The document describes the OPTA2 option board for VACON NX AC drives. The OPTA2 board contains two relay outputs with normally closed, common, and normally open terminals. It can be installed in slot B and has no jumpers or additional parameters. The board provides two sets of relay output terminals that can each switch 24VDC/8A, 250VAC/8A, or 125VDC/0.4A loads.
The document describes the OPTA2 option board for VACON NX AC drives. The OPTA2 board contains two relay outputs with normally closed, common, and normally open terminals. It can be installed in slot B and has no jumpers or additional parameters. The board provides two sets of relay output terminals that can each switch 24VDC/8A, 250VAC/8A, or 125VDC/0.4A loads.
The document describes the OPTA2 option board for VACON NX AC drives. The OPTA2 board contains two relay outputs with normally closed, common, and normally open terminals. It can be installed in slot B and has no jumpers or additional parameters. The board provides two sets of relay output terminals that can each switch 24VDC/8A, 250VAC/8A, or 125VDC/0.4A loads.
The document describes the OPTA2 option board for VACON NX AC drives. The OPTA2 board contains two relay outputs with normally closed, common, and normally open terminals. It can be installed in slot B and has no jumpers or additional parameters. The board provides two sets of relay output terminals that can each switch 24VDC/8A, 250VAC/8A, or 125VDC/0.4A loads.
Description: Standard VACON® NX AC drive relay board with two relay outputs Allowed slots: B Type ID: 16690 Terminals: Two terminal blocks; Screw terminals (M3); No coding Jumpers: None Board parameters: None
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
3 vacon • 22 Descriptions of VACON® option boards
I/O terminals on OPTA2
Table 7. OPTA2 I/O terminals
Parameter reference Terminal Technical information on keypad and NCDrive Relay output 1 (NO/NC) 21 RO1/normal closed Switching capacity 24VDC/8A 22 RO1/common DigOUT:B.1 250VAC/8A 23 RO1/normal open 125VDC/0.4A Min. switching load 5V/10mA Relay output 2 (NO/NC) 24 RO2/normal closed Switching capacity 24VDC/8A 25 RO2/common DigOUT:B.2 250VAC/8A 26 RO2/normal open 125VDC/0.4A Min. switching load 5V/10mA
3.1.3 OPTA3
7245.emf
Description: Relay board with two relay outputs and one thermistor input for VACON® NX AC drive Allowed slots: B Type ID: 16691 Terminals: Three terminal blocks; Screw terminals (M3); No coding. Jumpers: None Board parameters: None
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
