FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 1940
B36.10, BEVEL END, DS01 NACE, S40

FITTINGS

2 REDUCER ECC, WELDED ASTM A815 UNS S31803 WP-W + 30 x 20 REX42DBWN30252004 1

100% RT, ASME B16.9, BUTT WELD, DS01 NACE, 0.875" x S40
3 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 30 E9X42EBWN3025 1
RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, 0.875"
4 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E9X42EBWN2004 2
4 RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40
<1
>1 S7
02 FLANGES
11 P-3P-PS-15487
39 ORI = D 5 FLANGE WN, ASTM A182 GR F51, ASME B16.47 SERIES A, 30 FWX31BRJEEN3025 1
S8 16 FLANGED RING TYPE JOINT, ASME CLASS 900, DS01 NACE,
P-3P-PS-13041 0.875"
6 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 1
ORI = D RAISED FACE, ASME CLASS 600, DS01 NACE, S40
S15 SUPPORTS
SDV 27
84
1040 1194 7 STANDARD WELDED SHOE WITH REINF. PAD ; S3-20-400-DS ; 20 P-3P-PS-15487.1 1
S16 RP1-1-20-440-DS-12 ; BP2-20-146x300-P
13 FJ13 >1 8 PIPE SHOE WITH REINF. PAD FOR HEAVY LOADS ; 20 P-3P-PS-13041.1 1
<2 B
"N S11A-20-100-DS ; RP1-1-20-340-DS-12 ; BP2-20-152x300-P
14 20
G11 13 ERECTION MATERIALS
FC 92
FJ14
VC1 F6 G11 B13 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
(TYPE-2) NO (INS) (mm/no.)

CONT. ON E 221146 762 FITTINGS

SHT. 2 N 23359
9 SPACER & PADDLE, ASTM A240 UNS S31803, PROJECT STD, 30 F9X21BRJEEN30 1
EL +40177 610 ASME B16.47 SERIES A, FLANGED RING TYPE JOINT, ASME
CLASS 900, DS01 NACE

GASKETS

10 GASKET, UNS S31803 (190 BHN MAX), OVAL RING TYPE "R" 30 GAX72TEE30 2
4 ASME B16.20, ASME CLASS 900
EL +40177 11 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 20 GAX71PDD20 2
FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
2 ASME CLASS 600
30"x20"NB
BOLTS
127MM OFFSET
FLAT SIDE DOWN 12 795 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 3 20
DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
CONN. TO XYLAN 1014-GRAY COLOR
MBD-1010-N3 43 13 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 24
11 DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
E 221470
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
a N 20575 9 XYLAN 1014-GRAY COLOR
23 EL +41940
P- TAIL EAST
INSTRUMENTS
11 OPEN
5
14 SHUTDOWN VALVE CL.600 RF 20 SDV-1040-13 1
153
G10 EL +41781 SUPPORTS
FJ12 F5 G10 B12 15 STRU. STEEL BRACKET T - TYPE ; B9A-D-600-300-508 20 P-3P-PS-15487/SREF.1 1
16 STRU. STEEL BRACKET T - TYPE WITHOUT BRACING ; 20 P-3P-PS-13041/SREF.1 1
1471 FJ12 B13-B-500-500-BP
30"NB
40
11 CUT PIPE LENGTH
3
EL +40304 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 1260 20 <2> 680 20

18
4b

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 1 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 4906
E 221146 B36.10, BEVEL END, DS01 NACE, S40
2 PIPE, SEAMLESS ASTM A790 UNS S31803, ASME B36.19, 3/4 PAX11BBEN0C8S 234
N 23359 BEVEL END, DS01 NACE, 80S
EL +40177
FITTINGS
F7 G11
3 FLANGOLET, ASTM A182 GR F51, MSS SP-97, ASME B16.5, 20 x 2 OFX31BRFDDN2004024S 2
FJ01 FLANGED RAISED FACE, ASME CLASS 600, DS01 NACE, S40 x
4
CONT. FROM 40S
2"x3/4"NB G11 B14 4 REDUCER CONC, SEAMLESS ASTM A815 UNS S31803 WP-S, 2 x 3/4 RCX41DBWN024S0C8S 1
SHT. 1 ASME B16.9, BUTT WELD, DS01 NACE, 40S x 80S
5 5 ELBOW 90, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 3/4 E9X41EBWN0C8S 1
7
59 B16.9, R=1.5D, BUTT WELD, DS01 NACE, 80S
FJ01 B
"N F6 B13 FLANGES
20
38 6 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 2
156 RAISED FACE, ASME CLASS 600, DS01 NACE, S40
3
7 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 2 FWX31ARFDDN024S 1
20"x2"NB

336
RAISED FACE, ASME CLASS 600, DS01 NACE, 40S
8 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FWX31ARFDDN0C8S 1
15 10 RAISED FACE, ASME CLASS 600, DS01 NACE, 80S
SPQ-104101
404 SUPPORTS

9 PIPE SHOE WITH REINF. PAD FOR HEAVY LOADS ; 20 P-3P-SPS-12752.1 1

S11A-20-100-DS ; RP1-1-20-340-DS-12 ; BP2-20-150x300-P

3/4"NB
<1> 2
ERECTION MATERIALS
86
24 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
F8 G12 FJ02 NO (INS) (mm/no.)
EL +39841 FITTINGS
E 220549 10 SAMPLER QUILL CL.600 RF SPQ-104101 2 1
N 23978
56
41 EL +39838 GASKETS
CONT. ON
S9 11 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 2 GAX71PDD02 2
SHT. 3
P-3P-SPS-12752 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
ORI = D THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600
12 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 3/4 GAX71PDD0C 1
FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600
S15
BOLTS
CONT. ON
3P-1.5-CI-D5DCN-104117-6H1 13 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 24
DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
4103-TOYO20-92DJ-1300-695 NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
S16
E 216393 XYLAN 1014-GRAY COLOR
P-3P-SPS-12752 14 130 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 5/8 BSZ64BG0F130 8
N 23359
ORI = D DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
EL +40580 NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
XYLAN 1014-GRAY COLOR
3
20"x2"NB SUPPORTS
404 15 SPECIAL SUPPORT 20 P-3P-SPS-12752/SREF.1 1
16 HOLD DOWN GUIDE FOR PIPE SHOE ; G12B-20-132-52 20 P-3P-SPS-12752.2 1
7
54

E 215846 1 CUT PIPE LENGTH

>
N 23359 <2
EL +40177 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 234 3/4 <2> 4906 20
CONT. ON
SHT. 4 F6

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 2 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS
2
PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
EL +40690 NO (INS) (mm/no.)
3/4"NB 2
10
PIPE

FJ03 1 PIPE, SEAMLESS ASTM A790 UNS S31803, ASME B36.19, 3/4 PAX11BBEN0C8S 7427
CONT. ON S9 BEVEL END, DS01 NACE, 80S
3P-0.75-PL-D5DN-104107-9P1 P-3P-PS-13738

<5> 1
FITTINGS
4103-TOYO20-92DJ-1300-672 F3 G10 B11 ORI = E
E 224909 2 ELBOW 90, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 3/4 E9X41EBWN0C8S 6
N 23613 EL +40336 S22 B16.9, R=1.5D, BUTT WELD, DS01 NACE, 80S
EL +40690 P-3P-PS-13738
ORI = E FLANGES

954
S21
P-3P-PS-13738 3 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FWX31ARFDDN0C8S 2
RAISED FACE, ASME CLASS 600, DS01 NACE, 80S
ORI = E
SUPPORTS

600
S20
4 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13718.1 1
5 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13731.1 1
6 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13732.1 1
7 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13734.1 1
8 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13736.1 1
9 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-3/4-75x80-P 3/4 P-3P-PS-13738.1 1
S8 ERECTION MATERIALS
P-3P-PS-13736
ORI = D 2 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
>1 NO (INS) (mm/no.)
1 <4
62 GASKETS

10 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 3/4 GAX71PDD0C 1

0 S19
35 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600

BOLTS
2
11 90 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F090 8
<3 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
>1 ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
10
11 1014-GRAY COLOR

SUPPORTS

12 STRU. STEEL BRACKET T - TYPE ; B9B-A-250-125-350-BP 3/4 P-3P-PS-13718/SREF.1 1

13 HOLD DOWN GUIDE FOR PIPE SHOE ; G12A-3/4-92-42 3/4 P-3P-PS-13718.2 1
14 STRU. STEEL BRACKET T - TYPE ; B9B-A-340-150-350-BP 3/4 P-3P-PS-13731/SREF.1 1
S7 15 STRU. STEEL BRACKET T - TYPE ; B9B-A-350-125-358-BP 3/4 P-3P-PS-13732/SREF.1 1
P-3P-PS-13734 16 HOLD DOWN GUIDE FOR PIPE SHOE ; G12A-3/4-91-42 3/4 P-3P-PS-13732.3 1
2 17 STRU. STEEL BRACKET T - TYPE ; B9B-A-350-125-358-BP 3/4 P-3P-PS-13734/SREF.1 1
ORI = D 18 GUIDE FOR PIPE SHOE ; G11A-3/4-92-49 3/4 P-3P-PS-13734.3 1
19 STRU. STEEL BRACKET T - TYPE ; B9B-A-300-150-350-BP 3/4 P-3P-PS-13736/SREF.1 1
20 STRU. STEEL BRACKET L - TYPE (INVERTED) UTILITY 3/4 P-3P-PS-13738/SREF.1 1
<2> 1 STATION ; US2-1055-525-BP
21 HOLD DOWN GUIDE FOR PIPE SHOE ; G12A-3/4-91-42 3/4 P-3P-PS-13738.3 1
CONT. FROM S17 22 LINE STOP ON PIPE SHOE ; LS2A-3/4 3/4 P-3P-PS-13738.2 1
SHT. 2
24
13
S6
P-3P-PS-13732 CUT PIPE LENGTH
ORI = D S18 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
E 220549 P-3P-PS-13734 NO (mm) (INS) NO (mm) (INS)
F3 B11 N 23978 ORI = D <1> 1300 3/4 <2> 3769 3/4
102

EL +39838 <3> 935 3/4 <4> 545 3/4

<5> 878 3/4
3/4"NB 45
38 S15

2
EL +39736 55 S4
0 00 S16
P-3P-PS-13718 21
ORI = D P-3P-PS-13732
13 ORI = D
76
S5
P-3P-PS-13731
S12
ORI = D
<1
>1
8
23
S14
S13
P-3P-PS-13718
ORI = D
2

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 3 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

17 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)
1041-016
VC3 PIPE
FJ15
G13 B15 1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 10086
368 B36.10, BEVEL END, DS01 NACE, S40
20"NB
FJ16 CONT. FROM FITTINGS
4 SHT. 2
20"x1"NB 2 TEE EQUAL, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 x 20 TEX42DBWN2004 1
5 7 RT, ASME B16.9, BUTT WELD, DS01 NACE, S40
69 34 3 REDUCER ECC, WELDED ASTM A815 UNS S31803 WP-W + 20 x 12 REX42DBWN2004124S 1
G14 B16
E 215846 100% RT, ASME B16.9, BUTT WELD, DS01 NACE, S40 x 40S
EL +39772
N 23359 4 FLANGOLET, ASTM A182 GR F51, MSS SP-97, ASME B16.5, 20 x 1 OFX31BRFDDN20040D8S 1
EL +40177 FLANGED RAISED FACE, ASME CLASS 600, DS01 NACE, S40 x
S19 80S
404 F7 G13 B15 5 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E9X42EBWN2004 1
S11 FJ29 EL +39552 RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40
6 ELBOW 45, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E4X42EBWN2004 2
P-3P-PS-13028 RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40
6
64 12
FLANGES

216 FJ30 7 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 2
RAISED FACE, ASME CLASS 600, DS01 NACE, S40
E 214776
>1 N 23359 G14 B16 8 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 12 FWX31ARFDDN124S 1
<1 1041-017 RAISED FACE, ASME CLASS 600, DS01 NACE, 40S
NC EL +39525
SUPPORTS
8 VC2 18
E 213552 57
HANDWHEEL/LEVER ORIENTATION E 9 STANDARD WELDED SHOE WITH REINF. PAD ; S3-20-400-DS ; 20 P-3P-PS-15329.1 1
N 23359 RP1-1-20-440-DS-12 ; BP2-20-146x300-P
EL +40176 10 STANDARD WELDED SHOE WITH REINF. PAD ; S3-20-450-DS ; 20 P-3P-SPS-12761.1 1
RP1-1-20-490-DS-12 ; No BP2
17 11 GUSSET FOR TWO DIRECTIONAL BRACING WITH RPAD ; 1 P-3P-PS-13028.1 1
CONT. ON 93
SHT. 6 F7 GT1-1"-DS
2 ERECTION MATERIALS
20"x20"NB
<2 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
>1
NO (INS) (mm/no.)

FLANGES
5
12 FLANGE BLIND, ASTM A182 GR F51, ASME B16.5, FLANGED 1 FBX31ARFDDN0D 1
RAISED FACE, ASME CLASS 600, DS01 NACE

GASKETS
99
S9 23
13 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 20 GAX71PDD20 2
P-3P-PS-15329 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
ORI = D THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600
14 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 1 GAX71PDD0D 2
FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
S21 THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
20 P-3P-PS-15329 ASME CLASS 600
73 S20 ORI = D
BOLTS

15 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 48
DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
XYLAN 1014-GRAY COLOR
16 95 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F095 8
(IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
>1 ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
<3 1014-GRAY COLOR
6
45o VALVES / IN-LINE ITEMS

636 17 V-TAG:D5DN-5RWX CHECK VALVE ASME CLASS 600 DUAL 20 20"-D5DN-5RWX 1

PLATE RF FLGD DUAL PLATE TYPE
18 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 1 1"-D5DN-2RBX 1
RF FLGD LOP
S10 90 6
13 SUPPORTS
P-3P-SPS-12761 51 45o
ORI = D 27
450 0
S24 45 19 EL1-(0)-DS, EARTH LUG (WELDED TYPE) 20 =19624/206912 1
20 STRU. STEEL BRACKET T - TYPE ; B9A-D-724-374-507 20 P-3P-PS-15329/SREF.1 1
P-3P-SPS-12761 21 GUIDE FOR PIPE SHOE ; G11B-20-132-58 20 P-3P-PS-15329.2 1
ORI = D 22 SPECIAL SUPPORT 20 P-3P-SPS-12761/SREF.1 1
>1 S22
<4 B
23 LINE STOP ON PIPE SHOE ; LS2B-20 20 P-3P-SPS-12761.2 1
"N 24 HOLD DOWN GUIDE FOR PIPE SHOE ; G12B-20-132-51 20 P-3P-SPS-12761.3 1
E 202938 20 25 PTFE SLIDING PACKAGE ; SPL-20-130-P 20 P-3P-SPS-12761.4 1
F8 S25
N 22016
P-3P-SPS-12761
EL +40084
ORI = D
CONT. ON CUT PIPE LENGTH
SHT. 5 671 3
PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
20"x12"NB NO (mm) (INS) NO (mm) (INS)
S23 92MM OFFSET <1> 763 20 <2> 650 20
P-3P-SPS-12761 FLAT SIDE DOWN <3> 6240 20 <4> 2433 20
ORI = D

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 4 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 200
B36.10, BEVEL END, DS01 NACE, S40

FITTINGS

2 REDUCER ECC, WELDED ASTM A815 UNS S31803 WP-W + 20 x 12 REX42DBWN2004124S 1

100% RT, ASME B16.9, BUTT WELD, DS01 NACE, S40 x 40S
3 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E9X42EBWN2004 1
RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40

FLANGES

4 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 12 FWX31ARFDDN124S 1

RAISED FACE, ASME CLASS 600, DS01 NACE, 40S

ERECTION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

GASKETS
CONT. ON
SHT. 10 5 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 12 GAX71PDD12 2
FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
<1 ASME CLASS 600
>1
E 200661 20
"N BOLTS
N 22978 B
EL +40176 6 230 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.1/4 BSZ64BG1C230 40
DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
XYLAN 1014-GRAY COLOR

VALVES / IN-LINE ITEMS

7 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 12 12"-D5DN-2RBX 1

96 RF FLGD GOP
2 E 202938
N 22016
EL +40084
CUT PIPE LENGTH
7
HANDWHEEL/LEVER ORIENTATION S PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 200 20

FJ25
CONT. FROM
762 1 SHT. 4
67
SPV-104105
LC1
VC1 G5 B6
FJ26
3 838

20"NB F4 G5 B6

2
20"x12"NB
92MM OFFSET
FLAT SIDE DOWN

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 5 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 1099
B36.10, BEVEL END, DS01 NACE, S40

FITTINGS

2 FLANGOLET, ASTM A182 GR F51, MSS SP-97, ASME B16.5, 20 x 1 OFX31BRFDDN20040D8S 1

FLANGED RAISED FACE, ASME CLASS 600, DS01 NACE, S40 x
80S

FLANGES

3 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 2

11 RAISED FACE, ASME CLASS 600, DS01 NACE, S40
HANDWHEEL/LEVER ORIENTATION N
FJ17 SUPPORTS
94
FJ18 11 CONT. FROM 4 PIPE SHOE WITH REINF. PAD FOR HEAVY LOADS ; 20 P-3P-PS-13042.1 1
S11A-20-100-DS ; RP1-1-20-340-DS-12 ; BP2-20-146x300-P
SHT. 4 5 GUSSET FOR TWO DIRECTIONAL BRACING WITH RPAD ; 1 P-3P-PS-13029.1 1
1041-015 E 213552
GT1-1"-DS
VC1 N 23359
G7 B9 EL +40176 ERECTION MATERIALS
2 B
34 20"N
F3 G7 B9 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
NO (INS) (mm/no.)
EL +39772
FLANGES

6 FLANGE BLIND, ASTM A182 GR F51, ASME B16.5, FLANGED 1 FBX31ARFDDN0D 1

RAISED FACE, ASME CLASS 600, DS01 NACE
2 G8 B10
20"x1"NB 404 FJ31 GASKETS
1041-014
S5 7 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 20 GAX71PDD20 4
VC1 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
P-3P-PS-13029
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
6 FJ32 ASME CLASS 600
216 8 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 1 GAX71PDD0D 2
5 EL +39552
52 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
E 212010 G8 B10 THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
N 23359 ASME CLASS 600
EL +39525 BOLTS
S4 12
51 9 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 72
P-3P-PS-13042 11 HANDWHEEL/LEVER ORIENTATION E DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
ORI = D NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
XYLAN 1014-GRAY COLOR
10 95 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F095 8
S14 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
P-3P-PS-13042 ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
ORI = D 1014-GRAY COLOR
S13
VALVES / IN-LINE ITEMS

11 V-TAG:D5DN-2RNX BALL VALVE ASME CLASS 600 REDUCED 20 20"-D5DN-2RNX 2

PORT RF FLGD GOP
>1
<1 12 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 1 1"-D5DN-2RBX 1
RF FLGD LOP

SUPPORTS
1194
FJ19 13 STRU. STEEL BRACKET T - TYPE WITHOUT BRACING ; 20 P-3P-PS-13042/SREF.1 1
B13-D-700-500-BP
G7 14 GUIDE FOR PIPE SHOE ; G11B-20-132-59 20 P-3P-PS-13042.2 1
FJ20
F3 G7 B9 CUT PIPE LENGTH

1041-018 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
CONT. ON NO (mm) (INS) NO (mm) (INS)
VC1 <1> 1099 20
SHT. 7
11
HANDWHEEL/LEVER ORIENTATION N
E 209659
N 23359
EL +40176

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 6 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

5 PIPE
70 CONT. FROM
SHT. 6 1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 16 PAX13ABEN1604 2111
B36.10, BEVEL END, DS01 NACE, S40
E 209659 2 PIPE, SEAMLESS ASTM A790 UNS S31803, ASME B36.19, 1 PAX11BBEN0D8S 549
N 23359 BEVEL END, DS01 NACE, 80S
7
17 F8 B17
EL +40176 FITTINGS
B
EL +40125 6 "N
1 3 3 REDUCER ECC, WELDED ASTM A815 UNS S31803 WP-W + 20 x 16 REX42DBWN20041604 1
20"x16"NB 100% RT, ASME B16.9, BUTT WELD, DS01 NACE, S40 x S40
51MM OFFSET 4 WELDOLET, ASTM A182 GR F51, MSS SP-97, BUTT WELD, 16 x 1 OWX31ABWN16040D8S 1
DS01 NACE, S40 x 80S
FLAT SIDE DOWN 5 TEE EQUAL, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 1x1 TEX41DBWN0D8S 1
4 B16.9, BUTT WELD, DS01 NACE, 80S
16"x1"NB 6 REDUCER ECC, SEAMLESS ASTM A815 UNS S31803 WP-S, 1 x 3/4 REX41DBWN0D8S0C8S 1
ASME B16.9, BUTT WELD, DS01 NACE, 80S x 80S
7 ELBOW 90, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 1 E9X41EBWN0D8S 1
B16.9, R=1.5D, BUTT WELD, DS01 NACE, 80S

FLANGES

8 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 1

RAISED FACE, ASME CLASS 600, DS01 NACE, S40
9 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 16 FWX31ARFDDN1604 1
RAISED FACE, ASME CLASS 600, DS01 NACE, S40
10 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 1 FWX31ARFDDN0D8S 1
53
12 RAISED FACE, ASME CLASS 600, DS01 NACE, 80S
11 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FWX31ARFDDN0C8S 1
RAISED FACE, ASME CLASS 600, DS01 NACE, 80S

SUPPORTS

12 PIPE SHOE WITH REINF. PAD FOR HEAVY LOADS AT LINE 16 P-3P-SPS-12765.1 1
19 STOP ; S11B-16-100-DS ; RP1-1-16-340-DS-12 ;
21 BP2-16-100x250-P
13 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-1-75x80-P 1 P-3P-PS-13030.1 1

ERECTION MATERIALS
S12
P-3P-SPS-12765 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
ORI = D NO (INS) (mm/no.)

S24 FLANGES
P-3P-SPS-12765 14 FLANGE BLIND, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FBX31ARFDDN0C 1
ORI = D RAISED FACE, ASME CLASS 600, DS01 NACE
S22
GASKETS

429
15 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 1 GAX71PDD0D 2
1041-019 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
> 1 S23 NC THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
<3 VC1 ASME CLASS 600
P-3P-SPS-12765
16 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 3/4 GAX71PDD0C 2
ORI = D CONT. ON FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
3P-01-PL-D5DN-104106 THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
4103-TOYO20-92DJ-1300-694 ASME CLASS 600
E 206658 E 209106 BOLTS
N 23359 N 23835
EL +40125 216 EL +39696 17 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 24
20 DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
HANDWHEEL/LEVER ORIENTATION U G15 B18 NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
CONT. ON F9 XYLAN 1014-GRAY COLOR
7
SHT. 8 10

<1> 2
18 95 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F095 8
F10 G15 B18 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
6 FJ07
ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
1"x3/4"NB FJ06 1014-GRAY COLOR
3MM OFFSET 5 19 90 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F090 8
F11 G16 B19 1"x1"NB
FLAT SIDE DOWN (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
14 <2 ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
FJ05 >2 1014-GRAY COLOR
38
E 208403 47
N 23835 115 6 VALVES / IN-LINE ITEMS
S13
EL +39693 G16 B19 P-3P-PS-13030 20 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 1 1"-D5DN-2RBX 1
FJ04 ORI = D RF FLGD LOP
S25 21 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 3/4 0.75"-D5DN-2RBX 1
1041-024
RF FLGD LOP
NC 191
VC1 SUPPORTS

S26 22 SPECIAL SUPPORT 16 P-3P-SPS-12765/SREF.1 1

P-3P-PS-13030 7 23 LINE STOP ON PIPE SHOE ; LS2B-16 16 P-3P-SPS-12765.3 1
24 GUIDE FOR PIPE SHOE ; G11B-16-132-59 16 P-3P-SPS-12765.2 1
ORI = D EL +39696 25 STRU. STEEL BRACKET T - TYPE ; B9B-A-250-125-306-BP 1 P-3P-PS-13030/SREF.1 1
26 GUIDE FOR PIPE SHOE ; G11A-1-92-49 1 P-3P-PS-13030.2 1
21
HANDWHEEL/LEVER ORIENTATION D
CUT PIPE LENGTH

PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 149 1 <2> 400 1
<3> 2111 16

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 7 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 16 PAX13ABEN1604 1226
B36.10, BEVEL END, DS01 NACE, S40

FITTINGS

2 REDUCER ECC, WELDED ASTM A815 UNS S31803 WP-W + 20 x 16 REX42DBWN20041604 1

E 206658 100% RT, ASME B16.9, BUTT WELD, DS01 NACE, S40 x S40
N 23359 3 WELDOLET, ASTM A182 GR F51, MSS SP-97, BUTT WELD, 16 x 1 OWX31ABWN16040D8S 1
EL +40125 DS01 NACE, S40 x 80S
LV
1040 CONT. FROM FLANGES
FJ22 96 SHT. 7
09 20 4 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 1
RAISED FACE, ASME CLASS 600, DS01 NACE, S40
9 5 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 16 FWX31ARFDDN1604 1
FC FJ21 RAISED FACE, ASME CLASS 600, DS01 NACE, S40
VC1
SUPPORTS
G7 B8
6 STANDARD WELDED SHOE WITH REINF. PAD ; S3-16-350-DS ; 16 P-3P-SPS-12770.1 1
F5 G7 B8 RP1-1-16-390-DS-12 ; No BP2
3
59 ERECTION MATERIALS
B
"N PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
16 NO (INS) (mm/no.)

GASKETS

7 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 16 GAX71PDD16 2

CONT. ON FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
SHT. 9 ASME CLASS 600
E 203962 BOLTS
EL +39884 N 23359
EL +39884 8 260 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.1/2 BSZ64BG1E260 40
DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
8 3
29 NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
16"x1"NB XYLAN 1014-GRAY COLOR
S6
242
P-3P-SPS-12770 INSTRUMENTS
ORI = D
9 CONTROL VALVE CL.600 RF 16 LV-1040-09 1
S11 SUPPORTS
P-3P-SPS-12770
ORI = D 10 SPECIAL SUPPORT 16 P-3P-SPS-12770/SREF.1 1
8 S10 11 PTFE SLIDING PACKAGE ; SPL-16-230-P 16 P-3P-SPS-12770.2 1
81 12 GUIDE FOR PIPE SHOE ; G11B-16-132-58 16 P-3P-SPS-12770.3 1

CUT PIPE LENGTH

S12 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
P-3P-SPS-12770 NO (mm) (INS) NO (mm) (INS)
ORI = D <1> 1226 16

>1
<1

705
E 202439
N 23359
EL +40176
2
CONT. ON
SHT. 10 F4 20"x16"NB
51MM OFFSET
FLAT SIDE DOWN

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 8 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS

PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

NO (INS) (mm/no.)

PIPE

1 PIPE, SEAMLESS ASTM A790 UNS S31803, ASME B36.19, 1 PAX11BBEN0D8S 549
BEVEL END, DS01 NACE, 80S

FITTINGS

2 TEE EQUAL, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 1x1 TEX41DBWN0D8S 1
B16.9, BUTT WELD, DS01 NACE, 80S
3 REDUCER ECC, SEAMLESS ASTM A815 UNS S31803 WP-S, 1 x 3/4 REX41DBWN0D8S0C8S 1
ASME B16.9, BUTT WELD, DS01 NACE, 80S x 80S
4 ELBOW 90, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 1 E9X41EBWN0D8S 1
B16.9, R=1.5D, BUTT WELD, DS01 NACE, 80S
14 CONT. FROM
HANDWHEEL/LEVER ORIENTATION U 1041-020 SHT. 8 FLANGES
NC E 203962
3 N 23359 5 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 1 FWX31ARFDDN0D8S 1
216 VC1 CONT. ON RAISED FACE, ASME CLASS 600, DS01 NACE, 80S
1"x3/4"NB EL +39884 6 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FWX31ARFDDN0C8S 1
3P-01-PL-D5DN-104106
3MM OFFSET RAISED FACE, ASME CLASS 600, DS01 NACE, 80S
FLAT SIDE DOWN G9 B11 4103-TOYO20-92DJ-1300-694
7 E 204292
10 SUPPORTS
FJ08 FJ09 N 23835
F6 G10 B13 7 STANDARD SHOE SUPPORT ; S12A-200-DS ; BP2-1-75x80-P 1 P-3P-PS-13032.1 1
EL +39696
F5 G9 B12
FJ10 ERECTION MATERIALS

8 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY

1"NB
FJ11 NO (INS) (mm/no.)
G10 B13 38
2 FLANGES
E 203589 1"x1"NB
N 23835 115 8 FLANGE BLIND, ASTM A182 GR F51, ASME B16.5, FLANGED 3/4 FBX31ARFDDN0C 1
RAISED FACE, ASME CLASS 600, DS01 NACE
EL +39693
1041-025
<2 GASKETS
NC 191 >1
VC1 9 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 1 GAX71PDD0D 2
15 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
HANDWHEEL/LEVER ORIENTATION D ASME CLASS 600
S7 10 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 3/4 GAX71PDD0C 2
P-3P-PS-13032 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM

187
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ORI = D ASME CLASS 600

47 BOLTS
6
11 100 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 5/8 BSZ64BG0F100 4
S16 DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
XYLAN 1014-GRAY COLOR
12 95 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F095 4
(IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,
ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
1014-GRAY COLOR
13 90 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS DS05 5/8 BSZ64BG0F090 8
S17 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY NUTS,

<1> 1
P-3P-PS-13032 ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD XYLAN
ORI = D 1014-GRAY COLOR

VALVES / IN-LINE ITEMS

14 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 1 1"-D5DN-2RBX 1

RF FLGD LOP
15 V-TAG:D5DN-2RBX BALL VALVE ASME CLASS 600 FULL PORT 3/4 0.75"-D5DN-2RBX 1
RF FLGD LOP

SUPPORTS

16 STRU. STEEL BRACKET T - TYPE ; B9B-A-250-125-307-BP 1 P-3P-PS-13032/SREF.1 1

17 GUIDE FOR PIPE SHOE ; G11A-1-92-49 1 P-3P-PS-13032.2 1

CUT PIPE LENGTH

4
EL +39696 PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 149 1 <2> 400 1

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 9 / 11 -1
02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS
CONT. ON PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
SHT. 11 4 NO (INS) (mm/no.)
E 203700 EL +45283
N 25023 98 PIPE
<5> 1 12
EL +45283
<4> 2 20"NB 1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 20 PAX13ABEN2004 7211
B36.10, BEVEL END, DS01 NACE, S40
14"NB
2 PIPE, SEAMLESS ASTM A106 GR B, ASME B36.10, BEVEL END, 14 PAC11ABEG14ST 1298
72 8
10 CS01, STD

515
20"NB S22
FITTINGS
198
P-3P-SPS-12797 3 TEE EQUAL, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 x 20 TEX42DBWN2004 1
RT, ASME B16.9, BUTT WELD, DS01 NACE, S40
S13 4 TEE RED, WELDED ASTM A815 UNS S31803 WP-W + 100% RT, 20 x 12 TRX42DBWN2004124S 1
MATL ASME B16.9, BUTT WELD, DS01 NACE, S40 x 40S
A2 5 FLANGOLET, ASTM A182 GR F51, MSS SP-97, ASME B16.5, 20 x 2 OFX31BRFDDN2004024S 3
FLANGED RAISED FACE, ASME CLASS 600, DS01 NACE, S40 x
MATL D5DN

1212
40S
INSUL 6H1 6 ELBOW 45, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E4X42EBWN2004 1
RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40
7 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 20 E9X42EBWN2004 3
S14 RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, S40
7 P-3P-PS-12795 8 TRUNNION END PLATE ; 14-CS 14 P-3P-PS-12795/PLAT.1 1

FLANGES
>1
<3 9 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 20 FWX31ARFDDN2004 1
RAISED FACE, ASME CLASS 600, DS01 NACE, S40
S20 02
54 SUPPORTS
P-3P-SPS-12808
ORI = D 10 EL4, EARTH LUG (FOR WELDED SHOE) 20 =19624/206913 1
11 PIPE SHOE WITH REINF. PAD FOR HEAVY LOADS ; 20 P-3P-PS-13054.1 1
S12 S11A-20-100-DS ; RP1-1-20-340-DS-12 ; BP2-20-146x300-P
12 STANDARD WELDED SHOE WITH REINF. PAD ; S3-20-400-DS ; 20 P-3P-SPS-12808.1 1
P-3P-SPS-12808 RP1-1-20-440-DS-12 ; BP2-20-165x300-P
ORI = D 52 13 TRUNION REINFORCEMENT PAD ; RP3-1-20-506-DS-12.00 20 P-3P-PS-12795.1 1
15 S21 14 HORIZONTAL TRUNNION SUPPORT ; TR1B-20-14-1500-DS 14 P-3P-PS-12795/SREF.1 1

ERECTION MATERIALS
7
EL +43556 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
NO (INS) (mm/no.)
346 GASKETS
CONT. ON
1143

3P-12-PL-D5DN-104512-6H1 15 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 20 GAX71PDD20 2

4 4103-TOYO20-92DJ-1300-012 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
20"x12"NB E 198644 THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600
EL +42413 N 25023
<2> 1

5 EL +42413 BOLTS
20"x2"NB 16 290 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 1.5/8 BSZ64BG1F290 48
404
1265

ORIENTATION DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
E 45.00 S NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
CONT. ON G15 B16 XYLAN 1014-GRAY COLOR
CONT. ON 3P-01-CI-D5DCN-104101-6H1
1194 VALVES / IN-LINE ITEMS
EL +41149 3P-01-CI-D5DCN-104103-6H1 4103-TOYO20-92DJ-1300-701
4103-TOYO20-92DJ-1300-699 E 202439
286 E 199534 FJ23 17 V-TAG:D5DN-2RNX BALL VALVE ASME CLASS 600 REDUCED 20 20"-D5DN-2RNX 1
E 198584 N 23359 PORT RF FLGD GOP
N 23787
N 24737 EL +40176
EL +40580 SUPPORTS
286 EL +41149
17 CONT. FROM
18 STRU. STEEL BRACKET T - TYPE WITHOUT BRACING ; 20 P-3P-PS-13054/SREF.1 1
S19 HANDWHEEL/LEVER ORIENTATION N SHT. 8 B13-D-700-523-BP
8
P-3P-PS-13054 381 57 19 HOLD DOWN GUIDE FOR PIPE SHOE ; G12B-20-125-52 20 P-3P-PS-13054.2 1
5
973

ORI = D 20 GUIDE FOR PIPE SHOE ; G11B-20-132-58 20 P-3P-SPS-12808.2 1

20"x2"NB 9 1041-021 21 SPECIAL SUPPORT 20 P-3P-SPS-12808/SREF.1 1
Clearance (Hor) = 10mm 69
605 VC1 22 SPECIAL SUPPORT 10 P-3P-SPS-12797/SREF.1 1
899 849
351 20"NB FJ24
5
20"x2"NB F9 G15 B16 CUT PIPE LENGTH
6
S11 404 45o PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
404 S10
P-3P-PS-13054 NO (mm) (INS) NO (mm) (INS)
7 CONT. FROM <1> 1273 20 <2> 1095 20
ORI = D SHT. 5 <3> 3878 20 <4> 1298 14
<1> 1 <5> 965 20
S18 3
20"x20"NB
EL +40176

16 64 E 200661
CONT. ON 64 16 N 22978
3P-1.5-CI-D5DCN-104120-6H1
EL +40176
4103-TOYO20-92DJ-1300-697
E 198934
N 24387
EL +40580

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 10/ 11 -1

02 Feb 24 11:46 rpatil2
 FABRICATION MATERIALS
G10 B11
PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
E 203485 FJ27 9 12 NO (INS) (mm/no.)
N 23821 HANDWHEEL/LEVER ORIENTATION N
EL +50003 PIPE

1 PIPE, EFSW ASTM A928 UNS S31803 CL.1 + 100% RT, ASME 28 PAX13ABEN2825 5319
EL +49955 1042-002 B36.10, BEVEL END, DS01 NACE, 0.875"
2 PIPE, SEAMLESS ASTM A790 UNS S31803, ASME B36.10, 4 PAX11ABEN0403 1724

432
NC BEVEL END, DS01 NACE, S30
FJ28 VC2
EL +49520 FITTINGS
<1> 2
4"NB F7 G10 B11 3 REDUCER CONC, WELDED ASTM A815 UNS S31803 WP-W + 28 x 20 RCX42DBWN28252004 1
100% RT, ASME B16.9, BUTT WELD, DS01 NACE, 0.875" x S40
358 S16 4 WELDOLET, ASTM A182 GR F51, MSS SP-97, BUTT WELD, 28 x 4 OWX31ABWN28250403 1
5 EL +48820 DS01 NACE, 0.875" x S30
1067 MAINTAIN 3MM GAP BETWEEN SHOE P-3P-PS-13062
EL +46960 5 ELBOW 90, WELDED ASTM A815 UNS S31803 WP-W + 100% 28 E9X42EBWN2825 2
610 AND SECONDARY SUPPORT ORI = E RT, ASME B16.9, R=1.5D, BUTT WELD, DS01 NACE, 0.875"
28"NB S18 Guide Clearance(Ver) = 10mm

1985
6 ELBOW 90, SEAMLESS ASTM A815 UNS S31803 WP-S, ASME 4 E9X41EBWN0403 2
EL +45893 B16.9, R=1.5D, BUTT WELD, DS01 NACE, S30
3 S17
28"x20"NB P-3P-PS-13062 FLANGES
ORI = E

927
EL +48461 7 FLANGE WN, ASTM A182 GR F51, ASME B16.5, FLANGED 4 FWX31ARFDDN0403 1
RAISED FACE, ASME CLASS 600, DS01 NACE, S30

304 SUPPORTS
CONT. FROM E 203700
SHT. 10 N 25023 6 8 VARIABLE HEIGHT WELDED SHOE WITH REINF. PAD FOR 28 P-3P-SPS-12813.1 1
EL +45283 EL +47536 LARGE DIA PIPE ; S8-28-450-100-DS ; RP1-1-28-450-DS-12 ;
14 6 BP2-28-150x350-P
17
ERECTION MATERIALS
21 5
5 21 PT COMPONENT DESCRIPTION N.B. ITEM CODE QTY
NO (INS) (mm/no.)

575
4
28"x4"NB FLANGES

9 FLANGE BLIND, ASTM A182 GR F51, ASME B16.5, FLANGED 4 FBX31ARFDDN04 1

RAISED FACE, ASME CLASS 600, DS01 NACE
<2> 1
GASKETS

13 10 GASKET, UNS 31803 (ALL RINGS) WITH NON-ASBESTOS 4 GAX71PDD04 2

80 5 FILLER (E.G. GRAPHITE), SPIRAL WOUND ASME B16.20, 4.5 MM
THK (3.175 MM THK SOLID RINGS), FLEXITALLIC TYPE "CGI",
ASME CLASS 600

BOLTS

01 11 150 MM LONG, STUDBOLT, ASTM A1082 UNS S32760 MDS 7/8 BSZ64BG0H150 16
18 DS05 (IMPACT TEST AT -46 DEG C), WITH 2 HEX HEAVY
NUTS, ASME B18.31.2/B18.2.2, DEGREASED + WHITFORD
S8 XYLAN 1014-GRAY COLOR
P-3P-SPS-12813
ORI = D VALVES / IN-LINE ITEMS

12 V-TAG:D5DN-2RNX BALL VALVE ASME CLASS 600 REDUCED 4 4"-D5DN-2RNX 1

S14 PORT RF FLGD GOP
P-3P-SPS-12813
ORI = D SUPPORTS
S13
13 SPECIAL SUPPORT 28 P-3P-SPS-12813/SREF.1 1
73
55 14 GUIDE FOR PIPE SHOE ; G11B-28-132-63 28 P-3P-SPS-12813.2 1
15 SPECIAL SUPPORT 28 P-3P-SPR-10004/SREF.1 1
16 HOLD DOWN GUIDE FOR PIPE SHOE ; G12A-4-103-51 4 P-3P-PS-13062.2 1
00 17 VARIABLE HEIGHT CLAMP SHOE SUPPORT ; S6-4-300-120-DS 4 P-3P-PS-13062.1 1
25 ; CP1-1-4-HT/CL ; BP2-4-152x80-P
18 STRU. STEEL BRACKET VERT. PIPE ; B15F-A-300-316 4 P-3P-PS-13062/SREF.1 1

CUT PIPE LENGTH

P-3P-SPR-10004
PIECE CUT LENGTH N.B. REMARKS PIECE CUT LENGTH N.B. REMARKS
NO (mm) (INS) NO (mm) (INS)
<1> 1724 4 <2> 663 28
<3> 4656 28 FF WELD

S15
>1
<3 B
"N
28
FFW
CONT. ON TP-3P-M1042-02A
3P-20-PL-D5DN-104016-6H1-INT-3P-4P
4103-TOYO20-92DJ-1390-004
E 198127
N 22225
EL +46960

DSS

D5DN 600

4103-MI20-90DP-1040-001 3P 3P PIPING ISOMETRIC DRAWING

3P-20-PL-D5DN-104016-6H1 4103-TOYO20-92DJ-1300-011 11/ 11 -1

02 Feb 24 11:46 rpatil2