Bio Notes-1

BIOLOGY
COMBINED SCIENCE NOTES
MUSARA.T.
FORM 3 & 4
BIOLOGY
COMPILED BY T. MUSARA pg. 1

 CELLS AND LEVELS OF ORGANISATION
 NUTRITION
 RESPIRATORY SYSTEMS
 TRANSPORT SYSTEM
 REPRODUCTION
 HEALTH AND DISEASE

CELLS AND LEVEL OF ORGANISATIONS
SPECIALISED CELLS
Different types of cells carry out specific functions and when all cells combine their
functions, they can share out the processes of life.
Each cell is dependent on the other and all of them function collaboratively to support the
diverse processes in an organism
When cells are specialised they carry particular job and develop a distinct shape. The
changes in shape enable the cell to carry out its special function.
Red blood cell (erythrocytes)
Its function is to transport oxygen from lungs to body tissues and carbon dioxide from
body tissue to the lungs.
Lacks a nucleus to increases surface area for absorption of oxygen.

Their biconcave shape and flexibility allow them to pass along small capillaries.
Contains haemoglobin (red pigment) which carries oxygen needed for cell respiration to
produce energy.
Muscle cell
It is responsible for contraction when stimulated by a nerve so that movement occurs.

They are long and thin and have the ability to change their shape when they contract.
Have large numbers of mitochondria to provide energy for muscle contraction.

Palisade cell
Its function is to make food by photosynthesis.

Packed with chloroplasts that contain chlorophyll for absorption of light.
They are columnar and closely packed to increase surface area for absorption of sunlight
and carbon dioxide.
Root hair cell
Responsible for absorption of water and salts from the soil.

Have thin cell walls to allow water and nutrients to pass easily from the soil
They are numerous to increase surface area for absorption of water and mineral salts as
they are in close contact with the soil.
The hair like projection on each cell penetrates between the soil particles and offers a large
absorbing surface area.
Large vacuole facilitates water absorption and storage.

ECOSYSTEMS
An ecosystem is a self contained system of interdependent organisms and their physical
environment.
Components of an Ecosystem
An ecosystem consists of two components i.e.

• Physical (abiotic) components which include all the nonliving factors like
humidity, temperature, air, soil, water, light e.t.c.
• Biological (biotic) components which include all living organisms i.e. fungi, plants
and animals, bacteria.
NATURAL ECOSYSTEM
Describes the influence of the environment in determining which organisms survive.
In a natural ecosystem there is close interaction between the plants and animals. There is a
natural balance of nature. Better adapted organisms survive to reach maturity and produce
offspring
Nutrients are naturally recycled by decomposers

Pests and disease are part of the natural ecosystem and no control measures are taken to
limit them
Food chain
It is a nutritional sequence which involves a series of organisms existing as part of an
ecosystem through which energy is transferred.
Each organism feeds on, and therefore derives energy from the preceding one.
It usually originates from producers i.e. green plants. The arrow shows the direction of
energy flow
grass → insects → dragon fly → frog → snake → eagle
Food web
A food web is made up of plants and animals which are closely linked by their feeding
relationships.

An organism may feed on more than one organism and in turn it may be source of food for
more than one organism
Pyramid of biomass
Biomass is the amount of living material.
In a balanced ecosystem, the biomass of producers should be greater than that of
herbivores whose biomass in turn should be greater than that of carnivores.
The amount of energy available for next trophic (feeding) level keeps on decreasing as
you go up the pyramid.
Energy loss in food chains and food webs

The sun is the primary source of energy. Produce at the first trophic level, trap energy by
photosynthesis i.e. 100% energy.
Consumers lose a lot of energy to the environment as heat and due to life processes such
as respiration, movement and excretion at each trophic level.
On average, about 90% of the energy is lost at each level in a food chain i.e. about 10% of
the energy of a trophic level is transferred to next trophic level.
Whatever is not used or eaten by predators at high trophic level is eaten by decomposers
like fungi & bacteria.
The number of organisms decreases from one trophic level to another because there is less
and less energy available for the next trophic level since energy is lost at each trophic level
.
NUTRIENT CYCLE
The Carbon Cycle
Carbon is recycled in the form of carbon dioxide and it is present in all organic
compounds.
Plants remove carbon dioxide from the air during photosynthesis and use it to build carbon
containing organic compounds.
Animals obtain the carbon by eating organic compounds from plants.

Carbon dioxide is released back into the atmosphere by animals, plants and
microorganisms when they respire and decay.
It is also released back into the atmosphere by human activities such as burning fossil fuels
The Nitrogen Cycle
Nitrogen is present in all proteins of both plants and animals

When animals or plants die the proteins are decomposed by fungus and bacteria. The
nitrates produced are reabsorbed by plants and then transferred to animals through
ingestion.
All plants and animal wastes reaching the ground are acted upon by a number of soil
organisms i.e. worms, millipedes, bacteria and fungi which change the materials to
ammonium compounds.
These are further decomposed by nitrifying bacteria i.e. Nitrosomonas which convert the
ammonium compounds into nitrites and Nitrobacter which converts nitrites to nitrates. It
is in this form that nitrogen is mainly absorbed by plants
About 79% of air is Nitrogen. A small portion of this is changed into ammonia by
lightning then to ammonium compounds which can be absorbed by plants.

A small fraction of the Nitrogen in air is converted into nitrates directly by nitrogen fixing
bacteria called Rhizobium which lives in nodules of some leguminous plants.
If aeration is poor, certain bacteria use the oxygen in the nitrates and in the process release
nitrogenous gas to the air in a process called denitrification.
ARTIFICIAL ECOSYSTEMS
An artificial ecosystem is one that is heavily influenced by human beings e.g. monoculture
, crop production and animal rearing.
Farming activities destroy equilibrium since the same types of plants are grown over an
area.
Strict control measures are taken to control pests and diseases.

Nutrients are often added to the soil in the form of artificial fertilizers
Grazing is controlled by use of paddocks to avoid overgrazing
BIODIVERSITY
Biodiversity is the variability within species, between species and between organisms
It is a measure of the variety of organisms present in different ecosystems.
Problems caused by limited biodiversity

Pests problem and disease outbreaks
Ecosystem becomes unstable and unbalanced
Little or no recycling of nutrients back into the soil
Soil infertility
Overgrazing and deterioration of the natural ecosystem
Production meant for human consumption
Pollution
Advantages of biodiversity
Wide variety of food source
Self sustenance of an ecosystem
Interdependence
Less spread of disease
It provide shelter, medicine and resources to mankind

NUTRITION
PLANT NUTRITION
PHOTOSYNTHESIS
Leaf structure
External structure
Most leaves are covered by a waxy cuticle on the outside which is waterproof and
prevents the plant from losing too much water through leaves. It also protects the leaf.
On the surface of most leaves there are veins which transport substances to and from
the leaf.
Leaves are attached to the stem by a petiole that can change position of the leaf so that
it always receives as much sunlight as possible for photosynthesis.
Most leaves are thin and flat with a large surface area(lamina) and the edge is called
the margin
Internal structure
Cuticle made of wax, waterproofing the leaf. It is secreted by cells of the upper
epidermis

Epidermis thin and transparent to allow light to pass through. No chloroplasts except for
guard cells. Acts as a protective layer i.e. prevents bacteria and fungi from
getting in. Stomata are present for gaseous exchange. The epidermis helps to
keep the leaf’s shape. The closely fitting cells reduce evaporation from the leaf
Palisade cells main region for photosynthesis. Cells are columnar and packed with
chloroplasts to trap light.
Spongy cells cells are more spherical and loosely packed. They contain chloroplasts, but not
as many as in the spongy mesophyll. Air spaces between cells allowing
gaseous exchange
Vascular bundle This is a leaf vein made up of xylem and phloem vessels. Xylem brings
water and minerals to the leaf while phloem transport sugars and amino acids away (
translocation)
Stomata Each stoma is surrounded by a pair of guard cells which control the opening
and closing of the stomata. Stomata allow for gaseous exchange during
photosynthesis, transpiration and respiration
Leaf adaptation for photosynthesis

✓ Their broad, flat shape offers a large surface area for absorption of sunlight and carbon
dioxide.
✓ Most leaves are thin and the carbon dioxide and light energy has to diffuse across short
distances to reach the inner cells.
✓ There are many chloroplasts in the palisade cells than spongy cells to receive most
sunlight and this will reach the chloroplasts without being absorbed by too many cell
walls
✓ The large spaces between spongy cells inside the leaf provide an easy passage through
which carbon dioxide can diffuse
✓ There are many stomata to allow for the exchange of carbon dioxide and oxygen with
the air outside
✓ Palisade cells closely packed and elongated to increase surface area for absorption of
sunlight

✓ The branching network of veins provides a good water and mineral ions from the roots
to the leaves during photosynthesis
Factors affecting rate of photosynthesis
Light intensity
Place a moveable light source at varying distances and count the number of bubbles of
oxygen produced per minute. These reflect the rate of photosynthesis
The rate of bubbling should decrease as the lamp is moved further away from the plant.
Assuming that the bubbles contain oxygen produced by photosynthesis, as the light
intensity is increased the rate of photosynthesis (as indicated by the rate of oxygen
bubble production) increases. This is because the plant uses the light energy to
photosynthesise and oxygen is produced as a waste product.
As light intensity increases, so does the rate of photosynthesis.
Carbon dioxide concentration

Add varying amounts of sodium hydrogen carbonate, each time recording the number
of bubbles produced per minute at each level. Sodium hydrogen carbonate which
releases carbon dioxide into the water. More carbon dioxide becomes available to the
plant as more sodium hydrogen carbonate is added to the water.
As the concentration of available carbon dioxide is increased, the number of bubbles

released also increases. So an increase in carbon dioxide increases the rate of
photosynthesis.
Effect of water on photosynthesis

Water is necessary for the chemical reaction to take place. Plants need water to be
turgid. If a plant does not have enough water the stomata will close hence the plant will
not absorb carbon dioxide which is needed for photosynthesis.
Effect of chlorophyll on photosynthesis

The chloroplasts contain the green pigment chlorophyll. The chlorophyll traps light
energy and converts the light to chemical energy in form of carbohydrates. Without
chlorophyll to trap light energy photosynthesis cannot take place.

Effect of temperature on photosynthesis
As temperature increases so does the rate of photosynthesis
A rise in temperature will increase the rate at which carbon dioxide is combined with
hydrogen to make carbohydrate.
Products of photosynthesis
Testing a leaf for starch
Boil the leaf in hot water to kill the cells and stop all chemical reactions and make the
leaf permeable to iodine solution
Boil the leaf in alcohol to decolorize it.

Precaution: extinguish all flames because alcohol is highly flammable.
Dip the leaf in hot water to soften it and wash away the methylated spirit.
Place the leaf on a white tile and add iodine solution.
Blue black colour shows the presence of starch.
Test for oxygen

Place a pond weed in water and invert a short stemmed funnel over it
Fill a test tube with water and invert it over the stem of the funnel without letting any
water to escape.
Place the apparatus in sunlight for about 46 hours and observe what happens.
Remove the test tube by lifting it upwards so that the gas remains in it

Test the gas in the test tube with a glowing wooden splint.
The glowing splint bursts into flames or glows brighter. Relighting of the splint
indicated presence of oxygen in higher concentration than in ordinary air.
Fate of end products of photosynthesis
Glucose
Glucose is converted to starch in leaf cells for temporary storage to prevent osmotic
effects on leaf cells during the day.
At night starch is converted to sucrose in leaves. Sucrose is translocated through

phloem vessels to storage organs e.g. roots, stem tubers or fruits. Some
carbohydrates are converted to
1 amino acids which are used to make proteins to make enzymes and for structural
purpose e.g. cell
2 Cellulose for cell wall formation.

3 Lipids for cell membranes
Oxygen
Oxygen released into the atmosphere as a byproduct and is used for respiration by
plants and animals.
HUMAN NUTRITION
BALANCED DIET

A balanced diet is a diet that contains all the essential nutrients in their correct
proportions.
Components of a balanced diet
Carbohydrates
Carbohydrates are energy rich foods that are largely made up of starch and sugars.
They are easily broken down to glucose which helps the body generate energy through
cellular respiration.
Supplies dietary fibre.

Starch is abundant in potatoes, bread, maize, rice and other cereals. Sugar appears in
our diet mainly as sucrose (table sugar) which is added to drinks and many prepared
foods such as jam, biscuits and cakes. Glucose and fructose are sugars that occur
naturally in many fruits and some
Lipids (fats and oils)

Supplies energy and heat. They contain higher energy values per gram than
carbohydrates.
Help the body to absorb certain vitamins

Form structural components of cell membranes
Help in blood clotting
Stored fats help to cushion internal organs and protect the body from extreme cold
Animal fats are found in meat, milk, cheese, butter and eggyolk. Plant fats occur as
oils in fruits (e.g. palm oil) and seeds (e.g. sunflower seed oil), and are used for
cooking and making margarine.
Proteins
Promotes growth and repair of body tissues
Builds antibodies to fight infection
Supplies energy in the absence of carbohydrates
Speed up chemical reactions and serve as chemical messengers in the body
Lean meat, fish, eggs, milk and cheese are important sources of animal protein. All
plants contain some protein, but soybeans, seeds such as pumpkin, and nuts are the best

sources.
Vitamins
Allow the body to grow and develop
Play important roles in metabolism, immunity i.e. they help to fight infections and
digestion and are required in minute quantities in order for metabolism to occur
• Vitamin A (retinol) – Needed for growth and reproduction. Promote good sight and
vision especially in dim light. Maintain the health of skin and membranes. Helps
develop bones and teeth. Helps fight infection. Sources include green vegetables,
spinach, liver, egg, palm oil
• Vitamin C (ascorbic acid) – maintains healthy teeth and gums. Helps wound
healing and helps the body to use iron. It acts as an antioxidant that protects the
body from harmful free radicals. It forms part of an enzyme needed for protein
metabolism and maintaining healthy immune system. Sources include oranges,
lemons, tomatoes, guava, pawpaw, mango, green vegetables
• Vitamin D (calciferol) – for bone formation and maintain teeth. Helps the body to
use calcium and phosphorus. When exposed to sunlight, the skin produces vitamin
D. Sources include liver, milk, egg yolk, fishliver oils.
Mineral salts
Essential for the chemical activities (enzyme action) in the body and for construction
of certain tissues.
• Iodine – for the formation of hormone thyroxin in the thyroid gland which
help to control many processes in the body like growth and development.
• Calcium for the formation of strong bones and teeth. It is also needed for
proper muscle contraction and relaxation. Promotes proper functioning of
nerves, regulating blood pressure and normal blood clotting. The richest
sources of calcium are milk (liquid, skimmed or dried) and cheese, but calcium
is present in most foods in small quantities and also in ‘hard’ water
• Iron – for the formation of haemoglobin in the red blood cells and transport
oxygen in the body. Red meat, especially liver and kidney, is the richest source
of iron in the diet, but eggs, groundnuts, whole grains such as brown rice,

spinach and other
Dietary Fibre
It is made up of cellulose (plant fibre) and it aid digestion process by helping bowl
movement through the digestive tract.
The fibre itself and the bacteria, which multiply from feeding on it, add bulk to the
contents of the colon and help it to retain water. This softens the faeces and reduces the
time needed for the undigested residues to pass out of the body. Both effects help to
prevent constipation and keep the colon healthy.
Fibre binds with cholesterol to reduce cholesterol levels in the blood

Good sources of dietary fibre are vegetables, fruits and whole wheat bread.
Water
About 70% of most tissue consists of water; it is an essential part of cytoplasm. The
body fluids, blood, lymph and tissue fluid are composed mainly of water.
Water acts as a solvent and as a transport medium for digested foods, salts, vitamins
and urea.
Digestion is a process that uses water in a chemical reaction to break down insoluble
substances to soluble ones. These products then pass, in solution, into the bloodstream.
In all cells there are many reactions in which water plays an essential part as a reactant
and a solvent.
Regulates body temperature through sweating and evaporation
Balanced meal for different groups of people
Toddler
Breast feeding can continue until two years and even beyond
The child needs extra protein for making new tissues as the child grow.
Large amounts of starchy foods such as cassava, potatoes or rice should be avoided
because the child soon feels full up yet may not have taken in sufficient protein.
The child should be given protein rich food such as meat, chicken, fish or eggs every
day. These will help build strong muscles.
Give a variety of fruits everyday these provide vitamin and healthy fibre

Give dark green and yellow vegetables , as they are rich in vitamins for protection
against diseases
They need extra Calcium for growing bones, iron for their RBC
Encourage the toddler to drink clean, fresh water throughout the day
Adolescent
Vigorously active, playful and growing. Needs a balanced diet with increased protein,
calcium, vitamin D and phosphates for rapid growth, bone and teeth development.
They need high quality of body building foods and starchy foods to provide energy and
dietary fibre.
Drink clean safe water
Manual worker
Is a person who does physical work for most of the day e.g. builder, road worker
Uses a lot of energy and sweats a lot therefore need a balanced diet with higher energy
giving foods, more salts and water to replace lost energy, water and salts.
Increase the amount of proteins eaten to provide for strong muscles
Sugary foods can be eaten in moderation, as they will provide quick energy.
Drink lots clean safe water if working in hot sun
Eat plenty of vegetables and fruits everyday
Sedentary worker (office worker)

Usually office workers do not move around a lot at work. Needs a balanced diet with
less energy giving foods to avoid overweight.
Avoid sugary and high fat foods as this can cause obesity.
Eat plenty of different varieties of vegetables, fruits, legumes and small portions of
protein
Nutrients are needed for normal functioning of the body
ALIMENTARY CANAL

FUNCTIONS OF PARTS OF THE ALIMENTARY CANAL
Ingestion
It is the intake of complex organic food into the body through the mouth (eating) and
chewing it into smaller pieces.
The mouth, tongue and teeth are involved with ingestion. The teeth chop and grind
food into smaller pieces, increasing surface are of the food on which enzymes can act.
Saliva, produced by salivary glands also moisten food, allowing us to taste it and make
it easier to swallow
The food bolus is rolled into bolus and pushed to the back of the mouth ready to be
swallowed
Human Teeth
Teeth chop and grind the food into smaller pieces, increasing the surface area of the
food on which enzymes can act.
Types of teeth and their functions

Each type of tooth is specialised to perform a particular function.
From the centre of each jaw outwards, one half of each jaw contains two incisors, one
canine, two premolars and three molars.

There are normally 32 permanent teeth in an adult human.
Incisor
Are eight teeth in front center of the mouth (4 on top and 4 on bottom jaw)
They are chisel shaped teeth (flat teeth with flat edges) to provide a cutting surface.
They are used for biting and cutting food.

They have a single root to support the tooth in the jaw.
Canines
They are pointed teeth found on either side of incisors.
They are used for gripping and tearing food.
They have a single root for supporting the tooth in the jaw.
Premolars
Have a flat surface with cusps suitable for crushing and grinding.
They are used for crushing and grinding (chewing) food. Small ridges on the surface
also helps with grinding
They have two roots for support.
Molars
Are the largest teeth with a large flat biting surface
Their function is similar to that of the premolars, to grind and crush food
Digestion
Is the breakdown of food into simpler soluble inside the organism.
Digestion takes place in the mouth, stomach and small intestines.

There are two types of digestion i.e.
a) Mechanical (physical) digestion – Involves the physical break down of food
into smaller particles, increasing surface area over digestive enzymes can act.
This is achieved by the chewing actions of the teeth in the mouth and churning
food in the stomach and intestine. Bile physically digests fats by emulsifying
them – turning them into small droplets with a large surface area
b) Chemical digestion – Is the use of enzymes to break down large, insoluble

molecules into small, simpler molecules that can easily be absorbed through the
lining of the gut to the blood vessels. It starts in the mouth, continues in the
stomach and is completed in the small intestines.
Digestion in the mouth

The food is chewed by the teeth in the mouth (mechanical digestion) and broken down
into smaller molecules. The food is mixed with saliva.
Saliva helps to moisten and lubricate the food making it slippery and allowing it to
move down the alimentary canal easily.
Saliva contains also contains an enzyme called salivary amylase which starts the
chemical digestion of cooked starch and converts it to maltose The food is rolled into
bolus and pushed to the back of the mouth ready to be swallowed.
Swallowing

The beginning of swallowing action is voluntary, but once the food reaches the back
of the mouth, swallowing becomes automatic.
The food bolus is forced into and down the oesophagus by peristalsis.
Peristalsis involve the involuntary rhythmic contraction and relaxation of the muscles
throughout the alimentary canal.
The walls of the oesophagus contains two layers of muscle i.e. the circular and the
longitudinal muscles. Circular muscles behind the food bolus contracts, constricting
the oesophagus or intestines pushing the bolus forward while longitudinal muscles
ahead of the bolus contracts, widening the oesophagus to allowing the bolus to move
along the gut.
Digestion in the stomach

The muscles in the walls of the stomach alternately contract and relax churning and
squeezing the food and mixing food with gastric juice to form chyme. This action
gives the food a greater surface area so that it can be digested more efficiently.
Glands in the lining of the stomach produce gastric juice which contains mucus,
enzymes (rennin & pepsin) and hydrochloric acid.
✓ Hydrochloric acid kills any bacteria that the stomach with food. It provides the
proper medium of action of pepsin (buffer). Hydrochloric acid dissolves
insoluble minerals (hydrolysis)
✓ Rennin assist in the coagulation of milk protein thus preventing it from

passing too rapidly through the alimentary canal before it can be digested.
✓ Pepsin to breakdown proteins into polypeptides.

✓ Mucus lines the stomach to protect the stomach tissues from hydrochloric acid
Digestion in the small intestines

Duodenum
Pancreatic juice from the pancreas and bile from liver are poured into the duodenum.
The food from the stomach is acted upon by several enzymes found in the pancreatic
juice. These enzymes chemically break down the food making it smaller and more
soluble and so more easily absorbed by the body.

✓ Pancreatic amylase acts on starch that were not digested in the mouth
converting it to maltose
✓ Trypsin acts on proteins breaking them to peptides and then amino acids
which are more soluble
✓ Pancreatic lipase hydrolyses fats into fatty acids and glycerol. The digestion of
fats is aided by bile. Bile emulsifies fats, splitting their large molecules into a
smaller milky colloid called an emulsion so that lipase can act on fats more
readily. Bile also neutralise the acidic chyme
Ileum
All digestion is completed here. The walls of the ileum secrete several digestive
juices with various enzymes to complete digestion of food produce intestinal juice
which contains enzymes that will complete the digestion of all food substances.
✓ Maltase breaks down maltose to glucose

✓ Sucrose breaks down sucrose to glucose and fructose
✓ Lipase breaks fats into fatty acids and glycerol
✓ Trypsin breaks polypeptides to amino acids
The importance of digestion

Digestion reduces molecule size and improves solubility so that food can be absorbed
and transported to all parts of the body.
The action of amylase on starch

Half fill a beaker with water and warm it to about 40oC.

Place equal quantities of starch solution in to each test tube. To one test tube add
10cm3 of 1% salivary amylase and mix.
Remove a small amount of starch solution from both test tubes after intrevals of five
minutes. Test the samples for the presence of starch.
The iodine test showed increasingly negative results when testing for starch in the test
tube that contained saliva. The test tube that contained only starch solution continued
to give the same positive results for starch. This is because the amylase enzyme
present in saliva gradually digested the starch to a reducing sugar.
Since iodine tests only for starch, it would detect the products of starch digestion and
therefore would result in a negative test.
The end products of digestion

End products are simple molecules that are soluble in water i.e. can diffuse through
tissues and can be absorbed and used for metabolic functions.
✓ Carbohydrates – glucose, fructose, galactose (simple sugars)

✓ Proteins – amino acids
✓ Fats – fatty acids and glycerol
Absorption

It is the process of taking in of soluble food substances through the epithelium of

ileum into the bloodstream.
Absorption in the ileum
The end products of digestion are absorbed into the blood stream in the ileum while
fatty acids and glycerol pass into the lacteals connected to the lymphatic system.

The ileum has certain characteristics that make it efficient in the absorption of
digested food i.e.
✓ The ileum is usually fairly long and presents a large absorbing surface to the
digested food.
✓ The internal surface is greatly increased by circular folds bearing thousands of

tiny fingerlike projections called villi. This gives a larger surface area for
absorption of nutrients
✓ The lining epithelium is very thin and the fluids can pass rapidly through it to
reach the blood capillaries and lacteals
✓ There is a dense network of blood capillaries in each villus. Most digested

food enters the capillaries directly except for fatty acids which enter a tube in
the middle of the villus called lacteal.
The small molecules of digested food molecules pass through the epithelial cells and
then through the wall of the capillaries in the villus and into the blood plasma by
diffusion.
They are then carried away in the capillaries which join to form the hepatic portal
vein. This carries all the blood from the intestines to the liver, which may retain or
alter any of the digestion products. The digested food then reaches the general
circulation.
Digested fats , enter the blood capillaries of the villi but a large proportion may be
recombined in the intestinal lining to form fats and then these fats pass into the
lacteals
Some molecules pass in the same direction by active uptake e.g. salts. Energy is
required to absorb these molecules
Absorption in large intestines

The material passing into the large intestines consists of water with undigested matter,
largely cellulose and fibres, mucus and dead cells from the lining of the alimentary
canal

The bacteria in the colon digest part of the fibre to produce vitamin B. The colon
absorbs most of the water and vitamin B from the undigested residues.
Assimilation
It is the utilization of absorbed nutrients by body cells in metabolic processes. The
products of digestion are carried round the body in the plasma. From the blood, most
living cells are able to absorb and metabolise glucose, fats and amino acids
Glucose
During respiration in the cells, glucose is oxidised to carbon dioxide and water. This
reaction provides energy to drive the many chemical processes in the cells, which
result in, for example, the buildingup of proteins, contraction of muscles or electrical
changes in nerves.
Fats
These are built into cell membranes and other cell structures. Fats also form an
important source of energy for cell metabolism. Fatty acids produced from stored fats
or taken in with the food, are oxidised in the cells to carbon dioxide and water. This
releases energy for processes such as muscle contraction. Fats can provide twice as
much energy as sugars.
Amino acids
These are absorbed by the cells and built up, with the aid of enzymes, into proteins.
Some of the proteins will become plasma proteins in the blood. Others may form
structures such as cell membranes or they may become enzymes that control the
chemical activity within the cell. Amino acids not needed for making cell proteins are
converted by the liver into glycogen, which can then be used for energy. Excess is
deaminated in the liver to form glycogen and urea
Egestion
It is the elimination from the body of the undigested food substances and wastes
through the anus.

The semisolid wastes (faeces) are passed into the rectum by peristalsis and is
expelled at intervals through the anus.
MALNUTRITION
It is undernourishment or overnourishment i.e. lack of balanced diet either because of
shortage of a particular nutrient or an excess
It is a disorder of nutrition resulting from unbalanced diet.

Effects of malnutrition
Obesity
Is caused by high intake of carbohydrates which results in excess being stored as fat
under the skin. The person may gain weight and become obese
Effects
Increased risk of developing heart diseases, type 2 diabetes and bone and joint
diseases
Anorexia nervosa
Involves selfstarved and excessive weight loss
The body is denied the essential nutrients it needs to function normally, so it is forced
to slow down all its processes to conserve energy
Effects
Heart failure as heart rate and blood pressure becomes lower
Muscle loss and weakness
Severe dehydration which can result in kidney failure Fatigue
Diabetes mellitus 2
Occurs as a result of obesity and not enough exercise
Effects
Risk of cardiovascular diseases/heart diseases
Stroke
Blindness

Kidney failure
DEFICIENCY DISEASES
A deficiency disease is a disease caused by the lack of an element in the diet, usually
a particular protein, vitamin or mineral salts possibly stemming from insufficient
intake, absorption or utilization of a nutrient.
Kwarshiorkor Is caused by lack of proteins in a diet. Children with kwarshiorkor are under
weight but have an enlarged abdomen caused by a swollen liver. The children
are inactive and irritable. To recover, the child is fed a high protein diet in the
form of dried skimmed milk.
Goitre Goitre is a swelling or large mass on the throat which results from abnormal
growth of the thyroid gland. Goitre is caused by lack of iodine in the diet lack
iodine can lead to stunted growth, deafness and mental retardation. Use of
iodised salt prevents the development of goitre
Scurvy Is caused by lack of vitamin C in a diet. A person with scurvy bruises and has
joint and muscles pains. It is also causes dry skin and tooth loss. Scurvy is
treated by taking tablets containing vitamin C and eating fresh citrus fruits
and yellow vegetables
Anaemia Is caused by lack of iron. Without iron the body is unable to make enough
haemoglobin so that the blood so that the blood cannot carry enough oxygen
to body cells hence less energy is made available in cells leading to tiredness
and weakness, a condition known as anaemia. It can be corrected by eating
foods rich in iron
Night blindness Is caused by lack of vitamin A in the diet. Beriberi

Is caused by lack of vitamin B1
FOOD TESTS
Test for starch
A little starch powder is shaken in a test tube with some cold water and then boiled to
make a clear solution.
Add a few drops of iodine solution

Iodine solution turns blueblack if starch is present
Test for reducing sugar

Add Benedict’s solution to about 5cm3 of food solution and heat gently in a water bath.
The Benedict’s solution changes from green/orange to red/brown/brick red precipitate
Test for proteins

Add 5cm3 of sodium hydroxide to the food sample
Care; sodium hydroxide is caustic, do not allow it on the skin
Add 5cm3 of 1% copper sulphate solution.
A purple colour indicates the presence of proteins
Test for fats

Place about 5cm3 of food solution in a test tube.
Add 5cm3 of ethanol and shake thoroughly until the fat dissolves
Add 5cm3 of water
A cloud white emulsion forms if fat is present

RESPIRATORY SYSTEM
GASEOUS EXCHANGE
Gaseous exchange in the alveoli
The alveoli are respiratory surfaces where gaseous exchange take place
Air in alveoli has more oxygen than the surrounding blood capillaries therefore oxygen
diffuses into the blood capillaries.
There is more carbon dioxide proportion in the blood than in the alveoli therefore carbon
dioxide diffuses from blood into the alveoli.
Adaptations of the alveoli for gaseous exchange

1. Globular/pocket/saclike in shape to provide a large surface area for gaseous exchange.
2. Moist epithelial surfaces to dissolve carbon dioxide and oxygen for easy diffusion.
3. Thin walled epithelial (one cell thick) to allow gases to diffuse easily into capillaries.
4. Extensive network of blood capillaries to carry away oxygen and to bring carbon dioxide
to increase concentration gradient and facilitate diffusion.
5. Numerous alveoli to increase surface area to maximise diffusion.
INHALED AND EXHALED AIR

Difference between inhaled and exhaled air

Inhaled air has more oxygen (21%) than exhaled air (16%) since oxygen is used during
respiration.
Inhaled air has less carbon dioxide (0.03%) than exhaled air (4%) since carbon dioxide is
produced in the process of respiration.
Inhaled air has variable moisture while exhaled air is saturated since water is produced
during respiration.
Inhaled air is cool while exhaled air is warm since heat energy is also produced during
respiration
Experiment to show the change in proportion of carbon dioxide in inhaled and exhaled air
Half fill two test tubes with lime water or bicarbonate indicator and connect with tubing
or straw.
Breathe in and out through the mouth piece, blocking the outlet tube when breathing in
and blocking the inlet tube when breathing out, allowing inspired air to pass through the
limewater or bicarbonate indicator tube in B.
Air bubbles are seen A when you breathe in and in B when breathing out.
Lime water in B turns milky or bicarbonate indicator in B turns yellow, while in A it
remained clear.
Therefore there is much more carbon dioxide in exhaled air.
Experiment to show the change in proportion of oxygen in inhaled and exhaled air
Place a candle inside a container with inhaled and exhaled air and measure the water
displacement.
Water displacement in inhaled air is greater and the candle burns for a longer time than in
exhaled air. This is because inhaled air contains more oxygen and less carbon dioxide

when compared to exhaled air which contains less oxygen and more carbon dioxide.
RESPIRATION
Aerobic respiration
Involves the use of oxygen in the breakdown of carbohydrates or fats which are
eventually oxidized completely to carbon dioxide, water and energy
glucose + oxygen → carbon dioxide + water +

energy
During respiration the energy is transferred to the special energy carrier molecules,
Adenosine Trios phosphate (ATP). The ATP spontaneously release energy when it is
required in the cell.
Anaerobic respiration
Is the breakdown of carbohydrates to release energy without the use of oxygen
Glucose is broken down incompletely and only some (less) of the energy is released.
The intermedial compounds such as lactic acid or alcohol are produced.
glucose → lactic acid + little energy
glucose → carbon dioxide + alcohol +
energy
Experiments to show release of energy from germinating seeds

Soak the seeds overnight so as to soften the coat and boil half of the soaked seeds for
15minutes

Rinse them in a mild disinfectant e.g. sodium hydrochlorite to prevent the seeds from
rotting as a result of bacterial of fungal activity.
Place each set of seeds in thermos flasks and insert a thermometer. Plug cotton wool and
clearly label A and B. Flasks are insulated with a cotton lagging to prevent heat loss by
conduction
Flasks are inverted so that the bulb of each thermometer is surrounded by seeds allowing
the reading of the thermometers to be taken more easily.
Record the temperature of each flask and leave for a week. Record the temperature daily
Temperature rise was high in A than B

Rise in temperature in flask A is caused by heat produced by respiring germinating seeds
while in B seeds did not germinate hence no heat was produced because boiling killed
the seeds
Experiments to show release of carbon dioxide from animals

Set up apparatus as shown in the diagram. Using rubber tubing at joints allow flexibility
Describe observations after 30 minutes

NaOH or KOH was used for absorption of carbon dioxide in the incoming air.
Limewater in test tube B is for testing the incoming air to confirm that it is free from
carbon dioxide by remaining clear.
Air without carbon dioxide enters the bell jar with the animal.
Limewater in B remained clear and that of D turned milky. This is because of high
carbon dioxide concentration in the air exhaled by respiring animal
Experiments to show release of carbon dioxide from germinating seeds

Soak seeds overnight so as to soften the coats.
Boil half of the soaked seeds for 15 minutes to kill them.
Wash both sets of seeds in a disinfectant and put them into each of the two net bag
Add equal volume of limewater or bicarbonate indicator into each of the jars.
Hang the nets filled with dead seeds and germinating seeds in the jam jars using strings.
Close the jars tightly using lids and leave the jars for about 24 hours

Lime water in A turns milky while in B it remained clear.
This is because as seeds germinate, they respire releasing carbon dioxide. Boiled seeds
were killed hence did not respire and no carbon dioxide produced
TRANSPORT SYSTEM
TRANSPORT IN PLANTS
TRANSPIRATION
Transpiration is the process by which plants lose water as vapour into the atmosphere.
Turgor pressure in mesophyll cells force outwards through the cell walls. From the outer
surface of the cell walls, the water evaporates into the air spaces and diffuses out of the
stomata into the atmosphere.

Factors affecting the rate of transpiration
Temperature High temperature provides latent heat of evaporation and therefore
encourages evaporation of water from the mesophyll cells thus
increasing the rate of transpiration.
Relative humidity The lower the relative humidity of the surrounding atmosphere the
greater the saturation deficit and the faster the water vapour escapes
through the stomata. When humidity is high transpiration will be high
.
Air movement Air movement blows away saturated water vapour from leaf surfaces
and so increases the rate of evapotranspiration.
Light intensity If light intensity is increased the rate of evaporation from a plant
increases. Light causes stomata to open thereby increasing water loss
from the plant.
Surface area Large surface area of leaves allow evaporation of more water vapour
thus causing high transpiration.
Number of stomata The more the stomata present the higher the rate of transpiration. More
stomata are found on the lower surface of leaves, away from sunlight
and wind.
Measuring transpiration in a plant

The Potometer

It is an instrument used to measure the rate of water uptake by a plant or rate of water
loss by a plant.
As the plant leaves transpire, the plant uses water from the Potometer. The air bubble in
the water moves along the capillary tube, showing the amount of water the plant uses.
The water level in the beaker drops as a result.
The tap below the reservoir is opened to add water to the glass capillary so that air
bubble can be pushed back to its starting point.
Precautions taken include;

• Make sure that the stem fits tightly into the rubber tubing. Seal with
Vaseline.
• The shoot must be cut under water and inserted under water to avoid any air
bubbles that can block the xylem preventing further water uptake. 
Leaves must be dry
To investigate factors influencing the rate of transpiration, a Potometer is placed under

is placed under different atmospheric conditions such as placing it in a humid
atmosphere, warm or sunny spots or wind (in front of a fan).
The speed that the bubble moves with along the capillary tube under these different
atmospheric conditions will indicate the rate of transpiration.
Importance of transpiration
Cooling the plant

Uptake of water
Uptake of salts
Adaptations of plant leaves to reduce transpiration

Leaf surfaces may have sunken stomata covered with hairs. The hairs slow down air
movement and trap water vapour. This decrease concentration gradient hence slowing
rate of transpiration.
May have thick cuticle making the leaf more waterproof

Reduced leaf size in some plant species to reduce transpiration. Smaller leaves have a
smaller surface area than large leaves. The smaller leaves will lose less water.
Some grass curl up (fold/roll) their leaves inwards to reduce the surface area exposed to
air and water vapour
Fewer stomata per unit surface area will result in less water being lost by the leaf.
More stomata are found on the lower surface of leaves to prevent them from being
exposed to the sun and wind to reduce transpiration rate.
Experiment to demonstrate the distribution of stomata in water loss
Take four similar leaves from a plant and label them as follows
• W – put Vaseline on both surfaces of the leaf
• X – put Vaseline on the lower leaf surface only
• Y – put Vaseline on the upper leaf surface only
• Z – no Vaseline
Tie the leaves with threads and hang them on a retort stand in the sun for about 6 hours
and observe the leaves.

• W loses almost no water
• X loses only little water
• Y loses much water
• Z dries out
This experiment shows that the lower surface of leaf loses much more water vapour than
the upper side because there are more stomata on lower surface.
The top is covered by a waxy cuticle that reduces water loss. Water is lost from plants
through the stomata
TURGITY AND PLASMOLYSIS

Turgidity
Is when a cell is fully expanded due to the absorption of water.
When a plant has enough water available water enters the cell forcing the vacuole to
expand.
The vacuole pushes the cytoplasm against the cell wall causing the cell to become turgid
(stiff) thus builds up an internal pressure called Turgor pressure.
Turgid cells are firm and support the plant to maintain its shape, resilient and strength
Plasmolysis

Is the shrinking of protoplasm away from the cell wall of a plant due to loss of water by
osmosis. In so doing leading to the cell membrane pull away from the cell wall
When a plant cell is immersed into highly concentrated solution, water diffuses out of the
cell, and Turgor pressure of the cell is lost. The cell becomes flaccid and the cell
membrane is pulled away from the cell wall. Additional loss of water will lead to
Plasmolysis, and finally the cell wall totally collapses.
Further water loss results in wilting of the plant
Experiment to demonstrate Plasmolysis and turgidity using potato strips

Use potato strips obtained from a fresh potato, of same diameter and length.
Add one piece of potato strips to each solution i.e. distilled water and 10% salt solution.
Strip in distilled water increased in length and diameter while that one in sugar solution
decreased.
Strip in distilled gained water by osmosis and become turgid.

Strip in salt solution lose water by osmosis and become flaccid.
Experiment to demonstrate Plasmolysis and turgidity using visking tubing

TRANSPORT IN HUMANS
BLOOD CIRCULATION
The double circulatory system
Blood flows through the heart twice. Blood flows from the heart through a continuous
system of blood vessels to different parts of the body and then returns to the heart and
proceeds to the lungs.
The circulatory system consists of pulmonary and systemic circulation systems.

• Pulmonary circulation carries deoxygenated blood to lungs and oxygenated
blood back to the heart. When the right ventricle contracts, deoxygenated blood
is forced through the semilunar valve in the pulmonary artery towards the
lungs for oxygenation. From the lungs oxygenated blood returns to the heart
through the pulmonary veins and into the left atrium.
• Systemic circulation carries oxygenated blood to the body parts and

deoxygenated blood back to the heart. The left ventricle pumps oxygenated
blood into the aorta to all body parts. Blood returns to the heart through the

inferior and superior vena cava
Functions of blood
1. Transport i.e.
• Carbon dioxide from respiring cells to lungs
• Oxygen from lungs to cells
• Products of digestion from ileum to cells
• Excreta from all metabolizing cells to liver
• Hormones from endocrine glands to the target organs e.g. liver
• Heat from main heat producing organs (liver and muscles) to all body parts
2. Homeostasis i.e.
• Maintenance of a constant internal environment i.e. water, glucose, temperature
3. Defence i.e.
• Carry white blood cells to site of infection to destroy pathogens
• Carry platelets to site of infection for blood clotting to stop infection.
Blood vessels
Artery
The function of the artery is to carry oxygenated blood away from the heart.
Arteries have thick tough wall with muscles, elastic fibres and fibrous tissue. This prevents
bursting since they carry at high pressure and help maintains pressure wave. Elastic fibres allow
them to withstand the surges of high pressure caused by heart beat.
The lumen is quite narrow. This helps to maintain blood pressure

Valves are absent. High pressure prevents backflow of blood

Vein
The function of the vein is to carry deoxygenated blood to the heart.
Veins are thin walled – mainly fibrous tissue, with little muscle or elastic fibre. This is
because they carry blood at low pressure.
They have large lumens to reduce resistance to blood flow

Valves are present to prevent backflow of blood. Contraction of body muscles
compresses the veins assisting the return of oxygenated blood to the heart.
Capillary
Capillaries allow oxygen and food molecules to diffuse into cells and wastes out of the
cell.
Capillaries have permeable walls which are one cell thick, with no muscle or elastic
tissue to allow diffusion of materials between capillary and surrounding tissues.
The lumen is very small to allow blood cells to squeeze through. Blood cells pass
through slowly to allow diffusion of materials and tissue fluid.
Valves are absent as blood is still under pressure though the pressure is lower than in
arteries.

REPRODUCTIVE SYSTEMS
REPRODUCTION IN PLANTS
Reproduction in Plants
Reproduction is a characteristic of all living organisms. It is the process by which organisms
make more of their kind. There are two types of reproduction,
1. Asexual reproduction and
2. Sexual reproduction.
Sexual Reproduction
Sexual reproduction is the process involving the fusion of male sex cells and female sex cells
to produce a new offspring.
The structure of a flower

1 Stigma • Receives pollen grains during the process of
pollination
• Produces a sticky substance to ensure pollen grains
get stuck
2 Style • Supports the stigma
• Provides pathway for pollen tube to the ovules
3 Ovary • Produces ovules
• Later develops into fruit after fertilisation
4 Ovule • Are the female sex cells
• Develops into a seed after the process of fertilisation
5 Petals • Attract insects for pollination by their bright colour
and nice scent
• Their shape promotes pollination as they direct
insects towards the nectaries
6 Sepals ⮚ Protects the flower bud
7 Anther ⮚ Produces pollen grains
8 Pollen grains ⮚ These are the male sex cells

In a plant, the organs which are responsible for sexual reproduction are the flowers. The
diagram below shows a typical flower.
Structure of a flower Diagram
Sex cells are called gametes. The male gametes are produced by the anthers and are inside
the pollen grains. The female gametes are produced by the ovary and are inside the ovules.
Some flowers can produce both male and female gametes. They are called hermaphrodite.
Pollination:
Pollination is the transfer of pollen grains from the anthers of a flower to the stigma of a
flower.
Methods of Pollination
There are two methods of pollination,

1. insect pollination and
2. wind pollination.
Some flowers pollinate by insects while others pollinate by wind and wind and insects can
also be called the agents of pollination.
Insect pollination
Insect pollinating flowers have special attractive features like brightly colored petals,
attractive scents and sugary nectar. These features’ aim is to attract insects like bees to come
and collect their nectar. While an insect is collecting the nectar, its body will touch the
anthers. The pollen grains of insect pollinating flowers have hooks and spikes all over them
in order to stick to the bodies of the insect that touch it. When this happens, the pollen grain
sticks to the body of the insect. When the insect moves on to another flower to collect its
nectar, the pollen grain falls off the insect onto the stigma of the flower, thus insect
pollination took place.
Wind Pollination
Wind pollinating flowers however look very different from insect pollinating ones. This is
because they do not need attractive features such as bright colors and scents and nectar to
attract insects. Instead, their petals are green or brown with their anthers and stigmas hanging
outside the flower to be exposed to the wind. When wind is strong enough, it will blow the
pollen grains off the anther and carry it along. At some point the wind will get weaker and
the pollen grain will land, if it lands on the stigma of a flower of the same species then the
pollination was successful. The surface of pollen grains of wind pollinated plants is smooth
because it does not need spikes to catch on insects.
Comparing wind pollinated and insect pollinated flowers

Insect pollinated Flowers Wind Pollinated Flowers

Petals Petals are bright and Dull coloured, usually green or
produce a nice scent to brown and produce no scent as there
attract insects is no need to attract insects
Size of Produce large sticky pollen Produce small smooth pollen grains
pollen grains which are light enough to be carried
grains by the wind
Quantity of Relatively small number of Produces a large quantity of pollen
pollen pollen grains as chances of grains to increase the chances of
grains pollination are high pollination
produced
Position of Inside the flower Are hanging outside the flower

stigma and
anthers
Nectaries They have nectarines No need for nectaries
which produce nectar to
attract insects
Types of Pollination
There are two type of pollination
1. Self Pollination and
2. Cross Pollination:
Self pollination The transfer of a pollen grain from the anther to the stigma of the same
flower or the stigma of a flower of the same plant.
Advantages of self pollination
1. Good characteristics can be maintained in the offspring because there is no variation.
2. Chances of success for self pollination are much greater especially were plant population
is small.
Cross Pollination The transfer of a pollen grain from the anthers of one plant to the stigma
of a flower on another plant of the same species.
Self pollination is considered sexual reproduction because it involves the fusion of two
gametes together even though they might come from the same flower or plant.
Why cross pollination is considered desirable
1. It causes variation in plants which allows plants to adapt to changing environments. This
prevents the extinction of plant species.

2. It allows the breeding of better varieties by combining plants with desired characteristics.
How are plants adapted to promote cross pollination

1. Unisex plants – some plants have female plants and male plants and no plant can
pollinate itself e.g. paw paw plant
2. Stigmas and anthers of plants in certain plants mature at different times. The stigma
matures earlier than the anthers and can only receive pollen from another plant.
3. Anthers which are lower than stigmas. This ensures that insects touch the stigma on their
way in with pollen from another plant. On their way out, they crawl out using the petals
carrying pollen from this flower to another plant.
4. Self sterilisation – some plants produce chemicals on the stigma which do not allow
pollen from the same plant to develop.
Disadvantages of Cross pollination

Refer to advantages of self pollination.
Fertilization
⮚ This is the fusion of the male and female sex cells to produce a zygote. It occurs after a
pollen grain has landed on the stigma of a flower of the same species.
⮚ The stigma produces chemicals that cause the pollen grain to develop a pollen tube.
⮚ The pollen tube then grows down the style until it reaches the ovule in the ovary.
⮚ The nucleus of a pollen grain moves down the tube until it gets inside the ovule where it
fuses with the nucleus the ovule.
⮚ The fusion produces a zygote which develops first into an embryo and latter the whole
ovule develops into a seed.
Diagram

Results of fertilization
1. The fused nuclei develop into a zygote further develops into an embryo (made up of the
plumule and the radical). This develops into a new plant during germination.
2. The ovule becomes the seed.
3. The ovary develops into a fruit.
STRUCTURE OF SEEDS
Maize (monocotyledon) Bean (dicotyledon)
One cotyledon

Endosperm as food store
Two cotyledons
Has pericap
Cotyledon as food store
Has testa
Functions of parts of seeds

• Testa – tough, hard coat which protect the seeds from fungi, bacteria and insects.
• Radicle – is the embryonic root which grows and develops into the root system of the
plant.
• Plumule – is the leafy part of the embryonic shoot which grows and develops into the
leafy system of the plant.
• Endosperm – food store

• Cotyledon – food store
• Micropyle – is a tiny pore in the testa that allows water to the embryo before germination
.
GERMINATION
Germination is the process by which an embryo starts to grow to form a seedling
Germination starts when a seed absorbs water through the micropyle which causes the
seed to swell and the seed coat (testa) breaks.
Enzymes are activated and the process of respiration begins. Enzymes start to break
down the food store in endosperm or cotyledon. Once the food source becomes soluble it
diffuses into the seed embryo which starts to grow into a seedling.
In some dicotyledonous plants, the cotyledons are brought out of the testa and above the
ground, where they become green and make food by photosynthesis during early stages
of germination (epigeal germination).
In monocotyledonous plants the cotyledon remains below the ground (hypogeal

germination)
Conditions necessary for germination

Water/ moisture Water is necessary for chemical reactions to occur. It acts as the medium
for dissolving food substance so that enzymes can digest the food.

Suitable temperature of about– germination occurs more rapidly at high temperature
from20oC up to about 40oC which is the optimum temperature for enzyme activity. This
speeds up biological reactions and growth and development of the embryo. Low
temperature slow down enzyme activity while high temperatures denature enzymes
Oxygen is used in aerobic respiration, which provide energy for the chemical change
involved in mobilising the food reserves and making the new cytoplasm and cell walls of
the growing seedling
Experiments on conditions necessary for germination

Set up four test tubes A, B, C and D as shown in the diagram. All containers had same
number of seeds soaked placed in damp cotton wool and left at different conditions for a
few days.
In B, there is no water resulting in no germination. Moisture was absorbed by the

calcium hydroxide granules.
In C, Alkaline pyrogallol absorb oxygen from air therefore no germination in C due to
absence of oxygen.
In A seeds will germinate because all conditions needed are available

No germination in D because the temperature was not favorable for enzyme activity to
occur.
Germination Success
This refers to how well a sample of seeds germinates when all the necessary conditions
are present

Some seeds fail to germinate due to lack of the necessary conditions for germination or
due to dormancy.
Germination success is calculated from the results of a germination experiment and is

presented as a percentage
Example Chipo planted 40 bean seeds. If the percentage germination was 20%, how
many seeds germinated?
Example
If the percentage germination when Chipo planted X seeds was 30% and
this was equivalent to 12 seeds germinated. Find the value of X
Example If 200 seeds of pumpkins were sown and 184 germinated. Calculate the %
germination
VEGETATIVE/ASEXUAL REPRODUCTION
Asexual reproduction is the production of new individual plants from vegetative
structures without the use of seeds
Many plants are capable of producing new separate plants from their existing non seed
parts such as stems, roots and leaves
Methods of asexual reproduction in plants

Rhizomes e.g. grass
Main part of the stem remains below the ground and grow horizontally. Some of the
terminal buds may produce an erect stem that emerges above the ground. These
manufacture food which is stored in the part below
New shoots develop from lateral buds

Tubers e.g. Irish potato
Are short, thick underground stems or roots of plants
These frequently bear buds from which new identical plants may grow using food stored
in the tuber
Stem tubers have tiny scale leaves and lateral buds. A root tuber is a lateral root that has
been modified to function as a storage organ.
Cuttings e.g. sugar cane, cassava, sweet potato

These are portions of stems, roots or leaves that are removed and planted in sand, loose
soil or even in water. Roots grow from the base of the stem into the soil while the shoot
continues to grow and produce leaves.
Advantages of asexual reproduction

No gametes are needed
Plants can grow quickly
Plants have more chances of survival since food is readily available
New plants established over large areas very rapidly

All plants obtained are exactly the same as the parent, hence the favorable/desirable
characteristics are retained
Disadvantages of asexual reproduction

Plants are crowded and usually compete for light, water and nutrients
There is no genetic variation, so adaptation to a changing environment is unlikely.
All plants are identical and may be viable to attack by same pests and diseases
Differences between sexual and asexual reproduction in plants

Sexual reproduction involves the fusion of specialized sex cells (gametes) derived from
two different individuals. There is variation occur in offspring
Asexual reproduction involves one organism where a part or parts of the existing parent
produce genetically identical new independent organisms. There is no variation. No
gametes are involved and all the new plants are produced by cell division from only one
parent.
REPRODUCTION IN HUMANS
REPRODUCTIVE SYSTEMS
Male reproductive system
Testes make and produce sperm cells. Produce the hormone testosterone which
causes secondary sexual characteristics in males.
Scrotum it is a sac that contains testes lies outside the abdomen to regulate their
temperature, aiding optimal sperm production. The scrotum can contract or
loosen to the testes closer or further from the body
Epididymis temporary storage of sperms until they reach maturity. It is a coiled tube lined
with a mucous membrane. Once mature the mucous membrane secretes a
substance to help the sperm cell to move.
Sperm duct/vas deferens carries the inactive sperm from the epididymis
Prostate gland, Cowper’s gland and seminal vesicle add a secretion to sperms during
ejaculation which activates the sperm. They are a source of nourishment for the
sperm and a medium in which the sperm can move. Secrete alkaline fluids to
help neutralise any acidity and the sperm to move faster. Mucus secreted help
to lubricate the penis during ejaculation
Urethra serves as a duct for passage of semen through the penis to the outside
Penis consist of erectile and connective tissue with numerous blood vessels. During

sexual excitation, it becomes engorged with blood, stiffens and become erect.
Female reproductive system

Ovaries produce female sex cells. They also produce the female hormones
(progesterone and oestrogen). Progesterone controls the development of ova and
thickening of uterus lining in preparation for pregnancy. Oestrogen causes
female secondary sexual characteristics and is involved in the menstrual cycle.
Oviduct is lined with projections that help to move the egg cell from ovary to the
uterus. This is also where fertilisation takes place.
Uterus It has very thick muscular walls. The fertilised ovum implants itself in the
uterine walls to develop into an embryo. Produce sex cells and hormones and
also house the developing embryo after fertilisation and supply the embryo
with nutrients while it develops.
Cervix is a narrow ring of muscle that closes the uterus but can expand greatly
during birth of a baby. It contains glands that supply the vagina with mucus.
Vagina is a muscular organ which opens to the outside of the body. This is where
sperms are deposited during copulation. It acts as the birth canal during birth.
It is richly supplied with mucus for lubrication

Structure and functions of sex cells
Sperm Ovum
surrounded by one membrane

Surrounded by two membranes
Very small in size
Larger than the sperm
(microscopic) Has to be moved
Move on its own More cytoplasm containing food
Smaller or lesser cytoplasm reserves
No nutrient store Food store present
More mitochondria to provide Fewer mitochondria
energy to move (swim) No acrosome
Acrosome present which Oval/round in shape
contains enzymes that breaks
down the membrane of the ova
Elongated in shape

The head of the sperm contains a nucleus that contains half the genetic material of the
male and the nucleus of the ova contains half the genetic material of the female, which
will fuse with the nucleus of the sperm.
Many sperm cells are produced
THE MENSTRUAL CYCLE
This is a cycle which involves changes in the uterine walls, controlled by a number of
hormones. Each cycle takes about 28 days on average

It starts with menstruation which is the breakdown of the endometrium (uterus lining)
due to a drop in the level of progesterone, and the cells and blood making the lining is
shed via the vagina. It lasts for 45 days.
From day 6, under the influence of oestrogen from ovaries, the uterus lining (
endometrium) starts to build again, developing a mass of blood vessels so that it is
ready to receive a fertilised ovum.
The follicle stimulating hormone (FSH) causes a follicle in one of the ovaries to
mature into an ovum.
On day 14 (mid cycle), the level of oestrogen drops and stops the production of FSH,
so that only one egg is released at a time and stimulates the release of luteinizing
hormone (LH), stimulating ovulation. Body temperature increases from day 14 – 28.
The corpus luteum (remains of the follicle) starts to secrete the hormone progesterone
that stimulates the tissue of the endometrium to thicken and prepare for possible
implantation of fertilised ovum. The release of FSH and LH is stopped.
In the absence of fertilisation, the corpus luteum degenerates resulting in a drop in

secretion of progesterone and the endometrium breaks down again, restarting the
cycle again.
FERTILISATION, PREGNANCY AND DEVELOPMENT
Fertilisation
Fertilisation is the fusion of male and female sex nuclei to form a zygote
The sperm swim through the cervix and into the uterus by wriggling movements of
their tails. They pass through the uterus and enter the oviduct.

If there is an ovum in the oviduct, the sperms stick to its surface. The acrosome at the
head of the sperm secretes enzymes which digest part of the egg membrane.
The sperm enters the cytoplasm of the ovum and the male nucleus of the sperm fuses
with the female nucleus to form a zygote.
A chemical change occurs at the membrane surface immediately after penetration.

The zygote starts to divide into a ball of cells (blastula) and continues to move
towards the uterus where it embeds itself to the spongy tissue of the endometrium (
implantation) that lines the uterus forming the placenta marking the beginning of
pregnancy.
Pregnancy and development

The zygote divides to produce a ball of cells (blastula) which travels to the uterus
where it sinks into the uterus lining (implantation).
The embryo continues to grow and produce new cells that form tissues and organs.
After 8 weeks when most organs are formed the embryo is called a fetus.
As the embryo grows, the uterus enlarges to contain it. Inside the uterus the embryo
is enclosed in an amnion which protects it from damage and prevents unequal
pressures from acting on it.
The oxygen and food needed to keep the embryo alive and growing are obtained
from the mother’s blood by means of a structure called the placenta
The placenta

Soon after the ball of cells reaches the uterus, some of the cells, instead of forming
the organs of the embryo, grow into a disclike structure called the placenta.
The placenta is a barrier that separates mothers’ blood system from the fetal system
preventing agglutination of maternal and fetal blood.
It allows for exchange of substances between mother and foetus i.e.

1. To the foetus – water, nutrients (food), antibodies (to help foetus to develop its
immune system and oxygen
2. From the foetus – urea and carbon dioxide (waste products)

The placenta is connected to the embryo by the umbilical cord which contains
umbilical veins and artery.
The placenta filters many harmful substances but some viruses, smoke and alcohol
are not filtered and can pose a health risk to the foetus.
It also secrete hormones e.g. oestrogen and progesterone which stops menstrual cycle
.
CONTRACEPTION METHODS
Natural methods Abstinence

This involves a couple avoiding sexual intercourse. In this way, sperms cannot come
into contact with the egg and fertilisation cannot happen. Advantages
100% effective
No physical side effects
Rhythm
Abstain from sexual intercourse during unsafe periods i.e. days 1117. The
woman’s body temperature is monitored. When ovum occurs it is indicated by the a rise
in the temperature
Advantages
No side effects
No chemicals or barriers used Disadvantages
Not reliable since periods maybe irregular

Imposes restrictions to sexual activity
Sexual frustrations
Barrier methods Condoms
Is a strong latex rubber sheath is placed over an erect penis or inserted into the
vagina before sexual intercourse. During ejaculation the condom traps sperms and
prevent them from reaching the uterus. Advantages
Protects against STIs Disadvantages
Can break
Slightly decrease sensation for males
Interruption of foreplay to fit
Diaphragm
Is a dome shaped rubber device placed in the vagina to mechanically block
entry of sperms into the cervix. Can be used with spermicides that kill sperms.
Advantages
Can be inserted a few hours before intercourse

May be reused for up to two years Disadvantages
Must be prescribed and fitted by a physician

Must be inserted prior to coitus and left in left in place for several hours after
intercourse
Not suitable after three or more natural deliveries
IntraUterine Device
Is a small plastic and copper device, inserted into the uterus to prevent
implantation of the embryo in the uterus lining. It prevents implantation by stimulating
inflammatory response. Advantages
Provides continuous protection

Highly effective
Can last for 5 years
Does not interfere with love making
Suitable for older women
Disadvantages
Lead to cramps and pain
Pelvic infection

Increased menstrual flow
Coil may come out
Must be inserted by a specialists
Chemical method
Spermicides (foams, jellies, creams)
Jelly placed into vagina before sexual intercourse and it chemically kills the
sperms Advantages
No known side effects

Easy to use
Improves effectiveness of condoms/diaphragm Disadvantages
Not reliable due to high failure rate

Best used in conjunction with diaphragm
Messy
Used with every sex act
Must be applied not more than 30minutes before sexual intercourse
Hormonal methods
Oral contraceptive pill
Contains hormones (oestrogen & progesterone) which suppresses and prevents
ovulation so preventing conception. Cervical mucus thickens and prevents entry of
sperm hence preventing fertilisation. Advantages
Highly effective
One have sexual freedom
Regular menstrual cycle
Can be taken whilst breastfeeding without affecting quantity or quality of milk
Lower dose of hormone and therefore less risk to older women.
Disadvantages
Can cause thromboembolism, hypertension and heart diseases in some users.
Monthly cycle maybe regular, with breakthrough bleeding.
Minor side effects e.g. headaches
Must be taken same time each day or more than three hours late
Injection (DepoProvera)
Progesterone into muscle for long term to slow release and stops ovulations.
Advantages
One injection protects up to 12 weeks

Convenient and private
Reversible
Does not interfere with sex
Disadvantages
Can cause irregular periods
May delay fertility when stopped

HEALTH AND DISEASES
SEXUALLY TRANSMITTED INFECTIONS (STIs)
Chancroid (veneral ulcers)
Is caused by a bacteria i.e. haemophilus ducreyi.
Signs and symptoms
Soft painful ulcers on genitals.
Ulcers that cause a painful burning sensation during urinating or bowl movements in females
Swollen glands in groin region

Abnormal vaginal discharge in females Effects
Leads to brain damage Treatment
Early treatment with antibiotics like penicillin, tetracycline and sulphonamide which
decrease scarring after the healing of the ulcers.
Gonorrhoea
Is caused by a bacterium Neisseria gonorrhorae
Infections occurs in the urethra, cervix, anal region and conjunctiva Signs and symptoms
The bacterium damages the urinogenital system including the kidneys, causing sores and
other discomforts.
It takes about 3 – 5 days for signs to appear after infection. In males signs are very clear
early during infection*******
• Males
✓ Inflammation and pain during urination
✓ Painful yellowish discharge of pus in males after urination
✓ Cloud urine due to the presence of pus in urine
✓ Enlarged glands near the groin
• Females
✓ Swelling of vulva in females
✓ Abnormal vaginal discharge
✓ Abnormal menstrual bleeding

✓ Abnormal menstrual pain or pain with sexual intercourse
Effects
If not treated in early stages gonorrhoea can;
✓ Leads to sterility through infecting the prostate gland in males and the fallopian
tube in females.
✓ Can cause severe arthritis

✓ Pelvic floor infection
✓ Infected pregnant women may give birth to babies with eye diseases which can
cause permanent blindness. Treatment
It is treated with antibiotics i.e. penicillin and tetracycline
Syphilis
Is caused by a bacteria Treponema Pallidum
Signs and symptoms
Signs and symptoms appear in about 10 to 25 days after infection.
Signs and symptoms occur in three progressive stages and each stage lead to the next.
• Stage one
✓ In both male and female, first sign of the disease is small painless lump or sore
(chancre) on or near the genital organs. The sore could heal and disappear in a
period of 3 to 8 weeks.
• Stage two
✓ Begins 6 to 8 weeks after first symptom have disappear. The bacteria move
deeper into the body.
✓ Symptoms at this stage are rash or sores on or around genitals, the anus, mouth,
eyes.
✓ Lymph glands in the neck swell up. It lasts for 2 to 6 weeks.  Stage three
✓ Visible symptoms gradually disappear. This is the most destructive stage as the
bacteria destroy nerves, heart disease sets in, blindness occurs and sometimes
the patient become insane before death. Effects
If not treated earlier, it may cause

✓ Brain damage
✓ Obstruction of arteries
✓ Heart failure
✓ Death
✓ Still birth, low birth weight or premature birth
✓ May cause paralysis, insanity, blindness or death of foetus Treatment
Treated with antibiotics e.g. penicillin during the early stages. Once the disease has reached the
third stage, it is difficult to cure as lesions may have already caused permanent damage to organs.
Genital herpes
Is caused by the herpes simplex virus (HSV) Signs, symptoms and effects
Ulcers on or around genitals. The ulcers burst into small itching sores Pain, itching and sores
in the infected area 210 days after infection.
Fever, headache and muscle ache

Swollen lymph nodes may also appear
Ulcers that may make it painful to urinate
Scabs that form as ulcers heal Treatment
It has no cure but the symptoms can be prevented with treatment using antivirals to reduce the
pain and discomfort from sores. It also suppresses the virus and reduces the risk of infecting others
.
HIV/AIDS
AIDS is caused by HIV. It is transmitted through certain body fluids.
It is spread through the following ways
• Through unprotected sexual contact with an infected partner
• Sharing of contaminated needles when administering drugs
• Use of contaminated cutting instruments
• From an infected mother to foetus across the placenta
• From an infected mother to infant through breast feeding or accidentally during birth
Effects of HIV on the body
HIV attacks the white blood cell critical to immune system known as Thelper lymphocytes.

HIV uses these cells to reproduce itself by using the lymphocyte’s DNA to make new virus DNA
thus destroying the lymphocytes.
The virus infects and destroys cells of the body’s immune system so that their numbers gradually
decrease.
When numbers are low, the body is unable to resist infection, so allowing a range of parasites to
cause a variety of different infections (opportunistic infections) and the victim eventually dies
from a combination of diseases (AIDS) Controlling the spread of HIV/AIDS
Abstinence from sexual activity

Use of sheath or condoms correctly and consistently during sexual intercourse
Having sex with only one faithful, lifelong uninfected partner
Eliminate socioeconomic disparities which force people to promiscuity
Using sterilised or disposable instruments in activities which draw blood such as circumcision,
tattooing and ear piercing
Screening of blood before transfusion

Educate the sex active age on the dangers and spread of HIV/AIDS
An infected mother avoids pregnancy so as to prevent passing of HIV on to her baby
Get tested and know your partner’s status before having sex
Treatment of HIV/AIDS
There is no cure for HIV/AIDS, it can only be controlled. The common treatment is by anti
retroviral drugs (ARVs) as HIV is retrovirus. ARVs slow down the reproduction of HIV by
interfering with its life cycle and HIV numbers are reduced.
The control methods of STIs

Abstinence
Use of condoms correctly and consistently
Contact tracing
Behaviour change
Having mutually faithful long life relationships
Early treatment with antibiotics
Regular tests for STIs
INFECTIOUS OR COMMUNICABLE DISEASES
MALARIA

Malaria is a caused by a protozoan called plasmodium falciprum found in the salivary glands of
the female anopheles mosquito. A protozoan is a single celled organism.
Signs and symptoms

High fever with a temperature of up to 41°C
Loss of appetite and Nausea
Shivering and profuse sweating
General body weakness or tiredness
Headaches
Aching joints
Vomiting
Enlarged spleen or liver
The life cycle of malaria parasite
The parasite relies on humans and mosquitoes to carry out its life cycle.

The infected mosquito bites a human, releasing the plasmodium from its salivary
glands into the human host’s blood. The parasite rapidly goes to the liver where it
reproduces rapidly and after about 2 to 3 weeks, the protozoa escapes into the blood
stream.
The parasites enter the red blood cells and multiplication continues. The infected red
blood cells raptures (breaks) releasing more parasites into the blood stream where they
seek out and inject new red blood cells.
As red blood cells break toxins are released into the blood resulting in fever, chills and
a depletion of oxygen in the body. While the parasite is growing in red blood cells the
person feels weak.
Released parasites may be picked up by the anopheles mosquito and enters the
stomach of the mosquito. Inside the mosquito the parasite reproduce sexually and grow
to develop into the infective stage in numerous complicated developmental stages.
The infective stage migrates to the salivary glands of the mosquito and these may later
be injected into another person when the mosquito bites a healthy person.
Treatment
Use of antimalarial drugs such as chloroquine, quinine, coartemether and Fansidar
which kills the parasite in the human body.
Methods of controlling malaria

Use of prophylactic drugs like Deltaprim, Malasone and malaquine before visiting malaria zone.
This help to prevent contraction of malaria
Use of anti malarial drugs e.g. Chloroquine, Coartemether etc

Use of insecticides to prevent mosquito from becoming an effective carrier e.g. DDT
Avoid mosquito bites by wearing thick long sleeved shirts and trousers at night
Destruction of mosquito larvae and pupa (breaking life cycle) by appropriate methods
e.g. biological control of larva by using bacteria and fish which feed on mosquito larvae
Destroy breeding sites of mosquito by clearing stagnant waters and keeping grass short.
CHOLERA

Cholera is an intestinal disease caused by a bacterium called vibrio cholarae. The pathogen is
transmitted through eating contaminated food or drinking contaminated water.
Signs and symptoms

Severe diarrhoea (rice watery stools)
Abdominal pains
Fever
Vomiting
Dehydration leading to sunken eyes and pale skin.
The body becomes weak and eventually causes death.
Treatment
Use of antibiotics such as tetracycline and chloramophenical
Oral rehydration therapy to replace lost fluids and salts
Control
Good food and personal hygiene
Proper sanitation
Vaccination
Drinking clean safe water
EBOLA
Is spread by the deadly Ebola virus that is spread through close contact with blood or body fluids,
secretions and organs of animals such as chimpanzee, gorillas and bats that are infected.
Incubation period is 2 – 21 days
Signs and symptoms

First signs include
✓ High fever
✓ Joint and muscle pain
✓ Fatigue
✓ headache
It is followed by; ✓ Vomiting
✓ Diarrhoea

✓ Rash
✓ Liver and kidney problem
This can be followed by external and internal bleeding of gums, nostrils and bloodstained
feaces. This may eventually progress to organ failure and death.
Treatment
Is limited to intensive supportive therapy and often includes
1. Balancing patient’s fluids and electrolytes
2. Maintaining their oxygen levels and blood pressure
3. Treating complicating infections early
Control
Avoid eating wild meat
Avoid direct contact with infected people and animals
Practice good hygiene
Isolate patients with Ebola
Notify health officials if you have direct contact with blood or body fluids
Restricting international travel
Improving public sanitation, health care and health education
TYPHOID
Is caused by a bacteria salmonella typhosus. It is common in places where there is poor sanitation
and little access to clean water.
The bacterium lives in the intestines and therefore is spread by contact with the feaces of an
infected person. The bacteria can pass into water bodies through seepage, burst sewer pipes or
sewage introduced directly into water bodies.
Contaminated food is another way of transmitting the disease.
Signs and symptoms

High fever
Muscular pains
Weakness
Stomach ulcers

Headaches
Diarrhoea
Poor appetite
A rash may appear, as well as a white coating inside the mouth.
Treatment
Use of antibiotics such as ciprofloxacin and ceftriaxone which kill salmonella bacteria.
Rehydrate by drinking adequate water
Control
Practice good hygiene (thorough cooking of food)
Drink clean safe water
Vaccination
Proper sanitation
Avoid travelling to places with high risk of typhoid.
Avoid eating raw fruits and vegetables that cannot be peeled.
SUBSTANCE ABUSE
Effects of tobacco smoking on health
Tar destroys cilia leading to lung cancer
It can cause emphysema i.e. the buildup fluids in lung tissue
It cause bronchitis where bronchioles become irritated and inflated
It can cause Coronary Heart Diseases (CHDs) leading to heart attack
It can cause low birth weight in babies of smoking mothers
Addiction caused by nicotine
Effects of excessive consumption of alcohol
It is a depressant to the central nervous system leading to reduced self control
Causes liver cirrhosis
Slows reaction time e.g. during driving and operating of machinery
Alcoholism or addiction to alcohol
Can lead to antisocial behavior due to poor decision making
Can cause brain damage
Effects of breathing solvents e.g. glue, ethanol, benzene

Hallucinations
Reduced self control
Damages nasal passages
Damages muscles and heart
Slows reaction times
High doses can leads to unconsciousness, vomiting and brain damage
Can cause drowsiness, headaches, nausea Effects of mandrax and cannabis
Alters personal behavior

Loss of self control or maniac behavior
Slows reaction times
Hallucinations
Low doses leads to Euphoria
Relaxed and uncaring attitudes
Overdoses are fatal
Addiction
Increased chances of unsafe sex and contracting STIs
Increased criminal tendencies
Insomnia, low blood pressure, seizures, depressions and reduced memory.
IMMUNITY
Immunity is the body’s ability to resist attack by antigens or pathogens or infection which
may lead to infectious disease.
Active immunity
Active immunity is a form of acquired immunity in which the body produces its own
antibodies against disease causing organisms.
It is defined as resistance that the body offers due to production of antibodies as a result of a
secondary attack.
The body actively produces antibodies against the antigen and this gives long term immunity.
Active immunity may be;

• Natural active immunity – This occurs following attack of the disease e.g.
whooping cough. During an infection the body produces specific antibodies

against the pathogens or their products. Antibodies attach themselves to and
immobilize the bacteria thus making it ready for ingestion by phagocytes.
Once antibodies have been produced in large amounts they remain in the body
and give protection against similar attack.
• Artificial active immunity – This which occurs following vaccination e.g.

small pox vaccination or BCG injection against TB. A vaccine may be
administered either through a suspension of immobilized or attenuated
organisms whose strength has been reduced. When the body is injected with
such vaccines, it reacts by producing antibodies which remains in the blood
stream protecting the body from virulent organisms thus making the body
immune to disease
Passive immunity
Is defined as resistance acquired when readymade antibodies are transferred to an individual.
Passive immunity may be;

• Natural passive immunity – This is acquired naturally in an unborn infant
through the transfer of antibodies from the mother’s blood via the placenta.
Other antibodies may be transferred to the baby from the mother’s breast milk
• Artificial passive immunity – This is acquired by artificially transferring
antibodies that have been produced in other individuals or animals into an
individual. The serum provides immediate protection against an infection though
protection is temporary.
How infants acquire immunity

Breast feeding
Antibody transfer via the placenta
Immunization
Immunization Schedule
Immunisation is a process of administering a vaccine to the body so that it can produce
immunity against a specific disease
Babies are generally immunised against six killer diseases i.e. measles, diphtheria, whooping
cough, tetanus, polio & tuberculosis. This helps to prevent them from spreading in the

community.
Vaccinations are given at specific ages e.g. 6 weeks. Each time a vaccination is given, it has a
higher dose so that the body can build up enough antibodies
Normally in Zimbabwe the immunisation of infants and children include;

First dose of Vitamin A supplementation is given at 6 months and thereafter a dose every 6
months up to 5 years of age.
• BCG – at birth
• 3 months – DPT1 Polio1
• 9 months – Measles
• 18 months – DPT and Polio (booster)

Bio Notes-1

Uploaded by

Copyright:

Available Formats

Bio Notes-1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bio Notes-1

Uploaded by

Copyright:

Available Formats

BIOLOGY

COMBINED SCIENCE NOTES

COMPILED BY T. MUSARA pg. 1

 HEALTH AND DISEASE

COMPILED BY T. MUSARA pg. 2

Red blood cell (erythrocytes)

­ Lacks a nucleus to increases surface area for absorption of oxygen.

­ It is responsible for contraction when stimulated by a nerve so that movement occurs.

COMPILED BY T. MUSARA pg. 3

­ Its function is to make food by photosynthesis.

Root hair cell

­ Responsible for absorption of water and salts from the soil.

­ Large vacuole facilitates water absorption and storage.

COMPILED BY T. MUSARA pg. 4

­ An ecosystem consists of two components i.e.

­ Nutrients are naturally recycled by decomposers

grass → insects → dragon fly → frog → snake → eagle

COMPILED BY T. MUSARA pg. 5

Energy loss in food chains and food webs

COMPILED BY T. MUSARA pg. 6

­ Animals obtain the carbon by eating organic compounds from plants.

COMPILED BY T. MUSARA pg. 7

­ Nitrogen is present in all proteins of both plants and animals

COMPILED BY T. MUSARA pg. 8

­ Strict control measures are taken to control pests and diseases.

Problems caused by limited bio­diversity

COMPILED BY T. MUSARA pg. 9

COMPILED BY T. MUSARA pg. 11

Leaf adaptation for photosynthesis

COMPILED BY T. MUSARA pg. 12

Factors affecting rate of photosynthesis

­ As light intensity increases, so does the rate of photosynthesis.

Carbon dioxide concentration

­ As the concentration of available carbon dioxide is increased, the number of bubbles

Effect of water on photosynthesis

Effect of chlorophyll on photosynthesis

COMPILED BY T. MUSARA pg. 13

­ Boil the leaf in alcohol to decolorize it.

Test for oxygen

COMPILED BY T. MUSARA pg. 14

Fate of end products of photosynthesis

­ At night starch is converted to sucrose in leaves. Sucrose is translocated through

2 Cellulose for cell wall formation.

COMPILED BY T. MUSARA pg. 15

Components of a balanced diet

­ Supplies dietary fibre.

Lipids (fats and oils)

­ Help the body to absorb certain vitamins

COMPILED BY T. MUSARA pg. 16

COMPILED BY T. MUSARA pg. 17

­ Fibre binds with cholesterol to reduce cholesterol levels in the blood

­ Regulates body temperature through sweating and evaporation

Balanced meal for different groups of people

COMPILED BY T. MUSARA pg. 18

­ Drink clean safe water

Sedentary worker (office worker)

­ Nutrients are needed for normal functioning of the body

COMPILED BY T. MUSARA pg. 19

Types of teeth and their functions

Lacks a nucleus to increases surface area for absorption of oxygen.

It is responsible for contraction when stimulated by a nerve so that movement occurs.

Its function is to make food by photosynthesis.

Responsible for absorption of water and salts from the soil.

Large vacuole facilitates water absorption and storage.

An ecosystem consists of two components i.e.

Nutrients are naturally recycled by decomposers

Animals obtain the carbon by eating organic compounds from plants.

Nitrogen is present in all proteins of both plants and animals

Strict control measures are taken to control pests and diseases.

Problems caused by limited biodiversity

As light intensity increases, so does the rate of photosynthesis.

As the concentration of available carbon dioxide is increased, the number of bubbles

Boil the leaf in alcohol to decolorize it.

At night starch is converted to sucrose in leaves. Sucrose is translocated through

Supplies dietary fibre.

Help the body to absorb certain vitamins

Fibre binds with cholesterol to reduce cholesterol levels in the blood

Regulates body temperature through sweating and evaporation

Drink clean safe water

Nutrients are needed for normal functioning of the body

They are used for biting and cutting food.

They have two roots for support.

Half fill a beaker with water and warm it to about 40oC.

It is the process of taking in of soluble food substances through the epithelium of

It is a disorder of nutrition resulting from unbalanced diet.

Add a few drops of iodine solution

The Benedict’s solution changes from green/orange to red/brown/brick red precipitate

A purple colour indicates the presence of proteins

Therefore there is much more carbon dioxide in exhaled air.

Temperature rise was high in A than B

Describe observations after 30 minutes

Experiments to show release of carbon dioxide from germinating seeds

Precautions taken include;

To investigate factors influencing the rate of transpiration, a Potometer is placed under

May have thick cuticle making the leaf more waterproof

Further water loss results in wilting of the plant