Scribd
Upload
281 views3 pages

CCNA Interview

The document contains 15 multiple choice questions about networking concepts related to the OSI model, router configuration, and TCP/IP protocols. Some key points covered are: - The application and presentation layers are responsible for file retrieval and data formatting/conversion. - The data link layer of the OSI model is subdivided into the MAC and LLC layers. - Routers can be configured using the console port, TFTP server, or privileged EXEC mode. - The transport layer provides flow control, sliding windows, and reliability with sequence numbers and acknowledgments. - Distance vector routing protocols like RIP use hop counts to routes packets.

Uploaded by

api-3747051
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
281 views3 pages

CCNA Interview

The document contains 15 multiple choice questions about networking concepts related to the OSI model, router configuration, and TCP/IP protocols. Some key points covered are: - The application and presentation layers are responsible for file retrieval and data formatting/conversion. - The data link layer of the OSI model is subdivided into the MAC and LLC layers. - Routers can be configured using the console port, TFTP server, or privileged EXEC mode. - The transport layer provides flow control, sliding windows, and reliability with sequence numbers and acknowledgments. - Distance vector routing protocols like RIP use hop counts to routes packets.

Uploaded by

api-3747051
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

CCNA/Cisco admin interview questions

1. You need to retrieve a file from the file server for your word processing
application, which layer of the OSI model is responsible for this function?
1. Presentation layer
2. Application layer
3. Session layer
4. Transport layer
5. Datalink layer
2. You are working in a word processing program, which is run from the file
server. Your data comes back to you in an unintelligible manner. Which layer
of the OSI model would you investigate?
1. Application layer
2. Presentation layer
3. Session layer
4. Network layer
5. Datalink layer
3. The IEEE subdivided the datalink layer to provide for environments that
need connectionless or connection-oriented services. What are the two layers
called?
1. Physical
2. MAC
3. LLC
4. Session
5. IP
4. You are working with graphic translations. Which layer of the OSI model is
responsible for code formatting and conversion and graphic standards.
1. Network layer
2. Session layer
3. Transport layer
4. Presentation layer
5. Which is the best definition of encapsulation?
1. Each layer of the OSI model uses encryption to put the PDU from the
upper layer into its data field. It adds header and trailer information that is
available to its counterpart on the system that will receive it.
2. Data always needs to be tunneled to its destination so encapsulation must
be used.
3. Each layer of the OSI model uses compression to put the PDU from the
upper layer into its data field. It adds header and trailer information that is
available to its counterpart on the system that will receive it.
4. Each layer of the OSI model uses encapsulation to put the PDU from the
upper layer into its data field. It adds header and trailer information that is
available to its counterpart on the system that will receive it.
6. Routers can be configured using several sources. Select which of the
following sources can be used.
1. Console Port
2. Virtual Terminals
3. TFTP Server
4. Floppy disk
5. Removable media
7. Which memory component on a Cisco router contains the dynamic system
configuration?
1. ROM
2. NVRAM
3. Flash
4. RAM/DRAM
8. Which combination of keys will allow you to view the previous commands
that you typed at the router?
1. ESC-P
2. Ctrl-P
3. Shift-P
4. Alt-P
9. Which commands will display the active configuration parameters?
1. show running-config
2. write term
3. show version
4. display term
10. You are configuring a router, which prompt tells you that you are in the
privileged EXEC mode?
1. @
2. >
3. !
4. :
5. #
11. What does the command “IP name-server 255.255.255.255″ accomplish?
1. It disables domain name lookup.
2. It sets the domain name lookup to be a local broadcast.
3. This is an illegal command.
4. The command is now defunct and has been replaced by “IP server-name ip
any”
12. The following selections show the command prompt and the configuration of
the IP network mask. Which two are correct?
1. Router(config-if)#netmask-format { bitcount | decimal | hexadecimal }
2. Router#term IP netmask-format { bitcount | decimal | hexadecimal }
3. Router(config-if)#IP netmask-format { bitcount | decimal | hexadecimal }
4. Router#ip netmask-format { bitcount | decimal | hexadecimal }
13. Which layer is responsible for flow control with sliding windows and
reliability with sequence numbers and acknowledgments?
1. Transport
2. Application
3. Internet
4. Network Interface
14. Which processes does TCP, but not UDP, use?
1. Windowing
2. Acknowledgements
3. Source Port
4. Destination Port
15. Select which protocols use distance vector routing?
1. OSPF
2. RIP
3. IGRP
4. PPP

You might also like