ZVOX AccuVoice TV Speaker

MODEL AV157 | SETUP & OPERATION

www.zvox.com
 Important Safety Instructions
1. Read these instructions. the apparatus has been damaged in any way, such as power-supply cord or plug
READ THIS FIRST 2. Keep these instructions. is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
Important Safety Instructions 3. Heed all warnings. been dropped.
For ZVOX Audio System 4. Follow all instructions. 15. Grounding or Polarization–This product may be equipped with a polarized
5. Do not use this apparatus near water. alternating-current line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature. If you are unable to
WARNING 6. Clean only with dry cloth. insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
7. Do not block any ventilation openings. Install in accordance with the fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT manufacturer’s instructions. purpose of the polarized plug.
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO
8. Do not install near any heat sources such as radiators, heat registers, stoves, 16. Ventilation–Slots and openings in the cabinet are provided for ventilation and to
DRIPPING OR SPLASHING WATER AND NO OBJECT or other apparatus (including amplifiers) that produce heat. ensure reliable operation of the product and to protect it from overheating, and these
FILLED WITH LIQUIDS SUCH AS VASES SHALL BE
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A openings must not be blocked or covered. The openings should never be blocked by
PLACED ON APPARATUS. placing the product on a bed, sofa, rug, or other similar surface. This product should
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third not be placed in a built-in installation such as a bookcase or rack unless proper
prong are provided for your safety. If the provided plug does not fit into your ventilation is provided or the manufacturer’s instructions have been adhered to.
CAUTION outlet, consult an electrician for replacement of the obsolete outlet. 17. The MAINS plug or an appliance coupler is used as the disconnect device, the
10. Protect the power cord from being walked on or pinched particularly at plugs, disconnect device shall remain readily operable.
RISK OF ELECTRICAL SHOCK, DO NOT OPEN
convenience receptacles, and the point where they exit from 18. CLASS II apparatus with double insulation, and no protective earth provided.
Warning: To reduce the risk of electrical shock, do not the apparatus. 19. CAUTION: Danger of explosion if the remote control battery is incorrectly replaced.
remove cover (or back) – no serviceable parts inside.
Refer servicing to qualified service personnel. 11. Only use attachments/accessories specified by the manufacturer. Replace only with the same or equivalent type.
13. Unplug this apparatus during lightning storms or when unused for long 20. WARNING: The remote control battery (battery or batteries or battery pack) shall not
periods of time. be exposed to excessive heat such as sunshine, fire or the like.
The exclamation point within an
equilateral triangle is intended to alert 14. Refer all servicing to qualified service personnel. Servicing is required when 21. No naked flame sources, such as lighted candles, should be placed on the apparatus.
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
AccuVoice TV Speaker Model AV157 Dimensions
This lightning flash with arrowhead Disposing of this appliance
symbol, within an equilateral triangle, is
intended to alert the user to the presence Electric and electronic appliances often contain valuable materials. 47 mm
(1-27/32”)
of uninsulated “dangerous voltage” These appliances may also contain materials essential for the
within the product’s enclosure that may correct functioning of your appliance which, if handled or disposed
be of sufficient magnitude to constitute a
risk of electrical shock to persons. of incorrectly, could be hazardous to human health and to the 47 mm
(1-27/32”)
environment. Therefore, please do not dispose of this appliance
with your household waste. Dispose of it at your local community
waste or recycling center, or contact your retailer for advice. 300 mm (11-13/16”)
85 MM
432 mm (17”) (3-1 1/32”)

2 Quick Setup Guide

 Quick Setup Guide
(This quick setup guide applies the optical digital audio connection (A) as the primary example. This is the most common audio output on modern TVs
Follow instructions (A, B, C, or D) according to the available TV audio out jacks on your TV.

A INPUT POWER

Back of TV
ACCUVOICE SURROUND

A)
15 VDC STANDARD MINIJACK HEADPHONE
OPTICAL OPTICAL OR
DIGITAL /ANALOG SUBWOOFER MUTE VOLUME
POWER INPUT INPUT OUTPUT
MINIJACK

DIGITAL
AUDIO
OUT
B)
1. Position & Power ZVOX AV157 TV Speaker (TV Port Example) 3. Disable TV’s Sound & Turn On The
NOTE: For brevity, the ZVOX AccuVoice TV Speaker Model AV157 is often AV157
referred to as the “ZVOX speaker” or “AV157” in this User Manual.
Tune your TV to a program, then use the original TV remote
Note: Only one of three audio cables and one power cable is needed for the to access the TVs Home Menu -> Options or Settings ->
setup. Sound or Audio -> Speaker List or Sound Out -> Select
the Audio System, External Speaker, or Optical Audio Out
Position the AV157 on any level surface near the TV and connect the power cord
option. Note: Menu list varies based on TVs year and make,
to the power jack on the back of ZVOX, then connect the AC plug into an AC A) Optical port of TV set. see TVs owners manual.
power outlet. B) Input panel of ZVOX sound bar.
Note: Not all TVs list this adjustment choice, if your TV does
STANDARD MINIJACK HEADPHONE 2. Connect The Optical Signal Cable not simply turn the main TV volume to zero and continue

A)
15 VDC OPTICAL OPTICAL OR using the ZVOX remote to control the volume.
DIGITAL /ANALOG SUBWOOFER
Most TVs have an optical digital output jack sometimes labelled “SPDIF or TOSLINK”
POWER INPUT INPUT OUTPUT
located on the side or back panel of the TV. (A) Using the ZVOX AV157 remote, tap the POWER button to
MINIJACK
turn On the ZVOX speaker. You may hear sound if not tap
B) NOTE: Be aware the optical cable and jack are not exactly square. Similar to a puzzle
piece, position the optical cable end so it matches the orientation of the optical jack then
the INPUT button on the AV157 remote until “InId” appears
on the face of the AV157. This indicates the optical digital
push the cable into the jack. You should hear and/or feel a “click” when the cable is input has been selected.
correctly inserted into the optical jack.
You should be able to hear the ZVOX speakers sound, use
Connect one end of the supplied optical signal cable to the TVs optical jack (A), then the volume buttons on the ZVOX remote to set the volume
connect the opposite end of the optical signal cable to the optical jack on the ZVOX to your preferred level. Done
speaker labelled Standard Optical digital input 1D (B).

A) AC Power Outlet. NOTE: If the TV does not have an optical connection or its too difficult you can also
connect the ZVOX speaker using one of the alternative setup options. See instructions B,
B) Power receptacle of ZVOX sound bar. C or D on page 4.

AV157 North American edition 3

 Alternative Ways To Connect The AccuVoice TV Speaker Model AV157
If your TV doesn’t have an optical audio output, here are some other options:

Back of TV
B Back of TV
C D
HP

A) A)
15 VDC STANDARD MINIJACK HEADPHONE
15 VDC STANDARD MINIJACK HEADPHONE OPTICAL OPTICAL OR
OPTICAL OPTICAL OR DIGITAL /ANALOG SUBWOOFER
DIGITAL /ANALOG SUBWOOFER
RCA jacks Other POWER INPUT INPUT OUTPUT
POWER INPUT INPUT OUTPUT

B)
MINIJACK

B)
MINIJACK
labeled RCA jacks
(TV Port Example) “AUDIO OUT” (usually audio IN)
PC R L R L

X
AUDIO OUT
X IN

Connecting To A Cable Or Satellite TV Set Top Box

If your TV’s audio output is inaccessible (on a wall-mounted TV, for instance) or
unavailable, you can connect to the audio output of your cable or satellite set
top box to the ZVOX speaker. Most set top boxes have an “audio output” in
addition to the HDMI output intended for use with the TV.
Red & White
A) Analog Out/RCA RCA
(Red to
and3.5mm
White) portAnalog
of TV set. Audio cable To connect between the cable box and the ZVOX speaker, identify the audio
3.5A) Analog Out/Headphone port of TV set.
mm to 3.5 mm Miniplug Analog Stereo cable
B) Input panel of ZVOX sound bar. B) Input panel of ZVOX sound bar. output available on the back of the cable or satellite box, then follow the
Some TVs have red/white RCA jacks for analog audio output Be sure you
Many TVs have a headphone audio out minijack sometimes labeled “Audio have located the red and white jacks on the TV that are specifically marked as cooresponding instructions in previous setup column A or C.
Out” or “HP” not PC IN. (A) “AUDIO OUTPUT” NOT “Audio IN or COMP IN”. (A)
Note: Connecting the ZVOX speaker through this option outputs this source
Insert one end of the supplied analog 3.5mm miniplug to 3.5mm miniplug cable Insert the red and white plugs into the red and white jacks on the TV labeled only. Remember to use the audio out or digital audio out, NOT comp-in or av-in
into the TV’s headphone audio out minijack. (A) Insert the opposite end of the “Audio Out”. (A) Insert the 3.5mm miniplug end of the cable into the ZVOX
cable into the ZVOX speaker input jack labeled MINIJACK ANALOG INPUT. (B) speaker input jack labeled MINIJACK ANALOG INPUT. (B)
Once the mini analog stereo cable is completely connected it will be important Once the RCA analog cable is completely connected, tune your TV to a
to keep the TVs main volume above 50% and continue using the ZVOX remote program, then use the original TV remote to access the Home Menu -> Options A Coaxial Digital Audio Signal Source or No Audio Out:
for volume control, if not it may cause a weak enough audio signal and shut off or Settings -> Sound or Audio -> TV Speakers -> OFF or Speaker List, Sound
the ZVOX speaker. This ZVOX Audio soundbar does not have a coaxial-format digital audio input.
Out -> Select Audio System, External Speaker, or the Optical Audio Out option.
A coaxial digital to optical digital audio converter OR a coaxial digital to stereo
Menu list varies based on TVs year and make, see TVs owners manual. If this
If you have yet to hear sound tap the INPUT button on the ZVOX speaker analog audio converter should be used. If your TV or cable/satellite box do
option is unavailable keep the main TV volume at zero and continue using the
remote until “In2A” appears on the ZVOX display, this selects the analog not have audio outputs available at all a HDMI extractor should be used. Visit
ZVOX remote for volume. Done
minijack input. Done support.zvox.com or contact ZVOX Audio at [email protected] to learn what
suitable audio converters or HDMI extractors are available.
Note: Rarely TVs list an analog audio out setting that must be set from Variable
Note: Maintain the main TVs volume above 50% and continue using the ZVOX to FIXED, if you see this do so. If you have yet to hear sound, tap the input
remote for volume control, if neglected it may cause a weak enough audio button on the ZVOX remote control until the ZVOX display reads “In2A”.
signal causing the auto shut off to react. See page 7 Continue using the ZVOX remote for the volume control.
4 Quick Setup Guide
 Connection Options Duel Inputs Allows Two Audio Source Inputs
Audio cables supplied with the ZVOX TV Speaker For instance: If you have your TV's optical digital cable connected to Input 1 on the ZVOX speaker, you can also connect to a second audio source output from the
ZVOX speaker’s 2nd Input minijack. This allows you listen to a music-only sources without needing the TV on. This could be music from a smartphone, tablet, a disc
standard optical plug analog miniplug red and white
to
player or the “music only” channels from a cable or satellite set top box or computer.
to RCA plugs
standard optical plug analog miniplug to analog miniplug When ready to hear an audio source connected to Input 2, press the INPUT button on the ZVOX remote to choose the second input. An analog signal source will
appear as “In2A”. A digital signal source will appear as “In1d”

Placement Options
TV to AV157 Audio Signal Cable Guide
The AV157 includes one optical digital signal cable and two analog signal
cables. Two of these three cables will connect from most TVs or cable/
satellite set top boxes to the digital or analog input on the AV157. In the rare
instance your TV has an optical minijack audio output, an optical miniplug to
standard optical plug cable is needed. (not supplied with the AV157 but sold
seperately).

Placing The AccuVoice TV Speaker in Front of the TV. ZVOX Speaker Wall Mounting Information
Most people choose to place the ZVOX speaker in front of the TV. But it can also The AV157 speaker has two M3 threaded sockets in the enclosure back. Two
be placed on any level surface near the TV – above, below or to the left or right. 10mm length screws are provided for these sockets and with the correct
Headphone or Subwoofer Output Minijack Choose a place that lets you direct the ZVOX Speaker towards the TV viewers. keyhole sloted hardware you can use these sockets to secure the ZVOX
This minijack port provides a signal for headphones or an amplified subwoofer. AV157 speaker to most flat surfaces, like a wall or shelf. Longer screws may
• A safe, secure installation of the AccuVoice TV Speaker is the
The signal level from this output varies with the volume level of the ZVOX be necessary NOTE: It is the ZVOX AV157 owner’s responsibility to ensure the
owner’s responsibility.
speaker. This same port can be utilized to connect a Universal Bluetooth any such mounting is safe and secure. Each of the two mounting sites should
Transmitter/Receiver for a wireless audio experience to wireless headphones • Do not place any objects on top of the AccuVoice TV Speaker. be able to secure a five pound (3 KG) object.
or for receiving music from a Smartphone or tablet. (Not included)

Note: Accuvoice 1 (AC1) feature is constantly enabled through the headphone

out port. If you wish to mute the output of the ZVOX speaker while listening to
headphones, press and hold the MUTE button on the ZVOX speaker remote for 5
seconds. (See more on page 6). Compatible Subwoofers must have own power
supply and a built in crossover frequency adjustment knob.

AV157 North American edition 5

 Button Functions on the Using Voice Assistance System Input Feature (both)
It’s simple to integrate an Amazon® Echo®, Echo Dot or Echo Input to the Mute
ZVOX Remote Control AV157. Connect your TV to Input 1. Connect the Echo device (via 3.5mm cord)
to Input 2. Then set input selection to “both,” by pressing and holding the INPUT
Tap this button to mute the ZVOX speaker. When MUTE function is active,
the display blinks “-00-”. The AV157 will enter Standby if it is left in MUTE for
button for five seconds. (“Hard Hold”) If you are watching a TV program and ask longer than five minutes.
Power Remote Control Button Layout. “Alexa” a question, the AV157 will turn down the TV sound while Alexa answers
Changes the ZVOX speaker between OFF your question. When Alexa stops speaking, the AV157 turns up the TV sound. To
& ON. Note: The ZVOX AV157 will enter INPUT POWER switch back to Input 1d or 2a, press and hold the INPUT button for five seconds.
Standby if it receives a weak enough or no
audio signal for approximately 20 minutes. Note: If the “both” input is mistakenly enabled without an integrated Amazon®
A command from a remote control or a Echo®, Echo Dot or Echo Input setup you may hear normal audio but the ZVOX
restored audio signal will turn it back on. ACCUVOICE SURROUND speaker may act abnormal, change the input when not in use.
Headphone Only (HP) Mode:
For silent headphone listening: Press and hold the mute button for five seconds
AccuVoice this will activate headphone mode. “HP” will appear on the ZVOX speakers
Volume display, to remove “HP” mode repeat the process. Power cycling the ZVOX
Tap the AccuVoice button to select the AccuVoice function. Additional
These appropriately named buttons control presses of the AccuVoice button allow you to select increasing levels of voice speaker also cancels headphone-only operation. When active the headphones
the volume up, down & also used to adjust enhancement. There are six levels of AccuVoice enhancement, starting with volume is controlled through the ZVOX remote control.
the different “Other Settings” adjustments. AC 1 going up to AC 6. The setting you select remains the default AccuVoice
MUTE VOLUME setting until you decide to change it. Note: Accuvoice 1 (AC1) benefit is constant through the headphone out port.

UP TO

Input Selection
Tap the INPUT button on the ZVOX
remote to select between the
speaker’s three inputs.
The choices are: SuperVoice Setting For Extreme Voice Clarity
People with hearing loss will appreciate the extra boost provided by the new Surround Settings
Optical digital — IN1d SuperVoiceTM feature. SuperVoice uses advanced compression algorithms to lift There are three SURROUND levels:
voices out of the other sounds in a TV show, sporting event or movie.
• Surround One (“Sd 1”) has low virtual surround
To activate SuperVoice mode press and hold the AccuVoice button on the effect and strong vocals. Use this setting if vocal
Analog minjack — In2A remote control for about four seconds. The display on the AV157 will the clarity is important to you.
change for “AC 1” to “SUP1” – indicating the speaker is in “SuperVoice 1”
mode. Continue with quick presses to the AccuVoice button to select increasing • Surround Two (“Sd 2”) has moderate virtual
levels of voice enhancement. There are six levels of SuperVoice enhancement, surround effect and moderate vocals. This is the
Voice Assistance
starting with SUP1 going up to SUP6. The setting you select remains the default recommended setting for general TV programs.
System use only – both
AccuVoice setting until you decide to change it. • Surround Three (“Sd 3”) has strong virtual
Note: Pressing the Surround button removes the SuperVoice boost feature. surround effect and moderate vocals. Many
people prefer this setting when watching movies.

UP TO
Note: For high fidelity sound use this feature. Pressing the Accuvoice button
disables the surround sound setting.

6 Quick Setup Guide

Other Settings Button Controlling the ZVOX TV Speaker With Preferred Remote Controlling With Preferred Remote Continued...
The Other Settings button allows access to the Bass and Treble adjustment The ZVOX TV speaker “learns” to respond to one of many cable/satellite or
and turns the Output Leveling feature On and Off. TV remote controls. The supplied ZVOX remote control will always adjust the
ZVOX AV157 even after the preferred TV remote is programmed to control the “-- 3” will appear indicating the mute on the preferred remote. Same steps,
1) Bass Adjustment: The first press of the Other Settings button displays the hold down the MUTE button for 1 full second then release. “REP” will appear
ZVOX speaker. If these steps do not work refer to the ZVOX support page
current Bass setting. The range of bass adjustment goes from LO 4 to LO-6 indicating to repeat the process of holding down for 1 second and releasing
support.zvox.com for alternate instructions that may be specific to your
(This display is shorthand for Lows plus 4 and Lows minus 6). While displayed “GOOD” will appear indicating success (NoCh appears if unsuccessful) followed
preferred remote.
quickly use the volume buttons to adjust the bass output across this range. by the 4th and final step.
Then wait for the adjustment display to turn off. Note: Turn the TV OFF while following these steps for less interference. This
process will time out after 30 seconds of inactivity.
2) Treble Adjustment: Two presses of the Other Settings button displays the
current Treble setting. The range of treble adjustment is HI 4 to HI-4. That is
short hand for Highs plus 4 and Highs minus 4. While displayed quickly use the
Turn the ZVOX speaker OFF, next press & hold the OTHER SETTINGS button on
volume buttons to adjust the treble output across this range. Then wait for the
the ZVOX remote for 5 seconds placing the ZVOX into the universal learn mode. “Pr 4” will appear indicating the TV power on the Preferred remote. Same
adjustment display to turn off.
(“Lrn” will be on the AV157 display) allowing the preferred remote control to steps, hold down the POWER for 1 full second then release. “REP” will appear
3) Output Leveling: Three presses of the Other Settings button displays the start being programmed. indicating to repeat the process of holding for 1 second and releasing, “GOOD”
Output Leveling feature. While displayed quickly use the volume buttons to will appear indicating success (NoCh appears if unsuccessful). Done.
adjust, the display will be either OL (Output Leveling engaged) or noOL (Output
Leveling off). Then wait for the adjustment display to turn off.
When engaged, Output Leveling prevents large swings in volume. It also “UP1” will appear indicating the first ste for volume up on the preferred
reduces volume differences between TV channels on cable or satellite systems. remote. Hold down VOLUME UP for 1 full second then release. “REP” will
appear indicating to repeat the process of holding Volume Up for 1 second
A fourth press of the Other Settings button returns you to the current volume
and releasing. GOOD will be displayed indicating succes (NoCh appears if
setting and exits Other Settings adjustment.
unsuccessful) followed by the 2nd step.

OTHER “Dn2” will appear indicating volume down on the preferred remote. Same
SETTINGS (PS) steps, hold down VOLUME DOWN for 1 full second then release. “REP” will
appear indicating to repeat the process of holding volume down for 1 second
and releasing, “GOOD” will appear indicating success (NoCh appears if
Auto On/Off Operation unsuccessful) followed by the 3rd step.
As delivered, the AV157 will turn ON and OFF automatically in response to
the audio signal from the TV and manually respond with the POWER button
on the ZVOX remote. This feature is enabled out of the box. A weak enough
audio signal may cause this feature to go off every 20 minutes. If you do not
want the AV157 to automatically turn off in response to the TV’s audio signal,
the feature can be easily disabled.
Note: If noCH appears on the ZVOX display, the attempt has failed please try
To Disable or Enable Auto On/Standby feature: While the speaker is again.
ON, press and hold the power button on the ZVOX remote for 5 seconds,
“NoAs” will appear on the display indicating the feature is disabled, release
the power button. The system should not shut down automatically (“AS”
indicates the feature is enabled).

AV157 North American edition 7

 USA Warranty & Registration
For warranty & registration information applicable to an AV157 please visit
these webpages:
zvox.com/pages/warranty-returns
zvox.com/pages/product-registration
support.zvox.com

STILL NEED ASSISTANCE? If your TV is not the same as the descriptions

in this guide, don’t hesitate to send an inquiry to [email protected] or
call ZVOX Audio at (866) 367-9869. Please provide your TV brand and model
number. A ZVOX Audio representative will be available (Eastern Time Zone)
9:00 AM to 9 PM Monday through Friday and 10:00 AM to 6:00 PM on
Saturday. For further information about additional options, please refer to the
ZVOX Audio website, www.zvoxaudio.com or support.zvox.com

For further information about additional options, please refer to the ZVOX
Audio support website, Support.zvox.com.

www.zvox.com
100157 US 2021
© 2021 ZVOX Audio LLC. ® ZVOX, AccuVoice & PhaseCue are registered trademarks of ZVOX Audio LLC. Supervoice is a registered trademark.