APPLICATION NOTE

Monitoring options for Conext RL

By Srikanta Prasad and Ranjeet Kuberkar

Abstract
In an environment of ever-diminishing FiTs, monitoring the PV plant performance is becoming increasingly important in order to
maximize the ROI. To fulfill this need, Conext RL provides the users with an option to monitor the PV plant performance locally
as well as remotely. Additionally the data logger from Schneider Electric can be used as a control unit to facilitate remote active
power management of the inverter as per the regulatory requirements in some countries. To enhance your ability to use other
third party monitoring solutions for your PV plant, Schneider Electric consistently works with the leading independent monitoring
solutions providers to make sure their monitoring solutions are compatible with Conext RL.

Introduction
The new single phase grid tie inverter “Conext RL” from Schneider Electric comes with the following two monitoring options:

Local monitoring: You can use the Ethernet card from Schneider Electric to monitor the performance of the PV plant from the
comfort of the home.

Figure 1 – Ethernet card

Remote monitoring: You can use Conext Monitor 20 from Schneider Electric to log the data to a web portal. You can then
access this web portal on your computer/laptop/tablet from anywhere using a web browser.

Figure 2 – Conext Monitor 20

1
____________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013--0
 APPLICATION NOTE

This application note explains the key features of these monitoring options available with Conext RL.

Local monitoring
“I just need to monitor basic PV plant performance when I am at home”
As shown in Figure 3 below, you can choose the Ethernet card to monitor the PV plant performance from the comfort of the
home. With the Ethernet card you can connect the Inverter to your computer/laptop and access the PV plant performance
using a web browser.

Figure 3 – Local monitoring options for Conext RL: wired access

You can also connect the Ethernet card to a wireless router and access the PV plant performance in a wireless manner on
your computer/ laptop/tablet. That brings added comfort to you to access the monitoring web pages without the need of
connecting an Ethernet cable to your computer/laptop/tablet.

Figure 4 – Local monitoring options for Conext RL: wireless access

The Ethernet card is easy to install and configure. Refer to the detailed user manual of the product at
www.schneiderelectric.com/solar for more details about the installation and configuration.

With Ethernet card, you are able to access the dashboard as shown in Figure 5 below.

2
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08
 APPLICATION NOTE

Figure 5 – Dashboard of Ethernet card web pages

The important information represented in the dashboard is:

• Current power and energy generation: Details about current power and energy generated.

• Historical energy generation details: Details about historical energy generation by day, month and year.
Such analysis is important to monitor the trend in the energy generation and to identify issues, if any,
proactively.

• Other important details: In addition to the above mentioned details, the dashboard also helps you to monitor
remuneration, environmental impact, inverter status, inverter power factor and current power limit.

In addition to the dashboard, as a plant owner, you get access to user-friendly screens for configuration of the Ethernet card.
For the installer, the application provides access to advanced inverter configuration and firmware upgrade functionality.

Remote monitoring
“I need bit more details of PV plant performance and flexibility in access location”
If you want a little advanced information of your PV plant performance and want to access the PV plant performance
irrespective of location, then you can choose Conext Monitor 20.

Conext Monitor 20 is a compact, low-cost monitoring and control unit. It is suitable for PV systems upto 20kW (not more than
three inverters). Conext Monitor 20 allows simple configuration and start-up.

3
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08
 APPLICATION NOTE

Figure 6 – Conext Monitor 20

As shown in Figure 7 below, connecting the Conext Monitor 20 to the Internet via Ethernet allows the operating data to be
visualized and monitored regardless of the location using the web portal.

Figure 7 – Remote monitoring option for Conext RL: Conext Monitor 20

After you login into the web portal of Conext Monitor 20 (i.e., Conext Monitor Web), you get access to the dashboard of the
application as shown in Figure 8 below.

4
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08
 APPLICATION NOTE

Figure 8 – Dashboard of Conext Monitor Web

The dashboard displays key information as below:

• System data: Data regarding today’s yield, date of installation, installed power, total energy generation, and
the technical data (entered at the time of registration).

• Performance: Local and regional benchmarking of the yield in the current month and the current year as well
as yield in the past month and the past year.

• Environmental savings: Information regarding environmental impact due to the installation of the PV plant
e.g., CO2 emission avoided, number of trees saved, etc.

• Historical energy generation: The charts provide information about the energy generated by
hour/day/week/month/year.

Additionally, the portal also provides you information about remuneration through the FIT and functionality to check the current
inverter status.

The data logger has a value-added feature of being able to act as a control unit in case the local regulations mandate remote
active power management. You can also set up an audible alarm to alert you in the event of a fault.

Refer to the user manual of Conext Monitor 20 at www.schneiderelectric.com/solar for detailed information about installation
and configuration.

5
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08
 APPLICATION NOTE

Choice of monitoring option

“So which of the two monitoring options should I choose?”
You can refer to the following comparison of the local and remote monitoring features of Conext RL to make a decision on
what option you need:

Table 1 – Comparison of local and remote monitoring features

Requirement Local Monitoring using Remote Monitoring using
Ethernet card Conext Monitor 20

Current and historical energy generation Y Y

data

Regional benchmarking of PV plant N Y

performance

Environmental impact Y Y

Remuneration Y Y

Access to monitoring data irrespective of N Y

location

Monitor more than one inverters N Y (max plant size 20kW,

up to 3 inverters)

Remote active power management N Y

Audible alarm in case of a fault N Y

Third-party monitoring solution

“I would like to use a third party monitoring solution”
If you would like to use a third-party solution from an independent monitoring solutions provider, that is perfectly fine with us.
We work with the leading independent monitoring solutions providers in the world to make sure their monitoring solutions are
compatible with our inverters.

The following is the list of the vendors and their data loggers that are compatible with Conext RL

Table 2 – Third party monitoring solutions compatible with Conext RL

Vendor Data logger

Meteocontrol WEB’log Residential, WEB’log Comfort

6
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08
 APPLICATION NOTE

Visit our website www.schneiderelectric.com/solar for the updated list of third party solutions with which Conext RL is
compatible and for the related application notes.

If we have not included any of the popular third party monitoring solution providers in your country, do not hesitate to get in
touch with our customer support team. We would consider working with the suggested vendor to ensure compatibility with
Conext RL.

About the Authors:

Srikanta Prasad is Firmware Functional Manager with Schneider Electric. He is based in the global R&D center of Schneider
Electric in Bangalore.
Ranjeet Kuberkar is a Global Product Line Manager with Schneider Electric. He is based in the global R&D center of
Schneider Electric in Bangalore.

7
___________________________________________________________________________________________________

2013 Schneider Electric. All rights reserved. No part of this publication may be used, reproduced, photocopied, transmitted,
or stored in any retrieval system of any nature, without the written permission of the copyright owner. www.schneider-electric.com Rev 2013-08