General Technical Data 1006 - 6t

General Technical Data
Perkins 1006.6T Engine Specifications
Engine Model ............... Perkins 1006-6T

Engine Type ............... 4-Stroke six-cylinder turbocharged diesel
Number of Cylinders ............... 6
Cylinder Arrangement ............... In-line
Engine Bore, in (mm) ............... 3.94 (100.0)
Engine Stroke, in (mm) ............... 5.00 (127.0)
Displacement, cu.in (L) ............... 365 (5.99)
Aspiration ............... Turbocharged
Rated Engine Power, hp (kW) ............... 166.1 (123.0)
Rated Engine Speed, rpm ............... 2300
Maximum Torque, Nm (ft-lbs) ............... 577 (427)
Torque Speed, rpm ............... 1600
Idle speed, rpm ............... 850
Direction of Rotation ............... Clockwise from the front
Combustion System ............... Direct injection
Compression Ratio ............... 17.3:1
Firing Order ............... 1-5-3-6-2-4
Lubrication System ............... Gear pump
Oil Filter Type ............... Spin-on full flow
Cooling System ............... Centrifugal pump pressurised radiator
Air Cleaner ............... 2-stage, dry element
Electrical System Rating, Volts ............... 12
Fuel System
Injection Pump Type ............... Rotary

Injection Pump Model ............... Stanadyne
Lift Pump Type ............... Diaphragm
Lift Pump Drive Method ............... Eccentric on engine camshaft
Governor Type ............... Mechanical
Fuel Filter Type ............... Twin parallel flow or single element
Dimensions and Weight
Overall Width, in (mm) ............... 37.3 (944)

Overall Height, in (mm) ............... 30.8 (780)
Overall Depth, in (mm) ............... 26.8 (677)
Net Weight, lbs (kg) ............... 922 (419)
Perkins 1006.6T Maintenance Data
Cylinder Block and Valves
Cylinder Bore Inside Diameter (Maximum), in (mm) ............... 3.9429 (100.150)

Cylinder Head (Max. Out of Flatness), in (mm) ............... 0.0011 (0.03)
Intake Valve Clearance, in (mm) ............... 0.008 (0.20)
Exhaust Valve Clearance, in (mm) ............... 0.018 (0.45)
Engine Oil and Filters
Engine Oil Type ............... SAE 5W-20, 10W-30, 15W-40

Oil Classification ............... API Service CE, CF4 or CG4
Oil Capacity, qts (L) ............... 14.3 (13.5)
Oil Filter Part Number ............... 2654403/2654407/2654412
Fuel Filter Part Number ............... 26560143
Air Filter Part Number ............... 26510342/26510353, 26510343/26510354
Service Intervals
Service Air Cleaner ............... Every 200 hours

Check Drive Belt ............... Every 200 hours
Change Engine Oil ............... Every 250 hours
Change Oil Filter ............... Every 400 hours
Replace Fuel Filter ............... Every 400 hours
Check and Adjust Valve Clearance ............... Every 400 hours
Replace Air Filter Element ............... Every 400 hours
Clean Fuel Lift Pump Strainer ............... Every 400 hours
Perkins 1006.6T Service Data
Cylinder Block
Cylinder Bore Inside Diameter (Std), in (mm) ............... 3.9370-3.9380 (100.000-

100.025)
Cylinder Bore Inside Diameter (Wear Limit), in (mm) ............... 3.9429 (100.150)
Cylinder Bore Oversize Inside Diameter (Std), in (mm) ............... 3.9567-3.9577
(100.500-100.525)
Cylinder Bore Oversize Inside Diameter (Wear Limit), in (mm) ............... 3.9626 mm
(100.650)
Connecting Rod Small End Inside Diameter, in (mm) ............... 1.693-1.694 (43.01-
43.04)
Connecting Rod Big End Inside Diameter, in (mm) ............... 2.6460-2.6465 (67.21-
67.22)
Connecting Rod Big End Oil Clearance, in (mm) ............... 0.0012-0.0032 (0.030-0.081)
Crankshaft Main Journal Outside Diameter (Std), in (mm) ............... 2.9984-2.9996
(76.159-76.190)
Crankshaft Main Journal Outside Diameter (Wear Limit), in (mm) ............... 2.9969
(76.119)
Crankshaft Journal Width (Front), in (mm) ............... 1.454-1.484 (36.93-37.69)
Crankshaft Journal Width (Center), in (mm) ............... 1.738-1.741 (44.15-44.22)
Crankshaft Journal Width (Other), in (mm) ............... 1.545-1.549 (39.24-39.35)
Crank Pin Outside Diameter (Std), in (mm) ............... 2.499-2.500 (63.47-63.49)
Crank Pin Outside Diameter (Wear Limit), in (mm) ............... 2.497 (63.43)
Crankshaft End Play, in (mm) ............... 0.002-0.015 (0.05-0.38)
Cylinder Head and Valves
Cylinder Head Flatness, in (mm) ............... 0.00004-0.00011 (0.001-0.003)

Leak Test Pressure, psi (kPa) ............... 29 (200)
Intake Valve Clearance (Cold), in (mm) ............... 0.008 (0.20)
Exhaust Valve Clearance (Cold), in (mm) ............... 0.018 (0.45)
Cylinder Head Hole Diameter for Intake Valve Guide, in (mm) ............... 0.5118-0.5128
(13.000-13.027)
Cylinder Head Hole Diameter for Exhaust Valve Guide, in (mm) ............... 0.5512-
0.5522 (14.000-14.027)
Intake Valve Stem Outside Diameter, in (mm) ............... 0.3525-0.3533 (8.953-8.975)
Exhaust Valve Stem Outside Diameter, in (mm) ............... 0.3519-0.3528 (8.938-8.960)
Intake Valve Guide To Stem Clearance, in (mm) ............... 0.001-0.0027 (0.025-0.069)
Exhaust Valve Guide To Stem Clearance, in (mm) ............... 0.0016-0.0033 (0.040-
0.084)
Intake Valve Head Diameter, in (mm) ............... 1.688-1.698 (42.88-43.12)
Exhaust Valve Head Diameter, in (mm) ............... 1.609-1.619 (40.88-41.12)
Valve Seat Angle (Intake/Exhaust), deg ............... 46 or 31
Valve Face Angle (Intake/Exhaust), deg ............... 45 or 30
Valve Guide Inside Diameter, in (mm) ............... 0.3543-0.3552 (9.000-9.022)
Valve Spring Free Length, in (mm) ............... 1.54 (39.00)
Cam Height (Intake), in (mm) ............... 0.2999-0.3029 (7.62-7.69)
Cam Height (Exhaust), in (mm) ............... 0.3036-0.3066 (7.71-7.79)
Piston and Piston Rings
Piston Pin Bore Inside Diameter (Standard), in (mm) ............... 1.5631-1.5633 (39.703-
39.709)
Piston Pin to Small End Bushing Clearance, in (mm) ............... 0.0009-0.0017 (0.023-
0.044)
Piston Pin Outside Diameter, in (mm) ............... 1.5628-1.5630 (39.694-39.700)
Small End Bushing Outside Diameter, in (mm) ............... 1.6972-1.6988 (43.110-
43.150)
Small End Bushing Inside Diameter, in (mm) ............... 1.5638-1.5645 (39.723-39.738)
Piston Pin to Piston Bore Clearance, in (mm) ............... 0.0001-0.0006 (0.003-0.015)
Top Ring Width (Tapered), in (mm) ............... 0.118 (3.00)
Second Ring Width, in (mm) ............... 0.097-0.098 (2.48-2.49)

Oil Ring Width, in (mm) ............... 0.1366-0.1374 (3.47-3.49)
Second Ring to Groove Side Clearance, in (mm) ............... 0.003-0.004 (0.07-0.10)
Oil Ring to Groove Side Clearance, in (mm) ............... 0.002-0.003 (0.05-0.09)
Top Ring End Gap, in (mm) ............... 0.011-0.025 (0.28-0.63)
Second Ring End Gap, in (mm) ............... 0.016-0.034 (0.40-0.85)
Oil Ring End Gap, in (mm) ............... 0.010-0.031 (0.25-0.75)
Perkins 1006.6T Torque Specifications
Cylinder head bolts, Nm (lb-ft) ............... 110 (81)

Connecting rod nuts, Nm (lb-ft) ............... 125 (92)
Connecting rod bolts, Nm (lb-ft) ............... 152 (114)
Crankshaft main bearings bolts, Nm (lb-ft) ............... 265 (196)
Crankshaft pulley bolts, Nm (lb-ft) ............... 115 (85)
Flywheel bolts, Nm (lb-ft) ............... 105 (77)
Flywheel housing bolts, Nm (lb-ft) ............... 70 (52)
High-pressure fuel pipes nuts, Nm (lb-ft) ............... 22 (16)
Fuel lift pump bolts, Nm (lb-ft) ............... 22 (16)
Oil pump bolts, Nm (lb-ft) ............... 22 (16)
Oil pump cover bolts, Nm (lb-ft) ............... 28 (21)
Water pump pulley nuts, Nm (lb-ft) ............... 77 (56)
Fan drive pulley bolts, Nm (lb-ft) ............... 44 (33)
Idler gear hub bolts, Nm (lb-ft) ............... 44 (33)
Camshaft gear bolts, Nm (lb-ft) ............... 95 (74)
Alternator retaining nut, Nm (lb-ft) ............... 60 (44)

General Technical Data 1006 - 6t

Uploaded by

Copyright:

Available Formats

General Technical Data 1006 - 6t

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Technical Data 1006 - 6t

Uploaded by

Copyright:

Available Formats

General Technical Data

Perkins 1006.6T Engine Specifications

Engine Model ............... Perkins 1006-6T

Injection Pump Type ............... Rotary

Dimensions and Weight

Overall Width, in (mm) ............... 37.3 (944)

Cylinder Block and Valves

Cylinder Bore Inside Diameter (Maximum), in (mm) ............... 3.9429 (100.150)

Intake Valve Clearance, in (mm) ............... 0.008 (0.20)

Exhaust Valve Clearance, in (mm) ............... 0.018 (0.45)

Engine Oil and Filters

Engine Oil Type ............... SAE 5W-20, 10W-30, 15W-40

Service Air Cleaner ............... Every 200 hours

Perkins 1006.6T Service Data

Cylinder Bore Inside Diameter (Std), in (mm) ............... 3.9370-3.9380 (100.000-

Cylinder Head and Valves

Cylinder Head Flatness, in (mm) ............... 0.00004-0.00011 (0.001-0.003)

Piston and Piston Rings

Second Ring Width, in (mm) ............... 0.097-0.098 (2.48-2.49)

Perkins 1006.6T Torque Specifications

Cylinder head bolts, Nm (lb-ft) ............... 110 (81)

You might also like