Wpa1210a20 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Horizontal Pump

12/10 AH-WRT™
CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (International Test Standard ISO9906:1999 - Grade 2 unless otherwise specified). For media other than water,
corrections must be made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame
suitability must be checked for each duty and drive arrangement. Not all frame alternatives are necessarily available from each manufacturing centre.
150 USE WITH THROATBUSH G10083WRT1
Pump
Discharge 254mm
Suction 305mm
Impeller
Vanes 4
Vane ø 776mm
125 Type Closed
Part No Material
FAM10145WRT1 Metal
G10145WRT1 Metal
Frame (Rating - KW)
F 260
100 FFX 425
FF 425
STX 560
900 rpm 40% 50% ST 560
60%
Head, H (m)

G 600
70%
74% GG 900
75 77% T 1200
78%
800 rpm Seal
77%
Gland Sealed Pump
Y

74%
Hr
IEN C

NPS

700 rpm
C

Liner (Norm Max r/min)


EF FI

50
Polymer 700
Metal 900
600 rpm Min Passage Size
98mm
5m

500 rpm Curve


25
Revision 1
4m

400 rpm Reference


3m

ARTARMON TEST No 97a, 97b, 97c


300 rpm Issued Mar 14
2m

© 1/2024 Weir Minerals Australia (PTC)


All Rights Reserved
1000 2000 3000 TYPICAL PUMP PERFORMANCE CURVE

Flow Rate, Q (m³/hr) WPA1210A20/1

You might also like