FENDERS

FENDERS

PNEUMATIC FENDER WITH CHAIN HARNESS

PNEUMATIC SLING TYPE FENDER

103
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

SHIP-TO-SHIP APPLICATIONS
INSTALLATION EXAMPLES
Four large-size fenders are usually floated at the water line as primary fenders to absorb impact energy at berthing
and keep proper stand-off distance between two ships. Two small-size fenders (secondary fenders) are hung high
on the hull at both bow and stern of smaller ship to prevent contact from rolling of ships due to swell and wind. “STS
Transfer Guide,” published by the International Chamber of Shipping is a good reference for further information.

Small Size Fender

Tanker

Guy Rope

Pneumatic Rubber Fender

(a) Fenders Rigged in a Continuous String

Small Size Fender

Guy Rope

Pneumatic Rubber Fender

(b) Fenders Guyed Individually

Installation Method in case of Ship-to-Ship Transfer Operations.

Actual Installation Method in case of Ship-to-Ship Transfer Operations.

104
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
SHIP-TO-JETTY APPLICATIONS
INSTALLATION METHODS

(a) Dolphin

H.W.L

At both ends of the fender, first

shackles, then swivel joints,
followed by a further shackle
should be installed. A guy chain or
guy rope is secured to the outer L.W.L
shackle. The swivel joint prevents
twisting of the guy chain or wire.

Anchor
Shackle
End Link

Guy Chain

Rubber Sleeve End Link

Shackle
Swivel Joint
First Shackle
Towing Ring
Floating-Type (b) Continuous Quay
Pneumatic
Rubber Fender

H.W.L

Installation Methods
for Ship-to-Jetty
L.W.L Applications.

105
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
PNEUMATIC 50 (U.S. CUSTOMARY)
PNEUMATIC 50 STANDARD SIZES
GUARANTEED WEIGHT OF NET TYPE (TYPE I)
REACTION HULL
ENERGY
NOMINAL SIZE FORCE AT PRESSURE
ABSORPTION SAFETY WEIGHT OF
INITIAL GEA AT GEA
(GEA) VALUE TESTING APPROXIMATE WEIGHT SLING TYPE
INTERNAL APPROX.
SETTING PRESSURE OF NET (TYPE
PRESSURE FENDER
PRESSURE II)
BODY CHAIN SYNTHETIC
DIAMETER X LENGTH E R P WEIGHT WIRE NET
NET FIBER NET

(FT X FT) (MM X MM) (KIPS) (KIPS) (KIPS) (KIPS/FT 2) (PSI) (PSI) (LBS) (LBS) (LBS) (LBS) (LBS)

1.6 x 3 500 x 1000 7.3 4.4 14.4 2.72 - 29.0 49 243 66 44 71

2x3 600 x 1000 7.3 5.9 16.7 2.59 - 29.0 55 265 66 49 79
2.3 x 5 700 x 1500 7.3 12.5 30.8 2.78 - 29.0 99 331 88 82 121
3x5 1000 x 1500 7.3 23.6 41.0 2.51 - 29.0 161 441 176 112 216
3 x 6.5 1000 x 2000 7.3 33.2 57.8 2.72 - 29.0 194 485 309 126 249
4 x 6.5 1200 x 2000 7.3 46.5 66.8 2.59 - 29.0 289 706 419 150 344
4.4 x 8 1350 x 2500 7.3 75.3 96.1 2.67 - 29.0 441 772 441 - 529
5 x 10 1500 x 3000 7.3 113.0 130.0 2.72 - 29.0 551 1169 772 - 639
5.6 x 10 1700 x 3000 7.3 141.0 144.0 2.63 - 29.0 639 1279 970 - 728
6.5 x 11.5 2000 x 3500 7.3 227.0 197.0 2.63 - 29.0 893 2117 1411 - 1025
8 x 13 2500 x 4000 7.3 489.0 311.0 2.82 25.4 36.3 1989 2734 2007 - 2381
8 x 18 2500 x 5500 7.3 696.0 454.0 3.04 25.4 36.3 2403 4079 2558 - 2911
11 x 15 3300 x 4500 7.3 867.0 424.0 2.67 25.4 36.3 3219 3771 2800 - 4057
11 x 21 3300 x 6500 7.3 1339.0 678.0 3.00 25.4 36.3 4123 5667 4212 - 4961
11 x 35 3300 x 10600 7.3 2264.0 1183.0 3.25 25.4 36.3 5645 10275 7277 - 6747
15 x 30 4500 x 9000 7.3 3507.0 1293.0 3.00 25.4 36.3 8688 11885 7762 - -
15 x 40 4500 x 12000 7.3 4777.0 1796.0 3.17 25.4 36.3 10562 15413 11444 - -

PNEUMATIC 50 POPULAR NON STANDARD SIZES

WEIGHT OF NET TYPE (TYPE I)
GUARANTEED
REACTION HULL
ENERGY
NOMINAL SIZE FORCE AT PRESSURE AT
ABSORPTION APPROXIMATE WEIGHT
GEA GEA SAFETY
INITIAL (GEA) WEIGHT OF NET OF SLING
VALUE TESTING APPROX.
INTERNAL TYPE
SETTING PRESSURE FENDER
PRESSURE (TYPE
PRESSURE BODY
II)
WEIGHT CHAIN WIRE SYNTHETIC
DIAMETER X LENGTH E R P
NET NET FIBER NET

(FT X FT) (MM X MM) (KIPS) (KIPS) (KIPS) (KIPS/FT 2) (PSI) (PSI) (LBS) (LBS) (LBS) (LBS) (LBS)

1.3 x 5 400 x 1500 7.3 4.4 19.6 3.11 - 29.0 51 - - - 73

2x4 600 x 1200 7.3 7.4 20.9 2.72 - 29.0 62 - - - 86
2.6 x 4 800 x 1200 7.3 11.8 26.1 2.51 - 29.0 107 529 - - 128
4x6 1200 x 1800 7.3 40.6 59.0 2.51 - 29.0 271 684 - - 326
4.4 x 11.5 1350 x 3500 7.3 112.0 144.0 2.90 - 29.0 562 1323 - - 650
5x8 1500 x 2500 7.3 90.8 104.0 2.59 - 29.0 487 970 - - 576
6.5 x 10 2000 x 3000 7.3 188.0 164.0 2.51 - 29.0 809 1985 - - 942
6.5 x 15 2000 x 4500 7.3 309.0 267.0 2.82 - 29.0 1058 2646 - - 1191
8 x 25 2500 x 7700 7.3 996.0 664.0 3.23 25.4 36.3 3021 6659 - - 3528
11 x 28 3300 x 8600 7.3 1803.0 931.0 3.17 25.4 36.3 4895 8181 - - 5998
15 x 21 4500 x 6400 7.3 2390.0 854.0 2.74 25.4 36.3 7497 8600 - - -

106
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
PNEUMATIC 80 (U.S. CUSTOMARY)
PNEUMATIC 80 STANDARD SIZES
GUA- WEIGHT OF NET TYPE (TYPE I)
RANTEED
REACTION HULL WEIGHT
ENERGY
NOMINAL SIZE FORCE AT PRESSURE SAFETY APPROXIMATE WEIGHT OF
INITIAL ABSORP-
GEA AT GEA VALUE TESTING APPROX. OF NET SLING
INTERNAL TION
SETTING PRESSURE FENDER TYPE
PRESSURE (GEA) BODY
PRESSURE (TYPE
WEIGHT SYNTHE- II)
CHAIN
DIAMETER X LENGTH E R P WIRE NET TIC FIBER
NET
NET
(FT X FT) (MM X MM) (KIPS) (KIPS) (KIPS) (KIPS/FT2) (PSI) (PSI) (LBS) (LBS) (LBS) (LBS) (LBS)
1.6 x 3 500 x 1000 11.6 5.9 19.1 3.58 - 36.3 53 243 66 44 75
2x3 600 x 1000 11.6 8.1 22.1 3.41 - 36.3 60 265 66 49 84
2.3 x 5 700 x 1500 11.6 17.7 40.5 3.64 - 36.3 104 331 88 82 126
3x5 1000 x 1500 11.6 33.2 53.8 3.29 - 36.3 168 441 176 112 223
3 x 6.5 1000 x 2000 11.6 46.5 76.1 3.58 - 36.3 203 485 309 126 258
4 x 6.5 1200 x 2000 11.6 64.9 87.8 3.41 - 36.3 298 706 419 150 353
4.4 x 8 1350 x 2500 11.6 105.0 126.0 3.50 - 36.3 452 772 441 - 540
5 x 10 1500 x 3000 11.6 158.0 171.0 3.58 - 36.3 611 1169 772 - 699
5.6 x 10 1700 x 3000 11.6 197.0 189.0 3.46 - 36.3 697 1279 970 - 785
6.5 x 11.5 2000 x 3500 11.6 317.0 259.0 3.46 - 36.3 911 2139 1521 - 1043
8 x 13 2500 x 4000 11.6 683.0 408.0 3.70 33.4 43.5 2227 2756 2007 - 2624
8 x 18 2500 x 5500 11.6 972.0 597.0 4.01 33.4 43.5 2712 4101 2580 - 3219
11 x 15 3300 x 4500 11.6 1210.0 557.0 3.52 33.4 43.5 3793 3793 2822 - 4608
11 x 21 3300 x 6500 11.6 1869.0 891.0 3.93 33.4 43.5 4851 5689 4388 - 5667
11 x 35 3300 x 10600 11.6 3160.0 1554.0 4.28 33.4 43.5 6681 10275 7277 - 7762
15 x 30 4500 x 9000 11.6 4896.0 1699.0 3.95 33.4 43.5 9658 11995 7894 - -
15 x 40 4500 x 12000 11.6 6670.0 2360.0 4.16 33.4 43.5 11753 15501 11532 - -

PNEUMATIC 80 POPULAR NON STANDARD SIZES

GUARANTEED WEIGHT OF NET TYPE (TYPE I)
REACTION HULL
ENERGY
NOMINAL SIZE FORCE AT PRESSURE SAFETY APPROXIMATE WEIGHT WEIGHT
INITIAL ABSORPTION
GEA AT GEA APPROX. OF NET
(GEA) VALUE TESTING OF SLING
INTERNAL FENDER
SETTING PRESSURE TYPE
PRESSURE BODY
PRESSURE CHAIN SYNTHETIC (TYPE II)
DIAMETER X LENGTH E R P WEIGHT WIRE NET
NET FIBER NET

(FT X FT) (MM X MM) (KIPS) (KIPS) (KIPS) (KIPS/FT2) (PSI) (PSI) (LBS) (LBS) (LBS) (LBS) (LBS)
1.3 x 5 400 x 1500 11.6 6.6 25.7 4.09 - 36.3 53 - - - 75
2x4 600 x 1200 11.6 10.3 27.5 3.58 - 36.3 66 - - - 90
2.6 x 4 800 x 1200 11.6 17.0 34.4 3.29 - 36.3 110 529 - - 132
4x6 1200 x 1800 11.6 56.8 77.4 3.29 - 36.3 280 684 - - 335
4.4 x 11.5 1350 x 3500 11.6 157.0 189.0 3.81 - 36.3 576 1323 - - 664
5x8 1500 x 2500 11.6 126.0 137.0 3.41 - 36.3 538 970 - - 626
6.5 x 10 2000 x 3000 11.6 263.0 215.0 3.29 - 36.3 827 1985 - - 959
6.5 x 15 2000 x 4500 11.6 431.0 351.0 3.68 - 36.3 1076 2668 - - 1208
8 x 25 2500 x 7700 11.6 1391.0 872.0 4.24 33.4 43.5 3418 6681 - - 3925
11 x 28 3300 x 8600 11.6 2517.0 1223.0 4.16 33.4 43.5 5777 8181 - - 6858
15 x 21 4500 x 6400 11.6 3335.0 1122.0 3.58 33.4 43.5 8291 8622 - - -

107
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
SIZES AND PERFORMANCES
The Pneumatic Rubber Fenders are available Ø4500 x 9000L - P80
in the following sizes, which are generally Pneumatic Rubber Fender
expressed in terms of diameter by length.

4500 x 12000 (15’ x 40’)

4500 x 9000 (15’ x 30’)

3300 x 10600 (11’ x 35’)

3300 x 6500 (11’ x 21’)
3300 x 4500 (11’ x 15’)

2500 x 5500 (8’ x 18’)

2500 x 4000 (8’ x 13’)

2000 x 3500 (7’ x 12’)

1700 x 3000 (5’-7’’ x 10’)

500 x 1000 (1’-8’’ x 3’)

600 x 1000 (2’ x 3’)
Standard Sizes of Pneumatic
Rubber Fender. 700 x 1500 (2’-4’’ x 5’)
1000 x 1500 (3’ x 5’)
1000 x 2000 (3’ x 7’)
1200 x 2000 (4’ x 7’)
1350 x 2500 (4’-5’’ x 8’)
1500 x 3000 (5’ x 10’)

Overall Length
Fender Body Length

Overall Fender Overall

Diameter Body Diameter
Diameter

108
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
FOAM FILLED FENDERS

OCEAN CUSHION

OCEAN GUARD

109
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
LOW MAINTENANCE
The design of the foam-filled Ocean Guard™ Netless Fender
is highly resistant to environmental hazards such as extreme
temperatures, hydrocarbons, fresh and salt water, ozone
and ultraviolet radiation. The fender skin is even resistant to
chemicals such as diesel fuels.
Additionally, since the internal construction consists of a solid
heat laminated foam core, there is no need to maintain air
pressure, inflation or relief values, as with pneumatic fenders.

INSTALLATION
Ocean Guard™ Netless Fenders are designed for easy
installation. Their buoyant construction allows the option
of a floating installation. The unique end fittings and ultra
heavy duty internal chain are also ideal for a fixed hanging
installation. Both installations can include a 2-point and
4-point mounting arrangement. Typical mounting hardware
includes dock plate padeyes, anchor bolts, shackles, swivels
and stud link chain.

floating 2-point mounting arrangement

110
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
URETHANE SKIN AND ENERGY ABSORBING FOAM
CONSTRUCTION CORE CONSTRUCTION

FEATURES Continuous filament

Outer wear surface of UV
Heat laminated
nylon tire cord polyethylene
FOAM CORE reinforcement in resistant urethane skin
Construction begins with a resilient energy absorbing foam core layers
urethane skin
closed cell cross-linked polyethylene foam core which
is heat laminated into one piece solid foam core. This
heat lamination process produces a thermal bond
between the layers of foam which is stronger than the
foam itself. It will not delaminate even under the most
abusive berthing conditions. This ensures that the foam
core construction of the fender will provide years of
quality service and performance.
Because of this foam core, if punctured the fender
will not experience a catastrophic failure as would
pneumatic fenders.
REINFORCED ELASTROMERIC SKIN
The energy absorbing foam core is protected by
a tough, thick filament nylon tire cord reinforced
elastomer skin. This non-marking reinforced elastomer
fender skin is the wear surface of the fender. The
reinforcing filaments are continuously wound in a helix
pattern through up to 90% of the elastomer skin, and
wrap around the fender swivel end fitting housings on
each end of the fender. This continuous reinforcement
of the elastomer skin not only increases the tensile and
tear strength of the elastomer but also distributes loads
through the fender skin.
Our elastomer skin exemplifies the latest in urethane
technology. This tough, resilient material is specially
formulated to withstand the world’s harshest
conditions, providing superior performance in
extreme temperatures, toxic environments, against
hydrocarbons, salt water, ozone, and ultraviolet
radiation. Its smooth, sleek construction is not prone to
snagging on dock or hull protrusions.
Continuous
Heat laminated filament nylon tire
polyethylene cord reinforcement
foam core layers in urethane skin
Heavy duty stud-
link chain internally
connecting swivel end
fittings

Integral swivel
end fittings

Outer wear surface

of UV resistant
urethane skin

111
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

OCEAN GUARD™ NETLESS

FENDERS LOW REACTION STANDARD CAPACITY HIGH CAPACITY EXTRA HIGH CAPACITY SUPER HIGH CAPACITY FENDER

SIZE SAFE
ENERGY REACTION ENERGY REACTION ENERGY REACTION ENERGY REACTION ENERGY REACTION WORKING
ENGLISH METRIC ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE END PULL
LOAD

FT- TON- FT- TON- FT- TON- FT - TON- FT - TON-

FT X FT MXM KIPS TONS KIPS TONS KIPS TONS KIPS TONS KIPS TONS KIPS KN
KIPS M KIPS M KIPS M KIPS M KIPS M

2x4 0.6 x 1.2 7 1 12 5 11 2 20 9 14 2 26 12 21 3 38 17 29 4 52 24 9.5 42

3x5 0.9 x 1.5 19 3 27 12 31 4 45 20 40 6 59 27 59 9 86 39 81 11 117 53 9.5 42
3x6 0.9 x 1.8 23 3 29 13 39 5 48 22 51 7 62 28 71 10 91 41 101 14 125 57 9.5 42
3x8 0.9 x 2.4 33 5 41 19 55 8 68 31 72 10 88 40 105 15 129 59 143 20 177 80 17.0 76
4x6 1.2x1.8 36 5 34 16 60 8 56 26 78 11 73 33 114 16 106 48 156 22 146 66 17.0 76
4x8 1.2 x 2.4 53 7 50 23 89 12 83 38 116 16 108 49 169 23 158 72 231 32 216 98 17.0 76
4 x 10 1.2 x 3.0 71 10 67 30 118 16 111 50 153 21 144 65 224 31 211 96 307 42 289 131 17.0 76
4 x 12 1.2 x 3.7 88 12 82 37 146 20 136 62 190 26 177 80 277 38 258 117 380 53 354 161 24.0 107
5x8 1.5 x 2.4 81 11 60 27 135 18 100 45 176 24 130 59 257 36 190 86 351 49 260 118 17.0 76
5 x 10 1.5 x 3.0 108 15 80 37 180 25 134 61 234 32 174 79 342 47 255 116 468 65 348 158 24.0 107
5 x 12 1.5 x 3.7 135 19 100 45 225 31 167 75 293 41 217 98 428 59 317 144 585 81 434 197 24.0 107
5 x 14 1.5 x 4.3 161 22 120 55 269 37 200 91 350 48 260 118 511 71 380 172 699 97 520 236 34.0 151
6 x 12 1.8 x 3.7 180 25 112 50 300 41 186 84 390 54 242 110 570 79 353 160 780 108 484 220 34.0 151
6 x 14 1.8 x 4.3 218 30 135 61 364 50 225 102 473 65 293 133 690 96 428 194 946 131 585 265 34.0 151
6 x 16 1.8 x 4.9 256 35 159 72 427 59 265 120 555 77 345 156 811 112 504 229 1110 154 689 313 50.0 222
7 x 14 2.1 x 4.3 292 40 155 70 487 67 259 117 633 88 337 153 925 128 482 223 1266 175 673 305 50.0 222
7 x 16 2.1 x 4.9 344 47 183 83 574 79 305 138 746 103 397 180 1091 151 580 263 1492 206 793 360 50.0 222
7 x 18 2.1 x 5.5 396 55 211 95 660 91 351 159 858 119 456 207 1254 173 667 303 1716 237 913 414 70.0 311
8 x 12 2.4 x 3.7 319 44 148 67 531 73 246 111 690 95 320 145 1008 139 468 212 1379 191 642 291 70.0 311
8 x 14 2.4 x 4.3 371 51 173 78 619 85 288 130 805 111 374 170 1176 163 547 248 1609 233 749 340 70.0 311
8 x 16 2.4 x 4.9 440 61 205 93 733 101 341 155 953 132 443 201 1393 193 648 294 1906 264 887 402 70.0 311
8 x 18 2.4 x 5.5 508 70 236 107 847 117 394 179 1101 152 512 232 1609 223 749 340 2202 305 1024 464 70.0 311
8 x 20 2.4 x 6.1 577 80 268 122 961 133 447 203 1249 173 581 264 1826 253 849 385 2499 346 1162 527 70.0 311
9 x 14 2.7 x 4.3 467 65 193 88 779 108 322 146 1012 140 418 190 1480 205 611 277 2025 280 837 380 70.0 311
9 x 16 2.7 x 4.9 534 74 221 100 890 123 368 167 1157 160 478 217 1691 234 688 317 2314 320 957 434 70.0 311
9 x 18 2.7 x 5.5 619 86 256 116 1032 143 427 194 1342 186 555 252 1961 271 811 368 2683 371 1110 503 70.0 311
10 x 16 3.0 x 4.9 649 90 241 109 1081 150 402 182 1405 194 523 237 2054 284 764 347 2811 389 1045 474 70.0 311
10 x 18 3.0 x 5.5 755 104 281 127 1258 174 468 212 1635 226 608 276 2390 331 889 403 3271 452 1217 552 70.0 311
10 x 20 3.0 x 6.1 861 119 320 145 1435 198 534 242 1866 258 694 315 2727 377 1015 460 3731 516 1388 630 110.0 489
10 x 24 3.0 x 7.3 1087 150 404 184 1811 250 674 306 2286 316 850 386 3341 462 1244 564 4572 632 1702 772 110.0 489
11 x 18 3.4 x 5.5 889 131 301 159 1482 219 501 265 1927 267 651 295 2816 389 952 432 3853 533 1303 591 110.0 489
11 x 20 3.4 x 6.1 1018 145 344 167 1696 241 573 279 2141 296 745 338 3223 446 1090 494 4410 610 1491 676 110.0 489
12 x 20 3.7 x 6.1 1298 179 425 193 2163 299 708 321 2812 389 920 417 4109 568 1346 611 5623 778 1841 835 110.0 489
13 x 26 4.0 x 7.9 1944 269 591 268 3240 448 985 447 4212 583 1281 581 6156 815 1872 849 8424 1165 2561 1162 110.0 489
14 x 28 4.3 x 8.5 2400 332 678 308 4000 553 1130 513 5200 719 1469 665 7600 1051 2147 974 10400 1438 2938 1333 110.0 489

Custom sizes and capacities available

* Actual values for above sizes may vary +/- 15% due to variations in materials, speed of
compression, temperatures and tolerances. Performance based on 60% compression.

112
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

OCEAN GUARD™ NETLESS

FENDERS LOW REACTION STANDARD CAPACITY HIGH CAPACITY FENDER PRESSURE AT 60% DEFLECTION
SIZE ENGLISH UNITS METRIC UNITS METRIC UNITS
ENERGY REACTION ENERGY REACTION ENERGY REACTION CAPACITY
KIPS/SQ FT TONS/SQ METER KN/SQ METER
METRIC ENGLISH ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE
Low Reaction 2.2 10.6 104
MXM FT X FT
FT- TON-
KIPS TONS
FT- TON-
KIPS TONS
FT- TON-
KIPS TONS Enhanced 2.9 14.1 138
KIPS M KIPS M KIPS M
Standard 3.6 17.6 172
0.7 x 1.5 2.3 x 4.9 11 2 18 8 19 3 30 14 25 3 39 18
Advanced 4.1 20.2 198
0.7 x 2.0 2.3 x 6.5 17 2 27 12 28 4 44 20 33 5 52 24
High Capacity 4.7 22.9 224
0.7 x 3.0 2.3 x 9.8 29 4 46 21 49 7 77 35 50 7 78 35
1.0 x 1.5 3.3 x 4.9 21 3 18 8 35 5 39 18 46 6 51 23 Advanced High 5.8 28.2 276
1.0 x 2.0 3.3 x 6.5 30 4 34 15 50 7 57 26 65 9 74 34 Extra High Capacity 6.8 33.4 327
1.0 x 3.0 3.3 x 9.8 53 7 58 26 89 12 97 44 75 10 86 74 Advanced Extra High 8.1 39.6 388
1.2 x 2.0 3.9 x 6.5 40 6 38 17 67 9 63 29 87 12 82 37 Super High Capacity 9.4 45.7 449
1.2 x 2.5 3.9 x 8.2 56 8 52 23 94 13 86 39 109 15 103 46 Advanced Super High 10.8 52.7 517
1.35 x 2.5 4.4 x 8.2 67 9 56 25 112 15 94 43 146 20 122 55 Ultra High 12.2 59.7 586
1.35 x 3.0 4.4 x 9.8 86 12 71 32 144 20 118 54 175 24 146 66
1.5 x 3.0 4.9 x 9.8 103 14 78 35 171 24 130 59 222 31 169 77 GENERIC PERFORMANCE CURVE
1.7 x 3.0 5.6 x 9.8 125 17 83 38 208 29 139 63 270 37 181 82 OCEAN GUARD FENDER
1.7 x 4.5 5.6 x 14.7 212 29 139 63 354 49 232 105 360 50 241 109 120%
2.0 x 3.5 6.5 x 11.5 201 28 114 52 335 46 190 86 436 60 247 112
2.0 x 4.0 6.5 x 13.1 239 33 136 62 398 55 226 103 517 72 294 133 100% 200%

ENERGY ABSORPTION
REACTION FORCE
2.0 x 4.5 6.5 x 14.7 276 38 157 71 460 64 261 118 598 83 339 154
80%
2.5 x 4.0 8.2 x 13.1 335 46 161 73 591 82 269 122 768 106 350 159 150%
2.5 x 4.5 8.2 x 16.4 398 55 181 82 663 92 301 137 1046 145 475 215
60%
2.5 x 5.5 8.2 x 18.0 531 73 241 109 885 122 402 182 1151 159 523 237
100%
3.0 x 4.9 9.8 x 16.0 633 88 239 108 1055 146 339 154 1372 190 519 235 40%
3.0 x 6.0 9.8 x 19.7 819 113 310 141 1365 189 516 234 1775 245 671 304
50%
3.0 x 7.0 9.8 x 23.0 973 135 367 166 1621 224 611 277 1923 266 727 330 20%
3.3 x 4.5 10.8 x 14.7 663 92 228 103 1105 153 380 172 1437 199 494 224
3.3 x 6.5 10.8 x 21.3 1072 148 368 167 1786 247 614 279 2322 321 798 362 0% 0%
3.3 x 8.5 10.8 x 27.9 1498 207 516 234 2496 345 860 390 2323 321 799 362 0% 10% 20% 30% 40% 50% 60%
3.3 x 10.6 10.8 x 34.8 1909 264 656 298 3181 440 1094 496 4135 572 1422 645 PERCENT COMPRESSION REACTION ENERGY

FENDERS EXTRA HIGH CAPACITY SUPER HIGH CAPACITY ULTRA HIGH CAPACITY FENDER

SIZE SAFE
ENERGY REACTION ENERGY REACTION ENERGY REACTION
WORKING END
ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE
METRIC ENGLISH PULL LOAD
FT- TON- FT- TON- FT- TON-
MXM FT X FT KIPS TONS KIPS TONS KIPS TONS KIPS KN
KIPS M KIPS M KIPS M
0.7 x 1.5 2.3 x 4.9 36 5 57 26 49 7 78 35 65 9 102 46 10 42
0.7 x 2.0 2.3 x 6.5 48 7 76 34 65 9 104 47 96 13 151 68 10 42
0.7 x 3.0 2.3 x 9.8 72 10 114 52 98 14 156 71 167 23 261 118 10 42
1.0 x 1.5 3.3 x 4.9 67 9 74 34 91 13 123 56 119 16 133 60 10 42
1.0 x 2.0 3.3 x 6.5 95 13 108 49 130 18 148 67 170 24 194 88 10 42
1.0 x 3.0 3.3 x 9.8 75 10 86 39 75 10 86 39 303 42 330 150 10 42
1.2 x 2.0 3.9 x 6.5 127 18 120 54 174 24 164 74 228 32 214 97 17 76
1.2 x 2.5 3.9 x 8.2 159 22 150 68 218 30 205 93 320 44 292 133 17 76
1.35 x 2.5 4.4 x 8.2 213 29 179 81 291 40 244 111 381 53 320 145 17 76
1.35 x 3.0 4.4 x 9.8 256 35 215 97 349 48 293 133 490 68 401 182 17 76
1.5 x 3.0 4.9 x 9.8 325 45 247 112 445 62 338 153 581 80 442 200 24 107
1.7 x 3.0 5.6 x 9.8 395 55 264 120 541 75 361 164 707 98 473 214 24 107
1.7 x 4.5 5.6 x 14.7 527 73 352 160 721 100 481 218 1204 166 789 358 24 107
2.0 x 3.5 6.5 x 11.5 637 88 361 164 871 120 494 224 1139 158 646 293 34 151
2.0 x 4.0 6.5 x 13.1 756 105 429 195 1035 143 588 267 1353 187 768 349 34 151
2.0 x 4.5 6.5 x 14.7 874 121 496 225 1196 165 679 308 1564 216 887 403 50 222
2.5 x 4.0 8.2 x 13.1 1123 155 511 232 1573 213 699 317 2009 278 915 415 70 311
2.5 x 4.5 8.2 x 16.4 1529 211 694 315 2091 289 950 431 2254 312 1023 464 70 311
2.5 x 5.5 8.2 x 18.0 1682 233 764 347 2301 318 1045 474 3009 416 1367 620 70 311
3.0 x 4.9 9.8 x 16.0 2005 277 758 344 2743 379 1037 470 3587 496 1153 523 70 311
3.0 x 6.0 9.8 x 19.7 2594 359 980 445 3549 491 1342 609 4641 642 1754 796 110 489
3.0 x 7.0 9.8 x 23.0 2810 389 1062 482 3845 532 1454 659 5511 762 2077 942 110 489
3.3 x 4.5 10.8 x 14.7 2100 290 722 327 2873 397 988 448 3757 520 1292 586 110 489
3.3 x 6.5 10.8 x 21.3 3393 469 1167 529 4644 642 1596 724 6072 840 2088 947 110 489
3.3 x 8.5 10.8 x 27.9 3394 469 1168 530 4645 642 1597 724 8486 1174 2924 1326 110 489
3.3 x 10.6 10.8 x 34.8 6044 836 2079 943 8271 1144 2844 1290 10815 1496 3720 1687 110 489

* Actual values for above sizes may vary +/- 15% due to variations in materials, speed of
Custom sizes and capacities available
compression, temperatures and tolerances. Performance based on 60% compression.

113
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
OCEAN CUSHION™ STANDARD CAPACITY
FOAM FILLED FENDER
WITH CHAIN & AIRCRAFT TIRE NETS

ENGLISH SIZES

FENDERS STAND OFF STANDARD CAPACITY HIGH CAPACITY

SIZE DIAMETER ENERGY ENERGY
REACTION FORCE REACTION FORCE
UNCOMPRESSED ABSORPTION ABSORPTION
ENGLISH METRIC

FT X FT MXM FT M FT -KIPS TON-M KIPS TONS FT-KIPS TON-M KIPS TONS

3x6 0.92 x 1.83 4.1 1.2 36 5 55 25 52 7 79 36

4x6 1.22 x1.83 5.3 1.6 65 9 72 33 94 13 103 47
4x8 1.22 x 2.44 5.3 1.6 85 12 98 44 123 17 138 63
5 x 10 1.53 x 3.05 6.5 2.0 165 23 152 69 239 33 214 97
5 x 16 1.53 x 4.88 6.5 2.0 259 36 240 109 375 52 338 153
6 x 12 1.83 x 3.66 7.5 2.3 295 41 217 98 428 59 306 139
7 x 14 2.13 x 4.27 8.5 2.6 450 62 260 118 652 90 366 166
8 x 12 2.44 x 3.66 9.8 3.0 465 64 268 122 674 93 377 171
8 x 16 2.44 x 4.88 9.8 3.0 662 95 380 172 959 133 535 243
9 x 14 2.75 x 4.27 10.8 3.3 730 101 373 169 1058 146 525 238
9 x 18 2.75 x 5.49 10.8 3.3 937 130 480 218 1358 188 676 307
10 x 16 3.05 x 4.88 11.8 3.6 976 135 450 204 1414 196 634 287
10 x 20 3.05 x 6.10 11.8 3.6 1286 179 590 268 1864 258 831 377
11 x 18 3.35 x 5.49 12.8 3.9 1386 192 581 264 2009 278 818 371
11 x 22 3.35 x 6.71 12.8 3.9 1697 235 711 323 2459 340 1001 454
12 x 24 3.70 x 7.30 13.8 4.2 2196 304 844 383 3183 440 1189 539
13 x 26 3.96 x 7.90 14.8 4.5 2785 385 987 448 4036 558 1390 631
14 x 28 4.27 x 8.53 15.8 4.8 3421 473 1128 512 4958 686 1589 721

PERFORMANCE AT 60% COMPRESSION

METRIC SIZES
FENDERS STAND OFF STANDARD CAPACITY HIGH CAPACITY
SIZE DIAMETER ENERGY ENERGY
REACTION FORCE REACTION FORCE
METRIC ENGLISH UNCOMPRESSED ABSORPTION ABSORPTION

MXM FT X FT FT M FT-KIPS TON-M KIPS TONS FT-KIPS TON-M KIPS TONS

1.00 x 1.50 3.3 x 4.9 4.4 1.3 35 5 50 23 50 7 71 32

1.00 x 2.00 3.3 x 6.6 4.4 1.3 49 7 67 30 71 10 96 43
1.20 x 2.00 3.9 x 6.6 5.3 1.6 64 9 76 34 93 13 107 49
1.20 x 2.50 3.9 x 8.2 5.3 1.6 80 11 94 43 116 16 132 60
1.35 x 2.50 4.4 x 8.2 5.9 1.8 103 14 108 49 150 21 152 69
1.35 x 4.00 4.4 x 13.1 5.9 1.8 165 23 172 478 239 33 242 110
1.50 x 3.00 4.9 x 9.8 6.4 2.0 156 22 146 66 226 31 206 93
1.70 x 3.00 5.6 x 9.8 7.1 2.2 196 27 162 73 284 39 227 103
1.70 x 4.50 5.6 x 14.8 7.1 2.2 297 41 244 111 430 60 344 156
2.00 x 3.50 6.6 x 11.5 8.1 2.5 318 44 222 101 461 64 313 142
2.00 x 4.00 6.6 x 13.1 8.1 2.5 371 51 259 117 538 74 365 165
2.20 x 4.50 7.2 x 14.8 8.7 2.7 500 69 321 146 725 100 452 205
2.20 x 5.50 7.2 x 18.0 8.7 2.7 609 84 390 177 883 122 549 249
2.50 x 4.00 8.2 x 13.1 10.0 3.0 542 75 305 138 786 109 430 195
2.50 x 5.50 8.2 x 18.0 10.0 3.0 793 110 447 203 1149 159 629 285
3.00 x 6.00 9.8 x 19.7 11.6 3.5 1213 168 571 259 1758 243 804 365
3.30 x 4.50 10.8 x 14.8 12.6 3.8 1010 140 430 195 1464 202 606 275
3.30 x 6.50 10.8 x 21.3 12.6 3.8 1581 219 675 306 2291 317 9511 431
3.30 x 10.6 10.8 x 34.8 12.6 3.8 2774 384 1185 538 4020 556 1669 757
4.20 x 8.40 13.8 x 27.6 15.6 4.8 3325 460 1110 503 4819 666 1563 709

PERFORMANCE AT 60% COMPRESSION

* Actual values for above sizes may vary +/- 15% due to variations in materials, speed of compression, temperatures and
tolerances. Performance based on 60% compression.

Ocean Cushion foam filled fenders are also available in other sizes and capacity models, Low Reaction, High, Extra High, and
Super High Capacity.

114
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
Overall Length
Fender Body Length

Overall Fender Overall

Diameter Body Diameter
Diameter

115
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
OCEAN GUARD™ SMALL STANDARD DUTY FOAM FILLED FENDER
Ocean GuardTM Small Standard Duty (SSD) & Ocean GuardTM Small Standard Duty with Hawse Pipe fitting (SSD-HP) foam filled
marine fenders are designed for quick and convenient use. SSD fenders compact sizes are ideal for the limited storage space
available on board of Naval and Commercial Vessels. Their light weight allows for easy installation and can be handled by one or
two people.

OCEAN GUARDTM SMALL STANDARD DUTY (SSD)

SSD fenders are constructed in accordance with US Navy Technical Specifications. They are built with the same quality
construction and materials as OCEAN GUARDTM fenders.
• Lightweight heat laminated closed cell resilient energy absorbing foam core
• Tough non-marking nylon Tire Cord reinforced urethane elastomeric skin
• Integral end fittings either stainless steel or galvanized
• Optional internal through chain

116
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
OCEAN GUARD™ SSD FOAM FILLED FENDERS
FENDERS LOW REACTION ENHANCED CAPACITY STANDARD CAPACITY HARDWARE
SIZE ENERGY REACTION ENERGY REACTION ENERGY REACTION SHACKLE SIZE
ENGLISH METRIC ABSORPTION FORCE ABSORPTION FORCE ABSORPTION FORCE
IN X IN MXM FT-KIPS TON-M KIPS TONS FT-KIPS TON-M KIPS TONS FT-KIPS TON-M KIPS TONS TONS MM
16 x 24 400 x 600 1.7 0.2 10.8 4.9 2.2 0.3 14.4 6.5 2.8 0.4 18.0 8.2 0.5 13
16 x 36 400 x 900 3.2 0.4 12.0 5.4 4.2 0.6 16.0 7.3 5.3 0.7 20.0 9.1 0.5 13
18 x 36 457 x 900 4.1 0.6 12.4 5.6 5.4 0.8 16.6 7.5 6.8 0.9 20.7 9.4 0.5 13
20 x 36 500 x 900 4.9 0.7 13.6 6.2 6.6 0.9 18.1 8.2 8.2 1.1 22.6 10.3 0.5 13
20 x 39 500 x 1000 5.3 0.7 14.7 6.7 7.0 1.0 19.6 8.9 8.8 1.2 24.5 11.1 0.5 13
20 x 48 500 x 1200 6.6 0.9 18.0 8.2 8.8 1.2 24.0 10.9 11.0 1.5 30.0 13.6 0.5 13
22 x 48 558 x 1200 7.3 1.0 19.8 9.0 9.8 1.3 26.4 12.0 12.2 1.7 33.0 15.0 0.5 13
24 x 36 600 x 900 6.3 0.9 14.7 6.7 8.4 1.2 19.6 8.9 10.5 1.5 24.5 11.1 0.5 13
24 x 48 600 x 1200 8.4 1.2 19.2 8.7 11.2 1.5 25.6 11.6 14.0 1.9 32.0 14.5 0.5 13
32 x 50 800 x 1270 16.8 2.3 64.8 29.1 22.4 3.1 86.4 38.8 28.0 3.9 108.0 48.5 0.625 16
36 x 48 900 x 1200 20.4 2.8 31.2 14.2 27.2 3.8 41.6 18.9 34.0 4.7 52.0 23.6 0.625 16
36 x 60 900 x 1500 25.0 3.5 39.0 17.7 33.3 4.6 52.0 23.6 41.6 5.8 65.0 29.5 0.625 16
36 x 72 900 x 1828 32.0 4.4 50.0 22.7 42.6 5.9 66.6 30.2 53.3 7.4 83.3 37.8 0.625 16
39 x 60 1000 x 1500 30.0 4.1 42.0 19.1 40.0 5.5 56.0 25.4 50.0 6.9 70.0 31.8 0.625 16
40 x 60 1016 x 1500 31.2 4.3 43.7 19.8 41.6 5.8 58.2 26.4 52.0 7.2 72.8 33.0 0.625 16

OCEAN GUARD™ SMALL STANDARD DUTY

WITH HAWSE PIPE (SSD-HP)
SSD-HP fenders are constructed equivalent to our OCEAN
GUARD™ Small Standard Duty (SSD) foam filled fenders, which
they exception that they are constructed with a heavy duty thru
pipe – Hawse pipe instead of pad eye end fittings.

• Standard denser heat laminated closed cell resilient

energy absorbing foam core
• Tough non-marking nylon Tire Cord reinforced urethane
elastomeric skin
• Hawse pipe (thru pipe) construction

* Actual values for above sizes may vary +/- 15% due to variations
in materials, speed of compression, temperatures and tolerances.
Performance based on 60% compression.

117
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

A SERIES F SERIES
THROUGHOUT THE WORLD, MORE PEOPLE RELY CLASSIC EUROPEAN TWIN-EYE STYLE FENDERS
ON OUR A SERIES THAN ALL OTHER BUOYS. DESIGNED FOR THE MOST DEMANDING USE.
The A Series is the product that launched the Polyform Polyform has been producing this fender for over 40 years
story. This all-purpose product, with the signature “blue and there is no comparison when it comes to quality, range of
ropehold,” has proven itself in the most adverse conditions. sizes and protection offered. The F Series fender has offered
We’ve made a couple of changes to the legendary A-Series protection to the finest yachts and fishing vessels all over the
for 2001. There’s a new size – the A-7, with more buoyancy world. Why?
than any other buoy in its class, and a redesigned ropehold. Because the owners and the captains of these prestigious
The new ropehold has been incorporated into the A-5, A-6, boats know that they can rely on Polyform’s F Series to
and A-7 and features stronger ribs, a larger eye that accepts offer the size, strength and dependability to protect their
a standard shackle, and a new “dual valve” inflation-deflation vessel from the rigors of the sea and weather. If you want the
system. Marking gear in heavy seas is no easy task. That’s why ultimate in protection for your boat, Polyform F Series is the
more fishermen use Polyform A Series than all other buoys only choice!
combined. We’ve seen and heard the testimonials from our
customers. You name the ocean, sea, or river, and the A Series Size (In) Eye Dia. Circum. Volume Pieces
Model (Dia x Length) (in) (in) (Gallons) Per Carton
has been there. Put your trust in Polyform’s most versatile and
well-known product.
F-1 6 x 24 0.7 18.9 1.9 10

F-02 7.5 x 26 0.7 23.6 3.1 10

Size (In) Eye Dia. Circum. Volume Pieces
Model (Dia x Length) (in) (in) (Gallons) Per Carton
F-2 8.2 x 25 0.9 25.8 4.3 10
A-0 8 x 11.5 0.6 25.1 1.6 20
F-3 8.2 x 30 0.9 25.8 5.4 10

A-1 11 x 15 1 34.6 3.5 10

F-4 8.5 x 40.5 0.9 26.7 7.7 5

A-2 14.5 x 19.5 1.125 45.6 8.2 10 F-5 11 x 30 1 34.6 7.3 5

A-3 17 x 23 1.125 53.4 14.5 10 F-6 11 x 42 1 34.6 15.1 5

F-7 15 x 41 1 47.1 18.8 5

A-4 20.5 x 27 1.125 64.4 22.5 10

F-8 15 x 58 1 47.1 39.6 4

A-5 27 x 36 1.25 84.9 47.6 5
F-10 18 x 50 1 56.6 33.8 2

A-6 34 x 44 1.5 106.9 95.1 3

F-11 21.2 x 57.5 1.1 66.6 63.7 3

A-7 39 x 54 2 122.6 162 2 F-13 29 x 76.5 1.2 91.1 158.6 2

118
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
PROJECT REQUIREMENTS
PROJECT DETAILS PROJECT STATUS
PORT MFI REF:
PROJECT DETAILS o PRELIMINARY
CONSULTANT o DETAIL DESIGN
CONTRACTOR o TENDER

LBP
B
LOA
LARGEST VESSEL SMALLEST VESSEL
VESSEL TYPE VESSEL TYPE
DEAD WEIGHT TONNAGE (DWT) (t) DEAD WEIGHT TONNAGE (DWT) (t)
GROSS TONNAGE (GT) (t) GROSS TONNAGE (GT) (t)
DISPLACEMENT (DISP) (t) DISPLACEMENT (DISP) (t)
LENGTH OVERALL (LOA) (m) LENGTH OVERALL (LOA) (m)
LENGTHS BETWEEN PERPS (LBP) (m) LENGTHS BETWEEN PERPS (LBP) (m)
BEAM (B) (m) BEAM (B) (m)
DRAFT (D) (m) DRAFT (D) (m)
FREEBOARD (F) (m) FREEBOARD (F) (m)
HULL PRESSURE (P) (t/m2) HULL PRESSURE (P) (t/m2)
BERTH DETAILS

o CLOS E D STRUCTURE o S EMI-OPEN STRUCTURE o OPEN STRUCTURE o CO R N E R P ROTEC TIO N/

TU R N I N G DO LP H I N

STRUCTURE TIDE LEVELS

LENGTH OF BERTH (m) TIDAL RANGE (m)
FENDER / DOLPHIN SPACING (m) HIGHEST RECORDED TIDE (HRT) (m)
PERMITTED FENDER REACTION (kN/m) HIGHEST ASTRONOMIC TIDE (HAT) (m)
QUAY LEVEL (m) MEAN HIGH WATER SPRING (MHWS) (m)
COPE THICKNESS (m) MEAN SEA LEVEL (MSL) (m)
SEABED LEVEL (m) MEAN LOW WATER SPRING (MLWS) (m)
SEABED COMPOSITION LOWEST ASTRONOMIC TIDE (LAT) (m)
STANDOFF max min (m) LOWEST RECORDED TIDE (LRT) (m)

REFERENCES

1. BS 6349: Maritime Structures - Part 4 Code of practice for design of fendering and mooring systems
2. PIANC: Guidelines for the design of fendering systems: 2002
3. United Facilities Guild Specification 02396
4. United Facilities Guild Specification 35 59 13.16 (August 2008)

Dock Sand Water Fender

119
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

CHAIN AND SHACKLE

Chain or wire rope may be used to suspend either cylindrical or
rectangular fenders, but chain is more corrosion resistant than wire
rope. Chain provides more bearing surface on the I.D. of the fender, thus
reducing tear potential at the ends of the fender.

Recommended chain for different sizes:

1. 1/2’’ chain for cylindrical fenders up to and including 8’’ OD X 4’’ I.D.
2. 5/8’’ chain used for 10’’ OD X 5’’ up to and including 18’’ x 9’’ size (some
applications of 18’’ x 9’’ based on conditions will use heavier chain). TYPICAL SHACKLE
3. 3/4’’ chain used for 18’’ x 9’’ to 24’’ x 12’’ fender.

The ‘’long link chain’’ shown in the specifications below does not
restrict fender deflection as much as heavier, shorter link chain would.
Experience indicates that ultimate breaking strength of chain is more
A
important than its shock load ability.
Mounting eyebolts so they do not project beyond the dock face will

Sect.
view
prevent restricting fender deflection. On old docks, pad eyes may be
used to limit projection from the dock face.
The shackle should be high strength, with a greater ultimate strength
than that of the chin being used. We recommend a safety anchor pin B
shackle with an alloy pin, one size larger than the chain being used.
These chain and alloy shackle selections permit the eye of the shackle to
pass through the chain’s long link; simplifying installation. C

TYPICAL LINK

DOCK FENDER CHAIN

SIZE / DIA. 1/2 INCH 5/8 INCH 3/4 INCH 1 INCH 12.7 MM 15.9 MM 19.1 MM 25.4 MM

PROOF TEST 15,000* 35,000* 55,000* 100,000* 6,804** 15,876** 24,948** 45,351**

AV. ULT. STRENGTH 35,000* 58,000* 105,000* 160,000* 15,876** 26,308** 47,627** 72,562**

MAX. ELONGATION 15% 15% 15% 15% 15% 15% 15% 15%

BRINELL HARNDESS 229-277 229-277 331-388 331-388 229-277 229-277 229-277 331-388

LINKS PER FT. (PER

3.2 3.2 3.2 2.9 10.5 10.5 10.5 9.54
M) NOMINAL
WT. PER 100FT.
205* 320* 446* 814* 3.05 4.78 4.78 12.1
(PER M)
MAX. LINK WIDTH 1.875 2.243 2.700 3.375 47.60 56.97 56.97 85.72

A (INSIDE LENGTH) 3.25 + .015-0 3.75 + .015-0 3.75 ± .025 4.125 95.25 95.25 95.15 104.78

B (INSIDE WIDTH) .789 ± .031 .900 ± .031 1.125 ± .031 1.375 20.04 22.86 28.48 34.93

C (THICKNESS) 0.531 0.656 .750 ± .008 1.000 13.49 16.66 19.05 25.40

D (MAX. SWELL) 0.025 0.025 - - 0.064 0.064 - -

ALLOY SAFETY
851A 852A 854A 854A 851A 852A 854A 854A
ANCHOR SHACKLE
SHACKLE ULTIMATE
60,000* 81,000* 135,000 135,000 27,216** 36,741** 61,235** 61,235**
STRENGTH

* STRENGTHS AND WEIGHTS IN LBS. * STRENGTHS AND WEIGHTS IN KG.

HOT DIPPED GALVANIZED

120
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
RUBBER FENDERS

121
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
TYPES, SIZES & WEIGHTS RECTANGULAR FENDERS
CYLINDRICAL FENDERS

A Tolerances:
+/- 4% on faces
+/- 8% on bore
Tolerances: +/- 1% on length
ID +/- 3% on faces or 1/2’’
+/- 8% on bore
OD +/- 1% on length B D-Bore Optional.
or 1/2’’
C

DIMENSIONS (INCHES) DIMENSIONS (MM)

DIMENSIONS (INCHES) DIMENSIONS (MM)
A B C WT* A B C WT*
OD ID WT* OD ID WT*
4 0 8 16.0 102 0 203 23.8
7 3-1/2 14 178 89 21
5 2-1/2 6 13.0 127 64 152 19.3
7 3 16 178 75 24
5 2-1/2 6-1/2 14.0 127 64 165 20.8
8 4 19 203 102 28
6 2-1/2 6-1/2 19.5 152 64 165 29.0
8 3-1/2 21 203 89 31
6 3 10 27.0 152 76 254 40.2
10 5 30 254 127 45
12 6 43 305 152 64 A 6 2 12 35.0 152 51 305 52.0

15 7-1/2 67 381
B 191 100
7 3 10 32.0 178 76 254 47.6

18 9 97 457 229 144 8 3 8 29.0 203 76 203 43.2

8 3 10 37.0 203 76 254 55.1
ID 21 10-1/2 131 533 267 195
10 4 10 44.5 254 102 254 66.2
OD 24 12 171 610 305 255
28 14 233 711 356 347 10 4 12B 54.0 254 102 305 80.4
A
32 16 294 813 406 437 12 5 12C 63.0 305 127 305 93.7
36 18 372 914 457 554 12 6 14 71.0 305 152 356 105.7
48 24 661 1219 610 984 D 14 6 14 85.0 356 152 356 126.5
60 30 1032 1524 762 1535 16 6-1/2 16 114.0 406 165 406 169.4
* LBS./FT. * KG/METER C 18 7-1/4 18 143.0 457 184 457 212.4
20 8 20 177.0 508 203 508 263.0

* LBS./FT. * KG/METER

WING-TYPE FENDERS
DIMENSIONS (INCHES) WEIGHTS (LBS./FT)

A B C D WT
6 3 9 1-1/2 15.4
B Tolerances:
+/- 4% on faces 8 4 12 2 26.0
+/- 8% on bore 10 4 16 2-1/2 46.0
+/- 1% on length
12 6 18 3 59.0
or 1/2’’

DIMENSIONS (MM) WEIGHTS (KG./METER)

A
A B C D WT
152 76 229 38 22.9
D 203 101 305 51 38.7
254 101 406 64 68.4
C 305 152 457 76 87.8

122
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

B ROUND BORE
DIMENSIONS (INCHES) WEIGHTS (LBS./FT) DIMENSIONS (MM) WEIGHTS (KG/METER)

A B C WT A B C WT

A 6 2-1/2 5 11.5 152 64 127 17.1

8 3 8 25.5 203 76 203 37.9
10 3 8 34.5 254 76 203 51.3
10 4 10 39.0 254 102 254 58.0
C 10 4 12 46.0 254 102 305 68.4

Tolerances: 12 5 12 55.0 305 127 305 81.8

+/- 4% on faces 14 6 14 75.0 356 152 356 112.0
+/- 8% on bore
14 3 18 104.0 356 76 457 155.0
+/- 1% on length
or 1/2’’

B
B D-SHAPED BORE
DIMENSIONS (INCHES) WEIGHTS (LBS./FT) DIMENSIONS (MM) WEIGHTS (KG/METER)

A B C D E WT A B C D E WT

A D 6 3 6 3 1-1/2 12.5 152 76 152 79 38 18.6

DA 8 4 8 4 2 22.0 203 101 203 101 51 32.7

E 10 5 10
A
5 2-1/2 34.0 254 127 254 127 64 506.0
12 6 12 6 3 49.0 305 152 305 152 76 72.9

C 14 7 14
D7 3-1/2 66.0 356 178 356 178 89 98.2
C 16 8 16 8 4 86.0 406 203 406 203 102 128.0
Tolerances:
+/- 4% on faces 18 9 18
E9 4-1/2 109.0 457 229 457 229 114 162.2
+/- 8% on bore 20 10 20 10 5 B
135.0 508 254 508 254 127 200.9
+/- 1% on length
or 1/2’’ C

“D” FENDERSB TAPERED SIDES

DIMENSIONS (INCHES) WEIGHTS (LBS./FT)
A D
A B C DD E WT
3-3/4 2 4-1/2 2-1/4 3/4 5.0
E A
6 2-7/8 6-3/4 3 1-1/2 12.5

C D Tolerances:
+/- 4% on faces
A B C D E WT E +/- 8% on bore
+/- 1% on length
95 51 114 57 19 7.4
B or 1/2’’
152 73 171 76 38 18.6
C

123
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

DELTA “A” SERIES, EXTERNAL PLATE

A
Tolerances:
+/- 4% on faces
+/- 8% on bore
+/- 1% on length
or 1/2’’
D
C
E
F

DIMENSIONS (INCHES) WEIGHTS IN LBS./FT.

MODEL A B C D E F
13A 12 7-1/2 13 6-1/2 17 20

20A 16 10 20 10 25 28

23A 20 12 23 12 29 33
* RUBBER/STEEL

MODEL A B C D E F
13A 305 191 330 165 432 508

20A 406 254 508 254 635 711

23A 508 305 584 305 737 838

* RUBBER/STEEL

Rubber options: EPDM/butyl, butyl, low-friction butyl and non-marking gray

EPDM rubber compounds all are available.

Desiger’s note: Consult Waterman Supply for design/budgetary assistance on

any special shape or profile. Our analysis can include load deflection/energy
characteristics, as well as low/high temperature behavior, shape factor limitations,
tear strength and other design criteria free of charge. Special compounds may be
recommended for specific problem solutions.

124
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

COMMERCIAL BUMPERS
WT 100 SERIES - “D” SHAPE
H

DIMENSIONS (INCHES)
WT CODE NO. COLOR BASE WIDTH HEIGHT WALL THKNS. WT./FT. LBS. LENGTH UP TO
(W) (H) (WT)
DB-50 Black 2-1/8 2 7/16 1.3 60 FT.

DB-50B H Grey 2-1/8 2 7/16 1.6 60 FT.

WT
DB-50C White 2-1/8 2 7/16 1.6 60 FT.

DB-75 Black 3-1/8 2-7/8 11/16 2.8 60 FT.

DB-75B Grey 3-1/8 2-7/8 11/16 3.4 60 FT.

W H
DB-75C White 3-1/8 3-7/8 11/16 3.4 60 FT.

DB-100 Black 4-1/4 3-7/8 3/4 4.6 60 FT.

DB-100B Grey 4-1/4 3-7/8 3/4 5.3 60 FT.

DB-100C White 4-1/4 3-7/8 3/4 5.3 60 FT.

W
D SHAPE / D-BORE
WT

DIMENSIONS (INCHES)
CODE NO. COLOR BASE WIDTH HEIGHT WALL THKNS. WT./FT. LBS. LENGTH UP TO
(W) (H) (WT)
DB-101 Black 4-1/4 3-7/8 3/4 4.6 60 FT.

DB-115 Black 4-1/2 3-3/4 3/4 4.7 60 FT.

DB-125 Black 6-3/4 6 1-1/2 13.6 20 FT.

DB-150 Black 9-1/2 8 1-1/2 19.5 20 FT.

125
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

200 SERIES - CYLINDRICAL FENDER

B D

DIMENSIONS (INCHES)

OUTSIDE LENGTH
CODE NO. BORE WT./FT. LBS.
DIAMETER UP TO
(B)
(D)

DB-202 3 1 3.2 60 FT.

DB-203 3 1-1/2 2.7 60 FT.

DB-205 5 2-1/2 8.0 30 FT.

DB-206 7 3 16.0 20 FT.

DB-207 7 3-1/2 15.5 20 FT.

DB-208 8 4 18.2 20 FT.

DB-210 10 5 32 20 FT.

DB-212 12 6 46 20 FT.

DB-215 15 7-1/2 67 20 FT.

DB-218 18 9 96.7 10 FT.

126
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
300 SERIES - RECTANGULAR FENDER

H B

DIMENSIONS (INCHES)
WT./FT. LENGTH
CODE NO. HEIGHT WIDTH BORE LBS. UP TO
(H) (W) (B)

DB-302 2 4 SOLID 3.9 60 FT.

DB-303 3-1/2 4-1/2 1 8.0 60 FT.

DB-304 5 5 2-1/2 9.8 60 FT.

DB-305 5 6-1/2 2-1/2 13.0 40 FT.

DB-305A 5-1/2 6 2-1/2 13.9 40 FT.

DB-306 6 6-1/2 2-1/2 17.4 20 FT.

DB-306A 6 6 2-7/8 14.6 20 FT.

DB-306B 6 7 2-1/2 18.0 20 FT.

DB-307 7 10 3 34.1 20 FT.

DB-307A 7 10 3-1/2 30.0 20 FT.

DB-308 8 8 3 28.2 20 FT.

DB-309 8 10 3 39.5 20 FT.

DB-309A 9 10 SOLID 50.7 20 FT.

DB-310 10 10 4 42.4 20 FT.

DB-311 10 12 4 60.0 20 FT.

DB-312 12 12 5 68.0 20 FT.

DB-313 12 12 4 68.5 20 FT.

DB-314 14 14 6 83 20 FT.

127
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
400 SERIES
WING TYPE “O” BORE
D

BT
W
DIMENSIONS (INCHES)
WT./FT. LENGTH UP
CODE NO. OUTSIDE DIAMETER LBS. TO
BASE WIDTH (W) BASE THICKNESS (BT) BORE (B)
(D)
DB-404 4 1/2 2-1/2 1 3.5 60 FT.
DB-405 5 1/2 2-1/2 1 4.0 60 FT.
DB-406 6 3/4 3 1 5.3 60 FT.
DB-407 6-1/2 1 4 2 7.0 60 FT.
DB-408 6-1/2 1 4 1 8.9 60 FT.
DB-409 9 1-1/2 6 3 14.4 20 FT.
DB-410 9-1/2 1-1/2 6 2 16.2 20 FT.
DB-412 12 2 8 4 27.0 20 FT.
DB-416 16 2-1/2 10 4 46.0 20 FT.
DB-418 18 3 12 6 61.0 20 FT.

WING TYPE SOLID BORE

R

BT
W

DIMENSIONS (INCHES)
WT./FT. LENGTH
CODE NO. LBS. UP TO
BASE WIDTH (W) BASE THICKNESS (BT) RADIUS (R)

DB-460 10 1-1/4 4 14.6 20 FT.

WING TYPE “D” BORE

D
WT

BT

DIMENSIONS (INCHES)
WT./FT. LENGTH
CODE NO. OUTSIDE DIAMETER WALL THICKNESS LBS. UP TO
BASE WIDTH (W) BASE THICKNESS (BT)
(D) (WT)
DB-440 9-1/2 1-1/2 6 1 14.9 20 FT.

128
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

500 SERIES - FAN NOSE

D
WT

BT

DIMENSIONS (INCHES)
WT./FT. WALL LENGTH
CODE NO. BASE WIDTH BASE THICKNESS OUTSIDE DIAMETER LBS. THICK. UP TO
P
(W) (BT) (D)

DB-503* 2-1/2 17/32 3 1/4 2.5 5/8 60 FT.

DB-504* 3-3/4 25/32 4-1/4 1/4 3.2 3/4 60 FT.

DB-506* 5-7/16 1 6 5/16 9.0 1 40 FT.

DB-508* 7-1/4 1-3/16 8 3/8 15.5 1-1/2 20 FT.

DB-510* 9-1/4 1-11/16 10 3/8 24.8 1-1/2 20 FT.

DB-512* 11 2 12 9/16 28.6 2 20 FT.

* WHITE OR GREY UPON REQUEST

800 SERIES - CORNER GUARD

Y

X
W

BT

DIMENSIONS (INCHES)
CODE OUTSIDE WT./FT. LENGTH
NO. BASE WIDTH BASE THICKNESS WING LENGTH LBS. UP TO
DIAMETER
(W) (BT) (X)
(Y)

DB-809* 5-9/16 1-1/2 2 3 21.0 10 FT.

* WHITE OR GREY UPON REQUEST

129
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS
900 SERIES - D-SHAPED / O-BONE

BASE BASE
DURAMAX BORE LENGTH
CODE NO. PART NO.
WIDTH HEIGHT
(B)
WT./FT.
UP TO
(W) (H)
DB-906 802090601 5" 6" 2-1/2" 11.7 LBS. 20 FT.
B H
DB-906A 802090611 6" 6" 3" 13 LBS. 20 FT.
DB-908 802090801 8" 8" 3" 26.2 LBS. 20 FT.
DB-909 802090901 8" 10" 3" 34 LBS. 20 FT.
DB-909B 802090911 9-1/4" 10" 3" 40 LBS. 20 FT.
W
DB-910 802091001 10" 10" 3" 43 LBS. 20 FT.
DB-910A 802091011 10" 10" 4" 41.7 LBS. 20 FT.
DB-912 802091201 12" 12" 4" 66 LBS. 20 FT.
DB-912A 802091211 12" 12" 5" 65 LBS. 20 FT.
DB-912B 802090013 12" 14" 5" 69.6 LBS. 20 FT.
DB-912C 802091231 12" 14" 4" 73.3 LBS. 20 FT.
DB-914 802091401 14" 14" 6" 76.8 LBS. 20 FT.
DB-914B 802091421 14" 12" 6" 60 LBS. 20 FT.
DB-914C 802091431 13.5" 12" 6" 60 LBS. 20 FT.

900 SERIES - D-SHAPED / D-BONE B H

W H
B

BASE BASE
DURAMAX BORE LENGTH
CODE NO. PART NO.
WIDTH HEIGHT
(B)
WT./FT.
UP TO
(W) (H)
DB-954 802090022 4" 4" 2" x 2" 6 LBS. 20 FT.
H
DB-956 802090021 6" 6" 3" x 3" 12.5 LBS. 20 FT. B
DB-958 802090005 8" 8" 4" x 4" 22.5 LBS. 20 FT.
DB-960 802090011 10" 10" 5" x 5" 35.1 LBS. 20 FT.
DB-962 802090015 12" 12" 6" x 6" 50.5 LBS. 20 FT.
W
DB-964 802090003 14" 14" 7" x 7" 72 LBS. 20 FT.

130
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043
 FENDERS

1000 SERIES - FLAT HEAD

HW

B
H

BT

W
HW

BASE WIDTH BASE THKNS. HEAD WIDTH BORE LENGTHS UP

CODE NO. HEIGHT WT./FT.
B
(W) (BT) (HW) (B) TO

DB-1006 6-1/2" H
1-11/16" 7-3/8" 6" 1-3/4" 18.6 LBS. 30 FT.

DB-1009 9" 2-29/32" 9-7/16" 7-1/2" 3" 24 LBS. 30 FT.

WT BT

W H

1000 SERIES - CHANNEL LOCK

W
WT

WT./FT. NOT SUPPLIED

BASE WIDTH HEIGHT
CODE NO. (W) (H)
WALL THKNS. (WT) RUBBER LENGTHS UP TO AS STANDARD
ONLY EQUIPMENT
REYNOLDS
ALUMINUM
DB-1103 3" 3-1/4" 1-9/32" 2.8 LBS. 60 FT. CHANNEL NO. 351
3" X .247 WEB 1/4" X
1-1/2" ALUM. BAR
REYNOLDS
ALUMINUM
DB-1104 4" 4-5/16" 3/4" 4.5 LBS. 40 FT CHANNEL NO. 2644
4" X .247 WEB 1/4" X
2" ALUM. BAR

131
EMAIL PHONE FAX
WWW.WATERMANSUPPLY.COM [email protected] 310.522.9698 310.522.1043