DepShop Official Guide

Sharing of this document with persons outside DepShop is strictly prohibited and
may lead to repercussions.
Revised 1-15-2024

© 2023 DepShop
 START HERE FOR ALL PRODUCTS:
These instructions take about 5 minutes to complete and are required for all products. Do the
setups for Windows first and then the BIOS setup. These instructions will not permanently
change your system and are easily reverted back to their original state after you are done using
any product.

Step One: WINDOWS SYSTEM SETTINGS

1. Start menu > type winver.
a. Check what versions are supported on your product page!
b. Go here to swap versions if needed.

2. Start menu > search Virus & threat protection

a. For Windows 11, you must turn off tamper protection
before realtime protection.
b. Disable “Windows 10 Real-time protection”.

3. Start menu > search Smart screen

a. Disable “Windows 10 Exploit Protection” options.
b. Disable “Windows 10 Reputation-based Protection”.
c. Make sure it looks like this.

4. Download the DepShop Tool

a. Disable Windows Updates.
b. Disable Windows Defender.

5. Start menu > search UAC

a. Set to Never Notify

6. Remove Valorant Vanguard, FACEIT, any antivirus software.

7. Follow windows 10: this video windows 11: this video if you need help and follow the one
below too!

Step Two: BIOS

8. Disable Secure Boot and remove security keys.
a. Follow this 1 minute video we made

© 2023 DepShop
TABLE OF CONTENTS
PRODUCTS IN THIS DOCUMENT:

(Click on product name to jump to page)

TABLE OF CONTENTS.............................................................................................................................................. 3

ALPHA (INTEL ONLY) .............................................................................................................................................. 4

CARBON ................................................................................................................................................................. 6

DEPSHOP X / DEPSHOP X ESP ................................................................................................................................ 7

DOPAMINE ............................................................................................................................................................ 9

ECHO ................................................................................................................................................................... 10

ESP ONLY ............................................................................................................................................................. 11

KGB ...................................................................................................................................................................... 12

LIGMA .................................................................................................................................................................. 13

RADAR HEADEYES ................................................................................................................................................ 14

ROCKETLEAUGE ROIDS......................................................................................................................................... 15

VECTOR................................................................................................................................................................ 16

VEGA ................................................................................................................................................................... 17

WRATH SPOOFER ................................................................................................................................................. 18

WARTHUNDER EAC .............................................................................................................................................. 19

X-RAY ................................................................................................................................................................... 20

© 2023 DepShop
ALPHA (INTEL ONLY)
https://deprimereshop.com/shop/escape-from-tarkov/alpha/escape-from-tarkov-alpha/

INSTRUCTIONS:
1. Follow Page 2 of this document!
2. Video if you can’t read https://youtu.be/XDl8HINClKg
3. Disable all overlays (Geforce Experience, MSI Afterburner, Xbox Gamebar, Discord, Steam, etc)
4. DEPSHOP RECOMMENDS NOT USING BUILT-IN SPOOFER.
5. You must remove any pin and/or password on your Windows user account.
6. You must have GPT structure on your disk drive, not MBR.
- Open CMD > enter diskpart > enter list disk > validate your Windows drive is GPT

- Click here to change to GPT

- If Windows doesn't boot, set BIOS mode from Legacy + UEFI to be UEFI only

BIOS
7. Ensure in your BIOS:
UEFI ENABLED
Intel Virtualization (VT-X and VTD) ENABLED
CSM OFF/OTHER OS
Secure Boot DISABLED
- If you can’t disable secure boot, DELETE the security keys instead.
Google your motherboard for a guide if needed.
- If virtualization is ON in BIOS but showing RED/OFF in Alpha tab in
DepShop Tool:
In admin powershell type: bcdedit /set hypervisorlaunchtype off
Loader
1. Run loader as Admin
2. Paste your Key and click Login
3. Select Ur game and hit Load
4. PC Will Reboot now
5. After Reboot Start ur Game
6. Press DELETE to open the menu.
In Menu > General, youll see a hotkey for close cheat that KILLS the menu.
I highly recommend that you bind this to F12 or an unused key to avoid accidently
closing.
FIXES:
Performance issues:
- Disable Overclocking, remove any XMP profiles, validate your HDD is in GPT format.

Object reference error:

1. Go into C:\Users%username%\AppData\Local\Battlestate
Games\BsgLauncher\cerfcache
- delete everything inside

© 2023 DepShop
 2. Clear your game cache in the launcher
3. If that doesnt solve; repeat and check game file integrity as well
4. Repeat as needed

Alpha BSOD after restarting

Run these commands:
DISM /Online /Cleanup-Image /CheckHealth
DISM /Online /Cleanup-Image /ScanHealth
DISM /Online /Cleanup-Image /RestoreHealth
sfc /scannow
Set windows virtual memory based on your RAM.
8GB 2000 MB
16GB 4000 MB
32GB 16000 MB
64GB 32000 MB

© 2023 DepShop
CARBON
https://deprimereshop.com/shop/rust/carbon/rust-carbon/

INSTRUCTIONS:
Loader
1. First - Enter the game and set it to borderless. The exit the launcher and game.
2. In the guide follow pages 2-3 (100%)
3. Open the loader as 'Administrator' and proceed to enter your key and click load, from there pick
the game and now at the bottom it will say "waiting for game"
4. From here if you’re spoofing you would load up your spoofer and spoof.
5. Open game launcher as 'Administrator' and start game. Once you’re at the in-game menu,
carbon menu will show up. If not showing up, press INSERT.
NOTE: Squad requires the game to be running in directx11

Troubleshoot: If you see no esp, make sure you have clicked it (LEFT Click to raise the range of how far
and RIGHT Click to lower).

© 2023 DepShop
DEPSHOP X / DEPSHOP X ESP
https://deprimereshop.com/shop/escape-from-tarkov/depshop/escape-from-tarkov-depshop/
https://deprimereshop.com/shop/escape-from-tarkov/depshop/escape-from-tarkov-depshop-x-esp-only/

INSTRUCTIONS:
1. Disable all overlays (Geforce Experience, MSI Afterburner, Xbox Gamebar, Discord, Steam, etc)
2. You must remove any pin and/or password on your Windows user account.
3. You must have GPT structure on your disk drive, not MBR.
a. - Open CMD > enter diskpart > enter list disk > validate your Windows drive is GPT

b. Click here how to change from Legacy BIOS to UEFI

c. If Windows doesn't boot, set BIOS mode from Legacy + UEFI to be UEFI only
BIOS
4. Ensure in your BIOS:
UEFI: Enabled
Intel Virtualization (VT-X and VTD) for INTEL CPU: Enabled
SVM for AMD CPU: Enabled
CSM: OFF/OTHER OS
Secure Boot: Disabled
If you can’t disable secure boot, DELETE the security keys instead. Google your
motherboard for a guide if needed.

Prior to Launching the Loader:

5. Join our Discord: https://deprimereshop.com/discord
6. Open a Support ticket in our Discord.
7. In the Ticket type: /loader ENTERYOURKEYHERE (replace the ENTERYOURKEYHERE with your
actual key)
8. A unique Loader for you gets generated which you can use.

Loader:
9. You need to have Stream labs installed, download link: https://streamlabs.com/streamlabs-
desktop/download?sdb=1
10. Run Loader, login with key and hit Load Hypervisor
11. After PC restart open Stream labs
12. Go into Stream labs settings and set a Hotkey for In-Game Overlay (Follow Screenshots below)

© 2023 DepShop
13. Spoof now (if you use a spoofer)
14. Open BSG Launcher followed by Escape from Tarkov.
15. Once in Main menu hit your Stream labs overlay hotkey which you previously set.
16. You should now see a Black Window popping up.
17. Open DepX Loader, login with key and hit Load Cheat.
18. Successful injection shows Text in top Left corner.
19. Menu Hotkey is INSERT
20. Hitting Stream labs Overlay key is working as panic key = killing cheat
21. If you want to play again after closing the Game (as long you didn’t restart PC, if you restarted PC
start at Step 11), hit your Stream labs overlay key to uninject/kill the cheat, Reopen Game and
follow from Step 16

© 2023 DepShop
DOPAMINE
INSTRUCTIONS:

IMPORTANT!!!!
1. USB storage device required!
2. Make sure you have followed Page 2 of this Guide before you continue here!
3. VBS/Hyper-V must be disabled.
a. To disable Hyper-V in Windows, copy and paste this command as Admin in CMD:
bcdedit /set hypervisorlaunchtype off

USB:
4. Format your USB drive as FAT32.
5. Go to https://dashboard.dopamine.clinic/ on GOOGLE CHROME ONLY and register an account
with your key.
a. To get your machine info, hit the "Download" button on the right.
b. Paste the results into the Machine Info field.
6. Download bootx64.eft file from the ‘USB Loader’ tab on the website.
7. On your USB in windows
a. Create a folder called EFI.
b. Open that folder and create a new folder called Boot.
c. and place your "bootx64.efi" inside of that second folder.
It should be (D:\EFI\Boot\bootx64.efi).

BIOS:
8. Go into your BIOS settings in your motherboard.
9. Change boot order. Make UEFI:USB as priority #1 and Windows Boot Manager as priorioty #2
10. Disable Fast Boot.
11. Save settings and exit, PC will restart.

Loader:
12. After you have done the steps above you should now see something like GREEN MATRIX text.
13. If you dont see this, double check your USB setup and Boot priority settings.

Injecting the Cheese:

14. Go to LAUNCHER tab and you should see this.
15. If you are going to spoof:
a. Click the Hardware Spoofer picture. You
should see a pop up saying “successful”.
16. Open game, wait until you are in the main menu.
17. Go back to the website and click on the Rust picture.
This injects the cheat.
18. If it fails, refresh the webpage and try again.

© 2023 DepShop
ECHO
INSTRUCTIONS:
Loader
1. Put the client on a removable usb stick and start it as administrator.
2. Log in using your website credentials.
3. Click your product
4. Wait for the client to close.
5. Start the game and wait 60 seconds in the main menu until the menu appears.
6. You can open and close the menu with the "insert" key.

© 2023 DepShop
ESP ONLY
https://deprimereshop.com/shop/escape-from-tarkov/esp/escape-from-tarkov-esp/

INSTRUCTIONS:
Loader
19. First - Enter the game and set it to borderless. The exit the launcher and game.
20. In the guide follow pages 2-3 (100%)
21. Open the loader as 'Administrator' and proceed to enter your key and click load, from there pick
the game and now at the bottom it will say "waiting for game"
22. From here if your spoofing you would load up your spoofer and spoof.
23. Open game launcher as 'Administrator' and start game. Once your at the in-game menu, carbon
menu will show up. If not showing up, press INSERT.

Troubleshoot: If you see no esp, make sure you have clicked it (LEFT Click to raise the range of how far
and RIGHT Click to lower).

© 2023 DepShop
KGB
https://deprimereshop.com/shop/escape-from-tarkov/kgb/escape-from-tarkov-kgb-rage/

INSTRUCTIONS:

Loader
1. Steam must be running. Have Steam open the entire time.
2. Place the bootloader in any folder of your choice (not on the desktop).
3. Open the loader (called Onedrive.exe) as Admin.
4. Go Tab Register
a. Create a username and password (don't forget it)
5. Enter the first part of the code in the "key code".
6. Enter the second part of the code in "key pwd".
a. For example (5138RDKFDA83 ---- D385KD-)
b. The first part of the code is 5138RDKFDA83 --------- The second part of the code is
D385KD
7. Click register.
8. We go to the "login" and log in.
9. (Optional) Spoof now.
DEPSHOP RECOMMENDS NOT USING BUILT-IN SPOOFER
10. Click Initialize.
11. Start the game after closing the program.
a. The game should be in borderless mode!
12. Reset HWID directly in the loader, but on every reset, the clock from the key is minus 3 hour.
13. Troubleshooting:
a. Restart your PC and try again.
b. Check your keybinds.

© 2023 DepShop
LIGMA
https://deprimereshop.com/shop/escape-from-tarkov/ligma/escape-from-tarkov-ligma/

INSTRUCTIONS:

BIOS
1. Turn off Hyperthreading in windows
2. Turn off Virtualization ( VT-d / VT-x )

Loader
ONLY RUN THE LOADER ONCE > REDOWNLOAD EVERY TIME AFTER RUNNING
3. Download the Loader here
https://labskings.com/loader/
4. Rename the file that downloads to a new name (example: guide )
5. Run as admin
6. Enter key and press ‘Connect’ and ‘Start’
7. The cheat will automatically start after you run the game if there is no error
8. Run Escape from Tarkov

- Game must be set to Borderless

- Disable ‘Only use Physical cores’
- Disable ‘Auto RAM cleaner’
- Press Insert to open menu

Troubleshooting
- ESP is shaking
o Disable anti-aliasing or set FXAA in graphics settings
- Laucher Error
o In cmd prompt type > bcdedit /set hypervisorlaunchtype off

© 2023 DepShop
RADAR HEADEYES
INSTRUCTIONS:
Make sure page 2-3 of the DepShop guide is complete.
- Depshop does not recommend using the built-in HWID Spoofer
- For best results use Google Chrome with the Google Translate Extension.
- Offline: need to select maps
- Online: it auto-detects the map
1) Go to the loader Website.
https://wwp.lanzouy.com/b03j5c8zi
password:fast
2) Download the most recent English loader (Sky Fast_English ####English.rar)
3) Run FAST_en.exe as admin
4) Registration (2nd tab of loader, if you are renewing a sub you need to make a new account
regardless)
- Account: Enter a Username you want to use
- Password: Password for the loader. Make universal password if you are radar browser with
friend
- Confirm Password: Password for loader
- Card Serial: Enter the key you received from Depshop
- Safe Password: Recovery password in case you forget the account password
- Recommander: Depshop
5) Click Register
6) Go the first tab to login
- Enter username
- Enter Password
- Select server with lowest ping
7) Window pops with amount of time left
8) Click OK
9) Window pops up with radar website. Copy & paste into browser.
10) Login to Radar Website
- enter key
- enter username
11) Start game

F7 - Infinite Stamina
F8 - No Recoil
You can use WindowsTOP program to put the web browser behind the game on your monitor and have
it transparent.
If you encounter any issues. Screenshot and use yandex picture translate
(https://translate.yandex.com/) and send in ticket to support.

© 2023 DepShop
ROCKETLEAUGE ROIDS

-Go to https://wescript.app/ and create an account

(hint: Feretorix is the owner)
- Download the loader from the home page

- After downloading the loader go here https://wescript.app/reseller/keys/

- Activate your key

- If you recieve this error ignore it and go to here: https://wescript.app/clients/purchases/

- Click Manage and copy your NEW key

- Open Rocket League
- Open loader and enter your NEW key
- Once inside the loader you can see a description of features below that click download and save.
-Once "Download Complete..." is displayed at the bottom of the loader you can click "Open Location and
Close"
-Open the new program that was saved
-Wait till command prompt closes and enjoy

© 2023 DepShop
VECTOR
https://deprimereshop.com/shop/spoofers/eacbe/vector-spoofer/

INSTRUCTIONS:
1. Install Visual C++ Redistributable Packages.
a. Protip: use the DepShop Tool
Visual C++ Redistributable 2010 x86
Visual C++ Redistributable 2010 x64
Visual C++ Redistributable 2012 x86
Visual C++ Redistributable 2012 x64
Visual C++ Redistributable 2013 x86
Visual C++ Redistributable 2013 x64
Visual C++ Redistributable 2015 x86
Visual C++ Redistributable 2015 x64
DirectX 9.0c (run DXSETUP file)
Loader

1. Extract downloaded file with Vector in any empty folder.

2. If there is a problem with the loader, then try to move it to a folder with only Latin letters.
a. Wrong: C:\Users\PC\Desktop\Вова\loader\
b. Correct: C:\Users\PC\Desktop\Vova\loader\
3. Make sure the loader is on drive C:\
4. Click " Vector_loader.exe" as administrator
a. The console itself will close when Vector will be installed
b. After the console is closed, a loader with a random name in the folder will appear
5. Run random name.exe file as Administrator, .exe will open a new console, wait until it’s done
downloading
6. You will see the login window in Vector
a. If the installer crashes: Delete all files except those that appeared after launch "
“Vector_loader.exe" and run the installer again.
7. Click registration
a. Login - write here Your username you wish to use to login
b. Pass - Your password, you cannot use numbers
c. Email - Here enter Your valid email address
d. Key - Input key you received from initial purchase.
e. Make a note of this data because you will need them in case of loss of password/login
8. After you enter all 4 items click on the registration button
9. Click on the words and it will automatically log in to your account.

- EAC 2 for EAC games

- BE/EFT for BE games
- BE/EFT STATIC to keep the same hwid for spoofs (delete file to change hwid)

© 2023 DepShop
VEGA
INSTRUCTIONS:
VEGA does not work with VECTOR spoofer.

BIOS
1. Follow page 2 of this guide.
2. Check your windows Version. https://deprimereshop.com/shop/escape-from-
tarkov/vega/escape-from-tarkov-vega/
3. Ensure in your BIOS:
a. UEFI ENABLED
b. CSM: OFF/OTHER OS
c. Virtualization Based Security: DISABLED
d. Secure Boot: DISABLED
e. Intel Virtualization for Intel: DISABLED (including VT-X, VTD, AND/OR AES-NI)
f. SVM for AMD: DISABLED
g. RAID0 DISABLED (Mostly AMD based Systems have this)
LOADER:
1. Set EFT to *Borderless window mode* and close EFT
2. Open loader, click register.
a. Create a username and password. The password must have a capital letter, one number
and one special sign. Write this password down, we cannot retrieve this!
3. After registration, type product key and login.
4. Press the Load button. A pop-up appears to reboot your machine.
5. After reboot, open the loader and login again.
6. Press Load for the second time. If everything went as expected, the loader should close
7. itself now.
8. If using spoofer, SPOOF NOW (OPTIONAL)
9. Start EFT.
10. Wait 15 seconds and press the INS key, the menu should appear.
11. To Open / Close the menu again, use the INS key.

TROUBLESHOOTING:
- BSOD when pressing INS: Load into Raid and then press INS
- In EFT settings: Turn physical cores off, ram cleaner off.
- Follow this video. Set it manually to 1 minute instead of 5 as per video
https://www.youtube.com/watch?v=NvQHYT-fbBg&ab_channel=FFocus

© 2023 DepShop
WRATH SPOOFER
INSTRUCTIONS:

1. Verify windows version is supported!

https://deprimereshop.com/shop/spoofers/eacbe/wrath-spoofer/
2. In BIOS
a. validate UAC is OFF
b. validate secure boot is OFF
3. Disable Photo mode / Game filter in overlay in Nvidia control panel

4. Run the Serial checker to see your real HWID

- If using Rust use dxe spoof
- All other games use normal spoof
5. Run the Serial checker to see the Spoofed HWID

IF YOUR HWID IS THE SAME, DO NOT USE. Visit Page 2 of this document.
Wrath will not work for EFT Ligma, open a ticket if you bought both.

© 2023 DepShop
WARTHUNDER EAC
INSTRUCTIONS:
------System Requirements ------
Check product page

------ Instructions ------

1) Remove these programs if you have them: face it, riot vanguard, and similar an deficit
2) Remove any antivirus, Revo Unistaller recommended
3) Disable Windows Defender and Windows Firewall
4) Extract the software from the archive to a folder convenient for you.
5) Run the software as administrator! (game and game launcher must be closed!)
5) Activation key, download and install Logitech G HUB (there is a button in the loader).
6) Assign the aim button and feel 900%.
7) Click start, wait for the message, you can start the game!

- If the software doesn't want to work in frameless mode, use windowed mode!
- If the ESP disappears, lags or crashes the game, enable vsync (or lower the game's FPS to 60 via the
nvidia control panel)
- If your software doesn't work on the steam version, install the game launcher and enter the same data
there that you entered when launching the game via steam
-Virtualization must be turned off! (how does google do this, if it doesn't work)

© 2023 DepShop
X-RAY
INSTRUCTIONS:

1. Open discord, click settings on the bottom left

2. Turn on overlay

3. Turn on Activity Status

4. Add Game MANUALLY to the activity list
5. Run loader as Admin
6. Spoof now (optional)
7. Start Game and doublecheck that u get an Discord overlay msg in-game before hitting
F5
8. If all done correctly press INS/DEL to open the menu

© 2023 DepShop
How to downgrade windows version while keeping files:

Note: This only applies to anyone using Windows 10. Windows 11 users cannot downgrade without
losing all files and reinstalling windows.

a. Run the 20H1 (2004) setup.

- Download here or Non-English (search for your language):
b. Open file and run the setup.exe
c. Follow picture below:

Return to ‘START HERE’

/////

Exploit settings:

Return to ‘START HERE’

© 2023 DepShop