Scribd
Upload
44 views1 page

PPDB en Us A4

This document summarizes a pilot-operated pressure reducing/relieving valve. The valve reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port, while also providing full-flow relief from the outlet port to tank. It has adjustment ranges from 50-5000 psi, a flow rate of up to 10 gpm, and available seal materials of Buna, EPDM, polyurethane and Viton.

Uploaded by

Felipe Diaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views1 page

PPDB en Us A4

This document summarizes a pilot-operated pressure reducing/relieving valve. The valve reduces a high primary pressure at the inlet to a constant reduced pressure at the outlet port, while also providing full-flow relief from the outlet port to tank. It has adjustment ranges from 50-5000 psi, a flow rate of up to 10 gpm, and available seal materials of Buna, EPDM, polyurethane and Viton.

Uploaded by

Felipe Diaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MODEL Pilot-operated, pressure reducing/relieving valve

PPDB SERIES 1 / CAPACITY: 10 gpm / CAVITY: T-11A

sunhydraulics.com/model/PPDB

Pilot-operated, pressure reducing/relieving valves reduce a high primary pressure at the inlet (port 2) to a constant
reduced pressure at port 1, with a full-flow relief function from port 1 to tank (port 3).

TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

Factory Pressure Settings Established at blocked control port (dead headed)


Maximum Operating Pressure 5000 psi
Control Pilot Flow 7 - 10 in³/min.
Adjustment - No. of CW Turns from Min. to Max. setting 5
Locknut Hex Size 9/16 in.
Locknut Torque 80 - 90 lbf in.
Seal kit - Cartridge Buna: 990011007
Seal kit - Cartridge EPDM: 990011014
Seal kit - Cartridge Polyurethane: 990011002
Seal kit - Cartridge Viton: 990011006

NOTES Maximum pressure differentials for spring ranges: A and B are 3000 psi (210 bar) N and Q are 2000 psi (140 bar) W is 5000 psi (350 bar)inlet pressure
For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.

CONFIGURATION OPTIONS Model Code Example: PPDBLAN


CONTROL (L) ADJUSTMENT RANGE (A) SEAL MATERIAL (N) MATERIAL/COATING
L Standard Screw Adjustment A 100 - 3000 psi (7 - 210 bar), 200 psi (14 N Buna-N Standard Material/Coating
C Tamper Resistant - Factory Set bar) Standard Setting V Viton /AP Stainless Steel, Passivated
K Handknob W 150 - 4500 psi (10,5 - 315 bar), 200 psi /LH Mild Steel, Zinc-Nickel
Y Tri-Grip Handknob (14 bar) Standard Setting
B 50 - 1500 psi (3,5 - 105 bar), 200 psi
(14 bar) Standard Setting
N 60 - 800 psi (4 - 55 bar), 200 psi (14
bar) Standard Setting
Q 60 - 400 psi (4 - 28 bar), 200 psi (14
bar) Standard Setting

c 2022 Sun Hydraulics 1 of 1

You might also like