pages 104-119
Central Control Overview...104-105 Hand Held Remote.................114

TriComm™ System............106-107 Retro Link................................114
Sentinel® Central Control...108-109 Sentinel Weather Sources........115
Sentinel Controllers............110-111 Turf Guard®.....................116-117
Sentinel Two-Wire.....................112 NSN® National Support
Sentinel Wireless Output Board...113 Network.................................118
Sentinel Custom Control Series EICON Special Build...............119
.................................................113
Landscape Drip Pages 120-141
Landscape Drip Overview Turbo SC® Plus Emitter....132-133

........................................120-121 E-2® Classic Emitter.................134
DL2000® Series PC Dripline Pressure Regulating
.........................................122-123 Multi-Outlet Manifold..............135
Drip In® PC Brown Dripline Drip Bubblers (Pressure Compensating)
.........................................124-125 .................................136-137
DL2000® Series Microline.........126 Varis® and Varistake®
Soakerline™ Classic Dripline.....126 Adjustable Emitters..................138
Loc-Eze® Fittings Pressure Regulators…..............138
and Accessories........................127 Plastic Y Filters.........................139
Blue Stripe® Poly Hose......128-129 Drip Zone Valve Kits..........140-141
NGE® Emitters.................130-131
Resources Pages 142-179
Customer Support....................142 Pressure Loss/Water Meters......165

Formulas and Conversion Wire Sizing..............................166
Factors.....................................143 Sprays Metric Data..........167-170
Sprinkler Spacing and Rotors Metric Data...........171-175
Winterization............................144 Valves Metric Data..................176
Friction Loss Landscape Drip
Characteristics...............145-163 Metric Data......................177-178
Drip Equations..........................164 Warranty Information..............179
7
Fixed Sprays Overview
Model LPS Series 570Z 570ZLP 570ZXF 570ZPR 570ZPRX

Page Number 10-11 12-13 12-13 14-15 16-17 16-17
Radius 2’-18’ 2’-26’ 2’-26’ 2’-26’ 2’-17’ 2’-17’
(0,6m-5,5m) (0,6m-7,9m) (0,6m-7,9m) (0,6m-7,9m) (0,6-5,2m) (0,6-5,2m)
Flow Range 0.05-4.50 GPM 0.05-4.50 GPM 0.05-4.50 GPM 0.05-4.50 GPM 0.05-3.45 GPM 0.05-3.45 GPM
(0,19-17,0 LPM) (0,19-17,0 LPM) (0,19-17,0 LPM) (0,19-17,0 LPM) (0,19-13,0 LPM) (0,19-13,0 LPM)
Operating
20-50 PSI 20-75 PSI 15-75 PSI 20-75 PSI 20-75 PSI 20-75 PSI
Pressure Range (1,4-3,5 Bar) (1,4-5,2 Bar) (1,0-5,2 Bar) (1,4-5,2 Bar) (1,4-5,2 Bar) (1,4-5,2 Bar)
(inlet)
Turf X X X X X X
Shrubs/Ground
X X X X X X
Cover
Slopes X X X X X X
High Pressure
X X X X
Systems
Low Pressure
X X
Systems
Medians X X X
High Traffic
X X X
Areas
High Wind X X
Pop-up Height 2” (50 mm) 2” (50 mm)
To Nozzle 3” (75 mm) 3” (75 mm) 4” (100 mm) 4” (100 mm) 4” (100 mm)
2” (50 mm)
4” (100 mm) 4” (100 mm) 6” (150 mm) 6” (150 mm) 6” (150 mm)
4” (100 mm)
6” (150 mm) 6” (150 mm) 12” (300 mm) 12” (300 mm) 12” (300 mm)
12” (300 mm) 12” (300 mm)
Side Inlet Option 6” (150 mm) 6” (150 mm) 6” (150 mm) 6” (150 mm) 6” (150 mm)
12” (300 mm) 12” (300 mm) 12” (300 mm) 12” (300 mm) 12” (300 mm)
Check Valve
X X X X X X
Option
Effluent Water
X X X X X
Option
Shrub Model X X X X X
Zero Flush X X X X X
X-Flow® Water
X X
Shut-off
Built-in Pressure
X X
Regulator
Serviceable Seal X X X X X
Warranty Two years Two years Two years Two years Five years Five years
WaterSmart® Feature
8
Nozzles Overview
Note: All 570 nozzles work in all Toro® sprays.

Precision Series also offer additional models to fit Irritrol®, Rain Bird®, and Hunter® sprays.
Recommended
Model Radius Arcs Flow Range Operating
Pressure
5’-15’ (1,5-4,6m)
60°, 90°, 120°,
Precision™ Series 4’x9’ (1,2-2,7m)
150°, 180°, 210°, .038-2.4 GPM 30 PSI
Spray Nozzles 4’x15’ (1,2-4,6m)
240°, 270°, 360° (0,14-9,08 LPM) (2,0 Bar)
Page 18-21 4’x18’ (1,2-5,5m)
and Specialty
4’x30’ (1,2-9,1m)
Precision™ Series
14’-26’ 45° to 270°, .38-3.78 GPM 40-50 PSI
Rotating Nozzle (4,3m-7,9m) Full-circle (1,43-14,3 LPM) (2,8-3,5 Bar)
Page 22-23
5’-15’
(1,5m-4,6m) 1/4, 1/3, 1/2, 2/3,
MPR Plus 0.05-4.58 GPM 30 PSI
Speacialty Patterns 3/4, Full
Page 24-25 2’-30’ and Specialty
(1,9-17,3 LPM) (2,0 Bar)
(0,6m-9,1m)
TVAN 8’-17’ 0.7-5.60 GPM 30 PSI

0°-360°
Page 26 (2,4m-5,2m) (2,65-21,2 LPM) (2,0 Bar)
Stream Sprays 13’-22’ 0.6-2.70 GPM 30 PSI

1/4, 1/2, Full
Page 27 (4,0m-6,7m) (2,3-10,2 LPM) (2,0 Bar)
Stream
1.5’-18’ 1/4”, 1/2”, Full, 0.49-2.02 GPM 20-30 PSI
Bubblers (0,5m-5,5m) 2X180, 4x180 (1,85-7,64 LPM) (1,4-2,0 Bar)
Page 27
Flood
0.25-2.0 GPM 20-30 PSI
Bubbler PC Circle Flood
(0,94-7,6 LPM) (1,4-2,0 Bar)
Page 28
500 Series
6’-17’ 2/60, 4/60, 6/60, 1.08-3.70 GPM 20-30 PSI
Bubblers (2,13m-5,2m) 2/180 (4,1-14,0 LPM) (1,4-2,0 Bar)
Page 28
9
LPS Series Sprays
• 2” (50mm) and 4” (100mm) Pop-up
• Radius: 2’-18’ (0,6-5,5m)
• Operating Pressure Range: 20-50 psi (1,4-3,5 Bar)
The Toro® LPS Series meets the demand Features & Benefits
without sacrificing quality. These fixed sprays
feature a durable, compact body with a Pressure Activated Seal
pressure activated seal that minimizes flow-by Minimizes flow-by during pop-up and keeps
during start-up and keeps debris away during debris away from stem during retraction.
retraction.
Stainless Steel Retraction Spring
This heavy-duty spring ensures positive pop-down.
Easy Grip Top

Unique grip-and-turn adjustment from the top of the
nozzle – wet or dry.
Removable Components
Nozzle, screen and internal components are easily
removed for flushing and servicing.
Compatible With All 570Z Nozzles

Available with pre-installed Toro Variable Arc Nozzles
(TVAN) in five radii or can accept any 570Z nozzle
offering.
Water Management Highlight
Easy Arc Adjustment Means Accurate Watering
TVAN Series nozzles are designed to deliver effective

watering coverage with maximum irrigation efficiency.
Whether a standard size, odd angle or irregularly
shaped area, the TVAN Series is able to meet the
watering requirements with just one nozzle. There is
no need to worry about dry spots on lawns or wasting
water on sidewalks, driveways and other hardscapes.
10
Specifications Optional Check valve
Dimensions The LPS sprinkler series has an optional check valve rated to hold
• Body diameter: 1¼” (32mm) back 7’ (2,1m) of elevation change. This helps to eliminate low
• Cap diameter: 1 5⁄8” (41,3mm) head drainage and keeps the lines charged to lessen water
• Inlet: ½” (12mm) female-threaded hammer potential.
Operating Specifications and Features

• Radius: 2’ – 18’ (0,6-5,5m)
• Operating pressure range: 20-50 psi (1,4-3,5 Bar)
• Recommended pressure for spray nozzles: 30 psi (2,1 Bar)
• Recommended pressure for rotating nozzles: 40-50 psi
(2,8-3,5 Bar)
• Flow by: 0 at 10 psi (0 at 0,7 Bar) or greater
• Infinitely adjustable from 0° to 360°
• Top color-coded nozzles
Options Available
• LPSCV - Check Valve: Maintains up to 7’ (2,1m) elevation
change
Warranty
• Two years
LPS Series Model List

Color-coded
Model Description on top for
easy radius
LPS200 2” (50mm) Pop-up w/o nozzle identification
LPS208 2” (50mm) Pop-up w/TVAN8 installed when installed
LPS210 2” (50mm) Pop-up w/TVAN10 installed
LPS400 4” (100mm) Pop-up w/o nozzle
Specifying Information—LPS Series

LPS X XX CV
Description Body Nozzle Options
LPS X XX CV
LPS—LPS Fixed Spray 2—2” Body (50mm) 00—Body Only 08—8’ (2,4m) 10—10’ (3,0m) CV—Check Valve
4—4” Body (100mm) 12—12’ (3,7m) 15—15’ (4,6m) 17—17’ (5,2m)
Example: A 4" (100mm) Fixed-spray Sprinkler with a 10’ (3,0m) nozzle, would be specified as: LPS410
11
570Z & 570ZLP Series Sprays
• Shrub, 2” (50mm), 3” (75mm), 4” (100mm), 6” (150mm) and 12” (300mm) Pop-up

• Radius: 2’-26’ (0,6m-7,9m)
• Operating Pressure Range (570Z): 20-75 psi (1,4-5,2 Bar)
• Operating Pressure Range (570LP): 15-75 psi (1,0-5,2 Bar)
Versatile. Flexible. Reliable. The Toro® 570Z Features & Benefits

sprinkler embodies all that is required for
residential and service contractors wanting Zero Flush Wiper Seal
to stock just one sprinkler family. Prevents flushing on pop-up, allowing more sprinklers
on the same line.
One-Piece Check Valve

Easily installed at the factory or in the field. Maintains
up to 10’ (3m) elevation change.
Low Pressure or Enhanced Retraction Spring

Choose the spring which best meets your site specific
needs. New to the family is the low pressure 570ZLP
which allows for pop-up and retraction at lower
pressures.
Ratcheting Riser
For easy and reliable arc adjustment on pop-up models.
Small 2” (50mm) Diameter Cap

Less visible, reducing damage from exposure or
vandals.
Effluent Check
Options Valve
Available Options
Available
No Flushing on Pop-Up!
With a pressure-activated wiper seal that flushes only

upon retraction, flow-by is eliminated on pop-up
reducing water waste and allowing more heads per
valve. This zero-flush seal is what makes the 570Z
Series a spray head for those serious about effective
water management.
Enhanced
zero flush seal
12
Specifications
Dimensions
• Body diameter:
– 1 3⁄8” (35mm) on 2P, 3P, 4P, 6P and 6P SI models
– 1 5⁄8” (40mm) on 12P
– 1 ¾” (45mm) on 12P SI
• Cap diameter: 2” (50mm)
• Inlet: ½” (12mm) female-threaded
• Side inlet: 4 ¾” (120mm) from top of sprinkler to center
of side inlet
Operating Specifications
• Radius: 2’-26’ (0,6m-7,9m)
• Operating pressure range (570Z): 20-75 psi (1,4-5,2 Bar)
• Operating pressure range (570ZLP): 15-75 psi (1,0-5,2 Bar)
• Recommended pressure for rotating nozzles:
570LP Series Model List
40-50 psi (2,8-3,5 Bar) Model Description
• Flow rate: 0.05 – 4.5 GPM (0,2-17,0 LPM)
570Z-2LP 570Z, 2” (50mm), Low Pressure
Additional Features 570Z-3LP 570Z, 3” (75mm), Low Pressure
• Stainless steel retraction spring 570Z-4LP 570Z, 4” (100mm), Low Pressure
• Low pressure sealing on LP models at 15 psi (1,0 Bar) for 570Z-6LP 570Z, 6” (150mm), Low Pressure
low pressure pumps and well systems 570Z-6LPSI 570Z, 6” (150mm), Low Pressure, Side Inlet
• All bodies shipped with flush plug in place 570Z-12LP 570Z, 12” (300mm), Low Pressure
570Z-12LPSI 570Z, 12” (300mm), Low Pressure, Side Inlet
Options Available
Note: all w/o Nozzle
• Check Valve (570CV): maintains up to 10’ elevation
change (not for side-inlet models)
• 570SEAL: Serviceable seal for all 570Z models 570Z Series Model List
• Effluent water indicators:
− Effluent Shrub Adapter (102-0563) Model Description
− Effluent Snap-on Cap Cover (89-9752)
570Z-2P 2” (50mm) Sprinkler
− Effluent Molded Cap with seal (102-1211)
• 570-6X: 6” (150mm) Riser Extender
• 570-SR-6: 6” (150mm) Stationary Riser
570Z-4PCOM 4” (100mm) Sprinkler, w/Check Valve
½” (12mm) male-threaded inlet 570Z-6P 6” (150mm) Sprinkler
• 570-SR-18: 18” (450mm) Stationary Riser 570Z-6PSI 6” (150mm) Sprinkler, Side inlet Body
½” (12mm) male-threaded inlet 570Z-6PCOM 6” (150mm) Sprinkler, w/Check Valve
• Riser Pull-up Tool (89-6395) 570Z-12P 12” (300mm) Sprinkler
• Adjustment Key (89-7350) 570Z-12PSI 12” (300mm) Sprinkler, Side inlet Body
Warranty 570Z-12PCOM 12” (300mm) Sprinkler, w/Check Valve
570S Shrub Adapter
• Two years Note: all w/o Nozzle
Specifying Information—570ZLP Series

570X-XXLP-SI-COM-E
Model Pop-up Height Optional Optional Optional
570Z XXLP SI COM E
Z—Lawn Pop-up & High Pop 2LP—2” (50mm) 3LP—3” (75mm) 4LP—4” (100mm) SI—Side Inlet* COM—Check- O- Matic™** E—Effluent
6LP—6” (150mm) 12LP—12” (300mm)
Example: A 570ZLP Series Sprinkler (low pressure) with a pop-up height of 6" (150mm) and a check valve, you would specify: 570Z-6LP COM
Specifying Information—570Z Series

570X-XXP-SI-COM-E
570X XXP SI COM E
S—Shrub 2—2" (50mm) 3—3" (75mm) 4—4" (100mm) SI—Side Inlet* COM—Check- O- Matic™** E—Effluent
Z—Lawn Pop-up & High Pop 6—6" (150mm) 12—12" (300mm)
Example: A 570Z Series Sprinkler with a pop-up height of 6" (150mm) and a check valve, you would specify: 570Z-6P COM
*Available for 6" (150mm) and 12" (300mm) models.
**Available with non-side inlet models except 2" (50mm) and 3" (75mm).
13
570ZXF Series Sprays
• Shrub, 4” (100mm), 6” (150mm) and 12” (300mm) Pop-up
• Radius: 2’-26’ (0,6m-7,9m)
Convenient and versatile. The Toro® 570ZXF Features & Benefits

sprinkler has all the versatility and features of the
570Z with the added value of Toro’s patented Patented X-flow® Water Shut-off Device
X-Flow® technology. Built into the riser and restricts water loss by 99% if the
nozzle is removed or damaged, eliminating potential
erosion or safety concerns. Allows for “dry” nozzle and
filter-replacement or maintenance, while the system
is running.
Zero Flush Wiper Seal

Prevents flushing on pop-up, allowing more sprinklers
on the same line.
Enhanced Retraction Spring and Wiper Seal

Robust retraction spring and enhanced seal material
ensures positive pop-up and retraction on all 570Z
models.
One-Piece Check Valve

Easily installed at the factory or in the field. Maintains
up to 10’ (3m) elevation change.
Ratcheting Riser

vandals.
Effluent Check
Options Valve
Available Options
Available
X-Flow Technology Shuts Off Water Waste
A missing or damaged spray head nozzle can let up to 40

gallons of water escape per minute. The patented X-Flow
technology is a shut-off device built right into the sprinkler.
When accidents or vandalism occur the 570ZXF is there to
reduce liability and minimize water waste.
Patented X-Flow®
Shut-off Device
14
Specifications Without X-Flow
Dimensions
• Body diameter:
– 1 3⁄8” (35mm) on 4P, 6P and 6P SI models
– 1 5⁄8” (41mm) on 12P
– 1 ¾” (44,5mm) on 12P SI
• Cap diameter: 2” (50mm)
• Inlet: ½” female-threaded
• Side inlet: 4¾” (120,7mm) from top of sprinkler to center
of side inlet
• Radius: 2’-26’ (0,6m-7,4m)
• Operating pressure range: 20-75 psi (1,4-5,2 Bar) With X-Flow
• Recommended pressure for rotating nozzles:
40-50 psi (2,8-3,5 Bar)
• Flow rate: 0.05 – 4.5 GPM (0,2-17,0 LPM)
Additional Features
• Stainless steel retraction spring
• All bodies shipped with flush plug in place
Options Available
• Check Valve (570CV): maintains up to 10’ (3m) elevation
change (on non-side-inlet models)
• 570SEAL: Serviceable seal for all 570Z models
– Effluent Snap-on Cap Cover (89-9752)
– Effluent Molded Cap with seal (102-1211)
• Riser Pull-up Tool (89-6395)
• Adjustment Key (89-7350) 570ZXF allows for dry nozzle installations and change outs
Warranty 570ZXF Series Model List

• Two years Model Description
570S-XF Shrub Sprinkler, w/Shut-off
570Z-4P XF 4” (100mm) Sprinkler, w/Shut-off
570Z-4P XF COM 4” (100mm) Sprinkler, w/Check Valve and
Shut-off
570Z-6P XF SI 6” (150mm) Sprinkler, Side-inlet Body, w/
Shut-off
570Z-6P XF COM 6” (150mm) Sprinkler, w/Check Valve and
Shut-off
570Z-12P XF SI 12” (300mm) Sprinkler, Side-inlet Body,
w/Shut-off
570Z-12P XF COM 12” (300mm) Sprinkler, w/Check Valve
and Shut-off
Specifying Information—570ZXF Series

570Z-XXP-SI-XF-COM-E
570X XXP SI COM E
S—Shrub 4—4" (100mm) SI—Side Inlet* COM—Check O-Matic** E—Effluent
Z—Lawn Pop-up & High-pop 6—6" (150mm)
12—12" (300mm)
Example: A 570Z XF Series Sprinkler with a pop-up height of 6" (150mm) and a check valve would be specified as: 570Z-6P XF COM
*Available for 6” (150mm) and 12” (300mm) models.
**Available with non-side inlet models.
15
570ZPR & 570ZPRX Series Sprays
• Shrub, 4” (100mm), 6” (150mm) and 12” (300mm) Pop-up
• Radius: 2’-17’ (0,6-5,2m)
Built-in pressure regulation. The Toro® 570ZPR Features & Benefits

and 570ZPRX feature a patented in-riser pressure
regulator, bringing another superior feature to Patented In-riser Pressure Regulator
the 570Z series. The 570Z PRX sprinkler also Maintains constant 30 psi (2,1 Bar) psi outlet pressure,
which minimizes misting and fogging caused by
includes the X-Flow® technology combined
pressures above 30 psi (2,1 Bar).
in a single riser providing unmatched water
management.
Zero Flush Wiper Seal
Prevents flushing on pop-up, allowing more sprinklers
on the same line.
Enhanced Retraction Spring and Wiper Seal

Robust retraction spring and enhanced seal material
ensures positive pop-up and retraction on all 570Z
models.
Ratcheting Riser

vandals.
AND FOR 570ZPRX MODELS:
Patented X-flow® Water Shut-off Device

• Built into the riser and restricts water loss by 99% if
the nozzle is removed or damaged, eliminating
potential erosion or safety concerns.
• Allows for “dry” nozzle and filter-replacement or
maintenance, while the system is running.
Check
Valve
Effluent Options
Options Available
Available Without Pressure
Regulation
570ZPRX: For Those Serious About Water Management

By combining the patented X-Flow and pressure-regulation
technologies into one riser, the 570PRX stabilizes the
performance of the system at 30 psi (2,1 Bar) from the first
head to the last ensuring optimum nozzle performance.
With Pressure
Regulation
16
Specifications 570ZPR Series Model List
Dimensions Model Description
• Body diameter: All Models Include Patented In-Riser Pressure Regulator

– 1 3⁄8” (35mm) on 4P, 6P and 6P SI models 570Z-4P PR 4” (100mm) Sprinkler
– 1 5⁄8” (40mm) on 12P 570Z-4P PR COM 4” (100mm) Sprinkler, w/Check Valve
– 1 ¾” (45mm) on 12P SI 570Z-4P PR COM E 4” (100mm) Sprinkler, w/Check Valve,
• Cap diameter: 2” (50mm) and Effluent
• Inlet: ½” (13mm) female-threaded 570Z-6P PR 6” (150mm) Sprinkler
• Side inlet: 4 ¾”(120mm) from top of sprinkler to center 570Z-6P PR COM 6” (150mm) Sprinkler, w/Check Valve
of side inlet 570Z-6P PR COM E 6” (150mm) Sprinkler, w/Check Valve
Operating Specifications and Effluent
570Z-12P PR 12” (300mm) Sprinkler
• Radius: 2’-17’ (0,6-5,2m) 570Z-12P PR COM 12” (300mm) Sprinkler, w/Check Valve
• Operating pressure range: 20-75 psi (1,4-5,2 Bar) 570Z-12P PR COM E 12” (300mm) Sprinkler, w/Check
• Recommended pressure for spray models: 30 psi (2,1 Bar) Valve and Effluent
• Note: Precision™ Series Rotating Nozzle radius is 17’ 570S-PR Shrub
(5,2m) with 570ZPR and 570ZPRX due to constant 30 psi 570S-PRE Shrub and Effluent
(2,1 Bar) outlet pressures. For longer distances, use 570Z Note: all w/o Nozzle
COM or 570ZXF COM
• Flow rate: 0.05 – 3.45 GPM (0,2-13,0 LPM)
Additional Features
• Stainless steel retraction spring
• All bodies shipped with flush plug in place 570ZPRX Series Model List
Options Available Model Description
• Check Valve (570CV): maintains up to 10’ (3,0) elevation All Models Include Pressure Regulation and X-Flow® Shut-off
change (on non-side-inlet models)
570S-PRX Shrub Sprinkler
• 570SEAL:Serviceable seal for all 570Z models
570Z-4P PRX 4” (100mm) Sprinkler
– Effluent Snap-on Cap Cover (89-9752)
570Z-6P SI PRX 6” (150mm) Sprinkler, Side-inlet Body
– Effluent Molded Cap with seal (102-1211)
• 5706X: 6” (150mm) Riser Extender (35-2636)
570Z-12P SI PRX 12” (300mm) Sprinkler, Side-inlet Body
• Riser Pull-up Tool (89-6395)
• Adjustment Key (89-7350) With Check Valve added
Warranty 570Z-4P PRX COM 4” (100mm) Sprinkler
570Z-6P PRX COM 6” (150mm) Sprinkler
• Five years 570Z-12P PRX COM 12” (300mm) Sprinkler
With Effluent Molded Cap added
570Z-4P PRX E 4” (100mm) Sprinkler
570Z-4P PRX COM E 4” (100mm) Sprinkler, w/Check Valve
Specifying Information—570ZPR & 570ZPRX Series

570X-XXP-SI-PRX-COM-E
Model Pop-up Height Optional X-flow Optional Optional
570X XXP SI PRX COM E
S—Shrub 4—4” (100mm) SI—Side Inlet* PR—Pressure Regulation Only COM—Check Valve** E—Effluent
Z—Lawn Pop-up & High-pop 6—6” (150mm) PRX—Pressure Regulation With X-flow™
12—12” (300mm)
Example: A 570Z PR Series Sprinkler with a pop-up height of 6” (150mm) with a side-inlet option, would be specified as: 570Z-6P SI PR
Example: A 570Z PRX Series Sprinkler with a pop-up height of 6" (150mm) with a side-inlet option, would be specified as: 570Z-6P SI PRX
*Available for 6” (150mm) and 12” (300mm) models.
**Available with non-side inlet models.
PRX models not recommended for use with PCD nozzles.
17
Precision™ Series Spray Nozzles
• Radius: 5’-15’ (1,5-4,6m)
• Arc Options: 60°, 90°, 120°, 150°, 180°, 210°, 240°, 270°, 360°
• Side & Corner Specialty Patterns
• Fit Toro® or Irritrol®, Rain Bird® and Hunter® Spray Bodies
Toro’s new Precision Series Spray Nozzles are Features & Benefits
the most complete and efficient spray nozzle
line available to help irrigation professionals Patented H²0 Chip Technology
manage water use, eliminate runoff and reduce Using patented H²0 chip technology – and no moving
customer water bills. parts – each Precision Series Spray nozzles creates one
or more high frequency oscillating streams to achieve
the desired arc and radius with 1/3 less water usage.
Maximize Irrigation Efficiency

Male- or Female-threaded Nozzles
Precision Spray nozzles deliver an industry first 1”/hr
(25mm/hr) precipitation rate, which better matches
soil infiltration rate. This lower precipitation rate, along
with high distribution uniformity make this nozzles
family the most efficient nozzle from 5’-15’ (1,5-4,6m).
Design and Retrofit Effectiveness

The lower flow rate of Precision Series spray nozzles
maximizes design efficiency and saves on overall
material costs by using fewer valves and less controller
5’ (1,5m) stations. In addition, existing systems with low pressure
can be fixed with a simple retrofit of the existing high-
8’ (2,4m)
flow nozzle.
10’ (3,0m)
Third-Party Performance Validation
Precision Series Spray nozzles have been tested and
validated in the field and at the Center for Irrigation
Technology (CIT).
12’ (3,7m)
15’ (4,6m )
Specialty Arcs
High Irrigation Efficiency with 1”/hr. (25mm/hr.)

Matched Precipitation Rate
Precision™ Series Spray Nozzles tested higher than competitive
water conserving nozzles in multiple independent third party
studies for irrigation efficiency. The 1”/hr. (25mm/hr.) precipitation
rate ensures irrigation runtimes can be achieved even with tight
watering windows.
18
Specifications Precision Series Nozzle Model List
Operating Specifications 5’ “O” Nozzle (Red) 8’ “O” Nozzle (Green)

Male Female Descrip. Male Female Descrip.
• Radius: 5’-15’ (1,5-4,6m)
O-T-5-60 O-5-60 60° Arc O-T-8-60 O-8-60 60° Arc
O-T-5-Q O-5-Q 90° Arc O-T-8-Q O-8-Q 90° Arc
• Recommended Pressure: 30 psi (2,1 Bar) O-T-5-T O-5-T 120° Arc O-T-8-T O-8-T 120° Arc
• Flow Rate: 0.04-2.4 GPM (0,1-9,4 LPM) O-T-5-150 O-5-150 150° Arc O-T-8-150 O-8-150 150° Arc
• Nozzle trajectory: O-T-5-H O-5-H 180° Arc O-T-8-H O-8-H 180° Arc
- 5’: 5° O-T-5-210 O-5-210 210° Arc O-T-8-210 O-8-210 210° Arc
- 8’: 10° O-T-5-TT O-5-TT 240° Arc O-T-8-TT O-8-TT 240° Arc
- 10’: 15° O-T-5-TQ O-5-TQ 270° Arc O-T-8-TQ O-8-TQ 270° Arc
- 12’: 20° O-T-5-F O-5-F 360° Arc O-T-8-F O-8-F 360° Arc
- 15’: 27° 10’ “O” Nozzle (Blue) 12’ “O” Nozzle (Brown)
- Corner and Side Strips: 20° O-T-10-60 O-10-60 60° Arc O-T-12-60 O-12-60 60° Arc
O-T-10-Q O-10-Q 90° Arc O-T-12-Q O-12-Q 90° Arc
Additional Features
O-T-10-T O-10-T 120° Arc O-T-12-T O-12-T 120° Arc
• Specialty Arcs available (60°, 120°, 150°, 210°, 240°) O-T-10-150 O-10-150 150° Arc O-T-12-150 O-12-150 150° Arc
• Radius reduction 25% maximum O-T-10-H O-10-H 180° Arc O-T-12-H O-12-H 180° Arc
• Color coded for radius on top of the nozzle O-T-10-210 O-10-210 210° Arc O-T-12-210 O-12-210 210° Arc
• Precipitation rate ≤ 1”/hour (≤ 25mm/hour) O-T-10-TT O-10-TT 240° Arc O-T-12-TT O-12-TT 240° Arc
O-T-10-TQ O-10-TQ 270° Arc O-T-12-TQ O-12-TQ 270° Arc
• Maintains precipitation rate as radius is reduced up to
O-T-10-F O-10-F 360° Arc O-T-12-F O-12-F 360° Arc
max of 25%
• Matched precipitation rate within radius families 15’ “O” Nozzle (Black) Special Patterns (Grey)
• Matched precipitation rates between radius families O-T-15-60 O-15-60 60° Arc Male Female
• Screen attached to nozzle for easy insertion into the O-T-15-Q O-15-Q 90° Arc
O-T-15-T O-15-T 120° Arc O-T-4X9-RCS O-4X9-RCS Right Corner
spray body Left Corner
O-T-15-150 O-15-150 150° Arc O-T-4X9-LCS O-4X9-LCS
• Works on all spray bodies O-T-4X18-SST O-4X18-SST Side Strip
O-T-15-H O-15-H 180° Arc
Warranty O-T-15-210 O-15-210 210° Arc O-T-4X15-RCS O-4X15-RCS Right Corner
O-T-15-TT O-15-TT 240° Arc O-T-4X15-LCS O-4X15-LCS Left Corner
• Two years O-T-15-TQ O-15-TQ 270° Arc O-T-4X30-SST O-4X30-SST Side Strip
O-T-15-F O-15-F 360° Arc
(1,5m)
(2,4m) (1,2m X 4,6m) (1,2m X 9,1m) (1,2m X 4,6m)
(3,0m) (1,2m X 2,7m) (1,2m X 5,5m) (1,2m X 2,7m)
(3,7m)
(4,6m)
Specifying Information
O-X-XXXX-XXX
Nozzle Thread Radius Arc Body
O X XXXX XXX
O—1” Per T—Toro Male Threaded Nozzle 5—5’ (1,5m) 8—8’ (2,4m) 10—10’ (3,0m) 60—60° Q—90° T—120° Call out body as
Hour Blank—Female Threaded Nozzle 12— 12’ (3,7m) 15—15’ (4,6m) 150—150° H—180° 210—210° required
(4X15—4’X15’* (1,2mX4,6m) TT—240° TQ—270°
4X30—4’X30’* (1,2mX9,1m) F-360—Full-circle
4X9—4’X9’ (1,2mX2,7m) LCS—Left Corner
4X18—4’X18’ (1,2mX5,5m) RCS—Right Corner
SST—Side Strip*
Example: A female threaded Precision Series Spray with a spray radius of 12’ (3,7m) and a 90° arc would be specified as: O-12-Q
Example 2: A male threaded Precision Series Spray with a spray radius of 10’ (3,0m) and a 180° arc would be specified as: O-T-10-H
19
Precision™ Series Spray Nozzles
The Patented H²O Chip
No Moving or Sonic Welded Parts
Assures no variation at the end of the water arc for better Water expands and collapses inside the H²0 Chip created high-
edge definition and consistent, reliable performance. frequency oscillating streams which allow for distance of throw
using 1/3 less flow.
Uniform Droplet Size
The H²O Chip generates a larger, more uniform droplet size

resulting in consistency across the irrigated arc, increased
wind resistance and less unintentional watering of hardscape
features and run-off.
Matched Precipitation Rate Pre-Attached Filter Screen

Even after 25% Radius Reduction For Installation Convenience
The stainless steel radius Filter Screen is pre-attached

reduction screw can to the nozzle to ensure
reduce the radius down timely installations and
25% without affecting retrofits. There are three
precipitation rate…an different sizes of mesh
industry first for spray filters to prevent debris
nozzles! from clogging the head.
20
Performance Data Precision™ Series Spray Nozzles—US
Precip.Rate Precip. Rate Precip.Rate Precip. Rate Precip.Rate Precip. Rate
Arc PSI GPM Radius Arc PSI GPM Radius Arc PSI GPM Radius
 (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)
20 0.04 4.7 0.99 1.15 20 0.10 7.6 1.0 1.2 20 0.16 9.5 1.0 1.2
5-60° 8-60° 10-60°
30 0.04 5.0 0.99 1.15 30 0.11 8.0 1.0 1.1 30 0.17 10.0 1.0 1.1
40 0.04 5.0 0.99 1.15 40 0.12 8.1 1.1 1.2 40 0.18 10.0 1.0 1.2
50 0.05 5.3 0.99 1.14 50 0.13 8.3 1.1 1.3 50 0.19 10.0 1.1 1.3
20 0.06 4.6 1.02 1.18 20 0.14 7.0 1.1 1.3 20 0.26 9.5 1.0 1.1
5Q 8Q 10Q
30 0.06 5.0 0.99 1.14 30 0.17 8.0 1.0 1.1 30 0.23 10.0 1.0 1.2
40 0.07 5.0 1.00 1.16 40 0.18 8.2 1.0 1.2 40 0.28 10.2 1.0 1.2
50 0.07 5.0 1.02 1.17 50 0.18 8.4 1.0 1.1 50 0.28 10.3 1.0 1.2
20 0.07 4.4 1.01 1.17 20 0.20 7.6 1.0 1.2 20 0.31 9.5 1.0 1.1
5T 8T 10T
30 0.09 5.0 1.04 1.20 30 0.22 8.0 1.0 1.1 30 0.34 10.0 1.0 1.1
40 0.09 5.2 0.99 1.15 40 0.23 8.2 1.0 1.1 40 0.36 10.0 1.0 1.2
50 0.10 5.4 0.98 1.13 50 0.24 8.3 1.0 1.1 50 0.37 10.0 1.1 1.2
20 0.07 4.0 1.02 1.18 20 0.25 7.5 1.0 1.2 10- 20 0.41 9.8 1.0 1.1
5-150° 30 0.11 5.0 1.03 1.19 8-150° 30 0.27 8.0 1.0 1.1 150° 30 0.43 10.0 1.0 1.1
40 0.12 5.2 1.04 1.20 40 0.28 8.1 1.0 1.1 40 0.44 10.2 1.0 1.1
50 0.13 5.4 1.04 1.20 50 0.29 8.2 1.0 1.2 50 0.46 10.4 1.0 1.1
20 0.10 4.4 0.99 1.15 20 0.26 7.0 1.0 1.2 20 0.48 9.7 1.0 1.1
5H 30 0.13 5.0 1.00 1.16 8H 30 0.33 8.0 1.0 1.1 10H 30 0.51 10.0 1.0 1.1
40 0.14 5.1 1.00 1.15 40 0.34 8.0 1.0 1.2 40 0.55 10.3 1.0 1.2
50 0.14 5.2 0.99 1.14 50 0.34 8.0 1.0 1.2 50 0.56 10.4 1.0 1.2
20 0.10 4.4 0.99 1.15 20 0.33 7.6 1.1 1.3 10- 20 0.56 9.8 1.1 1.3
5-210° 8-210°
30 0.15 5.2 1.07 1.23 30 0.36 8.0 1.1 1.3 210° 30 0.58 10.0 1.1 1.3
40 0.16 5.3 1.10 1.27 40 0.37 8.1 1.1 1.3 40 0.60 10.4 1.1 1.2
50 0.17 5.5 1.08 1.25 50 0.38 8.2 1.1 1.3 50 0.62 10.5 1.1 1.3
20 0.14 4.3 1.09 1.26 20 0.34 7.0 1.0 1.2 20 0.63 9.6 1.0 1.1
5TT 8TT 10TT
30 0.17 5.0 0.98 1.13 30 0.44 8.0 1.0 1.1 30 0.69 10.0 1.0 1.2
40 0.19 5.0 1.07 1.23 40 0.46 8.0 1.0 1.2 40 0.73 10.3 1.0 1.1
50 0.19 5.0 1.09 1.25 50 0.46 8.0 1.0 1.2 50 0.74 10.4 1.0 1.1
5TQ 20 0.15 4.3 1.02 1.17 8TQ 20 0.41 7.2 1.0 1.1 10TQ 20 0.71 9.5 1.0 1.1
30 0.20 5.0 1.00 1.16 30 0.49 8.0 1.1 1.1 30 0.79 10.0 1.0 1.1
40 0.21 5.0 1.05 1.21 40 0.54 8.0 1.1 1.2 40 0.84 10.3 1.0 1.1
50 0.22 5.0 1.10 1.27 50 0.55 8.0 1.1 1.2 50 0.86 10.4 1.0 1.1
5F 20 0.17 4.0 1.02 1.18 8F 20 0.55 7.0 1.1 1.2 10F 20 0.95 9.6 1.0 1.1
30 0.26 5.0 1.00 1.16 30 0.66 8.0 1.0 1.1 30 1.03 10.0 1.0 1.1
40 0.26 5.0 1.00 1.16 40 0.68 8.0 1.0 1.2 40 1.08 10.3 1.0 1.1
50 0.26 5.0 1.00 1.16 50 0.71 8.0 1.1 1.2 50 1.12 10.4 1.0 1.2
Arc PSI GPM Radius Arc PSI GPM Radius Arc PSI GPM Radius
 (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)  (in./hr.)
20 0.24 11.5 1.0 1.2 20 0.35 14.0 1.0 1.2 4X30 20 0.62 4x28 1.0 1.1
12-60° 15-60°
30 0.25 12.0 1.0 1.2 30 0.39 15.0 1.0 1.2 SST 30 0.66 4x30 1.1 1.2
40 0.26 12.1 1.0 1.2 40 0.40 15.1 1.0 1.2 40 0.67 4x30 1.1 1.2
50 0.28 12.2 1.1 1.3 50 0.42 15.3 1.0 1.2 50 0.68 4x30 1.1 1.3
20 0.34 12.0 1.0 1.2 20 0.53 14.2 1.0 1.2 4X15 20 0.32 4x15 1.0 1.2
12Q 15Q
30 0.37 12.1 1.0 1.1 30 0.58 15.0 1.0 1.1 LCS 30 0.33 4x15 1.1 1.2
40 0.39 11.4 1.0 1.2 40 0.60 15.1 1.0 1.2 40 0.34 4x15 1.1 1.3
50 0.39 12.0 1.0 1.1 50 0.61 15.3 1.0 1.2 50 0.34 4x15 1.1 1.3
20 0.46 11.5 1.0 1.2 20 0.72 14.3 1.0 1.2 4X15 20 0.32 4x15 1.0 1.2
12T 30 15T
0.49 12.0 1.0 1.1 30 0.77 15.0 1.0 1.1 RCS 30 0.33 4x15 1.1 1.2
40 0.51 12.2 1.0 1.1 40 0.81 15.3 1.0 1.2 40 0.34 4x15 1.1 1.3
50 0.52 12.3 1.0 1.1 50 0.82 15.4 1.0 1.2 50 0.34 4x15 1.1 1.3
12- 20 0.60 11.6 1.0 1.2 15- 20 0.92 14.7 1.0 1.2 4X18 20 0.36 4X18 1.0 1.1
150° 30 0.62 12.0 1.0 1.2 150° 30 0.96 15.0 1.0 1.2 SST 30 0.37 4X18 1.0 1.1
40 0.63 12.2 1.0 1.1 40 1.00 15.2 1.0 1.2 40 0.38 4X18 1.0 1.2
50 0.64 12.3 1.0 1.1 50 1.10 15.3 1.1 1.3 50 0.38 4X18 1.0 1.2
20 0.70 11.5 1.0 1.2 20 1.10 14.5 1.0 1.2 4X9 20 0.18 4X9 1.0 1.1
12H 30 0.74 12.0 1.0 1.1 15H 30 1.16 15.0 1.0 1.1 LCS 30 0.19 4X9 1.0 1.2
40 0.79 12.3 1.0 1.2 40 1.25 15.4 1.0 1.2 40 0.20 4X9 1.1 1.2
50 0.80 12.4 1.0 1.2 50 1.28 15.5 1.0 1.2 50 0.20 4X9 1.1 1.1
12- 20 0.76 11.6 1.1 1.3 15- 20 1.15 14.5 1.1 1.2 4X9 20 0.18 4X9 1.0 1.2
210° 30 0.82 12.0 1.1 1.3 210° 30 1.20 15.0 1.0 1.2 RCS 30 0.19 4X9 1.0 1.2
40 0.84 12.3 1.1 1.2 40 1.30 15.5 1.0 1.2 40 0.20 4X9 1.1 1.2
50 0.85 12.4 1.1 1.2 50 1.40 15.6 1.1 1.3 50 0.20 4X9 1.1 1.2
20 0.90 11.4 1.0 1.2 20 1.45 14.5 1.0 1.2
12TT 15TT
30 0.99 12.0 1.0 1.1 30 1.54 15.0 1.0 1.1
40 1.04 12.3 1.0 1.1 40 1.58 15.2 1.0 1.1
50 1.05 12.4 1.0 1.1 50 1.61 15.3 1.0 1.1
12TQ 20 1.05 11.4 1.0 1.2 15TQ 20 1.72 14.5 1.0 1.2
30 1.15 12.0 1.0 1.2 30 1.78 15.0 1.0 1.1
40 1.19 12.2 1.0 1.2 40 1.82 15.0 1.0 1.2
50 1.22 12.3 1.0 1.2 50 1.90 15.3 1.0 1.2
12F 20 1.35 11.5 1.0 1.1 15F 20 2.20 14.5 1.0 1.2
30 1.48 12.0 1.0 1.1 30 2.31 15.0 1.0 1.1
40 1.59 12.4 1.0 1.1 40 2.35 15.2 1.0 1.1
50 1.60 12.5 1.0 1.1 50 2.40 15.3 1.0 1.1
21
Precision™ Series Rotating Nozzles
• Radius: 14’-26’ (4,3-8,0m)
• 45°-360° Arc Settings
• Fit Toro® or Irritrol®, Rain Bird® and Hunter® Spray Bodies
Based off the design of the world’s leading gear- Features & Benefits
driven rotor for golf applications, the Precision
Series Rotating Nozzle is powered by a proven Gear-Driven
gear drive and delivers wind resistant, multi- Utilizes a proven planetary gear drive, variable stator
and turbine to rotate the nozzle.
stream, multi-trajectory patterns.
Female-threaded Male-threaded Fewer Models

PRN-A PRN-TA Only two male-threaded nozzles and two female-
threaded nozzles are required to cover radius range
from 14-26 feet (4,3m-8,0m) and arc range from
45-360°.
Matched Precipitation Rate

of 0.55”/hr. (14 mm/hr.)
These nozzles deliver water more slowly and evenly
than standard spray nozzles. The precipitation rate of
0.55”/hr. (14 mm/hr.) helps prevent excess run times
often set to stay within watering windows.
Consistent Speed of Rotation

Female-threaded Male-threaded The gear drive mechanism delivers a consistent speed
PRN-F PRN-TF of rotation regardless of system pressure and prevents
product stalling at low pressure.
Adjustment
Tool
Step-Up™ Technology
Steps
Steps
Step-Up™ Technology is designed to deliver high
Precision Series Rotating Nozzles supply matched uniformity with matched precipitation for in-close
precipitation with any arc and any radius from 14 to 26 watering all the way out to the furthest radius point.
feet (4,3m-8,0m). Water is applied slowly and evenly to The unique “steps” create 15 streams, each designed
reduce runoff and wasted water. to cover an area of the pattern.
22
Specifications Precision™ Series Rotating Nozzle
Operating Specifications Visual Arc Adjustment
• Radius: 14’-26’ (4,3-7,9m)
• Operating pressure range: 20-75 psi (1,4-5,2 Bar) 180°
• Recommended Pressure: 40-50 psi (2,8-3,5 Bar) working
• Flow Rate: 0.17-3.68 GPM (1,4-14 LPM) pattern
Additional Features
Right
• 15 unique streams with different trajectories edge
• Maximum height of 20° trajectory to fight through wind
• Threads onto nearly all sprayheads and shrub adapters
(male or female)
• Pre-attached screen for easy installation
• Radius reduction up to 25% by turning set screw 90° The unique adjustment method allows for pre-setting of arc by
• Color coded to identify adjustable or full circle hand or tool before the nozzle is installed. Visual indicators allow
• Precipitation rate = 0.55”/hr. (14 mm/hr.) on square the user to quickly adjust the arc pattern to the desired arc from
spacing plans 45-270°. The adjustment band can be adjusted by hand or with the
• Maintains precipitation rate as radius is reduced pre-included tool.
• Matched precipitation from 14-26 feet (4,3-7,9m)
• Matched precipitation from 20-75 psi (1,4-5,2 Bar)
• Adjustable by hand or with included tool
Performance Data—Precision™ Series Rotating Nozzles—US
• Consistent speed of rotation not affected by pressure
Precip.Rate Precip. Rate
Arc PSI GPM Radius
Warranty  (in./hr.)  (in./hr.)
20 0.17 14.0 0.67 0.77
• Five years 30 0.19 15.0 0.65 0.75
40 0.25 17.0 0.67 0.77
45° 50 0.31 18.5 0.70 0.81
60 0.35 19.5 0.71 0.82
75 0.43 22.0 0.68 0.79
20 0.43 16.0 0.65 0.75
30 0.49 17.5 0.62 0.71
40 0.62 20.5 0.57 0.66
90° 50 0.75 22.5 0.57 0.66
60 0.82 23.5 0.57 0.66
75 0.92 25.0 0.57 0.65
20 0.48 16.4 0.69 0.79
30 0.57 17.5 0.72 0.83
40 0.78 20.2 0.55 0.64
Precision Series Rotating Nozzle Model List 120° 50 0.97 22.5 0.55 0.64
60 1.07 23.5 0.56 0.65
Male Threaded Description 75 1.18 25.0 0.55 0.63
20 0.83 15.0 0.71 0.82
• PRN-TA Toro Threaded, 14-26 feet (4,3-7,9m), 30 0.94 17.0 0.63 0.72
Adjustable from 45°-270° 180°
40 1.22 20.5 0.56 0.65
50 1.46 22.5 0.56 0.64
• PRN-TF Toro Threaded, 14-26 feet (4,3-7,9m), 60 1.61 24.0 0.54 0.62
Full-Circle 75 1.81 26.0 0.52 0.60
20 1.12 15.0 0.72 0.83
Female Threaded Description 30 1.27 17.0 0.63 0.73
40 1.56 20.0 0.56 0.65
• PRN-A Threaded, 14-26 feet (4,3-7,9m), 240° 50 1.80 21.5 0.56 0.65
60 1.95 22.5 0.56 0.64
Adjustable from 45°-270° 75 2.20 24.0 0.55 0.64
• PRN-F Threaded, 14-26 feet (4,3-7,9m), 20 1.08 14.0 0.71 0.81
Full-Circle 30 1.23 16.0 0.62 0.71
40 1.62 19.0 0.57 0.66
270° 50 2.00 21.5 0.55 0.64
60 2.26 23.0 0.55 0.63
75 2.60 25.0 0.53 0.61
20 1.81 15.0 0.77 0.89
30 2.00 17.2 0.65 0.75
40 2.56 20.9 0.56 0.65
360° 50 3.09 22.9 0.57 0.65
60 3.34 23.8 0.57 0.66
75 3.68 25.6 0.54 0.62
Nozzle data subject to change.
Specifying Information—Precision Series Rotating Nozzle

PRN-XX
Model Thread Model
PRN X X
PRN—Precision Rotating Nozzle T—Male Thread A—Adjustable arc
Blank—Female Thread F— Full-circle
Example: A male threaded Precision Series Rotating nozzle with a 24’ (7,31m) radius and a 180° arc would be specified as: PRN-TA
A female threaded Precision Series Rotating nozzle with a 20’ (6,1)radius and 360° arc would be specified as: PRN-F
23
MPR Plus Spray Nozzles
• Radius: 5’-15’ (1,5-4,6m) • Side & Corner Specialty Patterns
• Operating Pressure Range: 20-75 psi • Arc Options: 90°, 120°, 180°, 240°, 270°, 360°
(1,4-5,2 Bar) • Fit Toro® Spray Bodies
• Matched Precipitation
Features & Benefits
MPR Nozzles make design and installation
easier than ever. Just pick your spacing Matched Precipitation Rates
and choose your arc - the nozzle does Ensure all nozzles (every arc within a family) apply water at
approximately the same rate.
everything else.
Low Flow Rates
Allow for more sprinklers to be placed on the same zone.
Pre-installed Pressure Compensation Device (PCD)

Eliminate fogging, conserve water and provide precise flow
rates (also available without PC Devices).
Complete Selection Of Arcs

Arcs for all radius options – full, 3/4, 2/3, 1/2, 1/3 and 1/4.
Specifications
• Recommended pressure: 30 psi (2,1 Bar)
MPR Plus Spray Nozzle Series Model List • Flow Rate: 0.05 – 4.58 GPM (0,2-17,3 LPM)
Model Description Model Description • Nozzle trajectory:
5’ (1,5m) MPR Plus Nozzle 8’ (2,4m) MPR Plus Nozzle - 5’: 5° - 8’: 10° - 10’: 17° - 12’: 24° - 15’: 28°
Red Green - Corner and Side Strips: 17°
5Q 90° Arc 8Q 90° Arc - 8’ Flat Spray: 0°
5T 120° Arc 8T 120° Arc
5H 180° Arc 8H 180° Arc Additional Features
5TT 240° Arc 8TT 240° Arc • Standard and special spray patterns
5TQ 270° Arc 8TQ 270° Arc
• Customized screens for each nozzle
5F 360° Arc 8F 360° Arc
• Patterns for small areas: full set of arcs for 10’, 8’ and 5’ (3,0m,
8’ (2,4m) Flat Spray 10’ (3,0m) MPR Plus Nozzle 2,4m, and 1,5m) radius nozzles
Black Blue • 4’ x 18’ (1,2-5,2m) side strip ideal for medians
FSQ 90° Arc 10Q 90° Arc • 2’ x 6’ (0,6-1,8m) for small planter beds and other narrow areas
FSH 180° Arc 10T 120° Arc • Fine-mesh snap-in filter screens for lower flow nozzles
FSF 360° Arc 10H 180° Arc
• Five levels of trajectory
FSQ-LG 90° Arc, Low GPM 10TT 240° Arc
FSH-LG 180° Arc, Low GPM 10TQ 270° Arc
• Convenient nozzle packaging – nozzles and
FSF-LG 360° Arc, Low GPM 10F 360° Arc screens packed separately
• Adjustment screw allows up to 25% reduction in
12’ (3,7m) MPR Plus Nozzle Special Patterns radius and complete shutoff
Brown Orange
12Q 90° Arc 4SST Side Strip 4’x30’ Warranty
12T 120° Arc (1,2-9,1m) • Two years
12H 180° Arc 4EST End Strip 4’x15’
12TT 240° Arc (1,2-4,3m)
12TQ 270° Arc 4CST Center Strip 4’x30’ Specifying Information—MPR Plus
12F 360° Arc (1,2-6,1m) XX-XXX-PC
15’ (4,6m) MPR Plus Nozzle 9SST Side Strip 9’x18’ Radius Arc Optional
(2,7-5,2m)
Black 4SSST Side Strip 4’x18’ XX XXX PC
15Q 90° Arc (1,2-5,2m) 5—5’ (1,5m) Q—90° T—120° H—180° PC—Pressure
15T 120° Arc 2SST Side Strip 2’ x 6’ 8—8' (2,4m) TT—240° Q—270° F—360° Compensation
15H 180° Arc (0,6-1,8m)
10—10' (3,0m) EST—End Strip
15TT 240° Arc 12—12' (3,7m) CST—Center Strip
15TQ 270° Arc 15—15' (4,6m) SST—Side Strip
15F 360° Arc Example: A 570 MPR Plus Nozzle with a spray of 10' (3,0m), 180° arc and
pressure compensation, would be specified as: 10-H-PC
(Note: All above also available in Pressure Compensating (PC) Models
Note: To specify a MPR Plus nozzle with a 570Z sprinkler body, attach the body
specification before the above nozzle specification.
Note: Do not use PCDs with 570Z PR & 570Z PRX models
24
Performance Data-MPR Plus Spray Nozzles—US
5' Series with 5° Trajectory—Red 8' Series with 10° Trajectory —Green 10' Series with 17° Trajectory—Blue
Prec. Rate Prec. Rate Prec. Rate
Arc Desc. psi GPM Radius Arc Desc. psi GPM Radius Arc Desc. psi GPM Radius
     
20 0.05 4 1.40 1.21 20 0.17 7 1.55 1.34 20 0.30 9 1.66 1.44
90° 30 0.09 5 1.61 1.40 90° 30 0.24 8 1.68 1.45 30 0.40 10 1.79 1.55
5-Q 8-Q 90° 10-Q
40 0.12 6 1.78 1.54 40 0.26 9 1.61 1.39 40 0.50 11 1.85 1.60
50 0.15 6 1.86 1.62 50 0.29 9 1.60 1.39 50 0.60 12 1.86 1.62
30-40 0.09 5 1.61 1.40 30-40 0.22 8 1.54 1.33 30-40 0.33 10 1.48 1.28
5-Q-PC 8-Q-PC 10-Q-PC
40-75 0.10 5 1.79 1.55 40-75 0.25 8 1.75 1.51 40-75 0.37 10 1.66 1.43
20 0.07 4 1.47 1.27 20 0.23 7 1.58 1.36 20 0.42 9 1.74 1.51
120° 30 0.12 5 1.61 1.40 120° 30 0.30 8 1.57 1.36 30 0.52 10 1.75 1.51
5-T 8-T 120° 10-T
40 0.16 6 1.78 1.54 40 0.36 9 1.67 1.45 40 0.65 11 1.80 1.56
50 0.20 6 1.86 1.62 50 0.40 9 1.66 1.44 50 0.75 12 1.75 1.51
30-40 0.12 5 1.61 1.40 30-40 0.29 8 1.52 1.32 30-40 0.44 10 1.48 1.28
5-T-PC 8-T-PC 10-T-PC
40-75 0.13 5 1.79 1.55 40-75 0.35 8 1.84 1.59 40-75 0.50 10 1.68 1.45
20 0.10 4 1.40 1.21 20 0.37 8 1.47 1.27 20 0.60 9 1.66 1.44
180° 30 0.19 5 1.70 1.47 180° 30 0.50 8 1.75 1.51 30 0.71 10 1.59 1.38
5-H 8-H 180° 10-H
40 0.23 6 1.70 1.47 40 0.58 9 1.80 1.56 40 0.85 11 1.57 1.36
50 0.27 6 1.68 1.45 50 0.65 9 1.80 1.56 50 0.99 12 1.65 1.43
30-40 0.18 5 1.61 1.40 30-40 0.44 8 1.54 1.33 30-40 0.66 10 1.48 1.28
5-H-PC 8-H-PC 10-H-PC
40-75 0.20 5 1.79 1.55 40-75 0.50 8 1.75 1.51 40-75 0.75 10 1.68 1.45
20 0.15 4 1.57 1.36 20 0.56 7 1.92 1.66 20 0.71 9 1.47 1.27
240° 30 0.25 5 1.68 1.45 240° 30 0.70 8 1.84 1.59 30 0.97 10 1.63 1.41
5-TT 8-TT 240° 10-TT
40 0.30 6 1.66 1.44 40 0.80 9 1.86 1.61 40 1.10 11 1.67 1.45
50 0.35 6 1.63 1.41 50 0.88 9 1.82 1.58 50 1.19 11 1.65 1.43
30-40 0.23 5 1.54 1.34 30-40 0.59 8 1.55 1.34 30-40 0.89 10 1.49 1.29
5-TT-PC 8-TT-PC 10-TT-PC
40-75 0.27 5 1.81 1.57 40-75 0.70 8 1.84 1.59 40-75 1.00 10 1.68 1.45
20 0.20 4 1.86 1.61 20 0.63 7 1.92 1.66 20 0.82 9 1.51 1.31
270° 30 0.29 5 1.73 1.50 270° 30 0.76 8 1.77 1.53 30 1.04 10 1.55 1.34
5-TQ 8-TQ 270° 10-TQ
40 0.34 6 1.68 1.45 40 0.86 9 1.78 1.54 40 1.20 11 1.62 1.41
50 0.40 6 1.66 1.44 50 0.93 9 1.71 1.48 50 1.35 11 1.66 1.44
30-40 0.26 5 1.55 1.34 30-40 0.64 8 1.49 1.29 30-40 0.99 10 1.48 1.28
5-TQ-PC 8-TQ-PC 10-TQ-PC
40-75 0.29 5 1.73 1.50 40-75 0.70 8 1.63 1.41 40-75 1.09 10 1.63 1.41
20 0.25 4 1.75 1.51 20 0.74 7 1.69 1.46 20 1.11 9 1.72 1.49
360° 30 0.38 5 1.70 1.47 360° 30 1.00 8 1.75 1.51 30 1.49 10 1.67 1.44
5-F 8-F 360° 10-F
40 0.45 6 1.66 1.44 40 1.16 9 1.80 1.56 40 1.61 11 1.63 1.42
50 0.53 6 1.65 1.43 50 1.30 9 1.80 1.56 50 1.85 11 1.71 1.48
30-40 0.35 5 1.57 1.36 30-40 0.85 8 1.49 1.29 30-40 1.33 10 1.49 1.29
5-F-PC 8-F-PC 10-F-PC
40-75 0.39 5 1.75 1.51 40-75 1.00 8 1.75 1.51 40-75 1.51 10 1.69 1.46
12' Series with 24° Trajectory —Brown 15' Series with 28° Trajectory—Black Special Patterns—Orange
Prec. Rate Prec. Rate Pattern Desc. psi Special Patterns
GPM Width Prec.
Arc Desc. psi GPM Radius Arc Desc. psi GPM Radius Length Rate*
   
20 0.40 11 1.48 1.28 20 0.68 14 1.55 1.34 20 0.38 3' x 12' 2.03
30 0.50 12 1.55 1.35 30 0.85 15 1.69 1.46 30 0.45 4' x 15' 1.44
90° 12-Q 90° 15-Q 4-EST
40 0.60 13 1.64 1.42 40 1.04 16 1.82 1.57 40 0.53 5' x 18' 1.13
50 0.63 13 1.67 1.44 50 1.23 16 2.15 1.86 50 0.60 6' x 20' 0.96
30-40 0.48 12 1.49 1.29 30-40 0.75 15 1.49 1.29 30-40 0.43 4' x 15' 1.38
12-Q-PC 15-Q-PC 4-EST-PC
40-75 0.53 12 1.65 1.43 40-75 0.81 15 1.61 1.40 40-75 0.50 4' x 15' 1.61
20 0.57 11 1.58 1.37 20 0.95 14 1.75 1.52 20 0.75 3' x 24' 2.01
30 0.72 12 1.68 1.45 30 1.10 15 1.64 1.42 30 0.90 4' x 30' 1.44
120° 12-T 120° 15-T 4-CST
40 0.87 13 1.87 1.62 40 1.30 16 1.82 1.57 40 1.04 4' x 30' 1.67
50 0.97 13 1.93 1.67 50 1.45 16 2.03 1.75 50 1.16 4' x 31' 1.80
30-40 0.64 12 1.49 1.29 30-40 1.00 15 1.49 1.29 30-40 0.86 4' x 30' 1.38
12-T-PC 15-T-PC 4-CST-PC
40-75 0.70 12 1.63 1.41 40-75 1.10 15 1.64 1.42 40-75 1.00 4' x 30' 1.61
20 0.95 11 1.76 1.52 20 1.37 13 1.79 1.55 20 1.00 9' x 18' 1.19
30 1.09 12 1.69 1.47 30 1.65 15 1.66 1.44 30 1.20 9' x 18' 1.43
180° 12-H 180° 15-H 9-SST
40 1.30 13 1.72 1.49 40 2.02 16 1.77 1.53 40 1.38 9' x 20' 1.48
50 1.55 14 1.77 1.53 50 2.14 16 1.87 1.62 50 1.55 10' x 22' 1.36
30-40 0.96 12 1.49 1.29 30-40 1.50 15 1.49 1.29 30-40 1.10 9' x 18' 1.31
12-H-PC 15-H-PC 9-SST-PC
40-75 1.05 12 1.63 1.41 40-75 1.65 15 1.64 1.42 40-75 1.20 9' x 18' 1.43
20 1.12 11 1.55 1.35 20 1.78 14 1.59 1.38 20 0.65 4' x 24' 1.30
30 1.45 12 1.69 1.46 30 2.20 15 1.64 1.42 30 0.90 4' x 30' 1.44
240° 12-TT 240° 15-TT 4-SST
40 1.63 13 1.75 1.52 40 2.66 16 1.74 1.51 40 1.04 4' x 32' 1.56
50 1.80 13 1.79 1.55 50 2.84 16 1.86 1.61 50 1.16 5' x 33' 1.35
30-40 1.28 12 1.49 1.29 30-40 2.00 15 1.49 1.29 30-40 0.88 4' x 30' 1.41
12-TT-PC 15-TT-PC 4-SST-PC
40-75 1.40 12 1.63 1.41 40-75 2.20 15 1.64 1.42 40-75 1.00 4' x 30' 1.61
20 1.05 11 1.42 1.23 20 2.10 13 1.85 1.61 20 0.08 2' x 5' 1.54
30 1.55 12 1.61 1.39 30 2.60 15 1.72 1.49 30 0.09 2' x 6' 1.44
270° 12-TQ 270° 15-TQ 2-SST
40 1.65 13 1.58 1.36 40 3.00 16 1.86 1.61 40 0.10 2' x 7' 1.38
50 1.80 13 1.59 1.38 50 3.40 16 1.98 1.72 50 0.12 3' x 7' 1.10
30-40 1.44 12 1.49 1.29 30-40 2.30 15 1.53 1.32 30-40 0.09 2' x 6' 1.44
12-TQ-PC 15-TQ-PC 2-SST-PC
40-75 1.60 12 1.66 1.44 40-75 2.50 15 1.66 1.44 40-75 0.10 2' x 6' 1.61
20 1.67 11 1.54 1.34 20 2.85 13 1.89 1.63 20 0.46 4' x 17' 1.30
30 2.19 12 1.70 1.47 30 3.60 15 1.79 1.55 30 0.55 4' x 18' 1.47
360° 12-F 360° 15-F 4S-SST
40 2.35 13 1.68 1.46 40 4.20 16 1.84 1.59 40 0.63 4' x 19' 1.60
50 2.70 13 1.79 1.55 50 4.58 16 2.00 1.73 50 0.71 5' x 19' 1.44
30-40 1.92 12 1.49 1.29 30-40 3.00 15 1.49 1.29 30-40 0.50 4' x 18' 1.34
12-F-PC 15-F-PC 4S-SST-PC
40-75 2.10 12 1.63 1.41 40-75 3.30 15 1.64 1.42 40-75 0.59 4' x 18' 1.58
Radius shown in feet. Data based on 360°.
Shaded row indicates optimal operating pressure.
▲ Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 50% of diameter.
■ Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter.
*Specialty arc nozzles are calculated using 2 overlapping nozzles and the total area formula.
All performance specifications are based on the stated working pressure available at the base of the sprinkler.
25
TVAN Variable Arc Nozzles
• Radius: 8’-17’ (2,4-5,2m)
• Arc Options: 0°-360° (infinitely adjustable)
Quick, easy and infinitely adjustable! Features & Benefits

Toro® Variable Arc Nozzles (TVAN) are designed
Matched Precipitation Rates
to deliver excellent irrigation efficiency with Within a given radius family (MPR) ensures all nozzles
maximum product versatility. apply water at approximately the same rate.
Unique Grip And Turn Adjustment

Requires no tools and makes arc setting fast and simple.
Adjust from the top of the nozzle – wet or dry.
Infinitely Adjustable From 0° - 360°

The TVAN provides a variety of arc settings to precisely
match any terrain and reduces inventory by meeting
the needs of any size or shape landscape.
Five Color-coded Nozzles

Allow for quick and easy identification even when
Easy Grip Top
retracted.
The easy grip top makes arc
adjustment from 0°-360° a snap
Specifications
TVAN Variable Arc Nozzles Model List
Model Description Operating Specifications
• Radius: 8’ to 17’ (2,4-5,2m)
TVAN8 8’ (2,4m) Variable Arc Pattern
• Recommended pressure: 30 psi (2,1 Bar)
TVAN15 15’ (4,6m) Variable Arc Pattern Additional Features
• Stainless steel adjustment screw allows up to 25%
S p e c i f y i n g I n f o r m a t i o n — T VA N radius reduction
TVANXX • Nozzle arc adjustment opens from a fixed left stop
Model Radius position indicated by an arrow on the top
• Compatibility with any female threaded riser made,
TVAN XX
means one nozzle family can meet all your needs
TVAN—Toro Variable 8—8’ (2,4m) Variable Arc Pattern
Arc Nozzle 10—10’ (3,0m) Variable Arc Pattern Warranty
12—12’ (3,7m) Variable Arc Pattern
15—15’ (4,6m) Variable Arc Pattern • Two years
17—17’ (5,2m) Variable Arc Pattern
Example: A TVAN8 nozzle, would be specified as:TVAN8
TVAN Variable Arc Nozzle Performance Data—US

8 Series-Green 10 Series-Blue 12 Series-Brown 15’ Series-Black 17’ Series-Gray
Pattern PSI Precip. Rate Precip. Rate Precip. Rate Precip. Rate Precip. Rate
GPM Rad GPM Rad GPM Rad GPM Rad GPM Rad
▲ ■ ▲ ■ ▲ ■ ▲ ■ ▲ ■
20 0.58 7 5.26 4.56 0.59 9 3.24 2.81 0.76 10 3.38 2.93 1.06 15 2.09 1.81 1.25 16 2.17 1.88
30 0.71 8 4.93 4.27 0.72 10 3.20 2.77 0.93 12 2.87 2.49 1.29 15 2.55 2.21 1.46 17 2.25 1.95
90°
40 0.82 9 4.50 3.90 0.84 10 3.73 3.24 1.07 12 3.30 2.86 1.49 16 2.59 2.24 1.68 18 2.31 2.00
50 0.92 9 5.05 4.38 0.94 10 4.18 3.62 1.21 13 3.18 2.76 1.66 16 2.88 2.50 1.87 18 2.57 2.22
20 0.81 7 3.67 3.18 0.94 9 2.58 2.24 1.35 10 3.00 2.60 1.71 14 1.94 1.68 1.95 15 1.93 1.67
30 0.99 8 3.44 2.98 1.15 10 2.56 2.21 1.65 12 2.55 2.21 2.08 15 2.05 1.78 2.38 17 1.83 1.59
180°
40 1.15 8 3.99 3.46 1.33 10 2.96 2.56 1.91 12 2.95 2.55 2.40 15 2.37 2.05 2.74 17 2.11 1.83
50 1.28 9 3.51 3.04 1.49 10 3.31 2.87 2.13 13 2.80 2.43 2.68 15 2.65 2.29 3.06 18 2.10 1.82
20 1.08 7 3.27 2.83 1.37 9 2.51 2.17 1.90 11 2.33 2.02 2.41 14 1.82 1.58 2.69 14 2.03 1.76
30 1.33 8 3.08 2.67 1.67 10 2.47 2.14 2.32 12 2.39 2.07 2.94 15 1.94 1.68 3.28 17 1.68 1.46
270°
40 1.53 8 3.54 3.07 1.92 10 2.85 2.47 2.68 12 2.76 2.39 3.38 15 2.23 1.93 3.76 17 1.93 1.67
50 1.70 9 3.11 2.69 2.15 10 3.19 2.76 2.99 12 3.08 2.67 3.77 16 2.18 1.89 4.19 18 1.92 1.66
20 1.25 7 2.84 2.46 1.73 9 2.37 2.06 2.27 10 2.52 2.19 2.69 13 1.77 1.53 3.05 17 1.17 1.02
30 1.52 8 2.64 2.29 2.11 10 2.35 2.03 2.77 12 2.14 1.85 3.26 15 1.61 1.40 3.73 17 1.43 1.24
360°
40 1.75 9 2.40 2.08 2.42 10 2.69 2.33 3.12 12 2.41 2.09 3.79 15 1.87 1.62 4.26 18 1.46 1.27
50 1.96 9 2.69 2.33 2.69 10 2.99 2.59 3.47 12 2.68 2.32 4.33 16 1.88 1.63 4.71 18 1.62 1.40
Shaded data indicates optimal operating pressure.
26
Stream Spray Nozzles
• Radius: 13’-22’ (4,0-6,7m) Specifications
• Recommended operating pressure range:
20-75 psi (1,4-5,2 Bar)
• Flow Rate: 0.60 – 2.70 GPM (2,3-10,2 LPM)
• Radius adjusts up to 50%
• 10° or 35° Angle
• Non-Rotating
Warranty
Two years
Stream Spray Nozzles Model List

Performance Data Performance Data Non-Pressure Compensating
10° Stream Spray—US 35° Stream Spray—US Model Description
Prec. Rate* Prec. Rate*
Pattern Desc. psi GPM Radius  Pattern Desc. psi GPM Radius
   10-SSQ 90° Arc
90° 10-SSQ 20 0.60 14 1.36 1.18 90° 35-SSQ 20 0.60 18 .82 .71
10-SSH 180° Arc
30 0.80 16 1.39 1.20 30 0.80 20 .89 .77
40 0.92 17 1.42 1.23 40 0.92 21 .93 .80 10-SSF 360° Arc
50 1.03 18 1.41 1.22 50 1.03 22 .95 .82
10-SSQ- 40-50 0.70 13 1.84 1.60 35-SSQ- 40-50 0.70 17 1.08 .93 35-SSQ 90° Arc
PC 60-70 0.70 15 1.38 1.20 PC 60-70 0.70 18 .96 .83 35-SSH 180° Arc
180° 10-SSH 20 1.00 14 1.13 .98 180° 35-SSH 20 1.00 18 .69 .59
35-SSF 360° Arc
30 1.20 16 1.04 .90 30 1.20 20 .67 .58
40 1.38 17 1.06 .92 40 1.38 21 .70 .60
50 1.55 18 1.06 .92 50 1.55 22 .71 .62 Pressure Compensating
10-SSH- 40-50 1.40 13 1.84 1.60 35-SSH- 40-50 1.40 17 1.08 .93
PC 60-70 1.40 15 1.38 1.20 PC 60-70 1.40 18 .96 .83 10-SSQ-PC 90° Arc
360° 10-SSF 20 1.80 14 1.02 .88 360° 35-SSF 20 1.80 18 .62 .54
10-SSH-PC 180° Arc
30 2.10 16 .91 .79 30 2.10 20 .58 .51
40 2.42 17 .93 .81 40 2.42 21 .61 .53 10-SSF-PC 360° Arc
50 2.70 22 .62 .54
50 2.70 18 .93 .80
35-SSF- 40-50 1.80 17 .69 .60
35-SSQ-PC 90° Arc
10-SSF- 40-50 1.80 13 1.18 1.03
PC 60-70 2.00 15 .99 .86 PC 60-70 2.00 18 .69 .59 35-SSH-PC 180° Arc
Note: Stream sprays are not recommended for turf applications. Radius shown in feet. Data based on 360°. 35-SSF-PC 360° Arc
Stream Bubbler Nozzles

Specifications
• Radius: 1.5’-18’ (0,5-5,5m)
• Recommended operating pressure range: 10-75 psi
(0,7-5,2 Bar)
• Flow Rate: 0.49 – 2.02 GPM (1,9-9,0 LPM)
• Fits all Toro spray bodies, shrub
adapters, risers and riser extenders
Warranty
Two years
Stream Bubbler Nozzle Performance Data Stream Bubbler Nozzles Model List
Pattern Description
10 psi 20 psi 30 psi 40 psi 50 psi 60 psi Model Description
GPM Rad GPM Rad GPM Rad GPM Rad GPM Rad GPM Rad
2/60° SB-90 0.49 7 0.70 11 0.86 13 1.00 15 1.12 16 1.23 18 Pressure Compensating
2/60° SB-90-PC2 0.21 1.5 0.22 1.5 0.23 1.5 0.24 1.5
4/60° SB-180 0.84 5 1.18 9 1.43 12 1.66 14 1.86 16 2.02 17 • SB-90-PC2 90° Arc, 2’ Radius
4/60° SB-180-PC2 0.46 2.5 0.49 2.5 0.50 2.5 0.51 2.5 • SB-180-PC2 180° Arc, 2’ Radius
6/60° SB-360 1.18 3 1.63 6 2.00 8 2.29 9 2.55 10 2.82 11
• SB-360-PC2 360° Arc, 2’ Radius
6/60° SB-360-PC2 0.74 1.5 0.75 1.5 0.76 1.5 0.77 1.5
• SB-2-180-PC2 180° Arc, 2 Stream,
2/180° SB-2-180 0.49 7 0.70 11 0.86 13 1.00 15 1.12 16 1.23 18
2/180° SB-2-180-PC2 0.21 1.5 0.22 1.5 0.23 1.5 0.24 1.5 2’ Radius
2/60x2/60° SB-4-180 0.84 5 1.18 9 1.43 12 1.66 14 1.86 16 2.02 17 • SB-4-180-PC2 180° Arc, 4 Stream,
2/60x2/60° SB-4-180-PC2 0.46 2.5 0.49 2.5 0.50 2.5 0.51 2.5 2’ Radius,
27
Pressure-compensating Flood Bubblers
Specifications
• Recommended operating pressure range: 20-75 psi (1,4-5,2 Bar)
Maximum pressure: 75 psi (5,2 Bar)
• Flow Rate: Adjustable: 0 – 2.0 GPM (0-7,6 LPM);
Fixed Flow: 0.25, 0.50 and 1.0 GPM (0,9; 1,9; 3,8 LPM)
• Adjustment screw allows up to 25% reduction in radius
• Compatible with shrub adapter, 570Z Series sprinklers, risers and
riser extenders
Warranty
Two years
Pressure-compensating Flood Bubblers

Model List
Flood Bubbler Performance Data
GPM GPM GPM
Model Description
Pattern Model No. @ 40 psi @ 50 psi @ 60 psi FB-25-PC .25 GPM (0,9 LPM)
FB25PC 0.25 0.25 0.25
FB-50-PC .50 GPM (1,9 LPM)
Flood FB50PC 0.45 0.50 0.50
l FB100PC 0.95 1.00 1.00
FB-100-PC 1.00 GPM (3,8 LPM)
FB200ADJPC 1.90 2.00 2.00 FB-200-ADJ-PC2.00 Adjustable GPM (LPM)
500 Series Bubblers

Specifications
• Recommended operating pressure range:
– Flood: 15-75 psi (1,0-5,2 Bar)
– Stream: 10-75 psi (0,7-5,2 Bar)
Maximum pressure: 75 psi (5,2 Bar)
• Flow Rate:
– Flood: 1.7 – 2.7 GPM (6,4-10,2 LPM)
– Stream: 1.08 – 3.70 GPM (4,1-14,0 LPM)
• Inlet: ½” (12mm) female thread
• Attaches directly to risers
• Radius adjusts up to 50%
Warranty
Two years
Adjustable Flood Bubbler Nozzle Performance Data—US
Pattern Model No. psi GPM
15 1.70
Universal 514-20 20 2.00
Flood 25 2.20
l 30 2.40
35 2.50
40 2.70 500 Series Bubblers Model List
500 Series Adjustable Stream Bubbler Nozzle Performance Data —US Model Description
Pattern Model No.
10 psi 20 psi 30 psi 40 psi 511-30 90° Arc, Stream Bubbler
GPM Rad GPM Rad GPM Rad GPM Rad 512-30 180° Arc, Stream Bubbler
2/60° 511-30 1.08 10 1.52 14 1.87 16 2.10 17
514-30 360° Arc, Stream Bubbler
4/60° 512-30 1.50 7 2.11 10 2.58 11 2.98 13
6/60° 514-30 1.89 6 2.61 8 3.20 10 3.70 11
516-30 180° Arc, 2-stream Bubbler
2/180° 516-30 1.08 10 1.52 14 1.87 16 2.10 17 514-20 Universal Flood Bubbler
28
Spray Tools and Accessories
Effluent Water Indicators Serviceable Parts Tools
570SEAL
• Serviceable seal for

all 570Z models 89-6395
• Reccommended for
89-9752 upgrades • Riser pull-up and screen removal
tool for all 570Z Series models
• Lavender snap-on cover for use
on 570Z Series pop-up models Check Valve
570CV
• Check valve for all
the 570Z models
• Install in field to
prevent low head
drainage 102-1777
102-1211
• X-tool for 570Z XF/PRX
• Lavender molded cap for use on
Series models for easy
570Z Series pop-up models Risers and Extenders nozzle removal and
• Includes wiper seal
assembly
570-6X
• 570Z Extender
• Male-inlet threads
install onto any 570Z
pop-up sprinkler or
shrub adapter to
102-0563
provide a 6" (15cm) 89-7350
extension
• Lavender molded 570Z
• Maximum pressure: • Adjustment tool for all 570Z
Series shrub adapter
75 psi (5,2 Bar) Series models
• Installs onto a ½”
(12mm) NPT riser
570SR-6 and 570SR-18

PRNTOOL
• 570Z stationary riser
• ½” (12mm) male- • PRN Adjustment Tool for
threaded inlet for Precision™ Series Rotating
installation on pipe Nozzles
fittings • Adjusts arc and radius.
• Maximum pressure:
75 psi (5,2 Bar)
• Height: 6" (15cm), 18"
(45cm)
29
Super Funny Pipe®
• 20’ (6m), 50’ (16m), 100’ (30,5m) Coils
• Up to 120 psi (8,3 Bar)
Toro® Super Funny Pipe is practical and saves Features & Benefits
time. Whether you are installing a new system
or replacing an old sprinkler, Super Funny Pipe Flexible, Thick-walled Polyethylene Pipe
Super Funny Pipe is a high-strength poly tubing that
makes the job easier.
solves tough sprinkler installation and replacement
problems. It acts as an extension cord between the
water line and the sprinkler.
Easy Installation For Problem Areas

One of the most useful and time-saving sprinkler
installation aids whether you are installing a new
system or replacing an old sprinkler. Also comes
pre-assembled as the Super Funny Pipe Swing Joints
in 8” (20,3cm) and 12” (30,5cm) lengths or just get
the individual fittings as needed.
Specifications
Dimensions
• Wall thickness: .10” ± .01 (2,5mm ± 0,25)
• Inside diameter: .49” ± 0.005 (12,4mm ± 0,13)
• Outside diameter: .70” (17.8mm)
• Maximum pressure: 120 psi (8,3 Bar)
• Cushions sprinklers from external impact
• Connects to sprinklers and Toro fittings
Warranty
Two years
Super Funny Pipe Model List

Model Description
850-23 20’ (6,1m)Length, 3⁄8” (9,5mm)
Super Funny Pipe Friction Loss Data Polyethylene Pipe
GPM Flow 850-24 50’ (15,2m) Coil, 3⁄8” (9,5mm)
GPM 1 2 3 4 5 6 7 Polyethylene Pipe
PSI Loss 0.01 0.02 0.06 0.09 0.15 0.21 0.27 850-25 100’ (30,4m) Coil, 3⁄8” (9,5mm)
This chart indicates the amount of pressure loss (psi) per Polyethylene Pipe
foot of Super Funny Pipe at stated flow rates (GPM).
30
Super Funny Pipe® Swing Joints
Top pair:
12” and 8” Long X 1/2”
Super Funny Pipe Swing Joints Model List (30,5cm and 20,3cm X 13mm)
Model Description
SPFA-585 8” x 1⁄2” (200 x 13mm)
SPFA-5875 8” x 3⁄4” (200 x 20mm)
SPFA-5125 12” x 1⁄2” (300 x 13mm)
SPFA-51275 12” x 3⁄4” (300 x 20mm)
Warranty
Two years
Bottom pair:
12” and 8” Long X 3/4”
(30,5cm and 20,3cm X 20mm)
Super Funny Pipe® Fittings
Super Funny Pipe Fittings Friction Loss Data

GPM Flow
Model No. Description
1 2 3 4 5 6 7
850-36 3
⁄4" Male Adapter 0.04 0.10 0.23 0.43 0.80 1.37 1.86
850-35 1
⁄2" Male Adapter 0.03 0.06 0.18 0.31 0.60 1.00 1.41
850-31 1
⁄2" Male Elbow 0.05 0.15 0.36 0.62 1.13 1.62 2.37
850-34 ⁄2" Female Elbow 0.05 0.15 0.36 0.62 1.13 1.62 2.37
850-35
850-33
1
850-32 3
⁄4" Male Elbow 0.06 0.18 0.41 0.80 1.42 2.20 3.05 850-36
This chart indicates the amount of pressure loss (psi) per foot of
Super Funny Pipe at stated flow rates (GPM).
Super Funny Pipe Fittings Model List 850-20 850-37

Model Description
850-20 Coupling
850-31 Male Elbow, 1⁄2” (13mm)
850-32 Male Elbow, 3⁄4” (20mm)
850-33 Female Adapter, 1⁄2” – 3⁄4” (13-20mm)
850-34 Female Elbow, 1⁄2” (13mm) 850-31
850-35 Male Adapter, 1⁄2” (13mm)
850-36 Male Coupling, 3/4” (20mm)
850-37 Tee, Barbed Inserts 850-34 850-32
850-60 Saddle Tee, 3/4” (20mm)
850-61 Saddle Tee, 1” (25mm)
Warranty
Two years
31
Rotors Overview
300
Model Mini-8 T5 Super 800 TR50XT T7
Multi-Stream
Page Number 34-35 36-37 38-39 40-41 42-43 44-45
Inlet size 1/2” (13mm) 3/4” (20mm) 3/4” (20mm) 3/4” (20mm) 3/4” (20mm) 1” (25mm)
20’-35’ 15’-33’ 25’-50’ 28’-50’ 28’-48’ 46’-83’
Radius (6,1-10,7m) (4,6-10,1m) (7,6-15,2m) (8,5-15,2m) (8,5-14,6m) (14,0 - 25,0m)
0.8-3.40 GPM 0.57-7.54 GPM 0.76-9.63 GPM 0.5-10.0 GPM 1.0-9.8 GPM 6.7 - 30.6 GPM
Flow Range (3,0-12,9 LPM) (2,0-28,0 LPM) (2,8-36,5 LPM) (1,9-37,9 LPM) (3,8-37,0 LPM) (25,4-116 LPM)
Operating Pressure 30-50 PSI 35-50 PSI 25-70 PSI 30-70 PSI 30-70 PSI 40-100 psi
Range (2,0-3,5 Bar) (2,4-3,5 Bar) (1,7-4,8 Bar) (2,0-4,8 Bar) (2,0-4,8 Bar) (2,8 - 7,0 Bar)
Artificial Turf
Shrubs/Ground Cover X X X X
Slopes X X X X
Low Pressure X X X X
High Traffic/Vandal
X
Prone Areas
Rubber Cover for
X X X X
Sports Fields
High Wind X X X
Normally Open
Hydraulic System
Full Circle X X X X X X
Part-circle Adjustable X X X X X
Part-circle Fixed X
Part/Full Circle In One X X X X X X
Stainless Steel Riser X X
Check Valve Optional Optional Optional Optional Standard Standard
Effluent Water Option X X X X X
Shrub Model X X X X
High Pop Model X X X X
Smart-Arc Memory X X X
Below Grade X X
Trajectory Adjustment 5°-25°
X-Flow Water Shut-off X
Standard Pop-up 4” 2 ¾”-3 ¾” 5” 4 ½” 5” 5”
Height (100mm) (70-95mm) (127mm) (114mm) (127mm) (127mm)
Warranty Two years Two years Five years Five years Five years Five years
32
Model TR70XTP 640 TS90 TG101 690
Page Number 46-47 49-51 52-53 54-55 56

Inlet size 1” (25mm) 1” (25mm) 1” (25mm) 2” (50mm) 1½” (37mm)
30’-68’ 47’-67’ 53’ - 95’ 91’-178’ 87’-108’
Radius (9-21m) (14-20m) (16-29m) (27-54m) (26,5-33m)
6.7-27.0 GPM 6.0-25.0 GPM 14.0-61.5 GPM 42-248 GPM 51.0-82.2 GPM
Flow Range (25-102 LPM) (23-95 LPM) (53-233 LPM) (158-938 LPM) (193-311 LPM)
Operating Pressure 40-100 PSI 40-90 PSI 40-100 PSI 50-95 PSI 80-100 PSI
Range (2,8-7,0 Bar) (2,8-6,2 Bar) (2,8-7,0 Bar) (3,5-6,5 Bar) (5,5-7,0 Bar)
Artificial turf X X X
Shrubs/Ground Cover
Slopes
Low Pressure
High Traffic/Vandal
X X
Prone Areas
Rubber Cover for
X X X
Sports Fields
High Wind X X X
Normally Open
X X
Hydraulic System
Full Circle X X 1 and 2 Speed
Part-circle Adjustable X
Part-circle Fixed X 90˚ and 180˚
Part/Full Circle In One X X X
Stainless Steel Riser X X
Check Valve Standard Standard Standard X
Effluent Water Option X X X X
Shrub Model
High Pop Model
Smart-Arc Memory X X
Below Grade X X X
Trajectory Adjustment 5°-25° 7°-30°
X-Flow Water Shut-off X
Standard Pop-up
5” (127mm) 2 3⁄8” (60mm) 4” (100mm) 2¼” (57mm)
Height
Warranty Five years Five years Five years Two years Three years
33
Mini 8 Series
• Inlet Size: ½” (13mm)
• Radius: 20’-35’ (6,1-10,7m)
When spray heads won’t do the job and a full size Features & Benefits
rotor is just too much, you need the Mini 8 from
Toro®. Designed to fill in that hard to cover area Top Arc Indication
between 20’ (6,1m) and 35’(10,7m), the Mini 8 Ensures easy adjustments from 40° to 360° with visual
provides great value and water efficiency for your feedback of arc change by reading the scale.
landscapes.
Stainless Steel Radius Adjustment Screw
Allows up to 25% reduction.
Pressure Activated Seal

The seal and robust trip mechanism offer enhanced
reliability.
Ratcheting Riser
Easily shift the riser and fixed left stop to the desired
position.
Five Interchangeable Nozzles

To cover varying flow and radius requirements (comes
pre-installed with a 1.5 nozzle).
Part And Full Circle In One

Offers convenience and reduces inventory requirements.
Check
Valve
Options
Available
Not Too Big and Not Too Small -

the Mini 8 is Just Right
With the smaller nozzle set you get lower flows on smaller
spaces providing more efficient application and water
savings. And compared to sprays, it saves on the number
Nozzle Tree— of heads which in turn reduces the number of valves and
Five interchangeable nozzles stations required. No matter how you look at it, the Mini 8
– comes pre-installed with a brings together money savings with better water management.
1.5 nozzle
34
Arc setting is visible from
the top of sprinkler
Optional Check Valve
Prevents low head

drainage and puddling
at the sprinkler.
Mini 8 Performance Data—US

Prec. Rate
Arc Scale Nozzle psi GPM Radius
▲ ■
Use a slotted screwdriver to turn. Read arc change on the arc
30 0.8 20 0.21 0.18
scale as the screwdriver is turned. The arrow points to the
arc degrees. .75 40 0.9 21 0.22 0.19
50 1.0 22 0.23 0.20
30 1.0 26 0.15 0.13
1.0 40 1.1 27 0.17 0.15
50 1.3 28 0.18 0.16
Specifications 30 1.3 29 0.12 0.15

1.5* 40 1.5 30 0.19 0.16
Dimensions 50 1.7 31 0.20 0.17
30 1.7 30 0.21 0.18
• Body height: 6” (150mm)
• Pop-up to nozzle height: 3 ¾” (95mm)
2.0 40 2.0 31 0.23 0.20
50 2.3 31 0.27 0.23
• Exposed diameter: 1 ¾” (45mm)
30 2.6 34 0.25 0.22
• Cap diameter: 2 ¼” (57mm)
• Inlet: ½” (13mm) female-threaded 3.0 40 3.0 35 0.27 0.24
50 3.4 35 0.31 0.27
Operating Specifications Radius shown in feet. Data based on 360°.
* ▲ Precipitation rates are for triangular spacing, shown in

• Radius: 20’–35’ (6,1–10,7m) inches per hour, calculated at 50% of diameter.
• Operating pressure range: * ■ Precipitation rates are for square spacing, shown in inches
per hour, calculated at 50% of diameter.
30-60 psi (2,0-4,1 Bar) All performance specifications are based on the stated
working pressure available at the base of the sprinkler.
• Flow Rate: 0.80 – 3.40 GPM (3,0-12,9 LPM) * Pre-installed nozzle.
• Trajectory: 25°
Options Available
• MINI8-CV - Check Valve – maintains up to
8’ elevation change (Bag of 25)
• 102-2024 – Adjustment Tool Mini 8 Model List
Warranty Model Description
• Two years MINI8-4P Mini 8 Rotor, 4” (100mm) Lawn Pop-up
MINI8-4P-XX-CV
Description Body Nozzle Optional
MINI8 4P XX CV
MINI8—Mini 8 Rotor 4P—Lawn Pop-up 75—.75 20—2.0 CV—Check Valve
10—1.0 30—3.0
15—1.5
Example: A Mini 8 Series sprinkler with a 3.0 nozzle,
would be specified as: MINI8-4P-30
Note: MINI8-CV available in bags of 25.
35
300 Series Multi-Stream Rotor®
• Inlet Size: ¾” (20mm) for Lawn and High-pop; ½”-¾” (13-20mm) for Shrub model
• Radius: 15’-30’ (4,6-9,2m)
The 300 Series Multi-Stream Rotor from Toro® Features & Benefits
combines a highly distinctive way to irrigate with
the reliability you’ve come to expect. Uniquely Unique Multiple Rotating Streams
designed, Multi-Stream Rotors feature multiple Provide slow, effective watering, plus you can zone
rotating streams, a slower precipitation rate and your arcs together, saving time and water.
excellent wind resistance.
Matched Precipitation Rate Arc Discs
Ensures uniform delivery of water across each square
foot of an irrigated area, resulting in high-precision
water application.
Choice Of Six Nozzles And Nine

Interchangeable Arc Discs
For maximum versatility covering varying landscape
needs (4 separate nozzles for high-pops).
Selection Of Pop-up Heights

3” (76,2mm) Lawn Pop-up, shrub and high-pop – to
satisfy varying installation requirements.
Effluent Check
Options Valve
Available Options
Available
A Winning Combination of Watering Efficiency

and Visual Appeal
The exclusive “fingers of water” application takes a flow of water
and divides it into smaller streams at different trajectories for a
stronger performance all across the landscape. Shorter radii get
the coverage needed with enough water still in the main stream
to reach longer distances. This also creates a heavier watering
stream at the tail end of the spray allowing for greater
wind resistance.
36
Specifications
300 Series arc discs
Dimensions come in 9 different selections
• Body Diameter: 2 3⁄8” (60mm)
• Cap Diameter: 3”(75mm)
• Height:
− Lawn Pop-up: 6 1⁄8” (155mm) 300 Series:
− High-Pop: 16” (405mm) Shrub w/COM (360° Arc Disc)
• Shrub Base Diameter: 1 ¾” (45mm) (Model Nos. 300-10-00COM)—US
300 Series
Operating Specifications Nozzle psi GPM Radius
01 50 2.07 14
• Radius: 15’-30’ (4,6-9,2m)
01 75 2.95 16
• Flow Rate: 02 50 2.48 23
− Lawn Pop-up and High-pop: 0.57-7.51 GPM (2,1-28,4 LPM) 02 75 3.69 25
− Shrub (COM): 2.07-6.36 GPM (7,8-24,0 LPM) 03 50 4.55 27
300 Series Lawn Pop-up
• Operating Pressure Range: 35-50 psi (2,4-3,5 Bar) 03 75 6.24 29
Apex @ 50 psi—US
• Trajectory: 3 angles to cover short, medium & large radius 63 50 2.66 28
• Pop-up to nozzle: 27° 63 75 3.82 30
Nozzle
− Lawn Pop-up: 2 ¾” (70mm) Max. Ht. of Spray 93 50 3.64 29
− High-Pop: 11 ¾” (298mm) 01 4' 10" 93 75 5.29 31
• Inlet (Female-threaded): 02 5' 1" Omni (Min) 50 2.67 16
− Lawn Pop-up and High-pop: ¾” (20mm) 03 5' 11" Omni (Min) 75 3.95 18
− Shrub: ½” to ¾” (13-20mm) 63 7' 0" Omni (Max) 50 5.08 30
• Large basket filter screen 93 6' 3" Omni (Max) 75 6.36 33
300 Series: 300-15 and 300-25 Omni™ Adjustable-radius Nozzle

Options Available Performance Chart
Precipitation
• Recycled Water Indicators: psi Radius Rate* 90° 112° 135° 157.7° 180° 202.5° 225° 270° 360°
– 89-7853 — Omni Nozzle Cover (Use with Part No. 300-15) ▲ ■ GPM
– 89-7854 — High-pop Omni Nozzle Cover 35 15 1.69 1.46 0.85 1.06 1.28 1.49 1.70 1.91 2.13 2.55 3.41
(Use w/Part No. 300-25) 35 18 1.37 1.19 1.00 1.24 1.50 1.75 2.00 2.25 2.50 3.00 4.00
35 21 1.15 1.00 1.15 1.42 1.72 2.01 2.29 2.58 2.86 3.44 4.58
– 89-7889 — Rotor Plug 35 24 0.99 0.86 1.29 1.60 1.94 2.26 2.58 2.91 3.23 3.88 5.17
• Check Valve - maintains up to 8’ elevation change 35 26 0.95 0.82 1.44 1.79 2.16 2.52 2.88 3.24 3.60 4.32 5.76
(shrub com only) 50 18 1.60 1.38 1.16 1.44 1.74 2.04 2.33 2.62 2.91 3.49 4.65
50 21 1.35 1.17 1.34 1.66 2.01 2.35 2.68 3.02 3.35 4.02 5.36
• 35-1344 — Locking cap for Lawn Pop-up models 50 24 1.17 1.02 1.52 1.88 2.28 2.66 3.04 3.42 3.80 4.56 6.08
(standard on high-pop models) 50 27 1.04 0.90 1.70 2.10 2.55 2.97 3.40 3.82 4.24 5.09 6.79
50 30 0.93 0.80 1.88 2.33 2.82 3.29 3.75 4.23 4.69 5.63 7.51
Warranty
• Two years 300 Series: Fixed-radius Nozzle Performance Chart
Precip.
Nozzle psi Radius Rate* 90° 112° 135° 157.7° 180° 202.5° 225° 270° 360°
▲ ■ GPM
35 16 0.99 0.86 0.57 0.71 0.86 1.00 1.14 1.28 1.43 1.71 2.28
01
50 18 0.99 0.86 0.72 0.90 1.08 1.26 1.44 1.62 1.80 2.16 2.88
35 21 0.73 0.63 0.72 0.90 1.08 1.26 1.44 1.62 1.80 2.16 2.88
02
300 Series Multi-Stream Rotor Model List 50 24 0.66 0.57 0.85 1.06 1.28 1.49 1.71 1.92 2.13 2.56 3.41
35 28 0.77 0.67 1.36 1.69 2.04 2.38 2.72 3.05 3.39 4.07 5.43
03
Model Description 50 30 0.80 0.69 1.61 2.01 2.42 2.82 3.23 3.63 4.03 4.84 6.45
35 28 0.39 0.33 0.68 0.85 1.02 1.19 1.36 1.53 1.70 2.04 2.72
63§
300-00-00 Lawn Pop-up w/o Nozzle 50 30 0.40 0.35 0.81 1.00 1.21 1.41 1.62 1.82 2.02 2.42 3.23
300-10-00 Shrub w/o Nozzle 35 28 0.58 0.50 1.02 1.27 1.53 1.78 2.04 2.29 2.54 3.05 4.07
93§
50 30 0.60 0.52 1.21 1.51 1.82 2.12 2.42 2.72 3.03 3.63 4.84
300-10-00-COM Shrub w/o Nozzle with Check Valve * ▲ Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 50% of diameter.
300-12-00 12” (300mm) Pop-up w/o Nozzle ■ Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter.
§ Low gallonage.
Specifying Information— 300 Series Multi-Stream Rotor

3XX-XX-XX-COM-E
Arc Body Nozzle Optional Optional
3XX XX XX COM E
04—90° 00—Lawn Pop-up 01—Small Radius, 12 Ports COM—Check-O-Matic E—Effluent
05—112° 10—Shrub 02—Medium Radius, 12 Ports
06—135° 12—High- pop 03—Large Radius, 12 Ports (COM available on shrub
07—157.5° 15—Adjustable Shrub & Lawn Pop-up model only)
08—180° 63—Large Radius, 6 Ports, Low GPM*
09—202.5° 93—Large Radius, 9 Ports, Low GPM*
10—225°
12—270°
16—360°
Example: A 300 Series Shrub Sprinkler with a 90° arc and an adjustable nozzle, would be specified as: 304-10-15
* Available on Lawn Pop-up and Shrub only
** Must be used on High-pop body
37
T5 Series
• Inlet Size: ¾” (20mm)
• Radius: 25’-50’ (7,6-15,2m)
The new Toro® T5 Series Rotor has the features Features & Benefits
to satisfy all your basic irrigation needs while
surprising you with a few extras. 5” (127mm) Pop-Up
Easily replaces many competitive 4’ (100mm) units in
the same footprint but delivers an extra inch of pop-up.
Standard Rubber Cover

The top of the sprinkler is covered with a heavy duty
rubber cover to minimize impact injuries and reduce
liability.
Nozzle Tree
The T5 comes with a full nozzle tree of 8 standard
nozzles (25°) and 4 low angle nozzles (10°).
Optional Check Valve

Available with a hold back strength of 7’ (2,1m) of
elevation change.
Top Adjust Arc Set

The T5 can be set between a minimum arc set of 40°
and a full circle set of 360°. Arc changes are made from
the top of the sprinkler while popped up or down by
using a small slotted screwdriver.
NOTE: See Page 61 For T5 Service Kits

102-7715—T5 Tool Kit
102-7712—T5 Nozzle Tree Kit
102-7714—T5 Check Valve Kit
Effluent Check
Options Valve
Available Options
Available
Nozzles
Geometry on the face of
the nozzle creates breakup.
Stream straighteners align

the water flow behind the
nozzle.
Extensive testing for T5 nozzle efficiency was
performed using SPACE calculations
38
Specifications T-5 Nozzle Performance Data—US
Precipitation Rate
Dimensions Nozzle PSI Radius GPM
(in/hr)▲ (in/hr)■
Lawn Pop Shrub HP 25 33 1.15 0.23 0.20
35 34 1.38 0.27 0.23
Body 2 ¼” 2 ¼” 2 ¼” 1.5 45 35 1.59 0.29 0.25
Diameter: (57mm) (57mm) (57mm) 55 35 1.74 0.32 0.27
65 36 1.88 0.32 0.28
Cap 2 5⁄8” 2 5⁄8”
Diameter: N/A 25 35 1.45 0.26 0.23
(67mm) (67mm) 35 36 1.80 0.31 0.27
7 ½” 7 ¾” 16 7⁄8” 2.0 45 37 2.12 0.34 0.30
Height: 55 37 2.30 0.37 0.32
(190mm) (196mm) (200mm)
65 37 2.58 0.42 0.36
Operating Specifications 25 35 1.75 0.32 0.28
35 36 2.20 0.38 0.33
• Radius: 25’-50’ (7,6-15,2m) 2.5 45 37 2.55 0.41 0.36
• Flow Rate: .76 – 9.63 GPM (2,8-36,5 LPM) 55 37 2.80 0.45 0.39
• Operating Pressure Range: 25-70 PSI (1,7-4,8 Bar) 65 37 3.05 0.50 0.43
• Trajectory: 25° standard, 10° low angle 25 36 2.20 0.38 0.33
35 38 2.60 0.40 0.35
• Pop-up to nozzle: 5” (127mm) 3.0*
45 40 3.05 0.42 0.37
• Inlet: ¾” (20mm) 55 40 3.52 0.49 0.42
• Factory installed with a #3.0 nozzle 65 40 3.80 0.53 0.46
25 37 2.95 0.48 0.41
Options Available 35 40 3.55 0.49 0.43
4.0 45 42 4.10 0.52 0.45
• Check valve 55 42 4.45 0.56 0.49
65 43 4.85 0.58 0.50
Warranty 25 39 3.75 0.55 0.47
• Five years 35 41 4.50 0.60 0.52
5.0 45 43 5.10 0.61 0.53
55 45 5.75 0.63 0.55
65 45 6.10 0.67 0.58
25 39 4.20 0.61 0.53
35 43 5.20 0.63 0.54
6.0 45 46 6.05 0.64 0.55
55 47 6.65 0.67 0.58
65 48 7.25 0.70 0.61
25 36 5.75 0.99 0.85
35 43 7.10 0.85 0.74
8.0 45 47 8.05 0.81 0.70
55 48 8.95 0.86 0.75
65 50 9.70 0.86 0.75
* Pre-installed nozzle
Precipitation Rate
T5 Series Model List Nozzle PSI Radius GPM
(in/hr)▲ (in/hr) ■
25 25 0.74 0.26 0.23
Model Description 35 28 0.94 0.27 0.23
1.0LA 45 28 1.02 0.29 0.25
• T5P 5” (127mm) Lawn Pop-up w/o check valve
55 29 1.14 0.30 0.26
• T5PCK 5” (127mm) Lawn Pop-up w/ check valve 65 29 1.25 0.33 0.29
• T5PE 5” (127mm) Lawn Pop-up w/o check valve-effluent 25 27 1.10 0.34 0.29
• T5S Shrub 35 30 1.35 0.33 0.29
• T5HP High-Pop 1.5LA 45 31 1.52 0.35 0.30
55 31 1.75 0.40 0.35
• T5SE Shrub, Effluent 65 31 1.90 0.44 0.38
• T5HPE High-Pop, Effluent 25 29 1.40 0.37 0.32
35 31 1.72 0.40 0.34
2.0LA 45 32 2.05 0.45 0.39
55 33 2.25 0.46 0.40
65 33 2.45 0.50 0.43
25 29 2.20 0.58 0.50
35 33 2.60 0.53 0.46
3.0LA 45 34 3.05 0.59 0.51
55 36 3.40 0.58 0.51
65 36 3.70 0.63 0.55
Radius shown in feet.
Data based on 180°.
Specifying Information—T5 Sprinkler
T5XX-XXXX-CK-X
Description Body Nozzle Optional Optional
T5 XX XXXX CK E
T5 P—Lawn Pop-up 15—1.5 GPM 40—4.0 GPM Low Angle Nozzle CK— Check-O-Matic* E—Effluent
S—Shrub 20—2.0 GPM 50—5.0 GPM 10LA—1.0 GPM
HP—High Pop 25—2.5 GPM 60—6.0 GPM 15LA—1.5 GPM
30—3.0 GPM 80—8.0 GPM 20LA—2.0 GPM
30LA—3.0 GPM
Example: A T5 Lawn Pop-up sprinkler with a 2.5 nozzle, would be specified as: T5P-25
39
Super 800 Series
• Radius: 28’-50’ (8,5-15,2m)
For everyday outstanding performance in a rotor, Features & Benefits

the Toro® Super 800 Series provides for all your
watering needs. Five Inch Pop-Up Height
Clears tall grasses and allows for less frequent mowing.
Standard rubber cover with

arc indicator scale on top Arc Indicator On Top
Top Arc indicator for easy adjustments from 40° to
360° - read the arc change off the scale as you make
adjustments.
Smart Arc™ Memory

Returns sprinkler to previously set arc if vandalized
without damage.
Continuous Unidirectional Rotation

Provides uniform coverage when set at full circle.
Part And Full Circle In One Sprinkler

Installation convenience and reduced inventory
requirements.
Effluent Check
Options Valve
Available Options
Available
Check valve
The optional check valve eliminates low head drainage and

keeps the laterals fully charged with water.
40
Super 800 Standard Nozzle Performance Data
Specifications
Precipitation Rate
Dimensions Nozzle psi GPM Radius
(in/hr) ▲ (in/hr) ■
• Body Diameter: 30 0.5 28 0.07 0.06
– Lawn Pop-up: 2 3⁄8” (60mm) 40 0.6 29 0.08 0.07
.50
– High-pop: 2 ¼” (57mm) 50 0.7 29 0.09 0.08
• Cap Diameter: 60 0.8 30 0.10 0.09
– Lawn Pop-up: 2 5⁄6” (67mm) 30 0.7 29 0.09 0.08
– High-pop: 3” (76mm) 40 0.8 30 0.10 0.09
.75 50 0.9 31 0.10 0.09
• Height:
60 1.0 32 0.11 0.09
– Lawn Pop-up: 7 5⁄8” (194mm)
30 1.3 32 0.14 0.12
– High-Pop: 17” (431mm)
40 1.5 33 0.15 0.13
– Shrub: 7 ¾” (197mm) 1.0 50 1.6 34 0.15 0.13
60 1.8 35 0.16 0.14
Operating Specifications 30 2.4 37 0.19 0.17
• Radius: 28’-50’ (8,5-15,2m) 40 2.5 40 0.17 0.15
2.0 50 3.0 42 0.19 0.16
• Flow Rate: 0.5-10 GPM (1,9-37,8 LPM)
• Operating Pressure Range: 30-70 psi (2,0-4,8 Bar) 60 3.3 43 0.20 0.17
30 2.5 38 0.19 0.17
• Trajectory: 28°
40 2.8 39 0.20 0.18
• Pop-up to nozzle: 4 ½” (114mm) on Lawn Pop-up 2.5* 50 3.2 40 0.22 0.19
• Lawn model comes factory installed with a #2.5 nozzle set at
60 3.5 41 0.23 0.20
90 degrees arc 30 3.6 38 0.28 0.24
• Inlet: 3/4” (20mm) NPT female-threaded 40 4.2 39 0.31 0.27
3.0 50 4.6 41 0.30 0.26
60 5.0 42 0.32 0.27
Additional Features 30 4.4 43 0.26 0.23
• Pressure activated seal and robust trip mechanism 40 5.1 44 0.29 0.25
4.0 50 5.6 46 0.29 0.25
• Standard rubber cover
• Selection of body styles: Lawn Pop-up, Shrub and High-pop 60 5.9 49 0.27 0.24
40 5.9 45 0.32 0.28
• Nozzle tree with 9 standard and 4 low-angle nozzles
50 6.0 46 0.32 0.27
• Stainless steel radius adjustment screw allows up to 25% 6.0 60 6.3 48 0.30 0.26
radius reduction
70 6.7 49 0.31 0.27
40 8.0 42 0.50 0.44
Options Available
50 8.5 45 0.47 0.40
• 102-2024 − Adjustment Tool
8.0 60 9.5 49 0.44 0.48
• CK – Check Valve – maintains up to 6’ (1,8m) elevation 70 10.0 50 0.44 0.49
change Radius shown in feet. Data based on 360°.
• Effluent water indicator *Pre-installed nozzle.
Warranty
Super 800 Low-angle Nozzle Performance Data
• Five years Precipitation Rate
Nozzle psi GPM Radius
(in/hr) ▲ (in/hr) ■
30 1.1 22 0.28 0.24
Super 800 Series Model List 40 1.3 24 0.33 0.28
1.0
50 1.5 26 0.30 0.26
Model Description 60 1.7 28 0.28 0.25
• S800 5” (127mm) Lawn Pop-up w/o Check Valve 30 2.3 29 0.40 0.34
• S800CK 5” (127mm) Lawn Pop-up w/Check Valve 40 2.8 32 0.34 0.29
3.0
• S800E 5” (127mm) Lawn Pop-up w/o Check Val and 50 3.1 35 0.32 0.28
Effluent Cover 60 3.4 37 0.31 0.27
• S800CKE 5” (127mm) Lawn Pop-up w/Check Valve and 30 3.8 31 0.39 0.34
40 4.5 34 0.37 0.32
Effluent Cover 4.0
50 5.1 37 0.36 0.31
• S800S Shrub
60 5.6 38 0.36 0.31
• S800SE Shrub w/Effluent Rubber Cover 30 4.9 38 0.50 0.43
• S800HP 12” (300mm) High Pop with check valve 40 5.8 40 0.51 0.44
• S800HPE 12” (300mm) High Pop w/Check Valve and 6.0
50 6.5 42 0.50 0.44
Effluent Rubber Cover 70 7.2 44 0.49 0.43
Specifying Information—Super 800
S800 XXX-XX-CK-E
Description Body Nozzle Optional Optional
S800 XXX XX CK E
S800—Super 800 Rotor S—Shrub 50—0.50 30—3.0 CK—Check Valve Effluent
P—5" (127mm) Lawn Pop-up 75—0.75 40—4.0
12H—12" (300mm) High-pop 10—1.0 60—6.0
20—2.0 80—8.0
25—2.5
Example: A Super 800 Series Sprinkler with a 5" pop-up height and a 2.5 nozzle, would be specified as: S800P25
41
TR50XT Series
• Radius: 28’-48’ (8,5-14,6m)
The Toro® TR50XT Series Rotor is the ultimate Features & Benefits
sprinkler upgrade! No ¾” (20mm) rotor can
match the feature set of TruArc™ adjustments, X-Flow® Water Shutoff Device
Smart Arc™ memory return in addition to Toro’s Allows one or more sprinklers to be shut-off while all
the others on the same line are still running.
patented X-Flow® and Trujectory™ technologies.
Exclusive Trujectory™ Adjustment
Allows fine-tuning of nozzle spray trajectory - make
adjustments from 5° to 25° to compensate for wind,
low-hanging branches or throwing water from the top
of slopes.
TruArc™ For Easy Arc Set

Eliminates “palming” of a sprinkler to check the final
arc setting—visual arc set from arrow on cap to arrow
on riser.
Smart Arc™ Memory

Safely returns sprinkler to previously set arc if
vandalized, and slip clutch assures no damage to gears.
Standard Reversible Check Valve

Prevents low-head drainage, keeping laterals charged
with water (maintains up to 8’ (2.4m) elevation
change).
Below Grade Installation

Allows for maximum safety helping to eliminate the
potential for tripping accidents or damage caused
by mowers.
Effluent Check SST Riser Water Management Highlight

Options Valve Options
Available Options Available
Available TruJectory™: Accurate Arc
Adjustment without Switching
the Nozzle Set
With Toro’s TruJectory technology you can adjust

anywhere between 5 and 25 degrees without hav-
ing to change out the nozzle. The easy-to-use design
combines the fine-tuning capability that you really
want with what your installation requires. Overthrows
onto hardscapes are eliminated and the integrity of
High the stream remains intact since there is no need for a
diffuser screw.
Low
42
TR50XT Performance Data
Specifications 25° 15° 5°
Nozzle
PSI Flow Precip. Rate* Precip. Rate* Precip. Rate*
Dimensions Size Radius
▲ ■
Radius
▲ ■
Radius
▲ ■
30 1.0 33 0.10 0.09 31 0.12 0.10 28 0.14 0.12
• Body Diameter: 40 1.1 34 0.11 0.09 31 0.13 0.11 29 0.15 0.13
– Lawn Pop-up: 2 3⁄8” (59mm) 1.0
50 1.3 35 0.12 0.10 32 0.14 0.12 30 0.16 0.14
Yellow
– High-pop: 2 ½” (64mm) 60 1.4 36 0.12 0.10 32 0.15 0.13 31 0.16 0.14
• Cap Diameter: 3” (75mm) 70 1.5 37 0.12 0.11 33 0.15 0.13 31 0.17 0.15
• Height: 30 1.1 34 0.11 0.09 32 0.12 0.10 30 0.14 0.12
40 1.4 35 0.13 0.11 32 0.15 0.13 31 0.16 0.14
– Lawn Pop-up: 8” (200mm) 1.5
50 1.6 36 0.14 0.12 33 0.16 0.14 32 0.17 0.15
– High-Pop: 15 7⁄8” (403mm) Orange
60 1.7 37 0.14 0.12 33 0.17 0.15 32 0.18 0.16
70 1.9 38 0.15 0.13 34 0.18 0.16 33 0.19 0.17
Operating Specifications 30 1.6 36 0.14 0.12 34 0.15 0.13 32 0.17 0.15
40 1.9 37 0.15 0.13 34 0.18 0.16 33 0.19 0.17
• Radius: 28-48’ (8,5-14,6m) 2.0
50 2.2 38 0.17 0.15 35 0.20 0.17 34 0.21 0.18
• Flow Rate: 1.0– 9.80 GPM (3,8-37,1 LPM) Red
60 2.4 39 0.18 0.15 36 0.21 0.18 35 0.22 0.19
• Operating Pressure Range: 30-70 psi (2,1-4,8 Bar) 70 2.6 40 0.18 0.16 37 0.21 0.18 36 0.22 0.19
• Trajectory: Adjustable from 5°-25° 30 2.3 37 0.19 0.16 35 0.21 0.18 33 0.23 0.20
• Pop-up to nozzle: 4¾” (120mm) 3.0*
40 2.7 38 0.21 0.18 36 0.23 0.20 34 0.26 0.22
• Inlet: ¾” (20mm) female-threaded Black
50 3.1 39 0.23 0.20 37 0.25 0.22 35 0.28 0.24
60 3.4 40 0.24 0.20 38 0.26 0.23 36 0.29 0.25
– ½” to ¾” (13-20mm) female-threaded on shrub
70 3.6 42 0.23 0.20 39 0.26 0.23 38 0.28 0.24
• ½” (13mm) below grade installation (except shrub model) 30 3.4 38 0.26 0.23 35 0.31 0.27 33 0.35 0.30
Additional Features 4.5

40 4.0 39 0.29 0.25 36 0.34 0.30 34 0.38 0.33
50 4.6 40 0.32 0.28 38 0.35 0.31 36 0.39 0.34
Blue
• Cluster, water-lubricated, gear-drive design 60 5.1 41 0.34 0.29 39 0.37 0.32 37 0.41 0.36
• Standard rubber cover 70 5.6 43 0.34 0.29 40 0.39 0.34 39 0.41 0.35
• Large filter screen to prevent clogging 30 4.4 39 0.32 0.28 36 0.38 0.33 33 0.45 0.39
40 5.1 40 0.35 0.31 37 0.41 0.36 34 0.49 0.42
• Factory installed with a #3.0 nozzle 6.0
50 5.8 41 0.38 0.33 39 0.42 0.37 36 0.50 0.43
• Left arc indicator on cap (arrow) and on body (hash mark), Green
60 6.5 42 0.41 0.35 40 0.45 0.39 38 0.50 0.43
and right trip indicator on black adjusting band 70 7.1 44 0.41 0.35 42 0.45 0.39 40 0.49 0.43
• Dry mode pull-up slot for convenience 30 5.2 40 0.36 0.31 36 0.45 0.39 33 0.53 0.46
• Arc adjustment from 30°-360° 40 6.2 41 0.41 0.35 38 0.48 0.41 35 0.56 0.49
7.5
• Continuous, unidirectional rotation provides uniform water Brown
50 7.1 43 0.43 0.37 40 0.49 0.43 37 0.58 0.50
coverage when set at full circle 60 7.8 44 0.45 0.39 41 0.52 0.45 39 0.57 0.49
70 8.5 45 0.47 0.40 43 0.51 0.44 41 0.56 0.49
• Color-coded nozzle tree with 8 interchangeable nozzles
30 6.1 40 0.42 0.37 36 0.52 0.45 33 0.62 0.54
• Stainless steel radius adjustment screw allows up to
40 7.1 42 0.45 0.39 39 0.52 0.45 36 0.61 0.53
25% radius reduction 9.0
50 8.0 45 0.44 0.38 41 0.53 0.46 38 0.62 0.53
Gray
60 8.9 46 0.47 0.40 42 0.56 0.49 40 0.62 0.54
70 9.8 48 0.47 0.41 44 0.56 0.49 42 0.62 0.53
Warranty
■ Shaded areas represent optimum operating pressure for that nozzle size.
• Five years *Pre-installed nozzle.
Radius shown in feet.
TR50XTP Series Model List

Model Description
• TR50XTP 5” (127mm) Lawn pop-up
• TR50XTPE 5” (127mm) Lawn pop-up, Effluent
• TR50XTS Shrub
• TR50XTSE Shrub, Effluent
• TR50XTHP 12” (300mm) High-pop
• TR50XTHPE 12” (300mm) High-pop, Effluent
• TR50XTPSS 5” (127mm) Lawn pop-up w/Stainless Steel Riser
• TR50XTPSSE 5” (127mm) Lawn pop-up w/
Stainless Steel Riser, Effluent
Specifying Information—TR50XT
TR50XT XXX-XX-E
TR50XT XXX XX E
TR50XT—TR50XT Series Rotor P—Lawn Pop-up 10—1.0 45—4.5 E—Effluent
S—Shrub 15—1.5 60—6.0
HP—High-pop 20—2.0 75—7.5
PSS—Stainless Steel Riser 30—3.0 90—9.0
Example: A TR50XT Series sprinkler with High-pop and a 6.0 nozzle,

would be specified as: TR50XT-HP-60
43
T7 Series
• Inlet Size: 1” (25mm) NPT or BSP
• Radius: 46-83’ (14,0-25,0m)
• Operating Pressure Range: 40-100 psi (2,8 - 7,0 Bar)
The Toro® T7 Rotor is built rugged to withstand Features & Benefits

the harsh conditions and vandalism present in
municipal/government, sports fields and Top Arc Indication
commercial rotor applications. Arc setting indicator on top of the rotor allows for easy
wet or dry adjustments from 45°-360°.
High Efficiency Nozzles

Single port design ensures water is evenly distributed
across the pattern without putting too much water
near the head, which prevents seed from washing
away.
Vandal and Abuse Resistance

Smart Arc™ memory safely returns sprinkler to
previously set arc if vandalized.
Design Solutions and Safety

Standard check valve to prevent low head drainage.
Small exposed diameter reduces possibility of injury on
play areas.
Durability
Heavy duty retract spring and water-lubricated gear
drive. Wiper seal reduces stick-ups and wiper seal leaks.
Standard rubber
cover with arc
indicator from
45°-360° simplifies
installation
and service
Effluent SST Riser

Options Options
Available Available
44
Specifications Press. Flow Rate Precip Rate Precip Rate
Nozzle Radius (FT)
(PSI) (GPM) (in/hr) ▲ (in/hr) ■
Dimensions
• Pop-up height to nozzle: 5” (127mm) 40 46.3 6.81 0.715 0.620
• Body height: 8.8” (223,5mm) 50 48.7 7.41 0.746 0.646
• Rubber cover diameter: 2.2” (55,9mm) 60 49.0 8.10 0.782 0.677
• Body diameter: 2.7” (68,6mm) 7.0 70 50.3 8.90 0.824 0.714
Operating Specifications 80 52.0 9.67 0.827 0.716

90 52.0 10.27 0.845 0.732
• Precipitation rate: .30 -.55 (7,6 - 14,0mm) inches 100 53.3 10.85 0.827 0.716
per hour
40 47.3 7.54 0.759 0.657
• Radius: 46’-83’ (14,0 - 25,0m)
50 50.7 8.25 0.734 0.635
• Flow rate: 6.7-30.6 GPM (25,4-116 LPM)
• Operating pressure range: 40-100 psi (2,8-7,0 Bar) 60 50.3 8.91 0.762 0.660
• Inlet size: 1” (25mm) threaded NPT or 1” (25mm) BSP 9.0 70 52.0 9.81 0.807 0.699
• Nozzle trajectory: 25° 80 53.7 10.49 0.800 0.693
• Arc adjustment: 45°-360° (unidirectional at 360°) 90 53.3 11.20 0.823 0.713
100 54.0 11.83 0.839 0.727
Additional Features
40 50.3 9.95 0.885 0.767
• Standard check valve 50 53.3 10.55 0.902 0.781
• Threaded cap-retained riser assembly 60 56.7 11.53 0.913 0.791
• Variable reversing stator
12.0* 70 59.0 12.54 0.956 0.828
• Seven nozzle sizes from 7-27 GPM (26,5-102 LPM)
80 59.7 13.51 0.993 0.860
• Slip clutch
90 60.7 14.38 1.020 0.883
• Nozzle support/breakup screw
• Riser pull-up feature on top of nozzle base 100 63.0 15.18 1.039 0.900
• Adjustment/pull up tool supplied 40 52.3 13.42 1.062 0.920
• Locking cap screw 50 57.0 14.96 1.061 0.919
60 60.0 15.79 1.044 0.904
Options Available
16.0 70 61.0 17.13 1.094 0.948
• Stainless steel riser 80 63.7 18.41 1.100 0.953
• Effluent indicator 90 64.3 19.64 1.136 0.984
Warranty 100 65.7 20.80 1.166 1.009
40 52.0 16.10 1.275 1.104
• Five years
50 57.3 18.40 1.216 1.053
60 61.0 19.56 1.209 1.047
20.0 70 63.7 21.01 1.256 1.087
80 66.3 22.58 1.188 1.029
90 68.0 23.99 1.225 1.061
100 70.3 25.29 1.253 1.085
40 53.7 15.46 1.272 1.101
T7 Rotor Model List
50 60.3 17.69 1.093 0.946
Model Description 60 63.7 19.76 1.107 0.959
• T7P-02 1” (25mm) Rotor 24.0 70 66.3 21.61 1.138 0.985
• T7P-02E 1” (25mm) Rotor, Effluent Indicator 80 68.3 23.29 1.154 0.999
90 70.0 24.87 1.196 1.036
• T7PSS-02 1” (25mm) Stainless Steel Rotor 100 72.3 26.30 1.160 1.005
• T7PSS-02E 1” (25mm) Stainless Steel Rotor, Effluent
40 55.0 19.37 1.424 1.233
Indicator
50 64.3 21.98 1.157 1.002
60 71.0 23.82 1.051 0.910
27.0 70 72.3 25.67 1.101 0.954
80 73.0 27.34 1.141 0.988
90 74.3 29.03 1.179 1.021
100 75.0 30.52 1.207 1.045
* Pre-installed nozzle
Radius show in feet
Specifying Information—T7 Sprinkler Data based on 180°
T7PSS-02X
Descrip. Optional Thread Optional
T7P SS 02 E
T7P—Sports Rotor SS—Stainless Steel Riser NPT Thread E—Effluent
Example: A T7P sprinkler with a stainless steel riser, would be specified as: T7PSS-02
45
TR70XTP Series
• Radius: 30’-68’ (9,1-20,7m)
In addition to being technologically impressive, Features & Benefits

the advanced Toro® TR70XTP Series rotors are
a sprinkler built for superior performance. With X-Flow® Water Shutoff Device
the same features and broad coverage of TR70P, Allows one or more sprinklers to be shut-off while all
the XT version adds the patented X-Flow® and the others on the same line are still running.
TruJectory™ technologies found in Toro’s
Exclusive Trujectory™ Adjustment
TR50XT Series. Allows fine-tuning of nozzle spray trajectory - make
adjustments from 5° to 25° to compensate for wind,
low-hanging branches or throwing water from the top
of slopes.
Continuous Uni-Directional Rotation

Provides uniform coverage when set at full circle.
Smart Arc™ Memory

Safely returns sprinkler to previously set arc if vandalized,
and slip clutch assures no damage to gears.
Below Grade Installation

Allows for maximum safety helping to eliminate the
potential for tripping accidents or damage caused by
mowers.
Effluent SST Riser Water Management Highlight

Options Options
Available Available
TruJectory Offers Precise Water

Throw and Radius Flexibility
The TR70XTP utilizes Toro’s exclusive TruJectory

technology for a built-in adjustment tool that doesn’t
require changing out the nozzle set. Obstacles such as
wind and hardscapes are no longer a concern.
46
TR70XTP Performance Data —USl
25° 15° 5°
Nozzle Flow Precip. Rate* Precip. Rate* Precip. Rate*
psi Radius Radius Radius
Size ▲ ■ ▲ ■ ▲ ■
40 6.6 38 0.51 0.44 35 0.60 0.52 30 0.82 0.71
50 7.3 40 0.51 0.44 37 0.59 0.51 33 0.75 0.65
7
X T
60 8.1 43 0.49 0.42 40 0.56 0.49 36 0.69 0.60
70 8.8 45 0.48 0.42 42 0.55 0.48 39 0.64 0.56
80 9.4 46 0.49 0.43 43 0.57 0.49 40 0.65 0.57
Orange 90 9.9 48 0.48 0.41 45 0.54 0.47 41 0.65 0.57
The X-Flow® TruJectory™ 100 10.4 49 0.48 0.42 46 0.55 0.47 42 0.66 0.57
shuts off the is included 40 7.4 39 0.54 0.47 36 0.63 0.55 32 0.80 0.70
spray while for making 50 8.1 41 0.54 0.46 38 0.62 0.54 35 0.73 0.64
the system trajectory 9 60 8.7 44 0.50 0.43 41 0.58 0.50 38 0.67 0.58
is running. adjustments 70 9.4 46 0.49 0.43 43 0.57 0.49 40 0.65 0.57
It allows from 5° to 25° 80 10 48 0.48 0.42 44 0.57 0.50 41 0.66 0.57
Red
individual to compensate 90 10.7 49 0.50 0.43 46 0.56 0.49 43 0.64 0.56
sprinkler for wind, 100 11.4 51 0.49 0.42 47 0.57 0.50 44 0.65 0.57
shutoff for low‑hanging 40 9.7 40 0.67 0.58 36 0.83 0.72 32 1.05 0.91
dry nozzle branches or 50 10.5 43 0.63 0.55 40 0.73 0.63 35 0.95 0.83
changes or throwing water 12* 60 11.2 47 0.56 0.49 44 0.64 0.56 38 0.86 0.75
maintenance. onto slopes. 70 12 50 0.53 0.46 46 0.63 0.55 42 0.76 0.65
Black 80 12.9 52 0.53 0.46 49 0.60 0.52 45 0.71 0.61
90 13.8 55 0.51 0.44 51 0.59 0.51 47 0.69 0.60
100 14.7 57 0.50 0.44 53 0.58 0.50 49 0.68 0.59
40 11.9 40 0.83 0.72 36 1.02 0.88 33 1.21 1.05
50 13.3 44 0.76 0.66 40 0.92 0.80 36 1.14 0.99
16 60 14.7 48 0.71 0.61 45 0.81 0.70 39 1.07 0.93
70 16.1 52 0.66 0.57 47 0.81 0.70 43 0.97 0.84
Blue 80 17.2 54 0.66 0.57 50 0.76 0.66 46 0.90 0.78
90 18.3 57 0.63 0.54 52 0.75 0.65 49 0.85 0.73
100 19.4 59 0.62 0.54 54 0.74 0.64 50 0.86 0.75
40 14.2 40 0.99 0.85 36 1.22 1.05 32 1.54 1.33
50 15.8 45 0.87 0.75 40 1.10 0.95 35 1.43 1.24
20 60 17.4 49 0.81 0.70 45 0.96 0.83 37 1.41 1.22
70 19 54 0.72 0.63 48 0.92 0.79 44 1.09 0.94
Specifications Green 80
90
20.2
21.3
56
59
0.72
0.68
0.62
0.59
51
53
0.86
0.84
0.75
0.73
47
50
1.02
0.95
0.88
0.82
Dimensions 100 22.5 61 0.67 0.58 56 0.80 0.69 51 0.96 0.83
40 14.9 41 0.99 0.85 37 1.21 1.05 32 1.62 1.40
• Body Diameter: 2 3⁄8” (60mm) 50 17.1 46 0.90 0.78 41 1.13 0.98 35 1.55 1.34
• Cap Diameter: 3” (76mm) 24 60 18.3 50 0.81 0.70 46 0.96 0.83 38 1.41 1.22
70 19.5 56 0.69 0.60 52 0.80 0.69 45 1.07 0.93
• Height: 9 ¼” (235mm)
Brown 80 20.8 58 0.69 0.60 54 0.79 0.69 48 1.00 0.87
Operating Specifications and Features 90 22 60 0.68 0.59 56 0.78 0.68 51 0.94 0.81
100 23.2 62 0.67 0.58 57 0.79 0.69 52 0.95 0.83
• Radius: 30’ – 68’ (9,1-20,7m) 40 16.6 41 1.10 0.95 38 1.28 1.11 32 1.80 1.56
50 18.9 47 0.95 0.82 42 1.19 1.03 38 1.45 1.26
• Flow Rate: 6.7 – 27.0 GPM (25-102 LPM) 27 60 20.4 51 0.87 0.75 50 0.91 0.79 48 0.98 0.85
• Operating Pressure Range: 40-100 psi 70 21.9 55 0.80 0.70 54 0.83 0.72 53 0.87 0.75
(2,8- 7,0 Bar) Gray 80 23.3 60 0.72 0.62 58 0.77 0.67 55 0.86 0.74
• Trajectory: Adjustable from 5° to 25° 90 24.8 64 0.67 0.58 61 0.74 0.64 58 0.82 0.71
100 26.3 68 0.63 0.55 63 0.74 0.64 59 0.84 0.73
• Pop-up to nozzle: 4 ¾” (121mm)
• Inlet: 1” (25mm) female-threaded *Factory installed nozzle.
• ½” (13mm) below-grade installation
• Check valve maintains up to 10’ (3,0m)
elevation change
TR70XT Series Model List
• Full 5” (127mm) pop-up to clear tall turf
Model Description
Warranty
• TR70XTP-02 5” (127mm) Lawn pop-up
• Five years • TR70XTP-02E 5” (127mm) Lawn pop-up, Effluent
• TR70XTPSS-02 5” (127mm) Lawn pop-up w/Stainless
Steel Riser
• TR70XTPSS-02E 5” (127mm) Lawn pop-up w/Stainless Steel
Riser, Effluent
Specifying Information—TR70XT
TR70XT XXX-XX-E
TR70XT XXX XX E
TR70XT—TR70XT Series Rotor P—Pop-up 7—7.0 20—20.0 E—Effluent
PSS—Stainless Steel 9—9.0 24—24.0
12—12.0 27—27.0
16—16.0
Example: A TR70XT Series sprinkler Lawn Pop-up and a 12.0 nozzle, would be specified as: TR70XTP-12
47
Sports Field Solutions
Challenges of Sports Turf Maintenance:
As a sports field manager, you face unique challenges and goals in landscape maintenance:
Appearance – Making sure your turf looks its best on game day, especially if it will be on national TV.
Playability – Ensuring peak team performance and maximizing player safety, while also minimizing
potential liability.
Turf Health – Maintaining your turf in high-usage, short-recovery-window environments.
Water Use – Keeping the field in good condition while keeping your water costs down.
If your fields are surfaced with artificial grass, your irrigation needs are balanced with the goal of no infield disruption
of the playing surface:
Wash Down – Ensuring sufficient coverage to clean the entire field.
Cool Down – Minimizing playing surface temperatures, especially in summer.
Toro offers a complete line of professional products from control systems to sprinklers and in-field monitoring systems
that work together to provide optimal water-management solutions for all your sports field needs. We want to help
you make your turf the best it can be – that’s why Toro is committed to developing advanced and improved products
that water more accurately, more efficiently, more dependably, and more affordably. Our efforts don’t stop at irriga-
tion, though… from mowers to grooming equipment to aerators, Toro provides a complete sports field maintenance
solution. And, through continued industry efforts like sponsorship of the Sports Turf Managers Association, we look
forward to answering your needs as a sports field manager with innovative solutions for years to come.
Sports Field And Artificial Turf Sprinklers:
T7 Series 640 Series TS90 Series 690 Series TG101 Series

Radius: 46’-83’ Radius: 47’-67’ Radius: 53’-95’ Radius: 87’-108’ Radius: 91’-178’
(14,0-25,0m) (14,0-20,0m) (16,2-29,0m) (26,5-33,0m) (27-54m)
Sports Field Management Solutions:
Sentinel® • PC-based Water Management System

Central Control • Weather-based Runtime Adjustment
(Page #: 108-111) • Advanced Reporting including Water Use & ET
• Flow Monitoring with Automatic E-mail Alert
• Sophisticated Scheduler / Optimizer Program
• Radio, Ethernet, Internet, & Cellular Communications
• Turf Guard® Soil Monitoring System

Turf Guard® • Wireless Soil Monitoring
Soil Monitoring • Soil Moisture, Temperature, & Salinity
System • Web-based Reporting & Analysis
(Page #: 116-117) • Monitor up to 500 Sensors per System
• Ideal for Managing Playability of Sports Fields
For more information and sports field designs using Toro Products visit www.toro.com
48
640 Series
• Radius: 47’-67’ (14,0-20,0m)
Considered the most durable, heavy-duty Features & Benefits

commercial sprinkler available, the Toro® 640
Series is the proven veteran for athletic fields, 35 Years of Reliability
parks, campuses and commercial sites. Once the 640 Series sprinkler goes in the ground, it stays
there. With a stainless steel-encased nozzle assembly and
gear drive design.
Normally Open Valve-In-Head Body

Allows individual head control - the only commercial grade
Toro rotor available with this feature.
Stainless Steel, Engineering Plastic and

Brass Construction
Provide dependable performance in the most
demanding environments.
Standard Check Valve

Prevents low-head drainage and keeps laterals charged
with water.
Effluent Check
Options Valve
Available Options
Available
The 640 installs below grade for increased player safety.
57 49
640 Series
Specifications 640 Series Model List
Standard Arcs with Check-O-Matic
Dimensions
• Body diameter: 2 ½” (65mm) Model Description
• Cap diameter: 3 ¼” (83mm) Body Package
• Body height: Check-O-Matic – 9”(230mm);
Valve-In-head – 10 ½”(267mm) • 640-02 Check-O-Matic, NPT
• Exposed surface diameter when buried ½” below grade: 1¾” • 640-52 Check-O-Matic, BSP
(65mm) Nozzle/Stator Set
Operating Specifications • 641-40 #40 Nozzle & Stator
• Radius: 47’ – 67’ (14-20m) • 641-41 #41 Nozzle & Stator
• Flow Rate: 6.0 – 25.0 GPM (23-95 LPM) • 641-42 #42 Nozzle & Stator
• Operating Pressure Range: 40-90 psi (2,8-6,2 Bar) • 641-43 #43 Nozzle & Stator
• Trajectory: 27° • 641-44 #44 Nozzle & Stator
• Pop-up to nozzle: 2 3/8” (60mm) • 642-40E #40 Nozzle & Stator
• Inlet: 1” female-threaded (25mm) • 642-41E #41 Nozzle & Stator
• Below-grade installation: up to ½” (13mm) • 642-42E #42 Nozzle & Stator
• Check-O-Matic maintains up to 15’ (4,6m) elevation change • 642-43E #43 Nozzle & Stator
• Selection of five nozzles and 12 arcs • 642-44E #44 Nozzle & Stator
• Adjustment screw allows up to 25% radius reduction Drive Assemblies
• 640-090 Drive Assembly, 90 Degrees
Additional Features
• 640-180 Drive Assembly, 180 Degrees
• Standard rubber cover • 640-270 Drive Assembly, 270 Degrees
• Vandal-resistant cap with locking set screw
• Small exposed surface diameter
• Gear-drive design 640 Series Model List
• Basket filter screen
• Stainless steel retraction spring Model Description
Options Available • 640-0XXX Drive Assembly

• 640-10 Body Package, Valve-In-Head
• 995-100 - Valve-In-Head Snap Ring Pliers • 640-20 Body Package, Check-O-Matic
• 995-08 - Valve Removal Tool • 640-XX Nozzle and Stator
• 995-35 - Valve Insertion Tool • 640-XXX Nozzle and Stator, Effluent
• 995-37 - Seal Installation Tool
• 995-42 - Canister Removal Tool Standard Arcs w/Check-O-Matic
• 996-51 - Cap Removal Tool
• 35-0579 - #41 Fast Rotating Stator • 641-02-40 90° Arc, #40 Nozzle
• 35-1011 - #42/43 Fast Rotating Stator • 641-02-41 90° Arc, #41 Nozzle
• Effluent options available • 641-02-42 90° Arc, #42 Nozzle
• 641-02-43 90° Arc, #43 Nozzle
Warranty • 641-02-44 90° Arc, #44 Nozzle
• Five years • 642-02-40 180° Arc, #40 Nozzle
• 642-02-41 180° Arc, #41 Nozzle
• 642-02-42 180° Arc, #42 Nozzle
• 642-02-43 180° Arc, #43 Nozzle
• 642-02-44 180° Arc, #44 Nozzle
• 644-02-40 360° Arc, #40 Nozzle
• 644-02-41 360° Arc, #41 Nozzle
• 644-02-42 360° Arc, #42 Nozzle
• 644-02-43 360° Arc, #43 Nozzle
• 644-02-44 360° Arc, #44 Nozzle
Specifying Information—640
64X X-X-4X-XXX-E
Arc Thread Valve Type Nozzle Special Arc Optional
X X X X XXX E
0—Special Arc 1—90° 0—NPT Thread 1—Normally Open Valve-In-Head 0 045° 148° E—Effluent Model
2—180° 3—270° 5—BSP Thread 2—Check-O-Matic 1 060° 173°
4—360° 2 108° 192°
3 127° 238°
4
Example: A 640 Series Sprinkler with a 90° arc, 40 nozzle and a check valve, would be specified as: 641-02-40
Most 640 sprinklers are available in component parts only. Consult Res/Com Finished Goods Price List for a complete list of sprinklers available as finished goods.
50
640 Series Performance Data
360° 270° 238° 192° 180° 173°

▲ ■ ▲ ■ ▲ ■ ▲ ■ ▲ ■ ▲ ■
40 6.0 47 0.30 0.26 0.40 0.35 0.46 0.39 0.57 0.49 0.60 0.52 0.63 0.54
50 6.7 50 0.30 0.26 0.40 0.34 0.45 0.39 0.56 0.49 0.60 0.52 0.62 0.54
60 7.3 52 0.30 0.26 0.40 0.35 0.45 0.39 0.56 0.49 0.60 0.52 0.62 0.54
40 70 8.0 53 0.32 0.27 0.42 0.36 0.48 0.41 0.60 0.52 0.63 0.55 0.66 0.57
80 8.6 54 0.33 0.28 0.44 0.38 0.50 0.43 0.62 0.53 0.66 0.57 0.68 0.59
90 9.2 55 0.34 0.29 0.45 0.39 0.51 0.44 0.64 0.55 0.68 0.59 0.70 0.61
40 9.5 48 0.46 0.40 0.61 0.53 0.69 0.60 0.86 0.75 0.92 0.79 0.95 0.83
50 10.2 53 0.40 0.35 0.54 0.47 0.61 0.58 0.76 0.60 0.81 0.70 0.84 0.73
60 11.0 54 0.42 0.36 0.56 0.48 0.63 0.55 0.79 0.68 0.84 0.73 0.87 0.76
41 70 11.9 55 0.44 0.38 0.58 0.50 0.66 0.57 0.82 0.71 0.87 0.76 0.91 0.79
80 12.7 56 0.45 0.39 0.60 0.52 0.68 0.59 0.85 0.73 0.90 0.78 0.94 0.81
90 13.4 57 0.46 0.40 0.61 0.53 0.69 0.60 0.86 0.74 0.92 0.79 0.95 0.83
40 12.0 52 0.49 0.43 0.66 0.57 0.75 0.65 0.93 0.80 0.99 0.85 1.03 0.89
50 12.9 55 0.47 0.41 0.63 0.55 0.72 0.62 0.89 0.77 0.95 0.82 0.99 0.85
60 14.0 56 0.50 0.43 0.66 0.57 0.75 0.65 0.93 0.81 0.99 0.86 1.03 0.89
42 70 14.7 57 0.50 0.44 0.67 0.58 0.76 0.66 0.95 0.82 1.01 0.87 1.05 0.91
80 15.8 58 0.52 0.45 0.69 0.60 0.79 0.68 0.98 0.85 1.04 0.90 1.09 0.94
90 16.8 58 0.56 0.48 0.74 0.64 0.84 0.73 1.04 0.90 1.11 0.96 1.16 1.00
40 13.2 56 0.47 0.41 0.62 0.54 0.71 0.61 0.88 0.76 0.94 0.81 0.97 0.84
50 14.5 59 0.46 0.40 0.62 0.53 0.70 0.61 0.87 0.75 0.93 0.80 0.96 0.83
60 15.7 59 0.50 0.43 0.67 0.58 0.76 0.66 0.94 0.82 1.00 0.87 1.04 0.83
43 70 17.0 61 0.51 0.44 0.68 0.59 0.77 0.67 0.96 0.83 1.02 0.88 1.06 0.92
80 18.3 63 0.51 0.44 0.68 0.59 0.77 0.67 0.96 0.83 1.03 0.89 1.07 0.92
90 19.4 64 0.53 0.46 0.70 0.61 0.80 0.69 0.99 0.86 1.05 0.91 1.10 0.95
40 16.7 55 0.61 0.53 0.82 0.71 0.93 0.80 1.15 1.00 1.23 1.06 1.28 1.11
50 18.6 60 0.57 0.50 0.76 0.66 0.87 0.75 1.08 0.94 1.15 1.00 1.20 1.03
60 19.9 61 0.59 0.52 0.79 0.68 0.90 0.78 1.12 0.97 1.19 1.03 1.24 1.07
44 70 21.9 63 0.61 0.53 0.82 0.71 0.93 0.80 1.15 1.00 1.23 1.06 1.28 1.11
80 23.4 65 0.62 0.53 0.82 0.71 0.93 0.81 1.16 1.00 1.23 1.07 1.28 1.11
90 25.0 67 0.62 0.54 0.82 0.71 0.94 0.81 1.16 1.01 1.24 1.07 1.29 1.12
148° 127° 108° 90° 60° 45°

▲ ■ ▲ ■ ▲ ■ ▲ ■ ▲ ■ ▲ ■
40 6.0 47 0.73 0.64 0.85 0.74 1.01 0.87 1.21 1.05 1.81 1.57 2.42 2.09
50 6.7 50 0.72 0.63 0.84 0.73 0.99 0.86 1.19 1.03 1.79 1.55 2.38 2.06
60 7.3 52 0.73 0.63 0.85 0.74 1.00 0.75 1.20 1.04 1.80 1.56 2.40 2.08
40 70 8.0 53 0.77 0.67 0.90 0.78 1.05 0.91 1.27 1.10 1.90 1.65 2.53 2.19
80 8.6 54 0.80 0.69 0.93 0.80 1.09 0.95 1.31 1.14 1.97 1.70 2.62 2.27
90 9.2 55 0.82 0.71 0.96 0.83 1.13 0.98 1.35 1.17 2.03 1.76 2.71 2.34
40 9.5 48 1.11 0.96 1.30 1.12 1.53 1.32 1.83 1.59 2.75 2.38 3.67 3.18
50 10.2 53 0.98 0.85 1.14 0.99 1.34 1.16 1.62 1.40 2.42 2.10 3.23 2.80
60 11.0 54 1.02 0.88 1.19 1.03 1.40 1.21 1.68 1.45 2.52 2.18 3.36 2.91
41 70 11.9 55 1.06 0.92 1.24 1.07 1.46 1.26 1.75 1.52 2.62 2.27 3.50 3.03
80 12.7 56 1.09 0.95 1.27 1.10 1.50 1.30 1.80 1.56 2.70 2.34 3.60 3.12
90 13.4 57 1.11 0.97 1.30 1.12 1.53 1.32 1.83 1.59 2.75 2.38 3.67 3.18
40 12.0 52 1.20 1.04 1.40 1.21 1.64 1.42 1.97 1.71 2.96 2.56 3.95 3.42
50 12.9 55 1.15 1.00 1.34 1.16 1.58 1.37 1.90 1.64 2.85 2.46 3.79 3.29
60 14.0 56 1.21 1.05 1.40 1.22 1.65 1.43 1.99 1.72 2.98 2.58 3.97 3.44
42 70 14.7 57 1.22 1.06 1.42 1.23 1.68 1.445 2.01 1.74 3.02 2.61 4.03 3.49
80 15.8 58 1.27 1.10 1.48 1.28 1.74 1.51 2.09 1.81 3.13 2.71 4.18 3.62
90 16.8 58 1.35 1.17 1.57 1.36 1.85 1.60 2.22 1.92 3.33 2.89 4.44 3.85
40 13.2 56 1.14 0.98 1.32 1.15 1.56 1.35 1.87 1.62 2.81 2.43 3.74 3.24
50 14.5 59 1.13 0.97 1.31 1.14 1.54 1.34 1.85 1.60 2.78 2.41 3.71 3.21
60 15.7 59 1.22 1.06 1.42 1.23 1.67 1.45 2.01 1.74 3.01 2.61 4.01 3.47
43 70 17.0 61 1.23 1.07 1.44 1.25 1.69 1.47 2.03 1.76 3.05 2.64 4.06 3.52
80 18.3 63 1.25 1.08 1.45 1.25 1.71 1.48 2.05 1.78 3.08 2.66 4.10 3.55
90 19.4 64 1.28 1.11 1.49 1.29 1.75 1.52 2.11 1.82 3.16 2.74 4.21 3.65
40 16.7 55 1.49 1.29 1.74 1.50 2.04 1.77 2.46 2.13 3.68 3.19 4.91 4.25
50 18.6 60 1.40 1.21 1.63 1.41 1.91 1.66 2.30 1.99 3.45 2.99 4.60 3.98
60 19.9 61 1.45 1.25 1.68 1.46 1.98 1.71 2.38 2.06 3.57 3.09 4.76 4.12
44 70 21.9 63 1.49 1.29 1.74 1.53 2.04 1.84 2.45 2.76 3.68 3.68 4.91 4.25
80 23.4 65 1.50 1.30 1.74 1.51 2.05 1.78 2.46 2.13 3.70 3.20 4.93 4.27
90 25.0 67 1.50 1.30 1.75 1.52 2.06 1.79 2.48 2.15 3.72 3.22 4.95 4.29
*▲ Precipitation rates are for triangular spacing, shown in inches per hour, calculated at 50% of diameter.
* ■ Precipitation rates are for square spacing, shown in inches per hour, calculated at 50% of diameter.
Note: For the 640, differing arcs cannot be valved together.
51
TS90 Series
• Radius: 53’-95’ (16,2-29,0m)
For big open spaces, the Toro TS90 provides Features & Benefits
unparalleled features and performance into a
single fully adjustable rotor. Trujectory Adjustment from 7° to 30°
Fine tunes nozzle spray height, helps provide true
head-to-head coverage, and compensates for windy
conditions.
Part- And Full-Circle In One Sprinkler

No need to inventory multiple models or service parts
Back Nozzle Capable

Perfect for perimeter of sports fields. Provides the
flexibility for fine-tuning any watering requirement.
Ratcheting Riser
Allows you to adjust the riser position in the body with
no disassembly. Simply pull up the riser and ratchet it
to the precise position you want to water.
Three Nozzle Configuration

Provides better distribution uniformity, nozzle flexibility
and system efficiency.
Constant-Velocity Drive
Provides reliable rotation speed – from sprinkler to
sprinkler.
Effluent
Options
Available
52
Specifications
Dimensions
• Body Height: 10” (254mm)
• Overall Height: 12.5” (317mm)
• Retracted Height: 8.5” (216mm)
• Pop-Up Height: 4” (100mm)
• Exposed Cap Diameter: 2.2” (56mm)
• Radius: 53’-95’ (16,2-29,0m) at 25° trajectory
• Flow Rate: 14.0-61.5 GPM (53-233 LPM)
• Precipitation Rate: .56-.60”/hr (14,2-15,2mm/hr)
• Arc: Full- & Part-circle in one
- Full-circle: 360° unidirectional clockwise rotation
- Part-circle: 40°-330°
• Rotation Speed: 3 minutes ± 30 seconds
• Inlet: 1” (25mm) female-threaded (NPT or BSP)
Additional Features
• Full set of color-coded nozzles that thread directly into
the front.
• Rubber cover and below grade installation
• Check Valve standard – maintains up to 10’ (3m) elevation
• Nozzle options: 9 main, 3 intermediate, 1 inner
Options Available
• Effluent Indicator available: part number 118-0063
• Main Nozzle Tool: 5/8” (16mm) hex socket or Toro Part
• 995-99 Intermediate and Trajectory tool: 5/16” (8mm)
hex socket or Toro Part 995-105
Warranty
5 years
TS90TP Nozzle Performance Data—US

Nozzle Set 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI
Stator Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow
Number Main/Intermediate
(Ft.) (GPM) (Ft.) (GPM) (Ft.) (GPM) (Ft.) (GPM) (Ft.) (GPM) (Ft.) (GPM)
1 Yellow/Blue 53 14.0 54 15.2 55 16.4 55 17.4 54 18.5 56 19.4
2 Blue/Red 102-1939 55 18.8 59 20.5 61 22.1 59 23.6 59 25.0 62 26.3
3 Brown/Orange Yellow - - 57 22.7 60 24.5 61 26.1 63 27.6 68 29.1
4 Orange/Orange - - - - 74 32.7 80 35.1 81 37.0 82 38.9
5 Green/Blue - - - - - - 79 37.7 82 39.9 84 41.8
6 Gray/Blue 102-1940 - - - - - - 82 39.6 86 41.9 87 44.1
7 Black/Orange White - - - - - - 80 43.6 87 46.2 84 48.6
8 Red/Blue - - - - - - 86 48.5 88 51.4 88 54.1
102-1941
9 Beige/Blue - - - - - - 85 55.1 91 58.3 95 61.6
White
Specifying Information—TS90TP
TS90TP-02-X-E
Arc Threads Nozzle Optional
TS90 Series Model List
TS90TP 02 X E
Model Description TS90TP— TS90TP 1” (25mm) 02—NPT 1 6 E—Effluent
Rotor with 2 7 Model
• TS90TP-02-14 #3 nozzle pre-installed; #1, #2 and #4 TruJectory 3 8
4 9
nozzles Included 5
• TS90TP-02-58 #6 nozzle pre-installed; #5, #7 and #8 Example: A TS90 Series sprinkler with TruJectory, NPT threads, and with an
nozzles Included 82’ (25m) radius would be specified as: TS90TP-02-8
53
TG101 Series
• Radius: 91’-178’ (27-54m)
The Toro® TG101-NPT large-radius, gun-style Features & Benefits

sprinkler is ideal for applications that require
long distance throw, such as irrigation solely Innovative Drive System
from the perimeter of sports fields, or for Adjusts automatically, ensuring steady rotation and uniform
coverage at varying pressures.
cleaning and cooling artificial turf.
Excellent Uniformity
Using a single nozzle design (spreader nozzles not required).
Dispersed Jet Upon Start-up

Reduces run-off and over-watering.
Self-adjusting Jet Breaker Device

To vary distribution at lower pressures or to increase close-in
watering.
No Maintenance
The TG101 is maintenance-free.
Energy Savings
The great versatility of the gun is further increased with the dynamic
intermittent jet-breaker. It allows energy savings and reduction of system
operating costs by running an irrigation system at lower pressures.
54 63
Distribution
The unique drive system allows a better stream
diffusion. This greatly reduces furrows and
run-off.
Adjustable Brake Force

The self-adjusting system adapts its brake force
to the existing system pressure. This is essential
for uniform water application.
TG101-NPT Performance Data — 24° Trajectory
Pressure PSI Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle

0.47” (12mm) 0.55” (14mm) 0.63” (16mm) 0.71” (18mm) 0.79” 20mm) 0.87” (22mm) 0.94” (24mm)
Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius
GPM Feet GPM Feet GPM Feet GPM Feet GPM Feet GPM Feet GPM Feet
30 46.7 85.3 61.2 91.5 77.5 97.4 95.5 103.3 115.8 108.6 137.8 113.8
35 52.4 92.8 68.2 99.7 86.7 106.3 107.0 112.5 129.4 118.4 154.1 124.0
40 42.3 91.5 57.2 99.4 74.8 107.0 95.1 113.8 112.3 120.4 141.8 127.0 168.6 132.9
50 45.8 96.8 62.1 105.3 81.0 113.2 102.6 120.7 126.3 127.6 153.2 134.5 182.3 141.1
60 48.9 102.0 66.5 110.9 86.7 119.1 109.6 127.0 135.1 134.5 163.8 141.4 195.0 148.3
65 51.5 106.6 70.4 115.8 92.0 124.7 116.2 132.9 143.5 140.4 171.4 148.0 206.5 155.2
70 54.6 110.9 74.0 120.7 96.8 120.6 122.4 138.1 151.9 146.3 183.1 186.7 217.9 161.4
80 57.2 115.2 77.9 125.0 101.7 134.5 128.5 143.4 158.5 151.6 191.9 159.8 228.5 167.3
90 59.9 119.1 81.0 129.3 106.1 139.1 134.3 148.0 168.5 156.8 200.3 165.0 238.6 172.9
95 62.1 122.7 84.5 133.2 110.5 143.0 139.5 152.6 172.6 161.7 208.7 170.3 248.3 178.5
Note: Products may not be available in all regions.
Please consult your Toro regional manager for availability.
Specifications
• Radius: 91-178 feet (27-54m) No maintenance
• Flow Rate: 42-248 GPM (190-1127 LPM) The TG101 gun is mainte-
• Operating Pressure Range: 40-95 PSI (2,5-6,5 Bar) nance-free. The modern
• Trajectory: 24° design avoids the use of ball
• Two standard nozzle options: 0.63” and .87” (16-20mm) bearings, which can seize at
(additional range of nozzles available for specialty applications) contact with moisture, cause
Additional Features failure.
• Powerful and efficient stream diffusion

• Standard 2” (51mm) NPT thread connection
• High-quality, durable construction
• Full or part-circle operation in one unit
• Adjustable rotation speed
Warranty Specifying Information—TR70XT
• Two years TG101-X-XX
Description ARC Nozzle
TG101 Model List TG101-NPT X XX
Model Description TG101-NPT—TG101 P—Part-circle 16—16.0 24—24.0
Sprinkler F—Full-circle 20—20.0 26—26.0
• TG101-NPT Large Radius Gun-Style Sprinkler,NPT 22—22.0 28—28.0
• TG101 Large Radius Gun-Style Sprinkler,BSP
Example: A TG101 sprinkler, part circle with a 16.0 nozzle,
would be specified as: TG101-P-16
55
690 Series
• Inlet Size: 1½” (37mm)
• Radius: 87’-108’ (26,5-33,0m)
• Operating Pressure Range: 80-150 PSI (5,5-10,3 Bar)
For nearly 40 years the 690 series has set the Features & Benefits
standard for durability and reliability in com-
mercial applications. Extremely rugged, the 690 Artificial Playing Surfaces
Series is constructed of brass, stainless steel and Radius and flow capabilities are perfect for cooling and
rinsing artificial playing surfaces such as football fields.
engineering plastics for unmatched performance
in the most demanding environments.
Electric Valve In Head Models
Provide individual head control that ensures run times
can match differing soil, turf and terrain watering
requirements, pressure regulation to ensure all nozzles
perform at the same pressure and manual ON-OFF-
auto control at the head.
Fixed Arc Drives

Nine fixed arc drive assemblies ensure positive
retention of the coverage area with no arc drift
Balanced Application Rate

Used in single or double row applications these
sprinklers operate at a slower speed over the non-
overlap area and a faster speed over the overlapped
areas to provide a balanced application rate.
Dimensions
• Body diameter: 10” (254mm)
• Body height: 16” (405mm) 690 Series Performance Chart
• Weight: 5.6 lbs. (2,54 kg) Base Nozzle Set Nozzle Set Nozzle Set
Pressure 90 91 92
Operating Specifications psi Radius GPM Radius GPM Radius GPM
• Radius: 87’ – 108’ (26,5-33,0m) 80 87 51.0 96 61.2 100 74.0
• Flow Rate: 51.0 – 82.2 GPM (193-311 LPM) 100 90 57.1 100 73.5 108 82.2
• Operating Pressure Range: 80-150 psi (5,5-10,3 Bar) Radius shown in feet.
• Pop-up height to nozzle: ¾” (20mm) Sprinkler radius of throw per ASAE standard S398.1.
• Inlet: 1 ½” NPT (38mm)
• Check-O-Matic: Maintains 37’ (11,2m) of elevation 690 Series Model List
• Electric Valve-in-head Solenoid: 24V ac, 50/60 Hz
- Inrush: 60 Hz, 0.30 amps Model Description
- Holding: 60 Hz, 0.20 amps • 690 90° Part-circle sprinkler
• All internal components serviceable from the top • 691 180° Part-circle sprinkler
Warranty • 694 Full-circle sprinkler
• 696 2-speed (60°-120°) sprinkler
• Three years • 698 2-speed (180°-180°) sprinkler
69X-0X-XXX
Arc Valve-In-Head Type Nozzle Pressure Regulation*
69X 0X XX X
1—90° 2—180° 4—Full-circle 1—Normally Open Hydraulic 90 8—80 psi
6—Full-circle, 2-speed (60°–120°) 2—Check-O-Matic 91 1—100 psi
8—Full-circle, 2-speed (180°–180°) 6—Electric 92
Example: When specifying a 690 Series Sprinkler with a 180° arc, electric valve-in-head, #91 nozzle, and pressure regulation at 80 psi (5,5 Bars), you would specify: 692-06-918
*Electric models only.
56
Rotor Accessories
Effluent Water Indicators Installation/Adjustment Tools
300 & 340 Mini 8 & S800

Series Series For 640 Series
89-7853 102-2024 995-07
• Lavender cover • Adjustment tool for • VIH pliers
for 300 and 340 Mini 8 and Super
Series Omni nozzle 800 Series models
• Use with part
no. 300‑15
(Omni Nozzle)
T5 Rotor
89-7854 Check
• Lavender cover 995-08
for 300 and 340 Valve Kit • Valve removal tool
Series Omni nozzle 102-7714 • Designed for quick
high‑pop models • 20 valve seals removal of valve
• Use with part per bag assembly from
no. 300‑25 body
(Omni Nozzle)
89-7889 T5/T7 Rotor

• Lavender plug for Tool
300 Series with
fixed-radius 102-6527
nozzles 995-42
• Canister removal
tool for
Nozzles
Super 800
102-2028
• Nozzle tree 996-51
- 25 trees • Cap removal tool
T7 995-37
• Seal installation
102-2633 tool for
• Nozzle tree
995-35
T5 Nozzle • Valve insertion tool
for
Tree Kit • Designed for
102-7712 accurate one‑step
• 20 nozzle trees insertion of valve
per bag assembly and
snap ring
57
Valves Overview
250/260 Series
Model EZ-Flo® Plus TPV Series
254/264 Series
Page Number 60-61 62-63 64-65
.025-30 GPM 0.1- 40 GPM 0.25-30 GPM
Flow range (1-114 LPM) (1-151 LPM) (1-114 LPM)
10-150 PSI Max 10-175 PSI Max 10-150 PSI Max
Operating Pressure (0,7-10 Bar) (0,7-12 Bar) (0,7-10 Bar)
Conditions Electrically-Activated Systems X X X
Hydraulically-Activated Systems 250/260 only
Pin-Type Systems 250/260 only
Effluent Water X X X
Sizes 3/4” (20mm) X 254/264 only
1” (25mm) X X X
1 ¼” (32mm)
1 ½” (40mm)
2” (50mm)
2 ½” (65mm)
3” (80mm)
Configurations Angle X
Anti-Siphon X
Inline/Globe X X X
Inlet/Outlet Threaded (Female) X X 250/260 only
Slip X X
Male X Male X X 254/264 only
Male X Barb X X 254/264 only
Features Manual Flow Control X X X
Pressure Regulation
Internal Bleed X X
External Bleed (Flush) X X X
Optional DC Latching Solenoid X X
Body ABS X
Construction PVC X X
Glass-filled Nylon X
Glass-filled Polypropylene X
Brass
Warranty Three years Five years Two years
58
P-220 P-220 220 Brass Quick Coupler
Model 252 Series
Series Scrubber Series Series
Page Number 66-67 68-69 70-71 72-73 74
Flow range 5.0-90.0 GPM 5.0-300 GPM 80-300 GPM 5.0-350 GPM
(19-340 LPM) (19-1136 LPM) (302-1136 LPM) (19-1325 LPM)
Operating Pressure 10-150 PSI Max 10-220 PSI Max 10-220 PSI Max 10-220 Psi Max
(0,7-10 Bar) (0,7-15,2 Bar) (0,7-15,2 Bar) (0,7-15,2 Bar)
Conditions Electrically-Activated Systems X X X X
Hydraulically-Activated Systems X
Pin-Type Systems
Effluent Water X X X X X
Sizes 3/4” (20mm) X
1” (25mm) X X X X
1 ¼” (32mm) X
1 ½” (40mm) X X X
2” (50mm) X X X X
2 ½” (65mm) X
3” (80mm) X X X
Configurations Angle X X X X
Anti-Siphon
Inline/Globe X X X X
Inlet/Outlet Threaded (Female) X X X X
Slip
Male X Male
Male X Barb
Features Manual Flow Control X X X X
Pressure Regulation X X X
Internal Bleed X X
External Bleed (Flush) X X X X
Optional DC Latching Solenoid X X X
Body ABS X
Construction PVC
Glass-filled Nylon X X X
Glass-filled Polypropylene
Brass X X
Warranty Two years Five years Five years Five years Two years
59
EZ-Flo® Plus Jar-Top Series
• 3/4” (20mm), 1” (25mm)
• Electric
The name says it all – EZ. Easy to install and easy Features & Benefits
to service, these Toro® valves are easy to choose.
Perfect for residential applications, EZ-Flo Plus
valves are available in various configurations Jar-Top Design
providing the flexibility you need. Requires no screws and provides fast and easy
servicing.
PVC, Glass-Filled Nylon and

Stainless Steel Construction
Provides longer life span and leak protection in nearly
any environment.
Double-beaded, Chloramine and

Ozone-Resistant Santoprene®
Diaphragm
Ensures a consistent, leak-proof seal all the way up to
150 psi (10,3 Bar).
In-Line or Anti-Siphon Models

Ample selection for new and retrofit installations.
Optional Flow Control

Adjusts the flow of each zone on a system.
DC Latching
Effluent
Solenoid
Options
Option
Available
Jar-Top for Ease of Use

No screws mean less time
flushing out the system on start-
up. Cleaning the diaphragm area
is uncomplicated as it requires
no tools. EZ-Flo Plus valves are
simple to service – it’s that easy.
60
EZ-Flo® Plus with
DC Latching Solenoid
EZ-Flo valves can be Manual On/Off
ordered with pre-installed
DC Latching solenoids
providing cost and labor
External bleed screw
savings. Perfect for use with
for system flushing
Toro controllers, especially
DDCWP and TDC.
Stainless steel
metering system
Male or female or
slip configurations
Specifications
Dimensions EZ-Flo Plus Series Model List
• Female Globe: 5 1⁄8” H x 3” W x 4” L (130 x 75 x 101mm) AC Solenoids
• Male Globe: 5 1⁄8” H x 3” W x 5 ½” L (130 x 75 x 140mm)
• Anti-Siphon: 6” H x 3” W x 6 7⁄8” L (152 x 75 x 175mm) Model Description
Operating Specifications and Additional Features • EZF-29-03 3/4” (20mm) Electric, NPT, Anti-siphon
• EZF-29-04 1” (25mm) Electric, NPT, Anti-siphon
• Flow Range:
• EZF-20-04 1” (25mm) Electric, Slip
– ¾”(20mm): 0.25 – 20 GPM (0,9-76 LPM)
• EZF-26-04 1” (25mm) Electric, Female NPT
– 1”(25mm): 0.25 – 30 GPM (0,9-113 LPM)
• EZF-21-04 1” (25mm) Electric, Male x Male NPT
• Operating Pressure: 10-150 psi (0,68-10,32 Bar)
• EZF-25-04 1” (25mm) Electric, Male x Barb NPT
• Encapsulated solenoid (102-7053) with captured hex plunger,
• EZF-00-04 1” (25mm) Electric, Slip without flow control
spring and O-ring (24 VAC):
• EZF-06-04 1” (25mm) Electric, Female NPT
- Inrush current, 0.4 amps
without flow control
- Holding current, 0.2 amps
• EZF-01-04 1” (25mm) Electric, Male x Male NPT
• Available with or without flow control
Options Available • EZF-05-04 1” (25mm) Electric, Male x Barb NPT
• DCLS-P — Potted DC Latching Solenoid
• EFF-KIT-60Hz— Effluent Solenoid Assembly and Tag DC Solenoids
• Three years • EZF-20-94 1” (25mm) Electric, Slip, with
• EZF-26-94 1” (25mm) Electric, Female, NPT, with
• EZF-21-94 1” (25mm) Electric, Male x Male NPT with
Friction Loss Data—US
GPM Flow
Size Model • EZF-25-94 1” (25mm) Electric, Male x Barb NPT with
0.25 5 10 15 20 30 DC Latching Solenoid
1" Inline 2.0 3.5 4.0 3.0 3.3 6.2
1" Anti-siphon 2.0 2.1 3.1 2.3 3.8 8.1
3
⁄4" Anti-siphon 2.0 4.2 4.2 4.8 7.6 ––
Specifying Information—EZ-Flo® Plus

EZF X-X-XX
Model Flow Control Body Style Size
EZF X X XX
EZF—EZ-Flo Plus Valve 0—Without 0—1” Slip x Slip 03—3⁄4”(20mm)
2—With 1—1” Male x Male NPT 04—1” (25mm)
5—Male NPT x Barb 94—1” (25mm) with DCLS-P (flow control models only)
6—1” Female NPT
9—Anti-siphon
Example: A 1" (25mm) EZ-Flo Plus Valve with slip configuration and flow control would be specified as: EZF-20-04
61
TPV Series
• 1” (25mm)
• 0.1—40 GPM (0,38-151 LPM)
• Electric
The search for a full-featured yet economically priced, Features & Benefits
residential and commercial valve is over thanks to
Toro’s newest 1” (25mm) valve offering−the TPV Tough Double-Beaded, Chloramine and
Series. These full-featured, rugged, debris-resistant Ozone-Resistant Santoprene® Diaphragm
valves feature flow ranges from 0.1 to 40 GPM Ensures a consistent, leak-proof seal all the way up to
175 psi (12,0 Bar).
(0,38-151 LPM), making them ideal for everything
from drip to high-flow residential and light-
Patented DBS (Debris Bypass System)
commercial applications.
Technology™
Metering system ensures proper functionality, even in
tough environments.
Multiple Body Styles

Choose from various styles to meet any
installation requirement.
Wide Range of Flows and Pressure

One valve for all site specific needs.
Robust Solenoid Design

Ensures reliable opening and closing.
DBS Technology™
DC Latching (Debris Bypass System)
Effluent
Solenoid
Options
Option DBS is a patented vibrating meter-
Available
ing pin and diaphragm assembly
that allows for small particles to
pass through the valve without
clogging.
62
Specifications
Dimensions
• 5 1⁄8” H x 2 ¾” W x 5” L (130 x 70 x 127mm)
• Flow Range: 0.1 to 40 GPM (0,38-151 LPM)
• Operating Pressure: Electric – 10 to 175 psi (0,7-12,0 Bar)
• Burst pressure safety rating: 1000 psi (68,9 Bar) Glue Stop™
• Solenoid: 24 VAC (50/60 Hz) Standard (102-7053) TPV Slip-by-Slip models include this patented feature which
- Inrush: 0.4 amps ensures that the installer cannot block the downstream port of the
- Holding: 0.2 amps valve during installation with primer and cement.
Additional Features
• Rugged, Double-Beaded Santoprene diaphragm
• Patented DBS™ (Debris Bypass System) technology TPV Series Model List
• Operates in low-flow and landscape drip applications
when a filter is installed upstream (see page 145) AC Solenoids
• Built with either AC or DC Latching Solenoids Model Description
• Manual Operation without the use of a controller—Internal
and External Bleed • TPV100 1” (25mm) Female NPT, In-Line, w/o
• Captured hex/Phillips screws FlowControl
• Optional flow control allows precise zone adjustment and • TPVF100 1” (25mm) Female NPT, In-Line, w/Flow
manual shutoff Control
• Encapsulated injection-molded solenoid with a • TPV100MM 1” (25mm) Male Thread x Male Thread,
captured plunger In-Line, w/o Flow Control
• Removable flow control handle to ensure vandal-resistance • TPVF100MM 1” (25mm) Male Thread x Male Thread,
• Slip models feature patented Glue Stop™ In-Line, w/Flow Control
• Self-aligning bonnet permits fast and easy servicing • TPV100S 1” (25mm) Slip x Slip, In-Line,
• Large directional flow arrows w/o Flow Control
• TPVF100S 1” (25mm) Slip x Slip, In-Line,
Options Available w/Flow Control
• EFF-Kit-60Hz - Recycled Water Solenoid Assembly • TPV100MB 1” (25mm) Male Thread x Barb, In-Line,
and Watering Tag w/o Flow Control
• DCLS-P - Potted DC Latching Solenoid Assembly • TPVF100MB 1” (25mm) Male Thread x Barb, In-Line,
w/Flow Control
Warranty
• Five years DC Solenoids
Model Description
• TPVF100DC 1” (25mm) Female NPT, In-Line,
w/ Flow Control, DCLS-P
• TPVF100MMDC 1” (25mm) Male Thread x Male Thread,
In-Line, w/ Flow Control, DCLS-P
• TPVF100SDC 1” (25mm) Slip x Slip, In-Line,
w/Flow Control, DCLS-P
• TPVF100MBDC 1” (25mm) Male Thread x Barb, In-Line,
w/Flow Control, DCLS-P
TPV Friction Loss data—US

GPM Flow .10 .25 5 10 15 20 30 40
PSI Loss 2.0 2.0 3.5 3.9 3.0 3.3 7.0 13
Specifying Information—TPV
TPVF100XXXX
Model Flow Control Size Body Style Optional
TPV F 100 XX XX
TPV—TPV Valve F—With Flow Control 100— 1” (25mm) MM—Male X Male DC—DCLS-P Latching Solenoid
S—Slip
MB—Male X Barb
Example: A 1" (25mm) TPV Valve with slip configuration and flow control would be specified as: TPVF100S
63
250/260 & 254/264 Series
• 3/4” (20mm) and 1” (25mm)
• Electric/Hydraulic
Heavy duty. Hardworking. The Toro® 250/260 Features & Benefits

and 254/264 Series Valves are made to withstand
whatever a large residential or light commercial Heavy-Duty Toro Solenoid
application can dish out. Provides dependable operation and long life.
Optional Flow Control

Adjust the flow of each zone.
Various Inlet and Outlet Choices

Ample selection for new and retrofit installations.
Single-Piece Robust Rubber Diaphragm

For reliable, leak-free closing.
Tough, Glass-Filled Zytel Cap And Body

Durable materials which provide years of reliable
operation.
254 Male x Male Valve
Effluent
Options
3
Available
Effluent Flow
Control Handle
4
5
Ideal for systems using reclaimed
water, this flow control handle is easily 1. Manual bleed screw
viewable from the top of the valve.
2. Optional flow control
3. Single-piece rubber diaphragm
4. Stainless-steel metering pin
5. Tough, glass-filled cap and body
64
Specifications 250/260 Series Model List
Dimensions Female Thread

• 3/4” (20mm): 3” H x 4” W (75 x 101mm) Model Description
• 1” (25mm) 250 & 254 (with flow control): • 250-06-04 1” (25mm) Female NPT, In-line, w/
6” H x 4 ½” W (152 x 114mm) Flow Control
• 1” (25mm) 260 & 264 (w/o flow control): • 260-06-04 1” (25mm) Female NPT, In-line, w/o
4 ½” H x 4 ½” W (114 x 114mm) Flow Control
• 250-00-04 1” (25mm) Female NPT, In-line, Pin-type
Operating Specifications Hydraulic, w/Flow Control
• Recommended flow range: • 250-01-04 1” (25mm) Female NPT, In-line, Normally
– 3/4” (20mm): 0.25 to 15.0 GPM Open Hydraulic, w/Flow Control
– 1” (25mm): 5.0 to 30.0 GPM Male Thread
• Operating Pressure
– 3/4” (20mm): 10 to 150 psi (0,7-10,3 Bar) • 264-06-03 3/4” (20mm) Male Thread x Male Thread,
– 1” (25mm): 20 to 150 psi (1,4-10,3 Bar) In-Line, w/o Flow Control
• Solenoid: 24 VAC • 254-06-04 1” (25mm) Male Thread x Male Thread,
– 3/4” (20mm): Inrush: 0.25 amps, 6.00 VA; In-Line, w/ Flow Control
Holding: 0.19 amps, 4.56 VA • 264-06-04 1” (25mm) Male Thread x Male Thread,
– 1” (25mm): Inrush: 0.30 amps, 7.20 VA; In-Line, w/o Flow Control
Holding: 0.20 amps, 4.80 VA • 254-16-04 1” (25mm) Male Thread x Insert, In-Line,
• Burst Pressure safety rating: 750 psi (51,7 Bar) w/ Flow Control
• 264-16-04 1” (25mm) Male Thread x Insert, In-Line,
Additional Features w/o Flow Control
• Manual flow control adjustable to zero flow
• Self-cleaning, stainless steel metering pin
• External manual bleed
• 18” (5,5m) lead wires (electric) 254/264 Series Friction Loss Data—US
• Single-piece rubber diaphragm GPM Flow
Size Model
• Recycled water flow-control knob available .5 1 2 5 10 15 20 25 30 35 40 45
• Available with or without flow control 3
⁄4" Electric <1.0 <1.0 <1.0 1.5 3.0 6.5
• Low in-rush solenoid 1" Electric 2.0 2.0 2.3 3.1 4.0 5.4 7.0 8.7 10.5
Options Available Note: For optimum sprinkler performance when designing a system,
calculate total friction loss to ensure sufficient downstream pressure.
• 89-7855 - Effluent Water Indicator Valve Flow Control Knob Flow rates are recommended not to exceed 5 psi loss.
Values are listed in psi.
Warranty
• Two years
250/260 Series Friction Loss Data—US

GPM Flow
Size Model
0.5 10 15 20 25 30 40
1" Hydraulic <1.0 1.0 2.0 3.0 4.0 6.0 9.5
1" Electric 4.4 4.5 5.0 5.0 7.0 9.5
Specifying Information—250/260
2X0-0X-04
Flow Control Activation Type Size
2X0 0X 04
5—w/Flow Control 0—Pin-type Hydraulic 04—1” (25mm)
6—w/o Flow Control 1—Normally Open Hydraulic
6—Electric
Example: A 1" (25mm) 250 Series Valve with flow control and electric activation would be specified as: 250-06-04
Note: DC Latching Solenoid not available.
Specifying Information—254/264
2X4-X6-0X
Flow Control Body Style Size
2X4 X6 0X
5—w/Flow Control 0—Male Thread x Male Thread 3—3⁄4” (20mm)
6—w/o Flow Control 1—Male Thread x Barb 4—1” (25mm)
Example: A 1" (25mm) electric 264 Series Valve without flow control with a barb would be specified as: 264-16-04
65
252 Series
• 1” (25mm), 1½” (40mm), 2” (50mm)
• Electric/Hydraulic
• Globe, Angle
Toro® 252 Series valves are built tough and ready Features & Benefits
to withstand the harshest conditions in any
commercial application. With several configurations Heavy-Duty Toro Solenoid
to choose from, 252 Series valves are available in Provides dependable operation and long life.
electric or hydraulic, 1” (25mm), 1.5” (40mm)
and 2” (50mm)globe/angle models with flow High-Grade Construction
control. Made of durable materials to resist wear.
Globe and Angle Configurations

Easy to use in any application.
Fabric-Reinforced Rubber Diaphragm

Provides long-term tear and stretch tolerance.
Water Flow Control Handle

Adjusts the flow of each zone on a system.
Robust ABS Material

Ensures the valve will resist heavy pressure and high
flows without damage.
Effluent
Options
Available External Bleed
The external bleed allows perfect manual operation of

the valve without electrically charging the solenoid.
System flushing can also be accomplished using the
external bleed with debris and other material being
flushed out of the port.
66
Specifications
Dimensions
• 1” (25mm): 6 ¾” H x 4 ½” W (171 x 114mm)
• 1½” (40mm): 7 ¾” H x 6” W (197 x 152mm)
• 2” (50mm): 9 ½” H x 7” W (241 x 178mm)
Globe and Angle In One Valve
• Recommended Flow Range: The all-in-one globe and angle
– 1” (25mm): 5.0 to 20 GPM (19-76 LPM) configuration allows flexibility
– 1½” (40mm): 25 to 70 GPM (114-303 LPM) in design and installation. Angle
– 2” (50mm): 60 to 90 GPM (227-568 LPM) installations allow for less friction
• Operating Pressure: 20 to 150 psi (1,3-10,3 Bar) loss across the piping system
• Solenoid: 24 VAC, 50/60 Hz while globe configurations are
–Inrush: 0.30 amps, 7.20 VA standard in many irrigation
–Holding: 0.20 amps, 4.80 VA systems.
• Burst pressure safety rating: 750 psi (51,7 Bar)
Additional Features
• Globe and globe/angle built into one valve
• Manual flow control
• External manual bleed
• 24” (60cm) lead wires 1 ½”(40mm) and 2”(50mm)
electric or 18” (45cm) lead wires 1”(25mm) electric
• Self-cleaning, stainless steel metering pin (electric)
• Tough, glass-filled bonnet
• Single-piece diaphragm
Options Available
• 89-7855 – Effluent Water Indicator Valve Flow Control 252 Series Model List
Knob
Female NPT In-line/Angle w/Flow Control
Warranty
Model Description
• Two years
• 252-06-04 1” (25mm)
• 252-26-06 1½” (38mm)
• 252-26-08 2” (50mm)
• 252-21-06 1 ½” (38mm) Normally Open
• 252-21-08 2” (50mm) Normally Open
252 Series Friction Loss Data—US

GPM Flow
Size Type Config.
5 10 20 25 30 40 50 60 70 80 100 120 150
Globe 1.0 1.0 2.0 3.0 4.0 5.5 6.5
1½" Hydraulic
Angle 1.0 1.0 1.5 1.5 3.0 4.0 5.0
Globe 1.5 2.0 2.0 3.5 5.0 8.0
2" Hydraulic
Angle 1.0 1.0 1.5 2.0 3.0 5.0
Globe 3.0 4.0 5.0 6.0 7.0 9.5
1" Electric
Angle 2.0 3.5 4.5 4.5 5.0 7.5
Globe 1.5 1.0 2.0 3.0 4.0 5.0 7.0
1½" Electric
Angle 1.5 1.0 1.5 2.0 3.0 3.0 5.0
Globe 2.0 2.0 2.5 3.5 5.5 8.0
2" Electric
Angle 1.0 1.0 2.0 3.0 4.0 5.0
Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.
For optimum regulation performance, size regulating valves toward the higher flow ranges. Flow rates are recommended not to exceed 5 psi (0,3 bar) loss.
■ = Debris-resistant models
252-XX-0X
Model Activation Type Size
252 XX 0X
252—252 Series Valve 06—1” Electric 4—1” (25mm)
21—Normally Open Hydraulic 6—11⁄2” (40mm)
26—11⁄2” or 2” Electric 8—2” (50mm)
Example: A 11⁄2” (40mm) electric 252 Series Valve, would be specified as: 252-26-06
67
P-220 Series
• 1” (25mm), 1½” (40mm), 2” (50mm), 3” (80mm)
• Electric
• Pressure-regulating
• Globe, Angle
For proven reliability in the field, the Toro® P-220 Features & Benefits
Series valves deliver. Constructed of heavy-duty,
glass-filled nylon material, these valves are ready Durable Glass-Filled Nylon
to consistently withstand pressures up to 220 PSI Ensures the P-220 can operate at pressures up to
220 psi (15 Bar).
(15 Bar).
Precise Pressure Control Option
Compact EZReg® dial-design technology (factory or
field installed - no need to remove solenoid).
Internal And External Manual Bleed

Keeps valve box dry and easy to use.
Schrader Valve Pre-Installed

Simple verification of downstream pressure.
Optional Spike-Guard™ Solenoid

Reduces wire size requirements, allows twice as many
valves to run simultaneously on a transformer, and
lowers power costs with a lightning rating exceeding
20,000 volts.
Filter Screen On 2” (50mm)

& 3” Models (75 mm)
Allows for upstream filtration of water to ensure no
clogging occurs inside the valve.
Pressure
Regulator
Effluent Pressure DC Latching
Options Regulation Solenoid The EZReg® module can regulate
Available Option with flows of only 5 GPM (0,3
Bar) with a 1" (25mm) valve
and it only requires 10 psi (0,7
Bar) differential to operate. The
pressure regulator can be easily
and quickly installed—even under
pressure, with no danger of water
geysers.
68
Specifications Additional features
Dimensions • Tough glass-filled nylon and stainless steel construction
• Internal and External bleed
• 1” (25mm): 6 ¾” H x 3 5⁄8”
W (171 x 92mm)
• Pressure regulates in electric or pressure-regulating models
• 1 ½” (40mm): 7 ¼” H x 3 5⁄8” W (184 x 92mm)
• No external tubing for either pressure-regulating model
• 2” (50mm): 9 ½” H x 6 1⁄8” W (241 x 156mm)
• Standard, built-in Schrader-type valve for downstream
• 3” (80mm): 10 ¾” H x 6 1⁄8” W (273 x 156mm)
pressure verification
Operating Specifications • Flow control independent of solenoid
• Self-aligning bonnet to ensure correct installation
• Flow Range: • Self-cleaning, stainless steel metering rod
– 1” (25mm): 5 to 35 GPM (19-114 LPM) • Low-flow capability down to 5 GPM (18,9 LPM) with EZReg
– 1 ½” (40mm): 30 to 110 GPM (114-265LPM) • Low-power requirement for longer wire runs
– 2” (50mm): 80 to 180 GPM (300-530 LPM)
– 3” (80mm): 150 to 300 GPM (568-852 LPM) Options Available
• Operating Pressure:
– Electric – 10 to 220 psi (0,7-15 Bar) • EZR-30 - EZReg, 5–30 psi (0,3-2,1 Bar) Regulator Module
• Pressure regulating: • EZR-100 - EZReg, 5–100 psi (0,3-7,0 Bar) Regulator Module
– Outlet (EZR-30): 5 to 30 psi ± 3 (0,3-2,0 Bar) • EFF-KIT-60Hz - Effluent Water (Lavender) Solenoid Assembly (24
– Outlet (EZR-100): 5 to 100 psi ± 3 (0,3-7,0 Bar) VAC, 60 Hz) and Warning Tag
• Inlet: 10 to 220 psi (0,7-15,0 Bar) • 102-7053 - 24 VAC Solenoid Assembly, 60 Hz, 18” (457mm)
• Minimum pressure differential (between inlet and outlet) Leads, Captive Plunger
for pressure regulation: 10 psi (0,7 Bar) • DCLS-P - Potted DC Latching Solenoid Assembly
• Burst pressure safety rating: 750 psi (51,7 Bar) Warranty
• Body styles:
– Globe/Angle – 1”, 1 ½”, 2”, 3” (25, 40, 50, 75mm) • Five years
female threads
• Spike Guard™ Solenoid: 24 VAC (50/60 Hz) Standard
– Inrush: 60 Hz: 0.12 amps
P-220 Series Model List
– Holding: 60 Hz: 0.1 amps With Pre-Installed
Model Description
• 102-7053 Solenoid: 24 VAC (50/60 Hz) Latching Solenoids
• P220-26-04 1”(25mm) In-line, Angle • P220-26-94
– Holding: 60 Hz: 0.2 amps
• P220-26-06 1½”(40mm) In-line, Angle • P220-26-96
Pressure-Regulated With EZ Reg® With Pre-Installed
Model Description Latching Solenoids
• P220-27-06 1½”(40mm) In-line, Angle • P220-27-96
P-220 Series Friction Loss Data—US

GPM Flow
Size Config.
5 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 225 250 275 300
Globe 4.00 4.20 3.20 4.10 7.20
1"
Angle 4.00 4.20 3.10 2.70 4.80
Globe 1.60 2.30 3.60 5.20 7.00 9.20 11.20 13.60 16.40
11⁄2" Angle 1.30 1.60 2.80 4.00 5.50 7.10 8.90 10.90 13.50
Globe 2.10 2.70 3.30 4.00 4.80 5.60 6.50 7.50 8.70
2"
Angle 1.20 1.60 2.00 2.40 2.80 3.30 3.90 4.40 5.20
Globe 2.50 3.00 4.10 5.30 6.70 8.30 10.10
3"
Angle 1.90 2.40 3.30 4.30 5.50 6.90 8.50
For optimum regulation performance, size regulating valves toward the higher flow ranges.
Flow rates are recommended not to exceed 5 psi loss.
Specifying Information—P220
P220-2X-X-X
Model Activation Type Solenoid Size
P220 2X X X
P220—P-220 Series Plastic Valve 26—NPT, Electric 0—Standard Solenoid 4—1” (25mm)
27—NPT, Pressure-regulated EZR-100 (Standard) 9—DC Latching Solenoid 6—11⁄2”(40mm)
8—2” (50mm)
0—3” (80mm)
Example: A 1” (25mm) P-220 Series plastic electric, pressure-regulating valve would be specified as: P220-27-04
69
P-220 Scrubber Series
• 2” (50mm), 3” (80mm)
• Electric
• Globe, Angle
A true dirty water irrigation valve, able to handle Features & Benefits
chlorine and other chemicals found in reclaimed
and other non-potable water systems. Durable Glass-Filled Nylon
Ensures the P-220 can operate at pressures up to 220
psi (15 Bar).
Active Cleansing Technology (ACT™)

Industry’s first active scrubber valve cleans
continuously whereas competitive valves only clean on
opening and closing.
Fabric-reinforced EPDM Diaphragm

and EPDM Seat
Designed to work in virtually all water applications.
Rugged Internal Plastic And

Stainless Steel Parts
Scrubber fan, nut and metering system are designed
with marine and aerospace plastics and metals which
make them resistant to water treated with chlorines
and ozones.
Precise Pressure Regulation Option

Compact EZReg® dial-design technology ensures
precise downstream pressure for optimizing sprinkler
head performance.
Completely Serviceable and Retrofitable

Diaphragm assembly may be replaced or retrofitted to
previous models.
“Scrubber”
Turbine Filter Surface
ACT™ System
Effluent Pressure DC Latching Patent-pending Active

Options Regulation Solenoid Cleansing Technology – in
Available Option
which the turbine is
constantly rotating to clean
the metering/filtration area.
This ensures that dirt, algae,
chlorines, chloramines and
water treated with ozone
will not impede valve
performance.
70
Specifications Additional features
Dimensions • Tough glass-filled nylon and stainless steel construction
• Internal and External bleed
• 2” (50mm): 9 ½” H x 6 1⁄8”
W (241 x 156mm)
• Pressure regulates in electric or pressure-regulating models
• 3” (80mm): 10 ¾” H x 6 1⁄8” W (273 x 156mm)
• No external tubing for either pressure-regulating model
Operating Specifications • Standard, built-in Schrader-type valve for downstream
pressure verification
• Flow Range: • Flow control independent of solenoid
– 2” (50mm) 80 to 180 GPM (302 to 681 LPM) • Self-aligning bonnet to ensure correct installation
– 3” (80mm) 150 to 300 GPM (568 to 1136 LPM) • Self-cleaning, stainless steel metering rod
• Operating Pressure • Low-flow capability down to 5 GPM (18,9 LPM) with EZReg
– Electric – 20 to 220 psi (1,4 to 15,2 Bar) • 316 nuclear-grade stainless-steel stem for maximum
• Pressure regulating: corrosion resistance
– Outlet (EZR-30): 5 to 30 psi ± 3 (0,3 to 2,1 Bar)
– Outlet (EZR-100): 5 to 100 psi ± 3 (0,3 to 7,0 Bar) Options Available
• Inlet: 10 to 220 psi (0,7 to 15,2 Bar) • EZR-30 - EZReg, 5-30 psi (0,3-2,1 Bar) Regulator Module
• Minimum pressure differential (between inlet and outlet) • EZR-100 - EZReg, 5-100 psi (0,3-7,0 Bar) Regulator Module
for pressure regulation: 10 psi (0,7 Bar) • EFF-KIT-60 Hz - Effluent Water (Lavender) Solenoid Assembly
• Body styles: (24 VAC, 60 Hz) and Warning Tag
– Globe/Angle – 2”(50mm), 3”(80mm) female threads • 102-7053 - 24 VAC Solenoid Assembly, 60 Hz,
• 102-7053 Solenoid: 24 VAC (50/60 Hz) Standard 18” (45,7cm) Leads, Captive Plunger
– Inrush: 60 Hz: 0.4 amps • DCLS-P - Potted DC Latching Solenoid Assembly
Warranty
• Five years
P-220 Scrubber Series Model List

Model Description
• P220S-26-08 P-220, 2” (50mm) with ACT™ System
• P220S-26-00 P-220, 3” (75mm) with ACT™ System
• P220S-27-08 P-220, 2” (50mm) with EZReg® and
ACT™ System
• P220S-27-00 P-220, 3” (75mm) with EZReg® and
ACT™ System
• P220S-KIT-08 2” (50mm) Scrubber diaphragm assembly kit
• P220S-KIT-00 3” (75mm) Scrubber diaphragm assembly kit
P-220S Series Friction Loss Data—US

GPM Flow
Size Config.
80 90 100 110 120 130 140 150 180 200 225 250 275 300
Globe 3.87 4.29 4.41 6.50 7.78 9.30 9.94 12.15
2"
Angle 2.79 3.58 5.69 5.62 6.4 7.35 8.95 9.94
Globe 2.65 3.40 5.10 5.98 6.70 7.73 11.05
3"
Angle 2.10 2.65 4.65 4.30 5.54 6.98 9.95
Specifying Information—P220S
P220S-2X-X-X
P220S 2X X X
P220S—P-220S Scrubber Series Plastic Valve 6—NPT, Electric 0—Standard Solenoid 8—2” (50mm)
7—NPT, Pressure-regulated EZR-100 (Standard) 9—DC Latching Solenoid 0—3” (75mm)
Example: A 2” (50mm) P-220S Series plastic electric, pressure-regulating valve would be specified as: P220S-27-08
71
220 Brass Series
• 1” (25mm), 1¼” (32mm), 1½” (40mm),
2” (50mm), 2½” (65mm),3” (80mm)
• Electric
• Globe, Angle
Built for superior performance under pressure, Features & Benefits

these Toro® heavy-duty brass and stainless steel
valves are rugged and reliable. The debris-resistant Nearly Three Times the Lightning
design is tested and proven under the harshest Protection of Competitive Product
conditions. With a lightning rating exceeding 20,000 volts.
Precise Pressure Control Option

Compact EZReg® dial-design technology (factory or
field installed - no need to remove solenoid).
Dirty Water Resistance

120-mesh, stainless steel filter screen is constantly
flushed by the flow, enabling the use of very dirty
water without clogging and valve closure failure.
External Downstream Manual Bleed

Keeps valve box dry and allows for manually setting
pressure regulation.
Spike-Guard™ Solenoid
Reduces wire size requirements, allows twice as many
valves to run simultaneously on a transformer and
lowers power costs.
Effluent Spike-Guard
Options Standard
Available
Pressure DC Latching Dirty Water Resistance

Regulation Solenoid
Option The 120-mesh, stainless steel filter screen is positioned
on the supply side of the water stream. It is constantly
flushed by the flow, enabling the use of very dirty
Notes: All come with Effluent Sticker and Label. water without clogging. Stainless steel construction of
Compatible with DC Latching Solenoid. both the filter screen and the valve solenoid seat ensure
long component life in all types of water and pressures.
72
Specifications
Dimensions Additional features
• 1”(25mm): 5 ¼” H x 5” W (133 x 127mm) • Diaphragm stem guide
• 1 ¼” (32mm): 6 ½” H x 6” W (165 x 152mm) • 316 nuclear-grade stainless-steel stem for maximum
• 1 ½”(40mm): 6 ½” H x 6” W (165 x 152mm) corrosion resistance
• 2” (50mm): 7 ½” H x 7” W (191 x 178mm) • Pressure regulator can be installed as a service kit without
• 2 ½” (65mm): 8 ¾” H x 8 ½” W (223 x 216mm) draining the main line
• 3” (80mm): 8 ¾” H x 8 ½” W (223 x 216mm) • Pressure regulates in electric and manual modes, serviceable
Operating Specifications under pressure
• Forward-flow design for more precise regulation
• Flow Range: • Standard, built-in Schrader-type valve for downstream
– 1”(25mm): 5 to 40 GPM (19 to 151 LPM) pressure verification
– 1 ¼” (32mm): 20 to 100 GPM (75 to 378 LPM) • Anti-vandal dust cap on pressure-regulating models
– 1 ½”(40mm): 20 to 130 GPM (75 to 492 LPM) • No external tubing for either electric or pressure
– 2” (50mm): 30 to 180 GPM (114 to 681 (LPM) regulating models
– 2 ½” (65mm): 60 to 250 GPM (227 to 946 LPM) • Manual flow control: adjustable to zero flow
– 3” (80mm): 80 to 350 GPM (303 to 1324 LPM) • Tough, double-beaded, fabric-reinforced rubber diaphragm
• Operating Pressure:
– Electric – 10 to 220 psi 1,4 to 15,2 Bar) Options Available
• Pressure regulating:
– Outlet (EZR-30): 5 to 30 psi ± 3 (0,3 to 2,1 Bar) • EZR-30 - EZReg, 5-30 psi (0,3-2,1 Bar) Regulator Module
– Outlet (EZR-100): 5 to 100 psi ± 3 (0,3 to 7,0 Bar) • EZR-100 - EZReg, 5-100 psi (0,3-7,0 Bar) Regulator Module
• Inlet: 10 to 220 psi (1,4 to 15,2 Bar) • EFF-KIT-60 Hz - Effluent Water (Lavender) Solenoid Assembly
• Minimum pressure differential (between inlet and outlet) (24 VAC, 60 Hz) and Warning Tag
for pressure regulation: 10 psi (1,4 Bar) • 102-7053 - 24 VAC Solenoid Assembly, 60 Hz,
• Burst pressure safety rating: 750 psi (51,7 Bar) 18” (45,7cm) Leads, Captive Plunger
• Body styles: • DCLS-P - Potted DC Latching Solenoid Assembly
– Globe valve – 1” (25mm), 1 ¼”(32mm), 1 ½”(40mm), Warranty
2”(50mm) female threads
– Angle valve – 2 ½”(65mm), 3”(80mm) female threads • Five years
• Spike Guard™ Solenoid: 24 VAC (50/60 Hz) Standard
220 Brass Series Model List

Model Description
• 220-26-04 1” (25mm) In-line
220 Brass Series Friction Loss Data—US • 220-26-05 1 ¼” (32mm) In-line
Model Type
GPM Flow • 220-26-06 1 ½” (40mm) In-line
5 10 15 20 30 40 50 60 70 80 100 120 150 170 180 200 250 300 350 • 220-26-08 2” (50mm) In-line
1" Electric 2.0 2.5 1.5 2.5 5.5 8.9 • 220-26-09 2 ½” (65mm) Angle
11⁄4" Electric 4.4 4.7 5.1 5.5 5.8 7.2 • 220-26-00 3” (80mm) Angle
11⁄2" Electric 3.9 4.2 4.6 4.9 5.2 5.5 7.2
Pressure Regulated With EZREG®
2" Electric 1.0 2.0 2.0 2.5 3.0 3.5 6.0 7.5 10.0
2 ⁄2" Electric
1
2.0 2.2 2.3 2.4 2.5 3.0 4.0 4.5 5.5 • 220-27-04 1” (25mm) In-line
3" Electric 2.2 2.4 2.5 3.0 4.0 4.5 5.5 6.5 7.0 7.5 • 220-27-05 1 ¼” (32mm) In-line
Notes: For optimum performance when designing a system, calculate total friction loss to ensure
• 220-27-06 1 ½” (40mm) In-line
sufficient downstream pressure. • 220-27-08 2” (50mm) In-line
■ Flow rates are recommended not to exceed 5 psi loss.
• 220-27-09 2 ½” (65mm) Angle
• 220-27-00 3” (80mm) Angle
With Latching Solenoid
Specifying Information—220 Brass • 220-26-94 1” (25mm) In-line
220-2X-X-X • 220-26-95 1 ¼” (32mm) In-line
• 220-26-96 1 ½” (40mm) In-line
220 2X X X
• 220-26-98 2” (50mm) In-line
220—220 6—NPT, Electric 0—Spike Guard 4—1” (25mm) 8—2” (50mm) • 220-26-99 2 ½” (65mm) Angle
Series 7—NPT, Pressure Solenoid 5—11⁄4”(32mm) 9—21⁄2”(65mm) • 220-26-90 3” (80mm) Angle
Brass regulated 6—Less 6—11⁄2”(40mm) 0—3” (80mm)
Valve (5–100) Solenoid Electric Valves Less Solenoid
9 - DC Latching
Solenoid • 220-26-64 1” (25mm) In-line
Example: A 1" (25mm) NPT pressure-regulated, • 220-26-66 1 ½” (40mm) In-line
220 Series Brass Valve with Spike Guard solenoid, would be specified as: 220-27-04 • 220-26-68 2” (50mm) In-line
Note: 1", 11⁄2" and 2" —globe configuration. • 220-26-60 3” (80mm) Angle
21⁄2" and 3"—angle configuration.
73
Quick Coupler Series
• 3/4” (20mm) and 1” (25mm)
• Standard, Vinyl, Effluent
Toro® Quick Coupler valves are designed for Features & Benefits
durable everyday use in projects requiring quick
remote water access to the mainline water supply. Stainless Steel And Brass Construction
Quick Couplers are also available with metal or vinyl
covers in locking or non-locking options.
Multiple Models To Choose From

There are a variety of one-piece and two-piece models
in ¾” (20mm) and 1” (25mm) sizes, including ACME
thread key connections.
Eliminate Tangled Hoses

The 360-degree hose swivel provides movement
without hose tangling.
Effluent
Options
Available
3⁄4” (20mm) Quick Coupling Valves and 1” Quick Coupling Valves and Accessories
Accessories Model List Model List
Model Description Model Description
• 075-SLSC One-piece, 3⁄4” (20mm) Single Lug, Quick Coupler • 100-SLSC One-piece, 1”(25mm) Single Lug, Quick Coupler
w/Standard Metal Cover w/Metal Cover
• 075-SLK 3⁄4” (20mm) Single Lug Key, with 1⁄2” (12mm) Top • 100-SLVC One-piece, 1” Single Lug, Quick Coupler w/Vinyl
Pipe Thread Outlet Cover
• 075-75MHS 3⁄4” (20mm) NPT x 3⁄4” (20mm) MHT Hose Swivel • 100-SLVLC One-piece, 1” (25mm) Single Lug, Quick Coupler
w/Vinyl Locking Cover
• 100-2SLVC Two-piece, 1” (25mm) Single Lug, Quick Coupler
w/Vinyl Cover
• 100-ATLVC One-piece, 1” (25mm) Quick Coupler w/Acme
Thread and Lavender Locking Vinyl Cover
• 100-2SLLVC Two-piece, 1” (25mm) Single Lug Quick Coupler
w/Lavender Vinyl Locking Cover
Quick Coupler Series Friction Loss Data—US • 100-AK 1” (25mm) Acme Thread, 1” (25mm) Top Pipe
Model GPM Flow Thread Outlet
Number 10 15 20 25 30 35 40 50 60 70 85 100 • 100-SLK Single Lug Key, 1” (25mm) Top Pipe Thread
075-SLSC 1.5 3.1 5.3 8.5 Outlet w/Internal 3⁄4” (20mm) NPT Threads
100-2SLLC 1.1 2.2 3.6 5.7 8.0 • 075-MHS 3⁄4” (20mm) NPT x 1” (25mm) MHT Hose Swivel
Note: For optimum sprinkler performance when designing a system, be sure to calculate • 100-MHS 1” (25mm) NPT x 1” (25mm) MHT Hose Swivel
total friction loss to ensure sufficient downstream pressure. Values listed in psi. • LK Key for Locking Cap
Specifying Information—Quick Couplers

XXX-XXX-XXX
Size Nozzle Optional
XXX XXX XXX
075—3⁄4" (20mm) SL—One-piece, Single Lug SC—Standard Cover
100—1" (25mm) 2SL—Two-piece, Single Lug VC—Vinyl Cover
AT—ACME Thread LVC—Effluent Vinyl Cover
VLC—Vinyl Locking Cover
Example: A 1" (25mm) one-piece, single lug Quick Coupler Valve with a vinyl locking cover, would be specified as: 100-SLVLC
74
Valve Accessories
Solenoids Effluent Water Indicators EZReg® Pressure-
regulation Options
DCLS-P 89-7855
• Potted DC latching • Effluent flow-
solenoid for Toro valves control knob for
used with EZ‑Flo Plus, 254/264, 250/260
TPV, P‑220 or 220 Series and 252 Series
brass valves valves EZR-30 and EZR-100
• Pressure-regulator module for use
with P‑220 and 220 Series valves
• Precise pressure control with dial
EFF-Kit-60Hz design
102-7053 • EZR-30: 5–30 psi (0,3–2,0 Bar)
• Effluent solenoid with warning tag for
• Solenoid assembly for • EZR-100: 5–100 psi (0,3–7,0 Bar)
EZ-Flo Plus, TPV , P-220 or
EZ‑Flo Plus, TPV, P‑220 or
220 Series brass valves
220 Series brass valves
• Captive hex plunger
features
• 24 VAC
• 60 Hz, 18" (0,5m) leads
• Captive hex plunger features

• 24 VAC, 0.40 amp inrush,
SGS 0.20‑amp‑holding
• Spike Guard Solenoid
compatible with EZ-Flo
Plus, TPV, P-220 or RWSG-Kit
220 Series • Effluent sticker
brass valves and tag for P-220
• Inrush 0.2A valves with Spike
• Holding: 0.1A Guard solenoids
• 20,000 volts
lightning rating
LWS 1088501
• Low Wattage Solenoid • Effluent tag for use
compatible with EZ-Flo with Toro or
Plus, TPV, P-220 or 220 competitive valves
Series brass valves
• Inrush 0.2A
• Holding: 0.1A
Valve Wire Sizing Chart

Maximum One-way Distance (in ft.) Between Controller
and Valve Using Spike-Guard™ Solenoid*
Control Wire
Ground Wire
18 16 14 12 10 8 6
18 2040 2520 2940 3280 3540 3720 3860
16 2520 3260 4000 4660 5220 5620 5920
14 2940 4000 5180 6360 7420 8300 8960
12 3280 4660 6360 8240 10100 11800 13180
10 3540 5220 7420 10100 13180 16060 18770
8 3720 5260 8300 11800 16060 20800 25540
6 3860 5960 8960 13180 18700 25540 33080
* Solenoid Model: 24 V ac Pressure: 150 psi
Voltage Drop: 4 V Minimum Operating Voltage: 20 V Amperage (peak) 0.12 A
75
Controller Overview
Model DDC™WP TMC-212 TMC-424E

Page Number 78-79 80-81 82-83
Number of Stations 2, 4, 6, 8 2 to 12 4 to 24
Modular X X
ET-Adjust w/TriComm™
Flow-Sensing X
TMR-1-Compatible X X
Two-wire Decoder
RainSensor -
X X X
Compatible
Number of
3 3 4
Programs
Simultaneous
X
Program Operation
Number of 3 4
16
Start Times Per Program Per Program
Maximum Station
4 Hours 4 Hours 8 Hours
Runtime
Days of the Week
X X X
Programming
Odd/Even
X X X
Programming
Interval
X X X
Programming
ET-Optimized
Programming
Valves Per Station 1 2 2
Battery-Powered X
Armchair™
X X
Programming
Optional High-
X
Surge Protection
Waterproof Indoor/
Enclosure Outdoor
Indoor/Outdoor Indoor/Outdoor
Warranty Two years Three years Five years
76
Model TIS-612 TIS-PRO Custom Command TDC Series
Page Number 86 87 88-89 90-92
Number of Stations 6, 9, 12 12, 24, 36, 48 9, 12, 15, 18, 24, 36, 48 100-200
Modular X
ET-Adjust X X w/TriComm™
Flow-Sensing X
TMR-1-Compatible X X X
Two-wire Decoder X
RainSensor -
X X X X
Compatible
Number of
3 4 4 10
Programs
Simultaneous
X X X X
Program Operation
Number of 2 2
16 60
Start Times Per Program Per Program
Maximum Station
24 Hours 24 Hours 10 Hours 24 Hours
Runtime
Days of the Week
X X X X
Programming
Odd/Even
X X X X
Programming
Interval
X X X X
Programming
ET-Optimized
X X
Programming
Valves Per Station 2 2 2 2
Armchair™
X
Programming
Optional High-
X
Surge Protection
Enclosure Indoor/Outdoor Outdoor Outdoor Outdoor
Pedestal Option X X X
Warranty Five years Five years Five years Five years
77
DDC™WP Series
• 2-, 4-, 6- and 8-Stations
• Battery-powered
• Indoor and Outdoor
Looking for a rugged waterproof controller ideal Features & Benefits
for remote or isolated installations? Toro’s DDCWP
Series controller provides all that and more. Using Fully Waterproof and Submersible
the new potted DC latching solenoid, the DDCWP Submersible up to 6.5’ (2m) per IP-68 standards,
is battery-operated using two 9V batteries. allowing contractors to mount up to an 8-station
controller in a valve box.
Operates DC Latching Solenoids

Controller is compatible with most manufacturers’ DC
Latching solenoids.
Exclusive “Digital Dial” Technology

Simple programming functions.
Unique Power Feature

Verifies sufficient voltage level for turning stations off
before turning any stations on.
Monthly Watering Schedule

Monthly preset option – ideal for automatic runtime
adjustments.
1 = The first month, January

Wired Rain
Sensor
Compatible
10 = 100%. 140% would be designated as 14.
Monthly % Adjust
DDCWP adjusts annual irrigation run time during initial
controller set up. Options include from 0-200% and January
to December scheduling. With easy adjusting for seasonal
watering, water savings is enhanced for all-around intelli-
gent programming.
78
Specifications
Dimensions
• 5 ¾” W x 5” H x 1 15⁄16” D (145 x 126 x 4,9mm)
• Weight: 23.3 oz. (672 grams) without 9V battery
Operating Specifications and Additional Features
• Operating temperature: 0° - 60° C
• Operates using two x 9V alkaline batteries (not supplied)
• Operates one latching solenoid per station and one
latching solenoid-equipped master valve
• Controller is compatible with all Toro valves accepting
latching solenoids (model DCLS-P or equivalent) and
competitive valve models/latching solenoids
• Accepts Toro TRS Wired RainSensor™, Wired Rain/Freeze
and other normally-closed sensors
• Low-battery indicator visible on LCD screen
• Three independent programs and three start times per EZ-Flo® Plus and P-220 valves shown with the DCLS-P Latching
program solenoid which provide cost and labor savings.
• Three scheduling choices by program:
–Seven-day calendar
–1 to 7-day interval
Battery Cap
–Odd/even with 365-day calendar and 31st day exclusion
• Station run times from one minute to four hours in
one-minute increments
• Seasonal adjust by month from 0-200% in
10% increments
• Manual operation by station or program
• Self-diagnostic circuit breaker skips shorted stations
• Up to five-year program retention with on-board coin
battery saves time of day and all programming features
Warranty
• Two years
Easy installation of two 9V batteries with the simple screw on/off

lid. The battery cap provides a dependable leak-proof seal
allowing submersion up to 6.5’ (2m) per IP-68.
Wire Run Lengths for DDCWP

With battery voltage at 9 VDC, maximum recommended wire
DDCWP Series Model List runs for an 8-station DDCWP are:
Model Description Multi-strand Distance
Wire Feet (meters)
• DDCWP-2-9V 2-station
• DDCWP-4-9V 4-station 18 AWG (1,0mm²) 197 (60m)
12 AWG (4,0mm²) 820 (250m)
Specifying Information—DDCWP
DDCWP-X-9V
Description Stations Voltage
DDCWP XX XX
DDCWP—Digital Dial Waterproof Controller 2—2 Stations 6—6 Stations 9V—9 Volt
4—4 Stations 8—8 Stations
Example: An 8 station DDCWP controller would be specified as: DDCWP-8-9V
79
TMC-212 Series
• 2- to 12-Stations
• Modular
Designed for flexibility, the Toro® TMC-212 is the Features & Benefits
ideal controller choice for residential applications.
With station count modularity from 2 -12 stations Station Count Modularity
For flexibility and reduced inventory— modular from 2
and indoor or outdoor models, it’s also one of
to 12 stations in 2-station increments.
the only controllers needed in a contractor’s
inventory. Automatic Short Detection
For circuit protection and faster troubleshooting.
Non-Volatile Memory
Requires no batteries and holds programming for up to
five years.
Scheduling Flexibility
Three independent programs and four start times per
program.
Pump Start Compatibility

Pump Delay and Well Recovery/Station Delay with
Pump-enabled Option.
Rain
Sensor TMR-1 PSS-KIT
Compatible Compatible Compatible
Two-station Modules
Auto-split on
Two-station modules provide station count flexibility and cost- Season Adjust > 100%
effectiveness.
The TMC-212 is designed to
help minimize the potential for
runoff. When Season Adjust is
set > 100%, the TMC-212 will
automatically split station run-
times in half and run two cycles
TSM-02
of the program to minimize the
Standard
effects of extended runtimes
and allow for absorption.
80
Specifications
Dimensions Optional Accessories
• Indoor: 8” W x 8 ½” H x 2” D (203 x 216 x 51mm) • PSS-KIT - Precision™ Soil Sensor Kit
• Outdoor: 13” W x 9 ½” H x 3 ½” D (330 x 241 x 89mm) • TRS – Wired RainSensor
• Weight: • 53853 – Wired Rain/Freeze Sensor
– Indoor – 3 lbs. 4 oz. (1,5 kg) • TWRS/TWRFS – Wireless RainSensor or Wireless Rain/Freeze Sensor
– Outdoor – 5 lbs. 6 oz. (2,4 kg) • TMR-1 – Maintenance Remote
Electrical Specifications
Warranty
• Electrical input power:
– 120 VAC • Three years
– 18 VA maximum (indoor models)
– 20 VA maximum (outdoor models)
– UL, CUL Listed
• Station output power:
– 24 VAC
– 0.50 amps per station maximum
– 0.50 amps pump/master valve
– 0.70 amps total load Advanced Features
• Surge Protection:
– 6.0 KV common mode; 600 V normal mode
Operating Specifications Pump Start Delay provides
• Three programs, four start times per program settable time delay between
• Station run times from one minute to four hours activation of MV/PS and first
• Three Scheduling choices valve to allow for main pressur-
– Seven-day calendar ization. Well Recovery/Station
– 1- to 7-day interval with day exclusion Delay provides settable time
– Odd/even days with day exclusion delay between stations to allow
• Programmable well recovery/station delay from 1 to 60 for slow-closing valves or well
seconds or 1 to 60 minutes refill with selectable MV/PS
• Pump start delay from 1 to 60 seconds Energized during delay.
• Master valve on/off by program
• Automatic split cycle when season adjust is greater than 100%
• Program stacking
• Rain delay from one to seven days
• Hot-swappable station modules
• Compatible with normally open or normally closed
rain sensors
• Operation of two solenoids per station (up to 0.50 amps per TMC-212 Series Model List
station max)
• Indoor and key-lock outdoor models Model Description
• TMC-212-ID 4-station, Indoor
• TMC-212-OD 4-station, Outdoor
Station Modules - Base model includes 4 stations (2 modules)

Model Description
• TSM-02 2-station Expansion Module
Specifying Information—TMC-212
TMC-212-XX
Model Cabinet Type
TMC-212 XX
TMC-212—Toro Controller ID—Indoor OD—Outdoor
Specifying Information—TSM Module

TSM-02
Model Module Description
TSM 02
TSM—Toro Station Module 02—2-station Expansion Module
Example: A 6-station indoor TMC-212 Controller, would be specified as: TMC-212-ID and TSM-02
Note: Base model includes four stations (two modules)
81
TMC-424E Series
• 4- to 24-Stations
• Modular
• Flow-Sensing
The TMC-424E Series takes modularity to a whole Features & Benefits

new level. Toro’s advanced modular technology
combines sophisticated features with simple Station Count Modularity
Station count modularity from 4 to 24 stations using
operation to provide a customizable controller.
4- or 8-station modules for flexibility.
Two Levels of Surge Protection

Standard or High Surge modules provide options to
meet regional lightning protection needs.
Flow-Sensing
Monitor and react to system leaks or breaks.
Up to 4 Master Valve or Pump

Start Connections
Options for connection of up to four Master Valve or
Pump Start Relays utilizing TSM-4F or TSM-8F
modules.
Run Times In Minutes or Seconds

Ability to set run times for less than a minute provides
efficient watering for planter box, misting cycle, nursery,
or syringe cycle needs.
Armchair Programming
Removable Timing Mechanism can be powered by 9V
battery allowing for easy and comfortable programming.
Rain
Sensor TriComm™ PSS-KIT
Flow
Sensor TMR-1
Compatible
Compatible Water Management Highlight
Flow-Sensing for
Greater Water Savings
With flow-sensing capability

that monitors up to three
independent flow sensors, the
controller consistently monitors
for problems and takes action
as needed to isolate breaks or
system issues.
82
Specifications
Dimensions Optional Accessories
• 10¾” W x 10¼” H x 4 5/8” D (273 x 260 x 117mm) • PSS-KIT - Precision™ Soil Sensor Kit
• Weight: Indoor–7.5 lbs. (3,4 kg); Outdoor–7.1 lbs. (3,2 kg) • Tri-Comm™ – Web-based remote management
• TRS – Wired RainSensor
Electrical Specifications • 53853 – Wired Rain/Freeze Sensor
• Input power: • TWRS/TWRFS – Wireless RainSensor or Wireless Rain/Freeze Sensor
– 120 VAC • TMR-1 – Maintenance Remote
– 30 VA (internal and external plug-in type transformer) • TFS-Flow Sensor
– UL, CUL-listed
• Station output power: Warranty
– 24 VAC
• Five years
– 0.50 amps per station maximum
– 0.50 amps pump/master valve
– 1.20 amps total load
• Surge Protection:
– Standard – 6.0 KV common mode; 600 V normal mode
– High Surge – 6.0 KV common mode; 6.0 KV
normal mode Up to 4 Master Valve/PS Connections
Specifications and Features
• Four programs with 16 total start times One on controller terminal
• Three Scheduling choices block and 3 flow-sensing
– Seven-day calendar modules. Any station can be
– 1- to 31-day interval with day exclusion assigned to any MV. Options
– Odd/even days with day exclusion for a single station to activate
• Station run times in minutes or seconds both a controller and flow
• Programmable well recovery/station delay from 1 to 60 module MV/PS connection
seconds or 1 to 60 minutes (e.g., MV and Booster Pump
• Pump start/master valve settable by program and station activation).
• Operate up to three programs simultaneously
• Rain delay from one to 14 days and water budgeting
from 0-200% in 10% increments
• Hot-swappable station modules
• Review feature quickly recaps all program information
• Short detection for faster troubleshooting
• Valve Test mode for quick system checks
• Multi-language capability (English, Spanish, French,
TMC-424E Series Model List
Italian, German and Portuguese)
• Program erase Model Description
• 12/24-hour real-time clock
• Non-volatile memory • TMC-424E-ID* Modular, Indoor
• TMC-424E-OD* Modular, Outdoor
* Base models include TSM-4 (4-station Module)
Station Modules - Base model includes 4 stations

Model Description
• TSM-4H 4-station Expansion Module, High-Surge
• TSM-4F 4-station Expansion Module, Flow-Sensing
• TSM-8H 8-station Expansion Module, High-Surge
• TSM-8F 8-station Expansion Module, Flow-Sensing
Specifying Information—TMC-424
TMC-424E-XX-XX-XX-XX
Model Type Module Description
TMC-424E XX XX-XX-XX
TMC-424E—Toro Controller ID—Indoor 4—4-station, Standard-Surge 8—8-station, Standard-Surge
OD—Outdoor 4H—4-station, High-Surge 8H—8-station, High-Surge
4F—4-station, High-Surge and Flow-Sensing 8F—8-station, High-Surge and Flow-Sensing
Example: A 16-station TMC-424E controller in an indoor cabinet with one flow monitor would be specified as: TMC-424E-ID-8F-8
* Note: Base model comes with one TSM-4 (4-station) included.
83
TIS Family (Intelli-Sense™)
• TIS-612
• TIS-PRO
• ET-Based Irrigation
Now you’re talking seriously smart irrigation! Features & Benefits

Using ET-based technology, Toro® Intelli-Sense
Series controllers ensure landscapes receive the Daily, ET-Driven, Self-Adjusting Runtimes
Complies with most municipal and smart controller
right amount of water – no more, no less. rebate programs.
Patented WeatherTRAK® Scheduling Engine

Determines optimum schedule for your landscaping,
taking into account:
• Sprinkler type, precipitation rate and efficiency
• Plant type and root depth
• Slope and sprinkler location on slope
• Soil type
• Micro-climate
• Usable rainfall
ET Everywhere™ Data Service

Real-time sophisticated modeling system that provides
weather data accurate to the square kilometer.
No Need for Unsightly Weather Stations

Accurate, real-time, ET-based irrigation without the
need for unsightly weather stations or time-consuming
and inconvenient sensor maintenance.
Irrigation Association (IA) SWAT™ Certified

Performance scores were 100% Adequacy and 0%
Watering Excess.
Rain
ET Adjust Sensor
Compatible
Flow
Sensor TMR-1
Compatible Compatible
Intelli-Sense™ Antennas Specifying Information—TIS Antenna

In some installations, an external Antenna will be required for proper TIS-ANT-XX
ET Everywhere™ signal reception. In these locations, an antenna will
Description Model
need to be purchased and installed for TIS-612 Controllers. TIS-PRO
controllers come with pre-installed pancake antennas. An optional TIS ANTXX
antenna amplifier is also available. Contact WeatherTRAK Customer TIS – Toro Intelli- ANT – Bowtie Antenna – For plastic wall mount TIS-612 controllers.
Support for help in identifying antenna needs. Sense ANT02 – Pancake Antenna for Metal Cabinet Mounting.
ANT-AMP-KIT – Optional Antenna Amplification Kit (powered).*
* Antenna Amplifier Kit is available only from WeatherTRAK Customer Support.
84
ET Everywhere™
Intelli-Sense uses WeatherTRAK® scheduling Every day, site-specific

software to automatically calculate the optimum information is gathered
irrigation schedule—based on a series of self- from weather stations,
prompting questions answered upon installation*. transmitted through
satellites and delivered
via ET Everywhere™
to the Intelli-Sense
controller.
Based on the daily

updates, irrigation
schedules are updated
* Variables include: automatically to
• Sprinkler type • Plant type ensure precise water
• Precipitation rate • Root depth amounts are delivered
• Efficiency rate • Micro climate —every time.
• Soil type • Slope factor
2 WeatherTRAK collects specific

data from the satellite and numerous
other weather-tracking sources.
1 Across the US each day,

3 This information is then analyzed
4 Current ET data is then
a vast network of weather and converted to location-specific broadcast to Intelli-Sense
stations transmit weather evapotranspiration (ET) data (accurate controllers (with ET Every-
data to the NOAA satellite to one square kilometer) and transmit- where service enabled) and
ted to the WeatherTRAK wireless adjusts irrigation schedules
network. accordingly.
Specifying Information—ET Everywhere™ Data Service

ETE-XXX-XY
Model Stations Service
ETE XX XX
ETE—ET Everywhere 612—6, 9 or 12 stations 1Y—One Year
PRO—12, 24, 36, 48 stations 2Y—Two Years
3Y—Three Years
5Y—Five Years
Contact WeatherTRAK Customer Service at 1-800-362-8774 for purchase and activation of ET Everywhere Data Service.
85
TIS-612 Series
• 6-, 9-,12-stations Specifications

• ET-Based Dimensions
• Indoor and Outdoor • Indoor models: 7½” H x 6½” W x 3¼” D (190 x 165 x 83mm)
• Outdoor models: 7½” H x 9½” W x 5¾” D
(190 x 241 x 146mm)
• Weight:
- Indoor models: 4 lbs. 8 oz. (2,0 kg)
- Outdoor models: 5 lbs. 6 oz. (2,4 kg)
• Input power: 120 VAC, (60 Hz)
• Station output power:
- 24 VAC (60 Hz)
- 0.50 amps per station maximum
- 0.375 amps pump/master valve
- 1.0 amps total load (TIS-612)
• UL/CSA-listed transformer
• Three independent programs with one start time per program,
with optional second start time per program for high ET days
• Selectable water window
• Scheduling with 365-day calendar:
- Optimized by WeatherTRAK® with day exclusion
- Odd/Even
- Interval (1-31 days)
- Days of Week (1-7 days)
• Three runtime programming options: 1) Automated by
WeatherTRAK; 2) User-set runtimes; 3) User-set runtimes with
ET-adjustment
Rain Flow • Independent station adjust from -50% to +25% in 5% increments
Sensor Sensor • Program stacking or simultaneous operation of two programs
Compatible Compatible • Cycle-and-soak programming allows up to 20 cycles per start time
• 365-day calendar includes optional automatic adjustment for
daylight savings
• Review mode shows schedule and programming for each valve
• Selectable maximum ET value
• Last downloaded ET values include time and date stamp
• Selectable crop coefficients (Kc values) for custom plant types
• Automatic short detection for faster troubleshooting
• Non-volatile memory maintains programming during a power
outage for up to 10 years
TIS-612/240 Series Model List Optional Accessories
Model Description • TIS-ANT - Intelli-Sense Antenna
• TIS-06-ID 6-station, Indoor Mount • TRS – Wired RainSensor
• TIS-06-OD 6-station, Outdoor Mount • 53853 – Wired Rain/Freeze Sensor
• TIS-09-ID 9-station, Indoor Mount • TWRS/TWRFS – Wireless RainSensor or Wireless Rain/Freeze
• TIS-09-OD 9-station, Outdoor Mount Sensor
• TIS-12-ID 12-station, Indoor Mount Warranty
• TIS-12-OD 12-station, Outdoor Mount
• Five years
Specifying Information—TIS-612
TIS-XX-XX
Model Type Cabinet/Accessories
TIS XX XX
TIS—Toro Intelli-Sense 06—6-station Controller 09—9-station Controller ID—Indoor
12—12-station Controller OD—Outdoor
Example: A 12-station, Intelli-Sense (TIS-612) Controller in an outdoor cabinet would be specified as: TIS-12-OD
86
TIS-PRO Series
• 12-, 24-, 36-, 48-Stations Specifications
• Flow-Sensing Dimensions
• ET-Based • 10 ¾” W x 15 ¾” H x 5 ¾” D (273 x 400 x 146mm)
• Outdoor Metal Cabinet • Weight: 21 lbs. 8 Oz (9,8 kg)
• Input power:
- 120 VAC, 50/60 Hz, 0.5A (24 W max.)
• Output (per station):
- 24 VAC, 50/60 Hz, 0.5A (12 VA max.)
• Master Valve/Pump Start Relay Output:
- 24 VAC, 0.5A
• Output (total):
- 24 VAC, 50/60 Hz, 1.5A (36 VA max.)
• UL, CUL-listed
• Four independent programs with two start times and one
24-hour water window
• Scheduling with 365-day calendar:
- Optimized by WeatherTRAK® with day exclusion
- Odd/Even
- Interval (1-31 days)
- Days of Week (1-7 days)
- Days of Week by Month (1-7 days)
TMR-1 Flow • Three runtime programming options: 1) Automated by
Compatible Sensor WeatherTRAK; 2) User-set runtimes; 3) User-set runtimes
Compatible with ET-adjustment
• Independent station adjust from -50% to +25% in 5%
increments
• Watering Day Frequency / Allowable Depletion Adjust
Pedestal Option • Sequential stacking of programs or overlap up to four
programs simultaneously
The TIS-PRO units may be • Manual operation of individual valve stations or all stations from
ordered with either a powder 1-99 minutes in 1-minute increments
coat gray or stainless steel • Compatible with normally closed rain, rain/freeze or wind sensors
pedestal. To order please • Compatible with normally open or normally closed master valves
contact Toro EICON at • Non-volatile memory maintains program in case of power
303-290-1881 outage for up to 10 years.
• Dedicated rain sensor, flow sensor, and master valve terminals
• Review mode provides schedule and program for each
individual station
• Built-in alerts for flow programmimg, hardware and
communications
• Compatible with Toro Flow Sensors – TFS series
• Flow-monitoring capability for high flow, leak detection and
no-flow conditions with ability to exclude station(s)
Optional Accessories
TIS-PRO Series Model List • TIS-PED – Pedestal Mount
• TMR-1 – Toro Maintenance Remote
Model Description • TFS – Toro Flow Sensor
• TRS – Wired RainSensor
TIS-12P-MW 12-station, Metal Wall Mount Cabinet
• 53853 – Wired Rain/Freeze Sensor
• TWRS/TWRFS – Wireless RainSensor or Wireless Rain/Freeze Sensor
TIS-48P-MW 48-station, Metal Wall Mount Cabinet Warranty
• Five years
Specifying Information—TIS-PRO
TIS-XXP-XXX
Model Type Type Cabinet
TIS XX P XXX
TIS—Toro Intelli-Sense 12—12-Station 24—24 Station P - Professional MW—Metal WallMount
36—36-Station 48—48-station PED—Pedestal Mount
Example: A 36-station Intelli-Sense Professional Controller in a Metal Wall Mount Cabinet would be specified as: TIS-36P-MW
87
Custom Command™ Series
• 9-, 12-, 15-, 18-, 24-, 36-, 48-Stations
• Wall- or Pedestal-Mount
With the highest surge protection in its price Features & Benefits
range, the Toro® Custom Command offers
durability and performance in one rugged Versatile Runtimes
Runtimes from one minute to ten hours in one-minute
commercial-grade controller. increments meet the needs of standard or drip
applications.
Independent Programs
Four fully independent programs and 16 start times
that can run concurrently with start time overlap
protection within each program.
High Surge Protection

Highest surge protection in its price range for
lightning-prone areas.
Metal or Plastic Enclosures

Available in wall-mount metal cabinet with optional
metal pedestal, or wall-mount plastic cabinet.
Hand-Held Remote Compatible

Compatible with the Toro TMR-1 Maintenance Remote
for ease of use, troubleshooting, and field
maintenance operation.
TMR-1 Rain
Compatible PSS-KIT
Sensor
Compatible
Compatible
Wired RainSensor or
Wireless Rain/Freeze
sensors will stop irrigation
when it rains or when
temperature drops below
a user-defined point.
88
Specifications Multiple Enclosure Options
Dimensions Metal or plastic cabinets and optional metal pedestals meet a
variety of installation needs.
• Plastic: 11½” W x 57⁄8” H x 85⁄8” D (292 x 149 x 219mm)
• Metal (12-, 15-, 18- and 24-stations):
10 ¾” W x 9 ¾” H x 5 ¾” D (273 x 247 x 146mm)
• Metal (36- and 48-stations):
10 ¾” W x 15 ¾” H x 5 ¾” D (273 x 400 x 146mm)
• Pedestal (CC-PED):
10 ¾” W x 27 7⁄8” H x 3 3⁄8” D (273 x 708 x 86mm)
• Weight
- Plastic: 8 lbs (3,6 kg)
- Metal (12-, 15-, 18-, and 24-station): 14 lbs (6,4 kg)
- Metal (36- and 48-station): 18 lbs (8,2 kg)
• Input Power
- 120 VAC ± 10%, (60 Hz)
- 0.50 amps (24 W) maximum High-Surge Protection
• Station output power
- 24 VAC (60 Hz) With the highest surge protection in its competitive price range,
- 0.50 amps (12 VA) per station maximum a self-diagnostic circuit breaker and a five-year warranty, this
- 0.50 amps (12 VA) pump/master valve controller withstands the test of time.
- 1.25 amps (30 VA) total load
• UL, CUL Listed
• Three selectable watering schedules:
- Seven-day calendar
- Odd/even days with day exclusion
- 31-day interval
• 365-day calendar with automatic compensation for leap year
• Rain delay from one to seven days
• Program stacking for simultaneous operation of one to four
programs (four program stacking only in 36- and
48-station models)
• Season % adjust by month
Custom Command Series Model List
• Individual station manual start and manual start by program
• Independent program erase for each program Wall-Mount Metal Cabinet Wall-Mount Plastic Cabinet
• Master valve/pump start operation selectable by program
• Available in 9-, 12-, 15-, 18-, 24-, 36- and 48-station models Model Description Model Description
• Non-volatile memory retains programmed information in • CC-M12 12-station • CC-P9 9-station
event of power failure • CC-M15 15-station • CC-P12 12-station
• Time and date retention for up to 90 days using 9-volt battery • CC-M18 18-station • CC-P15 15-station
• Self-diagnostic circuit breaker that identifies and overrides • CC-M24 24-station • CC-P18 18-station
faulty stations • CC-M36 36-station • CC-P24 24-station
Optional Accessories • CC-M48 48-station
• PSS-KIT - Precision™ Soil Sensor Kit Metal Pedestal Mount (optional)

• TRS - Wired RainSensor
Model Description
• 53853 – Wired Rain/Freeze Sensor
• TWRS/TWRFS - Wireless RainSensor or Rain/Freeze Sensor • CC-PED Compatible with CC-M12 to CC-M24 models only
• TMR-1 - Maintenance Remote • TIS-PED Compatible with CC-M36 and CC-M48 models only
Warranty
• Five years
Specifying Information—Custom Command
CC-X-XX-PED
Model Cabinet Description Optional
CC X XX PED
CC—Custom Command M—Metal 9—9-stations 12—12-stations PED—Optional Pedestal Mount
P—Plastic 15—15-stations 18—18-stations
24—24-stations 36—36-stations
48—48-stations
Example: A 12-station Custom Command Controller with an internal transformer and metal cabinet would be specified as: CC-M12
89
TDC Series 2-Wire System
• 50—200 Stations
• 1-, 2- or 4-Station Decoders
For an energy efficient, highly cost-effective way Features & Benefits
to irrigate large commercial installations, you’ll
want the TDC Series from Toro®. Using a two- New ISP Decoders
Industry leading surge protections up to 20 KV means
wire path to communicate to buried decoders,
less grounding in the field than competitive products.
the TDC system eliminates high costs associated
with traditional valve wiring, trenching and Advanced Diagnostics
trouble-shooting. The TDC provides true two-way communication
with each decoder in the field, thus providing
communication verification to decoders in the field,
as well as shorted or open solenoid conditions, making
troubleshooting a breeze.
Low-Power Operating Costs

The TDC Decoders operate DC Latching Solenoids
which utilize no power when valves are in operation.
Water Budget
Water budget by controller, by program and by station
(Season Adjust) 0 to 250% in 1% increments.
Simple, Intuitive Programming

Installation and future servicing are quick and simple
thanks to the large LCD display and the industry’s most
intuitive interface.
Rain
Sensor TMR-1 PSS-KIT
Coming Soon:
TriComm™ Compatibility!
(For remote site management)
Key-locking, Front-Entry, Metal Cabinet Stainless Steel Pedestal Option
TDC offers a key-locking

cabinet in both the outdoor
and indoor model controllers. With Toro’s EICON Special
Constructed from heavy-duty Build division, TDC units may
powder-coated metal, this be ordered with a stainless
is a wall-mount cabinet that steel pedestal. To order please
provides superior weather specify CDEC-PED-100 or
and vandalism resistance. CDEC-PED-200.
90
Specifications Modular Design
Dimensions
• Cabinet: 14” W x 13” H x 6” D (356 x 330 x 152mm)
Electrical Specifications Upgrade Module
• Input Power: 120 VAC or 220/240 VAC (50/60 Hz)

• Station Output Power: Up to 38 VAC maximum; 3 amps
maximum output
• Wiring-two wire path: Jacketed, twisted pair 14 AWG to
15,000 ft.
• Wiring-two wire path: Jacketed, twisted pair 16 AWG to
8.450 ft. The base model of the TDC offers 50 stations with capability to easily
• Wiring-decoder to solenoid: Standard pair 14 AWG to add another module allowing up to 200-station control. This is ideal
400 ft. for phased projects. Independently fused wire paths (4 per 100 sta-
Operating Specifications tions = 8 for 200 stations) provide protection to the controller in the
event of a short in field wiring.
• 20 KV surge protection with proper grounding of 10 Ohms
or less at the controller
• 10 independent irrigation programs
• Six start times per program
TDC Series Model List
• Day of the week programming, odd/even,
interval (1-31 days) Metal Pedestal Mount
• 0-255% adjust by controller, by program, by station Model Description
• Day Exclusion (remove a day from standard program)
• Programmable master valve and pump start, by station • CDEC-SA-50 50-station, w/remote connection
• Manual start of each station or entire program • CDEC-SA-100 100-station, w/remote connection
• Non-volatile memory retains programming • CDEC-SA-200 200-station, w/remote connection
• Self-diagnostics circuit breaker skips shorted/open stations • CDEC-PED-100 100-station, Two-wire controller on stain-
• Two-way confirmation of decoder activation less steel pedestal*
• Activate up to 20 solenoids at up to 2.8 miles away • CDEC-PED-200 200-station, Two-wire controller on stain-
• Programmable rain delay up to 31 days less steel pedestal*
* Order through EICON Special Build
• Water window calculator
• 10-digit alpha-numeric zone identification
• Remote-Ready and RainSensor-compatible Two-Wire Station Decoders
• Upgradeable to Sentinel® Central Control Model Description
• Utilizes DC latching solenoids for valve control
• CDEC-ISP-1 1-station w/ integrated surge protection
Optional Accessories (Operates up to two solenoids)
• PSS-KIT Precision™ Soil Sensor Kit • CDEC-ISP-2 2-station w/ integrated surge protection
• DEG-SG-LINE Decoder, Line Surge Protector (Operates up to four solenoids)
• TRS Wired RainSensor • CDEC-ISP-4 4-station w/ integrated surge protection
• 53853 Wired Rain/Freeze Sensor (Operates up to eight solenoids)
• TWRS/TWRFS Wireless RainSensor or Wireless Rain/
Freeze Sensor
• TMR-1-KIT Toro Maintenance Remote
Warranty
• Five years
Specifying Information—CDEC Specifying Information— DEC

Model Description Model Description
CDEC-ISP-1 Single Station Decoder w/ integrated surge protection DEC-SG-LINE Decoder, line surge protector*
CDEC-ISP-2 Two Station Decoder w/ integrated surge protection
CDEC-ISP-4 Four Station Decoder w/ integrated surge protection
*One per 1500 Feet
CDEC-XXX-XXX
Model Cabinet Description
CDEC XXX XXX
CDEC—2-wire Controller w/remote hook up SA—Wall Mount Metal Cabinet 50—50 Stations
PED—Stainless Steel Pedestal* 100—100 Stations
200—200 stations
Example: A TDC Controller with 200 stations would be specified as: CDEC-SA-200
*Order through EICON
91
TDC Series 2-Wire System
Simple and Straight-Forward Controller Interface

Thanks to the simple nature of the user interface, the TDC controller is the most straight-forward decoder controller on
the market. The LCD display is large and backlit. Up, down, left and right arrows make it simple to maneuver through
the display. And every time data is entered it is saved. A Toro exclusive, the TDC dial allows users to scroll through
selections faster and easier– about half the time of competitive units.
Percent Adjust Scheduled Watering Screen
Users can choose to adjust from 0 to At the Schedule Watering Screen, choices
255% of scheduled run time in 1% include a 14-day calendar rolling schedule,
increments. Change all the programs odd/even day watering, interval watering
and stations to the same percent or up to 31 days or a varying weekday/
adjust individual programs or stations weekend schedule.
up or down.
Station Setting Screen Grow In Program
The Station Setting Screen walks users The Grow In program is ideal for systems
through assigning codes. Each decoder laying down new plantings. The program
has a 5-digit address that gets assigned ensures new turf is watered as needed
to an individual station. A 10-digit alpha- and the TDC makes it simple to adjust as
numeric name may also be assigned. sod and plants grow.
Home Screen Run Times
The Home Screen will always display Station run times can be customized
current time and date and list the next choosing a range of stations from the
scheduled start time. Stations that are in menu – instead of having to program
current run time will also be displayed, individually. Selections can also be for
clearly identifying how much watering how many simultaneous stations should
time remains. Alarms will show up for be run at one time.
troubled zones and diagnostic runs
are simple.
92
TDC+ Controllers
• Up to 204 Stations Features & Benefits
• Software programmable
• Two-wire Decoders Software Based Setup And Programming
• Flow Sensor Ready • Each Satellite is shipped with multi-lingual Sentinel WMS
Software and serial cable for direct connection to any
The installation benefits of Two-Wire combined computer
• Instant viewable two-way communication for uploads
with the feature benefits of a Sentinel Controller! and downloads of setup, configuration settings and
EICON Special Build’s latest control system is programs
easy to install and expand. • Easy 5 digit decoder addressing for up to 204 zones
per controller
• Interactive reports detailing alarms, water usage,
and flow graphs
• Program backup and storage
Lower Installation Costs

• Two-Wire installations proven to save money on
materials and labor at 30 zones or above
System Performance
• Operate 16 simultaneous valves up to 2.7 miles (4,3km)
in any direction from the controller
• Flow Sensing and automatic station shut-down, plus
logging of daily, monthly and yearly water use
• UHF radio Hand Held Remote compatible (SHHR)
for extended coverage distance from the controller
Specifications • Rain Sensor and Switch Sensor connection
Dimensions
• Small wall-mount:
14” W x 13” H X 6” D (355 x 330 x 152mm)
• Stainless steel wall-mount:
17 1/8” W x 30 ¾” H x 8 5/8” D (435 x 781 x 219mm)
• Stainless steel pedestal-mount:
17 1/8” W x 34 ½” H x 8 5/8” D (435 x 876 x 219mm)
• Plastic Pedestal-mount:
17” W x 40” H x 16” D (432 x 1016 x 406mm)
• Weight: Sentinel Hand Held Remote Model List
- Small Metal Wall-mount: 21 lbs (9,5 kg)
- Stainless steel wall-mount: 47 lbs (21,3 kg) Model Description
- Stainless steel pedestal-mount: 64 lbs (29,0 kg) • ESB-TDC+ Enhanced Two-Wire Controller
- Plastic Pedestal: 60 lbs (27,2 kg)
TDC Series Model List
Two-Wire Station Decoders
• Input power: 120 VAC or 220/240 VAC (50/60 Hz)
• Station output power: Up to 38 VAC maximum; 3 amps maxi. Model Description
output • CDEC-ISP-1 1-station w/ integrated surge protection
• Wiring two-wire path: Jacketed, twisted pair 14 AWG to (Operates up to two solenoids)
15,000 ft (4572 m ) • CDEC-ISP-2 2-station w/ integrated surge protection
• Wiring two-wire path: Jacketed, twisted pair 16 AWG to (Operates up to four solenoids)
8,450 ft (2575 m) • CDEC-ISP-4 4-station w/ integrated surge protection
• Wiring decoder to solenoid: Jacketed, twisted pair 14 AWG to (Operates up to eight solenoids)
400 ft (122 m)
ESB-TDC+-XXX-XXX
Configuration Station Count Enclosure Type
ESB TDC+ XXX XXX
ESB— EICON Special Build TDC+— Enhanced Two-wire Controller 100— 100 Station Capability WS5 - Small Painted Cabinet WS4 - Medium SS Cabinet
200—200 Station Capability WS2 - SS Wall Mount PS1 - SS Pedestal
93
Sensors Overview
Model PSS-KIT TWRS TWRFS TRS TFS

Page Number 96-97 98 98 99 100
Transmission Range
Up To 500’ Up To 500’ Up To 500’
(Line-Of-Sight)
Rain Sensing X X X
Soil Moisture Sensing X
Freeze Sensing X X
Flow Sensing X
Works With All
X X X X
24V Controllers
Communicates With
X X X
Multiple Receivers
Adjusts Irrigation
Based On Amount Of X
Water Needed
Replaceable Battery X X X
Automatic
X X X
Resetting Bypass
Cycle Delay Feature X
Power Failure Protection X X X
Signal Strength
X X X
Indicator On Receiver
Signal Strength
X
Indicator On Sensor
Multiple Mounting
X X X X
Options
Flow Range 1.2-500 GPM
½”, ¾”, 1”,
Diameter 1 ½”, 2”, 3”, 4”
Warranty 2 Years 5 Years 5 Years 2 Years 2 Years
94
Remotes Overview
Model EZR-KIT TMR-KIT EICON Remote

Page Number 101 102 103
Transmission Range
(Line-Of-Sight) Up to 300 Feet Up to 1.5 Miles Up to 5 Miles
# Of Programmable
Up to 64 Up to 999 Up to 999
Addresses/Pins
Maximum Stations
64 99 96
To Control
Independent Control
X
Of Master Valve Or Pump
Turn Transmitter On Or Off X X X
Turn Station On Or Off X X X
Manual Station Advance X X X
Pause Or Un-Pause
X X
Current Station
2-Minute Test Run X X
Turn On Specific Program X
Compatible With
MRC Version
All 24V Controllers
Connector Harnesses
Available For X X X
Permanent Mount
Individual Receivers
Available For X X X
Permanent Mount
Two-Way Voice
Transmission X
Carrying Case Included X X

Battery Requirement
9V 4 each, AA
For Transmitter
Warranty 1 year 2 years 2 years
95
Precision™ Soil Sensor
• Works with Nearly All Irrigation Controllers
• Up to 500’ (152,4m) Range
Leveraging Toro sensing technology used on high- Features & Benefits

end commercial sites and world-class golf courses
around the globe, the Toro Precision Soil Sensor Works with Nearly All Irrigation Controller
Can be installed on any irrigation controller, including
reduces water waste by continuously measuring competitive models.
moisture levels in the soil and determining when
to allow your controller to water, maximizing Prevents Overwatering
the efficiency of your irrigation system. Continuously measures soil moisture levels and
Communication between the sensor probe and determines when to allow your irrigation controller to
water, making sure just the right amount of water is
receiver is completely wireless, so installation is applied.
quick and easy with no
digging required. No Digging Required
Communication between the sensor probe and the
receiver is completely wireless, with up to a 500’ range
(line of sight). Installation doesn’t disturb the soil,
giving you accurate moisture readings starting as soon
as the sensor is put in the ground.
Automatic Calibration
The sensor will automatically detect the soil type and
adjust all calculations accordingly.
Freeze Detection
The only soil sensor to offer freeze detection that
prevents irrigation when temperatures approach
freezing.
96
How It Works Up to 500’
line of sight
• There are two components to the system - a battery-powered
wireless sensor probe and a receiver that wires into any
irrigation controller’s sensor port.
• Once installed, the sensor calculates field capacity for your soil
(or the maximum amount of water the soil can hold after
excess water has drained away) and sets that as “100%”.
• Any time the moisture level in the soil exceeds field capacity,
the irrigation controller is prevented from watering until the
moisture level falls below the level set in the receiver (default is
50% of field capacity, adjustable by the user).
Dimensions Easy Installation

• Probe body: 5” x 3 3/4” x 3/4”
• Probe spikes: 4 3/4”
• Receiver body: 3” x 3 3/4” x 1 1/2”
• Receiver input power: 24 VAC
1. Hook up the receiver to your
• Probe: Three AA batteries
irrigation controller
Temperature Specifications
• Operating (Probe): 14°F to 170°F (-10°C to 77°C)
• Operating (Receiver): 14°F to 140°F (-10°C to 60°C)
• Storage: -22°F to +149°F (-30°C to 65°C)
Operating Specifications and Additional Features
2. Install the batteries to power
• Sensor receiver hooks up to irrigation controller’s sensor port
up the sensor probe
(if available) or is wired into common wire
• Up to 500’ (152m) range, line of sight
• One sensor per receiver
• Adjustable moisture threshold in 1% increments allows the user
to set the desired moisture level
• Sensor automatically determines soil type and adjusts
calculations accordingly
• Freeze detection prevents irrigation when temperatures
approach freezing 3. Place the probe in the ground
• Smart bypass overrides the sensor for a user-defined length of
time (especially useful during system winterization)
• If the sensor is tripped while the irrigation controller is in
the middle of a watering program, the optional “Cycle Delay”
feature ensures all subsequent zones in the irrigation program
have a chance to get watered before the sensor halts watering
• Multi-color LED on the sensor probe indicates radio Visit www.ecxtra.com to download free software to
signal strength help optimize your irrigation controller’s schedule for
• Sensor probe’s ultra-slim ¾” profile allows it to avoid being the Precision Soil Sensor.
damaged by mowing equipment
• Extra long stainless-steel electrodes measure over 4 inches
down into the soil profile
• Sensor probe’s support stakes hold sensor firmly in place
when installed
• Easily replaceable batteries last up to 2 years with alkaline Specifying Information—
batteries (longer with lithium) To r o P r e c i s i o n S o i l S e n s o r
PSS-KIT Precision Soil Sensor
• Two years (Probe + Receiver)
97
Wireless RainSensor™
• Rain or Rain/Freeze Sensor
• 500’ (152,4m) Range
No wires. No hassle. Just reliable rain sensing that Features & Benefits
provides optimum water savings. Toro® innovative
wireless technology provides easy to use, advanced Smart Bypass™
features for prompt reaction when it starts to rain. Allows for system override at any time and resets
automatically.
Rain/Freeze Combination
Features digital programmable accuracy – a first in the
industry – The Freeze shutoff can be set from 35°–45°F
(2°C–7°C) in 2° (0,5°C) increments.
Specifications
Dimensions
• Transmitter: 1 ¾” W x 3 ½” H x 1 ¾” D (44 x 89 x 44mm)
• Receiver: 2” W x 4” H x 1 ¾” D (51 x 102 x 44mm)
• Weight: 0.78 lbs. (0,4 kg) product and carton
• Transmitter Power: Two replaceable lithium cells
(CR2032-3V)
• Receiver Power Source: 22-28 VAC/VDC, 100mA Water Conservation Modes
(from existing timer or optional tranformer)
• Relay contacts output: Normally-opened or normally-closed; Selectable water conservation modes delay resumption of
3A @ 24VAC irrigation by intelligently extending beyond mechanical reset
• FCC, IC, AVA, UL, CUL, CE and C-tick approved time and can save you up to 30%* more water.
Specifications and Features * Savings vary based on sensor setting, watering schedule and
other conditions.
• Operating temperature: -20° F to 120° F (-28°C– 49°C)
• Housing material: Weather and UV resistant engineered polymer
• Transmitting range: up to 500’ (152m) (line-of-sight) with
adjustable antenna First LCD In A Wireless Rainsensor
• Sensor: maintenance free hygroscopic disks; adjustable rain
sensitivity: 1/8” to 3/4” (3,2-20mm)
• Low battery indicator
• Signal strength indicator/scale
• Rain delay feature that works intelligently with the rain sensor
(unlike most controller-based rain delays)
• Fail-safe modes in the event of loss of communications or failed
sensor
• Real-time outside temperature displayed on the LCD
(TWRFS only)
• Five year easy to replace, standard coin batteries
• Versatile mounting options – one-piece Quick-Clip™ gutter Provides informative system feedback including outside
bracket or ½”(13mm) conduit adapter temperature, and transmitter signal strength and
• Can control multiple receivers/controllers with one sensor battery life.
transmitter
Warranty
• Five years Specifying Information
Model Description
TWRS Toro Wireless RainSensor
TWRFS Toro Wireless Rain/Freeze Sensor
98
Wired RainSensor™
• Wired Rain and Rain/Freeze Sensor Features & Benefits
• Normally-Open or Normally-Closed
Compatible With All Toro And Other
When it rains sometimes all you need is a simple Manufacturers’ Controllers
sensor that ensures the job gets done. With Universal Normally Open and Normally Closed operation for
multiple set-points for adjustable rain sensitivity compatibility with all controllers that are designed to accept a
sensor device.
and maintenance-free sensing disks, Toro’s TRS
provides the reliability required.
Maintenance Free Hygroscopic Discs
Industry standard sensing discs with adjustable rain shut-off
indexes at 1/8” (3,2mm), 1/4” (6,4mm), 1/2” (12mm) and 3/4”
(17mm) of rain.
25 Feet Of UV-Resistant Cable

Includes 25 feet (7.6m) of white outdoor-rated, UV-resistant
cable.
Three Mounting Options:
Quick Clip gutter Wall mount Conduit adapter

bracket
Specifications
Dimensions
• Transmitter: 1¾” W x 3½” H x 1¾” D (44 x 89 x 44mm)
• Weight: 0.80 lbs (0,4 kg) product and carton
• Relay contacts output, normally open or normally closed:
3A, 24 VAC
• Operating temperature: -20° F to 120° F (-28°C– 49°C)
• Low profile design and UV-resistant housing for sensor
• No special tools required for installation
Warranty
• Two years
Wired Rain/Freeze Sensor

New Wired Rain/Freeze Sensor automatically suspends irriga-
tion when the temperature drops below 37° F (2,8°C) saving
piping networks and irrigation components.
Model Description
TRS Toro Wired RainSensor
53853 Toro Wired Rain/Freeze Sensor
99
TFS (Flow Sensors)
• ½” , ¾” ,1” , 1½” , 2” , 3”, 4” Plastic Tee Sizes
(12mm, 20mm, 25mm, 37mm, 50mm, 75mm, 100mm)
• 1.2 GPM to 500 GPM (4,5-1892 LPM)
Specifications
• Simple impeller-based design
• Potted electronics designed for valve box or underground
Features & Benefits applications
• Sensor pre-installed in tee
Effective Flow Monitoring Even In Flows • Removable sensor design for easy replacement without
removal of tee
Less Than 5 GPM (19 LPM) • Socket end tee
Effective in ranges from 1.2 GPM to 500 GPM • Output: 2-wire, unscaled pulse – pulse width 5msec
(4,5-1892 LPM). Teamed with the Toro TMC-424, ½”, +/- 25%
¾” and 1” (12mm, 20mm, 25mm) sensors provide • Frequency: 3.2 to 200 Hz
a cost-effective flow monitoring and alarm system. • Pressure Rating:
- 1/2”, 3/4” and 1”(13, 20 and 25mm): up to 150 psi (10,3 Bar)
- 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm):
Compatible With Competitive Controllers up to 100 psi (6,8 Bar)
In addition to the TORO compatible controllers – • Temperature Rating: Up to 140º F (60º C)
TDC+, TMC-424E, TIS-PRO and Sentinel® – these flow • Flow Range (Velocity):
- 1/2”, 3/4” and 1”(13, 20 and 25mm):
sensors work with any controller or control system
2’-20’ (0,6-6,0m) per second
compatible with frequency output flow sensors (pulses - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm):
per second proportional to flow velocity). 0.5’-30’ (0,1-9,1m) per second
• Tee:
- 1/2”, 3/4” and 1”(13, 20 and 25mm): Schedule 40 PVC
- 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm):
Schedule 80 PVC
• Sensor Housing: Potted, PPS
TFS Series Model List • Impeller:
Suggested Operating - 1/2”, 3/4” and 1”(13, 20 and 25mm): 300SST
Model Description Range: - 1 ½”, 2”, 3” and 4”(37, 50, 75, and 100mm):
• TFS-050 1/2” (13mm) Flow Sensor 1.2-12 GPM (4,5-45 LPM) Glass-filled nylon
• TFS-075 3/4” (20mm) Flow Sensor 2.7-28 GPM (10,2-65 LPM) • Shaft: Tungsten Carbide
• TFS-100 1” (25mm) Flow Sensor 5-50 GPM (18,9-189 LPM) • Bearing: UHMWPE
• TFS-150 1½” (37mm) Flow Sensor 5-100 GPM (18,9-379 LPM) • Wires: 18AWG direct burial shielded cable
• TFS-200 2” (50mm) Flow Sensor 10-200 GPM (38-757 LPM) Warranty
• TFS-300 3” (75mm) Flow Sensor 20-300 GPM (76-1135 LPM)
• TFS-400 4” (100mm) Flow Sensor 40-500 GPM (151-1892 LPM) • Two years
Specifying Information—TFS
TFS-XXX
Model Configuration
TFS XXX
TFS—Flow Sensor 050—1/2” (13mm) Plastic Tee 200—2” (50mm) Plastic Tee
075—3/4” (20mm) Plastic Tee 300—3” (75mm) Plastic Tee
100—1” (25mm) Plastic Tee 400—4” (100mm) Plastic Tee
150—1 1/2” (37mm) Plastic Tee
100
EZ-Remote®
• Up to 300’ Range (91,44m) Specifications
• Uses Single 9V Battery Specifications and Features
• Compatible with: TMC-212, TMC-424E and Custom
Command
Simple and straight-forward, the Toro® EZ Remote is a • 160’ to 300’ (49 to 91m) range (range varies based on site
tool for the homeowner or maintenance crew that desires and atmospheric conditions)
effortless, handheld controller operation. • Low-battery indicator
Warranty
• One-year
EZ-Remote Series Model List

Model Description
• EZR-KIT Remote Transmitter/Receiver
• EZR-T Remote Transmitter Kit
• EZR-R Remote Receiver Kit
• EZR-CA03 Remote 40” (102cm) Cable Harness Kit
• EZR-CA25 Remote 25’ (63cm) Cable Harness Kit
Specifying Information—EZ-Remote
EZR-XXXX
Model Description
EZR XXXX
EZR—EZ-Remote KIT—EZ-Remote Complete Kit* T—EZ-Remote Transmitter only R—EZ-Remote Receiver only
Example: A complete EZ-Remote kit would be specified as: EZR-KIT

* Includes receiver, transmitter and 40" harness kit.
Electric-Hydraulic Specifications
Dimensions
Converters • 4-Station: 8 ¾” W x 4 ½” H x 2 ½” D (222 x 114 x 64mm)
• 12-Station: 8 ¾” W x 12 ½” H x 2 ½” D (222 x 318 x 64mm)
• 16-Station: 8 ¾” W x 16 ½” H x 2 ½” D (222 x 419 x 64mm)
Toro® Electric-Hydraulic Converters Electrical Specifications
(EHC) provide the ability to bring • Input power:
together electrical outputs from - 24 VAC (60 Hz)
sophisticated electric controllers - Holding - .225A @ 24 VAC
and the pressure-based signals in - Inrush - .400A @ 24 VAC
hydraulic irrigation systems. Specifications and Features
• Pressure: 40-150 psi (2,8-10,3 Bar)
• Wiring: 18 AWG x 4’ (1,2m) wire leads
- Maximum distance from converter to valve:
3/16”(4,7mm) – 500’ (152m)
Electric-Hydraulic Converters Model List 1/4” (6,4mm) – 1000’ (304m)
Model Description • Normally open: Valve elevation should not exceed 25’ (7,6m)
above or 70’ (21,3m) below controller elevation
• EHC-01-01 1-Station, Normally Open • Normally closed: Valve elevation should not exceed 0’ (0m)
• EHC-01-04 4-Station, Normally Open above or 70’ (21,3m) below controller elevation
• EHC-08-04 4-Station, Normally Closed • Direct manual control activates any sprinkler from the converter
• EHC-01-12 12-Station, Normally Open • Optional plastic pedestal (89-8342)
• EHC-08-12 12-Station, Normally Closed
• EHC-01-16 16-Station, Normally Open Warranty
• EHC-08-16 16-Station, Normally Closed • Two years
Specifying Information—ECH Converter

EHC-XX-XX
Model Configuration Stations
EHC XX XX
EHC—Electric-Hydraulic Converter 01—Normally Open 08—Normally Closed 01—1-Station 04—4-Station 12—12-Station 16—16-Station
Example: An Electric-hydraulic Converter with 16 stations and normally closed actuation would be specified as: EHC-08-16
101
TMR-1 (Maintenance Remote)
• 1.5 Mile (2,41km) Range Specifications
• Large LCD Dimensions
• Receiver size: 12” x 3” (305 x 76mm) with antenna
• Transmitter size: 12” x 3” (305 x 76mm) with antenna
• Receiver input voltage: 22-26 VAC input
• Transmitter DC Operating voltage: 4-6V DC
(AA Batteries included)
• Transmitter operates on 4 AA NiMH rechargeable batteries
or 4 AA standard alkaline batteries
• Battery charger: Dual rate 12-hour charger
• Receiver operates off of the 24 VAC power from the
controller
• FCC, UL-listed
Controller Compatibility
• Toro: TMC-212, TMC-424E, Custom Command,
TIS-PRO, TDC
This is irrigation maintenance at its easiest! Operating Specifications
The Toro® TMR-1 is a maintenance remote • Frequency: MURS designated channels – U.S. USE
ONLY (151.82, 151.88, 151.94, 154.57, 154.6 MHz)
system that allows a single operator to perform • Automatic detection and avoidance of busy channels
irrigation checks and fully operate the system • Operating temperature range: -10° to 60° C
from up to 1.5 miles (2,4 km) away. • Up to 1.5 miles (2,4 km) line-of-sight range and typically 1/2
mile (0,8 km) in obstructed areas
• Intuitive, easy-to-use keypad
• Large, easy-to-read LCD display
Features & Benefits • Remotely controls up to 500 stations
• Battery life indicator
Operates on Unlicensed MURS Frequencies • Circular connector comes standard with 5’ (1,5m) cable
Up to 1.5 mile (2,4km) line-of-sight range without the • Simple, intuitive command set
• Default run time is 10 minutes
hassles of FCC licensing.
• Display shows countdown of time left to run
• Ergonomic design and removable belt clip
Toro Exclusive All Stations Cycle (ASC) Function
Provides one-start system operation for walk-throughs, Optional Accessories
maximizing productivity – 2-minute runtimes per station. • TMR-1-CHG Wall Charger
Warranty
Quick-Connect System (For Toro Controllers) • Two years
Allows receiver to easily be moved from one controller to
another; circular connector can be bracket-mounted or
mounted using 1/2” conduit.
Multi-Controller/Multi-Site Capability
Programmable address allowing selection of up to 999
different remote receivers at controllers.
Specifying Information—TMR-1
TMR-1-XXX
Model Description
TMR-1 XXX
TMR-1—Toro Maintenance Remote KIT—Complete Kit: Transmitter, Receiver, Circular Connector/Cable Assembly, Batteries, Carrying Case
TX—Hand-held Transmitter, Batteries
RX—Receiver, Circular Connector Assembly
CC—Circular Connector
Example: A complete TMR-1 Maintenance Remote Kit would be specified as: TMR-1-KIT
102
EICON Remote
• 5-Mile (8,04km) Range Specifications
• Universal Wiring Dimensions
• MRC Receiver: 6.25” D x 8” W x 2.5” H
(159 x 203 x 64mm)
• Omnitrol Receiver: 1.75” D x 3.25” W x 5.25” H
(45 x 83 x 133mm)
• Hand-held radios feature rechargeable batteries
• Low battery indicators
• Hand-held transceivers are locally serviceable at radio
service centers
• All components comply with FCC rules and regulations
• Receivers available in 12, 24, 36 or 48 station configurations
• Omnitrol receivers may be upgraded to as many as
96 stations
• MRC units are compatible with any controller that controls
solenoids, relays etc., utilizing 24 VAC
For powerful, long-range, multi-site control, • Any of the outputs in the host controller maybe turned on
EICON maintenance remotes have been the or off in any order
irrigation industry for over 40 years. • A run time can be entered from the hand-held transceiver (from
1 to 20 minutes) for multiple valve syringe or
sequential operations
• Ability to individually address and control up to 1000
controllers with a single hand held transceiver
Features & Benefits • Receiver address codes may be changed by the operator
• An indicator light illuminates and begins blinking when the
receiver unit is properly installed
Up to 5-Mile (8km) Line-of-sight Range
• External antenna connectors are standard. For special
Plus powerful UHF FM signal is the best available tool for applications where reception may become a problem such
communicating with receivers behind walls or in other as deep underground or extreme ranges, special application
hard-to-reach locations. antennas are available
Optional Accessories
Universal Wiring
Receivers connect to any controller with 24 VAC outputs. • TRX-5U UHF Hand Held Transceiver with DTMF Keypad –
includes charger
• P-30 30” (76cm), 12-station wiring harness for wiring to
Two-way Voice Communication individual station outputs
Hand-held transmitter is capable of two-way voice • P-48 48” (122cm), 12-station wiring harness for wiring to
communication as well as date transmission. individual station outputs
• E-36: 36” (91cm) pigtail extension
Warranty
All Maintenance Remotes are ordered through and available • Two years
from the EICON Division of Toro:
EICON
7304 South Alton Way, #M,
Englewood Colorado, 80112
303-290-1881
Specifying Information—EICON Special Build

ESB -XXX-XX-XX
Description Model Type Options
ESB XXX XX XX
ESB—EICON SpecialBuild MRC—Maintenance Remote Complete Kit 12—12 stations Universal IR—Irritrol® MC-E Remote Connector
MRX—Maintenance Remote Receiver 24—24 stations Universal RB—Rain Bird® (ESP-MC) Remote Connector*
OTL —Omnitrol Maintenance Remote Complete Kit 36—36 stations Universal
OTX —Omnitrol Maintenance Remote Receiver 48—48 stations Universal
RLM—Permanent mount receiver card
*Only available in RLM Version
103
Central Control Overview
TriComm™ Sentinel® Central

Model
Systems Control
Page Number 106-107 108-109
Maximum Number
Unlimited 999 (total)
Of Satellites
Maximum Stations 24—TMC-424E
204
Per Satellite 200—TDC
Number Of 4—TMC-424E
16 per Satellite
Programs 10—TDC Sentinel
Ability To Make Communications
Program Changes X X Options
In Field Narrowband Radio
(450-470 MHz)
Programming
X X Ethernet/Internet
By Time
Programming Cell Enabled Data Modem
X
By Water Volume Landline Telephone
Automatic Spread Spectrum Radio
ET-Based Runtime X X (900 MHz)
Adjustment Fiber Optics
Programmable
X
Valve Sequence
Flow Optimization X
Alarms & Reports X X
Station Operation
X X
Recording
Water Use
X X
Recording
Historical Water
Daily, Weekly, Yearly
Use Comparison
Importing Maps X X
Software Only
Web-based X
Option
Software +
X
Computer Option
Windows®
X X
Compatible
Toro NSN®
X Two years
Support Inlcuded
104
Small Metal Stainless Steel Stainless Steel Two-Wire
Plastic Pedestal
Wall Mount Wall Mount Pedestal Satellite
Model (24 VAC
(24 VAC (24 VAC (24 VAC (Multiple
Terminals)
Terminals) Terminals) Terminals) Enclosures)
12, 24, 36, 48, 12, 24, 36, 48, 12, 24, 36, 48,
96 with MapTo 96 with MapTo 96 with MapTo 12, 24, 36, 48, 60,
Number Of Stations or wireless output or wireless output or wireless output 72, 84, 96
204
boards boards boards
Modular X X X X
MapTo Option X X X X X
ET-Adjust X X X X X
Flow Sensing
X X X X X
Compatible
Remote (SHHR)
X X X X X
Compatible
RainSensor
X X X X X
Compatible
Number Of
16 16 16 16 16
Programs
Simultaneous
Up to 2 Amps Up to 2 Amps Up to 2 Amps Up to 2 Amps 16
Program Operation
Number Of
8 per Program 8 per Program 8 per Program 8 per Program 8 per Program
Start Times
Max Station
4 Hours 15 Minutes 4 Hours 15 Minutes 4 Hours 15 Minutes 4 Hours 15 Minutes 4 Hours 15 Minutes
Runtime
Days Of The Week
X X X X X
Programming
Odd/Even
X X X X X
Programming
Interval
X X X X X
Programming
Flow Monitoring X X X X X
Water Use Logging X X X X X
Valves Per Station 2 2 2 2 2
Multiple Levels
Level 1, Level 3 Level 1, Level 3 Level 1, Level 3 Level 1, Level 3 ISP Decoders + Line
Of High Surge & Level 4 & Level 4 & Level 4 & Level 4 Surge Protectors
Protection
Warranty Five years Five years Five years Five years Five years
105
TriComm™ System
• Remote Site Management
• Internet-based Software
• Auto ET-Adjust
• Theoretical Water Use Reports
The Toro TriComm™ System is a Remote Site Features & Benefits
Management Tool for Irrigation Systems, using
an Internet-based control interface over a GPRS Internet-based Software
Access the TriComm System from any Web-connected
cellular network.
computer or WAP-enabled PDA or mobile phone.
Automatic ET-Adjustment
System connection to a weather station provides the
ability for automatic runtime adjustment by daily ET.
E-mail or Text message Alerts

Customizable e-mail or text message alerts for real-time
notification of controller alarms.
Two-Way Communications
All communications occur through state-of-the-art cellular
network with real-time indication of controller connectivity.
Controller Status shows currently operating programs and
stations with irrigation time remaining.
Water Use Reports

Comprehensive reporting provides theoretical water
consumption reports based on controller learned flow per
station versus daily runtime.
Toro NSN® Support

TriComm comes with a minimum of one-year of NSN
Support – unlimited toll-free support with 24/7/365
emergency paging.
TriComm Modem Kit
TMC-424E Compatible
Auto ET Adjust
TriComm Modem connection to a Davis Instruments

Vantage Pro2™ Weather Station provides user account with on-
line ET Data that can be used for daily adjustment of runtimes.
Coming Soon:
TDC Compatibility!
106
Specifications Customizable Alerts
Dimensions
• 3.54” W x 2.48” H x 0.79 D (90mm X 63mm X 29mm)
• Weight: .35 lbs. (150 g)
• Transformer input power: 100-240 VAC, 0.8A, 50/60 Hz
• Modem Input Power: 12 VDC, 1.08A
Controller Compatibility
The TriComm System can send real-time e-mail or text-message
TMC-424E Modular Controller Alerts to users for alarm conditions (flow, fuse, etc), or standard
operations (Station ON, etc).
• Hardware Includes:
– GPRS Modem Status Reports
– Plug-in Transformer
– Antenna
– Communication cable
• Operating temperature -22°F-149°F (-30°C to 65°C)
• Web-based software
• Internet Access through Web-enabled PC or WAP-enabled
Phones or Mobile Devices.
• Customizable Alerts through text message or e-mail.
• Individual User Permissioning
• Multiple User Levels Controller Status shows currently operating programs and stations
• Password-secured Login with time remaining, as well as any controller alarms.
• Controller grouping into “Areas” for shared Season Adjust
• Manual ET Entry & Runtime Adjustment
• Visual connectivity status of each account controller
• Download/Upload communications status bar TriComm Series Model List
• Access to all programming features of TMC-424E
• Manual Station or Manual Program Operation Model Description
• Status report of Currently Operating Programs/Stations TCOMM-ACTKIT-N First Modem to an Account. Includes:
• Communications Status and Cellular Signal Account Activation, Modem Kit, SIM
Strength Display Card, 1 year TriComm Web service,
• Alert & Communications Reports 1 year cellular data plan, 1 year NSN
• Multi-language capability (English, Spanish, French, phone support for account
German, Italian, Portuguese)
• 1 Year NSN Toll-free Phone support TCOMM-MODEM-N Additional Modems. Includes: Modem
• Automatic ET Adjustment of Runtimes Kit, SIM Card, 1 year TriComm Web
• Water Consumption Reporting service for controller, 1 year cellular
• Interactive Maps data plan
Warranty TCOMM-WEATHER-N Weather Station Modem Kit: Weather
Station Modem, Modem Connection
• Two years
Cable for Davis Instruments Weather
Console, SIM Card, 1 year TriComm
Web service for weather station, 1 year
cellular data plan.
TCOMM-XXXXXX-N
Description Model NSN
TCOMM XXXXXX N
TCOMM—Toro TriComm ACTKIT – Activation Kit (First Modem in Account) N – 1 Year NSN Support
MODEM – Modem Kit (Additional Account Modems)
WEATHER – Weather Station Modem and Connection Cable.
TCOMM-RENEW-X
Description Model Type
TCOMM RENEW X
TCOMM—Toro TriComm RENEW – One year Subscription & Communications Renewal A – Account Renewal (includes NSN Subscription & one modem).
M – Renewal for additional modem in account (controller or weatherstation)
107
Sentinel® Central Control
• Central Control Software
• PC-based
• ET-based Watering
Sentinel Central Control from Toro® is a powerful Features & Benefits
system that literally “stands guard” over large
irrigation sites. With the ability to control up to Simple To Use
999 field satellites from one location, users have a Microsoft® Windows-based software – daily operations
water management tool that provides reliability, and scheduling are made quick and easy.
accuracy and water savings.
Features For Water Management
ET-based watering, flow sensing and optimization,
water usage report with historical comparison.
Multiple Communication Options

Communication options like radio, telephone, fiber
optics cellular, and Ethernet can be mixed and
matched to meet system requirements.
Distributed Programming
Stores irrigation programs in the computer while
allowing irrigation control at the satellite level,
ensuring the loss of a component does not result in
the loss of irrigation across the system.
Toro NSN® Support

All centrals come with a minimum of two years of NSN
support – unlimited 24-hour toll-free support with
24/7/365 emergency paging
Three Choices Of Central Packages

1) Software only; 2) Software and radio communication
interface; 3) Central computer, software and radio
communication interface.
Turf
Guard® ET Adjust
Option
Water savings – ET-based

(multiple weather station options)
Effective ET-based system management can lead to water

savings of 25% to 30% per year. As an additional source
of savings, pipeline breaks, malfunctioning valves, and
missing heads are automatically detected and shut down,
preventing excessive water loss.
108
Specifications Distributed Intelligence
• Control up to 999 field satellites
• Group controllers into “systems” for system-wide
adjustments:
- Rain Days
- Percent Adjust
- ET-Adjustment from shared weather source
• Field changes to controller programs can be uploaded
to computer
• Support for the System Administration
- Set system, program and satellite descriptions
- Map valve positions on site maps
- Mark special dates on on-screen calendar
• Alarm reporting of any system component failure,
including communicatios, over/under-flow conditions,
electrical problems or power failure
• Extensive reporting features: Each Sentinel® controller is a fully intelligent unit with program
- Run time reports data stored at both the field satellite and within the central
- Water usage computer. In the event a computer or master controller goes
- Alarms off line, there will be no loss of irrigation. True two-way
- Logging of system changes communication allows programming changes to occur at the
• Water use, rain and ET accumulation on-site field controller and uploaded to the central computer.
• Flow optimizing to maintain optimum flow and shorten Protection from unauthorized changes is ensured as the
water window controller program can be easily compared to the program
• Ability to redefine valve sequence without physically saved in the central computer.
changing wire terminations in field satellite
• Information overview by group and satellite
• System status indications for individual field satellite
• On-line help screens
• Map-based feedback on system status
• Standard telephone modem or internet connection allows
for remote access to central software via pcAnywhere™
Sentinel Central Model List
Warranty Central Software/Computer Models
• Two year extendable by continuous NSN subscription
Model Description
• SGIS-1-T Software Only w/2 years of NSN Support
• SGIS-0-1 Software, Peripheral Hardware w/2 years of
NSN Support
• SGIS-1-0 Software, Computer Equip, Peripheral Hardware
w/2 years of NSN Support
NSN Support Extension Models
Model Description
• SSE-T-1 1-year Extension for SGIS-0-1 of SGIS-1-T
• SSE-T-3 3-year Extension for SGIS-0-1 of SGIS-1-T
• SSE-C-1 1-year Extension for SGIS-1-0 (w/computer
• SSE-C-3 warranty)
3-year Extension for SGIS-1-0 (w/computer
warranty)
Specifying Information—
Sentinel Central
SGIS-X-X
Description Optional
SGIS -X-X
SGIS—Sentinel Central Control Irrigation System 1-T—Software Only w/2 Years of NSN Telephone Support for Software
0-1—Software, Peripheral Hardware w/2 Years of NSN Telephone Support
1-0—Software, Computer Equipment, Peripheral Hardware w/2 Years of NSN Telephone Support
(with computer warranty)
109
Sentinel® Controllers
• Modular
• Remote Ready
• ET-based Run Times
• Flow Sensor Ready
• Two Wire Decoders
Toro® Sentinel field satellites are commercial Features & Benefits
grade, modular units that do the irrigation
control work in the field. Designed to operate Flow Sensing
in both stand-alone and central mode. Reads, displays and reacts to under and over flow
situations and track water usage. No additional circuit
boards are required.
Cabinet choices
High-Surge Options
Powder- 16-gauge Options for three levels of surge protection.
coated, stainless steel,
wall- front-entry,
mount wall-mount
Weather Based Irrigation
enclosure enclosure with Sentinel waters according to ET values by using one or
backplate a number of onsite weather stations.
and junction
box
Manual Station Outputs
Flip the toggle switch to manually operate stations.
MapTo Capability
Provides the ability to program and communicate to
Double-sided, 16-gauge another field controller within radio reception – providing
plastic, stainless steel, control of 96-stations from one Sentinel Satellite.
top-entry top-entry,
pedestal- pedestal-
mount mount True Two-Way Communication
enclosure enclosure with Allows for changes in the field to be uploaded to the
with dual backplate
backplates and junction
central computer and audible confirmation of hand
and junction box held radio to satellite commands.
box
Flow
Remote Sensor
Ready Compatible
Modular Remote and Flow Sensor Ready
Every Sentinel®
Controller
comes hand
held compatible
and flow sensor
ready right out
of the box.
Modular in 12-station increments, up to 48-stations.
110
Specifications
Dimensions Specifications and Features (cont.)
• Small wall-mount: • Flow sensor ready
10 ¼” W x 15 ¼” H X 5 ¼” D (260 x 387 x 133mm) • Handheld remote ready
• Stainless steel wall-mount: • Two sensor inputs included for rain sensors or other switch
17 1/8” W x 30 ¾” H x 8 5/8” D (435 x 781 x 219mm) sensors
• Stainless steel pedestal-mount: • Ability to connect to a laptop to download large station count
17 1/8” W x 34 ½” H x 8 5/8” D (435 x 876 x 219mm) programs
• Plastic Pedestal-mount: • Upgrade to a central computer system without additional field
17” W x 40” H x 16” D (432 x 1016 x 406mm) satellite hardware or costs
• Weight: • Program single or multiple stations to operate sequentially or
- Small Metal Wall-mount: 21 lbs (9,5 kg) start a program or multiple programs with just a few keystrokes
- Stainless steel wall-mount: 47 lbs (21,3 kg) • Ability to read open- or closed-contact switches in any station
- Stainless steel pedestal-mount: 64 lbs (29,0 kg) count configuration
- Plastic Pedestal: 60 lbs (27,2 kg) • Current monitor will disable a station if excessive amp draw is
detected
Electrical Specifications • Non-volatile memory will retain all programming and real-time
• Input power: data for 10 years
- 120 VAC, 60 Hz • Multi-language display: English, Spanish, French, and Italian
• Station output power: • Operating temperature: 14° to 140°F (-10° to 60°C)
- 24 VAC • Options from Level 1 to Level 4 surge protection offer
- 1.0 amps per station maximum multiple choices to meet regional lighting protection
- 2.0 amps total load needs: Level 4 surge rated to 20 KV @ 10 KVA
• Surge protection: Level 4, 24 V output boards,
20 KV @ 10 KVA Optional Accessories
• UL Listed • TRS – Wired RainSensor
• TWRS/TWRFS – Wireless RainSensor or Wireless Rain/Freeze
Specifications and Features Sensor
• TFS – Flow Sensors
• 16 programs • SHHR - Hand Held Remote
• Eight start times per program
• 6-week scheduling calendar Warranty
• Station runtimes from one minute to 4 hours and 15 minutes
• Global adjustment from 0-255% • Five years
Sentinel Satellite Model List

Model Description
• SSAK Sentinel Satellite Assembly with Keypad
• SSAMN Sentinel MapTo Assembly
Specifying Information—Sentinel
SSAXX-XX-XXX-6-N-S-X
Station Sensor Surge
Configuration Cabinet Type Output Comm.
Count Capable Options
SSAXX XX XXX 6 N S X
SSAK—Sentinel Satellite Assy. 12—12-station WS3—Powder-coated Wall Mount (Small) 6—Electric 4 V ac N—Narrow-band S—Sensor 1—Standard Surge Large-capacity
with Keypad 24—24-station PS1— Stainless Steel Pedestal Mount (Large) Terminal Block w/LEDs
SSAMN— Sentinel MapTo 36—36-station WS2—Stainless Steel Wall Mount (Large) 3—Surge on Small Wall Mount
48—48-station PP1— Plastic Pedestal Mount (Large) 4—Large-capacity Terminal Block w/LEDs
Switches Chokes & Add’l Surge
Example: A 24-station Sentinel Satellite in a metal wall-mount cabinet with electric output, narrow-band communication and surge,
would be specified as: SSAK24WS36NS3
Example: A 24-station Sentinel MapTo in a wall-mount cabinet with electric output, narrow-band communication and surge, would be specified as: SSAMN24WS36NS3
111
Sentinel® Two-Wire Controllers
• Up to 204 Stations Specifications
• Remote Ready
• Flow Sensor Ready Dimensions
• 1-, 2- or 4-station Decoders • Small wall-mount:
14” W x 13” H X 6” D (355 x 330 x 152mm)
Easy to install and expand – a highly cost-effective • Stainless steel wall-mount:
field controller for large central control installations. 17 1/8” W x 30 ¾” H x 8 5/8” D (435 x 781 x 219mm)
• Stainless steel pedestal-mount:
Using a two-wire path to communicate to decoders, 17 1/8” W x 34 ½” H x 8 5/8” D (435 x 876 x 219mm)
the Sentinel Two-Wire controller eliminates high • Plastic Pedestal-mount:
costs associated with traditional valve wiring. 17” W x 40” H x 16” D (432 x 106 x 406mm)
• Weight:
- Small Metal Wall-mount: 21 lbs (9,5 kg)
- Stainless steel wall-mount: 47 lbs (21,3 kg)
- Stainless steel pedestal-mount: 64 lbs (29,0 kg)
- Plastic Pedestal: 60 lbs (27,2 kg)
• Input power: 120 VAC or 220/240 VAC (50/60 Hz)
• Station output power: Up to 38 VAC maximum; 3 amps
Stainless Steel Plastic maximum output
Pedestal Pedestal • Wiring two-wire path: Jacketed, twisted pair 14 AWG to
15,000 ft (4572 m)
• Wiring two-wire path: Jacketed, twisted pair 16 AWG to
8,450 ft (2575 m)
• Wiring decoder to solenoid: Jacketed, twisted pair 14 AWG
to 400 ft (122 m)
Small Metal
Stainless Steel
Wall Mount Wall Mount • 100 Station base model expandable to 204 stations
• Operates Valves with DC-Latching Solenoids
Flow • 16 programs, eight start times per program
Remote • 6-week or 365-day scheduling calendar
Sensor
Ready • Station runtimes from one minute to 4 hours and 15 minutes
Compatible
• Global adjustment from 0-255%
• Handheld remote ready
Sentinel 2-Wire Controller Model List • Two sensor inputs included for rain sensors or other
Model Description switch sensors
• Multi-language display: English, Spanish, French and Italian
• ESBTW Eicon Special Build Two-Wire Controller • Operating Temperature: 14° to 140° F (-10°C to 60°C)
Two-Wire Station Decoders Optional Accessories
Model Description • TRS – Wired RainSensor
• ESB-DDC-1 1-station w/ integrated surge protection • TWRS/TWRFS – Wireless RainSensor or
(Operates up to two solenoids) Wireless Rain/Freeze Sensor
• ESB-DDC-2 2-station w/ integrated surge protection • TFS – Flow Sensors
(Operates up to four solenoids) • SHHR - Hand Held Remote
• ESB-DDC-4 4-station w/ integrated surge protection
(Operates up to eight solenoids)
Warranty
• ESB-TWD-ISP Sentinel two wire DC inline surge protection • Five years
ESB-TW-XXX-XXXXXX-XXX-VRA
Configuration Station Count Communications Enclosure Antenna
ESB TW XXX XXXXXX XXX VRA
ESB—EICON TW—Sentinel Satellite 100—204 station EN/OIM-Dual port Ethernet module with optical isolator WS5—Small Painted Cabinet VRA—UHF Omni-
Special Assembly, capability EEN-Single port Ethernet module WS4—Medium SS Cabinet directional
Build Two-Wire WEN—Wireless Ethernet WS2—SS Wall Mount antenna
PM—Phone modem PS1—SS Pedestal
CDM—Cellular Data Modem
SS—Spread spectrum
FO—Fiber optic
U2—UHF 2 Way Communication
112
Sentinel® Wireless Output Boards
Sentinel Wireless Output Boards utilize spread spectrum radio communication between the control module
and the output boards, allowing virtually unlimited installation flexibility while eliminating surge damage
to the control module. Solar powered output boards provide the perfect solution for medians and islands.
Retrofits and remote flow sensing are a snap since hardscape crossing issues are eliminated.
• 12-stations Specifications
Specifications & Features
• Wireless Output Controllers are expandable in 12-station
increments from 12 to 96-stations
• Ability to mount outputs remote from Sentinel® Control
Module - No cabling between output boards and
control module
• Improved sensing includes real-time current draw per station
• Manual Station Activation Switches
• High Surge Protection
Options
• Flow Monitoring Only units available (no stations) for water
supply flow monitoring
• Multiple Enclosure Options
• Standard or Solar-powered
• AC or DC-Latching
Warranty
• Two years
Sentinel® Custom Control Series

Sentinel Custom Control satellites are built to fit your needs and to eliminate controller overkill on small
sites. These satellites ship without manual interface keypad or display, minimizing expense without
sacrificing capabilities. All the features expected of a Sentinel controller, but cost-effective for your small
site needs.
• 9-, 12- or 18-station Specifications

Specifications & Features
• All the capabilities of a Sentinel Controller, including 16
programs and eight start times per program.
• 9, 12, and 18 station models• 6-week scheduling calendar.
• Station runtimes from one minute to four hours and
15 minutes.
• Global adjustment from 0-255%.
• Percent adjust by program from 0-255%.
• Two sensor inputs included for rain sensors or other switch
sensors.
• Flow Monitoring Only units available (no stations) for water
supply flow monitoring.
Options
• Multiple Enclosure Options
• Standard or Solar-powered
• AC or DC-Latching
Flow
Remote
Sensor
Warranty
Ready • Two years
Compatible
113
Hand Held Remote
The Sentinel remote allows users to conduct irrigation checks, and fully operate the system without
opening a field satellite enclosure or needing a second person. This remote also serves as a two-
way voice radio, allowing easy communication with other crew members.
Specifications
Dimensions
• Transmitter size (with antenna):
2 3/8” W x 1 3/4” D x 11” H (60 x 44 x 279mm)
• Simple command set
• Accesses controller and satellite features from the field
• Direct access to controllers (central control software not
required)
• Two-way voice communication capability
• System On and Off command activation
• Five-watt radio
• 120 selectable and programmable channels
• Range: 2 to 3 miles (3,2 to 4,8 km) Specifying Information
Warranty
SHHR Sentinel Hand Held Radio
• Two year
Retro Link
The Sentinel Retro-Link assembly unit allows an existing Irritrol® MC-E or Rain Bird® ESP-MC
controller to be upgraded to a Sentinel field satellite. Retro-Link is 100% compatible with the
Sentinel central control software.
Specifications
Dimensions
• 5 ½” W x 5 ½” L x 1 ½” H (140 x 140 x 279mm)
• Flow sensor, ET gauge or rain sensor capabilities
• Non-volatile memory in case of a power outage
• 100% compatibility with the Sentinel central control
software
• Optional hand-held control with a Sentinel hand-held unit
• Provides the convenience of remote manual control
Sentinel Retro Link Model List
• Multiple hand-helds can be used on one-site
Model Description
Accessories
• RLS-IR Sentinel Retro-Link Assembly (Irritrol® MC-E)
• SHHR - Sentinel Hand Held Remote • RLS-RB Sentinel Retro-Link Assembly
Warranty (Rain Bird ESP-MC)
• Two year
For information, ordering, or quotes, contact:
EICON Division • The Toro Company Model Description
7304 S. Alton Way, Suite M ESB - RLS - U - 2 - XX
Centennial, Colorado 80112 ESB—Eicon Special RLS—Sentinel U—UHF 2—2-way IR—Irritrol
PHONE: (303) 290-1881 FAX: (303) 290-9546 Build Retro-Link RB—Rain Bird
114
Sentinel® Weather Sources
Maximize efficiency on your Sentinel system by Features & Benefits

using ET-Based watering. ET-Based watering
automatically schedules irrigation based on Precision-ET
individual landscape needs and local weather Precision-ET is a web-based ET source that users subscribe
to through the Toro National Support Network . Virtual
conditions. The result is higher property values,
Weather Stations are assigned based on Latitude and
lower water bills and a healthier environment. Longitude coordinates. Each “location” will require a yearly
Unlike competitive systems, Sentinel works fee, however, unlimited controllers may be assigned to any
in conjunction with multiple weather sources latitude and longitude.
including on-site weather stations and the new
wireless, web-based Precision™ ET. On-Site Weather Stations*
Choose from a number of manufacturer’s weather stations
to meet your customer’s needs. Choose wired or wireless
versions to best suit the installation method needed.
*CIMIS (CA Only)

Freely access a network of over 120 automated weather stations in the
State of California managed by the California Department of Water
Resources (DWR).
Web-based
Precision™-ET 2-Way
Communication
On-site
Weather Station
Specifications
Recommendation On-Site Weather Station Supported Weather Sources:
• Davis Vantage Pro 2 Plus™ • Precision-ET (Virtual)
- Cabled (6162C) • CIMIS (Free CA only)
• Less Expensive • Davis Instruments®
• 100’ (30,5m) feet of cable provided - Vantage Pro 2 Plus™
• 1000’ (305m) possible - Grow Weather™
- Wireless (6162) • Campbell Scientfic®
• No cable necessary - ET 106
• Repeaters can be used - Turf Weather
- Wireless Repeaters (7654) • Irrisoft™
• AC powered - Weather Reach™
• Solar
• Used with 6162 Davis Station
• WeatherLink® Software (6510 SER)
115
Turf Guard® Soil Monitoring System
• Soil Moisture
• Salinity
• Temperature
• Web-based Interface
The Toro® Turf Guard Wireless Soil Monitoring Features & Benefits
system helps you improve your turf, soil and Monitor Moisture Levels And Adjust Irrigation
water efficiency. The system is a revolutionary Reduce water usage and improve playability without
technology that lets you know what’s going on risking turf quality. Promote root growth by avoiding
beneath the surface of your turf, so you can make over watering. Detect dry areas before it impacts the
timely, more-informed adjustments. turf’s health.
Track Salt Build-up And Schedule Flushing

Take the guesswork out of monitoring and managing
salinity levels. Get positive confirmation that your
flushing reduced soil salts. Know when and how much
water to flush with.
Monitor Daily Soil Temperatures

Predict peak soil temperatures early in the day to start
remediation activities before an emergency. Schedule
fungicide applications and pesticides for optimal
effectiveness. Understand evaporation rates and
syringing needs.
Wireless Network
No wires between the repeaters and the sensors, or
the sensor and the probes means that sensors can be
installed anywhere on your turf without disrupting
play. Install sensors in other areas without having to
trench or pull wires.
No need to guess at how much water to apply for flushing an

area, let Turf Guard tell you when enough water has been applied
to push the salts out of the root zone. Don’t wonder if you need
to irrigate an area tonight, let Turf Guard tell you if the area is in an
acceptable moisture level range.
116
Specifications How it works:
• Multiple sensors buried in a site at critical root zone levels.
Dimensions • Above-ground relays installed on or in existing irrigation
• Body: 2” x 3 5/8” x 6 1/8” (50 x 92 x 156mm) controller enclosures.
• Spikes: 1 3/4” x 3/16” (44 x 5mm) • Wireless MESH networking links all sensors to central computer
• Installation Hole Diameter: 4.25” (108mm) • Moisture, Temperature and Salinity readings displayed in
Electrical Specifications your office
• Input Power:
- Repeater: <.02A @ 6 VDC
- Base Station: <.1A @ 120 VAC, 50/60 Hz
Temperature Specifications Sensor
- Measures soil moisture, temperature,
• Operating: 32°F to 140°F (0°C - 60°C)
and salinity.
• Storage: -22°F to 180°F (-30°C - 82°C)
- Two distinct depths in the soil profile—
Sensing Critical root zone level and a second
• 0.1°F Temperature resolution 4.5 (11,5cm) inches lower
• 0.1 % Volumetric soil moisture content resolution - Independent measurements from each
• 0.1 dS/m Soil conductivity resolution (Salinity) depth.
Communication
• Repeater Range: Up to 5,000’ (1524m) line-of-sight
Repeater
• Buried Sensor Range: Up to 500’ (152m) line-of-sight - Can run off of a standard 120V outlet
• 900 MHz ISM Band FHSS Communication - Multiple sensors can be run through
• Additional licensing not required just one repeater, no configuration
Operating Specifications and Additional Features required.
• Immediately ready for operation after installation

• Advanced MESH routing technology overcomes obstacles
• Repeater can plug into standard 120V outlet
• Durable sensor housing is resistant to aeration damage Base Station
• Supports up to 500 sensors per system
• Expected sensor battery life of 3 years, field replaceable Connects to Internet in the office.
• Sensor reading sent every 5 minutes
• Measures two distinct depths in the soil profile
• Automatic network configuration and failure recovery
• Graphical system overview displays sensor data at a -glance
• Plots trends and compares historical and current readings
• Move quickly from system-wide averages to individual sensor
readings Web-based Interface
View current sensor readings and
Warranty
historical data remotely from any
• Comes with 1 year of NSN support (extended suport plans Web-connected computer or
available) Web-enabled Mobile Phone or PDA.
S p e c i f y i n g I n f o r m a t i o n — Tu r f G u a r d
Model Description
TG-S2-R Turf Guard Sensor With Replaceable Battery
TG-R-INT Repeater-Internal Mount
TG-R-EXT Repeater-External Mount
TG-B Base Station
TG-PS Power Supply
117
NSN® National Support Network
Isn’t it nice to know someone’s got you covered? Features & Benefits
Available day or night, you can count on the
Toro® National Support Network (NSN) team for 24-Hour, Seven-Day, 365 Support
total operational confidence. Worldwide, Toro NSN is always available to answer
your questions, troubleshoot your system and solve
your problems. And if needed, our 24-hour central
computer and component replacement service ensures
minimal disruption to the operation of your irrigation
system (U.S.).
Industry-Best Training – Classroom And
Internet- Based
Classroom instruction is available at regional locations
and at the NSN Training Center—where classes feature
hands-on computer training and the operation of Toro
hardware. NSN’s new internet-based Training In Ten™
features critical instruction that can be learned in ten
minutes or less and quickly applied right on-the-job!
The Confidence Of Working With The Best In

The Business
Toro NSN is a Microsoft® Certified Partner. Our
support technicians are licensed irrigators. NSN has a
diagnostic lab on-site for each irrigation platform, all
field hardware, plus ancillary products. The lab is used
Specifications to duplicate field issues and investigate causes and
Support for the Sentinel® Central Control solutions as part of Toro’s commitment to continuous
improvement. NSN is dedicated to irrigation—we
• Every Sentinel central package comes standard with 2-years
know your business and expectations.
NSN support
• Unlimited 24-hour toll-free support with 24/7/365 emergency New System Support, Flexible Options
paging
• Technical assistance by email with next business day response To Renew
• Remote PC assistance where connectivity is available Every new Sentinel offering includes Toro NSN support.
• Support of Microsoft® opertating system software when To protect your Toro investment long-term, choose
purchased from NSN a renewal option that gives you exactly what you
• NSN lab for field issue duplication and diagnostics need for continued reliable, cost-effective support and
• Technical bulletins extended warranty, including equipment upgrades to
• Remote data storage for duration of subscription period keep your technology current and powerful.
• Extended warranty on central hardware components with
continuous subscription Note: NSN Features vary based on the Sentinel product offering purchased.
• User training both hardware and software Contact Toro Sales for details.
• For more information on products, services or training,
contact:
Toro NSN
P.O. Box 3339,
Abilene, TX 79604
Phone: 888-676-8676
Website: toronsn.com
Specifying Information—NSN/Sentinel Support Extensions

SSE-X-X
Description Optional
SSE -X-X
SSE—Toro NSN Support for Sentinel Subscription Extensions* T-1— 1-year Extension for SGIS-0-1 or SGIS-1-T
T-3— 3-year Extension for SGIS-0-1 or SGIS-1-T
C-1— 1-year Extension for SGIS-1-0 (w/computer warranty)
C-3— 3-year Extension for SGIS-1-0 (w/computer warranty)
*1- and 3-year NSN extensions can be purchased up-front in conjunction with SGIS packages to provide the end-user with an additional one or three years of NSN support. For example, a
customer can order the SGIS-1-0 and the SSE-C-3 which would equal five years of NSN support. These extensions are for original purchases only; existing plan renewals are still purchased through
Toro NSN.
118
EICON Special Build
No matter what your central control system Features & Benefits
requires, from controller enclosures to com-
munications type, Toro’s Sentinel® can meet Communication Options
the demand. With EICON Special Build (ESB), Not only has Sentinel been at the forefront of narrowband
if a standard Sentinel controller is unable to radio technology as an irrigation control and data trans-
mission method, but we also have extensive experience
do the job, the ESB team can custom-produce in systems utilizing Ethernet, Internet, Spread Spectrum
exactly what your system needs. Radio, Cellular Phone, Landline Phone, Fiber Optics, Radio
Repeaters, or a combination of the above. So, if narrow-
band radios don’t work, tell us what will.
Enclosures To Meet Your Needs

Every installation is not the same and one enclosure does
not work in every situation. If you prefer sandstone-colored
plastic, because your landscape is in a semi-arid environ-
ment where green plastic just does not work, or if you
need painted metal enclosures, or enclosures with 9 or 96
stations, let us know.
Retro-Link Options
Many existing controllers, like the Irritrol® MC-E or a Rain
Bird® ESP-MC can be upgraded with a Sentinel Retro-Link
to turn them into a Sentinel Satellite without needing to
replace the controller.
Tell Us What You Need

Whether it is solar-powered controllers, a non-standard
voltage supply, or other issues you need solved, tell us what
you need. We’ll tell you if it’s possible.
Solar-powered Controller
Retrofit or areas like highway mediums where standard
120 VAC can’t be run to.
For information, ordering, or quotes, contact:

EICON Division
The Toro Company
7304 S. Alton Way, Suite M
Centennial, Colorado 80112
PHONE: (303) 290-1881 FAX: (303) 290-9546
Sandstone Plastic Pedestal

For desert / arid locations where a
turf-green just does not fit into the
landscape.
119
Landscape Drip Overview
Blue
DL2000® & Microline Drip In® Dripline*
Stripe® Emitters
w/ROOTGUARD® & Soakerline™*
Hose
Page Number 122-123 and 126 124-126 128-129 130-137
.710”(18mm) OD DL2000 .710”(18mm) OD Drip In 1/4” to 1”
Sizes
1/4” (6,4mm) Microline 1/4” (6,4mm) Soakerline (6,4-25mm)
12”; 18” (31cm; 46cm) Drip In
12”; 18” (31cm; 46cm) DL2000
Emitter Spacing 6”; 12” (15cm; 31cm)
6”; 12” (15cm; 31cm) Microline
Soakerline
0.5-1.0 GPH 0.5-1.0 GPH 0.5-4.0 GPH
Flow Range
(1,9-3,8 LPH) (1,9-3,8 LPH) (1,9-15,1 LPH)
15-60 PSI 15-60 PSI 8-60 PSI
Operating Pressure
(1,0-4,1 Bar) (1,0-4,1 Bar) (0,5-4,1 Bar)
NGE®,
Pressure
DL2000 Drip In PC Drip Bubblers
Compensating
Turbo-SC® Plus
Non-Pressure E-2® Classic
Microline Soakerline
Compensating Take-apart
Turf/Subsurface X
Shrubs/Ground
X X X X
Cover
Sloped Areas X X
High Traffic Areas X X
Nursery X
Median Strips/
X X
Parking Islands
High Wind
X X X X
Conditions
* Custom emitter spacing available. Requires minimum order of 80K feet.
120
24
Note: Products not shown to scale
1. Drip Zone Kit (p. 140) 7. NGE Emitter (p. 132) 13. Vacuum Relief Valve (p. 129) 19. Goof Plugs & Bug Caps (p. 129)
2. Blue Stripe Hose (p. 130) 8. Turbo-SC Emitter (p. 134) 14. Operation Indicator (p. 129) 20. Hole Punchers (p. 129)
3. DL2000 Subsurface Dripline (p. 124) 9. E2 Emitter (p. 146) 15. End Clamp (p. 129) 21. FPT to Loc-Eze Adapter (p. 129)
4. DL2000 Micro-Line (p. 128) 10. Varistake Emitter (p. 140) 16. Steel Staple (p. 129) 22. Loc-Eze Elbow (p. 129)
5. PC Brown Drip-In Dripline (p.126) 11. Multi-Outlet Manifold (p. 137) 17. Plastic Locator Stake (p. 129) 23. 1/4” (6,4mm)Barbed Coupling (p. 129)
6. 1/4” Soakerline Dripline (p. 128) 12. Flush Valve (p. 129) 18. 1/4” Locater Stake (p. 129) 24. Loc-Eze Tee (p. 129)
121
DL2000® Series PC Dripline
• 12” (31cm) and 18” (46cm) Emitter Spacing
• 0.5 (1,9 LPH) or 1.0 GPH (3.8 LPH)
• 5/8”(16mm)—0.710” x 0.620”
(18,03 x 15,75mm)
• US Gov. Approved ROOTGUARD® Protection
Toro® DL2000 Dripline is the most technologically Features & Benefits

advanced subsurface irrigation system available.
Through its non-toxic ROOTGUARD® technology, U.S. Government-approved ROOTGUARD
only DL2000 delivers optimal water application Protection
directly to the root zone while safely inhibiting The pre-emergent, TREFLAN®, is impregnated into
the emitter during the molding process and creates a
root intrusion. “force field” effect around the emitter outlet, diverting
root growth and assuring long term reliability.
At Grade Or Buried Options

Can be installed at grade or buried 4” – 8” (10,2-
20,4cm)underground, delivering irrigation directly to
the plant’s root zone.
Pressure Compensating PC Self-cleaning Emitters

Provide precise, trouble-free water application.
TREFLAN® impregnated emitters are inseparably
welded to the inside wall of durable polyethylene
Effluent dripline tubing during manufacturing.
Options
Available Environmentally Friendly
Irrigation takes place at or below grade so there is
minimal water loss due to mist, evaporation, run-off or
Air/Vacuum wind. Fertigation needs are reduced because water is
Flush Valve
Relief Valve
(Part No. T-FCH–H) applied only at the root zone.
(Part No. T-YD–500–34)
Safety and Liability

When DL2000 is installed below ground, the landscape
Dripline surface is free from irrigation equipment that may dis-
rupt activities or cause injury. Sub-surface performance
also avoids slippery walkways and roadways as well as
wet walls, fences and windows.
Emitter
Distinctive red stripe on tubing signifies

DL2000 with ROOTGUARD
Elbow
Control Tee (Part No. T-FEE16)
Water Source Valve (Part No. T-FTT16)
Also Available as a
Filter Drip Zone Valve Kit.
(Part Nos.
T-ALFD75150–L) Pressure Regulator
(Part Nos. T-PMR15–LF,
T-PMR25–LF, T-PMR40–MF,
T-PMR25–HF & T-PMR25–MF)
Other fittings available:
• Coupling (Part No. T-FCC16)
• Adapter (Part No. T-FAM16)
• Compression Adapter (Part No. T-CA-710)
122
Inlet Pressure VS Maximum Length of
5/8” (16mm) OD
Head Loss vs. Dripline Length and Emitter Spacing Run In Feet
DL2000 5⁄8” (16mm), 1.06 GPH (4 LPH) Emitter @ 0% Slope Part No.
Flow Rate Emitter
15 psi 25 psi 30 psi 40 psi
(GPH) Spacing
40
12" 18"
RGP-212 .53 12” 250’ 360’ 400’ 460’
RGP-218 .53 18” 350’ 515’ 565’ 650’
12" (304 mm)
35 Spacing RGP-412 1.0 12” 160’ 240’ 260’ 300’
RGP-418 1.0 18” 240’ 340’ 375’ 430’
30 18" (457 mm)
Spacing
DL2000 Performance Table—US
25
Head Loss (psi)
Flow Rate .53/1.06 gph

20 Coefficient of Variation (Cv) ≤ 5%
Flow Exponent (x) 0.05
15
Inside Diameter 0.620”
Outside Diameter 0.710”
10
Wall 0.045”
5 Operating pressure (P) 15–60 psi
Minimum filtration requirement 120 Mesh
0 Hazen-Williams C factor 140
0 50 100 150 200 250 300 350 400 450 500 550
Dripline Length (feet) Barb loss factor (Kd) .98
DL2000 Model List

5/8” (16mm) DL 2000 PC DRIPLINE with ROOTGUARD
Model Description
Head Loss vs. Dripline Length and Emitter Spacing • RGP-212-01 0.5 GPH (1,9 LPH), 12” (31cm) emitter spacing,
DL2000 5⁄8”, 0.53 GPH (2 LPH) Emitter @ 0% Slope 100 ft. (31m) coil
• RGP-412-01 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
40
12" 18"
100 ft. (31m) coil
12" (304 mm)
35 Spacing
100 ft. (31m) coil
30 18" (457 mm)
Spacing 100 ft. (31m) coil
25
Head Loss (psi)
500 ft. coil (152m)

20 • RGP-412-05 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
500 ft. coil (152m)
15
500 ft. coil (152m)
10
5 500 ft. coil (152m)
0 1000 ft. coil (304m)
0 100 200 300 400 500 600 700 800 900
Dripline Length (feet) • RGP-412-10 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
1000 ft. coil (304m)
1000 ft. coil (304m)
1000 ft. coil (304m)
NOTE: For information about the effects of temperature on
polyethylene drip hose/tubing, please see bottom of pg. 164.
5/8” DL2000 PC PURPLE DRIPLINE with ROOTGUARD
Model Description
• RGP-212-05-E 0.5 GPH (1,9 LPH), 12” (31cm) emitter spacing,
500 ft. coil (152m)
• RGP-412-05-E 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
500 ft. coil (152m)
Warranty • RGP-218-05-E 0.5 GPH (1,9 LPH), 18” (46cm) emitter spacing,
500 ft. coil (152m)
Against Root Intrusion: Seven years • RGP-418-05-E 1.0 GPH (3,8 LPH), 18” (46cm) emitter spacing,
Hose: Five years pro-rated 500 ft. coil (152m)
Specifying Information—DL2000
RGP X-XX-XX-E
Emitter Flow Emitter
Coil Length Optional
Spacing
X XX XX E
2—.50 GPH (1,9 LPH) 12—12” (30,5 cm) 01—100’ (30,5 m) 05—500’ (152,4 m) E—Purple Tubing for Non-potable Water
4—1.0 GPH (3,8 LPH) 18—18” (45,7 cm) 10—1000’ (305 m)
Example: A 500’ (152,4m) coil of Pressure-compensating Dripline with rootguard, 12” (30,5cm) emitter spacing and 0.5 GPH (2.0 LPH), would be specified as: RGP-212-05
Note: Specify/use Loc-Eze Fittings or .710 Compression Fittings
For precipitation rate information, please refer to pg. 164

123
Drip In® PC Brown Dripline
• 12” (31cm) and 18” (46cm) Emitter Spacing
• 0.5 (1,9 LPH) or 1.0 GPH (3.8 LPH)
• Pressure Compensating
• 100’ (30,5m), 250’ (76,2m) & 500’ (152m)Coils
With higher water costs in our future, it makes Features & Benefits
more sense than ever to use inline tubing in
suitable landscape applications. Drip In PC is Built-in Emitters
Deliver precise water application directly to the root
both an effective and economical choice for
zone.
at-grade installations.
Fully Pressure-compensating from
15 – 60 PSI (1,03-4,13 Bar)
The pressure compensating design makes it ideal for
slopes, high wind areas and areas with limited water
supply or low pressure.
High Uniformity
Proven, dependable pressure compensating Drip In
emitters deliver uniform, precise emitter discharge rates
with exceptionally low variability.
Keeps Water Off Hardscapes
Preventing unsightly water stains.
Effluent
Options
Available
Flushing
Inlet
Regulating
UNIQUE, CONTINUOUS FLUSHING HIGHLY CLOG RESISTANT DUAL OPPOSED OUTLETS

Flushing occurs at low pressure at start Unique, raised internal filtration design In above ground installations, dual
up, during the irrigation cycle if the deflects debris upward and away from opposing ports in every emitter assure
emitter begins to clog and there is a the emitter’s inlet. Because the inlet is that at least one outlet provides air relief,
reduction in flow, and as pressure drops also raised, sediment won’t collect at which prevents back-siphonage
during shut-down. the inlet while the system is off. of contamination into the emitter.
124
Head Loss v. Dripline Length and Emitter Spacing Head Loss v. Dripline Length and Emitter Spacing
Drip In PC 5/8", 0.53 gph (2 lph) Emitter @ 0% Slope. Drip In PC 5/8", 1.06 gph (4 lph) Emitter @ 0% Slope.
12" 18"
40 12" 18"
40
35 12" (304 mm) 35

Spacing 12" (304 mm)
Spacing
30 18" (457 mm) 30
Spacing 18" (457 mm)
Spacing
25
Head Loss (psi)
25
Head Loss (psi)

20
20
15
15
10
10
5
5
0
0
0 100 200 300 400 500 600 700 800 900
0 50 100 150 200 250 300 350 400 450 500 550
Dripline Length (feet) Dripline Length (feet)
Length of Run Chart

5/8” (0.620” ID / 0.710” OD) Inlet pressure vs. Max length of run in Feet
Part Number Tubing Size Flow Rate Emitter Spacing 15 psi 25 psi 30 psi 40 psi
T-PCB1853-12 .620” ID .53 gph 12” 250’ 360’ 400’ 460’

T-PCB1853-18 .620” ID .53 gph 18” 350’ 515’ 565’ 650’
T-PCB1810-12 .620” ID 1.0 gph 12” 160’ 240’ 260’ 300’
T-PCB1810-18 .620” ID 1.0 gph 18” 240’ 340’ 375’ 430’
DripIn PC Model List

5/8” (16mm) Brown PC Dripline
0.620” ID x 0.710” OD x 0.045” Wall
(15,7mm ID x 18,0mm OD x 1,1mm Wall)
Model Description
• T-PCB1853-12-100 0.53 GPH (2,0 LPH), 12” (31cm) emitter spacing,
100’ (31m) coil
100’ (31m) coil
Dripin PC Brown Performance Table—US • T-PCB1853-18-100 0.53 GPH (2,0 LPH), 18” (46cm) emitter spacing,
100’ (31m) coil
Flow Rate .53/1.06 gph • T-PCB1810-18-100 1.0 GPH (3,8 LPH), 18” (46cm) emitter spacing,
Coefficient of Variation (Cv) ≤ 5% 100’ (31m) coil
250’ (76m) coil
Outside Diameter 0.710” • T-PCB1810-12-250 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
Wall 0.045” 250’ (76m) coil
Operating Pressure (P) 15–60 psi • T-PCB1853-18-250 0.53 GPH (2,0 LPH), 18” (46cm) emitter spacing,
Minimum Filtration Requirement 120 Mesh 250’ (76m) coil
Hazen-Williams C Factor 140
250’ (76m) coil
Barb Loss Factor (Kd) .98
500’ (152m) coil
500’ (152m) coil
• T-PCB1853-18-500 0.53 GPH (2,0 LPH), 18” emitter spacing, 500’ (152m) coil
NOTE: For information about the effects of temperature on • T-PCB1810-18-500 1.0 GPH (3,8 LPH), 18” emitter spacing, 500’ (152m) coil
5/8” (18mm) Purple PC Dripline (Effluent)
• T-PCE1810-12-500 1.0 GPH (3,8 LPH), 12” (31cm) emitter spacing,
500’ (152m) coil
Specifying Information—DripIn PC
T-PCX-X-18-XX-XX-XXX
Tubing Tubing Emitter Flow Emitter Spacing
Skin Coil Length
Type Size (@ 30 psi)
T-PC X 18 XX XX XXX
T-PC–Drip In Tubing B–Brown Drip In Tubing 18–5/8” (.720 OD X 0.620” ID) 53–0.53 gph (2,0 LPH) 12–12” (30,5cm) 100–100’ (30,5m)
E–Purple Drip In Tubing (Effluent) (18mm OD X 16mm ID) 10–1.00 gph (4,0 LPH) 18–18” (45,7cm) 250–250’ (75,2m)
500–500’ (152,4m)
Example: A coil of 5/8” (16mm ID) pressure compensating .53 gph (2,0 LPH)emitters spaced at 12” ((45,7cm) on a 500’ (152,3m) coil would be specified as: T-PCB1853-12-500

125
DL2000® Series Microline with ROOTGUARD®
• 1/4” (6,4mm)Tubing Features & Benefits
• 0.5 GPH (1,9 LPH)
• 6” (16cm) and 12” (31cm) Emitter Spacing ROOTGUARD® Protection
Uses the non-toxic Treflan® creating a force-field
effect guarding against root intrusion into the emitters.
¼” (6,4mm) Tubing With Built-in Emitters

Allows for ease of installation even to the smallest of
areas.
Length of Run Chart

Part Flow Emitter Inlet Maximum
Tubing Size
Number Rate Spacing Pressure Length of Run
1/4” .53 gph 6” 15 psi 19’
T-MCRG-206
(6,4mm) (2,0 LPH) (15,2mm) (1,03 bar) (5,8m)
1/4” .53 gph 12” 15 psi 33’
T-MCRG-212
DL2000 Microline Performance Table—US (6,4mm) (2,0 LPH) (30,5mm) (1,03 bar) (10m)

Wall 0.040” Specifying Information—Microline
Operating Pressure 15–60 psi Part Number Description
Minimum Filtration Requirement 140 Mesh T-MCRG-206 DL2000 100’ (30,5m) Roll, 1⁄4” (6,4mm) Non-pressure-compen-
sating Microline Dripline w/rootguard, 6” (15,2mm) Emitter
Nominal Flow Rate (Q) 0.53 gph
Spacing, 0.50 gph (1,9 LPH)
NOTE: For information about the effects of temperature on T-MCRG-212 DL2000 100’ (30,5m) Roll, 1⁄4” (6,4mm) Non-pressure-compen-
polyethylene drip hose/tubing, please see bottom of pg. 164. sating Microline Dripline w/rootguard, 12” (30,5mm) Emitter
Spacing, 0.50 gph (1,9 LPH)
Soakerline™ 1/4” (6,4mm) Classic Dripline

• 100’ (30,5m) Coils Features & Benefits
• 0.53 GPH (2.0 LPH)
• 6” (15cm) and 12” (31cm) Emitter Spacing Flexible And Sturdy Design
Soakerline ¼” (6,4mm)dripline has a flexible and sturdy
design making it ideal for young trees, shrubs, planter
boxes and small landscape applications.
Built-in Emitters
Allow for ease of installation.
Brown Color
To blend into landscape areas.
Soakerline Performance Table-US

Wall 0.040”
Operating Pressure 15–60 psi
NOTE: For information about the effects of temperature on Minimum Filtration Requirement 140 Mesh
polyethylene drip hose/tubing, please see bottom of pg. 164. Nominal Flow Rate (Q) 0.53 gph
Length of Run Chart

Emitter Inlet
Part Number Tubing Size Flow Rate Max Length of Run
Spacing Pressure
T-SDB252-6-100 1/4” (6,4mm) .53 GPH (2,0 LPH) 6” (15,2mm) 15 psi (1,03 bar) 19’ (5,8m)
T-SDB252-12-100 1/4” (6,4mm) .53 GPH (2,0 LPH) 12” (30,5mm) 15 psi (1,03 bar) 33’ (10m)

126
Loc-Eze® Fittings and Accessories
5
⁄8” ( 1 6 m m ) L o c - E z e ® F i t t i n g s
Part Number Description
T-FTT16 T-FEE16 T-FCC16 T-FAM16
T-FTT16 Loc-Eze Tee
T-FEE16 Loc-Eze Elbow
T-FCC16 Loc-Eze Coupling
T-FAM16 Loc-Eze x 1/2” (13mm) MPT Male Adapter
T-FTV16 Loc-Eze x 1/2” (13mm) Slip Adapter Tee
T-FTF16 Loc-Eze x 1/2” (13mm) FPT Tee
T-FJA16 Loc-Eze x 3/4” (20mm) MHT without Cap
T-FJJ16 Loc-Eze x 3/4” (20mm) MHT with Cap T-FTF16 T-FJA16 T-FJJ16
T-FAS16-1 Loc Eze x 3/4” (20mm) FHT Swivel with Washer
T-FTV16
T-FTS16 Loc Eze x 3/4” (20mm) FHT Swivel with Screen
T-FTS16-1 Loc-Eze x 3/4” (20mm) FHT Swivel Tee with Washer
T-FAS16 Loc-Eze x 3/4” (20mm) FHT Swivel Tee with Screen
Note: 5⁄8” (16mm) EHW1645 is an equivalent hose size to DL2000 Dripline.
T-FAS16-1 T-FTS16 T-FTS16-1 T-FAS16
Accessories
T-YD-500-34 T-FCH-H-FIPT T-FPG02 T-YD-500-34 Air Vent—1⁄2” (13mm) MIPT Air Release & Vacuum Relief Valve
T-FCH-H-FIPT Flush Valve—3⁄4” (20mm) FPT (Pipe Thread), 0.8 GPM,
2 psi Sealing Pressure
T-FCH-H-FHT Flush Valve—3⁄4” (20mm) FHT (Hose Thread), 0.8 GPM,
2 psi Sealing Pressure
T-DL-MP9 DL2000 Pop-up Operation Indicator
T-FJQ16 5/8” (16mm) Figure-eight End Clamp
T-FCH-H-FHT T-FJQ16 T-BC-025 T-SS6-50 3/4” (20mm) Steel Soil Staple to Hold Tubing in Place
T-IPS1500 5/8” (16mm) Plastic Locator Stake to Hold Tubing in Place
T-DL-MP9 T-FPG02 Double-sided Goof Plug
T-BC‑025 Bug Cap for 1/4” (6,4mm) Tubing
T-FMP16 Stainless Steel Insertion Tool for 1/4” (6,4mm) Barbed Fittings and
Emitters
T-IPS1500 T-SS6-50 T-FMP16
M i c r o l i n e 1⁄ 4 ” ( 6 , 4 m m ) F i t t i n g s
T-FCC0400 T-FTT0400 T-FEE0400
T-FTT0400 Tee (Barb x Barb)
T-FEE0400 Elbow (Barb x Barb)
T-FCC0400 Coupling (Barb x Barb)
T-FCV-BB Microflow Valve (Barb x Barb)
T-FMP08 Hose Punch for 1/4” (6,4mm) barbed fittings and emitter
T-IPS0104 1/4” (6,4mm) plastic locator stake to hold tubing in place
T-FCV-BB T-FMP08 T-IPS0104
0.710 (18mm)OD Compression Fittings
Part No. Description
OD Compression Adapter 1/2” (13mm) Spigot
T-CA-710
OD Compression Adapter with Flush Valve, 0.8 GPM (3,03 LPM),
T-CEFCH-H
2 psi (9,76k/m²) Sealing
T-CA-710 T-CEFCH-H
127
Blue Stripe® Polyethylene Hose
• 5/8” (16mm), 3/4” (20mm), 1” (25mm) ID
• 7 Year Warranty
Central to any point-source drip installation, is Features & Benefits

the water delivery system. It needs to be reliable,
trouble-free and cost effective. Providing the Manufactured From Premium Grade Linear
solution for over 30 years, Toro® Blue Stripe® Low Density Polyethylene
For the most dependable long-lasting operation.
hose leads the industry as the highest requested
hose on the market. Minimum 2% Carbon Black Added
To provide optimum protection against ultraviolet (UV)
deterioration.
Available With Blue, White Or Lavender Stripe

For easy on-site identification of drip zones or
applications during installation and operation.
Wide Range Of Choices

Available in a wide range of diameters, wall thicknesses,
Effluent coil lengths and working pressures.
Options
Available Lock-eze Fittings Recommended
5/8” (16mm) Loc-Eze Fittings are designed to work
NOTE: For information about the effects of temperature on with 5/8” (16mm) hose.
Blue Stripe® Micro-Distribution Hose

ID Controlled Hose
Coil Ship Pressure
Hose Size Nominal Hose Size Coil Length
Weight Rating
Part Number
ID ID OD Wall
Ft. Lbs. psi
Inch Inch Inch Inch
Blue Stripe Round Hose - Coil Stretch Wrapped
1/4” 0.170 0.250 0.040 1,000 9.64 161
T-EHW0437-100
(6,4mm) (4,31mm) (6,4mm) (1,02mm) (305m) (4,37k) (,078bar)
Blue Stripe Round Hose - Coil Banded
1/4” 0.170 0.250 0.040 100 1.1 161
T-EHD0437-010
(6,4mm) (4,31mm) (6,4mm) (1,02mm) (30,5m) (,5k) (,078bar)

ID Controlled Hose
Coil Ship Pressure
Hose Size Nominal Hose Size Coil Length
Weight Rating
Part Number
ID ID OD Wall Min.
Ft. psi
Inch Inch Inch Inch Lbs.
Blue Stripe Round Hose – Coil Stretch Wrapped
®

5/8” 0.615 0.705 0.045 100 4.0 61
T-EHW1645-010
(16mm) (15,49mm) (17,91mm) (1,143mm) (30,5m) (1,81k) (,029bar)
5/8” 0.615 0.705 0.045 500 19.8 61

T-EHW1645-050
(16mm) (15,49mm) (17,91mm) (1,143mm) (152,4m) (8,98k) (,029bar)
Blue Stripe® Round Hose - Coil Banded
0.570 0.680 0.055 500 21.5 77

T-EHD1554-050A (palletized) -
(14,48mm) (17,27mm) (1,397mm) (152,4m) (9,75k) (,037bar)
5/8” 0.615 0.705 0.045 500 18.9 61

P,X T-EHD1645-050A (palletized)
(16mm) (15,49mm) (17,91mm) (1,143mm) (152,4m) (8,57k) (,029bar)
3/4” 0.805 0.920 0.057 500 31.2 59

P,X T-EHD2057-050A (palletized)
(20mm) (20,45mm) (23,34mm) (1,448mm) (152,4m) (14,15k) (,028bar)
1” 1.060 1.195 0.067 660 63.3 53

T-EHD2667-066A (palletized)
(25mm) (26,92mm) (30,35mm) (1,702mm) (201m) (28,7k) (,025bar)
Note: For the two designated part numbers above, replace “D” with “P” in the part number to specify Purple Hose for reclaimed water. For the same two designated part numbers above, replace
“D” with “X” in the part number to specify White Stripe Hose.
128
Blue Stripe® Polyethylene Hose Model List
Micro-Distribution Hose - Coil Stretch Wrapped
Model Description
LLDPE; 1/4”; ID: 0.170’’; OD: 0.250’’; Wall: 0.040’’; 1,000’ coil
• T-EHW0437-100
(LLDPE; 6mm; ID: 0,4mm; OD: 0,6mm; Wall: 0,1mm; 304m coil)
Micro-Distribution Hose - Coil Banded
Model Description
LLDPE, 1/4”, ID-0.170’’, OD-0.250’’, Wall-0.040’’, 100’ coil
• T-EHD0437-010
(LLDPE; 6mm; ID: 0,4mm; OD: 0,6mm; Wall: 0,1mm; 31m coil)
Inside Diameter (ID) controlled - Coil Stretch Wrapped
Model Description
• T-EHW1645-010 5/8”; ID: 0.615”; OD: 0.705”; Wall: 0.045”; 100’ coil
(16mm, ID: 1,6mm; OD: 1,8mm; Wall: 0,1mm; 31m coil)
• T-EHW1645-050 5/8”; ID: 0.615”; OD: 0.705”; Wall: 0.045”; 500’ coil
(16mm, ID: 1,6mm; OD: 1,8mm; Wall: 0,1mm; 152m coil)
Inside Diameter (ID) Controlled - Coil Banded
Model Description
ID: 0.570’’; OD: 0.680’’; Wall: 0.055’’; 500’ coil (palletized)
• T-EHD1554-050A
(ID: 14,5mm; OD: 17,3mm; Wall: 1,4mm; 152m coil palletized)
5/8 ”; ID: 0.615’’; OD: 0.705’’; Wall: 0.045’’; 500’ coil (palletized)
• T-EHD1645-050A
(16mm; ID: 15,6mm; OD: 17,9mm; Wall: 0,1mm; 152m coil palletized)
3/4”; ID: 0.805’’, OD: 0.920’’; Wall: 0.057’’; 500’ coil (palletized)
• T-EHD2057-050A
(20mm; ID: 20,4mm, OD: 23,4mm; Wall: 1,5mm; 152m coil palletized)
1”; ID: 1.060’’; OD: 1.195’’; Wall: 0.067’’; 660’ coil
• T-EHD2667-066A
(25mm; ID: 26,9mm; OD: 30,4mm; Wall: 1,7mm; 201m coil)
Lavender Stripe Round Hose
Model Description
5/8”, ID-0.615’’, OD-0.705’’, Wall-0.045’’, 500’ coil (palletized)
• T-EHP1645-050A
3/4”, ID-0.805’’, OD-0.920’’, Wall-0.057’’, 500’ coil (palletized)
• T-EHP2057-050A
White Stripe™ Round Hose
Model Description
• T-EHX1645-050A 5/8”, ID-0.615’’, OD-0.705’’, Wall-0.045’’, 500’ coil (palletized)

• T-EHX2057-050A 3/4”, ID-0.805’’, OD-0.920’’, Wall-0.057’’, 500’ coil (palletized)
Specifying Information—Blue Stripe Polyethylene Hose

T-EH-X-XX-XX-XXX-A
Model Stripe Color / Packaging Tubing Size (ID) Wall Thickness Coil Length Optional
T-EH X XX XX XXX A
T-EH - Blue D - Blue Stripe / Coil Banded 04 - 4mm (.16”) 37 - .037” (0,94mm) 010 - 100’ (30,5m) A- Palletized
Stripe Hose W - Blue Stripe / Stretch Wrapped 15 - 15mm (.59”) 45 - .045” (1,14mm) 050 - 500’ (153m)
P - Lavender Stripe / Coil Banded 16 - 16mm (.63”) 54 - .054” (1,37mm) 066 - 660’ (201m)
X - White Stripe / Coil Banded 20 - 20mm (.79”) 57 - .057” (1,44mm) 100 - 1000’ (305m)
26 - 26mm (1.02”) 67 - .067” (1,70mm)
129
NGE® New Generation Emitters
• 0.5 (1,9 LPH), 1.0 (3,8 LPH)
and 2.0 GPH (7,6 LPH)
• 8-60 psi (0,6-4,14 Bar)
• Pressure-Compensating
Designed for demanding drip irrigation installations, Features & Benefits
the Toro® New Generation Emitter (NGE) has
what it takes to keep your system flowing. Uniform Flow Rates
Make the NGE ideal for use in difficult topographical
conditions.
Unique Emitter Design And Pressure

Compensating Diaphragm
Allows the emitter to self-flush during operation and
shut-down to facilitate cleaning. This ensures the
emitter is free of debris at start-up and during the
emitter operation.
NGE with Stops the emitter from draining below 2-3 psi (0,14-
Red, 2.0 GPH 0,20 Bar) preventing complete drainage of the system.
NGE with (7,6 LPH)
NGE with This reduces the time required to refill the system at
Black, 1.0 GPH color‑coded
(3,8 LPH) dust cap
Blue, 0.5 GPH start-up improving the overall operation.
(1,9 LPH)
color-coded
color‑coded Allows the emitter to close inhibiting back siphoning
dust cap
dust cap and preventing the emitter from being contaminated
with debris
Coefficient Of Variation (CV) Of 3% Or Less

Male adapter As tested by Toro and independent labs, the NGE is
option for use with one of the best performing pressure-compensating
¼” (6,4mm) emitters available.
exit tubing
130
Shutdown Flush
P r es s u r e C o m p en s a t i n g R a n g e
3.00
I
2.50 R
R
I
2.00 G
Flow Rate (gph)

A
T-DPC08 T
T-DPC04 I
1.50
T-DPC02 O
N
1.00
T
I
M
0.50 E
0.00
4 6 10 20 30 40 50 60 60 50 40 30 20 10 6 4 2
Pressure (psi)
Increasing Pressure Decreasing Pressure
NGE Flow Rates—US

Pressure DPC02 DPC04 DPC08
psi gph gph gph
6 0.46 0.91 1.73
8 0.51 1.01 1.95
10 0.53 1.08 2.11
15 0.53 1.10 2.21
20 0.53 1.08 2.17
25 0.54 1.05 2.13
30* 0.54 1.04 2.12
35 0.55 1.04 2.12
Specifications 40 0.55 1.04 2.12
45 0.55 1.04 2.14
Specifications 50 0.55 1.05 2.16
55 0.54 1.05 2.18
• Recommended operating pressure: 8-60 psi (0,5-4,1 Bar) 60 0.54 1.05 2.18
• Flow Rates:
* Recommended operating pressure
- T-DPC02 – 0.5 GPH (1,9 LPH)
- T-DPC04 – 1.0 GPH (3,8 LPH)
- T-DPC08 – 2.0 GPH (7,6 LPH) NGE Performance Table—US
• Color-coded snap-on dust cap (0.5 Blue; 1.0 Black; 2.0 Red) T-DPC02 T-DPC04 T-DPC08
deters dust and insects from entering the emitter Nominal Flow Rate (Q) GPH 0.5 GPH 1.0 GPH 2.0 GPH
• Barbed inlet allows emitters to be installed directly onto hose Recom. Pressure Range (P) psi 8–60 psi
Emitter Exponent (x) 0.000 0.000 0.002
or used with ¼” (6mm) tubing
Coefficient of Variation (Cv) 3%
Warranty Min. Filtration Requirement 140 Mesh (105 Micron)
Optional Outlet -MA (Male Adapter) -DC (Snap-on Dust Cap)
• Two years Color (Cap) Blue Black Red
Specifying Information—NGE Emitter

NGE SF (Self-flushing) Pressure-compensating Turbulent Flow Emitter with Male Adapter
T-DPC02-MA 0.5 gph (2 LPH) NGE Self-flushing Pressure-compensating Emitter w/Male Adapter (black)
NGE SF (Self-flushing) Pressure-compensating Turbulent Flow Emitter with Dust Cap

T-DPC02-DC-BLUE 0.5 gph (2 LPH) NGE Self-flushing Pressure-compensating Emitter w/Dust Cap (blue)
T-DPC04-DC 1.0 gph (4 LPH) NGE Self-flushing Pressure-compensating Emitter w/Dust Cap (black)
T-DPC08-DC-RED 2.0 gph (8 LPH) NGE Self-flushing Pressure-compensating Emitter w/Dust Cap (red)
For precipitation rate information, please refer to pg. 164 131

Turbo-SC® Plus
Pressure-compensating Emitter
• 0.5 (1,9 LPH), 1.0 (3,8 LPH)
and 2.0 GPH (7,6 LPH)
• Self-Flushing
From the company that has pioneered so many Features & Benefits
drip irrigation innovations, the Toro® Turbo
SC Plus has an industry track record for proven Take-apart Feature
performance and affordability. Known as the DPJ Permits fast, easy on-site inspection and cleaning.
emitter, Turbo SC Plus offers the two features Large Self-flushing, Turbulent Flow Path
liked by so many users. Pressure-compensation For higher resistance to plugging where water
for system uniformity and “take-apart” for simple conditions may be a problem.
on site inspection.
Male Adapter With Bug Shield
Deters the entry of insects, but also can be used with
¼” (6,4mm) exit tubing for precision water placement.
Color-coded Base For Easy On-site

Identification
Blue – 0.5 GPH (1,9 LPH); Black – 1.0 GPH (3,8 LPH);
Red – 2.0 GPH (7,6 LPH).
Red
2.0 GPH
(8,0 LPH)
Black
1.0 GPH
Blue (4,0 LPH)
0.5 GPH
(2,0 LPH)
132
Pressure vs. Flow
Specifications
2.50
Specifications
• Proven PC (pressure-compensating) emitter design
2.00
• Barbed inlet allows emitters to be installed directly onto
hose or used with ¼” (6,4mm) tubing
Flow Rate (gph)
• High quality diaphragm for improved pressure DPJ08-A 1.50
compensation and uniformity over a wide range DPJ04-A
of pressure DPJ02-A 1.00
Warranty
• One year 0.50
0.00
5 10 15 20 25 30 35 40 45 50 55
Pressure (psi)
Flow Rate T-DPJ08-A T-DPJ04-A T-DPJ02-A

PSI T-DPJ02-A T-DPJ04-A T-DPJ08-A
5 0.42 0.73 1.41
10 0.44 0.97 1.80
15 0.47 0.96 2.00
20 0.49 0.97 2.12
Turbo-SC Performance Table—US
25 0.50 1.00 2.15
*30 0.51 1.01 2.15 T-DPJ02-A T-DPJ04-A T-DPJ08-A
35 0.51 1.01 2.11 Nominal Flow Rate (Q) GPH 0.5 GPH 1.0 GPH 2.0 GPH
40 0.50 1.00 2.04 Recom. Pressure Range (P) psi 10–50 psi
45 0.49 0.98 1.95 Emitter Exponent (x) 0.02 -0.04 0.01
50 0.47 0.95 1.84 Min. Filtration Requirement 140 Mesh (105 Micron)
55 0.45 0.91 Color (Base) Blue Black Red
Values listed in gallons per hour.
S p e c i f y i n g I n f o r m a t i o n — Tu r b o - S C P l u s
T-DPJ02-A-BLUE 0.5 gph (2 lph) Pressure-compensating Emitter w/Male Adapter (Blue)
T-DPJ04-A 1.0 gph (4 lph) Pressure-compensating Emitter w/Male Adapter (Black)
T-DPJ08-A-RED
2.0 gph (8 lph) Pressure-compensating Emitter w/Male Adapter (Red)

133
E-2® Classic Take Apart Emitter
• 1.0 (3,8 LPH), 2.0 (7,6 LPH) and 4.0 GPH (15,1 LPH)
• Barbed Inlet
• Non-Pressure-Compensating
• Color-coded
Features & Benefits
First introduced in 1972, the E-2 is considered the
take-apart emitter by which all others are measured. Fast Single Barb Installation
Install directly onto hose.
While there have been a few improvements over the
years, the E-2 emitter still provides accurate watering Large Open Flow Path
at an economical price. For resistance to plugging.
Take-apart Feature
Allows fast simple field inspection.
Red
2.0 GPH
Maroon
4.0 GPH
Black
1.0 GPH
Specifications
Specifications
• Flow Rates:
- T-DBK04-100 – 1.0 GPH (3,8 LPH)
- T-DBK08-RED-100 – 2.0 GPH (7,6 LPH)
- T-DBK16-MB-100 – 4.0 GPH (15,1 LPH)
• Proven Classic hydraulic design
• Economic emitter for trouble-free applications
• Barbed inlet allows emitters to be installed directly onto
hose or used with ¼” (6,4mm) leader tubing (T-EHD0437)
E-2 Emitter Flow Rate—US
• Exit barb may be used with 1/4” (6,4mm) exit tubing for
precision water placement psi T-DBK04 T-DBK08 T-DBK16
5 0.58 1.03 2.09
Warranty 10 0.88 1.53 3.08
• One year 15 1.12 1.93 3.87
20 1.33 2.27 4.55
25 1.52 2.58 5.15
30 1.70 2.87 5.71
35 1.87 3.13 6.23
40 2.03 3.38 6.71
45 2.17 3.62 7.17
50 2.32 3.84 7.61
T-DBK04 T-DBK08 T-DBK16 Values listed in gallons per hour.
Nominal Flow Rate (Q) GPH 1.06 GPH 2.11 GPH 4.23 GPH
@ 15 psi Specifying Information
Flow Coefficient (K) U.S. Units 0.22 0.41 0.85
psi 0–50 psi
E-2 Classic Emitter
Operating Pressure Range (P) Model No. Description
Bar 0–3,5 Bar
Flow Exponent (X) 0.60 0.57 0.56 T-DBK04-100 1.06 GPH (4,0 LPH) E-2 Emitter (Black)
Coefficient of Variation (Cv) ≤ 5% ≤ 6% ≤ 6.5% T-DBK08-RED-100 2.11 GPH (7,9 LPH) E-2 Emitter (Red)
Minimum Filtration Requirement 140 Mesh (105 Micron) T-DBK16-MB-100 4.23 GPH (16,0 LPH) E-2 Emitter (Maroon)

134
Pressure Regulating
Multi-Outlet Drip Manifold
• 9 Barbed Outlets
• Pressure-Regulating
The T-PR25-9 can be installed on any 1/2” Features & Benefits

(12mm) riser or fitting and easily converts
traditional spray systems to drip, micro spray, • Built-in 25 psi (1,7 Bar) pressure regulator delivers
or micro stream bubblers. consistent, reliable, low-volume irrigation
• Barbed outlets (9) accept ¼” (6,4mm) micro-tube &
emitters, micro-bubblers or micro-sprays – ideal for
mixed planting areas.
• Small shut-off caps provided with unit seal
unused outlets.
• When system is off, cover unthreads for access to screen
without disturbing ¼” (6,4mm) micro-tube connected
to outlets.
Specifications
Specifications
• ½” (13mm) FPT Inlet
• Operating Pressure: 20 – 100 psi (1,4-6,9 bar)
• Manifold Outlet Pressure: 21 – 28 psi (1,5-1,9 bar)
• Manifold Flow Range: 1 – 210 GPH (0.06-13.2 lpm)
• Individual Outlet Flow Range: 1 -20 GPH
(0.06-1.3 lpm)
• Barbed outlets accept ¼” (6,4mm) tubing:
ID: .170 - .188
Warranty
• One year
Pressure Regulating Drip Manifold
T-PR25-9 Pressure Regulating 9-outlet Drip Manifold
135
Drip Bubblers (Pressure Compensating)
• 2.0 (7,6 LPH) and 4.0 GPH (15,1 LPH)
• Effluent models
Toro’s new pressure-compensating ½” threaded Features & Benefits
Drip Bubblers are built to perform in tough
environments. Bringing commercial-grade Easy to Install
ruggedness to drip irrigation, they’re easy to install, Easily threads on to a ½” threaded riser. The self-
virtually maintenance-free, and are a more robust sealing screen eliminates the cost and labor of having
to use plumber’s tape on every riser.
alternative to traditional drip emitters connected
to ¼” tubing. The innovative design of these Easy to Maintain
Drip Bubblers combines the low flow rates of drip Self-cleaning mechanism flushes at every startup,
emitters with the ease of ½” PVC riser installation. A ensuring reliable operation and fewer maintenance
self-sealing screen eliminates the need for plumber’s headaches.
tape and the chloramine-stabilized silicone
Durable Construction
diaphragms assure long-term reliability with Commercial-grade plastic and chloramine-stabilized
potable or reclaimed water. Toro continues to set silicone diaphragm provide dependable UV- and
the standard for performance and durability in the chemical-resistant performance in the least forgiving
world of drip irrigation. of environments.
Pressure Compensating
Pressure compensating to 2 (7,6 LPH) and 4 GPH (15,1
LPH)over a range of 5-50 PSI.
Effluent Model
136
Specifications
Operating Range
• Flow Rates: 2.0 GPH & 4.0 GPH
• Pressure Compensation: 5 – 50 PSI
• Minimum Filtration Requirement: 80 Mesh
• ½” FIPT inlet; diffuser cap outlet
• Self-sealing screen eliminates need for plumber’s tape
• Self-cleaning flush at startup minimizes clogging and
maintenance
• Flow rate molded into the identification
• Commercial-grade plastic and chloramine-stabilized silicone Specifying Information — Drip Bubblers
diaphragm provide dependable UV- and chemical-resistant
performance Model Number Description
• Effluent and non-effluent models LF20-PC 2.0 GPH PC Bubbler
LF40-PC 4.0 GPH PC Bubbler
Warranty LF20-PCE 2.0 GPH PC Bubbler, Effluent
LF40-PCE 4.0 GPH PC Bubbler, Effluent
• Two years
137
Varis® and Varistake® Adjustable Emitters
• 0—14 GPH (53,0 LPH)

• Adjustable
• Maximum working pressure: 45 psi (3,1 Bar)
Varis and Varistake Adjustable Emmiters
Model List
Diameter of throw (maximum opening at 30 clicks):

PSI (Bar) At 1”(2,5cm) Height At 2.5”(6,3cm) Height
20 (1,4) 6” (15,2cm) 8” (20,3cm)
30 (2,1) 13.5” (34,3cm) 15.5” (39,4cm)
40 (2,8) 21” (53,3cm) 27” (68,6cm)
Varis and Varistake Flows:
PSI Flow Range
10 (0,6) 0-7 GPH (0-26,5 LPH)
20 (1,4) 0-10 GPH (0-37,9 LPH)
30 (2,1) 0-11 GPH (0-41,6 LPH)
Features & Benefits 40 (2,8) 0-14 GPH (0-53,0 LPH)
Available As Stake Assembly or As Barbed Emitter

Varistake connects to ¼” (6,4mm) micro-tube (T-EHD0437)
for precise placement at plant. Varis emitter installs directly
onto drip lateral.
Adjustable Flow Rate

Adjustable from 0 to 14 GPH (53 LPH) – makes this emitter Specifying Information—
ideal for potted and container plants. Va r i s a n d Va r i s t a k e E m i t t e r s
Easy To Maintain T-DAK05 Varis Adjustable Emitter with 1/4” (6,4mm) Barbed Inlet
T-DAK15 Varistake Adjustable Emitter with 4-3/4” (12cm) Stake and 1/4”
Green top unthreads completely to permit easy inspection (4mm) Barbed Inlet
and cleaning.
Pressure Regulators
Specifying Information—PC Regulators
Model Number Description
T-PMR15-LF 3/4”(20mm), 15 psi (73,2 kg/m²), 1/10-8 gpm (0,38-30,3
LPH)Low Flow Pressure Regulator
T-PMR25-LF 3/4” (20mm), 25 psi (122,0 kg/m²), 1/10-8 gpm (0,38-

30,3 LPH)Low Flow Pressure Regulator
T-PMR40-MF 3/4” (20mm), 40 psi (195,0 kg/m²), 2-20 gpm (7,6-75,7

LPH) Medium Flow Pressure Regulator
T-PR25-HF 1-1/4” (31,8mm) x 1” (25mm), 25 psi (122,0 LPH),

10 – 32 gpm (38,0-121,0 LPH), High Flow Pressure
Regulator
T-PMR25-MF 3/4” (20mm), 25 psi (122,0 kg/m²), 2 – 20 gpm (7,6-75,7

LPH), Medium Flow Pressure Regulator
138
Plastic Y-Filters
• ¾” (20mm), 1” (25mm), 1½” (40mm)

• 150 Mesh
Filtration for your drip system doesn’t have to Specifications

be difficult. Since low volume systems require Specifications
filtration for effective and efficient watering, • Recommended pressure range: 5 – 142 psi (0,3-9,8 Bar)
Toro® F-Series filters are designed to perform. • Flow Rate: 5 – 80 GPM (19-303 LPM)
• ¾” and 1” (20mm & 25mm) screen filters are available
in small- and large-size bodies
• Body and cap constructed of nylon
• Locking ring constructed of glass reinforced nylon
• O-ring constructed of Buna-N
Warranty
• One year
Features & Benefits
½” (13mm) Male Thread Outlet P l a s t i c Y- F i l t e r s ( D i s c )

With cap for quick flush cleaning. Specifying Information
Maximum Head Loss
Model Size Element Mesh Body
Easy Element Access Flow Curve
For trouble free maintenance. T-ALFD75150-L 3/4” 25 GPM Disc 150 Large B
(20mm) (94,6 LPH)
T-ALFD10150-L 1” 35 GPM Disc 150 Large C
Constructed Of Highest Quality Plastics (25mm) (132,5 LPH)
For durability and corrosion resistance. T-ALFD15150-L 1-1/2” 80 GPM Disc 150 Large D
(40mm) (302,8 LPH)
P l a s t i c Y- F i l t e r s ( S S S c r e e n )
Maximum Head Loss
Flow Curve
T-ALFS75150-S 3/4” 18 GPM Screen 150 Small A
(20mm) (68,1 LPH)
T-ALFS75150-L 3/4” 25 GPM Screen 150 Large B
(20mm) (94,6 LPH)
T-ALFS10150-S 1” 25 GPM Screen 150 Small B
(25mm) (94,6 LPH)
T-ALFS10150-L 1” 35 GPM Screen 150 Large C
(25mm) (132,5 LPH)
T-ALFS15150-L 1-1/2” 80 GPM Screen 150 Large D
(40mm) (302,8 LPH)
Replacement SS Screen/Disc Filter Elements Specifying Information

T-AMP-0004-4F 3/4” (20mm), 1” (25mm) and 1-1/2” (37mm) Disc 150 Large Body Size Filters
T-AMP0004-15 1/4” (6,4mm) and 1” (25mm) Screen 150 Small Body Size Filters
T-AMP000-2F 3/4” (20mm), 1” (25mm) and 1-1/2” (37mm) Screen 150 Large Body Size Filters
When installing the disc filters, the flow direction is opposite to the screen filter.
139
Drip Zone Valve Kits
• 3/4” (20mm) with AVB or 1” (25mm) inline
• Residential and Commercial
• Low Volume
Pre-packaged and ready for installation – Toro® Features & Benefits

Drip Zone Valve Kits provide everything you need
for drip zone automation. No need to specify or Everything You Need Is In The Kit
purchase separate parts. • Toro Y-Filter – protects against contamination.
• Control Valve – controls the flow of water
• Pressure Regulator – reduces system pressure to
levels suitable for drip irrigation
Specially Designed For Low-volume

Drip Applications
• These kits are a simple, one-stop package available in
¾” (20mm) and 1” (25mm) sizes
• Less valve kits also available
Reliable Valve Options

• TPV Series, 1” (25mm) Inline
• EZ-Flo® Plus, ¾” (20mm) AVB and 1”
(25mm) Inline
• Irritrol® 700 UltraFlow® Valve, 1” (25mm) Inline
Low Flow TPV Series Drip Zone Kits
140
Specifications Toro EZ-Flo Plus AVB* Toro TPV Irritrol® 700 UltraFlow In-line
Part Number DZK-EZF-075-LF DZK-EZF-075-MF DZK-TPV-1-LF DZK-TPV-1-MF DZK-700-1-LF DZK-700-1-MF

Drip Zone Valve Kit, Drip Zone Valve Kit, Drip Zone Valve Kit,
Drip Zone Valve Kit, Drip Zone Valve Drip Zone Valve
¾” (20mm) EZ-Flo 1” (25mm) 1” (25mm)
Description ¾” (20mm) EZ-Flo Kit, 1” (25mm), Kit, 1” (25mm),
Plus, AVB, 700 UltraFlow, 700 UltraFlow, In-line,
Plus, AVB, Low-flow Low-flow Medium-flow
Medium-flow In-line, Low-flow Medium-flow
Connection Size ¾” (20mm) ¾” (20mm) 1” (25mm) 1” (25mm) 1” (25mm) 1” (25mm)
Control Valve Solenoid 24VAC, Inrush: 0.4 amps, 11.5 VA, Holding 0.20 amps, 5.75 VA
Minimum Flow Rate 0.25 GPM (0,9 LPM) 2 GPM (7,6 LPM) 0.10 GPM (0,4 LPM) 2 GPM (7,6 LPM) 0.10 GPM (0,4 LPM) 2 GPM (7,6 LPM)
Maximum Flow Rate 8 GPM (30 LPM) 20 GPM (76 LPM) 8 GPM (30 LPM) 20 GPM (76 LPM) 8 GPM (30 LPM) 20 GPM (76 LPM)
Maximum Pressure 150 psi (10 Bar) 150 psi (10 Bar) 150 psi (10 Bar) 150 psi (10 Bar) 150 psi (10 Bar) 150 psi (10 Bar)
150 mesh/100 150 mesh/100 150 mesh/100 150 mesh/100 150 mesh/100
Y-Filter Degree of Filtration 150 mesh/100 Microns
Microns Microns Microns Microns Microns
Regulator-Preset Pressure 25 psi (1,7 Bar) 25 psi (1,7 Bar) 25 psi (1,7 Bar) 25 psi (1,7 Bar) 25 psi (1,7 Bar) 25 psi (1,7 Bar)
Thread Connection-
Female NPT Female NPT Female NPT Female NPT Female NPT Female NPT
Upstream
Thread Connection-
Female NPT Female NPT Male NPT Female NPT Male NPT Female NPT
Downstream
Minimum Number of
Emitters:
30 240 12 240 12 240
0.5 GPH (1,9 LPM)
15 120 6 120 6 120
1 GPH (3,8 LPM)
8 60 3 60 3 60
2 GPH (7,6 LPM)
Maximum Number of
Emitters:
960 2400 960 2400 960 2400
0.5 GPH (1,9 LPM)
490 1200 490 1200 490 1200
1 GPH (3,8 LPM)
240 600 240 600 240 600
2 GPH (7,6 LPM)
Note: Consult your local plumbing code for backflow

prevention requirements.
* AVB = Atmospheric Vacuum Breaker (Anti-siphon Valve)
Toro Drip Zone Valve Kits Model List

Model Description Flow vs. Friction Loss
Part Number GPM (Flow) 0.25 5 8 15 20
• DZK-EZF-075-LF Drip Zone Kit: 3/4” (20mm) EZ-Flo Plus Valve,
AVB, Filter, Low-flow Regulator & Fittings Friction Loss (psi) 3 5 5 n/a n/a
DZK-EZF-075-LF
• DZK-EZF-075-MF Drip Zone Kit: 3/4” (20mm) EZ-Flo Plus Valve, Min. Inlet Press. (psi) 30 32 32 34 39
AVB, Filter, Medium-flow Regulator & Fittings
• DZK-EZF-1-LF Drip Zone Kit: 1” EZ-Flo Plus, Filter, Low-flow Friction Loss (psi) 3 5 5 7 13
DZK-EZF-075-MF
Regulator & Fittings Min. Inlet Press. (psi) 30 32 32 34 39
• DZK-EZF-1-MF Drip Zone Kit: 1” EZ-Flo Plus, Filter, Medium
Flow Regulator & Fittings Friction Loss (psi) 2 3.5 3.7 3 3.3
DZK-TPV-1-LF
• DZK-TPV-1-LF Drip Zone Kit: 1” (25mm) TPV, Filter, Low-flow Min. Inlet Press. (psi) 30 32 32 34 39
Regulator & Fittings
Friction Loss (psi) 2 3.5 3.7 3 3.3
• DZK-TPV-1-MF Drip Zone Kit: 1” (25mm) TPV, Filter, Medium- DZK-TPV-1-MF
flow Regulator & Fittings Min. Inlet Press. (psi) 30 32 32 32 35
• DZK-700-1-LF Drip Zone Kit: 1” (25mm) 700 UltraFlow Inline
Friction Loss (psi) 3 3 3 n/a n/a
Valve, Filter, Low-flow Regulator &Fittings DZK-700-1-LF
• DZK-700-1-MF Drip Zone Kit: 1” (25mm) 700 UltraFlow Inline Min. Inlet Press. (psi) 30 30 30 32 34
Valve, Filter, Medium-flow Regulator & Fittings
Friction Loss (psi) 3 3 3 4.5 7
• DZK-X-075-LF Drip Zone Kit less valve with Filter, Low-flow DZK-700-1-MF
Regulator & Fittings Min. Inlet Press. (psi) 30 30 30 32 34
• DZK-X-075-MF Drip Zone Kit less valve with Filter,
Medium-flow Regulator & Fittings
S p e c i f y i n g I n f o r m a t i o n — D r i p Z o n e Va l v e K i t s
DZK-XXXXXX-XX
Kit Valve Type Flow Rate
DZK XXXXXX XX
DZK—Drip Zone Kit EZF-075—3⁄4” (20mm) EZ-Flo Plus AVB LF—Low Flow
EZF-1—1” (25mm) EZ-Flo Plus AVB MF—Medium Flow
TPV-1—1” (25mm) TPV
700-1—1” (25mm) In-line
X-075—3/4”, No Valve
Example: A Drip Zone Kit with a 700 Series UltraFlow, 1” (25mm) commercial valve would be specified as: DZK-700-1-LF
141
Customer Support
Toro Technical Support Toro NSN®

1-877-345-8676 1-888-676-8676/www.toronsn.com
Toro Controller Repair Order Services

1-877-345-8676 1-800-654-1882
www.toro.com/irrigation www.youtube.com/user/
toro/featured
www.torocontractor.com www.torowatersmart.com
142
Formulas and Conversion Factors
Precipitation Rates
U.S. (Spacing in feet) Metric (Spacing in meters)
Equilateral Triangular Spacing
P.R.= (GPM of 360) x 96.25 P.R.= m3/hr of 360 x 1000
(in/hr) (Head Spacing)2 x .866 (mm/hr) (Head Spacing)2 x .866
Square/Rectangular Spacing
P.R.= (GPM of 360) x 96.25 P.R.= m3/hr of 360 x 1000
(in/hr) Head Spacing x Row Spacing (mm/hr) Head Spacing x Row Spacing
Square/Rectangular Spacing for Specific Arc

P.R.= 34650 x GPM (for any arc) P.R.= m3/hr (for any arc) x 1000
(in/hr) Degrees of Arc x Head Spacing x Row Spacing (mm/hr) Degrees of Arc x Head Spacing x Row Spacing
Horsepower
H.P. = GPM x Ft of Head H.P. = LPM x Meters of Head
3,960 x Pump Efficiency 3,433 x Pump Efficiency
(expressed as a decimal) (expressed as a decimal)
Station Run Time

S.R.T. = Total Weekly Req’d (inch/wk) x 60 (min/hr) S.R.T. = Total Weekly Req’d (mm/wk) x 60 (min/hr)
(min/wk) Precipitation Rate (in/hr) (min/wk) Precipitation Rate (mm/hr)
Pipe Velocity
V= 0.4085 x Flow (GPM) V= 1273.24 x Flow (l/sec)
(ft/sec) (Inside Pipe Diameter in Inches) 2 (m/sec) (Inside Pipe Diameter in Millimeters) 2
Slope
S= Rise (Measure of Length)
Run (Measure of Length)
To Convert From To Multiply By To Convert From To Multiply By

Area acres feet2 43560 Pressure psi kilopascals 6.89476
acres meters2 4046.8 psi bars .068948
meters2 feet2 10.764 bars kilopascals 100
feet2 inches2 144 psi feet of head 2.31
inches2 centimeters2 6.452
hectares meters2 10,000 Velocity feet/second meters/second .3048
hectares acres 2.471
Volume feet3 gallons 7.481
Power kilowatts horsepower 1.3410 feet3 liters 28.32
meters3 feet3 35.31
Flow feet3/minutes meters3/second 0.0004719 meters3 yard3 1.3087
feet3/second meters3/second .02832 yards3 feet3 27
yards3/minute meters3/second .01274 yards3 gallons 202
gallons/minute meters3/hour .22716 acres/feet feet3 43,560
gallons/minute liters/minute 3.7854 gallons meters3 .003785
gallons/minutes liters/second .06309 gallons liters 3.785
meters3/hour liters/minute 16.645 imperial gallons gallons 1.833
meters3/hour liters/second .2774
liters/minute liters/second 60
Length feet inches 12

inches centimeters 2.540
feet meters .30481
kilometers miles .6214
miles feet 5280
miles meters 1609.34
millimeters inch .03937
143
Sprinkler Spacing and Winterization Specifications
Sprinkler Spacing
• The Toro Company does not recommend designing for 0 mph wind conditions.
Design in consideration of the worst wind conditions.
Precipitation Rate Formulas

Winterization
Specifications
• Square-spaced sprinklers in pattern:
In freezing climates, sprinklers and
GPM of full circle x 96.3 valves should be properly
winterized to prevent
(Spacing)2
freeze-related damage.
• Triangular-spaced sprinklers in pattern:
GPM of full circle x 96.3

(Spacing)2 (0.866)
• Single row:
Scallop
GPM of full circle x 96.3 Spacing
(Spacing) (Scallop)
• Area and flow:
Total GPM of zone x 96.3

Total irrigated
square feet of zone
friction loss formulas
Hazen-Williams Equation: The velocity values were derived using the following:
(The result is multiplied by .433 to give psi loss for 100 (The average inside diameter of OD controlled pipe was
feet of pipe) based upon subtracting two times the minimum wall
thickness plus one-half of the wall thickness tolerance
from the outside diameter.)
• Pressure ratings for plastic pipes are based on 23° C or 73.4° F

• Head loss decreases (increases) approximately 1% for every 3 degrees F above (below) the reference temperature (73.4° F)
144
Friction Loss Characteristics
Losses in psi per 100 feet of hose (psi/100 ft.) for hose sizes: .509” (13mm) ID through .627” (16mm) ID
Part No. EHD1335 EHD1348 EHD1350 EHD1443 EHD1554 EHD1635 EHD1642 EHD1645
Nom. ID 0.509” 0.510” 0.520” 0.550” 0.572” 0.616” 0.627” 0.616”
Min. ID 0.506” 0.510” 0.516” 0.547” 0.569” 0.613” 0.624” 0.613”
Min. Wall 0.035” 0.048” 0.050” 0.043” 0.054” 0.035” 0.042” 0.045”
Flow Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss
GPM GPH FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI
0.5 30 0.80 0.37 0.79 0.35 0.77 0.34 0.68 0.25 0.63 0.21 0.54 0.14 0.52 0.13 0.54 0.14
1.0 60 1.60 1.33 1.57 1.28 1.53 1.21 1.37 0.91 1.26 0.75 1.09 0.52 1.05 0.48 1.09 0.52
1.5 90 2.39 2.82 2.36 2.71 2.30 2.56 2.05 1.93 1.89 1.59 1.63 1.11 1.57 1.02 1.63 1.11
2.0 120 3.19 4.80 3.14 4.62 3.07 4.37 2.73 3.29 2.52 2.71 2.17 1.89 2.10 1.73 2.17 1.89
2.5 150 3.99 7.26 3.93 6.99 3.84 6.60 3.41 4.97 3.15 4.10 2.72 2.85 2.62 2.62 2.72 2.85
3.0 180 4.79 10.18 4.71 9.80 4.60 9.26 4.10 6.97 3.79 5.75 3.26 4.00 3.15 3.67 3.26 4.00
3.5 210 5.58 13.55 5.50 13.04 5.37 12.31 4.78 9.27 4.42 7.65 3.80 5.32 3.67 4.88 3.80 5.32
4.0 240 6.38 17.35 6.28 16.69 6.14 15.77 5.46 11.87 5.05 9.79 4.35 6.81 4.20 6.25 4.35 6.81
4.5 270 7.18 21.57 7.07 20.76 6.90 19.61 6.14 14.76 5.68 12.18 4.89 8.48 4.72 7.77 4.89 8.48
5.0 300 7.98 26.22 7.85 25.24 7.67 23.84 6.83 17.94 6.31 14.81 5.44 10.30 5.25 9.45 5.44 10.30
6.0 360 9.57 36.75 9.42 35.37 9.21 33.41 8.19 25.15 7.57 20.75 6.52 14.44 6.29 13.24 6.52 14.44
7.0 420 11.17 48.90 10.99 47.06 10.74 44.45 9.56 33.46 8.83 27.61 7.61 19.21 7.34 17.62 7.61 19.21
8.0 480 12.56 60.26 12.27 56.92 10.92 42.85 10.09 35.36 8.70 24.60 8.39 22.56 8.70 24.60
9.0 540 14.13 74.95 13.81 70.80 12.29 53.29 11.36 43.98 9.78 30.60 9.44 28.06 9.78 30.60
10.0 600 13.65 64.77 12.62 53.45 10.87 37.19 10.49 34.11 10.87 37.19
11.0 660 13.88 63.77 11.96 44.37 11.54 40.69 11.96 44.37
ID120 720 15.14 74.93 12.59 47.81 13.05 52.13
Losses in psi per 100 feet of hose (psi/100 ft.) for hose sizes: .726” (18mm) ID through 1.360” (35mm) ID
Part No. EHD1845 EHD1847 EHD1850 EHD2052 EHD2057 EHD2662 EHD2667 EHD3580
Nom. ID 0.710” 0.729” 0.729” 0.807” 0.807” 1.060” 1.060” 1.365”
Min. ID 0.707” 0.726” 0.726” 0.804” 0.804” 1.056” 1.056” 1.360”
Min. Wall 0.045” 0.047” 0.050” 0.052” 0.057” 0.062” 0.067” 0.084”
Flow Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss Velocity Loss
GPM GPH FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI FPS PSI
1 60 0.82 0.26 0.78 0.23 0.78 0.23 0.63 0.14 0.63 0.14 0.37 0.04 0.37 0.04 0.22 0.01
2 120 1.63 0.94 1.55 0.83 1.55 0.83 1.26 0.50 1.26 0.50 0.73 0.13 0.73 0.13 0.44 0.04
3 180 2.45 2.00 2.33 1.75 2.33 1.75 1.90 1.07 1.90 1.07 1.10 0.28 1.10 0.28 0.66 0.08
4 240 3.27 3.40 3.10 2.99 3.10 2.99 2.53 1.82 2.53 1.82 1.47 0.48 1.47 0.48 0.88 0.14
5 300 4.09 5.14 3.88 4.52 3.88 4.52 3.16 2.75 3.16 2.75 1.83 0.73 1.83 0.73 1.10 0.21
6 360 4.90 7.21 4.65 6.34 4.65 6.34 3.79 3.85 3.79 3.85 2.20 1.02 2.20 1.02 1.33 0.30
7 420 5.72 9.59 5.43 8.43 5.43 8.43 4.42 5.13 4.42 5.13 2.56 1.36 2.56 1.36 1.55 0.40
8 480 6.54 12.28 6.20 10.79 6.20 10.79 5.06 6.57 5.06 6.57 2.93 1.74 2.93 1.74 1.77 0.51
9 540 7.36 15.27 6.98 13.42 6.98 13.42 5.69 8.17 5.69 8.17 3.30 2.16 3.30 2.16 1.99 0.63
10 600 8.17 18.57 7.75 16.32 7.75 16.32 6.32 9.93 6.32 9.93 3.66 2.63 3.66 2.63 2.21 0.77
11 660 8.99 22.15 8.53 19.47 8.53 19.47 6.95 11.84 6.95 11.84 4.03 3.14 4.03 3.14 2.43 0.92
12 720 9.81 26.02 9.30 22.87 9.30 22.87 7.58 13.91 7.58 13.91 4.40 3.69 4.40 3.69 2.65 1.08
13 780 10.62 30.18 10.08 26.52 10.08 26.52 8.22 16.14 8.22 16.14 4.76 4.28 4.76 4.28 2.87 1.25
14 858 11.69 36.04 11.09 31.68 11.09 31.68 9.04 19.27 9.04 19.27 5.24 5.11 5.24 5.11 3.16 1.49
15 920 12.54 41.01 11.89 36.04 11.98 36.04 9.69 21.93 9.69 21.93 5.62 5.81 5.62 5.81 3.39 1.70
16 982 13.38 46.27 12.69 40.66 12.69 40.66 10.35 24.74 10.35 24.74 6.00 6.56 6.00 6.56 3.62 1.91
17 1,044 14.23 51.82 13.49 45.54 13.49 45.54 11.00 27.71 11.00 27.71 6.38 7.34 6.38 7.34 3.84 2.14
18 1,080 13.95 48.46 13.95 48.46 11.38 29.48 11.38 29.48 6.59 7.81 6.59 7.81 3.98 2.28
19 1,140 14.73 53.56 14.73 53.56 12.01 32.59 12.01 32.59 6.96 8.64 6.96 8.64 4.20 2.52
20 1,200 12.64 35.83 12.64 35.83 7.33 9.50 7.33 9.50 4.42 2.77
22 1,320 13.90 42.75 13.90 42.75 8.06 11.33 8.06 11.33 4.86 3.31
24 1,440 15.17 50.23 15.17 50.23 8.79 13.31 8.79 13.31 5.30 3.88
26 1,560 16.43 58.25 16.43 58.25 9.52 15.44 9.52 15.44 5.74 4.50
28 1,680 17.69 66.82 17.69 66.82 10.26 17.71 10.26 17.71 6.18 5.17
30 1,800 18.96 75.93 18.96 75.93 10.99 20.13 10.99 20.13 6.63 5.87
32 1,920 20.22 85.57 11.72 22.68 11.72 22.68 7.07 6.62
34
2,040 12.45
25.38 12.45
25.38 7.51
7.40
36
2,160 13.19
28.21 13.19
28.21 7.95
8.23
38
2,280 13.92
31.18 13.92
31.18 8.39
9.10
40
2,400 14.65
34.29 14.65
34.29 8.83
10.00
45
2,700 16.48
42.65 16.48
42.65 9.94
12.44
50
3,000 18.32
51.84 18.32
51.84 11.04
15.12
55
3,300 20.15
61.84 20.15
61.84 12.15
18.04
Shaded area represents velocities over 5 fps.
60
3,600 21.98
72.66 21.98
72.66 13.25
21.19
65 Use with caution.
3,900 23.81
84.27 14.36
24.58
70
4,200 15.46 28.19
75
4,500 16.56
32.04
80
4,800 17.67
36.11
85
5,100 18.77
40.40
90
5,400 19.88
44.91
95
5,700 20.98
49.64
Friction losses are calculated using Hazen-Williams equation (C = 140) and minimum inside diameter. See pg 148 for friction loss formulas.
145
Losses in psi per 100 feet of hose (psi/100 ft.) for hose sizes: .596” (16mm) ID through .870” (22mm) ID
Part No. EHO1650 EHO2055 EHO2060 HDO2255
Nom. ID 0.600” 0.830” 0.820” 0.870”
Min. ID 0.596” 0.821” 0.811” 0.870”
Nom. Wall 0.050” 0.055” 0.060” 0.055”
Flow Velocity Loss Velocity Loss Velocity
Loss Velocity Loss
GPM GPH FPS PSI FPS PSI FPS PSI FPS PSI
0.5 30 0.58 0.17 0.30 0.03 0.31 0.04 0.27 0.03
1.0 60 1.15 0.60 0.61 0.13 0.62 0.13 0.54 0.10
1.5 90 1.73 1.27 0.91 0.27 0.93 0.28 0.81 0.20
2.0 120 2.30 2.16 1.21 0.46 1.24 0.48 1.08 0.34
2.5 150 2.88 3.27 1.52 0.69 1.55 0.73 1.35 0.52
3.0 180 3.45 4.59 1.82 0.96 1.86 1.02 1.62 0.73
3.5 210 4.03 6.10 2.12 1.28 2.17 1.36 1.89 0.97
4.0 240 4.60 7.82 2.42 1.64 2.48 1.74 2.16 1.24
4.5 270 5.18 9.72 2.73 2.04 2.79 2.17 2.43 1.54
5.0 300 5.75 11.81 3.03 2.48 3.11 2.64 2.70 1.87
6.0 360 6.90 16.56 3.64 3.48 3.73 3.69 3.24 2.62
7.0 420 8.05 22.03 4.24 4.63 4.35 4.92 3.78 3.49
8.0 480 9.20 28.21 4.85 5.93 4.97 6.29 4.32 4.47
9.0 540 10.35 35.09 5.45 7.38 5.59 7.83 4.86 5.56
10.0 600 11.50 42.65 6.06 8.96 6.21 9.52 5.40 6.76
11.0 660 12.65 50.89 6.67 10.70 6.83 11.35 5.94 8.06
12.0 720 13.80 59.78 7.27 12.57 7.45 13.34 6.48 9.47
13.0 780 7.88 14.57 8.07 15.47 7.02 10.99
14.0 840 8.48 16.72 8.70 17.75 7.56 12.61
15.0 900 9.09 19.00 9.32 20.16 8.10 14.32
16.0 960 9.70 21.41 9.94 22.72 8.64 16.14
17.0 1,020 10.30 23.95 10.56 25.42 9.17 18.06
18.0 1,080 10.91 26.63 11.18 28.26 9.71 20.08
Shaded area represents
19.0 1,140 11.51 29.43 11.80 31.24 10.25 22.19
velocities over 5 fps.
20.0 1,200 12.12 32.36 12.42 34.35 10.79 24.40
Use with caution.

22.0 1,320 13.33 38.61 13.66 40.98 11.87 29.11
24.0 1,440 14.55 45.36 14.91 48.15 12.95 34.20
26.0 1,560 15.76 52.61 16.15 55.84 14.03 39.67
28.0 1,680 16.97 60.35 15.11 45.51
30.0 1,800 16.19 51.71
32.0 1,920 17.27 58.27
Friction losses are calculated using Hazen-Williams equation (C = 140) and minimum inside diameter. See pg 148 for friction loss formulas.
146
POLyeTHYLENE (PE) PLASTIC PIPE ID CONTROLLED
Size: ½” thru 4” Flow: 1 thru 500GPM
PE 3408 ASTM D-2239 C=140 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”
Avg ID 0.622 0.824 1.049 1.380 1.610 2.067 2.469 3.068 4.026
Flow Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI
GPM FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss
1 1.05 0.49 0.60 0.12 0.37 0.04 0.21 0.01 0.16 0.00
2 2.11 1.76 1.20 0.45 0.74 0.14 0.43 0.04 0.31 0.02 0.19 0.01
3 3.16 3.73 1.80 0.95 1.11 0.29 0.64 0.08 0.47 0.04 0.29 0.01
4 4.22 6.35 2.40 1.62 1.48 0.50 0.86 0.13 0.63 0.06 0.38 0.02 0.27 0.01
5 5.27 9.60 3.00 2.44 1.85 0.76 1.07 0.20 0.79 0.09 0.48 0.03 0.33 0.01
6 6.33 13.46 3.61 3.43 2.22 1.06 1.29 0.28 0.94 0.13 0.57 0.04 0.40 0.02 0.26 0.01
7 7.38 17.91 4.21 4.56 2.60 1.41 1.50 0.37 1.10 0.18 0.67 0.05 0.47 0.02 0.30 0.01
8 8.44 22.93 4.81 5.84 2.97 1.80 1.71 0.47 1.26 0.22 0.76 0.07 0.54 0.03 0.35 0.01
9 9.49 28.52 5.41 7.26 3.34 2.24 1.93 0.59 1.42 0.28 0.86 0.08 0.60 0.03 0.39 0.01
10 10.55 34.67 6.01 8.82 3.71 2.73 2.14 0.72 1.57 0.34 0.95 0.10 0.67 0.04 0.43 0.01
12 7.21 12.37 4.45 3.82 2.57 1.01 1.89 0.48 1.15 0.14 0.80 0.06 0.52 0.02
14 8.41 16.45 5.19 5.08 3.00 1.34 2.20 0.63 1.34 0.19 0.94 0.08 0.61 0.03
16 9.61 21.07 5.93 6.51 3.43 1.71 2.52 0.81 1.53 0.24 1.07 0.10 0.69 0.04 0.40 0.01
18 10.82 26.21 6.67 8.10 3.86 2.13 2.83 1.01 1.72 0.30 1.20 0.13 0.78 0.04 0.45 0.01
20 12.02 31.85 7.42 9.84 4.28 2.59 3.15 1.22 1.91 0.36 1.34 0.15 0.87 0.05 0.50 0.01
22 8.16 11.74 4.71 3.09 3.46 1.46 2.10 0.43 1.47 0.18 0.95 0.06 0.55 0.02
24 8.90 13.79 5.14 3.63 3.78 1.72 2.29 0.51 1.61 0.21 1.04 0.07 0.60 0.02
26 9.64 16.00 5.57 4.21 4.09 1.99 2.48 0.59 1.74 0.25 1.13 0.09 0.65 0.02
28 10.38 18.35 6.00 4.83 4.41 2.28 2.67 0.68 1.87 0.28 1.21 0.10 0.70 0.03
30 11.12 20.85 6.43 5.49 4.72 2.59 2.86 0.77 2.01 0.32 1.30 0.11 0.76 0.03
32 11.86 23.50 6.86 6.19 5.04 2.92 3.06 0.87 2.14 0.36 1.39 0.13 0.81 0.03
34 12.61 26.29 7.28 6.92 5.35 3.27 3.25 0.97 2.28 0.41 1.47 0.14 0.86 0.04
36 7.71 7.69 5.67 3.63 3.44 1.08 2.41 0.45 1.56 0.16 0.91 0.04
38 8.14 8.50 5.98 4.02 3.63 1.19 2.54 0.50 1.65 0.17 0.96 0.05
40 8.57 9.35 6.30 4.42 3.82 1.31 2.68 0.55 1.73 0.19 1.01 0.05
42 9.00 10.24 6.61 4.83 4.01 1.43 2.81 0.60 1.82 0.21 1.06 0.06
44 9.43 11.16 6.93 5.27 4.20 1.56 2.94 0.66 1.91 0.23 1.11 0.06
46 9.86 12.12 7.24 5.72 4.39 1.70 3.08 0.71 1.99 0.25 1.16 0.07
48 10.28 13.11 7.56 6.19 4.58 1.84 3.21 0.77 2.08 0.27 1.21 0.07
50 10.71 14.14 7.87 6.68 4.77 1.98 3.35 0.83 2.17 0.29 1.26 0.08
55 11.78 16.87 8.66 7.97 5.25 2.36 3.68 0.99 2.38 0.35 1.38 0.09
60 12.85 19.82 9.44 9.36 5.73 2.77 4.02 1.17 2.60 0.41 1.51 0.11
65 10.23 10.86 6.21 3.22 4.35 1.36 2.82 0.47 1.64 0.13
70 11.02 12.45 6.68 3.69 4.69 1.55 3.03 0.54 1.76 0.14
75 11.81 14.15 7.16 4.19 5.02 1.77 3.25 0.61 1.89 0.16
80 12.59 15.95 7.64 4.73 5.35 1.99 3.47 0.69 2.01 0.18
85 13.38 17.84 8.12 5.29 5.69 2.23 3.68 0.77 2.14 0.21
90 8.59 5.88 6.02 2.48 3.90 0.86 2.27 0.23
95 9.07 6.50 6.36 2.74 4.12 0.95 2.39 0.25
100 9.55 7.15 6.69 3.01 4.33 1.05 2.52 0.28
110 10.50 8.53 7.36 3.59 4.77 1.25 2.77 0.33
120 11.46 10.02 8.03 4.22 5.20 1.47 3.02 0.39
130 12.41 11.62 8.70 4.89 5.63 1.70 3.27 0.45
140 13.37 13.33 9.37 5.61 6.07 1.95 3.52 0.52
150 10.04 6.38 6.50 2.22 3.78 0.59
160 10.71 7.19 6.94 2.50 4.03 0.67
170 11.38 8.04 7.37 2.79 4.28 0.74
180 12.05 8.94 7.80 3.11 4.53 0.83
190 12.72 9.88 8.24 3.43 4.78 0.92
200 13.39 10.87 8.67 3.78 5.03 1.01
220 9.54 4.50 5.54 1.20
240 Shaded area represents velocities over 5 fps. 10.40 5.29 6.04 1.41
260 11.27 6.14 6.54 1.64
280 Use with caution. 12.14 7.04 7.05 1.88
300 13.00 8.00 7.55 2.13
320 13.87 9.02 8.05 2.40
340 8.56 2.69
360 9.06 2.99
380 9.57 3.30
400 10.07 3.63
420 10.57 3.98
440 11.08 4.33
460 11.58 4.71
480 12.08 5.09
500 12.59 5.49
See pg 148 for friction loss formulas
147
PVC CLASS 200 IPS PLASTIC PIPE
ASTM D-2241 (1120, 1220) SDR 21 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4” 6”
Avg.ID 0.696 0.910 1.169 1.482 1.700 2.129 2.581 3.146 4.046 5.955
Pipe OD 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625
Avg Wall 0.072 0.070 0.073 0.089 0.100 0.123 0.147 0.177 0.227 0.335
MinWall 0.062 0.060 0.063 0.079 0.090 0.113 0.137 0.167 0.214 0.316
Flow Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI
GPM FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss
1 0.84 0.25 0.49 0.07 0.30 0.02 0.19 0.01 0.14 0.00
2 1.68 0.90 0.99 0.24 0.60 0.07 0.37 0.02 0.28 0.01 0.18 0.00
3 2.53 1.90 1.48 0.52 0.90 0.15 0.56 0.05 0.42 0.02 0.27 0.01
4 3.37 3.24 1.97 0.88 1.19 0.26 0.74 0.08 0.56 0.04 0.36 0.01 0.24 0.01
5 4.21 4.89 2.46 1.33 1.49 0.39 0.93 0.12 0.71 0.06 0.45 0.02 0.31 0.01
6 5.05 6.86 2.96 1.86 1.79 0.55 1.11 0.17 0.85 0.09 0.54 0.03 0.37 0.01 0.25 0.00
7 5.90 9.12 3.45 2.47 2.09 0.73 1.30 0.23 0.99 0.12 0.63 0.04 0.43 0.02 0.29 0.01
8 6.74 11.68 3.94 3.17 2.39 0.94 1.49 0.30 1.13 0.15 0.72 0.05 0.49 0.02 0.33 0.01
9 7.58 14.53 4.43 3.94 2.69 1.17 1.67 0.37 1.27 0.19 0.81 0.06 0.55 0.02 0.37 0.01
10 8.42 17.66 4.93 4.79 2.99 1.42 1.86 0.45 1.41 0.23 0.90 0.08 0.61 0.03 0.41 0.01
12 10.11 24.75 5.91 6.71 3.58 1.98 2.23 0.63 1.69 0.32 1.08 0.11 0.73 0.04 0.49 0.02
14 11.79 32.93 6.90 8.93 4.18 2.64 2.60 0.83 1.98 0.43 1.26 0.14 0.86 0.06 0.58 0.02
16 13.48 42.16 7.88 11.44 4.78 3.38 2.97 1.07 2.26 0.55 1.44 0.18 0.98 0.07 0.66 0.03 0.40 0.01
18 15.16 52.44 8.87 14.23 5.37 4.21 3.34 1.33 2.54 0.68 1.62 0.23 1.10 0.09 0.74 0.03 0.45 0.01
20 9.85 17.29 5.97 5.11 3.72 1.61 2.82 0.83 1.80 0.28 1.22 0.11 0.82 0.04 0.50 0.01
22 10.84 20.63 6.57 6.10 4.09 1.92 3.11 0.99 1.98 0.33 1.35 0.13 0.91 0.05 0.55 0.01
24 11.82 24.24 7.17 7.17 4.46 2.26 3.39 1.16 2.16 0.39 1.47 0.15 0.99 0.06 0.60 0.02
26 12.81 28.11 7.76 8.31 4.83 2.62 3.67 1.34 2.34 0.45 1.59 0.18 1.07 0.07 0.65 0.02
28 13.80 32.25 8.36 9.53 5.20 3.01 3.95 1.54 2.52 0.52 1.71 0.20 1.15 0.08 0.70 0.02
30 14.78 36.64 8.96 10.83 5.57 3.41 4.24 1.75 2.70 0.59 1.84 0.23 1.24 0.09 0.75 0.03
32 9.55 12.21 5.94 3.85 4.52 1.97 2.88 0.66 1.96 0.26 1.32 0.10 0.80 0.03 0.37 0.00
34 10.15 13.66 6.32 4.31 4.80 2.21 3.06 0.74 2.08 0.29 1.40 0.11 0.85 0.03 0.39 0.00
36 10.75 15.18 6.69 4.79 5.08 2.45 3.24 0.82 2.20 0.32 1.48 0.12 0.90 0.04 0.41 0.01
38 11.35 16.78 7.06 5.29 5.36 2.71 3.42 0.91 2.33 0.36 1.57 0.14 0.95 0.04 0.44 0.01
40 11.94 18.45 7.43 5.82 5.65 2.98 3.60 1.00 2.45 0.39 1.65 0.15 1.00 0.04 0.46 0.01
42 12.54 20.20 7.80 6.37 5.93 3.27 3.78 1.09 2.57 0.43 1.73 0.16 1.05 0.05 0.48 0.01
44 13.14 22.02 8.17 6.94 6.21 3.56 3.96 1.19 2.69 0.47 1.81 0.18 1.10 0.05 0.51 0.01
46 13.73 23.91 8.55 7.54 6.49 3.86 4.14 1.29 2.82 0.51 1.90 0.19 1.15 0.06 0.53 0.01
48 14.33 25.87 8.92 8.15 6.78 4.18 4.32 1.40 2.94 0.55 1.98 0.21 1.20 0.06 0.55 0.01
50 14.93 27.90 9.29 8.79 7.06 4.51 4.50 1.51 3.06 0.59 2.06 0.23 1.25 0.07 0.58 0.01
55 10.22 10.49 7.76 5.38 4.95 1.80 3.37 0.71 2.27 0.27 1.37 0.08 0.63 0.01
60 11.15 12.33 8.47 6.32 5.40 2.11 3.67 0.83 2.47 0.32 1.50 0.09 0.69 0.01
65 12.07 14.30 9.18 7.33 5.85 2.45 3.98 0.96 2.68 0.37 1.62 0.11 0.75 0.02
70 13.00 16.40 9.88 8.41 6.30 2.81 4.29 1.10 2.89 0.42 1.74 0.12 0.81 0.02
75 13.93 18.63 10.59 9.56 6.75 3.20 4.59 1.25 3.09 0.48 1.87 0.14 0.86 0.02
80 14.86 21.00 11.29 10.77 7.20 3.60 4.90 1.41 3.30 0.54 1.99 0.16 0.92 0.02
85 12.00 12.05 7.65 4.03 5.21 1.58 3.50 0.60 2.12 0.18 0.98 0.03
90 12.71 13.40 8.10 4.48 5.51 1.76 3.71 0.67 2.24 0.20 1.04 0.03
95 13.41 14.81 8.55 4.95 5.82 1.94 3.92 0.74 2.37 0.22 1.09 0.03
100 14.12 16.28 9.00 5.45 6.12 2.13 4.12 0.81 2.49 0.24 1.15 0.04
110 9.90 6.50 6.74 2.55 4.53 0.97 2.74 0.29 1.27 0.04
120 10.80 7.63 7.35 2.99 4.95 1.14 2.99 0.34 1.38 0.05
130 11.70 8.85 7.96 3.47 5.36 1.32 3.24 0.39 1.50 0.06
140 12.60 10.16 8.57 3.98 5.77 1.52 3.49 0.45 1.61 0.07
150 13.50 11.54 9.19 4.52 6.18 1.73 3.74 0.51 1.73 0.08
160 14.40 13.01 9.80 5.10 6.60 1.95 3.99 0.57 1.84 0.09
170 10.41 5.70 7.01 2.18 4.24 0.64 1.96 0.10
180 11.02 6.34 7.42 2.42 4.49 0.71 2.07 0.11
190 11.64 7.01 7.83 2.67 4.74 0.79 2.19 0.12
200 12.25 7.71 8.24 2.94 4.98 0.86 2.30 0.13
220 13.47 9.19 9.07 3.51 5.48 1.03 2.53 0.16
240 Shaded area represents velocities over 5 fps. 14.70 10.80 9.89 4.12 5.98 1.21 2.76 0.18
260 10.72 4.78 6.48 1.41 2.99 0.21
Use with caution.
280 11.54 5.48 6.98 1.61 3.22 0.25
300 12.37 6.23 7.48 1.83 3.45 0.28
320 13.19 7.02 7.98 2.06 3.68 0.31
340 14.02 7.86 8.47 2.31 3.91 0.35
360 14.84 8.73 8.97 2.57 4.14 0.39
380 9.47 2.84 4.37 0.43
400 9.97 3.12 4.60 0.48
420 10.47 3.42 4.83 0.52
440 10.97 3.72 5.06 0.57
460 11.46 4.04 5.29 0.62
480 11.96 4.37 5.52 0.67
500 12.46 4.72 5.75 0.72
148
PVC Class 200 IPS Plastic Pipe
S i ze : 6 ” t h r u 18” Flo w: 20 th ru 4700GPM
A N SI/A SAE S3 7 6 .2 AST M 2 2 4 1 SDR21 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
Size 6” 8” 10” 12” 14” 16” 18”
Avg.ID 5.955 7.755 9.666 11.464 12.588 14.384 15.246

Pipe OD 6.625 8.625 10.750 12.750 14.000 16.000 18.000
Avg Wall 0.335 0.435 0.542 0.643 0.706 0.808 1.377
Min Wall 0.316 0.410 0.511 0.606 0.666 0.762 0.857
Flow Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI
GPM FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss
20 0.23 0.00 0.14 0.00 0.09 0.00 0.06 0.00 0.05 0.00 0.04 0.00 0.04 0.00
40 0.46 0.01 0.27 0.00 0.17 0.00 0.12 0.00 0.10 0.00 0.08 0.00 0.07 0.00
60 0.69 0.01 0.41 0.00 0.26 0.00 0.19 0.00 0.15 0.00 0.12 0.00 0.11 0.00
80 0.92 0.02 0.54 0.01 0.35 0.00 0.25 0.00 0.21 0.00 0.16 0.00 0.14 0.00
100 1.15 0.04 0.68 0.01 0.44 0.00 0.31 0.00 0.26 0.00 0.20 0.00 0.18 0.00
150 1.73 0.08 1.02 0.02 0.66 0.01 0.47 0.00 0.39 0.00 0.30 0.00 0.26 0.00
200 2.30 0.13 1.36 0.04 0.87 0.01 0.62 0.01 0.51 0.00 0.39 0.00 0.35 0.00
250 2.88 0.20 1.70 0.06 1.09 0.02 0.78 0.01 0.64 0.01 0.49 0.00 0.44 0.00
300 3.45 0.28 2.04 0.08 1.31 0.03 0.93 0.01 0.77 0.01 0.59 0.00 0.53 0.00
350 4.03 0.37 2.37 0.10 1.53 0.04 1.09 0.02 0.90 0.01 0.69 0.01 0.61 0.00
400 4.60 0.48 2.71 0.13 1.75 0.05 1.24 0.02 1.03 0.01 0.79 0.01 0.70 0.00
450 5.18 0.59 3.05 0.16 1.97 0.06 1.40 0.02 1.16 0.02 0.89 0.01 0.79 0.01
500 5.75 0.72 3.39 0.20 2.18 0.07 1.55 0.03 1.29 0.02 0.99 0.01 0.88 0.01
550 6.33 0.86 3.73 0.24 2.40 0.08 1.71 0.04 1.42 0.02 1.08 0.01 0.97 0.01
600 6.90 1.01 4.07 0.28 2.62 0.10 1.86 0.04 1.54 0.03 1.18 0.01 1.05 0.01
650 7.48 1.17 4.41 0.32 2.84 0.11 2.02 0.05 1.67 0.03 1.28 0.02 1.14 0.01
700 8.05 1.34 4.75 0.37 3.06 0.13 2.17 0.06 1.80 0.04 1.38 0.02 1.23 0.01
750 8.63 1.52 5.09 0.42 3.28 0.14 2.33 0.06 1.93 0.04 1.48 0.02 1.32 0.02
800 9.20 1.72 5.43 0.48 3.49 0.16 2.48 0.07 2.06 0.04 1.58 0.02 1.40 0.02
850 9.78 1.92 5.77 0.53 3.71 0.18 2.64 0.08 2.19 0.05 1.68 0.03 1.49 0.02
900 6.11 0.59 3.93 0.20 2.79 0.09 2.32 0.06 1.77 0.03 1.58 0.02
950 6.44 0.65 4.15 0.22 2.95 0.10 2.45 0.06 1.87 0.03 1.67 0.02
1000 6.78 0.72 4.37 0.25 3.10 0.11 2.57 0.07 1.97 0.04 1.76 0.03
1050 7.12 0.79 4.59 0.27 3.26 0.12 2.70 0.07 2.07 0.04 1.84 0.03
1100 7.46 0.86 4.80 0.29 3.41 0.13 2.83 0.08 2.17 0.04 1.93 0.03
1150 5.02 0.32 3.57 0.14 2.96 0.09 2.27 0.05 2.02 0.03
1200 5.24 0.34 3.73 0.15 3.09 0.10 2.37 0.05 2.11 0.04
1250 5.46 0.37 3.88 0.16 3.22 0.10 2.46 0.05 2.19 0.04
1300 5.68 0.40 4.04 0.17 3.35 0.11 2.56 0.06 2.28 0.04
1350 5.90 0.43 4.19 0.19 3.48 0.12 2.66 0.06 2.37 0.05
1400 6.11 0.46 4.35 0.20 3.60 0.13 2.76 0.07 2.46 0.05
1450 6.33 0.49 4.50 0.21 3.73 0.14 2.86 0.07 2.55 0.05
1500 6.55 0.52 4.66 0.23 3.86 0.14 2.96 0.08 2.63 0.06
1600 6.99 0.59 4.97 0.26 4.12 0.16 3.16 0.08 2.81 0.06
1700 7.42 0.66 5.28 0.29 4.38 0.18 3.35 0.09 2.98 0.07
1800 5.59 0.32 4.63 0.20 3.55 0.11 3.16 0.08
1900 5.90 0.35 4.89 0.22 3.75 0.12 3.34 0.09
2000 6.21 0.39 5.15 0.25 3.94 0.13 3.51 0.10
2100 6.52 0.42 5.41 0.27 4.14 0.14 3.69 0.11
2200 6.83 0.46 5.66 0.29 4.34 0.15 3.86 0.12
2300 7.14 0.50 5.92 0.32 4.54 0.17 4.04 0.13
2400 7.45 0.54 6.18 0.34 4.73 0.18 4.21 0.14
2500 7.76 0.59 6.44 0.37 4.93 0.19 4.39 0.15
2600 8.07 0.63 6.69 0.40 5.13 0.21 4.56 0.16
2700 8.38 0.67 6.95 0.43 5.32 0.22 4.74 0.17
2800 8.69 0.72 7.21 0.46 5.52 0.24 4.91 0.18
2900 9.00 0.77 7.47 0.49 5.72 0.26 5.09 0.19
3000 9.31 0.82 7.72 0.52 5.92 0.27 5.27 0.20
3100 9.62 0.87 7.98 0.55 6.11 0.29 5.44 0.22
3200 9.93 0.92 8.24 0.59 6.31 0.31 5.62 0.23
3300 8.50 0.62 6.51 0.32 5.79 0.24
3400 8.75 0.66 6.70 0.34 5.97 0.26
3500 9.01 0.69 6.90 0.36 6.14 0.27
3600 9.27 0.73 7.10 0.38 6.32 0.29
3700 9.53 0.77 7.30 0.40 6.49 0.30
3800 7.49 0.42 6.67 0.32
4000 7.89 0.46 7.02 0.35
4100 Use with caution. 8.09 0.48 7.20 0.37
4200 8.28 0.51 7.37 0.38
4300 7.55 0.40
4400 7.72 0.42
4500 7.90 0.43
4600 8.07 0.45
4700 8.25 0.47
149
PVC CLASS 315 IPS PLASTIC PIPE
ASTM D-2239 (1120, 1220) SDR 13.5 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4” 6”
Avg.ID 0.696 0.874 1.101 1.394 1.598 1.983 2.423 2.948 3.794 5.583
Pipe OD 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625
Avg Wall 0.072 0.088 0.107 0.133 0.151 0.196 0.226 0.274 0.353 0.521
Min Wall 0.062 0.078 0.097 0.123 0.141 0.176 0.213 0.259 0.333 0.491
1 0.84 0.25 0.53 0.08 0.34 0.03 0.21 0.01 0.16 0.00
2 1.68 0.90 1.07 0.30 0.67 0.10 0.42 0.03 0.32 0.02 0.21 0.01
3 2.53 1.90 1.60 0.63 1.01 0.20 0.63 0.06 0.48 0.03 0.31 0.01
4 3.37 3.24 2.14 1.07 1.35 0.35 0.84 0.11 0.64 0.06 0.42 0.02 0.28 0.01
5 4.21 4.89 2.67 1.61 1.68 0.53 1.05 0.17 0.80 0.09 0.52 0.03 0.35 0.01
6 5.05 6.86 3.20 2.26 2.02 0.74 1.26 0.23 0.96 0.12 0.62 0.04 0.42 0.02 0.28 0.01
7 5.90 9.12 3.74 3.01 2.36 0.98 1.47 0.31 1.12 0.16 0.73 0.06 0.49 0.02 0.33 0.01
8 6.74 11.68 4.27 3.86 2.69 1.25 1.68 0.40 1.28 0.20 0.83 0.07 0.56 0.03 0.38 0.01
9 7.58 14.53 4.81 4.80 3.03 1.56 1.89 0.49 1.44 0.25 0.93 0.09 0.63 0.03 0.42 0.01
10 8.42 17.66 5.34 5.83 3.37 1.90 2.10 0.60 1.60 0.31 1.04 0.11 0.69 0.04 0.47 0.02
12 10.11 24.75 6.41 8.17 4.04 2.66 2.52 0.84 1.92 0.43 1.25 0.15 0.83 0.06 0.56 0.02
14 11.79 32.93 7.48 10.87 4.71 3.53 2.94 1.12 2.24 0.58 1.45 0.20 0.97 0.08 0.66 0.03
16 13.48 42.16 8.55 13.92 5.39 4.53 3.36 1.44 2.56 0.74 1.66 0.26 1.11 0.10 0.75 0.04 0.45 0.01
18 15.16 52.44 9.61 17.32 6.06 5.63 3.78 1.79 2.88 0.92 1.87 0.32 1.25 0.12 0.85 0.05 0.51 0.01
20 10.68 21.05 6.73 6.84 4.20 2.17 3.20 1.12 2.08 0.39 1.39 0.15 0.94 0.06 0.57 0.02
22 11.75 25.11 7.40 8.16 4.62 2.59 3.52 1.33 2.28 0.47 1.53 0.18 1.03 0.07 0.62 0.02
24 12.82 29.50 8.08 9.59 5.04 3.04 3.83 1.57 2.49 0.55 1.67 0.21 1.13 0.08 0.68 0.02
26 13.89 34.21 8.75 11.12 5.46 3.53 4.15 1.82 2.70 0.64 1.81 0.24 1.22 0.09 0.74 0.03
28 14.96 39.25 9.42 12.76 5.88 4.05 4.47 2.08 2.91 0.73 1.95 0.27 1.31 0.11 0.79 0.03
30 16.02 44.60 10.10 14.50 6.30 4.60 4.79 2.37 3.11 0.83 2.08 0.31 1.41 0.12 0.85 0.04
32 10.77 16.34 6.72 5.18 5.11 2.67 3.32 0.93 2.22 0.35 1.50 0.14 0.91 0.04 0.42 0.01
34 11.44 18.28 7.14 5.80 5.43 2.98 3.53 1.04 2.36 0.39 1.60 0.15 0.96 0.04 0.45 0.01
36 12.12 20.32 7.56 6.45 5.75 3.32 3.74 1.16 2.50 0.44 1.69 0.17 1.02 0.05 0.47 0.01
38 12.79 22.46 7.98 7.13 6.07 3.67 3.94 1.28 2.64 0.48 1.78 0.19 1.08 0.05 0.50 0.01
40 13.46 24.70 8.40 7.84 6.39 4.03 4.15 1.41 2.78 0.53 1.88 0.20 1.13 0.06 0.52 0.01
42 14.14 27.04 8.82 8.58 6.71 4.41 4.36 1.54 2.92 0.58 1.97 0.22 1.19 0.07 0.55 0.01
44 14.81 29.47 9.24 9.35 7.03 4.81 4.57 1.68 3.06 0.63 2.07 0.24 1.25 0.07 0.58 0.01
46 15.48 32.00 9.66 10.15 7.35 5.22 4.77 1.83 3.20 0.69 2.16 0.27 1.30 0.08 0.60 0.01
48 16.16 34.62 10.08 10.98 7.67 5.65 4.98 1.98 3.34 0.75 2.25 0.29 1.36 0.08 0.63 0.01
50 16.83 37.34 10.50 11.85 7.99 6.09 5.19 2.13 3.47 0.80 2.35 0.31 1.42 0.09 0.65 0.01
55 11.55 14.13 8.79 7.27 5.71 2.54 3.82 0.96 2.58 0.37 1.56 0.11 0.72 0.02
60 12.60 16.60 9.59 8.54 6.23 2.99 4.17 1.13 2.82 0.43 1.70 0.13 0.79 0.02
65 13.65 19.26 10.39 9.91 6.74 3.47 4.52 1.31 3.05 0.50 1.84 0.15 0.85 0.02
70 14.70 22.09 11.18 11.37 7.26 3.98 4.86 1.50 3.29 0.58 1.98 0.17 0.92 0.03
75 15.75 25.10 11.98 12.91 7.78 4.52 5.21 1.70 3.52 0.66 2.13 0.19 0.98 0.03
80 16.80 28.29 12.78 14.55 8.30 5.09 5.56 1.92 3.76 0.74 2.27 0.22 1.05 0.03
85 13.58 16.28 8.82 5.70 5.91 2.15 3.99 0.83 2.41 0.24 1.11 0.04
90 14.38 18.10 9.34 6.33 6.25 2.39 4.23 0.92 2.55 0.27 1.18 0.04
95 15.18 20.01 9.86 7.00 6.60 2.64 4.46 1.02 2.69 0.30 1.24 0.05
100 15.98 22.00 10.38 7.70 6.95 2.90 4.69 1.12 2.83 0.33 1.31 0.05
110 11.41 9.18 7.64 3.46 5.16 1.33 3.12 0.39 1.44 0.06
120 12.45 10.79 8.34 4.07 5.63 1.57 3.40 0.46 1.57 0.07
130 13.49 12.51 9.03 4.72 6.10 1.82 3.68 0.53 1.70 0.08
140 14.53 14.35 9.73 5.41 6.57 2.08 3.97 0.61 1.83 0.09
150 15.56 16.31 10.42 6.15 7.04 2.37 4.25 0.69 1.96 0.11
160 16.60 18.38 11.12 6.93 7.51 2.67 4.54 0.78 2.09 0.12
170 11.81 7.76 7.98 2.99 4.82 0.87 2.23 0.13
180 12.51 8.62 8.45 3.32 5.10 0.97 2.36 0.15
190 13.20 9.53 8.92 3.67 5.39 1.08 2.49 0.16
200 13.90 10.48 9.39 4.03 5.67 1.18 2.62 0.18
220 15.29 12.50 10.33 4.81 6.24 1.41 2.88 0.22
260 12.21 6.56 7.37 1.92 3.40 0.29
280 Use with caution. 13.15 7.52 7.94 2.20 3.67 0.34
300 14.08 8.55 8.50 2.50 3.93 0.38
320 15.02 9.64 9.07 2.82 4.19 0.43
340 15.96 10.78 9.64 3.16 4.45 0.48
360 16.90 11.98 10.20 3.51 4.71 0.54
380 10.77 3.88 4.97 0.59
400 11.34 4.27 5.24 0.65
420 11.90 4.67 5.50 0.71
440 12.47 5.09 5.76 0.78
460 13.04 5.53 6.02 0.84
480 13.61 5.98 6.28 0.91
500 14.17 6.45 6.54 0.98
150
SCHEDULE 40 PVC IPS PLASTIC PIPE
ASTM D-1785 (1120, 1220) C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4” 6”
Avg ID 0.602 0.804 1.029 1.360 1.590 2.047 2.445 3.042 3.998 6.031
Pipe OD 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625
Avg Wall 0.119 0.123 0.143 0.150 0.155 0.164 0.215 0.229 0.251 0.297
Min Wall 0.109 0.113 0.133 0.140 0.145 0.154 0.203 0.216 0.237 0.280
1 1.13 0.50 0.63 0.12 0.39 0.04 0.22 0.01 0.16 0.00
2 2.25 1.82 1.26 0.44 0.77 0.13 0.44 0.03 0.32 0.02 0.19 0.00
3 3.38 3.85 1.89 0.94 1.16 0.28 0.66 0.07 0.48 0.03 0.29 0.01
4 4.50 6.55 2.52 1.60 1.54 0.48 0.88 0.12 0.65 0.06 0.39 0.02 0.27 0.01
5 5.63 9.91 3.16 2.42 1.93 0.73 1.10 0.19 0.81 0.09 0.49 0.03 0.34 0.01
6 6.75 13.89 3.79 3.40 2.31 1.02 1.32 0.26 0.97 0.12 0.58 0.04 0.41 0.02 0.26 0.01
7 7.88 18.48 4.42 4.52 2.70 1.36 1.54 0.35 1.13 0.16 0.68 0.05 0.48 0.02 0.31 0.01
8 9.01 23.66 5.05 5.79 3.08 1.74 1.76 0.45 1.29 0.21 0.78 0.06 0.55 0.03 0.35 0.01
9 10.13 29.43 5.68 7.20 3.47 2.17 1.99 0.56 1.45 0.26 0.88 0.08 0.61 0.03 0.40 0.01
10 11.26 35.77 6.31 8.75 3.85 2.63 2.21 0.68 1.61 0.32 0.97 0.09 0.68 0.04 0.44 0.01
12 13.51 50.14 7.57 12.27 4.62 3.69 2.65 0.95 1.94 0.44 1.17 0.13 0.82 0.05 0.53 0.02
14 15.76 66.71 8.84 16.32 5.39 4.91 3.09 1.26 2.26 0.59 1.36 0.17 0.96 0.07 0.62 0.03
16 18.01 85.42 10.10 20.90 6.17 6.29 3.53 1.62 2.58 0.76 1.56 0.22 1.09 0.09 0.71 0.03 0.41 0.01
18 20.26 106.3 11.36 25.99 6.94 7.82 3.97 2.01 2.90 0.94 1.75 0.28 1.23 0.12 0.79 0.04 0.46 0 .01
20 12.62 31.59 7.71 9.51 4.41 2.45 3.23 1.14 1.95 0.33 1.36 0.14 0.88 0.05 0.51 0.01
22 13.89 37.69 8.48 11.35 4.85 2.92 3.55 1.37 2.14 0.40 1.50 0.17 0.97 0.06 0.56 0.02
24 15.15 44.28 9.25 13.33 5.29 3.43 3.87 1.60 2.34 0.47 1.64 0.20 1.06 0.07 0.61 0.02
26 16.41 51.36 10.02 15.46 5.74 3.98 4.20 1.86 2.53 0.54 1.77 0.23 1.15 0.08 0.66 0.02
28 17.67 58.91 10.79 17.73 6.18 4.56 4.52 2.13 2.73 0.62 1.91 0.26 1.23 0.09 0.71 0.02
30 18.94 66.94 11.56 20.15 6.62 5.19 4.84 2.42 2.92 0.71 2.05 0.30 1.32 0.10 0.77 0.03
32 12.33 22.71 7.06 5.85 5.16 2.73 3.12 0.80 2.18 0.34 1.41 0.12 0.82 0.03 0.36 0.00
34 13.10 25.41 7.50 6.54 5.49 3.06 3.31 0.89 2.32 0.38 1.50 0.13 0.87 0.03 0.38 0.00
36 13.87 28.24 7.94 7.27 5.81 3.40 3.51 0.99 2.46 0.42 1.59 0.14 0.92 0.04 0.40 0.01
38 14.64 31.22 8.38 8.04 6.13 3.76 3.70 1.10 2.59 0.46 1.68 0.16 0.97 0.04 0.43 0.01
40 15.41 34.33 8.82 8.84 6.46 4.13 3.89 1.21 2.73 0.51 1.76 0.18 1.02 0.05 0.45 0.01
42 16.18 37.58 9.26 9.67 6.78 4.52 4.09 1.32 2.87 0.56 1.85 0.19 1.07 0.05 0.47 0.01
44 16.95 40.96 9.71 10.54 7.10 4.93 4.28 1.44 3.00 0.61 1.94 0.21 1.12 0.06 0.49 0.01
46 17.73 44.47 10.15 11.45 7.42 5.35 4.48 1.57 3.14 0.66 2.03 0.23 1.17 0.06 0.52 0.01
48 18.50 48.12 10.59 12.39 7.75 5.79 4.67 1.69 3.28 0.71 2.12 0.25 1.23 0.07 0.54 0.01
50 19.27 51.90 11.03 13.36 8.07 6.25 4.87 1.83 3.41 0.77 2.20 0.27 1.28 0.07 0.56 0.01
55 12.13 15.94 8.88 7.45 5.36 2.18 3.75 0.92 2.42 0.32 1.40 0.08 0.62 0.01
60 13.24 18.72 9.68 8.75 5.84 2.56 4.09 1.08 2.65 0.37 1.53 0.10 0.67 0.01
65 14.34 21.72 10.49 10.15 6.33 2.97 4.44 1.25 2.87 0.43 1.66 0.11 0.73 0.02
70 15.44 24.91 11.30 11.65 6.82 3.41 4.78 1.43 3.09 0.50 1.79 0.13 0.79 0.02
75 16.54 28.31 12.10 13.23 7.30 3.87 5.12 1.63 3.31 0.56 1.91 0.15 0.84 0.02
80 17.65 31.90 12.91 14.91 7.79 4.36 5.46 1.84 3.53 0.63 2.04 0.17 0.90 0.02
85 13.72 16.69 8.28 4.88 5.80 2.06 3.75 0.71 2.17 0.19 0.95 0.03
90 14.52 18.55 8.76 5.43 6.14 2.29 3.97 0.79 2.30 0.21 1.01 0.03
95 15.33 20.50 9.25 6.00 6.48 2.53 4.19 0.87 2.42 0.23 1.07 0.03
100 16.14 22.55 9.74 6.59 6.82 2.78 4.41 0.96 2.55 0.25 1.12 0.03
110 10.71 7.87 7.51 3.31 4.85 1.14 2.81 0.30 1.23 0.04
120 11.68 9.24 8.19 3.89 5.29 1.34 3.06 0.36 1.35 0.05
130 12.66 10.72 8.87 4.52 5.73 1.56 3.32 0.41 1.46 0.06
140 13.63 12.30 9.55 5.18 6.17 1.79 3.57 0.47 1.57 0.06
150 14.61 13.97 10.24 5.89 6.61 2.03 3.83 0.54 1.68 0.07
160 15.58 15.75 10.92 6.63 7.05 2.29 4.08 0.61 1.79 0.08
170 11.60 7.42 7.50 2.56 4.34 0.68 1.91 0.09
180 12.28 8.25 7.94 2.85 4.59 0.75 2.02 0.10
190 12.97 9.12 8.38 3.15 4.85 0.83 2.13 0.11
200 13.65 10.03 8.82 3.46 5.11 0.92 2.24 0.12
220 15.01 11.96 9.70 4.13 5.62 1.09 2.47 0.15
260 11.46 5.63 6.64 1.49 2.92 0.20
280 Use with caution. 12.35 6.46 7.15 1.71 3.14 0.23
300 13.23 7.34 7.66 1.94 3.37 0.26
320 14.11 8.27 8.17 2.19 3.59 0.30
340 14.99 9.25 8.68 2.45 3.81 0.33
360 15.87 10.29 9.19 2.72 4.04 0.37
380 9.70 3.01 4.26 0.41
400 10.21 3.31 4.49 0.45
420 10.72 3.62 4.71 0.49
440 11.23 3.95 4.94 0.53
460 11.74 4.28 5.16 0.58
480 12.25 4.64 5.38 0.63
500 12.76 5.00 5.61 0.68
151
PVC schedule 40 ips plastic pipe
Size: 4” thru 12” Flow: 10 thru 3000GPM
ASTM D1785 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size 4” 6” 8” 10” 12”
Avg.ID 3.998 6.031 7.942 9.976 11.889
Pipe OD 4.500 6.625 8.625 10.750 12.750
Avg Wall 0.251 0.297 0.342 0.387 0.431
Min Wall 0.237 0.280 0.322 0.365 0.406
Flow Velocity PSI Velocity PSI Velocity PSI Velocity PSI Velocity PSI
GPM FPS Loss FPS Loss FPS Loss FPS Loss FPS Loss
10 0.26 0.00 0.11 0.00 0.06 0.00 0.04 0.00 0.03 0.00
20 0.51 0.01 0.22 0.00 0.13 0.00 0.08 0.00 0.06 0.00
30 0.77 0.03 0.34 0.00 0.19 0.00 0.12 0.00 0.09 0.00
40 1.02 0.05 0.45 0.01 0.26 0.00 0.16 0.00 0.12 0.00
50 1.28 0.07 0.56 0.01 0.32 0.00 0.20 0.00 0.14 0.00
60 1.53 0.10 0.67 0.01 0.39 0.00 0.25 0.00 0.17 0.00
70 1.79 0.13 0.79 0.02 0.45 0.00 0.29 0.00 0.20 0.00
80 2.04 0.17 0.90 0.02 0.52 0.01 0.33 0.00 0.23 0.00
90 2.30 0.21 1.01 0.03 0.58 0.01 0.37 0.00 0.26 0.00
100 2.55 0.25 1.12 0.03 0.65 0.01 0.41 0.00 0.29 0.00
120 3.06 0.36 1.35 0.05 0.78 0.01 0.49 0.00 0.35 0.00
140 3.57 0.47 1.57 0.06 0.91 0.02 0.57 0.01 0.40 0.00
160 4.08 0.61 1.79 0.08 1.03 0.02 0.66 0.01 0.46 0.00
180 4.59 0.75 2.02 0.10 1.16 0.03 0.74 0.01 0.52 0.00
200 5.11 0.92 2.24 0.12 1.29 0.03 0.82 0.01 0.58 0.00
225 5.74 1.14 2.52 0.15 1.46 0.04 0.92 0.01 0.65 0.01
250 6.38 1.39 2.80 0.19 1.62 0.05 1.02 0.02 0.72 0.01
275 7.02 1.65 3.08 0.22 1.78 0.06 1.13 0.02 0.79 0.01
300 7.66 1.94 3.37 0.26 1.94 0.07 1.23 0.02 0.87 0.01
325 8.30 2.25 3.65 0.30 2.10 0.08 1.33 0.03 0.94 0.01
350 8.93 2.58 3.93 0.35 2.26 0.09 1.43 0.03 1.01 0.01
375 4.21 0.40 2.43 0.10 1.54 0.03 1.08 0.01
400 4.49 0.45 2.59 0.12 1.64 0.04 1.15 0.02
425 4.77 0.50 2.75 0.13 1.74 0.04 1.23 0.02
450 5.05 0.56 2.91 0.15 1.84 0.05 1.30 0.02
475 5.33 0.62 3.07 0.16 1.95 0.05 1.37 0.02
500 5.61 0.68 3.23 0.18 2.05 0.06 1.44 0.02
550 6.17 0.81 3.56 0.21 2.25 0.07 1.59 0.03
600 6.73 0.95 3.88 0.25 2.46 0.08 1.73 0.03
650 7.29 1.10 4.20 0.29 2.66 0.09 1.88 0.04
700 7.85 1.26 4.53 0.33 2.87 0.11 2.02 0.05
750 4.85 0.38 3.07 0.12 2.16 0.05
800 5.17 0.42 3.28 0.14 2.31 0.06
850 5.50 0.47 3.48 0.16 2.45 0.07
900 5.82 0.53 3.69 0.17 2.60 0.07
950 6.15 0.58 3.89 0.19 2.74 0.08
1000 6.47 0.64 4.10 0.21 2.89 0.09
1050 6.79 0.70 4.30 0.23 3.03 0.10
1150 7.44 0.83 4.71 0.27 3.32 0.12
1200 7.76 0.90 4.92 0.30 3.46 0.13
1250 5.12 0.32 3.61 0.14
1300 5.33 0.34 3.75 0.15
1350 5.53 0.37 3.90 0.16
1400 5.74 0.39 4.04 0.17
1500 6.15 0.45 4.33 0.19
1550 6.35 0.47 4.47 0.20
1600 6.56 0.50 4.62 0.21
1650 6.76 0.53 4.76 0.23
1700 6.97 0.56 4.91 0.24
1750 7.17 0.59 5.05 0.25
1800 5.20 0.27
1850 5.34 0.28
1900 5.48 0.29
1950 5.63 0.31
2000 5.77 0.32
2100 6.06 0.35
2200 Shaded area represents velocities over 5 fps. 6.35 0.39
2300 6.64 0.42
2400 Use with caution. 6.93 0.45
2500 7.22 0.49
2600
2700
2800
2900
3000
152
SCHEDULE 80 PVC IPS PLASTIC PIPE

ASTM D-1785 (1120, 1220) C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4” 6”
Avg ID 0.526 0.722 0.935 1.254 1.476 1.913 2.289 2.864 3.786 5.709
Pipe OD 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625
Avg Wall 0.157 0.164 0.190 0.203 0.212 0.231 0.293 0.318 0.357 0.458
Min Wall 0.147 0.154 0.179 0.191 0.200 0.218 0.276 0.300 0.337 0.432
1 1.47 0.97 0.78 0.21 0.47 0.06 0.26 0.01 0.19 0.01
2 2.95 3.50 1.57 0.75 0.93 0.21 0.52 0.05 0.37 0.02 0.22 0.01
3 4.42 7.42 2.35 1.59 1.40 0.45 0.78 0.11 0.56 0.05 0.33 0.01
4 5.90 12.64 3.13 2.71 1.87 0.77 1.04 0.18 0.75 0.08 0.45 0.02 0.31 0.01
5 7.37 19.11 3.91 4.09 2.33 1.16 1.30 0.28 0.94 0.13 0.56 0.04 0.39 0.01
6 8.85 26.78 4.70 5.74 2.80 1.63 1.56 0.39 1.12 0.18 0.67 0.05 0.47 0.02 0.30 0.01
7 10.32 35.63 5.48 7.63 3.27 2.17 1.82 0.52 1.31 0.24 0.78 0.07 0.55 0.03 0.35 0.01
8 11.80 45.63 6.26 9.77 3.73 2.78 2.08 0.67 1.50 0.30 0.89 0.09 0.62 0.04 0.40 0.01
9 13.27 56.75 7.04 12.15 4.20 3.45 2.34 0.83 1.69 0.37 1.00 0.11 0.70 0.04 0.45 0.01
10 14.75 68.98 7.83 14.77 4.67 4.20 2.59 1.01 1.87 0.46 1.11 0.13 0.78 0.05 0.50 0.02
12 9.39 20.70 5.60 5.88 3.11 1.41 2.25 0.64 1.34 0.18 0.93 0.08 0.60 0.03
14 10.96 27.55 6.53 7.83 3.63 1.88 2.62 0.85 1.56 0.24 1.09 0.10 0.70 0.03
16 12.52 35.27 7.47 10.03 4.15 2.40 3.00 1.09 1.78 0.31 1.25 0.13 0.80 0.04 0.46 0.01
18 14.09 43.87 8.40 12.47 4.67 2.99 3.37 1.35 2.01 0.38 1.40 0.16 0.90 0.05 0.51 0.01
20 15.65 53.32 9.33 15.16 5.19 3.63 3.75 1.64 2.23 0.47 1.56 0.19 0.99 0.07 0.57 0.02
22 10.27 18.08 5.71 4.33 4.12 1.96 2.45 0.56 1.71 0.23 1.09 0.08 0.63 0.02
24 11.20 21.24 6.23 5.09 4.49 2.30 2.68 0.65 1.87 0.27 1.19 0.09 0.68 0.02
26 12.13 24.64 6.75 5.91 4.87 2.67 2.90 0.76 2.02 0.32 1.29 0.11 0.74 0.03
28 13.07 28.26 7.26 6.77 5.24 3.06 3.12 0.87 2.18 0.36 1.39 0.12 0.80 0.03
30 14.00 32.12 7.78 7.70 5.62 3.48 3.34 0.99 2.34 0.41 1.49 0.14 0.85 0.04
32 14.93 36.19 8.30 8.68 5.99 3.92 3.57 1.11 2.49 0.46 1.59 0.16 0.91 0.04 0.40 0.01
34 15.87 40.49 8.82 9.71 6.37 4.39 3.79 1.24 2.65 0.52 1.69 0.17 0.97 0.04 0.43 0.01
36 9.34 10.79 6.74 4.88 4.01 1.38 2.80 0.58 1.79 0.19 1.02 0.05 0.45 0.01
38 9.86 11.93 7.12 5.40 4.24 1.53 2.96 0.64 1.89 0.21 1.08 0.06 0.48 0.01
40 10.38 13.11 7.49 5.93 4.46 1.68 3.11 0.70 1.99 0.24 1.14 0.06 0.50 0.01
42 10.90 14.35 7.87 6.49 4.68 1.84 3.27 0.77 2.09 0.26 1.20 0.07 0.53 0.01
44 11.42 15.65 8.24 7.08 4.91 2.00 3.43 0.84 2.19 0.28 1.25 0.07 0.55 0.01
46 11.94 16.99 8.61 7.69 5.13 2.18 3.58 0.91 2.29 0.31 1.31 0.08 0.58 0.01
48 12.45 18.38 8.99 8.32 5.35 2.35 3.74 0.98 2.39 0.33 1.37 0.08 0.60 0.01
50 12.97 19.83 9.36 8.97 5.57 2.54 3.89 1.06 2.49 0.36 1.42 0.09 0.63 0.01
55 14.27 23.65 10.30 10.70 6.13 3.03 4.28 1.27 2.74 0.43 1.57 0.11 0.69 0.01
60 15.57 27.79 11.24 12.57 6.69 3.56 4.67 1.49 2.98 0.50 1.71 0.13 0.75 0.02
65 12.17 14.58 7.25 4.13 5.06 1.72 3.23 0.58 1.85 0.15 0.81 0.02
70 13.11 16.73 7.80 4.74 5.45 1.98 3.48 0.66 1.99 0.17 0.88 0.02
75 14.05 19.01 8.36 5.38 5.84 2.25 3.73 0.76 2.13 0.19 0.94 0.03
80 14.98 21.42 8.92 6.06 6.23 2.53 3.98 0.85 2.28 0.22 1.00 0.03
85 15.92 23.96 9.48 6.78 6.62 2.83 4.23 0.95 2.42 0.24 1.06 0.03
90 10.03 7.54 7.01 3.15 4.48 1.06 2.56 0.27 1.13 0.04
95 10.59 8.34 7.40 3.48 4.73 1.17 2.70 0.30 1.19 0.04
100 11.15 9.17 7.79 3.83 4.97 1.29 2.85 0.33 1.25 0.04
110 12.26 10.94 8.57 4.57 5.47 1.53 3.13 0.39 1.38 0.05
120 13.38 12.85 9.34 5.37 5.97 1.80 3.42 0.46 1.50 0.06
130 14.49 14.90 10.12 6.22 6.47 2.09 3.70 0.54 1.63 0.07
140 15.61 17.09 10.90 7.14 6.96 2.40 3.98 0.62 1.75 0.08
150 11.68 8.11 7.46 2.73 4.27 0.70 1.88 0.10
160 12.46 9.14 7.96 3.07 4.55 0.79 2.00 0.11
170 13.24 10.23 8.46 3.44 4.84 0.88 2.13 0.12
180 14.02 11.37 8.95 3.82 5.12 0.98 2.25 0.13
190 14.80 12.57 9.45 4.22 5.41 1.09 2.38 0.15
200 15.57 13.82 9.95 4.64 5.69 1.19 2.50 0.16
220 10.94 5.54 6.26 1.42 2.75 0.19
240 Shaded area represents velocities over 5 fps. 11.94 6.51 6.83 1.67 3.00 0.23
260 12.93 7.55 7.40 1.94 3.25 0.26
280 Use with caution. 13.93 8.66 7.97 2.23 3.51 0.30
300 14.92 9.84 8.54 2.53 3.76 0.34
320 15.92 11.09 9.11 2.85 4.01 0.39
340 9.68 3.19 4.26 0.43
360 10.25 3.55 4.51 0.48
380 10.82 3.92 4.76 0.53
400 11.39 4.31 5.01 0.58
420 11.95 4.72 5.26 0.64
440 12.52 5.14 5.51 0.70
460 13.09 5.59 5.76 0.76
480 13.66 6.04 6.01 0.82
500 14.23 6.52 6.26 0.88
153
PVC schedule 80 ips plastic pipe
ASTM D1785 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size 4” 6” 8” 10” 12”
Avg.ID 3.786 5.709 7.565 9.493 11.294
Pipe OD 4.500 6.625 8.625 10.750 12.750
Avg Wall 0.357 0.458 0.530 0.629 0.728
Min Wall 0.337 0.432 0.500 0.593 0.687
10 0.28 0.00 0.13 0.00 0.07 0.00 0.05 0.00 0.03 0.00
20 0.57 0.02 0.25 0.00 0.14 0.00 0.09 0.00 0.06 0.00
30 0.85 0.04 0.38 0.00 0.21 0.00 0.14 0.00 0.10 0.00
40 1.14 0.06 0.50 0.01 0.29 0.00 0.18 0.00 0.13 0.00
50 1.42 0.09 0.63 0.01 0.36 0.00 0.23 0.00 0.16 0.00
60 1.71 0.13 0.75 0.02 0.43 0.00 0.27 0.00 0.19 0.00
70 1.99 0.17 0.88 0.02 0.50 0.01 0.32 0.00 0.22 0.00
80 2.28 0.22 1.00 0.03 0.57 0.01 0.36 0.00 0.26 0.00
90 2.56 0.27 1.13 0.04 0.64 0.01 0.41 0.00 0.29 0.00
100 2.85 0.33 1.25 0.04 0.71 0.01 0.45 0.00 0.32 0.00
120 3.42 0.46 1.50 0.06 0.86 0.02 0.54 0.01 0.38 0.00
140 3.98 0.62 1.75 0.08 1.00 0.02 0.63 0.01 0.45 0.00
160 4.55 0.79 2.00 0.11 1.14 0.03 0.72 0.01 0.51 0.00
180 5.12 0.98 2.25 0.13 1.28 0.03 0.81 0.01 0.58 0.00
200 5.69 1.19 2.50 0.16 1.43 0.04 0.91 0.01 0.64 0.01
225 6.40 1.49 2.82 0.20 1.60 0.05 1.02 0.02 0.72 0.01
250 7.12 1.81 3.13 0.24 1.78 0.06 1.13 0.02 0.80 0.01
275 7.83 2.15 3.44 0.29 1.96 0.07 1.25 0.02 0.88 0.01
300 8.54 2.53 3.76 0.34 2.14 0.09 1.36 0.03 0.96 0.01
325 9.25 2.94 4.07 0.40 2.32 0.10 1.47 0.03 1.04 0.01
350 9.96 3.37 4.38 0.46 2.50 0.12 1.58 0.04 1.12 0.02
375 4.69 0.52 2.67 0.13 1.70 0.04 1.20 0.02
400 5.01 0.58 2.85 0.15 1.81 0.05 1.28 0.02
425 5.32 0.65 3.03 0.17 1.92 0.06 1.36 0.02
450 5.63 0.73 3.21 0.18 2.04 0.06 1.44 0.03
475 5.95 0.80 3.39 0.20 2.15 0.07 1.52 0.03
500 6.26 0.88 3.56 0.22 2.26 0.07 1.60 0.03
550 6.88 1.05 3.92 0.27 2.49 0.09 1.76 0.04
600 7.51 1.24 4.28 0.31 2.72 0.10 1.92 0.04
650 8.14 1.44 4.63 0.36 2.94 0.12 2.08 0.05
700 8.76 1.65 4.99 0.42 3.17 0.14 2.24 0.06
750 5.35 0.48 3.40 0.16 2.40 0.07
800 5.70 0.54 3.62 0.18 2.56 0.08
850 6.06 0.60 3.85 0.20 2.72 0.09
900 6.42 0.67 4.07 0.22 2.88 0.09
950 6.77 0.74 4.30 0.24 3.04 0.10
1000 7.13 0.81 4.53 0.27 3.20 0.12
1050 7.49 0.89 4.75 0.29 3.36 0.13
1150 8.20 1.05 5.21 0.35 3.68 0.15
1200 8.56 1.14 5.43 0.38 3.84 0.16
1250 5.66 0.41 4.00 0.17
1300 5.89 0.44 4.16 0.19
1350 6.11 0.47 4.32 0.20
1400 6.34 0.50 4.48 0.22
1500 6.79 0.57 4.80 0.24
1550 7.02 0.60 4.96 0.26
1600 7.24 0.64 5.12 0.28
1650 7.47 0.68 5.28 0.29
1700 7.70 0.72 5.44 0.31
1750 7.92 0.76 5.60 0.33
1800 5.76 0.34
1850 Shaded area represents velocities over 5 fps. 5.92 0.36
1900 6.08 0.38
1950 Use with caution. 6.24 0.40
2000 6.40 0.42
2100 6.72 0.46
2200 7.04 0.50
2300 7.36 0.54
2400 7.68 0.58
2500 8.00 0.63
2600
2700
2800
2900
3000
154
TYPE ‘K’ COPPER TUBING
Size: ½” thru 3” Flow: 1 thru 600 GPM
ASTM B 88 C=140 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size ½” 5/8” ¾” 1” 1¼” 1½” 2” 2½” 3”
Avg ID 0.527 0.652 0.745 0.995 1.245 1.481 1.959 2.435 2.907
Pipe OD 0.625 0.750 0.875 1.125 1.375 1.625 2.125 2.625 3.125
Avg Wall 0.049 0.049 0.065 0.065 0.065 0.072 0.083 0.095 0.109
1 1.47 1.09 0.96 0.39 0.74 0.20 0.41 0.05 0.26 0.02
2 2.94 3.94 1.92 1.40 1.47 0.73 0.82 0.18 0.53 0.06
3 4.41 8.35 2.88 2.97 2.21 1.55 1.24 0.38 0.79 0.13
4 5.88 14.23 3.84 5.05 2.94 2.64 1.65 0.65 1.05 0.22
5 7.35 21.51 4.80 7.64 3.68 3.99 2.06 0.98 1.32 0.33
6 8.81 30.15 5.76 10.70 4.41 5.59 2.47 1.37 1.58 0.46 1.12 0.20
7 10.28 40.12 6.72 14.24 5.15 7.44 2.88 1.82 1.84 0.61 1.30 0.26
8 11.75 51.37 7.68 18.24 5.88 9.53 3.30 2.33 2.11 0.78 1.49 0.34
9 13.22 63.90 8.64 22.68 6.62 11.85 3.71 2.90 2.37 0.97 1.67 0.42
10 14.69 77.66 9.60 27.57 7.35 14.41 4.12 3.52 2.63 1.18 1.86 0.51
12 11.52 38.64 8.82 20.20 4.95 4.94 3.16 1.66 2.23 0.71 1.28 0.18
14 13.44 51.41 10.29 26.87 5.77 6.57 3.69 2.21 2.60 0.95 1.49 0.24
16 15.36 65.83 11.76 34.41 6.59 8.42 4.21 2.83 2.98 1.22 1.70 0.31
18 17.28 81.88 13.23 42.80 7.42 10.47 4.74 3.52 3.35 1.51 1.91 0.39
20 14.70 52.02 8.24 12.72 5.26 4.28 3.72 1.84 2.13 0.47
22 16.17 62.06 9.07 15.18 5.79 5.10 4.09 2.19 2.34 0.56 1.51 0.19 1.06 0.08
24 17.64 72.91 9.89 17.84 6.32 5.99 4.46 2.58 2.55 0.66 1.65 0.23 1.16 0.10
26 10.71 20.69 6.84 6.95 4.84 2.99 2.76 0.77 1.79 0.27 1.26 0.11
28 11.54 23.73 7.37 7.97 5.21 3.43 2.98 0.88 1.93 0.30 1.35 0.13
30 12.36 26.96 7.90 9.06 5.58 3.89 3.19 1.00 2.06 0.35 1.45 0.15
32 13.19 30.39 8.42 10.21 5.95 4.39 3.40 1.12 2.20 0.39 1.54 0.16
34 14.01 34.00 8.95 11.42 6.32 4.91 3.61 1.26 2.34 0.44 1.64 0.18
36 14.84 37.79 9.48 12.70 6.70 5.46 3.83 1.40 2.48 0.49 1.74 0.20
38 15.66 41.77 10.00 14.04 7.07 6.03 4.04 1.55 2.61 0.54 1.83 0.23
40 16.48 45.94 10.53 15.43 7.44 6.63 4.25 1.70 2.75 0.59 1.93 0.25
42 17.31 50.28 11.06 16.89 7.81 7.26 4.47 1.86 2.89 0.65 2.03 0.27
44 11.58 18.41 8.18 7.91 4.68 2.03 3.03 0.70 2.12 0.30
46 12.11 19.99 8.56 8.59 4.89 2.20 3.17 0.76 2.22 0.32
48 12.63 21.63 8.93 9.30 5.10 2.38 3.30 0.83 2.32 0.35
50 13.16 23.33 9.30 10.03 5.32 2.57 3.44 0.89 2.41 0.38
55 14.48 27.84 10.23 11.96 5.85 3.07 3.78 1.06 2.66 0.45
60 15.79 32.70 11.16 14.05 6.38 3.60 4.13 1.25 2.90 0.53
65 17.11 37.93 12.09 16.30 6.91 4.18 4.47 1.45 3.14 0.61
70 18.43 43.51 13.02 18.70 7.44 4.79 4.82 1.66 3.38 0.70
75 13.95 21.24 7.97 5.45 5.16 1.89 3.62 0.80
80 14.88 23.94 8.51 6.14 5.50 2.13 3.86 0.90
85 15.81 26.79 9.04 6.87 5.85 2.38 4.10 1.01
90 16.74 29.78 9.57 7.63 6.19 2.65 4.35 1.12
95 17.67 32.91 10.10 8.44 6.54 2.93 4.59 1.24
100 18.60 36.19 10.63 9.28 6.88 3.22 4.83 1.36
110 11.69 11.07 7.57 3.84 5.31 1.62
120 Shaded area represents velocities over 7 fps. 12.76 13.01 8.26 4.51 5.79 1.91
130 Use with caution, where water hammer is a 13.82 15.08 8.95 5.23 6.28 2.21
140 concern. 14.88 17.30 9.63 6.00 6.76 2.54
150 15.95 19.66 10.32 6.82 7.24 2.88
160 17.01 22.16 11.01 7.69 7.72 3.25
170 18.07 24.79 11.70 8.60 8.21 3.63
180 12.39 9.56 8.69 4.04
190 13.07 10.57 9.17 4.46
200 13.76 11.62 9.66 4.91
220 15.14 13.87 10.62 5.86
240 16.51 16.29 11.59 6.88
260 17.89 18.90 12.55 7.98
280 19.27 21.68 13.52 9.15
300 14.48 10.40
320 15.45 11.72
340 16.42 13.11
360 17.38 14.58
380 18.35 16.11
400
420
440
460
480
500
155
type ‘L’ copper tubing
C=140 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size ½” 5/8” ¾” 1” 1” 1½” 2” 2½” 3”

Avg.ID 0.545 0.666 0.785 1.025 1.265 1.505 1.985 2.465 2.945
Pipe OD 0.625 0.750 0.875 1.125 1.375 1.625 2.125 2.625 3.125
Avg Wall 0.040 0.042 0.045 0.050 0.055 0.060 0.070 0.080 0.090
1 1.37 0.93 0.92 0.35 0.66 0.16 0.39 0.04 0.25 0.02
2 2.75 3.35 1.84 1.26 1.32 0.57 0.78 0.15 0.51 0.06
3 4.12 7.09 2.76 2.67 1.99 1.20 1.17 0.33 0.76 0.12
4 5.49 12.09 3.68 4.56 2.65 2.05 1.55 0.56 1.02 0.20
5 6.87 18.27 4.60 6.89 3.31 3.09 1.94 0.85 1.27 0.30
6 8.24 25.61 5.52 9.65 3.97 4.34 2.33 1.18 1.53 0.43 1.08 0.18
7 9.62 34.07 6.44 12.84 4.63 5.77 2.72 1.58 1.78 0.57 1.26 0.24
8 10.99 43.63 7.36 16.45 5.30 7.39 3.11 2.02 2.04 0.72 1.44 0.31
9 12.36 54.26 8.28 20.45 5.96 9.19 3.50 2.51 2.29 0.90 1.62 0.39
10 13.74 65.95 9.20 24.86 6.62 11.17 3.88 3.05 2.55 1.10 1.80 0.47
12 11.04 34.85 7.95 15.66 4.66 4.28 3.06 1.54 2.16 0.66 1.24 0.17
14 12.88 46.36 9.27 20.83 5.44 5.69 3.57 2.04 2.52 0.88 1.45 0.23
16 14.72 59.37 10.59 26.68 6.21 7.28 4.08 2.62 2.88 1.12 1.66 0.29
18 16.56 73.84 11.92 33.18 6.99 9.06 4.59 3.25 3.24 1.40 1.86 0.36
20 13.24 40.33 7.77 11.01 5.10 3.96 3.60 1.70 2.07 0.44
22 14.57 48.11 8.54 13.14 5.61 4.72 3.96 2.03 2.28 0.53 1.48 0.18 1.03 0.08
24 15.89 56.53 9.32 15.44 6.12 5.55 4.32 2.38 2.49 0.62 1.61 0.22 1.13 0.09
26 10.10 17.90 6.63 6.43 4.68 2.76 2.69 0.72 1.75 0.25 1.22 0.11
28 10.87 20.54 7.14 7.38 5.04 3.17 2.90 0.82 1.88 0.29 1.32 0.12
30 11.65 23.33 7.65 8.38 5.40 3.60 3.11 0.94 2.01 0.33 1.41 0.14
32 12.43 26.30 8.16 9.45 5.76 4.06 3.31 1.05 2.15 0.37 1.51 0.15
34 13.20 29.42 8.67 10.57 6.12 4.54 3.52 1.18 2.28 0.41 1.60 0.17
36 13.98 32.71 9.18 11.75 6.48 5.05 3.73 1.31 2.42 0.46 1.69 0.19
38 14.76 36.15 9.69 12.99 6.84 5.58 3.93 1.45 2.55 0.51 1.79 0.21
40 15.53 39.75 10.20 14.28 7.21 6.13 4.14 1.59 2.69 0.56 1.88 0.23
42 16.31 43.51 10.71 15.63 7.57 6.71 4.35 1.75 2.82 0.61 1.98 0.26
44 11.22 17.04 7.93 7.32 4.56 1.90 2.95 0.66 2.07 0.28
46 11.73 18.50 8.29 7.94 4.76 2.07 3.09 0.72 2.16 0.30
48 12.24 20.02 8.65 8.60 4.97 2.24 3.22 0.78 2.26 0.33
50 12.75 21.59 9.01 9.27 5.18 2.41 3.36 0.84 2.35 0.35
55 14.02 25.76 9.91 11.06 5.70 2.88 3.69 1.00 2.59 0.42
60 15.30 30.26 10.81 13.00 6.21 3.38 4.03 1.18 2.82 0.50
65 16.57 35.10 11.71 15.07 6.73 3.92 4.36 1.37 3.06 0.57
70 17.85 40.26 12.61 17.29 7.25 4.50 4.70 1.57 3.29 0.66
75 13.51 19.65 7.77 5.11 5.04 1.78 3.53 0.75
80 14.41 22.14 8.28 5.76 5.37 2.01 3.76 0.84
85 15.31 24.77 8.80 6.44 5.71 2.25 4.00 0.94
90 16.21 27.54 9.32 7.16 6.04 2.50 4.23 1.05
95 17.11 30.44 9.84 7.91 6.38 2.76 4.47 1.16
100 18.01 33.47 10.35 8.70 6.71 3.03 4.70 1.28
110 11.39 10.38 7.39 3.62 5.17 1.52
120 12.43 12.20 8.06 4.25 5.65 1.79
130 13.46 14.15 8.73 4.93 6.12 2.07
140 14.50 16.23 9.40 5.66 6.59 2.38
150 15.53 18.44 10.07 6.43 7.06 2.70
160 16.57 20.78 10.74 7.24 7.53 3.05
Shaded area represents velocities over 7 fps.
170 17.60 23.25 11.41 8.11 8.00 3.41
180 Use with caution, where water hammer 12.09 9.01 8.47 3.79
190 12.76 9.96 8.94 4.19
200 is a concern. 13.43 10.95 9.41 4.61
220 14.77 13.07 10.35 5.50
240 16.12 15.35 11.29 6.46
260 17.46 17.80 12.23 7.49
280 18.80 20.42 13.17 8.59
300 14.11 9.76
320 15.05 11.00
340 15.99 12.31
360 16.94 13.69
380 17.88 15.13
400
420
440
460
480
500
156
type ‘M’ copper tubing
C=140 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size ½” 5/8” ¾” 1” 1¼” 1½” 2” 2½” 3”
Avg.ID 0.569 0.690 0.811 1.055 1.291 1.527 2.009 2.495 2.981
Pipe OD 0.625 0.750 0.875 1.125 1.375 1.625 2.125 2.625 3.125
Avg Wall 0.028 0.030 0.032 0.035 0.042 0.049 0.058 0.065 0.072
1 1.26 0.75 0.86 0.29 0.62 0.13 0.37 0.04 0.24 0.01
2 2.52 2.71 1.71 1.06 1.24 0.48 0.73 0.13 0.49 0.05
3 3.78 5.75 2.57 2.25 1.86 1.03 1.10 0.29 0.73 0.11
4 5.04 9.80 3.43 3.83 2.48 1.75 1.47 0.49 0.98 0.18
5 6.30 14.81 4.28 5.80 3.10 2.64 1.83 0.73 1.22 0.27
6 7.56 20.76 5.14 8.13 3.72 3.70 2.20 1.03 1.47 0.39 1.05 0.17
7 8.82 27.62 6.00 10.81 4.34 4.92 2.57 1.37 1.71 0.51 1.22 0.23
8 10.08 35.37 6.86 13.84 4.96 6.31 2.93 1.75 1.96 0.66 1.40 0.29
9 11.34 44.00 7.71 17.22 5.58 7.84 3.30 2.18 2.20 0.82 1.57 0.36
10 12.60 53.48 8.57 20.93 6.20 9.53 3.67 2.65 2.45 0.99 1.75 0.44
12 10.28 29.33 7.44 13.36 4.40 3.72 2.94 1.39 2.10 0.61 1.21 0.16
14 12.00 39.02 8.68 17.78 5.13 4.94 3.43 1.85 2.45 0.82 1.42 0.22
16 13.71 49.97 9.93 22.77 5.87 6.33 3.92 2.37 2.80 1.05 1.62 0.28
18 15.43 62.15 11.17 28.32 6.60 7.87 4.41 2.95 3.15 1.30 1.82 0.34
20 17.14 75.55 12.41 34.42 7.33 9.57 4.90 3.58 3.50 1.58 2.02 0.42
22 13.65 41.06 8.06 11.42 5.39 4.28 3.85 1.89 2.22 0.50 1.44 0.17 1.01 0.07
24 14.89 48.24 8.80 13.41 5.88 5.02 4.20 2.22 2.43 0.58 1.57 0.20 1.10 0.09
26 9.53 15.56 6.36 5.83 4.55 2.57 2.63 0.68 1.70 0.24 1.19 0.10
28 10.26 17.85 6.85 6.68 4.90 2.95 2.83 0.78 1.84 0.27 1.29 0.11
30 11.00 20.28 7.34 7.59 5.25 3.35 3.03 0.88 1.97 0.31 1.38 0.13
32 11.73 22.85 7.83 8.56 5.60 3.78 3.23 0.99 2.10 0.35 1.47 0.15
34 12.46 25.57 8.32 9.57 5.95 4.23 3.44 1.11 2.23 0.39 1.56 0.16
36 13.20 28.42 8.81 10.64 6.30 4.70 3.64 1.24 2.36 0.43 1.65 0.18
38 13.93 31.42 9.30 11.76 6.65 5.20 3.84 1.37 2.49 0.48 1.74 0.20
40 14.66 34.55 9.79 12.94 7.00 5.71 4.04 1.50 2.62 0.52 1.84 0.22
42 15.40 37.81 10.28 14.16 7.35 6.26 4.25 1.65 2.75 0.57 1.93 0.24
44 10.77 15.43 7.70 6.82 4.45 1.79 2.88 0.63 2.02 0.26
46 11.26 16.76 8.05 7.40 4.65 1.95 3.01 0.68 2.11 0.29
48 11.75 18.13 8.40 8.01 4.85 2.11 3.15 0.73 2.20 0.31
50 12.24 19.56 8.75 8.64 5.05 2.27 3.28 0.79 2.30 0.33
55 13.46 23.33 9.62 10.31 5.56 2.71 3.60 0.95 2.53 0.40
60 14.69 27.41 10.50 12.11 6.07 3.19 3.93 1.11 2.75 0.47
65 15.91 31.79 11.37 14.04 6.57 3.70 4.26 1.29 2.98 0.54
70 17.14 36.47 12.25 16.11 7.08 4.24 4.59 1.48 3.21 0.62
75 13.12 18.31 7.58 4.82 4.92 1.68 3.44 0.71
80 14.00 20.63 8.09 5.43 5.24 1.89 3.67 0.80
85 14.87 23.08 8.59 6.07 5.57 2.12 3.90 0.89
90 15.75 25.66 9.10 6.75 5.90 2.35 4.13 0.99
95 16.62 28.36 9.60 7.46 6.23 2.60 4.36 1.09
100 17.50 31.19 10.11 8.21 6.55 2.86 4.59 1.20
110 11.12 9.79 7.21 3.41 5.05 1.44
120 12.13 11.51 7.87 4.01 5.51 1.69
130 13.14 13.34 8.52 4.65 5.97 1.96
140 14.15 15.31 9.18 5.33 6.43 2.24
150 15.16 17.39 9.83 6.06 6.89 2.55
160 16.17 19.60 10.49 6.83 7.35 2.87
170 17.18 21.93 11.14 7.64 7.81 3.21
180 11.80 8.50 8.26 3.57
190 12.45 9.39 8.72 3.95
200 13.11 10.33 9.18 4.34
240 15.73 14.47 11.02 6.09
260 Use with caution, where water hammer 17.04 16.79 11.94 7.06
280 18.35 19.25 12.86 8.10
300 is a concern. 13.77 9.20
320 14.69 10.37
340 15.61 11.60
360 16.53 12.90
380 17.45 14.26
400
420
440
460
480
500
157
HDPE DR 7 265 PSI (IPS size, oD controlled
ANSI/ASAE S376.3 PE3408, ASTM D2239 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size 3” 4” 6” 8” 10” 12” 14” 16” 18”
Avg.ID 2.440 3.136 4.589 6.013 7.494 8.890 9.760 11.156 12.550
Pipe OD 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000
Avg Wall
0.530 0.682 1.018 1.306 1.628 1.930 2.120 2.422 2.725
Min Wall
0.500 0.643 0.946 1.232 1.536 1.821 2.000 2.286 2.571
50 3.43 0.78 2.07 0.23 0.97 0.04 0.56 0.01 0.36 0.00 0.26 0.00 0.21 0.00 0.16 0.00 0.13 0.00
60 4.11 1.09 2.49 0.32 1.16 0.05 0.68 0.01 0.44 0.00 0.31 0.00 0.26 0.00 0.20 0.00 0.16 0.00
70 4.80 1.45 2.90 0.43 1.36 0.07 0.79 0.02 0.51 0.01 0.36 0.00 0.30 0.00 0.23 0.00 0.18 0.00
80 5.48 1.86 3.32 0.55 1.55 0.09 0.90 0.02 0.58 0.01 0.41 0.00 0.34 0.00 0.26 0.00 0.21 0.00
90 6.17 2.31 3.73 0.68 1.74 0.11 1.02 0.03 0.65 0.01 0.46 0.00 0.39 0.00 0.30 0.00 0.23 0.00
100 6.85 2.81 4.15 0.83 1.94 0.13 1.13 0.03 0.73 0.01 0.52 0.01 0.43 0.00 0.33 0.00 0.26 0.00
120 8.22 3.93 4.98 1.16 2.32 0.18 1.35 0.05 0.87 0.02 0.62 0.01 0.51 0.00 0.39 0.00 0.31 0.00
140 9.59 5.23 5.81 1.54 2.71 0.24 1.58 0.06 1.02 0.02 0.72 0.01 0.60 0.01 0.46 0.00 0.36 0.00
160 10.96 6.70 6.64 1.98 3.10 0.31 1.81 0.08 1.16 0.03 0.83 0.01 0.69 0.01 0.52 0.00 0.41 0.00
180 7.47 2.46 3.49 0.39 2.03 0.10 1.31 0.04 0.93 0.02 0.77 0.01 0.59 0.01 0.47 0.00
200 8.30 2.99 3.87 0.47 2.26 0.13 1.45 0.04 1.03 0.02 0.86 0.01 0.66 0.01 0.52 0.00
220 9.13 3.56 4.26 0.56 2.48 0.15 1.60 0.05 1.14 0.02 0.94 0.01 0.72 0.01 0.57 0.00
240 9.96 4.19 4.65 0.66 2.71 0.18 1.74 0.06 1.24 0.03 1.03 0.02 0.79 0.01 0.62 0.00
260 10.79 4.86 5.04 0.76 2.93 0.20 1.89 0.07 1.34 0.03 1.11 0.02 0.85 0.01 0.67 0.01
280 11.62 5.57 5.42 0.87 3.16 0.23 2.03 0.08 1.45 0.03 1.20 0.02 0.92 0.01 0.73 0.01
300 5.81 0.99 3.39 0.27 2.18 0.09 1.55 0.04 1.28 0.03 0.98 0.01 0.78 0.01
320 6.20 1.12 3.61 0.30 2.32 0.10 1.65 0.04 1.37 0.03 1.05 0.01 0.83 0.01
340 6.59 1.25 3.84 0.34 2.47 0.12 1.76 0.05 1.46 0.03 1.11 0.02 0.88 0.01
360 6.97 1.39 4.06 0.37 2.62 0.13 1.86 0.06 1.54 0.04 1.18 0.02 0.93 0.01
380 7.36 1.54 4.29 0.41 2.76 0.14 1.96 0.06 1.63 0.04 1.25 0.02 0.98 0.01
400 7.75 1.69 4.51 0.45 2.91 0.16 2.06 0.07 1.71 0.04 1.31 0.02 1.04 0.01
450 8.72 2.10 5.08 0.56 3.27 0.19 2.32 0.08 1.93 0.05 1.48 0.03 1.17 0.02
500 9.69 2.56 5.64 0.69 3.63 0.24 2.58 0.10 2.14 0.06 1.64 0.03 1.30 0.02
550 10.66 3.05 6.21 0.82 4.00 0.28 2.84 0.12 2.36 0.08 1.80 0.04 1.42 0.02
600 11.62 3.58 6.77 0.96 4.36 0.33 3.10 0.14 2.57 0.09 1.97 0.05 1.55 0.03
650 7.33 1.12 4.72 0.38 3.36 0.17 2.78 0.11 2.13 0.06 1.68 0.03
700 7.90 1.28 5.09 0.44 3.61 0.19 3.00 0.12 2.29 0.06 1.81 0.04
750 8.46 1.45 5.45 0.50 3.87 0.22 3.21 0.14 2.46 0.07 1.94 0.04
800 9.03 1.64 5.81 0.56 4.13 0.24 3.43 0.16 2.62 0.08 2.07 0.05
850 9.59 1.83 6.18 0.63 4.39 0.27 3.64 0.17 2.79 0.09 2.20 0.05
900 10.16 2.04 6.54 0.70 4.65 0.30 3.85 0.19 2.95 0.10 2.33 0.06
950 10.72 2.25 6.90 0.77 4.90 0.34 4.07 0.21 3.11 0.11 2.46 0.06
1000 11.28 2.48 7.26 0.85 5.16 0.37 4.28 0.23 3.28 0.12 2.59 0.07
1050 11.85 2.71 7.63 0.93 5.42 0.40 4.50 0.26 3.44 0.13 2.72 0.08
1100 7.99 1.01 5.68 0.44 4.71 0.28 3.61 0.15 2.85 0.08
1150 8.35 1.10 5.94 0.48 4.93 0.30 3.77 0.16 2.98 0.09
1200 8.72 1.19 6.19 0.52 5.14 0.33 3.93 0.17 3.11 0.10
1250 9.08 1.28 6.45 0.56 5.35 0.35 4.10 0.19 3.24 0.10
1300 9.44 1.38 6.71 0.60 5.57 0..38 4.26 0.20 3.37 0.11
1350 9.81 1.48 6.97 0.64 5.78 0.41 4.43 0.21 3.50 0.12
1400 10.17 1.58 7.23 0.69 6.00 0.44 4.59 0.23 3.63 0.13
1450 10.53 1.69 7.49 0.74 6.21 0.47 4.75 0.24 3.76 0.14
1500 10.90 1.80 7.74 0.78 6.42 0.50 4.92 0.26 3.89 0.15
1550 11.26 1.91 8.00 0.83 6.64 0.53 5.08 0.28 4.02 0.16
1600 11.62 2.03 8.26 0.88 6.85 0.56 5.25 0.29 4.14 0.16
1650 8.52 0.93 7.07 0.59 5.41 0.31 4.27 0.17
1700 8.78 0.99 7.28 0.63 5.57 0.33 4.40 0.18
1750 9.03 1.04 7.50 0.66 5.74 0.35 4.53 0.19
1800 9.29 1.10 7.71 0.70 5.90 0.36 4.66 0.21
1900 9.81 1.21 8.14 0.77 6.23 0.40 4.92 0.23
2000 10.32 1.33 8.57 0.85 6.56 0.44 5.18 0.25
2200 11.36 1.59 9.42 1.01 7.21 0.53 5.70 0.30
2300 Use with caution. 11.87 1.73 9.85 1.10 7.54 0.57 5.96 0.32
2400 10.28 1.19 7.87 0.62 6.22 0.35
2500 10.71 1.28 8.20 0.67 6.48 0.38
2600 11.14 1.38 8.52 0.72 6.74 0.41
2700 11.56 1.48 8.85 0.77 6.99 0.43
2800 11.99 1.58 9.18 0.82 7.25 0.46
2900 9.51 0.88 7.51 0.50
3000 9.83 0.94 7.77 0.53
3300 10.82 1.12 8.55 0.63
3600 11.80 1.31 9.33 0.74
3900 10.10 0.86
4000 10.36 0.90
158
size 3” 4” 6” 8” 10” 12” 14” 16” 18”
Avg.ID 2.674 3.440 5.065 6.593 8.218 9.746 10.700 12.230 13.760
Pipe OD 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000
Avg Wall
0.413 0.530 0.780 1.016 1.266 1.502 1.650 1.885 2.120
Min Wall
0.389 0.500 0.736 0.958 1.194 1.417 1.556 1.778 2.000
50 2.85 0.50 1.72 0.15 0.80 0.02

60 3.42 0.70 2.07 0.20 0.95 0.03
70 3.99 0.93 2.41 0.27 1.11 0.04
80 4.56 1.19 2.76 0.35 1.27 0.05
90 5.14 1.48 3.10 0.43 1.43 0.07
100 5.71 1.80 3.45 0.53 1.59 0.08 0.94 0.02
120 6.85 2.52 4.14 0.74 1.91 0.11 1.13 0.03
140 7.99 3.35 4.83 0.98 2.23 0.15 1.31 0.04
160 9.13 4.29 5.52 1.26 2.54 0.19 1.50 0.05 0.97 0.02
180 6.21 1.57 2.86 0.24 1.69 0.07 1.09 0.02
200 6.90 1.90 3.18 0.29 1.88 0.08 1.21 0.03
220 7.59 2.27 3.50 0.35 2.06 0.10 1.33 0.03
240 8.27 2.67 3.82 0.41 2.25 0.11 1.45 0.04 1.03 0.02
260 8.96 3.10 4.13 0.47 2.44 0.13 1.57 0.04 1.12 0.02
280 9.65 3.55 4.45 0.54 2.63 0.15 1.69 0.05 1.20 0.02
300 4.77 0.61 2.82 0.17 1.81 0.06 1.29 0.03 1.07 0.02
320 5.09 0.69 3.00 0.19 1.93 0.07 1.37 0.03 1.14 0.02
340 5.41 0.77 3.19 0.21 2.05 0.07 1.46 0.03 1.21 0.02
360 5.73 0.86 3.38 0.24 2.17 0.08 1.55 0.04 1.28 0.02
380 6.04 0.95 3.57 0.26 2.30 0.09 1.63 0.04 1.35 0.02
400 6.36 1.05 3.75 0.29 2.42 0.10 1.72 0.04 1.43 0.03
450 7.16 1.30 4.22 0.36 2.72 0.12 1.93 0.05 1.60 0.03 1.23 0.02
500 7.95 1.58 4.69 0.44 3.02 0.15 2.15 0.07 1.78 0.04 1.36 0.02
550 8.75 1.89 5.16 0.52 3.32 0.18 2.36 0.08 1.96 0.05 1.50 0.03
600 9.54 2.22 5.63 0.61 3.62 0.21 2.58 0.09 2.14 0.06 1.64 0.03 1.29 0.02
650 6.10 0.71 3.93 0.24 2.79 0.11 2.32 0.07 1.77 0.04 1.40 0.02
700 6.57 0.82 4.23 0.28 3.01 0.12 2.49 0.08 1.91 0.04 1.51 0.02
750 7.04 0.93 4.53 0.32 3.22 0.14 2.67 0.09 2.05 0.05 1.62 0.03
800 7.51 1.05 4.83 0.36 3.44 0.16 2.85 0.10 2.18 0.05 1.72 0.03
850 7.98 1.17 5.14 0.40 3.65 0.17 3.03 0.11 2.32 0.06 1.83 0.03
900 8.45 1.30 5.44 0.45 3.87 0.19 3.21 0.12 2.45 0.06 1.94 0.04
950 8.92 1.44 5.74 0.49 4.08 0.21 3.39 0.14 2.59 0.07 2.05 0.04
1000 9.39 1.58 6.04 0.54 4.30 0.24 3.56 0.15 2.73 0.08 2.15 0.04
1050 9.86 1.73 6.34 0.59 4.51 0.26 3.74 0.16 2.86 0.09 2.26 0.05
1100 6.65 0.65 4.72 0.28 3.92 0.18 3.00 0.09 2.37 0.05
1150 6.95 0.70 4.94 0.31 4.10 0.19 3.14 0.10 2.48 0.06
1200 7.25 0.76 5.15 0.33 4.28 0.21 3.27 0.11 2.59 0.06
1250 7.55 0.82 5.37 0.36 4.45 0.23 3.41 0.12 2.69 0.07
1300 7.85 0.88 5.58 0.38 4.63 0.24 3.55 0.13 2.80 0.07
1350 8.16 0.94 5.80 0.41 4.81 0.26 3.68 0.14 2.91 0.08
1400 8.46 1.01 6.01 0.44 4.99 0.28 3.82 0.15 3.02 0.08
1450 8.76 1.08 6.23 0.47 5.17 0.30 3.96 0.16 3.12 0.09
1500 9.06 1.15 6.44 0.50 5.35 0.32 4.09 0.17 3.23 0.09
1550 9.36 1.22 6.66 0.53 5.52 0.34 4.23 0.18 3.34 0.10
1600 9.67 1.29 6.87 0.56 5.70 0.36 4.36 0.19 3.45 0.11
1650 9.97 1.37 7.09 0.60 5.88 0.38 4.50 0.20 3.56 0.11
1700 7.30 0.63 6.06 0.40 4.64 0.21 3.66 0.12
1750 7.52 0.67 6.24 0.42 4.77 0.22 3.77 0.12
1800 7.73 0.70 6.41 0.45 4.91 0.23 3.88 0.13
1900 8.16 0.78 6.77 0.49 5.18 0.26 4.09 0.14
2000 8.59 0.85 7.13 0.54 5.46 0.28 4.31 0.16
2200 9.45 1.02 7.84 0.65 6.00 0.34 4.74 0.19
Use with caution.
2300 9.88 1.10 8.20 0.70 6.27 0.37 4.96 0.21
2400 8.55 0.76 6.55 0.40 5.17 0.22
2500 8.91 0.82 6.82 0.43 5.39 0.24
2600 9.27 0.88 7.09 0.46 5.60 0.26
2700 9.62 0.94 7.36 0.49 5.82 0.28
2800 9.98 1.01 7.64 0.53 6.03 0.30
2900 7.91 0.56 6.25 0.32
3000 8.18 0.60 6.46 0.34
3300 9.00 0.71 7.11 0.40
3600 9.82 0.84 7.76 0.47
3900 8.40 0.55
4000 8.62 0.57
159
size 3” 4” 6” 8” 10” 12” 14” 16” 18”
Avg.ID 2.826 3.632 5.349 6.963 8.678 10.292 11.300 12.914 14.532
Pipe OD 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000
Avg Wall
0.337 0.434 0.638 0.831 1.036 1.229 1.350 1.543 1.734
Min Wall
0.318 0.409 0.602 0.784 0.977 1.159 1.273 1.455 1.636
50 2.55 0.38 1.55 0.11 0.71 0.02

60 3.07 0.53 1.86 0.16 0.86 0.02
70 3.58 0.71 2.17 0.21 1.00 0.03
80 4.09 0.91 2.47 0.27 1.14 0.04
90 4.60 1.13 2.78 0.33 1.28 0.05
100 5.11 1.37 3.09 0.40 1.43 0.06 0.84 0.02
120 6.13 1.92 3.71 0.57 1.71 0.09 1.01 0.02
140 7.15 2.56 4.33 0.76 2.00 0.11 1.18 0.03
160 8.17 3.28 4.95 0.97 2.28 0.15 1.35 0.04
180 9.20 4.08 5.57 1.20 2.57 0.18 1.51 0.05
200 10.22 4.96 6.19 1.46 2.85 0.22 1.68 0.06 1.08 0.02 0.77 0.01
220 11.24 5.91 6.80 1.74 3.14 0.27 1.85 0.07 1.19 0.03 0.85 0.01
240 12.26 6.95 7.42 2.05 3.42 0.31 2.02 0.09 1.30 0.03 0.92 0.01
260 8.04 2.38 3.71 0.36 2.19 0.10 1.41 0.03 1.00 0.01
280 8.66 2.73 3.99 0.41 2.36 0.11 1.52 0.04 1.08 0.02
300 9.28 3.10 4.28 0.47 2.52 0.13 1.63 0.04 1.16 0.02
320 9.90 3.49 4.56 0.53 2.69 0.15 1.73 0.05 1.23 0.02
340 10.52 3.91 4.85 0.59 2.86 0.16 1.84 0.06 1.31 0.02 1.09 0.02
360 11.13 4.34 5.13 0.66 3.03 0.18 1.95 0.06 1.39 0.03 1.15 0.02
380 5.42 0.73 3.20 0.20 2.06 0.07 1.46 0.03 1.21 0.02
400 5.70 0.80 3.37 0.22 2.17 0.08 1.54 0.03 1.28 0.02
450 6.42 1.00 3.79 0.28 2.44 0.09 1.73 0.04 1.44 0.03
500 7.13 1.21 4.21 0.34 2.71 0.12 1.93 0.05 1.60 0.03 1.22 0.02
550 7.84 1.45 4.63 0.40 2.98 0.14 2.12 0.06 1.76 0.04 1.35 0.02
600 8.56 1.70 5.05 0.47 3.25 0.16 2.31 0.07 1.92 0.04 1.47 0.02
650 9.27 1.97 5.47 0.55 3.52 0.19 2.50 0.08 2.08 0.05 1.59 0.03
700 9.98 2.26 5.89 0.63 3.79 0.21 2.70 0.09 2.24 0.06 1.71 0.03 1.35 0.02
750 10.69 2.57 6.31 0.71 4.06 0.24 2.89 0.11 2.40 0.07 1.83 0.04 1.45 0.02
800 6.73 0.80 4.33 0.27 3.08 0.12 2.56 0.08 1.96 0.04 1.55 0.02
850 7.15 0.90 4.61 0.31 3.27 0.13 2.72 0.09 2.08 0.04 1.64 0.03
900 7.57 1.00 4.88 0.34 3.47 0.15 2.88 0.09 2.20 0.05 1.74 0.03
950 7.99 1.10 5.15 0.38 3.66 0.16 3.04 0.10 2.32 0.05 1.84 0.03
1000 8.42 1.21 5.42 0.42 3.85 0.18 3.20 0.12 2.45 0.06 1.93 0.03
1050 8.84 1.33 5.69 0.45 4.04 0.20 3.36 0.13 2.57 0.07 2.03 0.04
1100 9.26 1.45 5.96 0.50 4.24 0.22 3.51 0.14 2.69 0.07 2.13 0.04
1150 9.68 1.57 6.23 0.54 4.43 0.23 3.67 0.15 2.81 0.08 2.22 0.04
1200 10.10 1.70 6.50 0.58 4.62 0.25 3.83 0.16 2.94 0.08 2.32 0.05
1250 10.52 1.83 6.77 0.63 4.81 0.27 3.99 0.17 3.06 0.09 2.42 0.05
1300 7.04 0.68 5.01 0.29 4.15 0.19 3.18 0.10 2.51 0.05
1350 7.31 0.72 5.20 0.32 4.31 0.20 3.30 0.10 2.61 0.06
1400 7.58 0.78 5.39 0.34 4.47 0.21 3.43 0.11 2.70 0.06
1450 7.86 0.83 5.59 0.36 4.63 0.23 3.55 0.12 2.80 0.07
1500 8.13 0.88 5.78 0.38 4.79 0.24 3.67 0.13 2.90 0.07
1550 8.40 0.94 5.97 0.41 4.95 0.26 3.79 0.14 2.99 0.08
1600 8.67 0.99 6.16 0.43 5.11 0.27 3.91 0.14 3.09 0.08
1650 8.94 1.05 6.36 0.46 5.27 0.29 4.04 0.15 3.19 0.09
1700 9.21 1.11 6.55 0.48 5.43 0.31 4.16 0.16 3.28 0.09
1750 9.48 1.17 6.74 0.51 5.59 0.32 4.28 0.17 3.38 0.10
1800 9.75 1.23 6.93 0.54 5.75 0.34 4.40 0.18 3.48 0.10
1900 10.29 1.36 7.32 0.59 6.07 0.38 4.65 0.20 3.67 0.11
2000 7.70 0.65 6.39 0.42 4.89 0.22 3.86 0.12
2200 8.47 0.78 7.03 0.50 5.38 0.26 4.25 0.15
Use with caution.
2300 8.86 0.85 7.35 0.54 5.63 0.28 4.44 0.16
2400 7.67 0.58 5.87 0.30 4.64 0.17
2500 7.99 0.63 6.12 0.33 4.83 0.18
2600 8.31 0.68 6.36 0.35 5.02 0.20
2700 8.63 0.72 6.61 0.38 5.22 0.21
2800 8.95 0.77 6.85 0.40 5.41 0.23
2900 7.09 0.43 5.60 0.24
3000 7.34 0.46 5.80 0.26
3300 8.07 0.55 6.38 0.31
3600 8.81 0.64 6.96 0.36
3900 7.53 0.42
4000 7.73 0.44
160
HDPE DR 13.5 128 PSI (IPS size, oD controlled

size 3” 4” 6” 8” 10” 12” 14” 16” 18”
Avg.ID 2.950 3.794 5.583 7.269 9.062 10.748 11.802 13.488 15.174
Pipe OD 3.500 4.500 6.625 8.625 10.750 12.750 14.000 16.000 18.000
Avg Wall 0.275 0.353 0.521 0.678 0.844 1.001 1.099 1.256 1.413
Min Wall 0.259 0.333 0.491 0.639 0.796 0.944 1.037 1.185 1.333
50 2.34 0.31 1.42 0.09 0.65 0.01
60 2.81 0.43 1.70 0.13 0.79 0.02
70 3.28 0.58 1.98 0.17 0.92 0.03
80 3.75 0.74 2.27 0.22 1.05 0.03
90 4.22 0.92 2.55 0.27 1.18 0.04
100 4.69 1.11 2.83 0.33 1.31 0.05 0.77 0.01
120 5.63 1.56 3.40 0.46 1.57 0.07 0.93 0.02
140 6.56 2.08 3.97 0.61 1.83 0.09 1.08 0.03
160 7.50 2.66 4.54 0.78 2.09 0.12 1.24 0.03
180 8.44 3.31 5.10 0.97 2.36 0.15 1.39 0.04
200 5.67 1.18 2.62 0.18 1.54 0.05 0.99 0.02 0.71 0.01
220 6.24 1.41 2.88 0.22 1.70 0.06 1.09 0.02 0.78 0.01
240 6.80 1.66 3.14 0.25 1.85 0.07 1.19 0.02 0.85 0.01
260 7.37 1.92 3.40 0.29 2.01 0.08 1.29 0.03 0.92 0.01
280 7.94 2.20 3.67 0.34 2.16 0.09 1.39 0.03 0.99 0.01
300 3.93 0.38 2.32 0.11 1.49 0.04 1.06 0.02
320 4.19 0.43 2.47 0.12 1.59 0.04 1.13 0.02
340 4.45 0.48 2.63 0.13 1.69 0.05 1.20 0.02 1.00 0.01
360 4.71 0.54 2.78 0.15 1.79 0.05 1.27 0.02 1.05 0.01
380 4.97 0.59 2.93 0.16 1.89 0.06 1.34 0.02 1.11 0.02
400 5.24 0.65 3.09 0.18 1.99 0.06 1.41 0.03 1.17 0.02
450 5.89 0.81 3.47 0.22 2.24 0.08 1.59 0.03 1.32 0.02
500 6.54 0.98 3.86 0.27 2.48 0.09 1.77 0.04 1.46 0.03 1.12 0.01
550 7.20 1.17 4.25 0.33 2.73 0.11 1.94 0.05 1.61 0.03 1.23 0.02
600 7.85 1.38 4.63 0.38 2.98 0.13 2.12 0.06 1.76 0.04 1.35 0.02
650 8.51 1.60 5.02 0.44 3.23 0.15 2.30 0.07 1.90 0.04 1.46 0.02
700 5.41 0.51 3.48 0.17 2.47 0.08 2.05 0.05 1.57 0.03 1.24 0.01
750 5.79 0.58 3.73 0.20 2.65 0.09 2.20 0.05 1.68 0.03 1.33 0.02
800 6.18 0.65 3.97 0.22 2.83 0..10 2.34 0.06 1.79 0.03 1.42 0.02
850 6.56 0.73 4.22 0.25 3.00 0.11 2.49 0.07 1.91 0.04 1.51 0.02
900 6.95 0.81 4.47 0.28 3.18 0.12 2.64 0.08 2.02 0.04 1.59 0.02
950 7.34 0.90 4.72 0.31 3.36 0.13 2.78 0.08 2.13 0.04 1.68 0.02
1000 7.72 0.98 4.97 0.34 3.53 0.15 2.93 0.09 2.24 0.05 1.77 0.03
1050 8.11 1.08 5.22 0.37 3.71 0.16 3.08 0.10 2.35 0.05 1.86 0.03
1100 5.47 0.40 3.89 0.18 3.22 0.11 2.47 0.06 1.95 0.03
1150 5.71 0.44 4.06 0.19 3.37 0.12 2.58 0.06 2.04 0.04
1200 5.96 0.47 4.24 0.21 3.52 0.13 2.69 0.07 2.13 0.04
1250 6.21 0.51 4.41 0.22 3.66 0.14 2.80 0.07 2.21 0.04
1300 6.46 0.55 4.59 0.24 3.81 0.15 2.92 0.08 2.30 0.04
1350 6.71 0.59 4.77 0.26 3.95 0.16 3.03 0.08 2.39 0.05
1400 6.96 0.63 4.94 0.27 4.10 0.17 3.14 0.09 2.48 0.05
1450 7.20 0.67 5.12 0.29 4.25 0.19 3.25 0.10 2.57 0.05
1500 7.45 0.71 5.30 0.31 4.39 0.20 3.36 0.10 2.66 0.06
1550 7.70 0.76 5.47 0.33 4.54 0.21 3.48 0.11 2.75 0.06
1600 7.95 0.80 5.65 0.35 4.69 0.22 3.59 0.12 2.84 0.07
1650 8.20 0.85 5.83 0.37 4.83 0.24 3.70 0.12 2.92 0.07
1700 6.00 0.39 4.98 0.25 3.81 0.13 3.01 0.07
1750 6.18 0.41 5.13 0.26 3.92 0.14 3.10 0.08
1800 6.36 0.44 5.27 0.28 4.04 0.14 3.19 0.08
1900 6.71 0.48 5.57 0.31 4.26 0.16 3.37 0.09
2000 7.06 0.53 5.86 0.34 4.49 0.18 3.54 0.10
2200 7.77 0.63 6.44 0.40 4.93 0.21 3.90 0.12
Use with caution.
2300 8.12 0.69 6.74 0.44 5.16 0.23 4.08 0.13
2400 7.03 0.47 5.38 0.25 4.25 0.14
2500 7.32 0.51 5.61 0.27 4.43 0.15
2600 7.62 0.55 5.83 0.29 4.61 0.16
2700 7.91 0.59 6.06 0.31 4.78 0.17
2800 8.20 0.63 6.28 0.33 4.96 0.18
2900 6.50 0.35 5.14 0.20
3000 6.73 0.37 5.32 0.21
3300 7.40 0.44 5.85 0.25
3600 8.07 0.52 6.38 0.29
3900 6.91 0.34
4000 7.09 0.36
161
C900 dr 18 class 150 (c.i.o.d.)
AWWA C900 ASTM D1784 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size 4” 6” 8” 10” 12”
Avg.ID 4.234 6.088 7.984 9.792 11.646
Pipe OD 4.800 6.900 9.050 11.100 13.200
Avg Wall
0.283 0.406 0.533 0.654 0.777
Min Wall
0.267 0.383 0.503 0.617 0.733
25 0.57 0.01 0.28 0.00 0.16 0.00 0.11 0.00 0.08 0.00
50 1.14 0.05 0.55 0.01 0.32 0.00 0.21 0.00 0.15 0.00
75 1.71 0.11 0.83 0.02 0.48 0.01 0.32 0.00 0.23 0.00
100 2.28 0.19 1.10 0.03 0.64 0.01 0.43 0.00 0.30 0.00
125 2.84 0.29 1.38 0.05 0.80 0.01 0.53 0.00 0.38 0.00
150 3.41 0.41 1.65 0.07 0.96 0.02 0.64 0.01 0.45 0.00
175 3.98 0.54 1.93 0.09 1.12 0.02 0.74 0.01 0.53 0.00
200 4.55 0.69 2.20 0.12 1.28 0.03 0.85 0.01 0.60 0.01
225 5.12 0.86 2.48 0.15 1.44 0.04 0.96 0.01 0.68 0.01
250 5.69 1.05 2.75 0.18 1.60 0.05 1.06 0.02 0.75 0.01
275 6.26 1.25 3.03 0.21 1.76 0.06 1.17 0.02 0.83 0.01
300 6.83 1.47 3.30 0.25 1.92 0.07 1.28 0.02 0.90 0.01
325 7.40 1.70 3.58 0.29 2.08 0.08 1.38 0.03 0.98 0.01
350 7.97 1.95 3.85 0.33 2.24 0.09 1.49 0.03 1.05 0.01
375 8.53 2.22 4.13 0.38 2.40 0.10 1.60 0.04 1.13 0.02
400 9.10 2.50 4.40 0.43 2.56 0.11 1.70 0.04 1.20 0.02
450 4.95 0.53 2.88 0.14 1.91 0.05 1.35 0.02
500 5.50 0.65 3.20 0.17 2.13 0.06 1.50 0.03
550 6.05 0.77 3.52 0.21 2.34 0.08 1.65 0.03
600 6.60 0.91 3.84 0.24 2.55 0.09 1.80 0.04
700 7.71 1.20 4.48 0.32 2.98 0.12 2.11 0.05
800 8.81 1.54 5.12 0.41 3.40 0.15 2.41 0.07
900 9.91 1.92 5.76 0.51 3.83 0.19 2.71 0.08
1000 6.40 0.62 4.26 0.23 3.01 0.10
1100 7.04 0.74 4.68 0.28 3.31 0.12
1200 7.68 0.87 5.11 0.32 3.61 0.14
1300 8.32 1.01 5.53 0.38 3.91 0.16
1400 8.96 1.16 5.96 0.43 4.21 0.19
1500 9.60 1.32 6.38 0.49 4.51 0.21
1600 10.24 1.49 6.81 0.55 4.81 0.24
1700 7.23 0.62 5.11 0.27
1800 7.66 0.69 5.41 0.29
1900 8.08 0.76 5.72 0.33
2000 8.51 0.83 6.02 0.36
2100 8.94 0.91 6.32 0.39
2200 9.36 0.99 6.62 0.43
2300 6.92 0.46
2400 7.22 0.50
2500 7.52 0.54
2600 7.82 0.58
2700 8.12 0.63
2800
2900
3000
3100
3200
3300
3400
3500
3600
3800
3900 Shaded area represents velocities over 5 fps.
4000
Use with caution.
4200
4400
4600
4800
5000
5500
6000
6500
7000
7500
8000
8500
162
C900 dr 25 class 100 (c.i.o.d.)

AWWA C900 ASTM D1784 C=150 PSI LOSS PER 100 FEET OF PIPE (PSI/100 FT)
size 4” 6” 8” 10” 12”
Avg.ID 4.392 6.314 8.282 10.158 12.080
Pipe OD 4.800 6.900 9.050 11.100 13.200
Avg Wall 0.204 0.293 0.384 0.471 0.560
Min Wall 0.192 0.276 0.362 0.444 0.528
25 0.53 0.01 0.26 0.00 0.15 0.00 0.10 0.00 0.07 0.00
50 1.06 0.04 0.51 0.01 0.30 0.00 0.20 0.00 0.14 0.00
75 1.59 0.09 0.77 0.02 0.45 0.00 0.30 0.00 0.21 0.00
100 2.12 0.16 1.02 0.03 0.59 0.01 0.40 0.00 0.28 0.00
125 2.64 0.24 1.28 0.04 0.74 0.01 0.49 0.00 0.35 0.00
150 3.17 0.34 1.54 0.06 0.89 0.02 0.59 0.01 0.42 0.00
175 3.70 0.45 1.79 0.08 1.04 0.02 0.69 0.01 0.49 0.00
200 4.23 0.58 2.05 0.10 1.19 0.03 0.79 0.01 0.56 0.00
225 4.76 0.72 2.30 0.12 1.34 0.03 0.89 0.01 0.63 0.01
250 5.29 0.88 2.56 0.15 1.49 0.04 0.99 0.01 0.70 0.01
275 5.82 1.05 2.81 0.18 1.64 0.05 1.09 0.02 0.77 0.01
300 6.35 1.23 3.07 0.21 1.78 0.06 1.19 0.02 0.84 0.01
325 6.87 1.43 3.33 0.24 1.93 0.07 1.29 0.02 0.91 0.01
350 7.40 1.63 3.58 0.28 2.08 0.07 1.38 0.03 0.98 0.01
375 3.84 0.32 2.23 0.08 1.48 0.03 1.05 0.01
400 4.09 0.36 2.38 0.10 1.58 0.04 1.12 0.02
450 4.61 0.45 2.68 0.12 1.78 0.04 1.26 0.02
500 5.12 0.54 2.97 0.14 1.98 0.05 1.40 0.02
550 5.63 0.65 3.27 0.17 2.17 0.06 1.54 0.03
600 6.14 0.76 3.57 0.20 2.37 0.08 1.68 0.03
700 7.16 1.01 4.16 0.27 2.77 0.10 1.96 0.04
800 8.19 1.29 4.76 0.35 3.16 0.13 2.24 0.05
900 9.21 1.61 5.35 0.43 3.56 0.16 2.52 0.07
1000 10.23 1.95 5.95 0.52 3.95 0.19 2.80 0.08
1100 6.54 0.62 4.35 0.23 3.08 0.10
1200 7.14 0.73 4.74 0.27 3.36 0.12
1300 7.73 0.85 5.14 0.31 3.63 0.14
1400 8.33 0.97 5.54 0.36 3.91 0.16
1500 8.92 1.11 5.93 0.41 4.19 0.18
1600 9.52 1.25 6.33 0.46 4.47 0.20
1700 6.72 0.52 4.75 0.22
1800 7.12 0.57 5.03 0.25
1900 7.51 0.63 5.31 0.27
2000 7.91 0.70 5.59 0.30
2100 8.30 0.76 5.87 0.33
2200 8.70 0.83 6.15 0.36
2300 6.43 0.39
2400 6.71 0.42
2500 6.99 0.45
2600 7.27 0.49
2700 7.55 0.52
2800 7.83 0.56
2900 8.11 0.60
3000 8.39 0.64
3100 8.67 0.68
3200
3300 Shaded area represents velocities over 5 fps.
3400
Use with caution.
3500
3600
3800
3900
4000
4200
4400
4600
4800
5000
5500
6000
6500
7000
7500
8000
8500
163
Drip Equations
Below Grade Drip Hose & Dripline Installations

When installing Blue Stripe drip hose below grade, consult ANSI/ASAE S376.2: Design, Installation and Performance of
Underground, Thermoplastic Irrigation Pipelines for installation protocols regarding trench conditions, water packing of the
drip hose prior to backfill & the quality of backfill material. Failure to follow these installation protocols will shorten the life
of the tubing and may void the warranty.
164
Pressure Loss Through Water Meters
Precipitation Rate Reference Charts
Pressure Loss—psi Slope, Angle & Ratio Precipitation Rates % Angle Ratio Slope Factor
Flow Nominal Size

GPM 0 0°
~
⁄8"
5
⁄4"
3
1" 11⁄2" 2" 3" 4"
1 0.2 0.1
10 5° 43' 10:1 1
~
2 0.3 0.2
3 0.4 0.3
20 11° 19' 5:1
~
4 0.6 0.5 0.1
5 0.9 0.6 0.2
30 16° 42'
~ ~~
6 1.3 0.7 0.3 33 18° 16' 3:1 1.054
7 1.8 0.8 0.4
8 2.3 1.0 0.5 40 21° 48'
9 3.0 1.3 0.6
50 26° 34' 2:1 1.12
~
10 3.7 1.6 0.7
11 4.4 1.9 0.8
60 30° 58'
~~ ~
12 5.1 2.2 0.9
13 6.1 2.6 1.0 67 33° 50' 1.5:1 1.20
14 7.2 3.1 1.1 70 35° 0'
15 8.3 3.6 1.2
16 9.4 4.1 1.4 0.4 80 38° 40'
~
17 10.7 4.6 1.6 0.5
18 12.0 5.2 1.8 0.6 90 42° 0'
~
19 13.4 5.8 2.0 0.7
20 15.0 6.5 2.2 0.8 100 45° 0' 1:1 1.41
~
22 7.9 2.8 1.0
24 9.5 3.4 1.2 ~ ~ ~~ ~ ~ ~ ~ ~ ~
26 11.2 4.0 1.4
28 13.0 4.6 1.6
200
190
180
170
160
150
140
130
120
110
30 15.0 5.3 1.8 0.7
32 6.0 2.1 0.8
27'
15'
57'
32'
0'
19'
54° 28'
52° 26'
50° 42'
47° 44'
34 6.9 2.4 0.9
63°
62°
60°
59°
58°
56°
36 7.8 2.7 1.0
38 8.7 3.0 1.2
0.5:1
40 9.6 3.3 1.3

42 10.6 3.6 1.4
44 11.7 3.9 1.5
46 12.8 4.2 1.6
48 13.9 4.5 1.7
50 15.0 4.9 1.9 0.7
52 5.3 2.1 Maximum Precipitation Rates
54 5.7 2.2
Maximum Precipitation Rates: Inches Per Hour
56 6.2 2.3
Soil Texture 0 to 5% slope 5 to 8% slope 8 to 12% slope 12% + slope
58 6.7 2.5
Cover Bare Cover Bare Cover Bare Cover Bare
60 7.2 2.7 1.0
65 8.3 3.2 1.1 Coarse sandy soils 2.00 2.00 2.00 1.50 1.50 1.0 1.0 0.50
70 9.8 3.7 1.3
75 11.3 4.3 1.5 Coarse sandy soils over compact subsoils 1.75 1.50 1.25 1.00 1.00 0.75 0.75 0.40
80 12.8 4.9 1.6 0.7
Uniform light sandy loams 1.75 1.00 1.25 0.80 1.00 0.60 0.75 0.40
90 16.1 6.2 2.0 0.8
100 20.0 7.8 2.5 0.9 Light sandy loams over compact subsoils 1.25 0.75 1.00 0.50 0.75 0.40 0.50 0.30
110 9.5 2.9 1.0
120 11.3 3.4 1.2 Uniform silt loams 1.00 0.50 0.80 0.40 0.60 0.30 0.40 0.20
130 13.0 3.9 1.4
Silt loams over compact subsoil 0.60 0.30 0.50 0.25 0.40 0.15 0.30 0.10
140 15.1 4.5 1.6
150 17.3 5.1 1.8 Heavy clay or clay loam 0.20 0.15 0.15 0.10 0.12 0.08 0.10 0.06
160 20.0 5.8 2.1
The maximum PR values listed are as suggested by the United States Department of Agriculture.
170 6.5 2.4
The values are average and may vary with respect to actual soil condition and condition of ground cover.
180 7.2 2.7
190 8.0 3.0
200 9.0 3.2
220 11.0 3.9
240 13.0 4.7
260 15.0 5.5
280 17.3 6.3
300 20.0 7.2
350 10.0
400 13.0
450 16.2
500 20.0
165
Wire Sizing
Method of Wire Sizing for Electrical Minimum Operating Voltages at Various Static
Components of an Automatic Pressures (standard 24 V ac solenoid)
Irrigation System
Chart 1 Chart 2
Data Needed Minimum Solenoid Operating Voltage Copper Wire Resistance
• Maximum current draw of the electrical unit (valve or Under Various Line Pressure of Various Sizes
controller) in amperes (I) Voltage Voltage Sizes Resistance at 20°C
• Distance in feet (one way) to the electrical unit (F) Line Pressure (Internal Bleed (External Bleed AWG Ohms per 1000 ft.
• The allowable voltage drop in the wire without affecting Configurations) Configurations)
4 .25
functions of the electrical unit (Vd) 200 psi (13,8 Bar) 21.1 6 .40
175 psi (12,1 Bar) 20.2 8 .64
Steps
1. Calculate the maximum allowable wire resistance per 150 psi (10,3 Bar) 19.1 20.0 10 1.02
1000 feet with the following formula: 125 psi (8,6 Bar) 18.2 19.1 12 1.62
R = *500 x Vd 100 psi (6,9 Bar) 17.1 18.2 14 2.57

Fx1
75 psi (5,2 Bar) 16.1 17.3 16 4.10
where R = allowable wire resistance per 1000 feet.
50 psi (3,4 Bar) 16.0 16.4 18 6.51
2. Select the wire size from Chart #2 which has a

resistance less than that calculated in the above formula. Chart 3
Maximum One-way Distance (ft.) Between Controller and Valve
(standard 24 VAC solenoid) †
Example: A valve with a minimum operating voltage of
20 volts and inrush current of .30 amps is to be located Valve Wire Sizing
2680 ft. from a controller. The controller minimum output Ground Control Wire
voltage is 24 V ac. Wire 18 16 14 12 10 8 6
18 1020 1260 1470 1640 1770 1860 1930

The allowable voltage drop
16 1260 1630 2000 2330 2610 2810 2960
(Vd) = 24 – 20 = 4 volts
The distance to valve (F) = 2680 ft. 14 1470 2000 2590 3180 3710 4150 4480
The current draw (I) = .3 amps 12 1640 2330 3180 4120 5050 5900 6590
10 1770 2610 3710 5050 6540 8030 9380

R = 2680
500 x 4 = 2.49 ohm/1000 ft.
x .3 8 1860 2810 4150 5900 8030 10400 12770
6 1930 2960 4480 6590 9380 12770 16540

From Chart #2 we find that #14 AWG wire has slightly too
† Solenoid Model: 24 V ac Pressure: 150 psi Voltage Drop: 4 V Min. Op. Voltage: 20 V Amperage (peak): 0.3A
much resistance. Therefore, choose #12 AWG copper wire.
The accompanying charts are useful for quick and easy
selection of wire sizes for valves with standard and optional
Multiplier Factor for Various Controller Output
solenoids. Chart #3 is set up to provide maximum wire Voltages and Optional Low-voltage Solenoids
runs given a standard 24 V ac valve with a minimum
operating voltage of 20 volts and a controller output of Chart 4 Chart 5
24 V ac Chart #4 is a multiplier factor for determining Controller 24-Volt Solenoids Controller 12-Volt Solenoids
maximum wire runs for other controller output voltages Output Output
Voltage 24 V ac 24 V ac-D 24 VDC Voltage 12 V.a.c. 12 V ac-D 12 VDC
and optional solenoids.
28 2.00 5.77 5.45 16 .58 2.50 1.96
Example: Determine maximum wire run to a valve with 27 1.75 5.05 4.77 15 .50 2.08 1.63
model 24 V ac‑D solenoid and controller output voltage of 26 1.50 4.33 4.09 14 .41 1.67 1.30
26 volts and #14 control and ground wire.
25 1.25 3.61 3.41 13 .33 1.25 .98
From Chart #3 we find a length of 2590 ft. with #14 24 1.00 2.88 2.73 12 .25 .83 .65
ground and control wire. From Chart #4 the multiplier 23 .75 2.16 2.05 11 .17 .42 .33
factor at 26 V ac controller output with a model 24 V ac‑D 22 .50 1.44 1.36
solenoid is 4.33. Therefore, the maximum wire distance to
the valve is: 4.33 x 2590 feet = 11,215 feet.
* This assumes control wire and ground wire are the same size.
166
Sprays Metric Data
MPR Plus Spray Nozzles—Metric
5’ Series with 0° Trajectory—Red 8’ Series with 5° Trajectory —Green 10’ Series with 12° Trajectory—Blu
Pressure Flow Radius Pressure Flow Radius Pressure
Pattern Desc. Pattern Desc. Flow Radius
Bar kPa Kg/cm2 LPM m Bar kPa Kg/cm2 LPM m Pattern Desc.
Bar kPa Kg/cm2 LPM m
1,5 150 1,53 0,22 1,3 1,5 150 1,53 0,69 2,2 1,5 150 1,53 1,20 2,8
2,0 200 2,04 0,33 1,5 2,0 200 2,04 0,88 2,4 2,0 200 2,04 1,48 3,0
1/4 5-Q 2,5 250 2,55 0,41 1,6 1/4 8-Q 2,5 250 2,55 0,96 2,5 10-Q 2,5 250 2,55 1,75 3,2
1/4
3,0 300 3,06 0,49 1,7 3,0 300 3,06 1,02 2,6 3,0 300 3,06 2,03 3,5
3,5 350 3,57 0,58 1,8 3,5 350 3,57 1,11 2,8 3,5 350 3,57 2,30 3,7
2,07-2,76 207-276 2,11-2,82 0,34 1,5 2,07-2,76 207-276 2,11-2,82 0,83 2,4 2,07-2,76 207-276 2,11-2,82 1,25 3,0
5-Q-PC 8-Q-PC 10-Q-PC
2,76-5,18 276-518 2,82-5,28 0,38 1,5 2,76-5,18 276-518 2,82-5,28 0,95 2,4 2,76-5,18 276-518 2,82-5,28 1,40 3,0
1,5 150 1,53 0,30 1,3 1,5 150 1,53 0,92 2,2 1,5 150 1,53 1,66 2,8
2,0 200 2,04 0,44 1,5 2,0 200 2,04 1,11 2,4 2,0 200 2,04 1,93 3,0
1/3 5-T 2,5 250 2,55 0,55 1,6 1/3 8-T 2,5 250 2,55 1,28 2,5 10-T 2,5 250 2,55 2,28 3,2
1/3
3,0 300 3,06 0,66 1,7 3,0 300 3,06 1,42 2,6 3,0 300 3,06 2,59 3,5
3,5 350 3,57 0,77 1,8 3,5 350 3,57 1,53 2,8 3,5 350 3,57 2,87 3,7
2,07-2,76 207-276 2,11-2,82 0,45 1,5 2,07-2,76 207-276 2,11-2,82 1,10 2,4 2,07-2,76 207-276 2,11-2,82 1,67 3,0
5-T-PC 8-T-PC 10-T-PC
2,76-5,18 276-518 2,82-5,28 0,49 1,5 2,76-5,18 276-518 2,82-5,28 1,33 2,4 2,76-5,18 276-518 2,82-5,28 1,89 3,0
1,5 150 1,53 0,44 1,3 1,5 150 1,53 1,49 2,3 1,5 150 1,53 2,34 2,8
2,0 200 2,04 0,69 1,5 2,0 200 2,04 1,84 2,4 2,0 200 2,04 2,65 3,0
1/2 5-H 2,5 250 2,55 0,81 1,6 1/2 8-H 2,5 250 2,55 2,08 2,5 10-H 2,5 250 2,55 3,02 3,2
1/2
3,0 300 3,06 0,92 1,7 3,0 300 3,06 2,29 2,6 3,0 300 3,06 3,40 3,4
3,5 350 3,57 1,03 1,8 3,5 350 3,57 2,48 2,8 3,5 350 3,57 3,79 3,5
2,07-2,76 207-276 2,11-2,82 0,68 1,5 2,07-2,76 207-276 2,11-2,82 1,67 2,4 2,07-2,76 207-276 2,11-2,82 2,50 3,0
5-H-PC 8-H-PC 10-H-PC
2,76-5,18 276-518 2,82-5,28 0,76 1,5 2,76-5,18 276-518 2,82-5,28 1,89 2,4 2,76-5,18 276-518 2,82-5,28 2,84 3,0
1,5 150 1,53 0,63 1,3 1,5 150 1,53 2,21 2,2 1,5 150 1,53 2,86 2,8
2,0 200 2,04 0,91 1,5 2,0 200 2,04 2,60 2,4 2,0 200 2,04 3,57 3,0
2/3 5-TT 2,5 250 2,55 1,06 1,6 2/3 8-TT 2,5 250 2,55 2,89 2,5 10-TT 2,5 250 2,55 3,98 3,1
2/3
3,0 300 3,06 1,20 1,7 3,0 300 3,06 3,13 2,6 3,0 300 3,06 4,28 3,3
3,5 350 3,57 1,34 1,8 3,5 350 3,57 3,35 2,8 3,5 350 3,57 4,53 3,4
2,07-2,76 207-276 2,11-2,82 0,87 1,5 2,07-2,76 207-276 2,11-2,82 2,23 2,4 2,07-2,76 207-276 2,11-2,82 3,40 3,0
5-TT-PC 8-TT-PC 10-TT-PC
2,76-5,18 276-518 2,82-5,28 1,02 1,5 2,76-5,18 276-518 2,82-5,28 2,65 2,4 2,76-5,18 276-518 2,82-5,28 3,79 3,0
1,5 150 1,53 0,82 1,3 1,5 150 1,53 2,47 2,2 1,5 150 1,53 3,25 2,8
2,0 200 2,04 1,06 1,5 2,0 200 2,04 2,83 2,4 2,0 200 2,04 3,85 3,0
3/4 5-TQ 2,5 250 2,55 1,22 1,6 3/4 8-TQ 2,5 250 2,55 3,11 2,5 10-TQ 2,5 250 2,55 4,32 3,1
3/4
3,0 300 3,06 1,37 1,7 3,0 300 3,06 3,35 2,6 3,0 300 3,06 4,74 3,3
3,5 350 3,57 1,53 1,8 3,5 350 3,57 3,54 2,8 3,5 350 3,57 5,15 3,4
2,07-2,76 207-276 2,11-2,82 0,98 1,5 2,07-2,76 207-276 2,11-2,82 2,42 2,4 2,07-2,76 207-276 2,11-2,82 3,75 3,0
5-TQ-PC 8-TQ-PC 10-TQ-PC
2,76-5,18 276-518 2,82-5,28 1,10 1,5 2,76-5,18 276-518 2,82-5,28 2,65 2,4 2,76-5,18 276-518 2,82-5,28 4,13 3,0
1,5 150 1,53 1,03 1,3 1,5 150 1,53 2,97 2,2 1,5 150 1,53 4,45 2,7
2,0 200 2,04 1,39 1,5 2,0 200 2,04 3,69 2,4 2,0 200 2,04 5,50 3,0
Full 5-F 2,5 250 2,55 1,60 1,6 Full 8-F 2,5 250 2,55 4,16 2,5 10-F 2,5 250 2,55 5,92 3,1
Full
3,0 300 3,06 1,81 1,7 3,0 300 3,06 4,58 2,6 3,0 300 3,06 6,41 3,3
3,5 350 3,57 2,03 1,8 3,5 350 3,57 4,96 2,8 3,5 350 3,57 7,07 3,4
2,07-2,76 207-276 2,11-2,82 1,33 1,5 2,07-2,76 207-276 2,11-2,82 3,22 2,4 2,07-2,76 207-276 2,11-2,82 5,04 3,0
5-F-PC 8-F-PC 10-FQ-PC
2,76-5,18 276-518 2,82-5,28 1,48 1,5 2,76-5,18 276-518 2,82-5,28 3,79 2,4 2,76-5,18 276-518 2,82-5,28 5,72 3,0
12’ Series with 23° Trajectory —Brown 15’ Series with 27° Trajectory—Black Special Patterns—Orange
Pressure Flow Radius Pressure Flow Radius Nozzle Pressure Flow Special Patterns
Pattern Desc. Pattern Desc.
Bar kPa Kg/cm2 LPM m Bar kPa Kg/cm2 LPM m Pattern Bar kPa Kg/cm2 LPM W x L (m)
1,5 150 1,53 1,58 3,4 1,5 150 1,53 2,69 4,3 1,5 150 1,53 1,48 1,0 x 3,8
2,0 200 2,04 1,85 3,6 2,0 200 2,04 3,15 4,5 2,0 200 2,04 1,68 1,2 x 4,5
12-Q 2,5 250 2,55 2,13 3,8 15-Q 2,5 250 2,55 3,67 4,8 4-EST
1/4 1/4 2,5 250 2,55 1,89 1,4 x 5,1
3,0 300 3,06 2,31 4,0 3,0 300 3,06 4,19 4,9 3,0 300 3,06 2,10 1,6 x 5,7
3,5 350 3,57 2,39 4,0 3,5 350 3,57 4,71 4,9 3,5 350 3,57 2,29 1,9 x 6,1
2,07-2,76 207-276 2,11-2,82 1,82 3,7 2,07-2,76 207-276 2,11-2,82 2,84 4,6 2,07-2,76 207-276 2,11-2,82 1,63 1,2 x 4,4
12-Q-PC 15-Q-PC 4-EST-PC
2,76-5,18 276-518 2,82-5,28 2,01 3,7 2,76-5,18 276-518 2,82-5,28 3,07 4,6 2,76-5,18 276-518 2,82-5,28 1,89 1,2 x 4,4
1,5 150 1,53 2,26 3,4 1,5 150 1,53 3,70 4,2 1,5 150 1,53 2,94 1,0 x 7,6
2,0 200 2,04 2,67 3,6 2,0 200 2,04 4,11 4,5 4-CST 2,0 200 2,04 3,35 1,2 x 9,0
1/3 12-T 2,5 250 2,55 3,08 3,8 1/3 15-T 2,5 250 2,55 4,64 4,7 2,5 250 2,55 3,74 1,2 x 9,1
3,0 300 3,06 3,43 3,9 3,0 300 3,06 5,12 4,7 3,0 300 3,06 4,10 1,2 x 9,3
3,5 350 3,57 3,70 4,0 3,5 350 3,57 5,53 4,7 3,5 350 3,57 4,43 1,2 x 9,5
2,07-2,76 207-276 2,11-2,82 2,42 3,7 2,07-2,76 207-276 2,11-2,82 3,79 4,6 2,07-2,76 207-276 2,11-2,82 3,26 1,2 x 9,1
12-T-PC 15-T-PC 4-CST-PC
2,76-5,18 276-518 2,82-5,28 2,65 3,7 2,76-5,18 276-518 2,82-5,28 4,16 4,6 2,76-5,18 276-518 2,82-5,28 3,79 1,2 x 9,1
1,5 150 1,53 3,69 3,4 1,5 150 1,53 5,37 4,1 1,5 150 1,53 3,92 2,7 x 5,5
2,0 200 2,04 4,07 3,6 2,0 200 2,04 6,14 4,5 9-SST 2,0 200 2,04 4,47 2,7 x 5,5
1/2 12-H 2,5 250 2,55 4,62 3,8 1/2 15-H 2,5 250 2,55 7,12 4,8 2,5 250 2,55 4,97 2,7 x 5,9
3,0 300 3,06 5,25 4,1 3,0 300 3,06 7,81 4,9 3,0 300 3,06 5,45 2,8 x 6,3
3,5 350 3,57 5,94 4,3 3,5 350 3,57 8,13 4,9 3,5 350 3,57 5,92 3,1 x 6,8
2,07-2,76 207-276 2,11-2,82 3,63 3,7 2,07-2,76 207-276 2,11-2,82 5,68 4,6 2,07-2,76 207-276 2,11-2,82 4,16 2,7 x 5,5
12-H-PC 15-H-PC 9-SST-PC
2,76-5,18 276-518 2,82-5,28 4,00 3,7 2,76-5,18 276-518 2,82-5,28 6,25 4,6 2,76-5,18 276-518 2,82-5,28 4,54 2,7 x 5,5
1,5 150 1,53 4,46 3,4 1,5 150 1,53 7,02 4,3 1,5 150 1,53 2,63 1,2 x 7,6
2,0 200 2,04 5,36 3,6 2,0 200 2,04 8,17 4,5 4-SST 2,0 200 2,04 3,31 1,2 x 9,0
2/3 12-TT 2,5 250 2,55 5,91 3,8 2/3 15-TT 2,5 250 2,55 9,42 4,8 2,5 250 2,55 3,74 1,2 x 9,5
3,0 300 3,06 6,40 3,9 3,0 300 3,06 10,31 4,9 3,0 300 3,06 4,10 1,3 x 9,9
3,5 350 3,57 6,86 4,0 3,5 350 3,57 10,80 4,9 3,5 350 3,57 4,43 1,5 x 10,1
2,07-2,76 207-276 2,11-2,82 4,85 3,7 2,07-2,76 207-276 2,11-2,82 7,57 4,6 2,07-2,76 207-276 2,11-2,82 3,33 1,2 x 9,1
12-TT-PC 15-TT-PC 4-SST-PC
2,76-5,18 276-518 2,82-5,28 5,30 3,7 2,76-5,18 276-518 2,82-5,28 8,33 4,6 2,76-5,18 276-518 2,82-5,28 3,79 1,2 x 9,1
1,5 150 1,53 4,31 3,3 1,5 150 1,53 8,28 4,1 1,5 150 1,53 0,31 0,6 x 1,6
2,0 200 2,04 5,68 3,6 2,0 200 2,04 9,65 4,5 2-SST 2,0 200 2,04 0,34 0,6 x 1,8
3/4 12-TQ 2,5 250 2,55 6,10 3,8 3/4 15-TQ 2,5 250 2,55 10,79 4,7 2,5 250 2,55 0,36 0,6 x 2,0
3,0 300 3,06 6,44 3,9 3,0 300 3,06 11,89 4,8 3,0 300 3,06 0,41 0,7 x 2,1
3,5 350 3,57 6,86 4,0 3,5 350 3,57 12,98 4,9 3,5 350 3,57 0,46 0,9 x 2,1
2,07-2,76 207-276 2,11-2,82 5,45 3,7 2,07-2,76 207-276 2,11-2,82 8,71 4,6 2,07-2,76 207-276 2,11-2,82 0,34 0,6 x 1,8
12-TQ-PC 15-TQ-PC 2-SST-PC
2,76-5,18 276-518 2,82-5,28 6,06 3,7 2,76-5,18 276-518 2,82-5,28 9,47 4,6 2,76-5,18 276-518 2,82-5,28 0,38 0,6 x 1,8
1,5 150 1,53 6,67 3,4 1,5 150 1,53 11,29 4,1 1,5 150 1,53 1,80 1,2 x 5,2
2,0 200 2,04 8,09 3,6 2,0 200 2,04 13,34 4,5 4S-SST 2,0 200 2,04 2,05 1,2 x 5,5
Full 12-F 2,5 250 2,55 8,67 3,8 Full 15-F 2,5 250 2,55 15,05 4,8 2,5 250 2,55 2,27 1,2 x 5,7
3,0 300 3,06 9,36 3,9 3,0 300 3,06 16,40 4,9 3,0 300 3,06 2,49 1,3 x 5,8
3,5 350 3,57 10,32 4,0 3,5 350 3,57 17,45 4,9 3,5 350 3,57 2,71 1,5 x 5,8
2,07-2,76 207-276 2,11-2,82 7,27 3,7 2,07-2,76 207-276 2,11-2,82 11,36 4,6 2,07-2,76 207-276 2,11-2,82 1,89 1,2 x 5,5
12-F-PC 15-F-PC 4S-SST-PC
2,76-5,18 276-518 2,82-5,28 7,95 3,7 2,76-5,18 276-518 2,82-5,28 12,49 4,6 2,76-5,18 276-518 2,82-5,28 2,23 1,2 x 5,5
Radius shown in meters. ■ = nozzles with PCDs. All performance specifications are
based on the stated working pressure available at the base of the sprinkler.
167
Sprays Metric Data
TVAN Variable Arc Nozzles Performance Data — Metric

8 Series-Green 10 Series-Blue 12 Series-Brown 15’ Series-Black 17’ Series-Gray
Precip. Rate Precip. Rate Precip. Rate Precip. Rate Precip. Rate
Pattern Bar LPM Rad. ▲ ■ LPM Rad ▲ ■ LPM Rad ▲ ■ LPM Rad ▲ ■ LPM Rad ▲ ■
(m) (m) (m) (m) (m)
1,50 1,30 2,20 74,44 64,46 1,80 2,80 63,63 55,10 3,00 3,40 71,92 62,28 3,90 4,60 51,08 44,23 4,60 4,90 53,10 45,98
2,00 1,40 2,40 67,36 58,33 1,90 3,00 58,51 50,67 3,10 3,60 66,29 57,41 4,20 4,60 55,01 47,64 5,10 5,20 52,27 45,27
90° 2,50 1,60 2,60 65,59 56,80 2,30 3,00 70,82 61,33 3,80 3,80 72,93 63,16 4,90 4,80 58,94 51,04 5,80 5,40 55,12 47,74
3,00 1,80 2,70 68,43 59,26 2,60 3,00 73,90 64,00 4,50 4,10 74,19 64,25 5,60 4,90 64,64 55,98 6,50 5,50 59,55 51,57
3,50 1,90 2,70 72,23 62,55 2,80 3,00 86,22 74,67 4,80 4,30 71,94 62,30 6,10 4,90 70,41 60,97 7,00 5,50 64,13 55,54
1,50 2,10 2,20 60,12 52,07 3,20 2,50 70,95 61,44 5,20 3,40 62,33 53,98 6,50 4,10 53,58 46,40 7,40 4,40 52,97 45,87
2,00 2,40 2,40 57,74 50,00 3,60 2,70 64,63 55,97 5,70 3,60 60,94 52,78 7,10 4,50 48,58 42,07 8,00 5,10 42,62 36,91
180° 2,50 2,60 2,40 62,55 54,17 3,90 2,90 64,26 55,65 6,40 4,00 55,43 48,00 8,00 4,60 52,39 45,37 10,70 5,30 52,78 45,71
3,00 2,80 2,50 62,08 53,76 4,30 3,00 66,20 57,33 7,10 4,30 53,21 46,08 8,80 4,60 57,63 49,91 10,70 5,30 52,78 45,71
3,50 2,90 2,80 51,26 44,39 4,70 3,00 72,36 62,67 7,70 4,30 57,71 49,97 9,40 4,60 61,56 53,31 11,60 5,50 53,14 46,02
1,50 3,20 2,20 61,08 52,88 4,50 2,50 66,51 57,59 7,40 3,20 66,76 57,80 8,60 3,80 55,02 47,63 9,90 4,20 51,85 44,89
2,00 3,50 2,40 56,13 48,60 4,90 2,70 62,09 53,76 8,10 3,90 49,20 42,59 9,90 4,50 45,16 39,10 10,80 5,10 38,36 33,21
270° 2,50 3,80 2,40 60,95 52,76 5,60 2,90 61,51 53,26 9,40 4,20 49,23 42,62 10,90 4,60 47,59 41,20 12,70 5,20 43,39 37,56
3,00 4,20 2,50 62,08 53,75 6,20 3,00 63,64 55,10 10,40 4,30 51,96 44,99 11,90 4,70 49,77 43,09 14,20 5,30 46,70 40,43
3,50 4,60 2,80 54,20 46,93 6,70 3,00 68,77 59,54 10,90 4,30 54,46 47,15 12,90 4,90 49,63 42,97 15,40 5,50 47,03 40,72
1,50 4,20 2,20 60,12 52,07 6,20 2,50 68,73 59,52 8,60 3,00 66,21 57,33 9,90 3,80 47,50 41,14 11,00 5,20 28,19 24,41
2,00 4,80 2,40 57,74 50,00 6,90 2,70 65,58 56,79 10,00 3,80 47,98 41,55 11,80 4,50 40,37 34,96 12,80 5,50 29,32 25,39
360° 2,50 5,50 2,60 56,37 48,82 7,90 2,90 65,09 56,36 11,10 3,60 59,34 51,39 12,90 4,60 42,24 36,58 14,20 5,50 32,52 28,17
3,00 6,10 2,70 57,98 50,21 8,80 3,00 67,75 58,67 12,10 3,50 68,44 59,27 14,00 4,70 43,91 38,03 15,60 5,50 35,73 30,94
3,50 6,70 2,70 63,68 55,14 9,50 3,00 73,14 63,33 12,90 3,70 65,29 56,54 15,00 4,90 43,29 37,48 17,00 5,50 38,94 33,72
▲ Precipitation rates are for triangular spacing, shown in millimeters (Metric) or inches (English) per hour, calculated at 50% of diameter. Shaded data indicates optimal operating pressure.
■ Precipitation rates are for square spacing, shown in millimeters (Metric) or inches (English) per hour, calculated at 50% of diameter. Data based on 360°.
Per formance Data—

Precision™ Series Rotating Nozzles
Precip Rate Rotation
Precip.Rate
Arc Bar LPM Radius
 (mm./hr
 (mm./ Speed
hr.) (seconds)
1.7 0.68 4.3 9.0 10.37 14.0
2.4 0.95 4.9 9.6 11.03 13.5
3.1 1.55 5.8 11.1 12.83 13.5
45° 3.8 1.74 6.1 11.2 12.99 13.0
4.5 1.21 6.1 7.8 9.03 12.5
5.2 1.32 6.7 7.1 8.17 12.0
1.7 1.70 4.9 17.2 19.85 12.5
2.4 2.04 5.8 14.6 16.89 12.3
3.1 2.54 6.7 13.5 15.63 12.0
90° 3.8 2.84 7.0 13.9 16.01 11.8
4.5 3.14 7.6 13.0 15.00 11.6
5.2 3.37 7.9 12.9 14.87 11.4
1.7 1.93 4.9 19.5 22.50 12.4
2.4 2.88 6.1 18.6 21.46 12.0
3.1 3.48 7.0 17.0 19.64 11.5
120° 3.8 3.79 7.3 17.0 19.61 11.3
4.5 4.20 7.6 17.4 20.06 11.0
5.2 4.47 7.6 18.5 21.32 10.6
1.7 2.88 4.6 16.5 19.07 11.7
2.4 3.94 5.8 14.1 16.27 11.4
3.1 4.96 6.7 13.2 15.28 11.0
180° 3.8 5.53 7.0 13.5 15.58 10.5
4.5 6.25 7.6 12.9 14.91 10.2
5.2 6.70 7.9 12.8 14.78 10.0
1.7 4.24 4.6 48.7 56.21 11.5
2.4 5.49 5.8 39.3 45.36 11.2
3.1 6.36 6.4 37.3 43.02 11.0
240° 3.8 7.15 6.7 38.2 44.10 10.5
4.5 7.87 7.0 38.5 44.40 10.0
5.2 8.52 7.3 38.2 44.11 9.5
1.7 4.09 4.3 17.9 20.69 11.2
2.4 5.19 5.5 13.7 15.88 11.0
3.1 6.93 6.4 13.5 15.58 10.5
270° 3.8 8.06 6.7 14.3 16.52 10.0
4.5 8.93 7.3 13.3 15.38 10.0
5.2 9.88 7.6 13.6 15.68 9.5
1.7 6.85 4.6 19.7 22.71 12.5
2.4 8.90 5.8 15.9 18.38 12.3
3.1 11.96 6.7 16.0 18.43 12.0
360° 3.8 13.55 7.0 16.5 19.11 11.0
4.5 14.61 7.3 16.4 18.92 9.8
5.2 15.82 7.6 16.4 18.88 9.5
168
Sprays Metric Data
Performance Data Performance Data
10° Stream Spray—Metric 35° Stream Spray—Metric
Pressure Radius Pressure Radius
Pattern Desc. LPM meters Pattern Desc. LPM meters
Bar kPa Kg/cm2 Bar kPa Kg/cm2
90° 10-SSQ 1,5 150 1,53 2,40 4,4 90° 35-SSQ1,5 150 1,53 2,40 5,6
2,0 200 2,04 2,95 4,8 2,0 200 2,04 2,95 6,0
2,5 250 2,55 3,31 5,1 2,5 250 2,55 3,31 6,3
3,0 300 3,06 3,63 5,3 3,0 300 3,06 3,63 6,5
3,5 350 3,57 3,93 5,5 3,5 350 3,57 3,93 6,7
10-SSQ-PC 2,8-3,5 280-350 2,86-3,57 2,65 4,0 35-SSQ-PC 2,8-3,5 280-350 2,86-3,57 2,65 5,2
4,1-4,8 410-480 4,18-4,90 2,65 4,6 4,1-4,8 410-480 4,18-4,90 2,65 5,5
180° 10-SSH 1,5 150 1,53 3,92 4,4 180° 35-SSH 1,5 150 1,53 3,92 5,6
2,0 200 2,04 4,47 4,8 2,0 200 2,04 4,47 6,0
2,5 250 2,55 4,97 5,1 2,5 250 2,55 4,97 6,3
3,0 300 3,06 5,45 5,3 3,0 300 3,06 5,45 6,5
3,5 350 3,57 5,92 5,5 3,5 350 3,57 5,92 6,7
10-SSH-PC 2,8-3,5 280-350 2,86-3,57 5,30 4,0 35-SSH-PC 2,8-3,5 280-350 2,86-3,57 5,30 5,2
4,1-4,8 410-480 4,18-4,90 5,30 4,6 4,1-4,8 410-480 4,18-4,90 5,30 5,5
360° 10-SSF 1,5 150 1,53 7,01 4,4 360° 35-SSF 1,5 150 1,53 7,01 5,6
2,0 200 2,04 7,84 4,8 2,0 200 2,04 7,84 6,0
2,5 250 2,55 8,71 5,1 2,5 250 2,55 8,71 6,3
3,0 300 3,06 9,53 5,3 3,0 300 3,06 9,53 6,5
3,5 350 3,57 10,30 5,5 3,5 350 3,57 10,30 6,7
10-SSF-PC 2,8-3,5 280-350 2,86-3,57 6,81 4,0 35-SSF-PC 2,8-3,5 280-350 2,86-3,57 6,81 5,2
4,1-4,8 410-480 4,18-4,90 7,57 4,6 4,1-4,8 410-480 4,18-4,90 7,57 5,5
Note: Stream sprays not recommended for turf applications.
500 Series Adjustable Stream Bubbler Nozzle Performance Data

1 Bar 1,5 Bar 2 Bar 2,5 Bar 3 Bar
100 kPa 150 kPa 200 kPa 250 kPa 300 kPa
1,02 Kg/cm 1,53 Kg/cm 2,04 Kg/cm 2,55 Kg/cm 3,06 Kg/cm2
2 2 2 2
Pattern Model No. LPM Rad LPM Rad LPM Rad LPM Rad LPM Rad
2/60° 511-30 3,6 4,84 4,4 5,99 4,8 6,95 5,1 7,62 5,3 8,25
4/60° 512-30 2,5 6,72 3,1 8,30 3,3 9,59 3,7 10,71 4,2 11,81
6/60° 514-30 2,1 8,38 2,5 10,27 3,0 11,89 3,2 13,30 3,5 14,67
2/180° 516-30 3,6 4,84 4,4 5,99 4,8 6,95 5,1 7,62 5,3 8,25
Radius shown in meters. Data based on 360°.
Adjustable Flood Bubbler Nozzle

Flood Bubbler Performance Data Performance Data—Metric
Pattern Model No. Bar kPa Kg/cm2 LPM
Pattern 2,5 Bar
Model No. 3 Bar 3,5 Bar 4 Bar 1,00 100 1,02 6,32
LPM LPM LPM LPM 360° 514-20 1,25 125 1,28 7,14
FB-25-PC 0,95 0,95 0,95 0,95 Flood 1,50 150 1,53 7,84
FB-50-PC 1,63 1,77 1,89 1,89 l 1,75 175 1,79 8,38
Flood
l FB-100-PC 3,53 3,66 3,79 3,79 2,00 200 2,04 8,93
2,25 225 2,30 9,28
FB-200-ADJ-PC 7,05 7,32 7,57 7,57 2,50 250 3,55 9,65
2,75 275 3,81 10,20
Stream Bubbler Nozzle Performance Data

1 Bar 2 Bar 2,5 Bar 3 Bar 3,5 Bar 4 Bar
Pattern Description
LPM Rad LPM Rad LPM Rad LPM Rad LPM Rad LPM Rad
2/60° SB-90 2,7 2,21 3,9 3,19 4,3 3,59 4,7 3,94 4,9 4,27 5,4 4,57
2/60° SB-90-PC2 0,5 0,82 0,5 0,85 0,5 0,87 0,5 0,90
4/60° SB-180 2,1 3,76 3,6 5,32 4,0 5,96 4,5 6,55 4,9 7,09 5,1 7,53
4/60° SB-180-PC2 0,8 1.81 0,8 1,87 0,8 1,90 0,8 1,92
6/60° SB-360 1,3 5,23 2,4 7,43 2,6 8,26 2,8 9,01 3,1 9,73 3,7 11,77
6/60° SB-360-PC2 0,5 2,82 0,5 2,85 0,5 2,88 0,5 2,91
2/180° SB-2-180 2,7 2,21 3,9 3,19 4,3 3,59 4,7 3,94 4,9 4,27 5,4 4,57
2/180° SB-2-180-PC2 0,5 0,82 0,5 0,85 0,5 0,87 0,5 0,90
2/60x2/60° SB-4-180 2,1 3,76 3,6 5,32 4,0 5,96 4,5 6,55 4,9 7,09 5,1 7,53
2/60x2/60° SB-4-180-PC2 0,8 1,81 0,8 1,87 0,8 1,90 0,8 1,92
Super Funny Pipe Fittings Friction Loss Data Super Funny Pipe Friction Loss Data—
LPM Flow LPM Flow
5 10 15 20 25 LPM 5 10 15 20 25
850-36 20mm Male Adapter 1,35 4,13 9,55 21,7 37,7 BAR Loss 0,30 1,02 2,00 3,77 5,58
850-35 13mm Male Adapter 0,89 3,08 6,89 16,1 28,2 This chart indicates the amount of pressure loss (kPa) per
850-31 13mm Male Elbow 1,87 6,43 13,8 28,7 46,9 foot of Super Funny Pipe at stated flow rates (LPM).
850-34 13mm Female Elbow 1,87 6,43 13,8 28,7 46,9

850-32 20mm Male Elbow 2,23 7,42 17,8 7,10 61,4
This chart indicates the amount of pressure loss (kPa) per foot of Super Funny Pipe
at stated flow rates (LPM).
169
Sprays Metric Data
Performance Data Precision™ Series Spray Nozzles—Metric
Arc Bar LPM Radius Arc Bar LPM Radius Arc Bar LPM Radius
 (mm./hr.) r (mm./hr.)  (mm./hr.)  (mm./hr.)  (mm./hr.)  (mm./hr.)
1.38 0.14 1.43 25.25 29.15 1.38 0.38 2.32 25.41 29.34 1.38 0.61 2.90 26.02 30.04
5-60° 8-60° 10-60°
2.07 0.16 1.52 25.24 29.15 2.07 0.42 2.44 25.22 29.13 2.07 0.64 3.05 24.95 28.81
2.76 0.16 1.52 25.24 29.15 2.76 0.45 2.47 26.84 31.00 2.76 0.68 3.05 26.42 30.50
3.45 0.18 1.62 25.08 28.96 3.45 0.49 2.53 27.69 31.98 3.45 0.72 3.05 27.88 32.20
1.38 0.21 1.40 25.89 29.90 1.38 0.53 2.13 27.95 32.28 1.38 0.87 2.90 24.93 28.79
5Q 8Q 10Q
2.07 0.24 1.52 25.05 28.92 2.07 0.62 2.44 25.22 29.13 2.07 0.98 3.05 25.44 29.37
2.76 0.25 1.52 25.44 29.37 2.76 0.68 2.50 26.19 30.24 2.76 1.06 3.11 26.33 30.41
3.45 0.25 1.52 25.83 29.83 3.45 0.68 2.56 24.96 28.82 3.45 1.06 3.14 25.82 29.82
1.38 0.26 1.34 25.77 29.76 1.38 0.76 2.32 25.41 29.34 1.38 1.17 2.90 25.21 29.11
5T 8T 10T
2.07 0.34 1.52 26.42 30.50 2.07 0.83 2.44 25.22 29.13 2.07 1.29 3.05 24.95 28.81
2.76 0.35 1.58 25.24 29.14 2.76 0.87 2.50 25.10 28.98 2.76 1.36 3.05 26.42 30.50
3.45 0.37 1.65 24.91 28.77 3.45 0.89 2.53 25.03 28.91 3.45 1.40 3.05 27.15 31.35
1.38 0.26 1.22 26.00 30.03 1.38 0.95 2.29 26.09 30.13 10- 1.38 1.55 2.99 25.06 28.94
5-150° 2.07 0.42 1.52 26.15 30.20 8-150° 2.07 1.02 2.44 24.77 28.60 150° 2.07 1.63 3.05 25.24 29.15
2.76 0.45 1.58 26.38 30.46 2.76 1.06 2.47 25.05 28.93 2.76 1.67 3.11 24.83 28.67
3.45 0.49 1.65 26.50 30.60 3.45 1.10 2.50 25.32 29.24 3.45 1.74 3.17 24.97 28.83
1.38 0.38 1.34 25.27 29.18 1.38 0.98 2.13 25.96 29.97 1.38 1.82 2.96 24.96 28.82
5H 2.07 0.49 1.52 25.44 29.37 8H 2.07 1.25 2.44 25.22 29.13 10H 2.07 1.93 3.05 24.95 28.81
2.76 0.51 1.55 25.39 29.32 2.76 1.28 2.44 25.84 29.83 2.76 2.08 3.14 25.36 29.29
3.45 0.53 1.58 25.15 29.04 3.45 1.29 2.44 25.99 30.01 3.45 2.12 3.17 25.33 29.25
1.38 0.38 1.34 25.27 29.18 1.38 1.25 2.32 27.95 32.27 10- 1.38 2.12 2.99 28.53 32.94
5-210° 8-210°
2.07 0.57 1.58 27.14 31.34 2.07 1.36 2.44 27.52 31.78 210° 2.07 2.20 3.05 28.37 32.76
2.76 0.61 1.62 27.86 32.18 2.76 1.40 2.47 27.59 31.86 2.76 2.27 3.17 27.14 31.34
3.45 0.64 1.68 27.49 31.75 3.45 1.44 2.50 27.65 31.92 3.45 2.35 3.20 27.51 31.77
1.38 0.53 1.31 27.78 32.08 1.38 1.29 2.13 25.46 29.40 1.38 2.38 2.93 25.08 28.96
5TT 8TT 10TT
2.07 0.64 1.52 24.95 28.81 2.07 1.67 2.44 25.22 29.13 2.07 2.61 3.05 25.32 29.23
2.76 0.70 1.52 27.15 31.35 2.76 1.73 2.44 26.20 30.25 2.76 2.76 3.14 25.25 29.15
3.45 0.71 1.52 27.59 31.86 3.45 1.74 2.44 26.31 30.39 3.45 2.80 3.17 25.10 28.99
5TQ 1.38 0.57 1.31 25.80 29.79 8TQ 1.38 1.55 2.19 25.15 29.04 10TQ 1.38 2.69 2.90 25.02 28.89
2.07 0.76 1.52 25.44 29.37 2.07 1.85 2.44 24.35 28.11 2.07 2.99 3.05 25.12 29.01
2.76 0.79 1.52 26.71 30.84 2.76 2.04 2.44 26.83 30.98 2.76 3.18 3.14 25.18 29.07
3.45 0.83 1.52 27.98 32.31 3.45 2.08 2.44 27.33 31.55 3.45 3.26 3.17 25.28 29.20
5F 1.38 0.64 1.22 25.99 30.01 8F 1.38 2.08 2.13 27.46 31.70 10F 1.38 3.60 2.93 25.21 29.12
2.07 0.98 1.52 25.44 29.37 2.07 2.50 2.44 25.22 29.13 2.07 3.90 3.05 25.19 29.09
2.76 0.98 1.52 25.44 29.37 2.76 2.57 2.44 25.99 30.01 2.76 4.09 3.14 24.90 28.75
3.45 0.98 1.52 25.44 29.37 3.45 2.69 2.44 27.14 31.33 3.45 4.24 3.17 25.33 29.25
Arc Bar LPM Radius Arc Bar LPM Radius Arc Bar LPM Radius
 (mm./hr.)  (mm./hr.)  (mm./hr.)  (mm./hr.)  (mm./hr.)  (mm./hr.)
1.38 0.91 3.51 26.63 30.75 1.38 1.32 4.27 26.21 30.26 4X30 1.38 2.35 1.2 x 8.4 25.28 30.04
12-60° 15-60°
2.07 0.95 3.66 25.48 29.42 2.07 1.48 4.57 25.44 29.37 SST 2.07 2.50 1. 2 x 9 26.91 28.81
2.76 0.98 3.69 26.06 30.10 2.76 1.51 4.60 25.75 29.73 2.76 2.54 1. 2 x 9 27.31 30.50
3.45 1.06 3.72 27.61 31.88 3.45 1.59 4.66 26.33 30.41 3.45 2.57 1. 2 x 9 27.72 32.20
1.38 1.29 3.47 25.60 29.56 1.38 2.01 4.33 25.72 29.70 4X15 1.38 1.21 1.2 x 4.5 26.09 28.79
12Q 15Q
2.07 1.40 3.66 25.14 29.03 2.07 2.20 4.57 25.22 29.12 LCS 2.07 1.25 1.2 x 4.5 26.91 29.37
2.76 1.48 3.69 26.06 30.10 2.76 2.27 4.60 25.75 29.73 2.76 1.29 1.2 x 4.5 27.72 30.41
3.45 1.48 3.75 25.22 29.12 3.45 2.31 4.66 25.50 29.44 3.45 1.29 1.2 x 4.5 27.72 29.82
1.38 1.74 3.51 25.52 29.47 1.38 2.73 4.36 25.84 29.83 4X15 1.38 1.21 1.2 x 4.5 26.09 29.11
12T 2.07 1.85 3.66 15T
24.97 28.83 2.07 2.91 4.57 25.11 29.00 RCS 2.07 1.25 1.2 x 4.5 26.91 28.81
2.76 1.93 3.72 25.14 29.03 2.76 3.07 4.66 25.39 29.32 2.76 1.29 1.2 x 4.5 27.72 30.50
3.45 1.97 3.75 25.22 29.12 3.45 3.10 4.69 25.37 29.30 3.45 1.29 1.2 x 4.5 27.72 31.35
12- 1.38 2.27 3.54 26.50 30.60 15- 1.38 3.48 4.48 25.31 29.22 4X18 1.38 1.36 1.2 x 5.4 24.46 28.96
150° 2.07 2.35 3.66 25.59 29.55 150° 2.07 3.63 4.57 25.36 29.28 SST 2.07 1.40 1.2 x 5.4 25.14 29.23
2.76 2.38 3.72 25.16 29.05 2.76 3.79 4.63 25.73 29.71 2.76 1.44 1.2 x 5.4 25.82 29.15
3.45 2.42 3.75 25.14 29.03 3.45 4.16 4.66 27.93 32.25 3.45 1.44 1.2 x 5.4 25.82 28.99
1.38 2.65 3.51 25.89 29.90 1.38 4.16 4.42 25.59 29.55 4X9 1.38 0.68 1.2 x 2.7 24.46 28.89
12H 2.07 2.80 3.66 15H 2.07 4.39 4.57 25.22 29.12
25.14 29.03 LCS 2.07 0.72 1.2 x 2.7 25.82 29.01
2.76 2.99 3.75 25.55 29.50 2.76 4.73 4.69 25.78 29.77 2.76 0.76 1.2 x 2.7 27.18 29.07
3.45 3.03 3.78 25.45 29.39 3.45 4.85 4.72 26.06 30.10 3.45 0.76 1.2 x 2.7 27.18 29.20
12- 1.38 2.88 3.54 27.63 31.91 15- 1.38 4.35 4.42 26.76 30.90 4X9 1.38 0.68 1.2 x 2.7 24.46 29.12
210° 2.07 3.10 3.66 27.86 32.17 210° 2.07 4.54 4.57 26.09 30.13 RCS 2.07 0.72 1.2 x 2.7 25.82 29.09
2.76 3.18 3.75 27.16 31.36 2.76 4.92 4.72 26.09 30.57 2.76 0.76 1.2 x 2.7 27.18 28.75
3.45 3.22 3.78 27.04 31.23 3.45 5.30 4.75 28.14 32.50 3.45 0.76 1.2 x 2.7 27.18 29.25
1.38 3.41 3.47 25.41 29.34 1.38 5.49 4.42 25.30 29.22
12TT 15TT
2.07 3.75 3.66 25.22 29.13 2.07 5.83 4.57 25.11 29.00
2.76 3.94 3.75 25.22 29.12 2.76 5.98 4.63 25.09 28.97
3.45 3.97 3.78 25.06 28.93 3.45 6.09 4.66 25.23 29.14
1.38 3.97 3.47 25.69 29.67 15TQ 1.38 6.51 4.42 26.01 30.04
12TQ
2.07 4.35 3.66 25.39 29.32 2.07 6.74 4.57 25.16 29.05
2.76 4.50 3.72 25.42 29.36 2.76 6.89 4.57 25.72 29.70
3.45 4.62 3.75 25.64 29.61 3.45 7.19 4.66 25.81 29.80
12F 1.38 5.11 3.51 24.97 28.83 15F 1.38 8.33 4.42 25.59 29.55
2.07 5.60 3.66 25.14 29.03 2.07 8.74 4.57 25.11 29.00
2.76 6.02 3.78 25.29 29.21 2.76 8.90 4.63 24.88 28.73
3.45 6.06 3.81 25.05 28.92 3.45 9.08 4.66 25.08 28.96
170
Rotors Metric Data
300 Series:
Shrub w/COM (360° Arc Disc)
(Model Nos. 300-10-00COM & 340-10-15COM)—Metric
Nozzle Bar LPM Radius 300 Series: 300-15 and 300-25 Omni ™ Adjustable-radius Nozzle
01 3,5 7,9 4,3 Performance Chart
01 5,0 10,8 4,8 Pressure
02 3,5 9,5 7,0 Radius
Bar kPa Kg/cm2 meters 90° 112° 135° 157,7° 180° 202,5° 225° 270° 360°
02 5,0 13,5 7,6 Flow LPM (at designated arcs)
03 3,5 17,4 8,2 4,5 3,2 4,0 4,9 5,7 6,5 7,3 8,1 9,7 12,9
03 5,0 23,0 8,8 5,0 3,5 4,4 5,3 6,2 7,1 8,0 8,8 10,6 14,1
2,5 250 2,55 6,0 4,2 5,2 6,2 7,3 8,3 9,3 10,4 12,5 16,6
63 3,5 10,2 8,6 7,0 4,8 5,9 7,2 8,4 9,6 10,7 11,9 14,3 19,1
63 5,0 14,0 9,1 8,0 5,6 6,9 8,3 9,7 11,1 12,5 13,9 16,7 22,2
93 3,5 14,0 8,9 6,0 4,8 6,0 7,2 8,4 9,6 10,8 12,0 14,4 19,2
7,0 5,6 6,9 8,3 9,7 11,1 12,5 13,9 16,7 22,2
93 5,0 19,4 9,4
3,5 350 3,57 8,0 6,3 7,8 9,4 11,0 12,6 14,2 15,7 18,9 25,2
Omni (Min) 3,5 10,2 4,9 9,0 7,0 8,8 10,6 12,3 14,1 15,8 17,6 21,1 28,2
Omni (Min) 5,0 14,5 5,4 10,0 7,8 9,7 11,7 13,6 15,6 17,5 19,5 23,4 31,2
Omni (Max) 3,5 21,1 9,2 All performance specifications are based on the stated working pressure available at the base of
Omni (Max) 5,0 23,8 10 the sprinkler.
300 Series: Fixed-radius Nozzle Performance Chart

Pressure
Radius 300 Radius
Nozzle Kg/ 90° 112° 135° 157,7° 180° 202,5° 225° 270° 360°
Bar kPa Series 340 Series
cm2 Flow LPM (at designated arcs)
2,5 250 2,55 4,9 4,9 2,20 2,76 3,31 3,86 4,41 4,96 5,51 6,61 8,81
01
3,5 350 3,57 5,5 5,5 2,75 3,44 4,13 4,82 5,51 6,20 6,88 8,26 11,0
2,5 250 2,55 6,5 4,9 2,77 3,45 4,15 4,84 5,53 6,23 6,92 8,30 11,1
02
3,5 350 3,57 7,4 5,5 3,25 4,07 4,88 5,69 6,50 7,32 8,13 9,76 13,0
2,5 250 2,55 8,6 4,9 5,22 6,52 7,83 9,13 10,4 11,7 13,1 15,7 20,9
03
3,5 350 3,57 9,2 5,5 6,15 7,69 9,23 10,8 12,3 13,8 15,4 18,5 24,6
2,5 250 2,55 8,6 4,9 2,61 3,27 3,92 4,58 5,23 5,88 6,54 7,84 10,5
63§
3,5 350 3,57 9,2 5,5 3,08 3,85 4,62 5,39 6,16 6,93 7,70 9,24 12,3
2,5 250 2,55 8,6 4,9 3,91 4,89 5,67 6,85 7,82 8,80 9,78 11,7 15,7
93§
3,5 350 3,57 9,2 5,5 4,62 5,77 6,93 8,08 9,23 10,4 11,5 13,9 18,5
§ Low flow
340 Series: 300-15 Omni ™ Adjustable-radius Nozzle Performance Chart

Pressure
Radius
Bar kPa Kg/cm2 meters 90° 112,5° 135° 157,7° 180° 202,5° 225° 270° 360°
Flow LPM (at designated arcs)
4,5 2,87 3,57 4,30 5,02 5,74 6,45 7,17 8,61 11,5
5,0 3,25 4,05 4,88 5,70 6,51 7,32 8,14 9,76 13,0
6,0 3,96 4,93 5,94 6,93 7,92 8,91 9,90 11,9 15,7
2,5 250 2,55
7,0 4,57 5,68 6,85 7,99 9,13 10,3 11,4 13,7 18,3
8,0 5,16 6,42 7,74 9,03 10,3 11,6 12,9 15,5 20,6
8,5 5,70 7,09 8,55 9,97 11,4 12,8 14,2 17,1 22,8
5,5 3,55 4,41 5,32 6,21 7,10 8,00 8,87 10,6 14,2
6,0 3,91 4,87 8,87 6,85 7,83 8,81 9,78 11,7 15,7
7,0 4,65 5,79 6,97 8,14 9,30 10,5 11,6 14,0 18,6
3,5 350 3,57
8,0 5,40 6,71 8,09 9,44 10,8 11,1 13,5 16,2 21,6
9,0 6,38 7,94 9,57 11,2 12,8 14,4 16,0 19,2 25,5
10,0 7,11 8,85 10,7 12,4 14,2 16,0 17,8 21,3 28,4
§ Low flow.
TS90TP Nozzle Performance Data—Metric

Nozzle Set 3,4 bar 4,1 bar 4,8 bar 5,5 bar 6,2 bar 6,9 bar
Stator Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow
Number Main/Intermediate (m) (LPM) (m) (LPM) (m) (LPM) (m) (LPM) (m) (LPM) (m) (LPM)
1 Yellow/Blue 16,2 53 16,5 58 16,8 62 16,8 66 16,5 70 17,1 74

2 Blue/Red 102-1939 16,8 71 18,0 78 18,6 84 18,0 89 18,0 95 18,9 100
3 Brown/Orange Yellow - - 17,4 86 18,3 93 18,6 99 19,2 105 20,7 110
4 Orange/Orange - - - - 22,6 124 24,4 133 24,7 140 25,0 147
5 Green/Blue - - - - - - 24,1 143 25,0 151 25,6 158
6 Gray/Blue 102-1940 - - - - - - 25,0 150 26,2 159 26,5 167
7 Black/Orange White - - - - - - 24,4 165 26,5 175 25,6 184
8 Red/Blue - - - - - - 26,2 184 26,8 195 26,8 205
102-1941
9 Beige/Blue - - - - - - 25,9 208 27,7 221 29,0 233
White
171
Rotors Metric Data
Super 800 Performance Data T5 Performance Data—Metric T-5 Low Angle Nozzle Performance Data-Bar l
Nozzle Bar LPM Radius Pres- Radius Flow Flow Precip. Precip. Pres- Radius Flow Flow Precip. Precip.
2,0 1,1 8,5 Nozzle sure Nozzle sure
Bar m. m³/hr l/m (mm/hr) (mm/hr) Bar m. m³/hr l/m (mm/hr) (mm/hr)
3,0 1,5 8,8
.50 3,5 1,9 8,8
1,7 10,10 0,25 4,2 5 6 1,7 7,60 0,17 3,0 6 7
2,0 10,20 0,28 4,8 5 6 2,0 8,00 0,18 3,0 6 6
4,0 2,3 9,1 2,5 8,60 0,20 3,6 5 6
2,5 10,40 0,31 5,4 6 7
2,0 1,9 8,8 1.5 3,0 10,60 0,34 6,0 6 7 1.0 LA 3,0 8,80 0,22 3,6 6 7
3,0 2,3 9,1 3,5 10,70 0,37 6,0 7 8 3,5 8,80 0,24 4,2 6 7
.75 3,5 2,7 9,4 4,0 10,60 0,40 6,6 7 8 4,0 8,80 0,26 4,2 7 8
4,0 3,0 9,8 4,5 10,40 0,42 7,2 8 9 4,5 8,80 0,27 4,8 7 8
2,0 4,9 9,8 1,7 10,70 0,34 5,4 6 7 1,7 8,20 0,26 4,2 8 9
3,0 5,7 10,1 2,0 10,80 0,36 6,0 6 7 2,0 8,60 0,28 4,8 8 9
1.0 3,5 6,5 10,4 2,5 11,00 0,41 6,6 7 8 2,5 9,20 0,32 5,4 8 9
4,0 7,2 10,7 2.0 3,0 11,20 0,45 7,8 7 8 1.5 LA 3,0 9,40 0,35 6,0 8 9
2,0 7,6 10,1 3,5 11,30 0,49 8,4 8 9 3,5 9,40 0,38 6,6 9 10
3,0 9,1 10,4 4,0 11,10 0,42 9,0 8 10 4,0 9,40 0,41 6,6 9 11
2.0 3,5 10,3 10,7 4,5 10,70 0,55 9,0 10 11 4,5 9,40 0,44 7,2 10 11
4,0 11,4 11,0 1,7 10,70 0,41 6,6 7 8 1,7 8,80 0,33 5,4 9 10
2,0 10,90 0,44 7,2 7 8 2,0 9,10 0,36 6,0 9 10
2,0 7,6 10,1
2,5 11,30 0,50 8,4 8 9 2,5 9,50 0,41 6,6 9 10
3,0 9,1 10,4
2.5 3,5 10,3 10,7
2.5 3,0 11,30 0,56 9,6 9 10 2.0 LA 3,0 9,70 0,45 7,8 10 11
3,5 11,30 0,60 10,2 9 11 3,5 9,90 0,49 8,4 10 11
4,0 11,4 11,0 4,0 10,10 0,52 9,0 10 12
4,0 11,30 0,64 10,8 10 12
2,0 12,2 10,7 4,5 11,30 0,68 11,4 11 12 4,5 10,10 0,56 9,0 11 13
3,0 14,1 11,0 1,7 11,00 0,51 8,4 8 10 1,7 8,80 0,51 8,4 13 15
3.0 3,5 16,3 11,3 2,0 11,20 0,55 9,0 9 10 2,0 9,30 0,55 9,0 13 15
4,0 18,2 11,6 2,5 11,20 0,62 10,2 9 11 2,5 10,10 0,62 10,2 12 14
2,0 15,2 11,0 3.0 3,0 12,10 0,69 11,4 9 11 3.0 LA 3,0 10,60 0,68 11,4 12 14
3,0 18,6 11,3 3,5 12,20 0,74 12,6 10 12 3,5 10,80 0,74 12,6 3 15
4.0 3,5 21,3 11,6 4,0 12,20 0,80 13,2 11 12 4,0 11,00 0,80 13,2 13 15
4,0 23,6 11,9 4,5 12,20 0,84 13,8 11 13 4,5 11,00 0,84 13,8 14 16
2,0 20,5 11,3 1,7 11,30 0,66 10,8 10 12
3,0 24,3 11,9 2,0 11,60 0,71 12,0 11 12
6.0 3,5 27,7 12,5 2,5 12,30 0,81 13,2 11 13 1. Precipitation rates based on half-circle operation
4,0 30,8 13,1 4.0 3,0 12,70 0,89 15,0 11 13
2. square spacing based on 50% diameter of throw
2,0 25,8 11,6 3,5 12,80 0,97 16,2 12 14
4,0 12,80 1,04 17,4 13 15 3. triangular spacing based on 50% diameter of throw
3,0 31,2 12,2
8.0 3,5 36,1 12,8
4,5 12,80 1,10 18,0 13 15
1,7 11,90 0,84 13,8 12 14
4,0 40,3 13,4
2,0 12,10 0,91 15, 12 14
2,5 12,70 1,03 17,4 13 15
Radius shown in meters. Data based
on 360°. 5.0 3,0 13,50 1,13 18,6 12 14
3,5 13,70 1,23 20,4 13 15
4,0 13,70 1,32 22,2 14 16
Super 800 Low-angle Nozzle 4,5 13,70 1,40 23,4 15 17
1,7 11,90 0,97 16,2 14 16
Performance Datal
2,0 12,40 1,05 17,4 14 16
Nozzle Bar LPM Radius 2,5 13,20 1,21 20,4 14 16
2,0 4,2 8,5 6.0 3,0 13,90 1,34 22,2 14 16
3,0 4,9 8,8 3,5 14,20 1,45 24,0 14 17
1.0 3,5 5,7 9,1 4,0 14,90 1,55 25,8 15 17
4,0 6,5 9,4 4,5 14,60 1,64 28,2 15 18
2,0 8,7 9,1 1,7 11,00 1,34 22,2 22 26
3,0 10,6 10,1 2,0 11,80 1,45 24,0 21 24
3.0 3,5 11,8 10,7 2,5 13,30 1,63 27,0 19 21
4,0 12,9 11,3 8.0 3,0 14,10 1,79 30,0 18 21
2,0 14,4 9,4 3,5 14,90 1,93 32,4 18 20
3,0 17,1 10,4 4,0 15,20 2,06 34,2 18 21
4.0 3,5 19,4 11,3 4,5 15,20 2,19 36,6 19 22
4,0 21,3 11,9
2,0 18,6 9,8
3,0 22,0 10,7
6.0 3,5 24,7 11,9
4,0 27,4 9,4
Radius shown in meters. Data based
on 360°.
172
Rotors Metric Data
TR50XT Performance Data

5° 15° 25°
Nozzle
Bar Flow Precip. Rate* Precip. Rate* Precip. Rate*
Size Radius Radius Radius
▲ ■ ▲ ■ ▲ ■
2,0 3,8 6,1 7,0 6,1 7,9 4,2 3,6 9,1 3,1 2,7
2,5 4,1 6,3 7,1 6,2 8,0 4,4 3,8 9,1 3,4 2,9
1.0 3,0 4,5 6,5 7,3 6,3 8,1 4,7 4,0 9,2 3,6 3,2
3,5 4,9 6,8 7,4 6,4 8,3 5,0 4,3 9,3 3,9 3,4
Yellow 4,0 5,3 7,3 6,8 5,9 8,5 5,1 4,4 9,3 4,2 3,7
4,5 5,6 7,5 7,0 6,0 8,5 5,3 4,6 9,3 4,5 3,9
5,0 6,0 7,5 7,3 6,3 8,6 5,6 4,9 9,3 4,7 4,1
2,0 4,7 8,5 4,5 3,9 9,1 3,9 3,4 10,4 3,0 2,6
2,5 5,1 8,6 4,7 4,1 9,3 4,0 3,5 10,6 3,2 2,7
1.5 3,0 5,5 8,7 5,0 4,4 9,5 4,3 3,7 10,7 3,3 2,9
3,5 6,0 8,9 5,3 4,6 9,6 4,5 3,9 10,8 3,5 3,1
Orange 4,0 6,5 9,2 5,3 4,6 9,7 4,7 4,1 10,8 3,8 3,3
4,5 6,9 9,4 5,4 4,7 9,8 5,0 4,3 10,7 4,1 3,6
5,0 7,3 9,5 5,6 4,8 9,8 5,3 4,6 10,7 4,4 3,8
2,0 6,3 9,4 4,9 4,2 9,8 4,6 4,0 11,0 3,6 3,1
2,5 6,8 9,4 5,3 4,6 10,1 4,6 4,0 11,3 3,7 3,2
2 3,0 7,5 9,5 5,7 5,0 10,5 4,7 4,1 11,5 3,9 3,4
3,5 8,2 9,6 6,1 5,3 10,7 5,0 4,3 11,6 4,2 3,7
Red 4,0 8,9 9,8 6,3 5,5 10,9 5,1 4,5 11,7 4,5 3,9
4,5 9,5 10,0 6,6 5,7 11,0 5,4 4,7 11,7 4,8 4,1
5,0 10,0 10,1 6,8 5,9 11,0 5,7 4,9 11,8 5,0 4,3
2,0 8,9 9,4 6,9 5,9 10,4 5,7 4,9 11,6 4,6 4,0
2,5 9,6 9,4 7,4 6,4 10,5 6,0 5,2 11,9 4,7 4,1
3 3,0 10,5 9,7 7,7 6,7 10,7 6,3 5,5 12,2 4,9 4,2
3,5 11,4 10,1 7,7 6,7 11,0 6,5 5,6 12,5 5,0 4,4
Black 4,0 12,3 10,4 7,8 6,8 11,3 6,6 5,7 12,6 5,3 4,6
4,5 13,0 10,6 8,0 7,0 11,6 6,7 5,8 13,0 5,4 4,6
5,0 13,8 10.7 8,3 7,2 11,8 6,9 5,9 13,3 5,4 4,7
2,0 13,6 9,4 10,5 9,1 10,4 8,8 7,6 11,9 6,7 5,8
2,5 14,7 9,6 11,0 9,5 10,5 9,3 8,1 12,1 7,0 6,0
4.5 3,0 16,1 10,0 11,2 9,7 10,7 9,7 8,4 12,3 7,4 6,4
3,5 17,7 10,4 11,4 9,8 11,2 9,8 8,5 12,5 7,8 6,8
Blue 4,0 19,0 10,5 12,0 10,4 11,5 10,0 8,6 12,7 8,1 7,0
4,5 20,3 10,8 12,1 10,5 11,7 10,2 8,8 12,8 8,6 7,4
5,0 21,4 11,0 12,2 10,6 11,9 10,4 9,0 12,8 9,0 7,8
2,0 16,7 9,4 12,9 11,2 10,7 10,1 8,8 12,5 7,4 6,4
2,5 18,0 9,5 13,7 11,9 11,0 10,4 9,0 12,6 7,9 6,8
6 3,0 19,8 9,9 13,9 12,0 11,5 10,3 9,0 12,8 8,3 7,2
3,5 21,6 10,6 13,4 11,6 12,2 10,1 8,7 13,1 8,7 7,5
Green 4,0 23,3 11,1 13,0 11,3 12,2 10,8 9,4 13,1 9,4 8,1
4,5 24,8 11,4 13,3 11,5 12,4 11,3 9,8 13,3 9,6 8,4
5,0 26,1 11,5 13,7 11,8 12,5 11,5 10,0 13,6 9,8 8,5
2,0 18,6 10,4 12,0 10,4 10,7 11,3 9,8 12,5 8,2 7,1
2,5 20,1 10,6 12,3 10,6 10,9 11,8 10,2 12,5 8,9 7,7
7.5 3,0 21,9 10,8 13,0 11,2 11,0 12,5 10,8 12,5 9,6 8,3
3,5 23,8 10,8 14,1 12,2 11,1 13,3 11,5 12,7 10,3 8,9
Brown 4,0 25,7 10,9 14,9 12,9 11,4 13,8 11,9 12,8 10,9 9,4
4,5 27,4 11,1 15,5 13,5 11,5 14,3 12,4 13,0 11,3 9,8
5,0 28,9 11,2 16,0 13,9 11,6 14,8 12,8 13,1 11,6 10,0
2,0 23,1 10,4 14,8 12,9 10,4 14,8 12,9 12,8 9,7 8,4
2,5 25,2 10,6 15,7 13,6 10,5 15,9 13,8 12,8 10,6 9,2
9 3,0 27,8 10,7 16,9 14,6 10,8 16,6 14,3 13,0 11,4 9,8
3,5 30,5 10,7 18,5 16,1 11,3 16,5 14,3 13,4 11,7 10,1
Gray 4,0 32,9 10,7 20,0 17,3 11,6 16,8 14,5 13,5 12,4 10,8
4,5 35,4 10,9 20,6 17,8 12,0 17,1 14,8 13,9 12,7 11,0
5,0 17,5 11,2 20,8 18,0 12,2 17,4 15,0 14,2 12,9 11,1
* ▲ Precipitation rates are for triangular spacing, shown in
millimeters per hour, calculated at 50% of diameter.
■ Precipitation rates are for square spacing, shown in
millimeters per hour, calculated at
50% of diameter.
All performance specifications are based on the stated
working pressure available at the base of
the sprinkler.
Radius can be reduced 25% with breakup screw.
Performance rating is based on a zero
wind condition.
173
Rotors Metric Data
TR70XT Performance Data—Metric T7 Sports Rotor Nozzle Performance Data
Nozzle Pressure Radius Precip ■ Layout Precip ▲ Layout
LPM Flow
Size Bar kPa Kg/cm2 5° 15° 25° Press. Rad. Rate Rate
3,0 300 3,06 25,9 10,5 12,2 13,6 Nozzle Rate SC SC
(Bar) (m) (mm/ CU DU (mm/ CU DU
3,5 350 3,57 27,1 11,3 12,8 14,0 (lpm) 5% 5%
hr) ■ hr) ▲
4,0 400 4,08 29,0 11,5 13,0 14,3
7 4,5 450 4,59 30,7 11,9 13,3 14,5 2.8 14.1 25.8 15.737 76.3% 59.3% 1.8 18.172 79.3% 67.3% 1.5
5,0 500 5,10 32,5 12,3 13,5 14,7 3.4 14.8 28.1 16.418 82.7% 73.7% 1.3 18.958 89.7% 88.0% 1.1
Orange 5,5 550 5,61 34,4 12,5 13,7 14,9
4.1 14.9 30.7 17.199 82.0% 75.3% 1.3 19.860 91.3% 87.3% 1.1
6,0 600 6,12 35,5 12,7 13,3 15,1
6,5 650 6,63 37,7 12,9 13,6 15,4 7.0 4.8 15.3 33.7 18.134 82.7% 76.3% 1.3 20.940 91.0% 85.7% 1.2
7,0 700 7,14 40,4 13,2 14,4 15,6 5.5 15.8 36.6 18.188 82.0% 76.0% 1.3 21.002 90.3% 83.0% 1.3
3,0 300 3,06 28,1 10,5 12,2 13,9
6.2 15.8 38.9 18.580 81.0% 75.0% 1.4 21.455 89.0% 80.3% 1.3
3,5 350 3,57 30,5 11,3 12,8 14,3
4,0 400 4,08 32,4 11,5 13,0 14,6 6.9 16.3 41.1 18.197 82.0% 75.3% 1.4 21.013 88.0% 77.0% 1.4
9 4,5 450 4,59 34,1 11,6 13,3 14,8 2.8 14.4 28.5 16.698 74.0% 52.7% 2.3 19.282 69.7% 60.0% 1.9
5,0 500 5,10 35,6 11,7 13,5 15,0
3.4 15.4 31.2 16.137 80.7% 66.0% 1.7 18.634 82.3% 77.0% 1.4
Red 5,5 550 5,61 36,7 12,2 13,7 15,2
6,0 600 6,12 39,9 12,6 14,1 15,5 4.1 15.3 33.7 16.758 77.7% 70.3% 1.4 19.351 90.0% 86.0% 1.2
6,5 650 6,63 42,4 12,9 14,3 15,5 9.0 4.8 15.8 37.1 17.748 78.7% 71.0% 1.4 20.494 91.0% 87.7% 1.1
7,0 700 7,14 44,2 13,2 14,4 15,6
5.5 16.4 39.7 17.604 79.7% 75.7% 1.3 20.328 92.0% 84.0% 1.3
3,0 300 3,06 39,0 10,5 12,3 14,0
3,5 350 3,57 43,4 11,3 13,1 14,7 6.2 16.3 42.4 18.113 79.3% 74.0% 1.4 20.915 91.0% 81.7% 1.4
4,0 400 4,08 46,2 11,5 13,3 15,1 6.9 16.5 44.8 18.454 78.3% 71.7% 1.4 21.310 89.0% 78.3% 1.5
12* 4,5 450 4,59 48,9 11,7 13,6 15,4
5,0 500 5,10 51,5 12,0 13,8 15,6 2.8 15.3 37.7 19.470 73.7% 59.0% 2.0 22.483 73.0% 61.0% 1.9
Black 5,5 550 5,61 53,7 12,2 14,0 15,8 3.4 16.3 39.9 19.849 85.7% 75.0% 1.4 22.920 86.0% 80.0% 1.3
6,0 600 6,12 56,4 12,6 14,4 16,1 4.1 17.3 43.6 20.080 86.0% 78.7% 1.3 23.187 87.7% 83.3% 1.2
6,5 650 6,63 58,8 12,9 14,6 16,2
7,0 700 7,14 60,8 13,2 14,7 16,5 12.0 4.8 18.0 47.5 21.038 86.3% 80.0% 1.2 24.293 90.3% 85.3% 1.2
3,0 300 3,06 50,4 10,8 12,7 14,7 5.5 18.2 51.1 21.843 86.0% 80.3% 1.2 25.223 90.7% 85.3% 1.1
3,5 350 3,57 55,3 11,7 13,8 15,9 6.2 18.5 54.4 22.432 86.3% 80.3% 1.2 25.903 90.7% 85.0% 1.1
4,0 400 4,08 59,4 12,6 14,7 16,6
16 4,5 450 4,59 63,3 13,1 15,3 17,2 6.9 19.2 57.5 22.862 86.3% 79.7% 1.2 26.399 91.0% 86.0% 1.1
5,0 500 5,10 66,7 13,6 15,7 17,7 2.8 16.0 50.8 23.366 68.3% 48.0% 2.5 26.981 68.3% 55.0% 2.1
Blue 5,5 550 5,61 69,2 14,3 16,1 17,7 3.4 17.4 56.6 23.332 81.3% 64.7% 1.8 26.942 78.3% 68.0% 1.6
6,0 600 6,12 72,7 14,5 16,4 17,9
6,5 650 6,63 75,6 14,9 16,6 18,1 4.1 18.3 59.8 22.962 84.0% 73.0% 1.4 26.515 85.7% 84.0% 1.2
7,0 700 7,14 77,9 15,3 16,8 18,3 16.0 4.8 18.6 64.8 24.069 83.7% 76.0% 1.3 27.793 88.7% 85.0% 1.1
3,0 300 3,06 55,9 10,8 13,0 15,0
5.5 19.4 69.7 24.199 82.7% 76.3% 1.3 27.944 90.0% 85.0% 1.2
3,5 350 3,57 61,8 11,7 14,1 16,3
4,0 400 4,08 66,5 12,6 15,0 17,4 6.2 19.6 74.3 24.990 82.3% 74.3% 1.4 28.857 90.0% 83.7% 1.2
20 4,5 450 4,59 70,5 13,8 16,0 18,2 6.9 20.0 78.7 25.637 83.7% 75.3% 1.4 29.604 89.0% 80.7% 1.3
5,0 500 5,10 74,4 14,7 16,8 18,7
2.8 15.8 61.0 28.045 67.0% 48.7% 2.0 32.384 72.0% 62.3% 1.9
Green 5,5 550 5,61 78,2 14,9 17,1 19,2
6,0 600 6,12 81,5 15,4 17,1 19,4 3.4 17.5 69.7 26.758 76.0% 61.7% 1.6 30.898 82.0% 79.0% 1.3
6,5 650 6,63 84,5 15,5 17,3 19,6 4.1 18.6 74.1 26.585 82.7% 73.0% 1.3 30.698 84.3% 79.7% 1.2
7,0 700 7,14 87,1 15,6 18,2 19,9
20.0 4.8 19.4 79.5 27.622 83.3% 77.7% 1.2 31.896 87.7% 82.0% 1.2
3,0 300 3,06 57,9 11,3 13,2 15,2
3,5 350 3,57 62,4 12,6 14,7 16,8 5.5 20.2 85.5 26.141 84.0% 76.3% 1.3 30.186 87.7% 81.0% 1.2
4,0 400 4,08 66,0 13,7 15,6 17,5 6.2 20.7 90.8 26.946 82.7% 74.0% 1.4 31.115 87.7% 80.7% 1.2
24 4,5 450 4,59 69,4 14,5 16,3 18,2
6.9 21.4 95.7 27.561 82.7% 74.3% 1.3 31.825 87.0% 80.3% 1.2
5,0 500 5,10 72,8 15,0 16,8 18,7
5,5 550 5,61 76,7 15,2 17,1 18,9 2.8 16.4 58.5 27.970 77.0% 59.0% 2.1 32.298 70.7% 63.0% 1.7
Brown
6,0 600 6,12 80,3 16,1 17,9 19,5 3.4 18.4 67.0 24.034 72.3% 57.7% 1.8 27.753 82.7% 79.0% 1.2
6,5 650 6,63 83,7 16,7 18,5 20,1
7,0 700 7,14 86,7 17,1 4.1 19.4 74.8 24.351 77.0% 65.0% 1.6 28.119 86.0% 82.7% 1.2
19,0 20,5
3,0 300 3,06 66,2 10,8 13,1 15,5 24.0 4.8 20.2 81.8 25.026 78.3% 69.0% 1.4 28.898 89.0% 84.0% 1.1
3,5 350 3,57 72,4 11,7 14,4 17,2 5.5 20.8 88.2 25.381 79.7% 72.0% 1.4 29.308 88.0% 81.0% 1.2
4,0 400 4,08 77,7 12,8 15,5 18,0
27 4,5 450 4,59 82,7 14,1 16,5 18,8 6.2 21.3 94.2 26.315 80.3% 72.7% 1.4 30.387 88.7% 81.7% 1.2
5,0 500 5,10 87,3 15,2 17,3 19,4 6.9 22.0 99.6 25.523 79.3% 70.0% 1.6 29.472 87.3% 76.7% 1.4
Gray 5,5 550 5,61 91,4 15,8 18,0 19,8 2.8 16.8 73.3 31.320 58.7% 30.7% 4.6 36.166 47.7% 39.0% 2.9
6,0 600 6,12 95,3 16,5 18,6 20,7
6,5 650 6,63 99,1 17,0 19,2 21,3 3.4 19.6 83.2 25.446 64.0% 48.7% 2.3 29.384 70.7% 64.3% 1.6
7,0 700 7,14 102,9 17,4 19,6 21,7 4.1 21.6 90.2 23.119 67.3% 52.0% 1.9 26.697 81.7% 77.0% 1.2
All performance specifications are based on the stated 27.0 4.8 22.0 97.2 24.227 73.0% 58.0% 1.7 27.976 84.7% 82.3% 1.2
working pressure available at the base of the sprinkler.
5.5 22.3 103.5 25.098 71.7% 58.7% 1.8 28.982 86.3% 81.0% 1.3
#12 nozzle comes pre-installed from factory. 6.2 22.7 109.9 25.937 71.0% 61.0% 1.6 29.951 90.0% 82.3% 1.4
6.9 22.9 115.5 26.546 71.7% 62.3% 1.8 30.654 87.0% 76.7% 1.5
690 Series Performance Chart * Pre-installed nozzle

Data based on 180°
Base Pressure Nozzle Set 90 Nozzle Set 91 Nozzle Set 92
Bar Radius LPM Radius LPM Radius LPM
.038 26,5 193 29,2 232 30,5 280
.047 27,4 216 30,5 279 33,0 311
Radius shown in meters.
Sprinkler radius of throw per ASAE standard S398.1.
174
Rotors Metric Data
TG101-NPT Performance Data — 24° Trajectory—Metric

Nozzle 12mm Nozzle 14mm Nozzle 16mm Nozzle 18mm Nozzle 20mm Nozzle 22mm Nozzle 24mm
Pressure
Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius Flow Radius
bar
m³/h l/s m m³/h l/s m m³/h l/s m m³/h l/s m m³/h l/s m m³/h l/s m m³/h l/s m
2,0 10,6 2,96 26,0 13,9 3,86 27,9 17,6 4,89 29,7 29,7 6,04 31,5 26,3 7,30 33,1 31,3 8,69 34,7
2,5 11,9 3,31 28,3 15,5 4,32 30,4 19,7 5,47 32,4 24,3 6,75 34,3 29,4 8,17 36,1 35,0 9,72 37,8
3,0 9,6 2,66 27,9 13,0 3,62 30,3 17,0 4,73 32,6 21,6 5,99 34,7 25,6 7,39 36,7 32,2 8,95 38,7 38,3 10,65 40,5
3,5 10,4 2,87 29,5 14,1 3,91 32,1 18,4 5,11 34,5 23,3 6,47 36,8 28,7 7,99 38,9 34,8 9,66 41,0 41,4 11,50 43,0
4,0 11,1 3,07 31,1 15,1 4,18 33,8 19,7 5,46 36,3 24.9 6,91 38,7 30,7 8,54 41,0 37,2 10,33 43,1 44,3 12,29 45,2
4,5 11,7 3,26 32,5 16,0 4,44 35,3 20,9 5,80 38,0 26,4 7,33 40.5 32,6 9,05 42,8 39,4 10,96 45,1 46,9 13,04 47,3
5,0 12,4 3,44 33,8 16,8 4,68 36,8 22,0 6,11 39,5 27,8 7,73 42,1 34,4 9,54 44,6 41,6 11,55 46,9 49,5 13,74 49,2
5,5 13,0 3,60 35,1 17,7 4,91 38,1 23,1 6,41 41,0 29,2 8,11 43,7 36,0 10,01 46,2 43,6 12,11 48,7 51,9 14,42 51,0
6,0 13,6 3,76 36,3 18,4 5,12 39,4 24,1 6,69 42,4 30,5 8,47 45,1 37,6 10,46 47,8 45,5 12,65 50,3 54,2 15,06 52,7
6,5 14,1 3,92 37,4 19,2 5,33 40,6 25,1 6,96 43,6 31,7 8,81 46,5 39,2 10,88 49,3 47,4 13,17 51,9 56,4 15,67 54,4
Note: Products may not be available in all regions. Please consult your Toro regional manager for availability.
640 Series Performance Data Mini 8 Performance Data—Metric

Base Pressure Precip. Rate* Prec. Rate
Nozzle LPM Radius Nozzle bar LPM Radius
Bar kPa kg/cm2 ▲ ■ ▲ ■
3,0 300 3,06 23,6 14,6 7,7 6,6 2,0 3,0 6,1 5,6 4,8
3,5 350 3,57 25,5 15,3 7,5 6,5 2,5 3,3 6,3 5,8 5,0
4,0 400 4,08 27,2 15,7 7,6 6,6 .75 3,0 3,8 6,5 6,2 5,4
40 4,5 450 4,59 29,0 16,0 7,8 6,8 3,5 4,6 6,7 7,1 6,1
5,0 500 5,10 30,9 16,2 8,1 7,1 2,0 4,2 7,9 4,7 4,0
5,5 550 5,61 32,5 16,5 8,3 7,2 2,5 4,6 8,1 4,8 4,2
6,0 600 6,12 34,1 16,7 8,5 7,3
1.0 3,0 5,2 8,3 5,2 4,5
3,0 300 3,06 36,9 15,2 11,0 9,6 3,5 5,7 8,6 5,3 4,6
3,5 350 3,57 38,8 16,2 10,2 9,6 2,0 4,5 8,8 4,0 3,5
2,5 5,0 9,0 4,3 3,7
4,0 400 4,08 41,0 16,4 10,5 9,1 1.5 3,0 5,6 9,3 4,5 3,9
41 4,5 450 4,59 43,4 16,6 10,9 9,4
3,5 6,1 9,5 4,7 4,0
5,0 500 5,10 45,8 16,8 11,2 9,7
2,0 5,3 9,1 4,4 3,8
5,5 550 5,61 48,0 17,1 11,4 9,8
2,5 6,0 9,3 4,8 4,2
6,0 600 6,12 49,9 17,3 11,5 10,0 2.0 3,0 6,8 9,4 5,3 4,6
3,0 300 3,06 46,6 16,2 12,3 10,6 3,5 7,7 9,4 6,0 5,2
3,5 350 3,57 49,1 16,8 12,0 10,4 2,0 8,7 10,3 5,7 4,9
4,0 400 4,08 52,2 17,0 12,5 10,8 2,5 9,4 10,6 5,8 5,0
42 4,5 450 4,59 54,4 17,2 12,7 11,0 3.0 3,0 10,4 10,7 6,3 5,4
5,0 500 5,10 56,7 17,5 12,8 11,1 3,5 11,5 10,7 6,9 6,0
5,5 550 5,61 59,7 17,7 13,2 11,4 Radius shown in meters.
6,0 600 6,12 62,5 17,7 13,8 11,9
3,0 300 3,06 51,7 17,4 11,8 10,2
3,5 350 3,57 55,2 18,0 11,8 10,2
4,0 400 4,08 58,5 18,0 12,5 10,8
43 4,5 450 4,59 62,0 18,3 12,8 11,1
5,0 500 5,10 65,6 18,7 13,0 11,2
5,5 550 5,61 69,1 19,2 13,0 11,2
6,0 600 6,12 72,2 19,4 13,3 11,5
3,0 300 3,06 65,7 17,3 15,2 13,1
3,5 350 3,57 70,8 18,3 14,6 12,7
4,0 400 4,08 74,3 18,5 15,0 13,0
44 4,5 450 4,59 79,3 18,9 15,4 13,3
5,0 500 5,10 84,3 19,4 15,5 13,4
5,5 550 5,61 88,4 19,8 15,6 13,5
6,0 600 6,12 92,8 20,2 15,7 13,6
175
Valves Metric Data
252 Series Friction Loss Data—Metric
LPM Flow
EZ-Flo® Friction Loss Data—Metric Size Type Config.
25 50 75 100 125 150 175 200 250 300 400 500 600 700
LPM Flow 40mm Hydraulic Globe 0,07 0,09 0,14 0,18 0,23 0,34 0,44 0,78 1,06
Size Model (11⁄2") Angle 0,07 0,08 0,10 0,10 0,13 0,25 0,34 0,56 0,93
1 19 38 57 76 114
50mm Hydraulic Globe 0,14 0,17 0,27 0,43 0,61 0,79
25mm (1") Inline 0,14 0,24 0,28 0,31 0,32 0,43 (2") Angle 0,07 0,13 0,23 0,30 0,37 0,52
25mm Electric Globe 0,2 0,30 0,34 0,42 0,53 0,65
25mm (1") Anti-siphon 0,14 0,14 0,31 0,16 0,26 0,56 (1") Angle 0,2 0,26 0,31 0,32 0,40 0,51
20mm ( ⁄4")
3 40mm Globe 0,10 0,11 0,14 0,18 0,23 0,32 0,47 0,84 1,20
Anti-siphon 0,14 0,29 0,29 0,33 0,52 –– Electric
(11⁄2") Angle 0,09 0,08 0,10 0,12 0,16 0,21 0,33 0,52 0,70
50mm Electric Globe 0,14 0,17 0,28 0,45 0,61 0,79
(2") Angle 0,07 0,13 0,23 0,30 0,37 0,52
250/260 Series Friction Loss Data—Metric TPV Friction Loss Data—Metric

LPM Flow LPM Flow ,38 ,94 18,9 37,8 56,8 75,7 113,6 151,4 189,3
Size Model
20 40 60 80 100 125 150
1" (25mm) Hydraulic <0,1 0,1 0,1 0,2 0,3 0,5 0,6 Bar Loss ,14 ,14 ,24 ,27 ,21 ,23 ,48 ,90 1,34
1" (25mm) Electric 0,3 0,3 0,3 0,4 0,5 0,6
254/264 Series Friction Loss Data—Metric Quick Coupler Series Friction Loss Data—Metric
LPM Flow Model LPM Flow
Size Model Number 35 50 75 100 125 150 175 225 275 325 375
2 25 50 75 100 125 150 175
075-SLSC 0,1 0,2 0,4 0,6
20mm ( ⁄4") Electric
3
<1,0 0,1 0,4 0,7
100-2SLLC 0,1 0,2 0,3 0,5
25mm (1") Electric 0,1 0,2 0,2 0,3 0,4 0,6 0,8
P-220S Series Friction Loss Data—Metric

GPM Flow
Size Config.
80 90 100 110 120 130 140 150 180 200 225 250 275 300
Globe 3.87 4.29 4.41 6.50 7.78 9.30 9.94 12.15
2"
Angle 2.79 3.58 5.69 5.62 6.4 7.35 8.95 9.94
Globe 2.65 3.40 5.10 5.98 6.70 7.73 11.05
3"
Angle 2.10 2.65 4.65 4.30 5.54 6.98 9.95
220 Brass Series Friction Loss Data—Metric

LPM Flow
Model Type
25 50 75 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
25mm (1") Electric 0,15 0,13 0,17 0,31 0,41 0,48
32mm (11⁄4") Electric 0,38 0,42 0,47 0,51 0,56 0,61 0,88 1,03
40mm (11⁄2") Electric 0,32 0,33 0,36 0,37 0,42 0,47 0,55 0,64 0,79 1,02
50mm (2") Electric 0,09 0,14 0,15 0,19 0,24 0,35 0,44 0,51 0,59 0,75 1,00
65mm (21⁄2") Electric 0,15 0,16 0,16 0,17 0,17 0,19 0,24 0,33 0,40 0,46
75mm (3") Electric 0,16 0,16 0,17 0,17 0,19 0,24 0,33 0,40 0,43 0,46 0,49 0,53
P-220 Series Friction Loss Data*—Metric

LPM Flow
Size Configuration
40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 700 800 900 1000 1100
25mm Globe 0,29 0,25 0,25 0,26 0,32 0,43 0,55 0,69 0,82
(1") Angle 0,29 0,35 0,21 0,20 0,21 0,29 0,38 0,49 0,61
40mm Globe 0,12 0,14 0,18 0,23 0,28 0,43 0,62 0,85 1,11
(1 ⁄2")
1 Angle 0,09 0,10 0,13 0,17 0,22 0,34 0,48 0,65 0,85
50mm Globe 0,14 0,20 0,25 0,32 0,40 0,48 0,54
(2") Angle 0,08 0,12 0,15 0,19 0,24 0,29 0,32
75mm Globe 0,18 0,24 0,32 0,41 0,52 0,65
(3") Angle 0,14 0,19 0,26 0,34 0,43 0,54
Flow rates are recommended not to exceed 0,3 bar loss.
Values shown in bar.
For kPa values, multiply tabular values by 100. For Kg/cm2 values, multiply tabular values by 1,02.
* Data taken with EZReg pressure regulation device installed. Data remains the same with or without pressure regulation.
176
Landscape Drip Metric Data
DL2000 Performance Table—Metric Inlet Pressure VS Maximum

5/8” (16mm) OD
Length of Run In Meters
Flow Rate 2.0/4.0 lph
Coefficient of Variation (Cv) ≤ 5% Flow Rate Emitter 1,03 1,72 2,07 2,76
Part No.
(LPH) Spacing bar bari bar bar
Inside Diameter 15,75 mm RGP-212 2,0 LPH 30,5 cm 76m 110m 122m 140m
Outside Diameter 18,03 mm
RGP-218 2,0 LPH 45,7 cm 107m 157m 172m 198m
Wall 1,143 mm
Operating pressure (P) 1,03–4,13 Bar RGP-412 4,0 LPH 30,5 cm 49m 73m 79m 91m
Minimum filtration requirement 125 Micron
RGP-418 4,0 LPH 45,7 cm 73m 104m 114m 131m
Hazen-Williams C factor 140
Barb loss factor (Kd) .98
Soakerline Performance Table-Metric Soakerline Length of Run Chart

Inside Diameter 4,32 mm Emitter Inlet Max Length
Part Number Tubing Size Flow Rate
Spacing Pressure of Run
1/4” .53 GPH 6” 15 psi 19’
Wall 1,02 mm T-SDx252-6-100
(6,4mm) (2,0 LPH) (15,2mm) (1,03 bar) (5,8m)
Operating Pressure 1,03–4,13 Bar 1/4” .53 GPH 12” 15 psi 33’
Minimum Filtration Requirement 105 Micron T-SDx252-12-100
(6,4mm) (2,0 LPH) (30,5mm) (1,03 bar) (10m)
Nominal Flow Rate (Q) 2 lph
Turbo-SC Performance Table—Metric E-2 Emitter Performance Table—Metric

T-DPJ02-A T-DPJ04-A T-DPJ08-A T-DBK04 T-DBK08 T-DBK16
Nominal Flow Rate (Q) LPH 2,0 LPH 4,0 LPH 8,0 LPH LPH @
Nominal Flow Rate (Q) 4 LPH 8 LPH 16 LPH
1 Bar
Recom. Pressure Range (P) Bar 0,7–3,5 Bar Metric
Emitter Exponent (x) 0.02 -0.04 0.01 Flow Coefficient (K) 4,15 7,17 14,38
Units
Min. Filtration Requirement 140 Mesh (105 Micron) Operating Pressure Range (P) Bar 0–3,5 Bar
Color (Base) Blue Black Red Flow Exponent (X) 0.60 0.57 0.56
Coefficient of Variation (Cv) ≤ 5% ≤ 6% ≤ 6.5%
Minimum Filtration Requirement 140 Mesh (105 Micron)
Turbo-SC Flow Rate—Metric
Bar T-DPJ02-A T-DPJ08-A
E-2 Emitter Flow Rate—Metric
0,5 1,60 2,94 6,01
Bar T-DBK04 T-DBK08 T-DBK16
1,0 1,74 3,49 7,42
1,5 1,95 3,69 8,40 0,50 2,73 4,82 9,74
*2,0 1,90 3,77 8,02 *1,00 4,15 7,17 14,38

2,5 1,94 3,32 8,11 1,50 5,31 9,04 18,05
3,0 1,82 3,69 7,29 2,00 6,31 10,65 21,21
3,5 1,78 3,61 6,97
2,50 7,22 12,10 24,04
4,0 1,74 3,49
3,00 8,07 13,43 26,63
Values listed in liters per hour. 3,50 8,85 14,66 29,04
Values listed in gallons per hour.
DL2000 Microline Performance Table—Metric DL2000 Microline Length of Run Chart

Part Flow Emitter Inlet Maximum
Inside Diameter 4,32 mm Tubing Size
Number Rate Spacing Pressure Length of Run
Outside Diameter 6,35 mm 1/4” .53 gph 6” 15 psi 19’
T-MCRG-206
Wall 1,02 mm (2,0 LPH) (15,2mm) (1,03 bar) (5,8m)
Operating Pressure 1,03–4,13 Bar 1/4” .53 gph 12” 15 psi 33’
T-MCRG-212
(6,4mm) (2,0 LPH) (30,5mm) (1,03 bar) (10m)
Minimum Filtration Requirement 105 Micron
Nominal Flow Rate (Q) 2 lph
177
Landscape Drip Metric Data
NGE Performance Table—Metric NGE Flow Rates—Metric
T-DPC02 T-DPC04 T-DPC08 Pressure T-DPC02 T-DPC04 T-DPC08
Nominal Flow Rate (Q) LPH 2,0 LPH 4,0 LPH 8,0 LPH Bar lph lph lph
Recom. Pressure Range (P) Bar 0,6–4,1 Bar 0,41 1,76 3,44 6,56
Emitter Exponent (x) 0.000 0.000 0.002 0,55 1,93 3,84 7,37
Coefficient of Variation (Cv) 3% 0,69 2,00 4,10 7,98
1,03 2,00 4,16 8,35
Min. Filtration Requirement 140 Mesh (105 Micron)
1,38 2,02 4,08 8,23
Optional Outlet -MA (Male Adapter) -DC (Snap-on Dust Cap)
1,72 2,04 3,97 8,07
Color (Cap) Blue Black Red 2,07 2,06 3,94 8,02
2,41 2,08 3,94 8,01
2,76 2,09 3,94 8,04
3,10 2,08 3,95 8,11
3,45 2,07 3,96 8,17
3,79 2,06 3,97 8,24
4,14 2,03 3,97 8,27
Drip Zone Kits Flow vs. Friction Loss—Metric

Part Number LPM 1 19 30 57 76
Friction Loss (bar) 0,21 0,34 0,34 n/a n/a

DZK-EZF-075-LF
Minimum Inlet
2,01 2,21 2,21 2,34 2,69
Pressure (bar)
Friction Loss (bar) 0,21 0,34 0,34 0,48 0,90
DZK-2711-075-MF
Minimum Inlet
2,01 2,21 2,21 2,34 2,69
Pressure (bar)
DZK-TPV-1-LF
Minimum Inlet
2,01 2,21 2,21 2,21 2,41
Pressure (bar)
DZK-TPV-1-MF
Minimum Inlet
2,01 2,21 2,21 2,21 2,41
Pressure (bar)
DZK-700-1-LF
Minimum Inlet
2,01 2,21 2,21 2,21 2,41
Pressure (bar)
DZK-700-1-MF
Minimum Inlet
2,01 2,21 2,21 2,21 2,41
Pressure (bar)
Min. Inlet Pressure (bar) 0,21 0,34 0,34 0,34 0,55
DZK-700-1-MF Minimum Inlet
2,01 2,21 2,21 2,21 2,41
Pressure (bar)
Dripin PC Brown Performance Table—Metric Dripin PC Brown Length of Run—Metric

Flow Rate 2.0/4.0 lph
Inlet pressure vs. Max length of
Coefficient of Variation (Cv) ≤ 5% 15.75mm ID / 18mm OD)
run in Meters
Flow Exponent (x) 0.05 Flow Emitter
Part Number Tubing Size 1.03 bar 1.72 bar 2.07 bar 2.76 bar
Inside Diameter 15,75 mm Rate Spacing
T-PCS1853-12 15.75 mm ID 2.0 lph 30.5 cm 76 m 110 m 122 m 140 m
Wall 1,143 mm
Operating Pressure (P) 1,03–4,13 Bar
Minimum Filtration Requirement 125 Micron
Hazen-Williams C Factor 140
Barb Loss Factor (Kd) .98
178
Toro Limited Warranty for Irrigation Products
The Toro Company and its affiliate, Some states do not allow limitations on Landscape Drip Warranty
Toro Warranty Company, pursuant to how long an implied warranty lasts, so Warranty period from date of delivery:
an agreement between them, jointly this limitation may not apply to you. DL2000® Series Dripline
warrants to the owner, each new piece • Emitters 2 years
of irrigation product (featured in the This warranty gives you specific legal • Hose 5 years (prorated)
current catalog at date of installation) rights and you may have other rights, • Rootguard 7 years
against defects in material and which vary from state to state.
workmanship for a period described Drip In® Series Dripline
herein, provided they are used for Standard Warranty • Emitters 2 years
irrigation purposes under manufacturer’s Toro Irrigation Division products are • Hose 5 years (prorated)
recommended specifications. covered by this warranty for a period of
two years from the date of installation, Blue Stripe® Hose
During the warranty period, we will except as otherwise noted. • All 7 years (prorated)
repair or replace, at our option, any
part found to be defective. Your remedy Extended Three-year Warranty Fittings
is limited solely to the replacement The following products are covered by • All 1 year
or repair of defective parts. This this warranty for three years from date of
warranty does not apply (i) to Acts of installation: TMC-212 Series, DDC™WP Emission Devices
God (e.g., lightning, flooding, etc.) controller, 690 Series Rotors, and EZ-Flo® • All (except NGE) 1 year
unless specifically listed under the Plus Series valves. • NGE Emitter and
Extended Lightning Protection Warranty Drip Bubblers 2 years
provided herein; or (ii) to products not Extended Five-year Warranty
manufactured by Toro when used in The following products are covered by Filters and Components
conjunction with Toro products; or (iii) this warranty for five years from date • All 1 year
where equipment is used or installation of installation: 570Z PR and 570Z PRX
is performed in any manner contrary to Series fixed sprays; Precision™ Series Other Accessories
Toro’s specifications and instructions, or Rotating Nozzles, Super 800 Series, • All 1 year
where equipment is altered or modified. TR50XT Series, T5 Series, TR70XTP
Series, T7 Series, TS90 and 640 Series Grounding
Return the defective part to your rotors; TPV Series, P‑220 Series valves The Toro Warranty for Irrigation
irrigation contractor or installer, or your and 220 Brass Series valves; TMC‑424E Controllers is void if controller is not
local distributor who may be listed in Series, Intelli‑Sense™ (TIS‑612/TIS-PRO), properly grounded per instruction
your telephone directory Yellow Pages TDC controller and Custom Command manual. A good ground source is a
under "Irrigation Supplies" or "Sprinkler Series controllers; and TWRS and TWRFS mandatory component of overall surge
Systems," or contact The Toro Warranty Wireless RainSensor™ Series (receiver protection for Toro Irrigation Control
Company, 5825 Jasmine Street Riverside, and transmitter). Systems. Grounding electrode(s)
California 92504, phone (877) 345‑8676 should be placed at each automatic
for the location of your nearest Toro Sentinel® Series Product Warranty controller or controller group locations.
distributor, or outside the U.S., call All Sentinel centrals, with the exception The resistance to the grounding
(951)‑688‑9221. of centrals covered by the Toro National electrode should not exceed 10 Ohms
Support Network (NSN®), and Sentinel when measured with a Megger Earth
Neither Toro nor Toro Warranty hand held remotes are covered by this Resistance Testing instrument or
Company is liable for indirect, incidental warranty for a period of two years from equivalent. It is the responsibility of
or consequential damages in connection date of installation. the installer to connect all electronic
with the use of equipment, including irrigation equipment for which he
but not limited to: vegetation loss, the All Sentinel Series satellites are covered is responsible to earth ground in
cost of substitute equipment or services by this warranty for a period of five years accordance with Article 250 of the
required during periods of malfunction from date of installation. National Electrical Code (NEC.) Even
or resulting non-use, property damage with optimum grounding, neither Toro
or personal injury resulting from Lightning Protection Warranty nor Toro Warranty Company are liable
installer’s actions, whether negligent or In addition to the extended five‑year for product failures due to acts of God
otherwise. Some states do not allow the warranty, the Toro TMC-424E installed (i.e., lightning, flooding, etc.) and these
exclusion of incidental or consequential with High Surge Modules and Custom failures are not covered by warranty.
damages, so this exclusion may not Command Series controllers are
apply to you. specifically warranted against lightning-
related damage for a period of five years
All implied warranties, including those from date of installation when properly
of merchantability and fitness for use, installed and grounded in accordance
are limited to the duration of this with the installation instructions.
express warranty.
179
We reserve the right to improve our products and make changes in the specifications and
designs without notice and without incurring obligation.
Products depicted in this brochure are for demonstration purposes only. Actual products
offered for sale may vary in design and features.
©2012 The Toro Company

5825 Jasmine Street • Riverside, CA • 92504-1183 • www.toro.com
Catalog Order # 12-1001-IRC

Residential/Commercial Irrigation Specification Catalog

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Residential/Commercial Irrigation Specification Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Residential/Commercial Irrigation Specification Catalog

Uploaded by

Copyright:

Available Formats

Residential/Commercial

Irrigation Specification Catalog

The Toro Precision Irrigation Portfolio is:

Toro Technical Support

Toro Controller Repair

Toro Online Information

Precision™ Soil Sensor

RainSensor™ Series Intelli-Sense™

TPV Valve Series

P-220 Valve with TFS Series

TPV Drip Zone Kit

570ZXF Sprays with patented

Fixed Sprays Overview...............8-9 TVAN Variable Arc Nozzles..........26

Rotors Pages 32-57

Rotors Overview.....................32-33 TR70XTP Series.....................46-47

Valves Pages 58-75

Valves Overview.....................58-59 P-220 Series.........................68-69

Controllers Pages 76-93

Controller Overview..............76-77 TIS-612 Series............................86

Sensors and Remotes Overview TFS (Flow Sensors)..................100

Central Control Pages 104-119

Central Control Overview...104-105 Hand Held Remote.................114

Landscape Drip Pages 120-141

Landscape Drip Overview Turbo SC® Plus Emitter....132-133

Resources Pages 142-179

Customer Support....................142 Pressure Loss/Water Meters......165

Model LPS Series 570Z 570ZLP 570ZXF 570ZPR 570ZPRX

Note: All 570 nozzles work in all Toro® sprays.

TVAN 8’-17’ 0.7-5.60 GPM 30 PSI

Stream Sprays 13’-22’ 0.6-2.70 GPM 30 PSI

Easy Grip Top

Compatible With All 570Z Nozzles

Water Management Highlight

Easy Arc Adjustment Means Accurate Watering

TVAN Series nozzles are designed to deliver effective

Operating Specifications and Features

LPS Series Model List

Specifying Information—LPS Series

• Shrub, 2” (50mm), 3” (75mm), 4” (100mm), 6” (150mm) and 12” (300mm) Pop-up

Versatile. Flexible. Reliable. The Toro® 570Z Features & Benefits

One-Piece Check Valve

Low Pressure or Enhanced Retraction Spring

Small 2” (50mm) Diameter Cap

Water Management Highlight

With a pressure-activated wiper seal that flushes only

Specifying Information—570ZLP Series

Specifying Information—570Z Series

Convenient and versatile. The Toro® 570ZXF Features & Benefits

Zero Flush Wiper Seal

Enhanced Retraction Spring and Wiper Seal

One-Piece Check Valve

Small 2” (50mm) Diameter Cap

Water Management Highlight

X-Flow Technology Shuts Off Water Waste

A missing or damaged spray head nozzle can let up to 40

Warranty 570ZXF Series Model List

Specifying Information—570ZXF Series

Built-in pressure regulation. The Toro® 570ZPR Features & Benefits