Table D250-4/E

Pressure switches type MAP

with fixed switching pressure differential and microswitch with gold plated contacts

MAP are hydro-electric pressure switches

with fixed switching pressure differential.
The mechanical microswitch with gold
plated contacts grants high reliability and
long life service.
The microswitch changes its status when
the pressure in the hydraulic circuit rea-
ches the switching value set on the adju-
sting knob.The microswitch returns to the
original rest position when the pressure in
the hydraulic circuit drops below the
nominal fixed switching pressure differen-
햲 Servo-piston tial (hysteresis). The electric connector
provides both NC or NO contacts.
햳 Spring
The pressure in the circuit operates the
햴 Microswitch with gold plated piston 햲 acting against the adjustable
contacts spring 햳 ; once the pressure setting is
햵 Adjusting knob with graduated reached, the piston 햷 actuates the
scale microswitch 햴.
햶 Body The pressure switching value is selecta-
햷 Switch actuator ble by a graduated adjusting knob 햵.
햸 Adjusting knob locking srew Clockwise rotation increases the setting
햹 Electric connector type 664 pressure.
(included in the supply) Max pressure: 630 bar

1 MODEL CODE

MAP - 160 / E ** / *
Seals material, see section 2:
Fixed differential pressure switch - = NBR
PE = FKM
Pressure range: Series number BT = HNBR
160 = 10 ÷ 160 bar
40 = 5 ÷ 40 bar 320 = 30 ÷ 320 bar Options:
80 = 7÷ 80 bar 630 = 50 ÷ 630 bar E = Common electric contact connected to pin 1, see section 3

2 MAIN CHARACTERISTICS, SEALS AND HYDRAULIC FLUID - for other fluids not included in below table, consult our technical office

Assembly position / location Any position

Subplate surface finishing Roughness index Ra 0,4 - flatness ratio 0,01/100 (ISO 1101)
CE to Low Voltage Directive 2014/35/EU
Compliance RoHS Directive 2011/65/EU as last update by 2015/65/EU
REACH Regulation (EC) n°1907/2006
Ambient temperature Standard = -30°C ÷ +70°C /PE option = -20°C ÷ +70°C /BT option = -40°C ÷ +70°C
NBR seals (standard) = -20°C ÷ +60°C, with HFC hydraulic fluids = -20°C ÷ +50°C
Seals, recommended fluid temperature FKM seals (/PE option)= -20°C ÷ +80°C
HNBR seals (/BT option)= -40°C ÷ +60°C, with HFC hydraulic fluids = -40°C ÷ +50°C
Recommended viscosity 15÷100 mm2/s - max allowed range 2.8 ÷ 500 mm2/s
Fluid contamination class ISO 4406 class 21/19/16 NAS 1638 class 10, in line filters of 25 μm (β25 >
_ 75 recommended)
Hydraulic fluid Suitable seals type Classification Ref. Standard
Mineral oils NBR, FKM, HNBR HL, HLP, HLPD, HVLP, HVLPD DIN 51524
Flame resistant without water FKM HFDU, HFDR
ISO 12922
Flame resistant with water NBR, HNBR HFC

3 CHARACTERISTICS AND WIRING OF INTERNAL MICROSWITCH

Supply voltage [V] Rest position Pressure operated position
125 AC 250 AC 30 DC 250 DC
Max current [A] 7 5 5 0,2 STD
resistive load
Max current [A]
inductive load (Cos ϕ = 0,4) 4 2 3 0,02
Insulating resistance ≥100MΩ
Contact resistance 15 mΩ
/E
Electrical life-expectancy ≥1.000.000 switchings
Mechanical life-expectancy ≥10.000.000 switchings

D250
 4 DIAGRAMS
MAP*/40 MAP*/80 MAP*/160
20 20 20
Hysteresis range Hysteresis range Hysteresis range
Switching pressure

Switching pressure

Switching pressure
differential [bar] 16 16 16

differential [bar]

differential [bar]
12 12 12

8 8 8

4 4 4

0 10 20 30 40 50 0 20 40 60 80 100 0 40 80 120 160 200

Switching pressure [bar] Switching pressure [bar] Switching pressure [bar]
MAP*/320 MAP*/630
The diagrams show, the switching
Hysteresis range Hysteresis range
pressure difference (hysteresis)

Switching pressure
Switching pressure

differential [bar]
differential [bar]

between the switching positions of the

pressure switch electric contacts.

The switching pressure differential may

increased depending to the deteriora-
tion of the fluid contamination class.

Switching pressure [bar] Switching pressure [bar]

5 DIMENSIONS OF MAP WITHOUT ADAPTORS [mm]

through

OR-2021/70

Fastening bolts:
4 socket head screws M5X90 supplied with the pressure switch

6 MODEL CODE FOR ADAPTORS WHEN SUPPLIED SEPARATELY - BHM and BKM with option /PE or /BT are available on request

BHM – **
Type of adaptor Threated connections for BMM and BFM adaptors, see section 7 BHM and BKM adaptors, see section 7
BMM = male
BMF = female
BFM = in-line 06 = G 1/4" (BMM, BMF, BFM) 20 = G 3/4" (BFM) 11 = port P 14 = port B
BHM = ISO 4401 size 06 10 = G 3/8" (BMM, BFM) 25 = G 1" (BFM) 12 = port A and B 17 = port P and A
BKM = ISO 4401 size 10 15 = G 1/2" (BMM, BFM) 32 = G 1 1/4"(BFM) 13 = port A 18 = port P and B

7 DIMENSIONS OF ADAPTORS [mm]

BMM - Male fittings: BFM - In-line mounting:

Weight: 0,3 Kg
BMF - Female fittings:

Weight: 0,8 Kg
A B ØD E F G H
BFM-06 50 20 19 G 1/4" 22,5 1 12
BFM-10 50 20 23 G 3/8" 22,5 1 12
BFM-15 50 20 27 G 1/2" 22,5 1 15
A B C ØD E F BFM-20 50 20 33 G 3/4" 22,5 1,5 17
BMM-06 22,5 11 1,5 18 G 1/4" 20
BMM-10 23,5 11,5 2 22 G 3/8" 20 BFM-25 70 30 40 G 1" 30 1,5 19
BMM-15 27,5 15 2,5 26 G 1/2" 20 BFM-32 70 30 50 G 1 1/4" 30 1,5 22

BHM - Modular mounting surface ISO 4401-03-02-0-05 BKM - Modular mounting surface ISO 4401-05-03-0-05

Weight: 1,2 Kg Weight: 2 Kg

For versions 11 and 13 the pressure switch is mounted on side of port A. For version 14 the pressure switch is mounted on side of port B. For versions 12, 17,
18 the pressure switch is mounted on both sides.

11/19