C4080 Product Guide-1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 72

MBM Technology Solutions

248.597.1095
www.MBMsolutions.com

PRODUCT GUIDE
AccurioPress C4080/C4070
AccurioPrint C4065
February 1, 2021 (v1.3)
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

ABOUT THE PRODUCT GUIDE

Applicable devices
This Product Guide is applicable for the below devices:
– AccurioPress C4080/C4070, AccurioPrint C4065

Precautions for use of this document


This document is developed using the AccurioPress C4080/C4070, AccurioPrint C4065 service manual or 3rd party service manual (when
applicable). If any discrepancies are found, please refer to the corresponding service manual.

Explanation of Symbols
Symbol Description

Newly equipped function

Function enhanced from the existing machine

Function that requires an option

2
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

CONTENTS
Main Unit
Hardware Design Improvements.................................................................. 8
Large Capacity Paper Feed and Output........................................................ 9
New Engine Technology............................................................................. 10
Improved Printing Performance................................................................. 12
Improved Paper Compatibility.................................................................... 13
Media Detection Function.......................................................................... 16
Enhancement of Front-to-Back Registration Adjustments.......................... 19
High-Quality Output Even Without Skill..................................................... 20
Improved Durability and Maintainability.................................................... 22
AccurioPrint C4065.................................................................................... 23
AccurioPress C4080 series vs. AccurioPress C3080 series........................... 24

Image Controllers
Konica Minolta IC-609/607........................................................................ 28
MYIRO-1..................................................................................................... 30
Fiery IC-317 vs. Fiery IC-419....................................................................... 31
Comparison of Image Controller Options................................................... 34

Key Options
TU-510 Trimmer Unit.................................................................................. 38
LS-507 Large Capacity Stacker................................................................... 41
IQ-501 Intelligent Quality Optimizer.......................................................... 43
DF-713 Dual Scan Document Feeder.......................................................... 46

Advantages
Inline Color Management.......................................................................... 50
Superb Image Quality................................................................................ 53
Curl Correction.......................................................................................... 56
Simitri HDE................................................................................................ 57
Registration Mechanism............................................................................ 62
Vacuum Feed Paper Deck........................................................................... 63

Demo Script............................................................................ 65

3
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Business Expansion

Improved responsiveness through


strengthened media support and
finishing functions.
Further Evolution from the
AccurioPress C3080 Series
Enhanced real-time correction Skill-less operation is made
and inspection functions, and possible by adopting an easy-to-
more stable print quality. It allows use management utility, enhanced
prediction of the parts that need to paper profiles, and enhanced
be replaced. automatic adjustment functions.

Automatic adjustment functions


such as image correction and print
adjustment have been enhanced. The
system can also be equipped with
a media sensor that automatically
detects the paper type.

4
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Konica Minolta continues to expand the future of professional


printing through a comprehensive and fully modular group of
digital printing technologies and solutions: Accurio.
Accurio expands flexibility, increases speed and efficiency, and
ensures high print quality for businesses ranging from dedicated
printing houses to creative design houses.
Accurio includes a line of digital press suites, state-of-the-
art inkjet printers, and software and cloud-based tools for
integrating, managing and executing seamless workflow.
Automating operations, expanding the possibilities of on-demand
offerings, and providing connectivity to prepress and postpress
systems, Accurio maximizes use of resources, reduces labor and
costs, and raises accuracy and productivity.
As customer demands for new services and reduced costs
continue to grow, printing businesses are embracing digital
technology for solutions beyond paper. Accurio is the single
solution for a new era in professional printing.
Advanced. Automated. Accurate.
Accurio Digital Professional Printing.

5
6
1. Main Unit
This section introduces the new features and
enhancements of the main unit.

7
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Hardware Design Improvement

New sleek edges


The same color blue as the existing AccurioPress New control panel
C3080 series, the AccurioPress C4080 series The control panel has been redesigned with bezel
features sleek edges instead of rounded corners edges.
like its predecessor.

C3080 C4080
C3080 C4080

8
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Large Capacity Paper Feed and Output

Compatibility with Large Volume


Paper Feed and Output Units Comparison of maximum paper feed capacity
The AccurioPress C4080 series is compatible
with large volume paper feed and output Main tray Paper feed unit Max. Capacity
units. These options increase productivity by Existing machine: 1,500 sheets 13,890 sheets
reducing downtime for loading paper and AccurioPress Tray 1: 500 sheets 15,390 sheets
4,630 x 3 units
C3080 Tray 2: 1,000 sheets
collecting printed materials.
AccurioPress 1,500 sheets 13,890 sheets
C4080 Tray 1: 500 sheets 15,390 sheets
4,630 x 3 units
Tray 2: 1,000 sheets

Capacity of paper feed unit (21 lb [80 gsm])

PF-707m MB-508*1 MK-760*1


Top 1,390 sheets 250 sheets 10 sheets
Middle 1,390 sheets — —
Bottom 1,850 sheets — —
Total 4,630 sheets 250 sheets 10 sheets
*1: When MK-760 is connected to MB-508, 250 sheets cannot be loaded into MB-508

Capacity of paper output unit (21 lb [80 gsm])

FS-532 LS-507 MK-761


Main Tray 3,000 sheets*1 6,000 sheets*3 10 sheets*2
Sub Tray 300 sheets 200 sheets —
*1: A4 paper, with SD-510 and MK-761 uninstalled.
*2” Mounting to OT-512, OT-511, FS-532, or RU-518m; paper length of 47.24 inches (1,200 mm) or less; uncoated paper.
*3: Twice the number (3,000 sheet x 2) or a total of 6,000 sheets can loaded without stopping the main unit as long as the output is removed as needed.

9
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

New Engine Technology

The AccurioPress C4080 series has several new engine technologies:


– Improved Print-head (PH) 8-beam laser diode (LD) print-head: Enables high-quality
printing with a resolution of 3,600 (equivalent) x 2,400 dpi
– Use of variable NIP technology in the standard fuser: Allows for printing envelopes at half-
rated speeds with the standard fuser
– Improved long paper path: Double-sided printing on long paper up to 34” (864 mm) in length
– New application-specific integrated circuit (ASIC): Equipped with the state-of-the-art image
processing technology “S.E.A.D. X” through the use of a new application-specific integrated
circuit (ASIC).

Improvement of paper path during duplex printing of long sheets

Variable Non-Impact printing (NIP) technology controls the pressure of the fuser roller. It is now possible to print on envelopes
(open flaps), at 1/2 rated speeds, with the standard fusing unit instead of a dedicated fusing unit for envelope printing. A dedicated
envelope fusing unit (EF-107) is available for printing at full rated speeds.

Variable NIP
Technology

10
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

New Engine Technology

Improvement of paper path during duplex printing of long sheets

The end point of the


trailing edge of long
The end point of the
paper (34”;864 mm)
trailing edge of long
when inverting.
The registration roller also
paper (30”; 762 mm)
works because the trailing when inverting in
edge of the paper reaches it. existing machines.

OUT
IN
(Manual bypass tray)

Registration
Roller

IN
(Paper feed unit)

11
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Improved Printing Performance

High-resolution printing
The AccurioPress C4080 series has a resolution of 3,600 dpi (equivalent) x 2,400 dpi, which is higher than the resolution of the existing
machines 3,600 dpi (equivalent) x 1,200 dpi.

Inside the AccurioPress C4080 series, there is a 8-beam Laser Diode (LD) print head which is able to write 2,400 dpi. Previous existing
models, used an 4-beam Laser Diode (LD) print head which allowed for 1,200 dpi.

Actual print samples

12
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Improved Paper Compatibility

Support of thick paper up to 360 gsm


The weight of printable thick paper has increased. The existing machine was able to print on thick paper up to 350 gsm. With the
AccurioPress C4080 series, it is possible to print on thick paper up to 360 gsm. Support of heavy-weight papers expands the range of
printed products that users can produce.

Revised types of coated paper


The supported types of coated paper have been merged
Existing machine:
from four to two. In the existing machine, four settings, AccurioPress C4080 series
namely “Coated paper GL” and “Coated paper ML” were AccurioPress C3080 series
available for laser printing, and “Coated paper GO” and
“Coated paper MO” were available for offset printing. Coated paper GL
Coated paper G
Coated paper GO
However, as coated papers are not distinguished for
use in laser printing and offset printing in the market,
the paper types were revised according to Gloss (G) and Coated paper ML
Coated paper M
Matte (M) parameters. The selection of paper for the Coated paper MO
AccurioPress C4080 series has been simplified to two
types only: “Coated paper G” and “Coated paper M”.

13
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Improved Paper Compatibility

Support of the standard fusing unit for envelopes printing


The AccurioPress C4080 series can print envelopes at half-rated speeds with the standard fuser. In the existing machine, it is necessary to
install an optional fusing unit for printing on envelopes. The main unit of the AccurioPress C4080 series features an improved fusing unit
that enables printing on envelopes without having to install a dedicated envelope fuser. Envelopes can be printed at full-rated speeds
with the EF-107 envelope fuser.

The following restrictions apply to printing on envelopes using the standard fusing unit:
– Printing speed
– “Low Speed” is set when the paper type is set to “Envelope”. Low speed is half the normal speed
– Print quality
– For printing jobs where image quality, such as halftones, is the priority, using the Envelope Fusing Unit EF-107 is
recommended.

Envelope fusing unit EF-107


The optional Envelope Fusing Unit EF-107 allows for printing envelopes at full-rated speeds.

Envelope Specifications
Min: 3.94” x 5.82” (100 x 148 mm)
3.54” x 5.82” (90 x 148 mm)
Envelope Size LU-202m, LU-202XLm with MK-746 installed

Max: 11.30” x 15.04” (287 x 382 mm)


Recommended
9.45” x 13.07” (240 x 322 mm)
Envelope Size
Envelope Weight 70 -100 gsm
Envelopes with double-stick tape or release
Envelopes Not coated paper on the flap
Single Side Seam Double Side Seam
Allowed Envelopes with film windows
Envelopes with triangle flap

14
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Improved Paper Compatibility

Expanded long sheet supported for automatic duplex printing


Duplex printing of longer sheets up to 34” (864 mm) is now possible. This is a 4” increase from the AccurioPress C3080 series support of
30” (762 mm).

Existing machine: AccurioPress C3080 series

Up to 30” (762 mm)

Increase of 4”
(102 mm)

Up to 34” (864 mm)

AccurioPress C4080 series

15
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Media Detection Function

IM-101 Intelligent Media Detection Sensor


The AccurioPress C4080 series supports an external media Compatible paper types
detection sensor, a device that automatically detects the paper type – Plain paper
and weight. The IM-101 is an optional device that connects to the – Fine paper
main unit via USB. – Coated paper G / Coated paper M

The detected paper information is used to present the user with


paper types and weights, and paper profile suggestions. About Surface properties sensor
300 paper profiles are registered in the built-in database, making
it possible to offer users the best paper profiles. Users can select Paper thickness sensor
the most suitable paper profile based on the situation, reducing Weight sensor
printing problems caused by incorrect settings. The IM-101 can be
used while a job is running to set up new medias for future jobs.

16
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Media Detection Function

Flow from media detection to printing


Paper settings can be specified simply by selecting from the paper choices displayed on the screen, so even unskilled users can specify
appropriate paper settings.

Manually set the parameters:


– Requires an understanding of paper attributes, especially when paper is left out unlabeled
– Can be input incorrectly resulting in misfeeds or image quality problems

Paper Setting Proof Print Run Job

AccurioPress C4080 series with IM-101


Automatic detection by sensor  no special skill required

Paper detection by sensor

Select from the displayed


paper types, weights, and
paper profile options

Application to tray

17
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Media Detection Function

Paper profile creation support function


When creating a paper profile, the paper type and basis weight measured by the sensor can be entered automatically.

Automatic detection by sensor  Automatic Setting

Paper Type Paper Weight

Paper setting support function


The paper type and weight measured by the sensor are automatically reflected in the paper settings of the tray.

Automatic detection by sensor  Automatic Setting

18
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Enhancement of Front-to-Back Registration Adjustments

Print resolution has been enhanced to 3,600 (equivalent) x 2,400 dpi and image positioning accuracy has been improved making it
possible to correct oblique lines in image processing. On existing machines, image positioning can be adjusted for Zoom, Image Shift,
and Rotate/Skew. It is now possible with improved image resolution to adjust for oblique (slanting) lines using the new Trapezoid
Correction. These image position adjustments ensure reliable front-to-back registration.

Zoom Image Shift Rotate / Skew

Trapezoid Correction Curve / Peak Curve


Trapezoid correction,
Curve & Peak Curve
Corrects an image that has been
distorted into a trapezoidal shape or
is curved by image processing.

Both vertical and horizontal


misalignments can be corrected.
Although correction values can be
set for the front and back sides, only
front-back misalignment can be
corrected by automatic adjustment.

19
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

High-Quality Output Even Without Skills

About 300 paper profiles loaded as standard


About 300 paper profiles are loaded as standard on the AccurioPress C4080 series.
– Paper brand profiles: Brands of paper in high demand in the market
– Special paper profiles: Paper with high added value such as water-resistant paper and stone paper
Even when printing on infrequently used brands of paper or special paper, the appropriate paper profile can be used, helping to reduce
errors and improve print quality.

Improved display of paper profiles


The paper profile display format has been improved to make it easier to select the appropriate paper profile.

[Applied History], [Favorite Profile], and [Special Profiles] have been added to the Paper Profile screen in the Paper Settings.
– [Applied History]: Allows you to automatically pick up and select frequently used paper profiles from your history.
– [Favorite Profile]: Allows you to select paper profiles set as favorites.
– [Special Profiles]: Allows you to select special paper profiles, such as label paper and water-resistant paper.
The improved display allows the user to quickly select the best paper profile for the situation.

[Paper Setting] Screen

Reminder note for paper profiles


The paper profiles provided by Konica Minolta are now
displayed with reminder notes such as information
about jams. When a tray is opened, the reminder notes
for the set paper profile are displayed on the screen.

The text of the reminder notes is not registered to the


paper profile itself, but text of the appropriate content
is shown from among 10 set phrases registered in the
main unit. The reminder notes regarding the paper
are displayed on the screen, allowing the user to take
appropriate action.

20
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

High-Quality Output Even Without Skills

“Easy adjustment” that allows users to make adjustments according to the printing problem
Users can now easily make adjustment according to the printing problem. To make adjustments for a printing problem, it is necessary to
find the appropriate item among many setting items and set the parameters. With the AccurioPress C4080 series, the user can adjust the
necessary setting items properly just by selecting the type of printing issues.

Access Simple Settings through Paper Settings

An explanation is provided on what


type of issue the setting will adjust for.

21
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

Improved Durability and Maintainability

Addition of warning screen prompting for charging coronas


When you have printed over a certain number, a warning screen prompting you to clean the charging coronas is displayed on the control
panel of the main unit. The charging coronas can be cleaned while following the guide displayed on the screen. Cleaning it before
replacing the unit improves the life of the charging coronas.

Administrator settings / User settings

The display setting of the warning screen that prompts you to clean the charging coronas can be changed in [Shared Settings] of the
administrator settings or user settings.
– [Cleaning display]: Shows/hides the warning screen.
– [Cleaning count value correction]: Allows you to select the timing display the warning screen (display earlier or later).
– [Morning display]: Displays the warning screen when the power is turned on for the first time on a certain day, if a certain
number of prints has been exceeded.
– [Job suspension]: Suspends the job at the same time the warning screen is displayed.
– [Prohibition to resume job]: Prohibits the user from resuming the job when the warning screen is displayed.

22
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

AccurioPrint C4065

Positioned to compete with the competitions’ border engines


The new AccurioPrint C4065 replaces the AccurioPrint C3070L, runs at 65 color prints per minute and 80 black and white prints per
minute. The C4065 supports the same media weights, types, sizes as the C4080 and C4070; this includes media up to 360 gsm in weight,
auto-duplexing sheets up to 34 inches in length, and printing envelopes with the standard fuser at half rated-speeds. And while there
are some limitations to finishing options, the AccurioPrint C4065 is configurable with an all-in-one finisher allowing for saddle stitch
booklets, stapling, and punching, making it a great fit for large office environments.

C4065 C3070L
AccurioPrint C4065 vs. AccurioPrint C3070L:
Paper Feed Options
Important key differences
LU-202m/LU-202XLm x x
Envelope Printing MB-506 x
C4065: Envelope printing at 1/2 rated speeds with standard fuser MB-509 x
(optional EF-107 for printing at full-rated speeds) PF-602m x
C3070L: Requires EF-103 envelope fuser to print envelopes
PF-707m x
Long Sheet Printing Finishing Options
C4065: Auto-duplex sheets up to 34” in length FS-612 x
C3070L: Auto-duplex sheets up to 30” in length FS-531 x
Automation FS-532 x
C4065: External media sensor for automatically detecting paper type OT-510 x
and weight OT-511 x x
C3070L: No external media sensor OT-512 x

23
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Main Unit — AccurioPress C4080/C4070, AccurioPrint C4065

AccurioPress C4080 series vs. AccurioPress C3080 series

AccurioPress AccurioPress AccurioPrint AccurioPress AccurioPress AccurioPrint


NEW
C4080 C4070 C4065 C3080/C3080P C3070 C3070L
Monthly Duty Cycle 864,000 758,000 702,000 864,000 758,000 758,000
Print Resolution 8- beam; 3,600 (equiv.) x 2,400 dpi 4-beam; 3,600 (equiv.) x 1,200 dpi
3.94” x 5.83” to 13” 19.2” 3.94” x 5.83” to 13” 19.2”
Paper Size
(100 x 148 mm to 330.2 x 487.7 mm) (100 x 148 mm to 330.2 x 487.7 mm)

Paper Weight 62 - 360 gsm 62 - 350 gsm


Simplex: 51” (1,300 mm) Simplex: 51” (1,300 mm)
Banner Printing
Duplex: 34” (864 mm) Duplex: 30: (762 mm)
8.5” x 11” 80 / 80 ppm 70 / 80 ppm 65 / 80 ppm 80 / 80 ppm 70 / 80 ppm 70 / 80 ppm
Productivity
A4 81 / 81 ppm 71 / 81 ppm 66 / 81 ppm 81 / 81 ppm 71 / 81 ppm 71 / 81 ppm
(Color/BW)
A3 45 / 45 ppm 39 / 45 ppm 37 / 45 ppm 45 / 45 ppm 39 / 45 ppm 39 / 45 ppm
177-216 gsm 81 ppm 71 ppm 66 ppm 81 ppm 71 ppm 71 ppm
Productivity
by paper 217-350 gsm 51 ppm 45 ppm 45 ppm 51 ppm 45 ppm 45 ppm
weight (A4)
351-360 gsm 45 ppm 30 ppm 30 ppm — — —
IC-605 (KM) IC-605 (KM)
IC-609 (KM) IC-609 (KM)
IC-607 (KM) IC-313 (EFI) IC-313 (EFI) IC-605 (KM)
Image Controllers IC-317 (EFI) IC-317 (EFI)
IC-419 (EFI) IC-417 (EFI) IC-417 (EFI) IC-417 (EFI)
IC-419 (EFI) IC-419 (EFI)
IC-314 (CREO) IC-314 (CREO)
31.5” x 35.5” x 42.36” 31.5” x 35.5” x 42.36”
Dimensions (W x D x H)
(800 x 903 x 1,076 mm) (800 x 903 x 1,076 mm)

Weight Approximately 696.66 lb (316 kg) Approximately 703.28 lb (319 kg)

24
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Notes — AccurioPress C4080/C4070, AccurioPrint C4065

25
26
2. Image Controller
This section introduces the new features and
enhancements of the image controllers

27
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Konica Minolta IC-609/607

High-speed processing that’s faster compared to the existing machine has been made possible through the installation of a dedicated
high-speed CPU and an increased memory capacity. This is due to the IC-609/607 no longer being embedded, but now bustled to the
device.

Best Fit
– CRDs, Large Offices, Print-for-Pay, Commercial Printers
– Customers who want both reasonable price and high
performance with job and color management tools at no
additional cost.
– Customers who do not need Fiery Command WorkStation
– Customers that want full integration with Konica Minolta
Solutions (e.g., AccurioPro Flux).
– Customers that want to work on both the engine panel
and/or computer.
– Customers that want high quality color and the ability to
maximize the engine’s color gamut.
– Customers requiring JDF/JMF connectivity.

IC-609 IC-607
Compatibility AccurioPress C4080/C4070 AccurioPrint C4065
Architecture Bustled Bustled
OS Linux Linux
CPU Intel® CoreTM i5-6500, 3.2 GHz Intel® Pentium® G4400 3.3 GHz
Memory 16 GB 16 GB
HDD 2 TB (1 TB x 2) 2 TB (1 TB x 2)
PDL Adobe PostScript3 (PS3020), PDF direct print (PDF Adobe PostScript3 (PS3030), PDF direct print
version 1.7), APPE (version 4.6) - with UK-220, TIFF (PDF version 1.7), TIFF direct print (TIFF version 6
direct print (TIFF version 6 compliance), PPML compliance), PPML (version 2.2)
(version 2.2)
Printing Method TCP/IP (LPR/LPD, RAW), SMB, IPP (TCP/IP), Bonjour TCP/IP (LPR/LPD, RAW), SMB, IPP (TCP/IP), Bonjour
(TCP/IP), Web service printing (TCP/IP), SNMP (TCP/IP), Web service printing (TCP/IP), SNMP

28
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Konica Minolta IC-609/607

Connecting to the main unit


Connect the Image Controller IC-609-607 and the main unit with a LAN cable and DisplayPort cable.

IC-609/607 Main Unit

LAN port LAN port

DisplayPort DisplayPort

USB port

LAN port

Improved RIP speed


Compared to the IC-605 of the existing machines, the RIP for high-resolution images and other data has been increased by the
installation of a dedicated CPU and greater memory capacity. As a result, the number of printable sheets per hour has significantly
improved, greatly boosting user productivity.

Existing machine: IC-605 IC-609/607


IC-609: Intel® CoreTM i5-6500, 3.2 GHz
CPU Uses the CPU of the main unit
IC-607: Intel® Pentium® G4400 3.3 GHz
AccurioPress C3080/C3070: 10 GB
Memory (standard) 16 GB
AccurioPrint C3070L: 4 GB

29
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Konica Minolta IC-609/607

IC-610 IC-609 IC-607 IC-605 IC-604


AccurioPress AccurioPress AccurioPrint AccurioPress AccurioPrint AccurioPress
Engine
C14000/C12000 C4080/C4070 C4065 C3080/C3070 C3070L C6100/C6085
Architecture Bustled Bustled Bustled Embedded Embedded Embedded
Intel® CoreTM Intel® CoreTM Intel® Pentium® Intel® CoreTM Intel® Pentium® Intel® CoreTM
CPU i7-6700, 3.4 GHz i5-6500, 3.3 GHz C4400, 3.2 GHz i5-4570, 2.9 GHz C3420, 3.2 GHz i5-4570, 2.9 GHz
Dedicated CPU Same as Main Engine
Memory 16 GB 16 GB 16 GB 14 - 20 GB 14 - 20 GB 20 GB
Storage 3 TB 2 TB 2 TB 3 - 3.5 TB 3 - 3.5 TB 4 TB
USB Option Yes Yes Yes No No No
APPE Option Std Yes No Yes No Std

MYIRO-1 Spectrophotometer

The Newest Spectrophotometer from Konica Minolta Sensing


The MYIRO-1 is an affordable handheld spectrophotometer designed with ease-of-use in mind. Its
wireless capabilities increases the efficiency of day-to-day printer readiness by allowing you
to take measurements where and when you want.

– Handheld to calibrate color presses and can be used in


place of the ES-2000/ES-3000
– Can be used wirelessly
– Pricing is similar as EFI product
– Gives the ability to offer one Konica Minolta
solution
– Sales of ES-2000/ES-3000 will be phased out so we
can offer one more Konica Minolta solution

30
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Fiery IC-317 vs. Fiery IC-419

Konica Minolta® offers two Fiery® servers designed for the Konica Minolta AccurioPress C4080 series Fiery IC-317 and Fiery IC-419. The
following will help you to identify the correct solution for your production environment.

Fiery external print servers: Top reasons to buy the Fiery IC-317 server
EFITM offers to Fiery® server platforms for the Konica Minolta AccurioPress C4080 series — the external server Fiery IC-317 and the
embedded (bustled) server Fiery IC-419. These two servers platforms vary in the level of PDF processing controls, automation, and
productivity, workflow integration, and expandability they offer. The following helps you understand the benefits of an external Fiery
server, how it meets your current needs and how it offers built-in flexibility for future growth.

Fiery IC-317 server only: Standard features


1. Faster turnaround times 4. Fiery QuickTouch software
To maximize your engine capacity, you need a high- The Fiery IC-317 features the new Fiery NX Pro hardware.
powered digital front end to process and drive data fast The NX Pro includes Fiery QuickTouchTM software on the
enough to minimize engine idle time. More robust and touchscreen display, which gives faster views of job status
powerful hardware specifications make the Fiery IC-317 information and access to server management. With just
server 48% faster rather than the Fiery IC-419 server, a tap, the touchscreen display gives operators easy access
making it the best choice for production environments to intuitive system installation, backup and restore, plus
system diagnostics.
2. Optimal print output
Fiery external servers running on Fiery FS400 Pro software 5. Fiery deployable image
come with Fiery JobExperTM that lets you reduce setup Service technicians can save time when installing multiple
time, enables faster processing, and cuts waste. JobExpert Windows-based Fiery servers in a single organization. The
analyzes each PDF print job in detail and sets the best Fiery Fiery deployable image captures a distributable image
job settings for color management, image quality, VDP of a fully configured Fiery server, include Fiery patches,
settings, and engine specific properties. Windows security updates, and user configurations.
3. Flexible variable data printing services 6. Microsoft Windows 10 IoT Enteprise 2019 LTSC
The robust, open, flexible, and scalable variable data Fiery FS400 Pro external servers use Microsoft Windows®
printing (VDP) solution supports all leading VDP formats 10 IoT Enterprise 2019 LTSC as their operating system. This
including PDF-VT, VPS, and PPML; and works with all Windows edition contains the latest security protections
leading VDP composition software and formats for seamless and includes the cumulative feature enhancements
workflows. The faster processing speed also makes offering provided in Windows 10 versions 1703, 1709, 1803, and
VDP services more profitable. 1809
7. USB security
Maintain a secure print environment. Fiery external servers
prevent connection of USB storage devices by disabling
Fiery features that require USB mass storage functions,
such as backup and restore.

31
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Fiery IC-317 vs. Fiery IC-419

Fiery IC-317 server: Optional features


1. Secure storage for print files Fiery IC-419 server: Optional features
The optional removable hard disk drive allows While these features are standard on Fiery IC-317 server, you may add
you to lock the server drive into the system for them as options on the Fiery IC-419 server by purchasing the Fiery
normal operation and remove it to a secure ColorRight Package, Fiery Automation Package, or standalone software
location after powering down the server. options. Be sure to compare the cost of the Fiery IC-419 server with the
2. A centralized production workspace for operators additional software added for a more accurate comparison to the Fiery
The Fiery NX Station is a compact, centralized IC-317 server.
workstation for Fiery external servers that adapts 1. Automated Web-to-Print submission, and integration with EFI
to different print production environments. MSI systems
It comes in two models: NX Station GL, which Fiery servers are the only DFEs certified by CIP4 as fully
features a 22” display, or NX Station LS, which compliant with the job definition format ( JFD) IDP-ICS. By
features a 27” display, 6” adjustable-height adhering to this standard, Fiery servers integrate seamlessly
workspace, proximity sensor, and cable routing. with EFI MIS and Web-to-Print systems as well as with industry-
3. Operators need the ability to make the late-state leading third-party prepress workflow solutions such as Agfa
edits and corrections to files Apogee, Heidelberg Prinect, and Kodak Prinergy. This helps you
In demanding print environments, operators more efficiently deliver job specifications, update job status in
need to be able to easily perform last-state edits real time, track job costing data, and validate equipment usage.
to adjust colors, impose documents into booklets, 2. Superior photographic prints
and preview full raster files. This ensure the Image Enhance Visual Editor, a Fiery Command WorkStation®
highest quality when printing, for minimal waste plug-in, allows operators to make last-minute edits to a selected
and rework. The Fiery Graphic Arts Pro Package, image without having to open the image in applications such as
a powerful tool set, lets you identify and correct Adobe® Photoshop®.
production problems before printing a single
page. This eliminates wasted prints and keeps 3. Automated job submission that eliminates touch points
print engines producing profitability. Automate job-submission workflows with Fiery Hot Folders and
Virtual Printers to reduce errors and save time. This also allows
4. A powerful make-ready option to produce operators to give more attention to other jobs that require
differentiated output specific finishing and color settings.
Add Fiery JobMasterTM to offer advanced PDF
make-ready capabilities such as insertion of tab 4. Accelerated production with prepress workflow automation
pages without the need to design them in the Add the free Fiery JobFlow BaseTM on an embedded Fiery server
native application, multi-bank and bleed-edge with Fiery Automation Package and start building ready-to-use
tab setup, page merging, media assignment, workflows. Once Fiery JobFlow Base is enabled, upgrade to a
finishing, page numbering, NCR creation, paid license for the full version, Fiery JobFlow, for advanced
ticket numbering, plus hard-copy scanning prepress capabilities. You can easily configure automated job
and cleanup. This allows you to produce jobs workflows including correction and editing of PDF files, plus
completely inline and reduce labor costs on approval, scripting, and job ticketing.
manual job assembly tasks.
32
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Fiery IC-317 vs. Fiery IC-419

Fiery Server External - Fiery IC-317 Bustled - Fiery IC-419


Fiery System Software Fiery FS400 Pro Fiery FS400
Fiery Platform NX Pro Gen II E400
CPU Intel® Core™ i5-6500 Processor, 3.2 up to Intel® Pentium® G4400 Processor (3.3 GHz)
3.6 GHz with Turbo
Operating System Microsoft Windows 10 IoT Enterprise 2019 LTSC Linux
RAM / Hard Disk Drive (HDD) 8 GB / 1 TB SATA 8 GB / 500 GB SATA
Removable HDD OPTIONAL Not Available
Removable Storage DVD-RW/CD-RW Not Available
VDP Formats PPML 2.0/2.2/3.0, PDF/VT-1, PDF/VT-2, VPS, Fiery FreeForm Plus
Fiery FreeForm™ Plus
FreeForm Create INCLUDED INCLUDED
Fiery JobExpertTM INCLUDED Not Available
Fiery Spot-OnTM INCLUDED INCLUDED
Adobe® PDF Print Engine (APPE)*** INCLUDED INCLUDED
PDF/X Output Intent INCLUDED INCLUDED
Pad Printing INCLUDED INCLUDED
Fiery Hot Folders/Virtual Printers INCLUDED OPTIONAL with Fiery Automation Package*
Integration to EFI MIS and Web-to- INCLUDED OPTIONAL with Fiery Automation Package*
Print systems
Fiery Image Enhance Visual Editor INCLUDED OPTIONAL with Fiery ColorRight Package*
Fiery JDF INCLUDED OPTIONAL with Fiery Automation Package*
Fiery ImageViewer, Fiery Spot Pro, OPTIONAL with Fiery Graphic Arts Pro Package* OPTIONAL with Fiery ColorRight Package*
FieryPostflight, Fiery Control Bar
Fiery Preflight OPTIONAL with Fiery Graphic Arts Pro Package* OPTIONAL with Fiery ColorRight Package*
Fiery JobFlow Base FREE FREE (requires with Fiery Automation Package*)
Fiery JobFlow* OPTIONAL OPTIONAL (requires with Fiery Automation Package*)
Fiery Impose** OPTIONAL OPTIONAL
Fiery Compose OPTIONAL OPTIONAL
Fiery JobMaster* OPTIONAL OPTIONAL
EFI IQ INCLUDED INCLUDED
EFI ColorGuard INCLUDED (3 year subscription) INCLUDED (1 year subscription)
EFI Manage* OPTIONAL OPTIONAL
Fiery Color Profiler Suite** w/EFI ES- OPTIONAL OPTIONAL
2000spectrophotometer
Fiery NX Station GL OPTIONAL Not Available
Fiery NX Station LS OPTIONAL Not Available
* Free 30-day trail available
** Free trial in demo mode available
*** Updated with enhancements and service releases on an ongoing basis
33
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Image Controllers — AccurioPress C4080/C4070, AccurioPrint C4065

Comparison of Image Controller Options

Fiery IC-317 Fiery IC-419 Konica Minolta IC-609 Konica Minolta IC-607
Engine C4080/C4070 C4080/C4070 C4080/C4070
C4065
Compatibility C4065 C4065 C4065

Architecture External Bustled Bustled Bustled

OS Windows 10 Linux Linux Linux

Intel® CoreTM i5-6500, Intel® Pentium® G4400, Intel® CoreTM i5-6500, Intel® Pentium® G4400,
CPU
3.2 GHz 3.3 GHz 3.2 GHz 3.3 GHz

RAM (std.) 8 GB 8 GB 16 GB 16 GB

HDD 1 TB 500 GB 2 TB 2 TB

APPE Std. Std. Option No

34
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Notes — AccurioPress C4080/C4070, AccurioPrint C4065

35
36
3. Key Options
This section introduces the new features and
enhancements of key options

37
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

TU-510 Trimmer Unit

TU-510 Trimmer Unit overview


The new Trimmer Unit TU-510, can trim in all four directions using a slitting and cutting unit. This versatile finisher has the ability to
output finished business cards, as well as trimming and creasing a banner sheet to create letter size tri-fold brochures, or cutting down
11x17 to letter size.

The main functions of the TU-510 are:


– Four-side trimming
– Business card size cutting
– Creasing
– 12x18 paper to 2 letter size sheets
– Card cutting
– Perforation
The TU-510 comes standard with a slitting (outer edge slitting) and cutting unit, which is able to trim in all four directions. Additional
options include a mountain and valley creasing unit, trimming unit (allows for multiple slits in the middle of the sheet), and job separator
unit (business card catch tray), and cross and feed direction perforation unit. This makes it possible to produce a large amount of printed
matter requiring complex processing with ease.

Hardware platform
CR-102 Creasing Unit Mountain crease; Creases to avoid cracking when folded
CR-103 Creasing Unit Valley crease; Creases to avoid cracking when folded NEW
JS-507 Separator Unit Business card catch tray
PE-101 Perforation Unit Feed direction perforation unit NEW
PE-102 Perforation Unit Cross direction perforation unit NEW
MK-764 Banner Unit Enables banner feeding and paper reversal during paper output
MK-765 Dust Box / Scrap Ejection Unit Enables scraps to output to an external box allowing for uninterrupted runs NEW
TU-504 Trimmer Unit Allows multiple slits in the middle of the sheet

38
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

TU-510 Trimmer Unit

Internal configuration

TU-504 Center Trimming Unit (option) CR-102 Creasing Unit - Mountain (option)
CR-103 Creasing Unit - Valley (option) PE-102 Perforation Unit - Cross Direction (option)
PE-101 Perforation Unit - Feed Direction (option)

MK-764 Banner Reversal


(option)

Leading/Trailing
Edge Cutter Top/Bottom Slitter
(standard) (standard)

JS-507 Business Card Tray Unit MK-764 Banner Feeding


(option) (option)

MK-765 Dust Box / Scrap Ejection Unit (option) Scrap Box (standard)
Can hold up to 1,000 pages or more
(SRA3 Coated, 34 lb (128 gsm)

39
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

TU-510 Trimmer Unit

TU-510 Modes
The TU-510 has several modes for creating output, plus the ability to support sheets up to 51” in length with the MK-764. To learn more
about the TU-510’s functionalities, please refer to the TU-510 product guide.

Four-side Trimming (standard) 12” x 18” to 2-up 8.5” x 11” (standard) Business card (option) JS-507 & TU-504

Compatible paper sizes Compatible paper sizes Compatible paper sizes


5.51” x 6” to 13” x 51” 9.03” x 17.3” to 13” x 19.2” 12” x 18”
Compatible paper weight Compatible paper weight Compatible paper weight
50 - 400 gsm 50 - 400 gsm 177 - 300 gsm
Applications Applications Applications
Full-bleed brochures, fliers, sell sheets, 2-up letter, 2-up full-bleed letter for Business cards
posters brochures, fliers, etc.

Card cutting (option) TU-504 Creasing (option) CR-102/103 Perforation (option) PE-101/102
CR-102

Paper Surface

Paper Surface

CR-103

Compatible paper sizes Compatible paper sizes Compatible paper sizes


8.27” x 6.02” to 13” x 19” 5.51” x 6” to 13” x 51” 5.51” x 6” to 13” x 19.2”
Compatible paper weight Compatible paper weight Compatible paper weight
Uncoated: 128 - 300 gsm 80 - 400 gsm (up to 19.2” in length) 80 - 140 gsm
Coated: 157 - 300 gsm 128 - 300 gsm (19.2” to 51” in length) 100 - 160 gsm (uncoated)
Finished paper sizes Number of creases Perforation limits
3.35” x 5.24” to 6.02” x 9.09” 1 to 5 creases Paper feed direction (FD): 2
Center slitting Applications Cross feed direction (CD): 5
Gutter: 0.315” (8 mm) fixed Bi-fold or multi-panel brochures (prevents Applications
Number of slits: 1 or 2 cracking when folding) Coupons, checks
Applications
Postcards
40
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

LS-507 Large Capacity Stacker

Large-capacity stacker
A new 2 compartment system increases capacity and minimizes downtime since paper removal can be done while the engine is running.

The increase in maximum loading capacity and the adoption of a 2 compartment system has significantly increased the productivity
of the LS-507 large capacity stacker. The LS-507 receives the output paper into a back compartment which automatically delivers the
first 3000 sheets or complete print job forward to the front compartment which automatically outputs the received paper. This front
compartment can be off loaded while the engine continues to print.

This means that as long as the operator empties the front compartment the back compartment will not become full and stop,
substantially increasing productivity and minimizing downtime since the output can be off loaded while the engine is running. If the
output is not removed the total capacity of the LS-507 is 6000 sheets. The press can be configured with 2 LS-507s to further increase
productivity.

LS-506
Compartments (Existing machine: AccurioPress 3080) LS-507
Back — 3,000 sheets

Front 5,000 sheets 3,000 sheets

<Back>

Delivery to bottom
compartment

<Front>

Automatically output

41
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

LS-507 Large Capacity Stacker

Compartmentalized setting for stacking prohibition


The setting to prohibit stacking has been compartmentalized. It is now divided into front stacking prohibition ([Enable (Next)]) and rear
stacking prohibition ([Enable (Prev.)]). In the case of the existing machine’s LS-506, stacking prohibition would prohibit both stacking
before the job and stacking after the job. With the LS-507 of the AccurioPress C14000/C12000 series, the prohibited operation can now
be selected according to the status of the job, before or after the job in question.
– Front stacking prohibition: This setting prohibits stacking of the output of the current job when the output of a previous job is
already stacked (Setting: [Enable (Next)]).
– Rear stacking prohibition: This setting prohibits stacking of the output of a subsequent job on top of the output of the current
job. (Setting: [Enable (Prev.)]).

Front stacking prohibition Rear stacking prohibition


[Enable (Next)] [Enable (Prev.)]

Current Job Subsequent Job

Preceding Job Current Job

42
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

IQ-501 Intelligent Quality Optimizer

The functions of the Intelligent Quality Optimizer IQ-501 have been enhanced. The real-time adjustment function can now perform
vertical trapezoid distortion correction and horizontal trapezoid distortion correction.

– Enhancement of the real-time adjustment function


Images can be adjusted in real-time even during job execution by printing registration marks for position adjustment and patches
for tone adjustment on the paper cutting margin and scanning with the IQ-501.
By adjusting the image by comparing it to an adjustment chart, it is possible to achieve higher accuracy and print quality demanded by
users.

Real-time adjustment function

1. Print with registration marks/patches

2. Scanning by the IQ-501  Calculates


the amount of deviation from the target
value, and calculates the correction
value.

IQ-501 Main Engine

3. Provides correction values as feedback


and applies them to subsequent pages

43
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

IQ-501 Intelligent Quality Optimizer

Expansion of items for inspection


A spot and streak detection function, and variable data inspection for barcodes and serial numbers has been added.

– Spots: Both white and colored spots measuring 0.04 inches (1 mm) or more can be detected.
– Streaks: Streaks of 0.39 inches (10 mm) or more in length and 0.24 inches (6 mm) or less in width can be detected.
– Variable data inspection for barcodes and serial numbers: This function monitors the accuracy of printed variable data, such as
omissions and illegible barcodes or numerical data.
This prevents the user from missing printing problems such as spots, streaks, and errors in variable print output.

Spot Streak

Detectable range (length):


0.39 to 11.69 inches (10 to 297 mm)

Detectable range (diameter): Detectable range (width):


0.04 to 0.20 inches (1 to 5 mm) 0.04 to 0.24 inches (1 to 6 mm)

44
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070

IQ-501 Intelligent Quality Optimizer

Variable data inspection for barcodes and serial numbers


The IQ-501’s newest function enables it to monitor variable data jobs by reading each sheet using the scanners in the IQ-501 and OCR to
generate a CSV file that can be checked manually or with a third party solution. (Requires UK-301 and RU-702.)

– By specifying the variable area in the job settings, the IQ-501 can scan the output and do the following:
– Check whether barcodes and numbers are blank or not (real-time)
– Check whether numbers are in ascending or descending order (real-time)
– Output printed barcodes and numerical data as CSV files (a separate comparison application is required to check the data)
Numerical checks that normally would require visual checking can be automatically supported.

Image of variable printing

Normal printing part


(Not subject to variable printing inspection)

Numerical Value
(serial number, etc.)
1234567890 Variable part
(Target of inspection)
Barcodes

A CSV file is created using the


IQ-501’s scanner and OCR

45
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Key Options — AccurioPress C4080/C4070, AccurioPrint C4065

DF-713 Dual Scan Document Feeder

The DF-713 Dual Scan Document Feeder allows high-speed scanning and copying of documents.

Scan Speed by Resolution 200 dpi Color: Simplex 140 ipm Duplex 280 ipm
Monochrome: Simplex 140 ipm Duplex 280 ipm
300 dpi Color: Simplex 120 ipm Duplex 240 ipm
Monochrome: Simplex 120 ipm Duplex 240 ipm
400 dpi Color: Simplex 100 ipm Duplex 200 ipm
Monochrome: Simplex 100 ipm Duplex 200 ipm
Copy Speed 600 dpi Color: Simplex 75 ipm Duplex 150 ipm
Monochrome: Simplex 80 ipm Duplex 160 ipm

DF-713 Dual Scan Document Feeder


– High-speed scanning
– 300-sheet tray capacity
– UK-112 is strongly recommended for scanning and
copy of large jobs
– Without the UK-112 only 128 GB SSD
– Additional 2 TB (1 TB x 2) with UK-112 HDD

46
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Notes — AccurioPress C4080/C4070, AccurioPrint C4065

47
48
4. Advantages
This section explains the printer’s exceptional features
which give it an advantage in the market.

49
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Inline Color Management

Managing color quality and consistency


Like our competitors, Konica Minolta has a system in place to manage color quality and consistency. And while all our competitors can
produce great color without issue, the real challenge then becomes maintaining great image quality from the first to the last print of
a run of 100 or 10,000. If the first page out does not look like the last page out, then a job can become ruined costing a printer not just
money but time as well.

Konica Minolta’s production engines are able to create and maintain great image quality due to the Image Density Control (IDC), Color
Density Color (CDC), and IQ-501 Intelligent Quality Optimizer. Most of our competitors have some variation of a color management
system on their devices, but what makes Konica Minolta’s production print engines different is that we have a multi-step process, which
strategically checks the color consistency in the engine and outside the engine on any substrate indicated by the operator.

Linearization & calibration


In order to allow Konica Minolta’s production print engines to produce and maintain great image quality, the device must first be
linearized, and then calibrated to desire RIP (Raster Image Processor). Linearization is the process of setting the device to its optimal
output — the optimal output is a set color gamut provided by Konica Minolta.

Once the device is linearized, it can then be calibrated to the desired RIP. Calibration provides the fine tuning needed to set the machine
to a standardized or custom output. Both linearization and calibration set up the engine for accurate color.

Image density control


The IDC controls the toner to developer ratio that gives the potential for great color. Inside the engine, there is a densitometer that
measures the D-Max — density maximum, or maximum amount of toner — on the transfer belt.

As shown in the image below, the densitometer measures small patches of toner that are placed on the transfer belt in the gaps between
the sheets of paper. The engine then uses these measurements to adjust the toner to developer ratio to ensure the D-Max stays consistent
allowing for the potential for great color.

CMYK density patches are created


between images on the intermediate
transfer belt and are then read by the
IDC sensors.

Density Patches IDC Sensors

50
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Inline Color Management

Color density control (CDC)


The CDC, which is located outside the engine in the relay unit, uses a densitometer to measure the density of the toner on the substrate
being used for the job after it has been cooled and de-curled — the sheet is ready for finishing.

As shown in the image below, the CDC scans the color bars on several sheets of paper, measuring the density of the toner on each sheet.
By measuring the toner density on the sheet once it’s cooled and de-curled, the device is able to get a true measurement of the color
output on the substrate being used for the current job, unless the operator chooses to use a different substrate.

Color density control: IQ-501 vs RU

IQ-501 RU (Relay Unit)

Create 2 sheets 11 sheets


Color density control
9 sheets (precise)
Number of sheets Correct 2 sheets
3 sheets (standard)

Each paper type color adjustment 4 sheets 3 sheets

Color density control Scanner unit /2 Densitometer

Reading device Densitometer of RU


Scanner unit /2 &
External
Each paper type color adjustment spectrophotometer
spectrophotometer
(adjusts automatically)
(adjust manually)
Note: Color Density Control (CDC) - post fusing in either the relay unit (RU) or IQ-501.

51
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Inline Color Management

Intelligent quality optimizer IQ-501


With the IQ-501 Intelligent Quality Optimizer you are be able to: minimize variations in color and paper registration, reduce paper
waste, minimize manual intervention and the need for service; our customers now have the ability to automatically maintain color and
registration, in real-time, without the need for time consuming color management or highly trained employees. Which in turn means
more sellable sheets, greater productivity, uptime and profit.

Images can be adjusted in real time even during job execution by printing registration marks for position adjustment and patches for tone
adjustment on the paper cutting margin and scanning with the IQ-501. For jobs that do not have cutting margins, the IQ-501 measures
charts with gradation patches and crop marks that are output every 100 sheets or more. And now that the AccurioPress C4080 series
can adjust for trapezoidal and curve distortion the IQ-501 can execute real time adjustments for both vertical and horizontal trapezoid
distortion correction -- also known as bow correction.

The IQ-501’s abilities does not stop at just monitoring and adjusting registration and color in real-time. The IQ-501 can be configured with
Auto Inspection Technology which detects spots, streaks, and now the accuracy of printed variable data, such as omissions and illegible
bar codes or numerical data. This is down through the inspection unit, the UK-301, and an additional relay unit, which includes a purge
tray for sheets deemed unacceptable. Any sheet purged is then automatically reprinted as well as listed in a report which shows all image
quality issues found during the run. This ensures high quality and accurate output down to the page level, preventing missing defects
such as spots, streaks, and errors in variable print output.

IQ-501 workflow

Auto Package Color Calibration Proof / Visual Inspection Auto Inspection Technology Report
Adjustment Ensuring that devices Visual inspection is always Monitors output for spots,
Linearization of the engine; conform to a known recommended as quality is streaks (e.g. soilage); purges &
ensuring tone values from specification. subjective. reprints defective sheets.
0 - 100% are even. *Requires UK-301, RU-702

Before Run During Run After Run

Auto Quality Adjustment Auto Measure Real-Time Adjustment:


Through a series of charts, the Automatic front-to-back Periodical Adjustment & Auto Image Adjustment
IQ-501 checks for image quality registration function. Monitor and maintains both front-to-back
issues and makes any required registration and color consistency.
adjustments.

User Initiated Automatic

52
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Superb Image Quality

Maintaining and adhering to traditional quality


S.E.A.D. X Technology stands for Screen-Enhancing Active Digital Technology. This is Konica Minolta’s exclusive image processing
technology. S.E.A.D. X Technology controls all aspects of the image creation process by enabling devices such as the AccurioPress C4080
series to achieve unmatched levels of productivity, image quality, and color stability.

Konica Minolta’s unique Screen-Enhancing Active Digital system combines highly accurate exposure controls, precision pixel placement
and advanced screening to achieve high quality and resolution. It also allows flexible processing and image smoothing control to match
varying needs.

This is achieved through:


– Image Compression / Decompression Algorithm
– Edge Processing
– Improved Screen Quality
– Dot Position Control (DPC)

Image compression / decompression algorithm


As with all our competitors, we have a proprietary algorithm which efficiently compresses and decompresses images. With each iteration
of SEAD X, the algorithm is improved allowing for Konica Minolta’s print engines to output fantastic image quality efficiently and quickly.

Edge processing
The edge processing improves the appearance of characters no matter whether this concerns small fonts, thin characters or inverted
text. Character quality and legibility are top of the class. A line-thinning function helps prevent thickening of characters and blurring
of white characters. While a contour enhancement function reduces roughness on dot-background character edges and characters of
intermediate colors.

Moreover, the edge processing function comes with the engine body. Therefore, unlike competing machines that perform the processing
at the time of RIP, the AccurioPress C4080 series has the significant advantage that edge enhancement processing does not affect RIP
speed.

High print resolution, 8-bit gradation, and font edge detection and processing technology developed by Konica Minolta achieve best-
in-class character and thin line quality. Edge processing strength can be adjusted in 5 steps. This makes it easy to adjust the line width of
small characters and the readability of dot-background outline characters.

53
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Superb Image Quality

Edge processing examples

Offset Printing These are 5pt characters

Edge enhancement: OFF


Line thinning: OFF The characters are somewhat thick, and the outline characters are
Contour enhancement: OFF slightly blurred. Moreover, the dot-background outline characters
are also not clear.

Standard conditions
Line thinning: Normal Character quality is close to that of offset printing and dot-
Contour enhancement: Normal background outline characters are sharp thanks to edge
processing.

Line thinning set to maximum


Line thinning: Strong
The characters are clearly thinner compared with offset printing.
Contour enhancement: Normal
Line thinning can be set in 5 steps according to preference.

Contour enhancement set to maximum


The contour of dot-background outline characters is enhanced and
Line thinning: Normal
readability is improved compared with offset printing. Since small
Contour enhancement: Strong (+2)
characters have a black outline, a quality check is required when
using this setting.

54
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Superb Image Quality

Improved screen quality


Frequency Modulation (FM) screen processing fully leverages the print engines 3600 (equivalent) x 2400 dpi resolution by enhancing
resolution and granularity, eliminating jaggedness and moiré for smoother reproductions. In addition, the optimal screen processing
can also be selected to match the quality required for the output based on the dots and lines. As shown in the image below, there are six
dot screens, three line screens and three FM screens provided so the right screen can be selected for each material and purpose.

Dot position control


When printing texts and graphics, Konica Minolta’s production print engines are able to achieve resolutions equivalent to 3600 dpi by
2400 dpi (native resolution: 1200 x 2400) by using Dot Position Control, or DPC. This is done by processing individual pixels of 1200
dpi by controlling the dot mapping at the left, center and right resulting in an increased resolution of approximately 3 times (3600 dpi
equivalent).
1200 dpi
1 1. From the left 2. From the center 3. From the right

1 pixel

DPC controls the printing of the dots in three drawing patterns according to the relationship of each dot to its neighbor and the dot
generation pattern. This technology not only enables drawing of smoother outlines of lines and text, but also through screen
processing it enables the reproduction of more precise gradations as seen below.

Illustration of dot generation with a multibit screening


1-bit 8-bit Without DPC 8-bit With DPC

DPC can only draw in one dot Can draw in units of less than Can draw finer than one dot.
units. one dot, but cannot adjust Takes the positional
the positional relationships relationship with adjacent
between adjacent dots. dots into account and draws
the image in suitable areas.

Original dot 1 bit dither Multibit screening Multibit screening


(Without DPC) (With DPC)

55
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Curl Correction

Real-time curl adjustment


Relay Unit RU-518m is equipped with a real-time curl adjustment function that enables curl adjustment even during printing.

– Real-time curl adjustment is possible


– Fine curl adjustment is possible
– Equipped with paper cooling function

Humidifying decurling mechanism [HM-103]


– Static elimination
– Coated paper humidification capability
– Roller pressure cancellation
– Coated paper/high-humidification capability
– Variable humidification level
– Improved cooling performance
– Hollow pipe + interior and exterior fans

Mechanical decurling mechanism


– Real-time adjustment function
– Remote operation with the control panel
of the main unit
– Improved curl correction
– Belt + Smaller stroking roller diameter
– Multi-stage winding path switch over

56
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Simitri HDE

One of the Konica Minolta’s print engine’s definitive advantages is unsurpassed


print/copy quality — an area in which Konica Minolta has long been recognized as
an industry leader.

Since the 1970s, Konica Minolta has been investing heavily in toner technology to improve image quality, decrease running costs,
and minimize environmental impact. By the year 2000, we had developed our own patented polymerization production process for
toner called SimitriTM, which uses plant-based resources (Biomass). All four colors — cyan, magenta, yellow and black, use plant-based
resources. In 2014, we took this revolutionary technology a step further by introducing Simitri HDE (High Definition Enhanced) toner.

To understand Simitri HDE toner’s advantages, let’s take a look at how it’s created.

Creating smaller, more uniform toner particles


The goal of toner production is small, uniform particles because — the smaller the toner particles and the more uniform the shape, the
finder the lines and sharper the image and text it can reproduce. Small size and uniform shape also improve half-tones’ reproduction,
resulting in more natural photos and higher quality illustrations.

The conventional pulverization process creates large, irregularly shaped toner particles due to high-speed grinding within the toner
production cycle. After being heated, melted, and cooled, the plastic toner particles are blown against a wall and crashed into pieces.
These pieces become the toner particles.

In Konica Minolta’s Simitri HDE polymerized method, color pigments and raw materials composed of plastic are coupled through a
chemical reaction to produce toner particles. This method produces smaller, more uniformly shaped particles of polymerized toner

Conventional Coloring Powder


Toner Resin
Production
Process Dry Mixing, Heating High-speed Classifying Process
and Kneading Grinding (by size)

Commericialization
Cooling

Taken back in to raw material

In Konica Minolta’s Simitri HDE polymerized toner, color pigments and raw materials composed of plastic are coupled through a chemical
reaction to produce toner particles. This method creates smaller, more uniformly shaped particles of polymerized toner.
Colorant
Particle

Resin
Particle

57
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Simitri HDE

Konica Minolta creates Simitri polymerized toner through a process combining the following three steps.

In Step 1: Color pigments are dispersed in water (aqueous solution).


In Step 2: The resin molecules (monomer) are bonded in the water to create ultra-small resin particles approximately 100 nanometers
in size — about one ten-millionth of an inch.
In Step 3: The color pigments and ultra-small resin particles are then chemically condensed and fused together.
Production Method of Polymerized Toner

Step 1

Colored Monomer
(Raw Materials of Resin)
Particles
Initiator

Step 2
Dispersion of Colorant in Water

Step 3

Polymerization Process

These microscopic images reveal the difference between conventional pulverized toner particles. The smooth, uniform particles of Konica
Minolta Simitri HDE toner can be clearly seen.

Side-by-side photos of Simitri HDE (left) and Pulverized


Toner Particles (right).

The illustration above shows a particle size comparison: the average size (diameter or (phi)) of Simitri HDE toner particles is 6.5μm
(micrometer = one-thousandth of a millimeter), whereas the average size of pulverized toner particles is 8μm. The shape of Simitri HDE
toner particles is more uniform than that of pulverized toner.

Toner φ : 8 μm
Toner φ : 6.5 μm Side-by-side illustration of Simitri HDE (left)
and Pulverized Toner (right) particles layered
on paper.
Paper Paper

Simitri HDE Pulverized Toner


Polymerized toner

58
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Simitri HDE

Superb image quality and brilliant, vivid colors


Konica Minolta Simitri HDE toner’s superb image quality begins with its ability to reproduce fine lines and small text more clearly
and create halftones with smoother gradations. Because Simitri HDE toner particles are smaller and more uniform in shape, they can
reproduce text without jagged contours and create print with brilliant sharpness.

CLEAR SHARP SHARP


DOTS LINES TEXT

Conventional
Toner

Simitri HDE
Polymeriszed
Toner

This sharpness is even more noticeable when making copies because Simitri HDE toner particles create vivid colors closer to the original
photo prints. Simitri HDE toner particles also reproduce a wider color gamut or a specified range of color. The smooth dispersion of color
pigments results in color images with bright, vivid colors across a variety of hues, enabling Konica Minolta’s print engines to reproduce a
broader range of colors than standard offset printing equipment.

Simitri HDE toner features:


– Improved reproduction of bronze-red and skin tones – Enhanced fade resistance, improved light resistance
– Extended color gamut of magenta – Lower melt point also contributes to enhanced
– Granularity improved (specifically black - smoother productivity on heavier stocks
grayscale)

59
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Simitri HDE

Outstanding resistance to color fading


Due to the strong bonding of its color pigment particles, Simitri HDE toner is exceptionally resistant to color fading. With normal
commercial printing, ultraviolet rays can sometimes fade yellow colors. Prints and copies produced with Simitri HDE toner can resist
these ultraviolet rays more effectively and preserve their color quality far longer.

Side-by-side images of
orginal and “after
exposure” in both Simitri
HDE toner (left) and
Offset Printing (right)

After exposure The original After exposure The original

The advantages of oil-less fusing


Konica Minolta technology adds another advantage to Simitri HDE toner. By including wax in the toner manufacturing process, we
benefit from “oil-less fusing,” making it unnecessary to apply silicone oil to the heater during the fusing process. This solves the problem
of “white-line noise” caused by dust adhering to the optical system because of the oil’s vapor. Since the fusing unit does not use fuser oil,
its life is prolonged. This makes Konica Minolta’s print engine more reliable, reducing maintenance and increasing uptime.

Konica Minolta adopts a special polymerization method in which wax is dissolved in the monomer (raw material of resin), then emulsified
and dispersed into water (aqueous solution) to create particles. This cohesion and fusion of particles and color pigments make it possible
to contain a large amount of wax evenly, yielding a polymerized toner that can fuse without oil.

The benefits of low-temperature fusing


In addition to oil-less fusing, Simitri HDE toner particles can also be fused at much lower temperatures than conventional pulverized
toner particles. Low-temperature fusing reduces paper curling or jamming during the finishing process. Less paper curl means a thinner
stack of prints or copies to be stapled or stitched — a significant advantage when finishing large quantities of documents.

In conventional toner fuser processes that require higher fusing temperatures, thick paper can absorb heat while being fused and cause
the fusing temperature on the roller to decrease. This will degrade the fusing ability of the toner to the paper, affecting image quality.
With its ability to fuse to paper at a lower temperature, Simitri HDE toner enables Konica Minolta’s print engines to handle a greater range
of paper types in a wider range of thicknesses.

Fusing temperature and fusing pressure go hand in hand: lower the fusing temperature, and the fusing pressure can also be lowered.
When the fusing pressure is lowered, even thin paper that would typically wrinkle will print more reliability when used in Konica Minolta’s
print engines.

60
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Simitri HDE

AccurioPress C4080 series’ Auto-Refining Developing System


Like its predecessor, the AccurioPress C3080 series, the AccurioPress C4080 series’ toner contains the developer’s carrier. The carrier
refreshes the carrier in the developer through the “auto-refining developing system.” This stabilizes the developer, ensuring the
production of high-quality images. The addition of the carrier also helps increase uptime by decreasing the carrier’s deterioration as a
whole. This means longer duty cycles than similar class devices, reducing the frequency of developer replace and increasing uptime.

61
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Registration Mechanism

A high-precision registration mechanism that combines a conventional paper-curvature detection/automatic adjustment mechanism
with an intermediate transport roller nip release mechanism and a skew adjustment mechanism for the registration unit. This achieves
high precision front-to-back registration accuracy.

62
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Advantages — AccurioPress C4080/C4070, AccurioPrint C4065

Vacuum Feed Paper Deck

Use of air suction system


Air suction belt feeding is used for PF-707m. In addition to side air with the air assist function, air is blown from the front to cause the
paper to adhere to the suction belt and be conveyed.

More stable paper feeding, even for thick paper and coated paper, is achieved through optimal air control according to the paper type,
and through improvement of the crimping area during belt feeding.

Compared with conventional paper transport systems, this air suction system improves small-sized paper transport performance. In
addition, the ability to handle thin paper such as coated paper of 64 gsm is improved.

The air suction system reliably feeds thick paper presenting a heavy paper feeding load as well as coated paper.

Advantages of Suction
Paper Feeding
— Prevents misfeeding as it
is less affected by paper
dust
— The long maintenance
cycle ensures reduced
down time.

63
64
5. Demo Script
This section provides an example demo script for the
AccurioPress C4080/C4070 and AccurioPrint C4065

65
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Demo Script — AccurioPress C4080/C4070, AccurioPrint C4065

The following is an example of a demo script for the AccurioPress C4080 series. This script provides a general overview of the new features
as compared to the C3080 series. Feel free to use any or all of this script for your demos. Keep in mind this script is a general overview,
and for a demo to be effective, you must customize it to fit the customer’s needs.

The AccurioPress C4080 series, an all-in-one print manufacturing powerhouse featuring advanced
automation and unmatched versatility. This new press offers ease of use in one compact, affordable
footprint, opening up new opportunities to expand your business.

AccurioPress C4080/C4070
The AccurioPress C4080 series includes both the C4080 and C4070 and delivers output at lightning
speeds of 80 and 70 prints per minute and maintains rated speeds up to 216 gsm. Coupled with
2-sided printing of sheets up to 34 inches in length, envelope printing with the standard fuser at
half-rated speeds, or full-speeds with a dedicated envelope fuser, and a comprehensive array of
finishing options, the AccurioPress C4080 series opens up a new world of opportunities for small to
medium commercial print and graphic communications providers.

The C4080 series output resolution is 3600 (equivalent) by 2400 dpi with 8 bit processing, an increase
from its predecessor. The AccurioPress C3080 series output resolution of 3600 (equivalent) by 1200
dpi. With Konica Minolta’s Simitri HDE toner and industry-leading image processing technology, the
C4080 series continues to provide beautiful image quality for even the most demanding customer.

Productivity starts with the paper input. The AccurioPress C4080 series has several paper feed
configurations available to meet the needs of your business. This press supports coated and
uncoated media from 62 - 360 gsm in weight, ranging in size from just under 4 by 6 inches to 13
by 19.2 inches, and 13 by 51 inches when configured with a long sheet input option. Plus, several
paper feed options can handle envelopes.

The C4080 is configurable with up to 3 vacuum fed paper feed units that hold up to 13,890 sheets
at 80 gsm. Add the additional 1,500 sheets that the two main engine trays hold; you get a maximum
capacity of 15,390 sheets. For runs requiring sheets longer than 19.2 inches, there is a large capacity
air-assisted paper feed unit to support sheets up to 30 inches in length at up to 300 gsm. This large
capacity paper feed unit can hold up to 1,000 sheets of 128 gsm media. There is also a bypass tray
available to handle all sizes of media up to 13 by 51 inches.

Put all this together with the C4080 series’s ability to print envelopes with the standard fuser at half-
rated speeds or full-rated speeds with a dedicated envelope fuser. And the ability to simplex sheets
up to 51 inches in length and auto-duplex sheets up to 34 inches in length, you get one productive,
versatile device. This allows print service providers the ability to seamlessly transition from one
print job to the next and to offer new types of digitally printed output such as 8-panel, double gate
folded brochures, book jackets, short run envelopes and more. These types of products were once
only possible with offset printing.

66
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Demo Script — AccurioPress C4080/C4070, AccurioPrint C4065

Options
The AccurioPress C4080 brings automation to a new level starting with the new IM-101 Intelligent
Media Sensor. This optional external media detection sensor takes the guesswork out of identifying
media. Especially that media that may be sitting out and no longer have the product label attached.
The IM-101 Intelligent Media Sensor has sensors for paper weight, surface and thickness. It
measures the media’s weight and type, and provides the operator with a list of suggested media
based on paper type and weight, and matching paper profiles. This ensures that the media is
properly set, guaranteeing the best output quality.

Bringing quality automation to a new level is the IQ-501 Intelligent Quality Optimizer, a closed-loop
inline quality management system. Not only does the IQ-501 significantly reduce the amount of
time and skill required to set up a digital press before a run, but it also monitors and maintains color
consistency and front-to-back registration during an entire print run.

As an extra set of eyes, the IQ-501’s Auto Inspection Technology can also monitor for image quality
defects such as spots, streaks, or missing images and alert the user of any errors. With the addition of
Variable Data Inspection for Barcodes and Serial Numbers, the IQ-501 can generate a data file using
scanning technology to read each sheet to ensure the variable data job is printed in its entirety.

The IQ-501 ensures high-quality output from the first sheet out to the last while decreasing the
amount of waste, plus allowing operators to multitask and be more productive as the device does
not need to be continuously monitored. Which, in turn, means more sellable sheets, greater
productivity, increased uptime, and profit.

The AccurioPress line of digital presses features numerous finishing options for producing
professional-quality full-bleed saddle stitch booklets, perfect bound and wire bound books, as well
as options for stapling, punching, folding, and stacking. And unique to Konica Minolta is the inline
trimming unit, the TU-510.

Introduced with the AccurioPress C14000 series, the TU-510 inline trimmer unit is available with
the AccurioPress C4080 series. Full-bleed, finished output, ready-to-box, has never been easier.
This revolutionary inline trimmer offers advanced automation delivering fully-trimmed, full-bleed
brochures, fliers, postcards, business cards, and more directly to the output tray. This inline trimmer
unit creates sophisticated, professional documents ready for delivery to your customer in the time
it takes to print them.

Cutting and top and bottom slitting come standard on the TU-510 trimmer unit. This inline
finishing unit is also configurable with options for valley and mountain creasing, perforation in
both directions, and options for card cutting such as center slitting and a business card catch tray.
A modular design, these units can easily be exchanged depending on the output needed. Plus, with
the additional option supporting long sheets, the TU-510 can support the delivery of fully-trimmed
and creased long sheets of up to 51 inches to the output tray.

67
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Demo Script — AccurioPress C4080/C4070, AccurioPrint C4065

Think about it. The C4080 series’ ability to print 2-sided sheets up to 34 inches and the TU-510’s
finishing abilities means fully-trimmed and creased 8-panel brochures can be delivered to the
output tray. They only need folding and are ready to be boxed and delivered. No other press in its
class can do that.

All these options give you the ability to produce fully-finished, high quality, ready to be boxed
output quickly and easily without skilled operators -- equaling increased uptime, productivity,
quality, and profit.

And for print service providers looking for high-volume flat sheet output, the LS-507 large-capacity
stacker is available. This new stacker can hold up to 6,000 sheets of 80 gsm media and can be
unloaded up to 3,000 sheets at a time while the engine is running, allowing for long uninterrupted
runs.

DFEs
The AccurioPress C4080 series has several digital-front ends to choose from, the first being Konica
Minolta’s image controller, the IC-609. Perfect for print service providers looking for centralized
job management at the control panel or a workstation, the IC-609 offers an intuitive interface and
comes standard with job and color management utilities at no additional cost. This system offers
powerful job processing at a very economical price.

Konica Minolta continues our partnership with EFI with two Fiery image controller options,the
IC-317 server based controller and the bustled IC-419. An excellent fit for print service provides
looking to manage jobs across multiple devices in one centralized place. Both controllers take
advantage of EFIs powerful color and workflow solutions to integrate with existing equipment and
meet any workflow needs.

AccurioPrint C4065
With all this talk about the AccurioPress C4080 and C4070, I do not want to forget the new
AccurioPrint C4065. Replacing the AccurioPrint C3070L, the C4065 runs at 65 color prints per
minute and 80 black and white prints per minute. The C4065 supports the same media weights,
types, sizes as the C4080 and C4070; this includes media up to 360 gsm in weight, auto-duplexing
sheets up to 34 inches in length, and printing envelopes with the standard fuser at half rated-
speeds. The IC-607 Konica Minolta image controller and EFI’s IC-419 are available for this press. And
while there are some limitations to finishing options, the AccurioPrint C4065 is configurable with
an all-in-one finisher allowing for saddle stitch booklets, stapling, and punching, making it a great
fit for smaller print for pays, CRDs, marketing departments or any office environment requiring
great color, advanced media capabilities and more..

68
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Demo Script — AccurioPress C4080/C4070, AccurioPrint C4065

Conclusion
The versatility, productivity, and advanced automation of the AccurioPress C4080, C4070, and
AccurioPrint C4065 will provide you with opportunities for new revenue streams and increased
profits. An all-in-one print manufacturing powerhouse, the AccurioPress C4080 series is an easy
choice for any business.

69
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Color Production Print — Device Basics Comparison

AccurioPress AccurioPrint
C14000 C12000 C6100 C6085 C4080 C4070 C4065
Monthly Duty Cycle 2,500,000 2,200,000 1,800,000 1,530,000 864,000 758,000 702,000
Productivity (LTR) 138.1 118.4 100 85 80 70 65
Rated-Speeds All weights All weights Up to 216 gsm
Resolution 3600 (equiv.) x 2400 dpi 3600 (equiv.) x 1200 dpi 3600 (equiv.) x 2400 dpi
3.94” x 5.5” 3.94” x 5.5” 3.94” x 5.83”
Min.
(100 x 139.7 mm) (100 x 139.7 mm) (100 x 148 mm)
Paper Size
13” x 19.2” 13” x 19.2” 13” x 19.2”
Max.
(330.2 x 487.7 mm) (330.2 x 487.7 mm) (330.2 x 487.7 mm)

Paper Weight 52 - 450 gsm 52 - 400 gsm 62 - 300 gsm


Simplex 51” (1300 mm) 51” (1300 mm) 51” (1300 mm)
Banner
Duplex 35.4” (900 mm) 30” ( 762 mm) 34” (864 mm)
Sheets
Weight Up to 300 gsm Up to 300 gsm Up to 300 gsm
w/ Std Fuser Yes, 1/2 speed No Yes, 1/2 speed
Envelopes
Opt. Fuser EF-106 EF-104 EF-107
EFI IC-319 EFI IC-315
EFI IC-317
EFI IC-318 EFI IC-313 EFI IC-419
DFE Options EFI IC-419
Creo IC-316 Creo IC-314 KM IC-607
KM IC-609
KM IC-610 KM IC-604
45.3” x 36.7” x 63.8” 37.4” x 37.4” x 51.9” 31.5” x 35.6” x 42.4”
Dimensions (W x D x H)
(1151 x 932 x 1620 mm) (950 x 950 x 1319 mm) (800 x 903 x 1076 mm)

Approximate Weight 1234.6 lbs (560 kg) 970 lbs (440 kg) 696.7 lbs (316 kg)

70
Product Guide
AccurioPress C4080/C4070, AccurioPrint C4065

Revisions — AccurioPress C4080/C4070, AccurioPrint C4065

Date Revision
02/01/2021 Corrected sheet capacity for FS-532
(page 9)
Corrected explanation of toner (page 12)

71
PARTNERSHIP.
Konica Minolta can help give shape to your ideas and partner with you to achieve your corporate objectives.
Contact us to realize opportunities in:

INFORMATION MANAGEMENT IT SERVICES TECHNOLOGY


Enterprise Content Management (ECM) Application Services Office Multifunction Business Solutions
Document Management Cloud Services Commercial and Production Printers
Automated Workflow Solutions IT Security Industrial Printers
Business Process Automation Managed IT Services Wide Format Printers
Security and Compliance 3D Printers
IT Consulting & Projects
Mobility Scanners
Apple Managed Services
eDiscovery Services Security Surveillance Systems MBM Technology Solutions
Managed Voice Services Laptops, Desktops and Computer Hardware 375 Robbins Drive, Troy, MI 48083
Technology Implementation 248.597.1095
Servers and Networking Equipment
and Deployment www.MBMsolutions.com
Managed Print Services (MPS)
Managed Enterprise Services

KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC.


For complete information on Konica Minolta products and solutions, 100 Williams Drive, Ramsey, New Jersey 07446
please visit: CountOnKonicaMinolta.com
CountOnKonicaMinolta.com
KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC.
100 Williams Drive, Ramsey, New Jersey 07446

CountOnKonicaMinolta.com
Item #: 00000000000
©2020
© 2019KONICA
KONICAMINOLTA
MINOLTABUSINESS
BUSINESSSOLUTIONS
SOLUTIONSU.S.A.,
U.S.A.,INC.
INC.All rights reserved. Reproduction in whole or in part without written permission 02/19-T
is prohibited. KONICA MINOLTA, the KONICA MINOLTA logo, bizhub and Giving Shape to Ideas are registered trademarks or trademarks of KONICA
MINOLTA, INC. All other product and brand names are trademarks or registered trademarks of their respective companies or organizations.
All features and functions described here may not be available on some products. Design & specifications are subject to change without notice. 12

You might also like