MATERIAL SAFETY DATA SHEETS

REV. : 00 TSD/F/020
REV. 00

1. MANUFACTURER AND PRODUCT INFORMATION :

Company Name : PT. KANSAI PRAKARSA COATINGS
Office’s Addres : Jl. Hayam Wuruk 28, Lantai 4, Jakarta 10120.
Phone no. : ( 021 ) 385-4121, 385-4125
Fax no. : ( 021 ) 381-0929, 385-4119
Plant’s Address : Jl. Gatot Subroto Km.7, Ds. Pasir Jaya, Kec. Jati Uwung, Tangerang 15135.
Phone no. : ( 021 ) 590-3931/3932/3933
Fax no. : ( 021 ) 590-5561/3930
Emergency phone no. : ( 021 ) 590-1314
Person in Charge : Technical Senior Manager / TSD Manager
Name of Preparer : Sri Murdawati ( TSD Supervisor )
Date Prepared : November 13, 2015

Product Name : KANSAI ZINC PHOSPHATE PR L. GREY

Product Code : 50-141-155-1069/1085/1105
Product Type : Alkyd Paint
Used for : Primer for construction and industrial coatings
Packing size : 1, 5, 25 kg in metal can

2. HAZARDS IDENTIFICATION :
Classification : * Flammable Liquid.
* Irritation
* Dangerous to environment

Comments of Hazard : * Flammable Liquid and vapor, concentrating of its vapor may cause explosion.
* Harmful if swallowed. May causes eyes, skin and respiratory tract irritation.
* May cause long term adverse effects in the aquatic environment

3. INFORMATION ON INGREDIENTS :
NO Component Name Weight CAS NO. TLV LD50 (Mouth)
% ppm mg/m3 mg/kg
1. Alkyd Resin 20 - 30 67989-65-5 - - -
2. Anti Corrosive I 1-5 7779-90-0 - 10 >5000
3 Anti Corrosive 2 1–5 1314-13-2 - 5(fume) -
4. I. O. Yellow <1 51274-00-1 - 5( dust) >5000
5. P. White 1 – 10 13463-67-7 - 10 >10000
6. P. Black < 0.01 1333-86-4 - 3.5(dust) >10000
7. P. Blue < 0,01 147-14-8 - 10 >6400
8. Extender 25 - 35 1317-65-3 - 10 >6450
9. Solvent HC - M1 10 – 30 8052-41-3 - - -
10. Drier 1 0.1 – 0.5 18312-04-4 - - > 5100
11. Drier 2 0.1 - 0. 5 61789-51-3 - 1200 > 3900
12. Additive 1 0.1 - 0. 5 96-29-7 3 10 > 2528
13. Additive 2 0.1 - 0.5 N. AV - 10 >8

-1-
REV. : 00 TSD/F/020
REV. 00

4. FIRST AID MEASURES :

Eye Contact : * Flush immediately with clean water for 15 minutes or more. Wash sufficiently the back
of the eyelids.
* Consult physician as soon as possible, showing “MSDS”.
Skin Contact : * Wipe quickly clinging matter with clean cloth.
* Flush with plenty of water and soap. Do not use Thinner or Solvent.
* Get medical attention, showing “MSDS”, if symptom or pain persists.
Inhalation :* If disorder occurs for inhalation of vapor or gas, remove immediately to fresh air and rest
with keeping warm. Perform artificial respiration if breathing gets irregular or stops.
* If disorder occurs for inhalation of vapor or gas, remove to fresh air, keep quiet and
immediately consult physician, showing “MSDS”.
Ingestion : * If one swallows accidentally, rest and consult physician immediately, showing “MSDS”.
* Avoid forcing swallow to vomit.

5. FIRE FIGHTING MEASURES :

Extinguishing Media : Carbon Dioxide gas, Foam, Powder, Dry sand
Prohibited extinguisher : Water ( cylindrical )
Fire Fighting Instruction : * Wear proper protectors ( Heat resistance wear ).
* Remove immediately flammable matters.
* Use specified extinguisher.
* Avoid using immediately flammable matters.

6. ACCIDENTAL RELEASE MEASURES :

PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES :

* Wear protective equipment as gloves, respirator, safety goggles, apron, etc.
* Remove immediately ignition source or heat source and the other flammable matters.
* Furnish extinguisher proper for accidental fire.

ENVIRONMENTAL PRECAUTIONS :
* Take precautions so as not to pollute rivers, lakes, etc.

METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP :

* Recollect leak in container and keep in safety place with the container closed.
* Dispose of waste or clinging matter according to related regulations.
* Recollect with tool of non-spark material.
* Recollect by absorbing with dry sand or soil or other non-flammable matter. Prevent from flowing out by
banking, if in large volume.
* Keep dirty rag, paint sludge and paint dust soaking in water before disposing off.

7. HANDLING AND STORAGE :

STORAGE CONDITION : * Avoid direct sunlight.

* Store in good ventilation
* Store with keeping away from ignition or heat source.

-2-
REV. : 00 TSD/F/020
REV. 00

HANDLING :
* Handle in well ventilated area and close tightly container with closer necessarily during and after used.
* Take away from open flame, spark and heat source.
* Wear anti static suits and shoes, while working
* Use hand tools of spark proof type.
* Ground equipment for the prevention of static electricity accident because of generating easily static
electricity and use electric appliance or apparatus of explosion proof type because of containing
organic solvent.
* Wear proper protectors to avoid contact of skin, eyes and mucous.
* Wash thoroughly hands and face after handling. Avoid bringing contaminated protectors in any place
where person stays.
* Install proper local ventilator and wear proper protector in closed space.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION :

APPROPRIATE ENGINEERING CONTROLS :

* Use explosion proof type equipment.
* Install proper exhauster to prevent concentrating of vapor.
* Ground equipment for fluid transfer, pumping and stirring.
* Use equipment devised so that heat or ignition source can not be placed in the neighborhood of handling
place.
* In indoor application, use automatic applicator or install proper equipment or local exhauster to avoid direct
exposure to spray mist.
* In application in closed space or the like (tanks), install equipment which can sufficiently ventilate even its
bottom.
* In handling for long time, use equipment devised so that sufficient ventilation can be ensured and exposure
to exhaust gas can be avoided.

PERSONAL PROTECTIVE EQUIPMENTS :

Eye protection : Wear safety goggles.
Respiration and Ventilation : Wear gas mask for organic gas. Wear air mask in closed space.
Skin and Body protection : Wear suitable clothing to avoid direct contact of skin when handle.
Hand protection : Wear gloves impervious to organic solvent and chemical.

9. PHYSICAL AND CHEMICAL PROPERTIES :

Appearance : Liquid
Color : Light Grey
Odor : Organic solvent smell
pH value : N.AP.
Boiling Point : 149°C
Flash Point : 42ºC
Explosion Limit : (Lower) 1.1% (Upper) 5,9%
Specific Gravity : 1.38 ± 0.03
Vapor pressure : -
Ignition Point : 288 ºC
Volatile by wt. : 25-30 %
Solubility in H2O : N. AP. (% by wt.)

-3-
REV. : 00 TSD/F/020
REV. 00

10. STABILITY AND REACTIVITY :

Reactivity and Stability : Condition (Temperature & light etc.) : Reacts at 100ºC or higher.
Hazardous Reaction : Generates heat in contact with oxidizing substance.
Dangerous Substance Generation / Product decomposition : Emits hazardous gases CO & (NO)x
May explode when burnt in large vol.
Additional Information : Avoid leaving cloth, paper, brush or roller which contaminated with the
paint or spray dust, or its dust to accumulate or to be made round.

11. TOXICOLOGICAL INFORMATION :

Additional Component Toxicity Information : Not available.
Product Toxicity Information : The toxic property of final product is untested.
Routes of exposure : inhalation, ingestion, skin and eye contact
Acute exposure : High vapour concentrations may be irritating. Direct contact with this material
causes eyes irritation. Prolonged or repeated skin contact can result in drying of
the skin. Inhalation of vapour or aerosol may cause irritation to the respiratory tract
( nose, throat and lungs )
Chronic exposure : Prolonged or repeated exposure may cause damage to the central nervous system
include loss of memory or loss of coordination

12. ECOLOGICAL INFORMATION :

The aquatic toxicity of this product has not been determine, avoid discharge to all bodies of water
Ecotoxicity : N.AV
Persistence and degradability : N.AV
Bioaccumulative potential : N.AV
Mobility in soil : N.AV

13. DISPOSAL CONSIDERATIONS :

* Let authorized industrial waste handling agent dispose of paint waste, container waste, etc. by making
service agreement.
* Do not dispose of waste water after cleaning container, equipment, tools, etc into the ground and drainage
ditch without treatment.
* Dispose of waste from effluent treatment, incineration, etc., complying to regulations or acts relating to
waste treatment or cleaning or let special handling agent dispose of them.
* Burn up paint waste, additive waste etc., little by little using incineration of open type with them absorbed
in diatomaceous earth.
* Dispose of used container after emptied completely.

14. TRANSPORT INFORMATION :

General : Ensure the container does not leak and be sure to prevent it from collapsing by loading with it so
that it may not overturn or fall down or sustain damage.
UN Number : 1263
UN proper shipping name : paint and paint related material
IMO / IMDG : Class : 3
Packing group : III
Labeling : Class 3 FLAMMABLE LIQUID
Transport in accordance with applied laws and regulations in the country or territory.

-4-
REV. : 00 TSD/F/020
REV. 00

15. REGULATORY INFORMATION :

* “Fire Service Law” : Dangerous Materials Class 4 Flammable liquids group 2 Petroleum.
* “Enforcement Order of Industrial Safety and Health Law” : Flammable Substances.
* “Regulation on Organic Solvents Poisoning Prevention” : Class 2 Organic Solvents.
* “Industrial Safety and Health Law” : Harmful Materials, Which Shall be Labeled.

16. OTHER INFORMATION :

References :
* Raw Material Information, took from Raw Material’s Technical Data, MSDS given and prepared by
Supplier
* “MSDS Guide Book for Mixtures (Paint)”, edited by Japan Paint Manufacturers Association

Remarks :
This “MSDS” does not always ensure the accurate assessment on the product or material.
Hazard information on paint product is estimated as a mixture based on that individual raw material.
Handle safely the product or material on your responsibility according to the “MSDS”.
This “MSDS” is subject to change without notice.

Definitions and abbreviations :

LD50 : means the amount of a chemical, given all at once, which causes the death of 50% of a
group of test animals
ACGIH : American Conference of Governmental Industrial Hygienists.
CAS : Chemical Abstract Service
IMO : International Maritime Organization
TLV : Threshold Limit Value
ppm : part per million
N.AV : Not Available
N.AP : Not Applicable.

-5-