Catalog Number

Notes Type

Petrolux® LED Description

For hazardous locations where dust, dirt and moisture are a concern.
Mechanical
• Robust cast aluminum housing with low copper content (0.6% CU
Hazardous Locations Optics
content) withstands harsh or hostile environments.
• Universal mount (UNM) for ceiling/pendant or Universal mount
• Prismatic borosilicate glass directs light where needed and reduces (UNST) for wall/stanchion mountings available.
harsh glare.
• Precise number of fins dissipate maximum amount of heat
• Polycarbonate lens available for those applications requiring non-
glass options. Listings
• Three distributions (Type 5 low angle, Type 5 high angle, and Type 1 • UL Listed to US and Canadian Standards
long and narrow) available to maximize versatility. • Suitable for use in hazardous locations (UL844)
• Highly engineered LED system ensures superior uniformity and Class I, Division 2, Groups A, B, C, D
maximizes spacing. Class II, Division 1, Groups E, F, and G
• Certain airborne contaminants may adversely affect the Class III
functioning of LEDs and other electronic components, depending Simultaneous presence (Class I Division 2, Class II Division 1)
on various factors such as concentrations of the contaminants, • Zone Equivalency Markings (See chart on page 5)
ventilation, and temperature at the end-user location. Click • -40°F (-40°C) to 131°F (55°C) (see chart on page 4)
here for a list of substances that may not be suitable for
interaction with LEDs and other electronic components. • IP66 rated
• NEMA 4X rated
Electrical
• Luminaire Surge Protection Level: Designed to withstand up to Warranty
10kV/5kA per ANSI C82.77-5-2015. 5-year limited warranty. This is the only warranty provided and no
• 0-10V dimming driver is standard. Dims to 10%. other statements in this specification sheet create any warranty of
any kind. All other express and implied warranties are disclaimed.
• 70CRI (nominal) is standard. Complete warranty terms located at: www.acuitybrands.com/
• 4000 K or 5000 K CCT available. support/warranty/terms-and-conditions
• Fault-tolerant LED light engine continues to provide light even in
Note: Actual performance may differ as a result of end-user
the failure of one LED.
environment and application.
All values are design or typical values, measured under laboratory
conditions at 25 °C.

Typical Applications Dimensions

• Petroleum refineries • Water and wastewater
• Ethanol facilities treatment facilities Diameter: 14.76 in. (374.9 mm.)
• Chemical plants • Parking garages Depth: 13.57 in. (344.68 mm.)
• Power plants • Tunnels Weight: 38-45 lbs. (17.24-20.41 kg.)
• Textile mills EPA: 1.21 sq.ft.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] HPLED
©2012-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/10/23 Specifications subject to change without notice. Page 1 of 5
Petrolux® LED
Hazardous Locations

ORDERING INFORMATION Example: HPLED 70LED LNDP MVOLT 40K UNM 700MA 45C DGXD

Series Number of LEDs Distribution Voltage Color temperature

HPLED 42LED 42 LEDs LND Long and Narrow, LNDP Long and Narrow, MVOLT Auto Sensing HVOLT Auto Sensing 40K 4000K CCT +/- 250
56LED 56 LEDs Glass ‡ Polycarbonate (120-277V, (347-480V, 50K 5000K CCT +/- 250
L5 Type 5, low angle, L5P Type 5, low angle, 50/60Hz) 50/60Hz)
70LED 70 LEDs
Glass Polycarbonate 120 120V, 347 347V,
84LED 84 LEDs 50/60Hz 50/60Hz
L5H Type 5, high angle, L5HP Type 5, high angle,
Glass Polycarbonate 208 208V, 480 480V,
50/60Hz 50/60Hz
240 240V,
50/60Hz
277 277V,
50/60Hz

Mounting Drive Current Maximum ambient ‡ Options Finish

UNM Universal (Ceiling and Pendant) ‡ 350MA 350mA driver ‡ 35C Maximum 35C operating ambient temperature EMD Ingress/Egress Marker Decal DGXD Gray
UNST Universal (Wall and Stanchion) ‡ 530MA 530mA driver ‡ 40C Maximum 40C operating ambient temperature SF Single Fusing ‡
700MA 700mA driver 45C Maximum 45C operating ambient temperature DF Double Fusing ‡
55C Maximum 55C operating ambient temperature WGX Factory Installed Wire Guard
UPS Factory Installed Uplight Shield ‡

NOTE: ‡ indicates option chosen has ordering restrictions. Please reference ordering restrictions chart. Options are sorted alphanumerically.

Accessories: Order as separate catalog number. ‡ Option Value Ordering Restrictions & Notes
Option value Restriction
HSCKX X Inch Safety Chain Kit ‡
350MA, 530MA Available with 42LED option only.
PLEDGD Wire Guard
DF Must specify voltage. 208, 240 or 480 only.
PLEDUPS DGXD Uplight Shield Gray Finish ‡
HSCKX X denotes length. Available in multiple sizes. Replace X with size in inches.
MI3688 THREAD SEAL Thread lubricant (1 tube is enough Example: HSCK120 = 120 inches or 10 feet.
for 20 luminaires)
LND Available with 42LED, 56LED and 70LED options only.
Maximum Ambient See chart on page 4.
SF Must specify voltage. 120, 277, or 347 only.
UNM P3US arm is not certified for field installation with UNM mounting. Ceiling or
pendant mounting only.
UNST P3US arm is factory installed. Wall or stanchion mounting only.
UPS, PLEDUPS DGXD Available with L5 or L5P distribution only.

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] HPLED
©2012-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/10/23 Specifications subject to change without notice. Page 2 of 5
Petrolux® LED
Hazardous Locations

DIMENSIONAL DATA

1" NPT BOTH SIDES

375mm 3/4" NPT
[14.76"]
45°
CEILING PENDANT
MOUNTING MOUNTING

2X DIA 7.54mm [.297"]

MOUNTING HOLES

UNM Universal (ceiling & pendant)

75mm 124mm
1" NPT
[2.94"] [4.88"]
Both Sides

Wall Stanchion

1-1/2" NPT

2X DIA 9mm [.358"]

225mm
Mounting Holes
[8.85"]
UNST Universal (wall & stanchion)
(includes P3US arm, cannot be field installed)

324mm
(12.75")
To Optic

245mm 342mm
(9.64") (13.46")
GD Option

386mm 345mm
(15.18") (13.57")
SH Option SH Option

Uplight Shield (UPS) & Optic Guard (WGX) Options

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] HPLED
©2012-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/10/23 Specifications subject to change without notice. Page 3 of 5
Petrolux® LED
Hazardous Locations

OPERATIONAL DATA

Operating Characteristics

Ambient Rating Ambient Rating Delivered Lumens Delivered Lumens LPW @

Package Distribution Wattage
(120V - 277V) (347V / 480V) 5000K CCT @25°C1 4000K CCT @25°C1 5000K

L5 6,189 6,150 50 124

L5H 5,234 5,201 50 105
-40°F to 131°F -40°F to 104°F LDN 5,066 5,035 50 101
HPLED 42LED 350MA
(-40°C to 55°C) (-40°C to 40°C) L5P 4,493 4,493 50 90
L5HP 3,852 3,852 50 77
LNDP 3,772 3,772 50 75

L5 8,927 8,872 74 121

L5H 7,550 7,503 74 102
-40°F to 131°F -40°F to 104°F LDN 7,308 7,263 74 99
HPLED 42LED 530MA
(-40°C to 55°C) (-40°C to 40°C) L5P 6,522 6,481 74 88
L5HP 5,592 5,557 74 75
LNDP 5,476 5,442 74 74
L5 11,315 11,245 98 115
L5H 9,569 9,510 98 97
-40°F to 131°F -40°F to 104°F LDN 9,263 9,205 98 94
HPLED 42LED 700MA
(-40°C to 55°C) (-40°C to 40°C) L5P 8,266 N/A 98 84
L5HP 7,087 N/A 98 72
LNDP 6,940 N/A 98 71
L5 14,822 14,790 129 115
L5H 12,586 12,508 129 97
-40°F to 122°F -40°F to 95°F LDN 12,183 12,107 129 94
HPLED 56LED 700MA
(-40°C to 45°C) (-40°C to 35°C) L5P 10,872 10,804 129 84
L5HP 9,321 9,263 129 72
LNDP 9,128 9,071 129 71
L5 18,309 18,195 165 111
L5H 15,484 15,837 165 94
-40°F to 113°F -40°F to 95°F LDN 14,988 14,895 165 91
HPLED 70LED 700MA
(-40°C to 45°C) (-40°C to 35°C) L5P 13,375 13,292 165 81
L5HP 11,468 11,396 165 69
LNDP 11,230 11,160 165 68

L5 21,575 21,441 195 110

-40°F to 104°F -40°F to 86°F L5H 18,246 18,133 195 93
HPLED 84LED 700MA
(-40°C to 40°C) (-40°C to 35°C) L5P 13,375 15,663 195 68
L5HP 11,468 13,429 195 69

Projected Lumen Maintenance (TM-21)2

Notes
15,000 30,000 45,000 60,000 100,000 1 Absolute photometry calculated in accordance with IESNA LM-79-08
Package 3
0 Hours 2 Calculated using data collected according to LM-80 and represents
Hours Hours Hours Hours Hours
lumen maintenance of the LED package.
3 Project lumen maintenance factors at max. ambient temperature per
HPLED 42LED 350MA 1.0 0.96 0.94 0.93 0.91 0.88 lumen package.
HPLED 42LED 530MA 1.0 0.96 0.94 0.93 0.91 0.88
HPLED 42LED 700MA 1.0 0.96 0.94 0.93 0.91 0.88
HPLED 56LED 700MA 1.0 0.95 0.93 0.91 0.90 0.85
HPLED 70LED 700MA 1.0 0.95 0.93 0.91 0.90 0.85
HPLED 84LED 700MA 1.0 0.95 0.93 0.91 0.90 0.85

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] HPLED
©2012-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/10/23 Specifications subject to change without notice. Page 4 of 5
Petrolux® LED
Hazardous Locations

Operating Temperature Codes for Hazardous Locations:

Class I Class II, Simultaneous Presence:
Voltage Max
Package Division 2, Division 1, Class III Class I Division 2 &
Range Ambient Rating Groups A, B, C, D Groups E, F, G Class II Division I
120-277 55°C T4 T5 T5 T3C
HPLED 42LED 350MA 347-480 40°C T4A T5 T5 T3C
120-277 55°C T4 T5 T5 T3C
HPLED 42LED 530MA 347-480 40°C T4A T5 T5 T3C
120-277 55°C T4 T5 T5 T3C
HPLED 42LED 700MA 347-480 40°C T4A T5 T5 T3C
120-277 45°C T4 T5 T5 T3C
HPLED 56LED 700MA 347-480 35°C T4 T5 T5 T3C
120-277 45°C T4 T5 T5 T3C
HPLED 70LED 700MA 347-480 35°C T4 T5 T5 T3C
120-277 40°C T4 T5 T5 T3C
HPLED 84LED 700MA 347-480 35°C T4 T5 T5 T3C

DISTRIBUTION DATA
L5/L5P L5H/L5HP LND/LNDP UPS
Petrolux LED Type 5 Low Angle Petrolux LED Type 5 High Angle Petrolux LED Type 1 Petrolux LED Type 5-0% Uplight
90° 90° 90° 90°

80° 80° 80° 80°

700 600

70° 70° 70° 2000 70°

900 1200

60° 60° 60° 60°

2100

4000
2250
50° 50° 50° 50°

0° 10° 20° 30° 40° 0° 10° 20° 30° 40° 0° 10° 20° 30° 40° 0° 10° 20° 30° 40°

Zone Equivalency Markings Number of LED Boards and Drivers Used

NEC Protections Lumen Number of LED Number of drivers
Area Protection Techniques Zone Equivalency Markings Package boards per fixture per fixture
Class I
42LED 2 1
Hermetically-sealed CLASS I, DIV 2, GROUP D CLASS I, ZONE 2 GROUP IIA
56LED 2 1
Nonincendive CLASS I, DIV 2, GROUP C CLASS I, ZONE 2 GROUP IIB
70LED 2 2
Non-sparking CLASS I, DIV 2, GROUP B CLASS I, ZONE 1 GROUP IIB PLUS HYDROGEN
Division 2 84LED 2 2
Purged/Pressurized (Type Z)
CLASS I, DIV 2, GROUP A &
Any Class I, Division 1 technique CLASS I, ZONE 2 GROUP IIC
CLASS I, DIV 2, GROUP B
Any Class I, Zone 0, 1, or 2 technique
Class II
Intrinsic Safety
CLASS II, DIV. 1,
Division 1 Dust-ignitionproof CLASS II ZONE 20 AND ZONE 21
GROUP E, F, OR G
Pressurized
Class III
Intrinsic Safety
Division 1 Dusttight N/A N/A
Hermetically-sealed
Nonincendive
Division 2 N/A N/A
Any Class III, Division 1 technique

Holophane | One Lithonia Way, Conyers, GA 30012 | Phone: 866-HOLOPHANE | www.holophane.com | [email protected] HPLED
©2012-2023 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/10/23 Specifications subject to change without notice. Page 5 of 5