Scribd
Upload
119 views5 pages

MIT3 091SCF09 hw13 Sol

This document summarizes the solutions to 6 homework problems related to semiconductor materials and band structure. Problem 1 shows that green light can excite electrons in silicon. Problem 2 calculates the wavelength of photons emitted by germanium when illuminated by a specific frequency. Problem 3 explains the conductivity of potassium and beryllium based on their band structures. Problem 4 determines that a material appearing red is a semiconductor and calculates its band gap. Problem 5 draws the band structure of a transparent material. Problem 6 draws the band diagram and calculates the band gap of a material with an optical edge at a given frequency.

Uploaded by

kasemelk1990
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views5 pages

MIT3 091SCF09 hw13 Sol

This document summarizes the solutions to 6 homework problems related to semiconductor materials and band structure. Problem 1 shows that green light can excite electrons in silicon. Problem 2 calculates the wavelength of photons emitted by germanium when illuminated by a specific frequency. Problem 3 explains the conductivity of potassium and beryllium based on their band structures. Problem 4 determines that a material appearing red is a semiconductor and calculates its band gap. Problem 5 draws the band structure of a transparent material. Problem 6 draws the band diagram and calculates the band gap of a material with an optical edge at a given frequency.

Uploaded by

kasemelk1990
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Session #13: Homework Solutions

Problem #1

Show that green light (λ = 5 x 10-7 m) can excite electrons across the band gap of
silicon (Si).

Solution
hc 6.62 × 10-34 × 3 × 108
λcrit = = = 1.13 × 10-6 m
Eg 1.1 × 1.6 × 10-19

The critical λ for silicon is 1.1 x 10-6 m; thus radiation of λ = 5 x 10-7 m = 0.5 x10-6
m has even more energy than that required to promote electrons across the band
gap.

Problem #2

(a) Electromagnetic radiation of frequency 3.091 x 1014 Hz illuminates a crystal of


germanium (Ge). Calculate the wavelength photoemission generated by this
interaction. Germanium is an elemental semiconductor with a band gap, Eg, of 0.7 eV.

(b) Sketch the absorption spectrum of germanium, i.e., plot % absorption vs.
wavelength, λ.

Solution

(a) First compare E of the incident photon with Eg:

Eincident = hν = 6.6 × 10-34 × 3.091 × 1014 = 2.04 × 10-19 J

Eg = 0.7 eV = 1.12 × 10-19 J < Eincident

∴ electron promotion is followed by emission of a new photon of energy equal to Eg,


and energy in excess of Eg is dissipated as heat in the crystal

hc 6.6 × 10-34 × 3 × 108


λemitted = = = 1.77 × 10-6 m
Eg -19
0.7 × 1.6 × 10
(b)

λedge = λemitted as calculated in part (a) = 1.77 μm

Problem #3

Potassium (K) and beryllium (Be) are metals which exhibit good electrical
conductivity. Explain for both elements the reasons for the observed conductivity on
the basis of the band structure.

Solution

E
•
• } 3d band empty

•
4s band half filled
•
E diagram for K dist.

E
•
•• } 2p overlapping

} 2s filled

•
dist.
E diagram for Be

In K, each atom contributes one electron and one orbital to the conduction band (4s
band). According to the Pauli exclusion principle, each “molecular orbital” formed in
the band (energy state) can accommodate two electrons. As a consequence, the
conduction band is only half–filled with electrons – which provides for electrical
conduction.
In Be, each atom contributes two electrons and one orbital to the conduction band
(2s band). With two electrons per orbital (from each atom) the 2s conduction band is
filled. The observed electrical conductivity is due to the overlapping 2p band, which
is empty and thus provides empty energy states required for electronic conduction.

Problem #4

A pure crystalline material (no impurities or dopants are present) appears red in
transmitted light.

(a) Is this material a conductor, semiconductor or insulator? Give the reasons for your
answer.

(b) What is the approximate band gap (Eg) for this material in eV?

Solution

“White light” contains radiation in wavelength ranging from about 4000 Å (violet) to
7000 Å (deep red). A material appearing red in transmission has the following
absorption characteristics:

(a) If the material is pure (no impurity states present), then it must be classified as a
semiconductor since it exhibits a finite “band gap” – i.e. to activate charge carriers,
photons with energies in excess of “red” radiation are required.

(b) Taking λ = 6500 Å as the optical absorption edge for this material, we have:

hc 1 eV
E= = 3.05 × 10-29 J × = 1.9 eV
λ 1.6 × 10-19 J

Accordingly, the band gap for the material is Eg = 1.9 eV.

Problem #5

An unknown material is transparent to light of frequencies ( ν ) up to 1.3 x 1014 s–1.


Draw a meaningful schematic band structure for this material.
Solution

Since E = hν, we find the material to be transparent to photons with energies less
than:

1 eV
(6.63 × 10-34 J ⋅ s) × (1.3 × 1014 s-1 ) × = 0.54 eV
1.6 × 10-19 J

This constitutes the absorption edge, i.e. the energy band gap.

E
conduction band

Eg = 0.54 eV

valence band

Problem #6

A material exhibits an “optical band edge” (transition from absorption of light to


transmission) at ν = 5 x 1014 Hz (s–1).

(a) Draw a diagram which reflects the indicated optical behavior.

(b) What do you expect the color of this material to be when viewed in daylight?

(c) What is the band gap (Eg) of this material?

Solution
c 3 × 108 m/s
(a) λ = = = 6 × 10-7 m = 600 nm
ν 5 × 1014 s−1

(b) The color will be orange or “reddish”.

(c) Eg = Ephoton = hν = 6.63 × 10-34 J ⋅ s × 5 × 1014 Hz


1 eV
= 3.315 × 10−19 J × = 2.07 eV
1.6 × 10-19 J
MIT OpenCourseWare
http://ocw.mit.edu

3.091SC Introduction to Solid State Chemistry


Fall 2009

For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.

You might also like