METALLURGICAL THERMODYNAMICS AND

KINETICS
1st module

MME DEPARTMENT
Gce kjr
 DISCLAIMER
THIS DOCUMENT DOES NOT CLAIM ANY ORIGINALITY AND CANNOT BE USED AS A SUBSTITUTE FOR
PRESCRIBED TEXTBOOKS. THE INFORMATION PRESENTED HERE IS MERELY A COLLECTION FROM DIFFERENT
REFERENCE BOOKS AND INTERNET CONTENTS. THE OWNERSHIP OF THE INFORMATION LIES WITH THE
RESPECTIVE AUTHORS OR INSTITUTIONS. FURTHER, THIS DOCUMENT IS NOT INTENDED TO BE USED FOR
COMMERCIAL PURPOSE AND THE FACULTY IS NOT ACCOUNTABLE FOR ANY ISSUES, LEGAL OR OTHERWISE,
ARISING OUT OF USE OF THIS DOCUMENT. THE FACULTY MEMBERS MAKE NO REPRESENTATIONS OR
WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS DOCUMENT
AND SPECIFICALLY DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
 IMPORTANCE OF
THERMODYNAMICS • System : it is any portion of the
universe that is separated by rest of
• Thermodynamics is the branch of physics
the universe and is closed by a
which deals with the relationship between heat
boundary wall
and other form of energy
• Surrounding : except the system the
• In physical metallurgy the main aim of the
rest of the universe is called
study is to predict whether the alloy will be in
surrounding
equilibrium or not
• This subjects deals with the no. of parameter THREE TYPES OF SYSTEM
that made the phases to remain in equilibrium
1. OPEN SYSTEM (MASS AND HEAT TRANSFER POSSIBLE
• it also helps to predict the reaction of any
material with other material 2. CLOSED SYSTEM (ONLY HEAT TRANSFER POSSIBLE)
• All material depends on thermodynamic in one 3. ISOLATED SYSTEM (NEITHER HEAT NOR MASS TRANSFER IS
way or the other POSSIBLE)
 PROPERTY: PROCESS
EXTENSIVE PROPERTY: THE PARAMETERS THAT DEPENDS ON MASS

INTENSIVE PROPERTY: THE PARAMETERS THAT DOESNOT DEPEND ON MASS When in a system there is two or more than two parameters get changed
then it is known as system gets changed and process occurs.
EQUILIBRIUM i. Cyclic Process: Sequence of processes which return back to its
initial point.
If in a system both thermal & mechanical equilibrium exists
ii. Adiabatic Process: Process in which net heat change () is equal to
simultaneously. Then it is known as in thermodynamic equilibrium.
zero.
i. Thermal Equilibrium: Uniform temperature throughout the iii. Isothermal Process: Process in which net temperature change () is
system. equal to zero.
ii. Mechanical Equilibrium: Uniform pressure throughout the iv. Isobaric Process: Process in which net pressure change () is equal to
system. zero.
iii. Chemical Equilibrium: Uniform chemical potential throughout v. Isochoric Process: Process in which net volume change (
the system ) is equal to zero.
vi. Quasi-static Process: It is the process in which every small steps are
in equilibrium, so that entire process is in equilibrium.
 LAW’S OF THERMODYNAMICS
THE 1ST LAW OF THERMODYNAMICS
This states that the change in the internal energy of a system (ΔU) is equal to the sum of the energy added by heating the system (ΔQ) and the
energy entering the system through work being done on it(ΔW)
ΔU = ΔQ + ΔW
• This law is an expression of the principle of conservation of energy (the amount of energy in a closed system does not change)
• It is not possible to measure the total internal energy of a body, only changes in it.
• Internal energy is the sum of all energy associated with translational motion, vibrational motion and electronic configuration and it is a
state property.

HEAT CAPACITY
The amount of heat required to raise the temperature of 1 gram of substances by 1 degree Celsius. Is called heat capacity
 Hess law KIRCHHOFF’S LAW
The law states that “The total change of heat in a Kirchhoff’s law states that “If a system undergoes
chemical reaction is same irrespective whether it occurs a change from one state to another state then both
in a single step or in multiple steps provided that the internal energy & heat occur would alter.”
reaction must be isothermal or isobaric or isochoric.”
If a process occurs from A to B, then using Hess’s law
we can write as enthalpy change throughout the path
AB is equal to sum of the enthalpies throughout AC,
CD and DA.
 ADIABATIC AND ISOTHERMAL PROCESS
ADIABATIC PROCESS ISOTHERMAL PROCESS
It states that the net temperature
The net heat content in the system is zero change throughout the process is
zero i.e. ∆T = 0.
Reversible Isothermal Process:
When an ideal gas of mass m
undergoes a reversible process from
state 1 to state 2, and then work
done is given by
 SECOND LAWS OF THERMODYNAMICS
• Definition by Clasius From the microscopic point of view
There is no thermodynamics transformation • heat transfer is an exchange of energy
whose sole effect is to deliver heat form a reservoir due to the random motion of atoms;
of lower temperature to a reservoir of higher • work’s performance requires an
temperature organized action of atoms.
• Definition by kelvin In these terms, heat being converted entirely
there is no thermodynamic transformation into work means chaos changing
whose effect s to extract heat from a reservoir and spontaneously to order, which is a very
convert it entirely to work improbable process.
CARNOT CYCLE
COMBINED EXPRESSION OF 1ST AND 2ND
LAW
COMBINIG 1ST AND 2ND LAW OF THERMODYNAMICS WITH
CONSIDERING THE FOLLOWING ASSUMPTION WE GOT
 THIRD LAW’S OF THERMODYNAMICS
CONSEQUENCES OF 3RD LAW
In 1906, W. Nernst proposed his heat theory
When disorder in a substance completely vanishes, it becomes perfectly
on the basis of experimental evidence. It was ordered and has only one possible arrangement of atoms. Then and only
later generalized by Max Plank as “The then a complete internal equilibrium is established. The causes for
deviation from perfect order are
entropy of any substance (which is at i. Thermal energy and resulting motion of atoms and molecules
complete equilibrium) may take as Zero at (at T = 0K).
ii. Non-crystallinity, as in amorphous solids and liquids.
0K.” This is known as Third law of iii. Crystal defects-vacancies, interstitial atoms, dislocation.
Thermodynamics iv.
v.
Disordered compound structure.
Disordered solid solution.
At T = 0K, thermal energy is zero. Thus this source of disorder
gets eliminated. But other sources remain there. In reality it is
difficult to achieve exactly zero entropy at T = 0K. Actually,
all disorders are caused by thermal energy which get lowered
continuously and vanish at T = 0K provided internal
equilibrium exists.
 DEBYE’S THEORY OF HEAT CAPACITY
In early 20th century, Einstein represents the experimental datas of Cv of some solid elements using quantum theory. Each atom in the
crystal assumes to oscillate independently along three perpendicular directions under the harmonic motion i.e. to-fro motion. The energy
of ith energy level of harmonic oscillation is given as

Combining both equation we got

At low temperature (near 0K), the Debye equation may be simplified as

Moreover, it is concerned with elements only, that too in crystalline state. Hence, due to its limited applicability, it is a normal
practice to determine heat capacity vs Temperature relationship for solids and liquids.
REFERENCES
1. INTRODUCTION TO THERMODYNAMICS OF MATERIAL BY GASKELL, TAYLOR AND FRANCIS
2. TEXTBOOKS OF MATERIALS AND METALLURGICAL THERMODYNAMICS BY A.GHOSH
3. METALLURGICAL THERMODYNAMICS LECTURE NOTES BY VSSUT BURLA