1.

7M DAY CAB 8X4

SPECIFICATIONS
1690

2115

F.F.H R.F.H

FLAT 940
2.3M 970 Wheelbase
ROOF SLEEPER Cut-Off

2.3M AERO ROOF SLEEPER 8X6

525 EURO 5 EXHAUST & GRAB HANDLE

2330

3130 MAX
CONFIGURATION 3000
2700
6X4 standard

8 X 4, 8 X 6, 10 X 6, 8 X 4 (tandem with lazy axle), 10 X 4 (tandem with lazy axle) optional

GCM F.F.H R.F.H
NOMINAL 97 TONNE LIMIT AND UP TO 250 TONNE BASED ON APPLICATION AND CONFIGURATION*
* Higher GCM ratings available subject to Application and Engineering approval. 970 Wheelbase Cut-Off

CAB
2.3M FLAT ROOF SLEEPER standard

1.7M FLAT ROOF DAY CAB / 2.3M AND 2.8M AERO ROOF SLEEPER optional
SUSPENSION 2.3M FLAT ROOF SLEEPER 10X6
FRONT - TAPER LEAF, MULTI LEAF / REAR - AIRBAG, MECHANICAL 525 EURO 5 EXHAUST & GRAB HANDLE

TRANSMISSION 2330

3130 MAX
FRONT FRAME HEIGHT (F.F.H) mm 2115
Tyres
Front
Spring 11R22.5 275/70 R22.5 295/80 R22.5 305/70 R22.5
R168 R156 R154 KMAX S F.F.H R.F.H

6.5t Multi 1110 1070 1115 1079

1910 Wheelbase Cut-Off
7.2t Multi 1140 1100 1145 1109
7.2t Taper 1070 1025 1070 1035
11.7t Taper 1100 1060 1110 1069
12t Taper 1090 1040 1090 1056
REAR FRAME HEIGHT (R.F.H) mm 2.8M AERO ROOF SLEEPER 6X4
Tyres
Rear 2830 520 EURO 5 EXHAUST & GRAB HANDLE
Suspension 11R22.5 275/70 R22.5 305/70 R22.5
M866 M749 ECOPIA XMULTI-D
Airglide 400 and 600 1040 995 1010
3130 MAX
Airglide 460, 690 and Airglide 460 3000
1075 1030 1050
+ Toughlift FMT 2700

KW6-60A Low Profile 18t and 21t 1105 1060 1075

Hendrickson PAX 462 1065 1020 1035
F.F.H R.F.H
Neway AD246/10, AD260/10,
1065 1020 1035
AD369/10 and AD378/10
970 Wheelbase Cut-Off
EXHAUST OPTIONS
Rear of Cab Projection mm
K220
1.7m Cab 2.3m Cab 2.8m Cab
484 474
Post Mounted EGP – Euro 5 N/A
(+ 41 Grab Handle) (+ 44 Grab Handle)

Post Mounted EGP RHS Extreme 444

N/A N/A
Forward & Outboard – Euro 5 (+ 23 Grab Handle)
IMPORTANT NOTES
591 580 All frame height dimensions are to the top of the frame using 273mm
Post Mounted SMA – Euro 6 N/A rails. For illustration purposes different configurations have been used.
(+ 41 Grab Handle) (+ 44 Grab Handle)
Variations will occur due to tare weight differences caused by optional
Ground Discharge equipment and fuel. Variations of +/- 25mm can be expected on heavy
K220 duty trucks. Heights have been calculated with the tyre in an unladen
1.7m Cab 2.3m Cab 2.8m Cab condition and unless specified Bridgestone tyres have been used in the
In Chassis EGP Twin Steer Single and Twin Steer Single and Twin Steer calculations, variations will be caused by different tyre manufacturers.
For a wide range of options, contact your Kenworth Dealer.
Outside of Rail EGP N/A PBS* N/A
* PBS Spec – 4050mm wheelbase (extended wheelbase considered upon request).

ENGINE PROTRUSION
Protrusion mm
Make Model
1.7m Cab 2.3m Cab 2.8m Cab
Cummins X15 415 N/A N/A
* Protrusion is measured from Back of Cab to Back of Engine Flywheel Housing.
MAIN SPECIFICATIONS
AND OPTIONS

X15 CUMMINS ENGINE REAR AXLE

X15 EURO 5 - 485 hp / 1650 lb-ft standard DANA D46-170 - 20.9t GAWR standard
X15 EURO 5 - 485 hp - 600 hp / 1850 lb-ft optional DANA D50-170 - 22.7t GAWR optional
X15 EURO 5 - 550 - 600 hp / 2050 lb-ft optional DANA D52-190 - 23.6t GAWR optional
X15 EURO 6 ‘EFFICIENCY’ - 550 - 580 hp 2050 lb-ft optional DANA D52-590FL - 23.6t GAWR optional
X15 EURO 6 ‘PERFORMANCE’ - 525 - 625 hp 1850 / 2050 lb-ft optional DANA T78-590FL - 35.4t GAWR optional
DANA D46-170 WITH LAZY TAG - 30.9t GAWR optional
KITS DANA D52-190 WITH LAZY TAG - 33.6t GAWR optional
FUEL HAUL & GAS HAUL optional DANA D46-170 WITH HENDRICKSON TOUGHLIFT FMT - 29.9t GAWR optional
MERITOR MT21-165G - 20.9t GAWR optional
ADBLUE
MERITOR MT23-168GP - 22.7t GAWR optional
180L UREA TANK standard
MERITOR RT52-185 - 23.6t GAWR optional
100L 625MM DIA UREA TANK (TWIN STEER ONLY) optional
MERITOR RZ78-188 - 29.5t GAWR optional
170L 625MM DIA UREA TANK (TWIN STEER ONLY) optional
MERITOR MT21-165G WITH LAZY TAG - 30.9t GAWR optional
300L 625MM DIA UREA TANK (TWIN STEER ONLY) optional
MERITOR RT52-185 WITH LAZY TAG - 33.6t GAWR optional
AIR CLEANER MERITOR MT21-165GP WITH HENDRICKSON TOUGHLIFT FMT
optional
 ONALDSON 2501 ENGINE MOUNTED AIR CLEANER
D standard - 29.9t GAWR
DUAL PACCAR 15” STAINLESS STEEL POST MOUNTED AIR CLEANERS optional SISU FR2P-32 - 32t GAWR optional
SISU FR3P-48 - 48t GAWR optional
TRANSMISSION – AUTOMATED MANUAL (AMT)
ENDURANT XD PRO™ EXDP-18F118D AUTOMATED, 1850 lb-ft optional SAFETY SYSTEMS
ENDURANT XD PRO™ EXDP-20F118D AUTOMATED, 2050 lb-ft optional ABS – ANTILOCK BRAKING SYSTEM standard
DTC – DRAG TORQUE CONTROL standard
TRANSMISSION – MANUAL ATC – AUTOMATIC TRACTION CONTROL standard
EATON RTLO18918B 18 SPEED, 1850 lb-ft standard ESP – ELECTRONIC STABILITY PROGRAM** standard
EATON RTLO20918B 18 SPEED, 2050 lb-ft optional ACE – ACTIVE CAB ENTRY STEPS optional
EATON RTLO22918B 18 SPEED, 2250 lb-ft optional HSA – HILL START ASSIST* optional
TRM – TRAILER RESPONSE MANAGEMENT optional
FRONT AXLE SOD – BLINDSPOTTER SIDE OBJECT DETECTION SYSTEM optional
DANA E-1462I - 6.6t GAWR standard
INTEGRATED ACTIVE SAFETY SYSTEMS optional
DANA D2000F - 7.3t GAWR optional
ACC – ADAPTIVE CRUISE CONTROL WITH BRAKING TO A
DANA DUAL E-1462I - 13.2t GAWR optional
COMPLETE STOP
MERITOR MFS66-122 - 6.6t GAWR optional
HDW – HIGHWAY DEPARTURE WARNING WITH BRAKING
MERITOR MFS73 - 7.3t GAWR optional
LDW – LANE DEPARTURE WARNING
MERITOR MFS75 - 7.5t GAWR optional
CMS – COLLISION MITIGATION, INCLUDING
MERITOR DUAL MFS66-122 - 13.2t GAWR optional
SVB – STATIONARY VEHICLE BRAKING
BRAKES AEB – AUTONOMOUS EMERGENCY BRAKING
DRUM standard MAEB – MULTI-LANE AUTONOMOUS EMERGENCY BRAKING
DISC optional * Only available with Automated Manual Transmissions (AMT).
** Standard on 6x4 configurations only.
REAR SUSPENSION
KENWORTH AIRGLIDE 400 - 18.1t GAWR standard WHEELS
KENWORTH AIRGLIDE 460 - 20.9t GAWR optional ALCOA ALLOY 10 STUD standard
KENWORTH AIRGLIDE 460 WITH HENDRICKSON TOUGHLIFT FMT ALCOA ULTRA ONE ALLOY 10 STUD optional
optional ALCOA PACCAR / KENWORTH STYLE ALLOY 10 STUD optional
- 22.5t GAWR
KENWORTH AIRGLIDE 600 - 27.0t GAWR optional
KENWORTH AIRGLIDE 690 - 31.35t GAWR optional
FUEL TANKS
ROUND 725MM DIAMETER ALUMINIUM POLISHED TANKS standard
KENWORTH KW6-60A - 18.5t OR 21t GAWR optional
ROUND 625MM DIAMETER ALUMINIUM POLISHED TANKS optional
NEWAY AD246/10 - 20.8t GAWR optional
ROUND 625MM DIAMETER STEEL PAINTED TANKS optional
NEWAY AD260/10 - 27.2t GAWR optional
RECTANGULAR ALUMINIUM POLISHED TANKS optional
NEWAY AD369/10 - 31.2t GAWR optional
NEWAY AD378/10 - 35.3t GAWR optional PAINT
HENDRICKSON PAX 462 - 21.0t GAWR optional SINGLE COLOUR TO CAB standard
UP TO 3 COLOURS 6 BREAKS optional

Australian Kenworths are purpose-built.

Each truck is designed and manufactured for
its intended task and to individual customer
requirements. For a wide range of customised
options contact your local Kenworth Dealer
or go to www.kenworth.com.au

PACCAR Australia Pty Ltd

K220 SP 0722

64 Canterbury Road
Bayswater Victoria 3153
Phone (03) 9721 1500