About Us

Hertz Kompressoren is the premium export brand of Dalgakiran, one of the leading air
compressor producers in the world which has developed a truly international compressed
air sales & service network worldwide.

Hertz Kompressoren was founded in Germany in 2005. Today, we use our more than 55
years of design and manufacturing experience to provide you the ideal air solutions for
your business.
With our visionary orientation, we continuously develop our products and services under
the guidelines of efficiency and sustainability. We are continuously working on more
efficient and robust compressors that provide the specific requirements of each industry
in order to contribute to sustainability by reducing the energy consumption of the facilities.
 COMPRESSED
AIR
DRYERS

HRD - Refrigerated Type Air Dryers............................................................................................... 06

HRD HPN - Refrigerated Type High Pressure Air Dryers................................................. 08

HRD DS - Digital Scroll Compressed Air Dryers..................................................................... 10

HIC - Ice Cube Static Compressed Air Dryers.......................................................................... 12

HRD H - Refrigerated Type High Temperature Compressed Air Dryers............... 13

HRC - Refrigerated Type Cycling (Thermal Mass) Air Dryers........................................ 14

HMD - Modular Adsorption Compressed Air Dryers.......................................................... 16

HMD VP - Desiccant Compressed Air Dryers.......................................................................... 18

HDA - Heatless Adsorption Compressed Air Dryers........................................................... 20

HBP - Blower Purge Adsorption Compressed Air Dryers............................................... 22

HCC - Catalytic Converters................................................................................................................... 24

4
5
COMPRESSED AIR DRYERS
 REFRIGERATED TYPE 0,35-196,7
HRD COMPRESSED AIR DRYERS m3/min

What are refrigerated air dryers?

They cool the compressed air passing through them and keep that air dry down to the dew
point of +3°C. Inlet and outlet filters integrated into the dryer (up to the HRD 210 model) reduce
the particle level by 0.01 microns and the oil particle level by 0.01 mg/m³.

Key Features
• Very low pressure losses
• Design suitable for tropical climates
• R-134a Refrigerant
• Operates at 60°C inlet temperature and 50°C
ambient temperature
• Compact design
• Minimum footprint
• Digital controller for energy savings
• High efficiency
• Ease of access
• Separate electrical and cooling sections

6
 Maximum Maximum Maximum
Capacity* Connection Working Ambient Inlet Included Filter Weight
MODEL Voltage** Refrigerant Dimensions (mm)
Size Pressure Temperature Temperature and Type

m3/min cfm bar 0

C C
0
Length Width Height Kg

HRD 10 0,35 12 G ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 55 MX+MY 423 393 567 32

HRD 20 0,58 20 G ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 55 MX+MY 423 393 567 32

HRD 30 0,83 29 G ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 55 MX+MY 423 393 567 32

HRD 35 1,05 37 G ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 75 MX+MY 423 393 567 35

HRD 40 1,45 51 G ¾” 230V/1/50 Hz R-134a 16 50 60 HGKON 155 MX+MY 473 453 832 51

HRD 50 2,17 77 G ¾” 230V/1/50 Hz R-134a 16 50 60 HGKON 155 MX+MY 473 453 832 53

HRD 60 2,83 100 G ¾” 230V/1/50 Hz R-134a 16 50 60 HGKON 155 MX+MY 473 453 832 55

HRD 70 3,30 117 G 1 ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 405 MX+MY 553 503 874 78

HRD 80 4,7 166 G 1 ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 405 MX+MY 553 503 874 83

HRD 90 5,9 208 G 1 ½” 230V/1/50 Hz R-134a 16 50 60 HGKON 405 MX+MY 553 503 874 86

HRD 100 7,8 275 G 2” 230V/1/50 Hz R-134a 16 50 60 HGKON 805 MX+MY 678 648 1157 160

HRD 110 9,8 346 G 2” 230V/1/50 Hz R-134a 16 50 60 HGKON 805 MX+MY 678 648 1157 165

HRD 120 13,8 487 G 2” 230V/1/50 Hz R-134a 16 50 60 HGKON 1205 MX+MY 948 728 1370 220

HRD 130 18,3 646 G 2” 230V/1/50 Hz R-134a 16 50 60 HGKON 1205 MX+MY 948 728 1370 230

HRD 140 21,8 770 G 3” 400V/3/50Hz R-134a 16 50 60 HGKON-HC-1805 MX+MY 948 798 1460 270

HRD 150 27,1 957 G 3” 400V/3/50Hz R-134a 16 50 60 HGKON-HC-1805 MX+MY 948 798 1460 285

HRD 160 36,7 1296 G 3” 400V/3/50Hz R-134a 16 50 60 HGKON-HC-2775 MX+MY 1163 778 1725 392

HRD 170 43,7 1543 G 3” 400V/3/50Hz R-134a 16 50 60 HGKON-HC-2775 MX+MY 1163 778 1725 410

HRD 180 52,4 1850 DN100 400V/3/50Hz R-134a 16 50 60 HGKON-HC-5850 MX+MY 1397 847 1770 492

HRD 190 61,6 2175 DN100 400V/3/50Hz R-134a 16 50 60 HGKON-HC-5850 MX+MY 1397 847 1770 520

HRD 200 80,0 2825 DN100 400V/3/50Hz R-134a 16 50 60 HGKON-HC-5850 MX+MY 1467 1077 1930 696

HRD 210 92,0 3249 DN100 400V/3/50Hz R-134a 16 50 60 HGKON-HC-5850 MX+MY 1467 1077 1930 718

HRD 220 109,7 3874 DN150 400V/3/50Hz R-134a 16 50 60 Not Included 2188 1062 1925 900

HRD 230 123,9 4375 DN150 400V/3/50Hz R-134a 16 50 60 Not Included 2188 1062 1925 925

HRD 240 141,6 5001 DN150 400V/3/50Hz R-134a 16 50 60 Not Included 2247 1200 2044 975

HRD 250 165,2 5834 DN200 400V/3/50Hz R-134a 16 50 60 Not Included 2247 1200 2044 1100

HRD 260 196,7 6946 DN200 400V/3/50Hz R-134a 16 50 60 Not Included 2550 1550 2100 1400

- Hertz reserves its rights to change the specifications without any prior notice.
* Capacity is given at atmospheric Pressure at 20 OC (ISO 1217) in accordance with norms ISO 7183-8573-1 and Pneurop 6611- Class 4-7 bar -35 OC inlet - 25 OC ambient.
** Consult sales representative for optional voltages

PRE FILTER (X) FINE FILTER (Y)

Efficiency rating: Efficiency rating:

HRD Dryer Sizing Example;
1 Micron particle 0.01 Micron particle
removal & 0.5mg/m3 removal & 0.01mg/m3
oil removal oil removal
If a compressor delivers 20 m3/min at 6 bar, the dryer inlet
temperature is 40ºC and the ambient temperature is 30ºC,
please choose your dryer as follows;

PARTICLE FILTER (P) ACTIVATED CARBON

FILTER (A) Dryer Capacity = 20 / 0.94 / 0.92 / 0.98 = 23,6 m3/min
Efficiency rating:
Efficiency rating:
5 Micron particle
0.01 Micron particle
removal
removal & 0.003 mg/m3 The correct dryer model for this application is HRD 150.
(removes desiccant
oil removal
particles after the dryer)
COMPRESSED AIR DRYERS

CORRECTION FACTORS FOR HRD AIR DRYERS:

Inlet Temperature °C 30 35 40 45 50 60 - -
F1 1,29 1 0,92 0,78 0,65 0,45 - -
Ambient Temperature °C 20 25 30 35 40 50 - -
F2 1,05 1 0,98 0,93 0,84 0,7 - -
Pressure Bar 4 6 7 8 10 12 14 16
F3 0,80 0,94 1 1,04 1,11 1,16 1,22 1,25

7
 REFRIGERATED TYPE HIGH PRESSURE 0,83-60,0
HRD HPN COMPRESSED AIR DRYERS m3/min

What are high-pressure compressed air dryers?

They ensure 100% contact between the air and refrigerant circuits. They offer excellent cooling
by combining high efficiency with advanced performance.

Key Features
• Latest technology 3-in-1 design
• Low pressure difference
• Compact design with 3-in-1 heat exchanger
• Meets every capacity and power requirement
• Stainless steel, brazed, plated heat exchanger
• Size reduction and excellent heat transfer
• Corrosion prevention
• Safety test against leakages

8
 Maximum Maximum Maximum
Capacity* Connection Working Ambient Inlet Dimensions (mm) Weight
Model Voltage Pressure Temperature Temperature
Size
m3/min cfm bar 0
C 0
C Length Width Height Kg

HRD 50 HPN 0,83 29 G ¾” 230V/1/50 Hz 45 45 50 454 361 553 36

HRD 90 HPN 1,50 53 G ¾” 230V/1/50 Hz 45 45 50 454 361 553 38

HRD 150 HPN 2,50 88 G ¾” 230V/1/50 Hz 45 45 50 453 401 623 45

HRD 220 HPN 3,67 130 G ¾” 230V/1/50 Hz 45 45 50 453 401 623 45

HRD 300 HPN 5,00 177 G 1 1/4” 230V/1/50 Hz 45 45 50 505 451 761 70

HRD 400 HPN 6,67 236 G 1 1/4” 230V/1/50 Hz 45 45 50 505 451 761 72

HRD 500 HPN 8,33 294 G 1 1/4” 230V/1/50 Hz 45 45 50 505 451 812 78

HRD 575 HPN 9,58 338 G 1 1/4” 230V/1/50 Hz 45 45 50 505 451 812 80

HRD 775 HPN 12,9 456 G 1 1/4” 230V/1/50 Hz 45 45 50 675 501 984 115

HRD 910 HPN 15,2 537 G 1 1/4” 230V/1/50 Hz 45 45 50 675 501 984 120

HRD 1000 HPN 16,7 590 G 2” 230V/1/50 Hz 45 45 50 947 727 1170 218

HRD 1160 HPN 19,4 685 G 2” 230V/1/50 Hz 45 45 50 947 727 1170 220

HRD 1500 HPN 25,0 883 G 2” 230V/1/50 Hz 45 45 50 947 727 1170 225

HRD 1600 HPN 26,7 943 G 2” 400V/3/50Hz 45 45 50 947 797 1460 263

HRD 1800 HPN 30,0 1059 G 2” 400V/3/50Hz 45 45 50 947 797 1460 265

HRD 2200 HPN 36,7 1296 G 2 1/2” 400V/3/50Hz 45 45 50 1162 797 1495 352

HRD 2500 HPN 41,7 1473 G 2 1/2” 400V/3/50Hz 45 45 50 1162 797 1495 353

HRD 2700 HPN 45,0 1589 G 2 /2”

1
400V/3/50Hz 45 45 50 1162 797 1495 355

HRD 3000 HPN 50,0 1766 G 2 /2”

1
400V/3/50Hz 45 45 50 1162 797 1495 422

HRD 3300 HPN 55,0 1942 G 2 1/2” 400V/3/50Hz 45 45 50 1162 797 1495 423

HRD 3600 HPN 60,0 2119 G 2 1/2” 400V/3/50Hz 45 45 50 1162 797 1495 425

- Hertz reserves its rights to change the specifications without any prior nitice.

* Nominal flow is calculated at the following conditions: Inlet Pressure: 40 bar, Inlet Temperature: 35°C Ambient Temperature 25°C for other conditions please refer to the correction factor

table.

PRE FILTER (X) FINE FILTER (Y)

Efficiency rating: Efficiency rating:

HRD HPN Dryer Sizing Example;
1 Micron particle 0.01 Micron particle If a compressor delivers 20 m3/min at 35 bar, the dryer inlet
removal & 0.5mg/m3 removal & 0.01mg/m3
oil removal oil removal
temperature is 40ºC and the ambient temperature is 30OC,
please choose your dryer as follows;

ACTIVATED CARBON Dryer Capacity = 20 / 0,96 / 0,82 / 0,63 = 40,3 m3/min

PARTICLE FILTER (P) FILTER (A)
Efficiency rating:
5 Micron particle
Efficiency rating: The correct dryer model for this application is HRD 2500 HPN.
0.01 Micron particle
removal
removal & 0.003 mg/m3
(removes desiccant
oil removal
particles after the dryer)

CORRECTION FACTORS FOR HRD HPN SERIES

Pressure (bar) 20 25 30 35 40 45 - - -
COMPRESSED AIR DRYERS

F1 0,84 0,91 0,93 0,96 1 1,02 - - -

Ambient Temperature ( C) O
- - - - 25 30 35 40 45
F2 - - - - 1 0,93 0,87 0,82 0,79
Inlet Temperature (OC) - - - - 35 40 45 50 -
F3 - - - - 1 0,85 0,72 0,63 -

9
 DIGITAL SCROLL 15,50-208,33
HRD DS AIR DRYERS m3/min

The new HRD DS series uses proprietary digital evaporator technology to deliver significant
energy savings over conventional cycle and variable speed designs. Using advanced technology,
it operates within different inlet flow ranges, making it by far the most efficient compressor to
be used in a refrigerated air dryer. HRD DS Dryers are equipped with a true loss-free condensate
drainage ensuring effective condensate drainage without any loss of compressed air. Constantly
communicating with the temperature probe in the evaporator, it adjusts the cooling pressure
according to the temperature of the air leaving the evaporator, thus saving energy.

Basic Components
• Digital Scroll Compressor
• Electronic Expansion Valve
• Variable Speed Fan Motor
• Well-engineered Control Algorithm
• Cutting-Edge Technology Electronic Controller

10
 Capacity Voltage
MODEL Ref. Gas Type Connection Filter Set
(m³/min) (V/ph/Hz)

HRD DS 120 15,50 400V/3/50 R134a 2" GKON 1205 MX+MY

HRD DS 130 20,00 400V/3/50 R134a 2" GKON 1205 MX+MY

HRD DS 140 23,13 400V/3/50 R134a 3" GKON 1805 MX+MY

HRD DS 150 30,00 400V/3/50 R134a 3" GKON 1805 MX+MY

HRD DS 170 46,25 400V/3/50 R134a 3" GKON-HC-2775 MX+MY

HRD DS 180 55,50 400V/3/50 R134a DN100 GKON-HC-2775 MX+MY

HRD DS 190 65,25 400V/3/50 R134a DN100 GKON-HC-5850 MX+MY

HRD DS 200 84,75 400V/3/50 R134a DN100 GKON-HC-5850 MX+MY

HRD DS 210 97,50 400V/3/50 R134a DN100 GKON-HC-5850 MX+MY

HRD DS 220 116,25 400V/3/50 R134a DN150 GKON-HC-5850 MX+MY

HRD DS 230 131,25 400V/3/50 R134a DN150 -

HRD DS 240 150,00 400V/3/50 R134a DN150 -

HRD DS 250 175,00 400V/3/50 R134a DN200 -

HRD DS 260 208,33 400V/3/50 R134a DN200 -

What Makes HRD DS so energy efficient and cost effective?

Dryers with digital scroll technology based on the standard refrigerated type dryer can automatically switch to
load or unload depending on real-time compressed air demand. This features makes the HRD DS series much
more energy-efficient than all other types of refrigerated air dryers.

COMPRESSED AIR DRYERS

11
 ICE CUBE STATIC 50-130
HIC COMPRESSED AIR DRYERS m3/h

HIC Series dryers use a static condenser eliminating the need for a fan. They therefore work
quietly and use little electricity. Compact and durable, HIC Series dryers have a long life span
and require little servicing.

Advantages
• Simple design takes up little space and delivers years of service-free operation
• Static condenser offers superior energy savings
• Efficient refrigerant compressor with low presure drop
• Low pressure loss
• +7°C dew point
• Wide condenser design eliminates condenser blockages
• Standard expansion valve
• 3-in-1 heat exchanger design
CORRECTION FACTORS FOR HIC SERIES
(air/air - air/refrigerant - water separator) Inlet Temperature oC 30 35 40 45 50 60 - -
• Easy-to-service auto-drain F1 1,29 1 0,92 0,78 0,65 0,45 - -
• High-pressure switch Ambient Temperature C o
20 25 30 35 40 45 50 -

• No loss of compressed air (Zero Loss) F2 1,05 1 0,98 0,93 0,84 0,76 0,7 -

• Uses less refrigerant than equivalents, Presure (Barg) 4 6 7 8 10 12 14 16

F3 0,8 0,94 1 1,04 1,11 1,16 1,22 1,25
environmentally friendly
Correction Formula: Dryer Capacity = Air Delivery Capacity of the Compressors / F1 / F2 / F3

Max. Working Capacity Connection Refrigerant Pressure Dimensions (mm) Weight

Model Voltage Filter Set
Pressure (bar) (m3/h) Size Gas Drop Length Width Height (kg)

HIC 50 16 50 230/1/50 1/2" R-134a HGKON 55 MX+MY 140 396 366 520 21

HIC 70 16 70 230/1/50 1/2" R-134a HGKON 75 MX+MY 170 396 366 520 23

HIC 100 16 100 230/1/50 3/4" R-134a HGKON 75 MX+MY 200 396 366 520 25

HIC 130 16 130 230/1/50 3/4" R-134a HGKON 155 MX+MY 180 396 366 758 34

12
 0,52-3,53 REFRIGERATED TYPE HIGH
m3/min TEMPERATURE COMPRESSED AIR DRYER HRD H

High temperature air dryers are fitted with an aftercooler to lower the inlet temperature of the
compressed air. This ensures effective dew-point management.

Key Features
• High operating inlet temperature
• Integrated condenser
• Independent air-cooled aftercooler
• Moisture separator
• Automatic drain
• Environmentally friendly R134a refrigerant
• Increased compressor life span
• Operate in high ambient temperatures
• Excellent insulation
• Easy to assemble and maintain CORRECTION FACTORS FOR HRD H SERIES

Pressure (bar) 4 5 6 7 8 8,5 10 11 12 13 14 16

F1 0,70 0,75 0,80 0,83 0,86 0,90 0,93 0,96 1 1,1 1,12 1,15

Ambient Temperature oC 24 29 35 38 40 46 49 - - - - -

F2 1,10 1,07 1,03 1,00 0,96 0,82 0,55 - - - - -

Inlet Temperature C
o
32 38 65 82 93 98 104 - - - - -
F3 1,30 1,27 1,06 1,00 0,85 0,78 0,75 - - - - -

Correction Formula: Dryer Capacity = Air Delivery Capacity of the Compressors / F1 / F2 / F3

Max. Pressure Capacity Dimensions (mm)

Connection Voltage Weight
COMPRESSED AIR DRYERS

Model Controller Refrigerant Type

Size (V/ph/Hz) (kg)
bar psi m3/min cfm Length Width Height

HRD H 31 16 232 0,52 18 G ½” 230/ 1 /50 445 445 955 62 DigiPro R134a

HRD H 52 16 232 0,87 31 G ½” 230/ 1 /50 445 445 955 62 DigiPro R134a

HRD H 75 16 232 1,25 44 G ½” 230/ 1 /50 445 445 955 63 DigiPro R134a

HRD H 106 16 232 1,77 62 G ¾” 230/ 1 /50 445 445 955 64 DigiPro R134a

HRD H 160 16 232 2,67 94 G ¾” 230/ 1 /50 625 510 910 88 DigiPro R134a

HRD H 212 16 232 3,53 125 G ¾” 230/ 1 /50 625 510 910 97 DigiPro R134a

13
 REFRIGERATED TYPE CYCLING 8,25-208,3
HRC (THERMAL MASS) AIR DRYERS m3/min

These types of dryers consume energy dependent on air flow. The dryer’s cooling system cools
the water-glycol mixture down to 1°C and holds this mixture in a stainless steel container.
A small pump circulates the water-glycol mixture to cool the compressed air. The cooling
system’s compressor turns off when the mixture reaches the required temperature resulting in
considerable energy savings.

Advantages
• Energy savings wiht capacity control
• 3°C dew point
• Very low pressure drop
• Suitable for tropical conditions
• Environmentally friendly R134a refrigerant
• Large condenser
• Operates at 60°C inlet temperature and in 50°C
ambient temperature
• Stainless steel components
• High efficiency

14
 Max. Pressure Capacity Dimensions (mm)
Connection Voltage Weight Refrigerant
Model Filter Set Controller
Size (V/ph/Hz) (kg) Type
bar psi m3/min cfm Length Width Height

HRC 495 16 232 8,25 291 G 2” HGKON805 MX+MY 230 / 1 / 50 855 725 1505 178 DigiPro R134a

HRC 623 16 232 10,4 366 G 2” HGKON1205 MX+MY 230 / 1 / 50 855 725 1505 184 DigiPro R134a

HRC 930 16 232 15,5 547 G 2” HGKON1205 MX+MY 230 / 1 / 50 830 730 1765 242 DigiPro R134a

HRC 1200 16 232 20,0 706 G 2” HGKON1205 MX+MY 400 / 3 /50 830 730 1765 253 ESD-3 R134a

HRC 1388 16 232 23,1 817 G 3” HGKON-HC-1805 MX+MY 400 / 3 /50 1150 800 1740 295 ESD-3 R134a

HRC 1800 16 232 30,0 1059 G 3” HGKON-HC-1805 MX+MY 400 / 3 /50 1150 800 1740 310 ESD-3 R134a

HRC 2500 16 232 41,7 1471 G 3” HGKON-HC-1805 MX+MY 400 / 3 /50 1315 880 1790 411 ESD-3 R134a

HRC 2775 16 232 46,3 1633 G 3” HGKON-HC-2275 MX+MY 400 / 3 /50 1315 880 1790 443 ESD-3 R134a

HRC 3330 16 232 55,5 1960 DN100 HGKON-HC-2275 MX+MY 400 / 3 /50 1400 850 1840 537 ESD-3 R134a

HRC 3915 16 232 65,3 2304 DN100 - 400 / 3 /50 1400 850 1840 557 ESD-3 R134a

HRC 5085 16 232 84,8 2993 DN100 - 400 / 3 /50 1620 1080 1995 737 ESD-3 R134a

HRC 5850 16 232 97,5 3443 DN100 - 400 / 3 /50 1620 1080 1995 760 ESD-3 R134a

HRC 6975 16 232 116,3 4105 DN150 - 400 / 3 /50 2190 1065 2025 941 ESD-3 R134a

HRC 7875 16 232 131,3 4634 DN150 - 400 / 3 /50 2190 1065 2025 963 ESD-3 R134a

HRC 9000 16 232 150 5297 DN150 - 400 / 3 /50 2900 1200 2120 1025 ESD-3 R134a

HRC 10500 16 232 175 6179 DN200 - 400 / 3 /50 2900 1200 2120 1162 ESD-3 R134a

HRC 12500 16 232 208,3 7356 DN200 - 400 / 3 /50 2550 1550 2170 1480 ESD-3 R134a

Correction Formula: Dryer Capacity = Air Delivery Capacity of the Compressors / F1 / F2 / F3

CORRECTION FACTORS FOR HRC SERIES

Pressure (bar) 4 6 7 8 10 12 14 16

F1 0,80 0,94 1 1,04 1,11 1,16 1,22 1,25

Ambient Temperature oC 20 25 30 35 40 50 - -

F2 1,05 1 0,98 0,93 0,84 0,70 - -

Inlet Temperature C o
30 35 40 45 50 60 - -

F3 1,29 1 0,92 0,78 0,65 0,45 - - COMPRESSED AIR DRYERS

15
 MODULAR ADSORPTION 0,08-30,0
HMD COMPRESSED AIR DRYERS m3/min

HMD model chemical dryers use a modular design for a lightweight, compact body. Having
half the size and weight of traditional twin-tower chemical dryers, they provide users with the
advantage of flexible installation. This is one of the chemical air dryer models with the lowest
pressure drop in the world with its highly engineered inlet valve and discharge manifold
design.

Advantages
• Low footprint, lightweight, compact design
• Corrosion-resistant aluminium structure
• Problem-free and reliable electronic control
• Can be mounted on the floor, bench, or wall
• Suitable layout for any workplace
• Easy to install and maintain
• High efficiency and flexibility
• Energy efficient
• Dew point from -40°C to -70°C (optional)

16
 Max.
Pressure Capacity Voltage Dimensions (mm) Weight
Connection
MODEL Filter Set Controller
Size
bar psi m3/min cfm (V/ph/Hz) Length Width Height kg
Crouzet
HMD 3 16 232 0,08 3 G 1/2" HGO20 MX+MY+MP 230/1/50-60 336 320 558 17 Millenium 3

Crouzet
HMD 5 16 232 0,17 6 G 1/2" HGO20 MX+MY+MP 230/1/50-60 320 320 633 19 Millenium 3

Crouzet
HMD 10 16 232 0,33 12 G 1/2" HGO20 MX+MY+MP 230/1/50-60 320 320 908 27 Millenium 3

Crouzet
HMD 15 16 232 0,42 15 G 1/2" HGO25 MX+MY+MP 230/1/50-60 350 370 808 31 Millenium 3

Crouzet
HMD 20 16 232 0,58 21 G 1/2" HGO50 MX+MY+MP 230/1/50-60 350 370 1108 42 Millenium 3

Crouzet
HMD 25 16 232 0,75 26 G 1/2" HGO50 MX+MY+MP 230/1/50-60 350 370 1258 48 Millenium 3

Crouzet
HMD 30 16 232 0,83 29 G 1/2" HGO50 MX+MY+MP 230/1/50-60 350 370 1508 54 Millenium 3

Crouzet
HMD 40 16 232 1,17 41 G 1 1/2" HGO100 MX+MY+MP 230/1/50-60 495 410 1250 71 Millenium 3

Crouzet
HMD 50 16 232 1,42 50 G 1 1/2" HGO100 MX+MY+MP 230/1/50-60 495 410 1400 78 Millenium 3

Crouzet
HMD 60 16 232 1,67 59 G 1 1/2" HGO100 MX+MY+MP 230/1/50-60 495 410 1750 92 Millenium 3

Crouzet
HMD 75 16 232 2,17 77 G 1 1/2" HGO150 MX+MY+MP 230/1/50-60 622 430 1300 120 Millenium 3

Crouzet
HMD 100 16 232 2,83 100 G 1 1/2" HGO200 MX+MY+MP 230/1/50-60 622 430 1450 133 Millenium 3

Crouzet
HMD 120 16 232 3,33 118 G 1 1/2" HGO200 MX+MY+MP 230/1/50-60 622 430 1750 152 Millenium 3

Crouzet
HMD 180 16 232 5,00 177 G 1 1/2" HGO300 MX+MY+MP 230/1/50-60 734 410 1499 186 Millenium 3

Crouzet
HMD 240 16 232 6,67 235 G 1 1/2" HGO500 MX+MY+MP 230/1/50-60 889 410 1497 235 Millenium 3

Crouzet
HMD 340 16 232 9,6 340 2" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 400 16 232 11,3 400 2" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 500 16 232 14,2 500 2" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 590 16 232 16,7 590 2" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 735 16 232 20,8 735 3" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 890 16 232 25,0 890 3" * 230/1/50-60 * * * * Millenium 3

Crouzet
HMD 1060 16 232 30,0 1060 3" * 230/1/50-60 * * * * Millenium 3

* Please contact the sales consultant

CORRECTION FACTORS FOR HMD SERIES

HMD Dryer Sizing Example;
Pressure (bar) 4,5 5 6 7 8 9 10 11 12 13 14 15 If a compressor delivers 2,0 m3/min at 10 bar, the
dryer inlet temperature is 40 OC. please choose your
F1 0,69 0,75 0.88 1 1,12 1,25 1,37 1,50 1,62 1,74 1,87 1,99 dryer as follows;

Inlet Temperature (oC) 20 25 30 35 40 45 50 - - - - - Dryer Capacity = 2,0 / 1,37 / 0,80 = 1,82 m3/min

F2 1 1 1 1 0,80 0,73 0,59 - - - - The correct dryer model for this application is HMD 75.

Correction Formula: Dryer Capacity = Air Delivery Capacity of the Compressors / F1 / F2

COMPRESSED AIR DRYERS

PRE FILTER (X) FINE FILTER (Y) PARTICLE FILTER (P) ACTIVATED CARBON
FILTER (A)
Efficiency rating:
Efficiency rating: Efficiency rating: Efficiency rating:
5 Micron particle
1 Micron particle 0.01 Micron particle 0.01 Micron particle
removal
removal & 0.5mg/m3 removal & 0.01mg/m3 removal & 0.003 mg/m3
(removes desiccant
oil removal oil removal oil removal
particles after the dryer)

17
 DESICCANT COMPRESSED 100-1250
HMD-VP AIR DRYERS m3/h

The HMD-VP Series modular, vacuum purge heatless desiccant air dryers remove water vapour
from the compressed air, stop corrosion, and prevent the growth of micro-organisms when
supplying the clean air crucial for production. HMD-VP Series air dryers efficiently and reliably
supply the system with high-quality dry air with a dew point of -40 °C or optionally a dew point
of -70 °C. This extends the machinery’s life span, keeps maintenance costs to a minimum, and
results in safe and healthy production. The new vacuum purge technology minimises air loss
during regeneration and optimises production levels.

Areas of Use
• Food and Beverage
• Pharmaceutical
• Automotive
• Electronic
• All industries requiring a dew point of
-40°C or optional -70°C.

18
 Max. Working
Capacity Vacuum Pump Voltage
Model Connection Size Pressure

(m3/h) (kW) (V) (bar)

HMD-VP-60 100 1,1 1 1/2" 400/3/50 16

HMD-VP-75 130 1,1 1 1/2" 400/3/50 16

HMD-VP-100 170 1,3 1 1/2" 400/3/50 16

HMD-VP-120 200 2,2 1 1/2" 400/3/50 16

HMD-VP-180 300 2,2 1 1/2" 400/3/50 16

HMD-VP-240 400 3 1 1/2" 400/3/50 16

HMD-VP-340 575 4 1 1/2" 400/3/50 16

HMD-VP-400 680 4 2" 400/3/50 16

HMD-VP-500 850 5,5 2" 400/3/50 16

HMD-VP-590 1000 5,5 2" 400/3/50 16

HMD-VP-740 1250 7,5 3" 400/3/50 16

COMPRESSED AIR DRYERS

19
 HEATLESS ADSORPTION 2,17-180,0
HDA COMPRESSED AIR DRYERS m3/min

Designed to supply clean and very dry air for critical applications. They have a constant dew
point of -40°C (-70°C optional).

They come with inlet and outlet line filters to keep the air flow clean and to protect the
chemical mixture inside the tanks.

Advantages
• Uninterrupted and perfect operation
• -40°C (-70°C optional) pressurized dew point
• Optional dew point monitoring and control
• 16 and 40 bar working pressure options
• Constant dew point
• Easy-to-use control panel
• Touchscreen interface
• User friendly
• Different language options

20
 Max.
Pressure Capacity Dimensions (mm) Weight
Connection Voltage
MODEL Filters Controller
Size
bar psi m3/min cfm V/ph/Hz Length Width Height kg

HDA 130 10 145 2,17 77 G 1" GKO150 MX+MY+MP 230/1/50-60 814 600 1312 160 Crouzet Millenium 3

HDA 185 10 145 3,08 109 G 1" GKO200 MX+MY+MP 230/1/50-60 806 600 1566 180 Crouzet Millenium 3

HDA 250 10 145 4,17 147 G 1" GKO250 MX+MY+MP 230/1/50-60 772 760 1580 200 Crouzet Millenium 3

HDA 300 10 145 5,00 177 G 1 1/2" GKO300 MX+MY+MP 230/1/50-60 900 690 1558 250 Crouzet Millenium 3

HDA 360 10 145 6,00 212 G 1 1/2" GKO500 MX+MY+MP 230/1/50-60 900 690 1558 250 Crouzet Millenium 3

HDA 440 10 145 7,33 259 G 1 1/2" GKO500 MX+MY+MP 230/1/50-60 900 698 1759 340 Crouzet Millenium 3

HDA 575 10 145 9,58 338 G 1 1/2" GKO600 MX+MY+MP 230/1/50-60 900 680 1991 500 Crouzet Millenium 3

HDA 680 10 145 11,3 400 G 2" GKO851 MX+MY+MP 230/1/50-60 960 680 2216 535 Crouzet Millenium 3

HDA 850 10 145 14,2 500 G 2" GKO851 MX+MY+MP 230/1/50-60 1016 857 2277 750 Crouzet Millenium 3

HDA 1000 10 145 16,7 589 G 2" GKO1210 MX+MY+MP 230/1/50-60 1075 1010 2386 755 Schneider

HDA 1250 10 145 20,8 736 DN80 GKO1820 MX+MY+MP 230/1/50-60 1294 1100 2413 1000 Schneider

HDA 1500 10 145 25,0 883 DN80 GKO1820 MX+MY+MP 230/1/50-60 1300 1010 2547 1050 Schneider

HDA 1800 10 145 30,0 1059 DN80 GKO1820 MX+MY+MP 230/1/50-60 1513 1110 2479 1215 Schneider

HDA 2200 10 145 36,7 1295 DN80 GKO2220 MX+MY+MP 230/1/50-60 1460 1110 2793 1550 Schneider

HDA 2700 10 145 45,0 1589 DN80 GKO2700 MX+MY+MP 230/1/50-60 1533 1252 2831 1890 Schneider

HDA 3200 10 145 53,3 1883 DN100 GKO3200 MX+MY+MP 230/1/50-60 1653 1212 3054 2240 Schneider

HDA 3600 10 145 60,0 2119 DN100 GKO4300 MX+MY+MP 230/1/50-60 1653 1210 3268 2330 Schneider

HDA 4400 10 145 73,3 2590 DN100 GKO4300 MX+MY+MP 230/1/50-60 1905 1535 2910 3000 Schneider

HDA 5000 10 145 83,3 2943 DN150 F6500 MX+MY+MP 230/1/50-60 1843 1714 3382 3180 Schneider

HDA 6300 10 145 105,0 3708 DN150 F6500 MX+MY+MP 230/1/50-60 2114 1693 3328 3450 Schneider

HDA 7200 10 145 120,0 4238 DN150 F8500 MX+MY+MP 230/1/50-60 2518 1795 3047 3600 Schneider

HDA 8800 10 145 146,7 5179 DN150 F8500 MX+MY+MP 230/1/50-60 2518 1795 3341 3850 Schneider

HDA 10800 10 145 180,0 6357 DN200 F11000 MX+MY+MP 230/1/50-60 2583 1875 3747 4200 Schneider

CORRECTION FACTORS FOR HDA DRYERS

HDA Dryer Sizing Example;
If a compressor delivers 10 m3/min at 6 bar, the dryer
4.5 5 6 7 8 9 10 inlet temperature is 40 OC. please choose your dryer
Bar as follows;
0,69 0,75 0,88 1 1,12 1,25 1,37

20 25 30 35 40 45 50 Dryer Capacity = 10 / 0,88 / 0,80 = 14,2 m3/min

Inlet Temp. oC
1 1 1 1 0,80 0,73 0,59 The correct dryer model for this application is DA 850.
COMPRESSED AIR DRYERS

PRE FILTER (X) FINE FILTER (Y) PARTICLE FILTER (P) ACTIVATED CARBON
FILTER (A)
Efficiency rating:
Efficiency rating: Efficiency rating: Efficiency rating:
5 Micron particle
1 Micron particle 0.01 Micron particle 0.01 Micron particle
removal
removal & 0.5mg/m3 removal & 0.01mg/m3 removal & 0.003 mg/m3
(removes desiccant
oil removal oil removal oil removal
particles after the dryer)

21
 BLOWER PURGE ADSORPTION 14,2-267,0
HBP COMPRESSED AIR DRYERS m3/min

They use a blower to draw in the ambient air and pass it through a heater. The heated air is
sent in the opposite direction to the drying flow. This removes the moisture from the chemical
substance pores. The advanced control system continuously monitors dew point and adjusts
the temperature. This results in energy savings. The heater is insulated for high energy
efficiency.

Advantages
• Dew point monitoring and control
• Computer control
• Status, alarm, and pressure display
• Remote start and stop
• Low-pressure alarm
• High-pressure switches and alarms
• Externally heated or heat-free operation
• Reliable electronic control units
• User friendly and Different language options

22
 Max.
Pressure Capacity Connec- Voltage Dimensions (mm)
MODEL tion Filter Set Controller
Size
bar psi m /min
3
cfm V/ph/Hz Length Width Height

HBP 850 10 145 14,2 500 G 2" GKO851 MX+MY+MP(H) 400 / 3 / 50 1296 1180 2299 Schneider

HBP 1000 10 145 16,7 589 G 2" GKO1210 MX+MY+MP(H) 400 / 3 / 50 1200 1310 2415 Schneider

HBP 1250 10 145 20,8 736 DN80 GKO1820 MX+MY+MP(H) 400 / 3 / 50 1610 1270 2468 Schneider

HBP 1500 10 145 25,0 883 DN80 GKO1820 MX+MY+MP(H) 400 / 3 / 50 1610 1270 2563 Schneider

HBP 1800 10 145 30,0 1059 DN80 GKO1820 MX+MY+MP(H) 400 / 3 / 50 1563 1515 2479 Schneider

HBP 2200 10 145 36,7 1295 DN80 GKO2220 MX+MY+MP(H) 400 / 3 / 50 1563 1455 2789 Schneider

HBP 2700 10 145 45,0 1589 DN80 GKO2700 MX+MY+MP(H) 400 / 3 / 50 1615 1514 2836 Schneider

HBP 3200 10 145 53,3 1883 DN100 GKO3200 MX+MY+MP(H) 400 / 3 / 50 1710 1660 3054 Schneider

HBP 3600 10 145 60,0 2119 DN100 GKO4300 MX+MY+MP(H) 400 / 3 / 50 1710 1660 3268 Schneider

HBP 4400 10 145 73,3 2590 DN100 GKO4300 MX+MY+MP(H) 400 / 3 / 50 1975 2492 2910 Schneider

HBP 5000 10 145 83,3 2943 DN 150 F6500 MX+MY+MP(H) 400 / 3 / 50 2045 2560 3382 Schneider

HBP 6300 10 145 105,0 3708 DN150 F6500 MX+MY+MP(H) 400 / 3 / 50 2090 2963 3328 Schneider

HBP 7200 10 145 120,0 4238 DN150 F8500 MX+MY+MP(H) 400 / 3 / 50 2020 3363 3047 Schneider

HBP 8800 10 145 146,7 5179 DN150 F8500 MX+MY+MP(H) 400 / 3 / 50 2020 3363 3341 Schneider

HBP 10800 10 145 180,0 6357 DN200 F11000 MX+MY+MP(H) 400 / 3 / 50 2492 3481 3765 Schneider

HBP 12000 10 145 200,0 7063 DN200 F11000 MX+MY+MP(H) 400 / 3 / 50 * * * Schneider

HBP 16000 10 145 267,0 9429 DN200 F14000 MX+MY+MP(H) 400 / 3 / 50 * * * Schneider

Dew point monitoring and control are standard.

* Please contact the sales consultant.

HBP Dryer Sizing Example;

CORRECTION FACTORS FOR HBP AIR DRYERS
If a compressor delivers 35 m3/min at 6 bar, the
4.5 5 6 7 8 9 10 dryer inlet temperature is 40 OC. please choose
Bar your dryer as follows;
0,69 0,75 0,88 1 1,12 1,25 1,37
Dryer Capacity = 35 / 0,88 / 0,80 = 49,7 m3/min
20 25 30 35 40 45 -
Inlet Temp. C
o
The correct dryer model for this application is
1 1 1 1 0,80 0,73 - HBP 3200.

PRE FILTER (X) FINE FILTER (Y) PARTICLE FILTER (P) ACTIVATED CARBON
FILTER (A)
COMPRESSED AIR DRYERS

Efficiency rating:
Efficiency rating: Efficiency rating: Efficiency rating:
5 Micron particle
1 Micron particle 0.01 Micron particle 0.01 Micron particle
removal
removal & 0.5mg/m3 removal & 0.01mg/m3 removal & 0.003mg/m3
(removes desiccant
oil removal oil removal oil removal
particles after the dryer)

23
 CATALYTIC 1-65
HCC CONVERTERS Nm3/min

The new HCC Series uses a catalytic reaction to remove the oil in the compressed air. HCC uses a
catalytic oxidisation process to convert the oil and hydrocarbons in the compressed air into H2O and
CO2.

HCC Catalytic Converters deliver Class 0 oil-free compressed air in accordance with the ISO 8573-1
International Standard. The heat-reactivated catalyst lowers the oil content in the compressor’s air
outlet to less than 0.0025 mg/m3.

Basic Components
• Low investment and operating costs
(compared with oil-free compressors)
• Low maintenance costs
• Longer periods between filter replacement
• No extra expense required to separate oil
condensate
• Avoids production standby and shut-downs
• Consistent air quality level throughout the
catalyst’s life span
• Longer service life for equipment
• Reduced energy consumption
(max. 0.01 kWh/m3 at max. load)

24
 Max. Working Pressure Total Installed Specific Power
Air Capacity
Connection Pressure Drop Power Consumption
Model Voltage Fuse Amp.
Size
(Nm³/min) (bar) (mbar) (kw) (kWh/m³)

HCC 11 1 1/2" 16 ≤ 400 230/1/50-60 1,2 16 0,009

HCC 22 2 3/4" 16 ≤ 400 230/1/50-60 2,5 16 0,009

HCC 55 5 1 1/4" 16 ≤ 400 400/3/50-60 5 20 0,007

HCC 75 7 1 1/2" 16 ≤ 400 400/3/50-60 5 20 0,006

HCC 110 10 1 1/2" 16 ≤ 400 400/3/50-60 10 20 0,005

HCC 160 15 2" 16 ≤ 400 400/3/50-60 10 20 0,005

HCC 210 20 2 1/2" 16 ≤ 400 400/3/50-60 15 50 0,005

HCC 330 30 2 1/2" 16 ≤ 400 400/3/50-60 21 50 0,005

HCC 430 43 DN 80 16 ≤ 400 400/3/50-60 28 50 0,005

HCC 650 65 DN 100 16 ≤ 400 400/3/50-60 28 50 0,005

Basic Working Principle of HCC Series Catalytic Converter

The specially designed catalyst in the HCC vessels is first heated to a specific temperature. The hydrocarbons
are separated from the oily inlet air when it enters the heated vessel. The oxygen molecules on the surface of
the catalyst react with these hydrocarbons turning them into water and CO2. Then, the completely oil-free
Class 0 compressed air is cooled by a heat exchanger and sent directly into the system without the need for any
additional processing.

Standard Oil Indicator

Producers want to be sure that their processes are being supplied with oil-free compressed air. The HCC Series
has an oil indicator fitted as standard to prove that the exiting compressed air is free of oil.

MOI Oil Sensor

HCC Series Catalytic Converters come with an optional MOI Sensor. The MOI Sensor reads the oil level in the air
and shows this on a digital display. The alarm level can be set to halt the entire system and protect the process if
there is oil in the air.” COMPRESSED AIR DRYERS

25
 FILTRATION
AND
SEPARATION

HGO - Compressed Airline Filters.................................................................................................... 28

HGON - Compressed Airline Filters................................................................................................ 30

HGO - High Pressure Airline Filters................................................................................................. 32

HG MSS - Compressed Air Sterile Filters..................................................................................... 33

HF - Flanged Compressed Air Filters............................................................................................. 34

HG WS - Water Separators.................................................................................................................... 36

HF WS - Water Separators.................................................................................................................... 37

HACT - Activated Carbon Towers..................................................................................................... 38

HAR - Air Receiver....................................................................................................................................... 39

26
27
COMPRESSED AIR DRYERS
 COMPRESSED 0,42-45,0
HGO AIRLINE FILTERS m3/min

They prevent unwanted substances such as dust particles and oil particles in the compressed air
coming from the compressor from damaging equipment, pipes, and the quality of the end product.

Advantages
• More convenient for the end user
• Robust and durable
• High efficiency
• Low pressure drop
• Easy to maintain
• High-protected filter
• Electronic, external, loss-free, and manual drain options
• Durable element structure
• High-efficiency drainage layer

28
 Max.
Capacity Dimensions (mm)
Pressure Connection
MODEL Element Model
Size
bar psi m3/min cfm A B C D

HGO 25 20 290 0,42 15 G 1/2" MO25 102 214,5 192,5 45

HGO 50 20 290 0,83 29 G 1/2" MO50 102 214,5 192,5 45

HGO 100 20 290 1,67 59 G 1/2" MO100 102 252,5 230,5 45

HGO 150 20 290 2,50 88 G 1" MO150 123 297,5 270,5 45

HGO 200 20 290 3,33 118 G 1" MO200 123 361,5 334,5 45

HGO 250 20 290 4,17 147 G 1" MO250 123 401,5 374,5 45

HGO 300 20 290 5,00 177 G 1 1/2" MO300 123 458 422,5 45

HGO 500 20 290 8,33 294 G 1 1/2" MO500 123 488 452,5 45

HGO 600 20 290 10,0 353 G 1 1/2" MO600 123 533 497,5 45

HGO 851 20 290 14,2 501 G 2" MO851 160 622,5 581 45

HGO 1210 20 290 20,2 712 G 2" MO1210 160 692,5 651 45

HGO 1520 20 290 25,3 895 G 3" MO1520 194 725,5 669 45

HGO 1820 20 290 30,3 1071 G 3" MO1820 194 865 808 45

HGO 2220 20 290 37,0 1307 G 3" MO2220 194 919,5 863 45

HGO 2700 20 290 45,0 1589 G 3" MO2700 194 1063,5 1007 45

CORRECTION FACTORS FOR HGO COMPRESSED AIR FILTER SERIES

Operating Pressure (bar) 1 3 5 7 9 11 13 15 16 20

PSIG 15 44 73 100 131 160 189 218 232 290

Correction Factor 0,5 0,71 0,87 1 1,12 1,22 1,32 1,44 1,50 1,63

HGO Compressed Air Filter Sizing Example;

If a compressor delivers 24 m3/min at 11 psi please

choose your Filter model as follow: 24 m3/min /
1,22=19,7m3/min your model is HGO 1210. FILTRATION AND SEPARATION

29
 COMPRESSED 35-2700
HGON AIRLINE FILTERS m3/h

Hertz’s HGON Series of Industrial Air Filters offer its compressed air users high-efficiency filtration
with low pressure losses. Having more port sizes, it delivers a reliable performance, minimising air
contamination in compressed air systems. The innovative “Zero Clearance” design allows users to
assemble and replace the filter and other components in any compressed air unit easily. Constructed
of aluminium, the HGON series is built to last, meets PED and ISO 8573 standards, and is extremely
economical.

Advantages
• Air flow from 35 m3/h to 5400 m3/h
• NPT/BSP pipe sizes range from ¼” to 4” inclusive
• Pore-free aluminium construction
• Options:
• “Standard Drain” with a ½” connector or
• “Drain-free” with a ½” connector and adaptor.
• Neatly designed connection clips and wall apparatus
• ISO 8573-compliant production
• Zero clearance
• Anodised
• Locking System Indicator

30
 Flow Rate Max. Working Housing Dimensions (mm)
Element
MODEL Connection Size Pressure
Model
(m3/h) cfm (bar) A B C D E

HGON-35 1/4" 3/8" 1/2" 35 21 20 MON35 90 36,5 214 192 19

HGON-55 1/4" 3/8" 1/2" 55 33 20 MON55 90 36,5 251,5 230 19

HGON-70 3/8" 1/2" - 70 42 20 MON70 128 45 273 249,5 32

HGON-100 3/8" 1/2" - 100 60 20 MON100 128 45 302,5 279 32

HGON-125 3/8" 1/2" - 125 75 20 MON125 128 45 343 319,5 32

HGON-150 3/4" 1" - 150 90 20 MON150 140 45 369 334,5 31

HGON-225 3/4" 1" - 225 135 20 MON225 140 45 398 364,5 31

HGON-300 1 1/4” 1 1/2” - 300 180 20 MON300 140 45 474 432 31

HGON-400 1 1/4" 1 1/2" - 400 240 20 MON400 140 45 564 522 31

HGON-500 1 1/4" 1 1/2" 2" 500 300 20 MON500 151 45 511 464,5 25

HGON-600 1 1/2" 1 1/2" 2" 600 360 20 MON600 151 45 626 579,5 25

HGON-800 1 1/4" 1 1/2" 2" 800 480 20 MON800 151 45 696 649,5 25

HGON-1000 1 1/4" 1 1/2" 2" 1000 600 20 MON1000 151 45 851 804,5 25

HGON-1200 1 1/4" 1 1/2" 2" 1200 720 20 MON1200 151 45 976 929,5 25

MON-
HGON-1550 2 1/2" 3" - 1550 930 20 240 45 707 659,5 25
HC1550
MON-
HGON-2000 2 1/2" 3" - 2000 1200 20 240 45 862 814,5 25
HC2000
MON-
HGON-2700 2 1/2" 3" - 2700 1620 20 240 45 987 939,5 25
HC2700

Head Clamping
Head clamping connects filters in series without the need for more
pipes and uses connection clamps to join multiple filters together. Wall-
mounting apparatus lets you fix the filters to the walls with ease.

Drainage Pipes
Drainage pipes support the flow of moisture.

Correction Factor
Multiply the model flow rate shown in the table below by the correction
factor corresponding to the working pressure to calculate the maximum
flow rate of the filter model.
FILTRATION AND SEPARATION

31
 HIGH PRESSURE 1,70-50,0
HHGO AIRLINE FILTERS m3/min

This model filters are produced in a weldless structure to withstand high pressures. High-pressure
test guarantee safe and efficient operation.t

Advantages
• Durable and compact
• Safe and efficient operation
• High performance
• Strong and reliable design
• Excellent high-pressure applications
• Product performance warranty
• Carbon steel filters designed for 350 bar (optional)
• Sufficient wall thickness
• High-pressure tested
• Anodised interior and exterior surfaces

Max.
Capacity Dimensions (mm)
Pressure Connection Element
MODEL
Size Model
bar psi m3/min cfm A B C D

HHGO 100 50 725 1,7 59 G 1/4" M25 113,4 115,4 25,75 155

HHGO 300 50 725 5,0 177 G 1/2" M50 113,4 115,4 25,75 158,5

HHGO 600 50 725 10,0 353 G 3/4" M100 109,4 115,4 32,25 207

HHGO 850 50 725 14,2 500 G 1" M150 133 138 37,35 250

HHGO 1200 50 725 20,0 706 G 1" M200 133 138 37,35 314

HHGO 1600 50 725 26,7 942 G 1 1/2" M250 128 138 44,4 368

HHGO 2500 50 725 41,7 1471 G 2" M2500 145 158 51,5 393

HHGO 3000 50 725 50,0 1766 G 2 1/2" M3000 160 178 57,6 386

32
 0,33-37,0 COMPRESSED AIR
m3/min STERILE FILTERS HG MSS

Advantages
• Specially designed for medical compressed air plants
• Partical removal down to 0.01 micron
• Suitable for steam sterilisation in an autoclave

Max. Pressure Capacity Connec- Dimensions (mm)

MODEL tion
bar psi m3/min cfm Size A B C D E

HG 20 MSS 16 232 0,33 12 G 1/4" 72 19 193 100 22

HG 25 MSS 16 232 0,42 15 G 1/4" 72 19 193 100 22

HG 40 MSS 16 232 0,67 24 G 3/8" 96 20 237 110 22

HG 50 MSS 16 232 0,83 30 G 3/8" 96 20 237 110 22

HG 100 MSS 16 232 1,67 59 G 1/2" 96 20 237 150 22

HG 150 MSS 16 232 2,50 88 G 3/4" 117 34 375 190 56

HG 200 MSS 16 232 3,33 118 G 3/4" 117 34 375 250 56

HG 250 MSS 16 232 4,17 147 G 1" 117 34 465 300 56

HG 300 MSS 16 232 5,00 177 G 1 1/4" 117 34 465 350 56

HG 500 MSS 16 232 8,33 294 G 1 1/4" 117 34 530 380 56

FILTRATION AND SEPARATION

HG 600 MSS 16 232 10,0 353 G 1 1/2" 117 34 530 425 56

HG 851 MSS 16 232 14,2 501 G 2" 170 64 722 480 56

HG 1210 MSS 16 232 20,2 712 G 2" 170 64 722 550 56

HG 1520 MSS 16 232 25,3 895 G 2 1/2" 235 72 760 430 56

HG 1820 MSS 16 232 30,3 1071 G 3" 235 72 760 550 56

HG 2220 MSS 16 232 37,0 1307 G 3" 235 72 760 600 56

33
 FLANGED COMPRESSED 1,70-50,0
HF AIR FILTERS m3/min

They filter unwanted substances in the compressed air before they go to the system.

Advantages
• Simple design to replacement to internal element
• Two external float drains for excellent drainage
• CE and ASME tank options
• Low pressure drop
• Durable epoxy powder coating and rust-preventing
anodised interior surface coating
• Strong welds
• Long service life

34
 Maximum
Capacity Connection Drain working Element Number of Housing Dimensions (mm)
Model Pressure
Size Port Size Model Elements
m3/min cfm bar A B C D E

HF 2400 40,0 1413 DN80 G ½” 14 M1200 2 450 1287 277 747 650

HF 3600 60,0 2119 DN100 G ½” 14 M1200 3 450 1317 277 767 650

HF 4800 80,0 2825 DN100 G ½” 14 M1200 4 530 1344 279 769 650

HF 7200 120,0 4238 DN150 G ½” 14 M1200 6 580 1425 331 769 650

HF 9600 160,0 5650 DN150 G ½” 14 M1200 8 650 1439 333 798 650

HF 12000 200,0 7063 DN200 G ½” 14 M1200 10 750 1504 345 825 650

HF 16800 280,0 9888 DN200 G ½” 14 M1200 14 800 1545 383 833 650

HF 19200 320,0 11301 DN250 G ½” 14 M1200 16 850 1583 417 862 650

HF 20400 340,0 12007 DN300 G ½” 14 M1200 17 850 1680 447 887 650

HF 27600 460,0 16245 DN350 G ½” 14 M1200 23 850 1778 487 917 650

HF 33600 560,0 19776 DN350 G ½” 14 M1200 28 850 1778 487 917 650

Pre General Oil Activated

Specifications
Filtering Purpose Removal Carbon

Grade P X Y A

Particle Removal (Micron) 5 1 0,01 0,01

Max. Oil carryover at 21oC (mg/m3) 5 0,5 0,01 0,003

Max. working Temperature (oC) 80 80 80 25

Max.working Pressure 16 16 16 16

Initial Pressure loss (mbar) 40 80 100 80

Pressure loss for element change (mbar) 700 700 700 700

Element colour code WHITE WHITE WHITE METAL SS

HF Compressed Air Filter Sizing Example;

CORRECTION FACTORS FOR HF COMPRESSED AIR FILTER
Operating Pressure (barg) 1 3 5 7 9 11 13 15 16 If a compressor delivers 140 m3/min at 11
bar please choose your Filter model as
PSIG 15 44 73 100 131 160 189 218 247 follow:
Correction Factor 0,5 0,71 0,87 1 1,12 1,22 1,32 1,44 1,57
140 m3/min / 1,22=114,8 m3/min your
model is F 7200.

NOTES
1) Grade A must not operate in oil saturated conditions. Min. clearance
for element
2) Grade A elements should be replaced periodically to suit the applications but must be changed at least every six months. change

3) Grade A will not remove certain gases including carbon monoxide and carbon dioxide. Please refer to works if in doubt.
4) Flow rates are based on a 7 bar operating Pressure, for flows at other. Pressures use correction factor given above.
FILTRATION AND SEPARATION

5) All filters are suitable for use with mineral and synthetic oils.
6) Other standards for flanged connections are available.
7) Direction of air flow, inside to out, through filter element

35
 WATER 0,4-36,7
HG WS SEPARATORS m3/min

Hertz water separators are designed to remove liquid water and some particulates in compressed air
at the compressor outlet. Their unique centrifugal effect separates heavier-than-air matter and the
low pressure drop makes them energy-efficient.

Advantages
Hertz’s HG WS water separators have 1/4” - 3” pipes for flow
rates of 2200 m3/h. Line filters should be used to remove
unwanted substances left in the compressed air after the
extremely efficient water separators.

Max. Pressure Capacity Dimensions (mm)

Connection
MODEL
bar psi m3/min cfm Size A B C D

HG 25 WS 16 232 0,4 15 G 1/4" 103 257,5 236 160

HG 100 WS 16 232 1,7 59 G 1/2" 103 257,5 236 210

HG 200 WS 16 232 3,3 118 G 3/4" 123 304 277 285

HG 300 WS 16 232 5,0 177 G 1" 123 304 277 380

HG 600 WS 16 232 10,0 353 G1 1/2" 123 320 285 470

HG 1200 WS 16 232 20,0 706 G 2" 160 484 443 560

HG 2200 WS 16 232 36,7 1295 G 3" 193 546 490 610

CORRECTION FACTORS FOR HG WS COMPRESSED AIR FILTER SERIES

Operating Pressure (barg) 1 3 5 7 9 11 13 15 16 20

PSIG 15 44 73 100 131 160 189 218 232 290

Correction Factor 0,5 0,71 0,87 1 1,12 1,22 1,32 1,44 1,57 1,63

36
 41,6-233,3 WATER
m3/min SEPARATORS HF WS

Hertz water separators are designed to remove liquid water and some particulates in compressed air
at the compressor outlet. Their unique centrifugal effect separates heavier-than-air matter and the
low pressure drop makes them energy-efficient.

Advantages
HF WS models have 3” - 8” pipes for flow rates up to 14.000
m3/h. Line filters should be used to remove unwanted
substances left in the compressed air after the extremely
efficient water separators.

Max. Pressure Capacity Connec- Dimensions (mm)

MODEL tion
bar psi m3/min cfm Size A B C D E F

HF 2500 WS 14 203 41,6 1471 DN80 200 934 450 75 280 1289

HF 3200 WS 14 203 53,3 1883 DN100 220 964 450 75 280 1319

HF 4300 WS 14 203 71,6 2531 DN100 220 928 530 75 280 1283

HF 6500 WS 14 203 108,3 3826 DN150 285 1092 580 75 280 1447
FILTRATION AND SEPARATION

HF 8500 WS 14 203 141,6 5003 DN150 285 1091 650 75 280 1446

HF 11000 WS 14 203 183,3 6474 DN200 340 1168 750 75 280 1523

HF 14000 WS 14 203 233,3 8240 DN200 340 1201 800 75 280 1556

37
 ACTIVATED 2,17-180,0
HACT CARBON TOWERS m3/min

Some industries require the compressed air to be clean of oil mist and the smell of oil. The HACT
series of activated carbon towers remove the oil mist and the smell from the compressed air.

Advantages CORRECTION FACTORS

•
Operating Pressure (bar) 1 3 5 7 9 10
Reduces the oil content in the compressed air to 0.003 mg/m³
• Provides high-quality air
PSIG 15 44 73 100 131 145

• Serves such sectors as hospital, pharma, food-drink, etc.

Correction Factor 0,5 0,71 0,87 1 1,12 1,15

Max. Pressure Capacity Connection Dimensions (mm)

MODEL
bar psi m3/min cfm Size Length Width Height
HACT 130 10 145 2,17 77 G 1" 347 450 1172
HACT 185 10 145 3,08 109 G 1" 450 563 1413
HACT 250 10 145 4,17 147 G 1" 430 601 1370
HACT 300 10 145 5,00 177 G 1 1/2" 500 649 1336
HACT 360 10 145 6,00 212 G 1 1/2" 500 649 1336
HACT 440 10 145 7,33 259 G 1 1/2" 500 648 1536
HACT 575 10 145 9,58 338 G 2" 469 604 1733
HACT 680 10 145 11,3 400 G 2" 550 540 1936
HACT 850 10 145 14,2 500 G 2" 580 600 1957
HACT 1000 10 145 16,7 589 DN80 657 638 1617
HACT 1250 10 145 20,8 736 DN80 708 880 2400
HACT 1500 10 145 25,0 883 DN80 708 880 2558
HACT 1800 10 145 30,0 1059 DN80 810 980 2423
HACT 2200 10 145 36,7 1295 DN80 810 1100 2600
HACT 2700 10 145 45,0 1589 DN100 910 1100 2758
HACT 3200 10 145 53,3 1883 DN100 866 1050 3023
HACT 3600 10 145 60,0 2119 DN100 866 1050 3237
HACT 4400 10 145 73,3 2589 DN150 1130 1250 2914
HACT 5000 10 145 83,3 2943 DN150 1130 1310 3420
HACT 6300 10 145 105,0 3708 DN150 1230 1410 3365
HACT 7200 10 145 120,0 4237 DN 150 1430 1575 3075
HACT 8800 10 145 146,7 5179 DN150 1430 1575 3369
HACT 10800 10 145 180,0 6356 DN200 1430 1650 3863

38
 100-10000 AIR
L RECEIVER HAR

Air tanks are used for storage in compressed air systems. They prevent pressure fluctuations in the
system and eliminate inefficiencies especially in fix speed compressor applications.

Volume Pressure Dimensions (mm) Connection

Model Configuration
L bar Diameter Height Inlet / Outlet
10 VERTICAL C/F C/F C/F
HAR 100 100
15 VERTICAL 324 1564 2 X G1”
10 VERTICAL C/F C/F C/F
HAR 200 200
15 VERTICAL 450 1618 G 1”
Advantages 10 VERTICAL 450 1918 G ¾”
HAR 300 300 15 VERTICAL 450 1918 G ¾”
• They allow the system to 40 VERTICAL 450 2012 G 1”
10 VERTICAL 642 1980 G 1”
respond quickly to high
HAR 500 500 15 VERTICAL 642 1970 G 1”
and sudden consumption 40 VERTICAL 642 2083 G 1 ¼”

• A key component of HAR 900 900 10 VERTICAL 800 2120 G 1 ½”

10 VERTICAL C/F C/F C/F
compressed air systems HAR 1000 1000 15 VERTICAL 850 2120 G 1 ½”
• Storage function 40 VERTICAL 850 2120 G 1 ½”

• Reduces system pressure

HAR 1800 1800
10
15
VERTICAL
VERTICAL
C/F
1150
C/F
2150
C/F
G 2”
fluctuations 40 VERTICAL C/F C/F C/F

• Increases efficiency 10 VERTICAL 1080 2566 G 2”

HAR 2000 2000 15 VERTICAL 1080 2566 G 2”
• Galvanized and stainless 15 VERTICAL 1150 2240 G 2”
steel options HAR 3000 3000
10 VERTICAL 1400 2370 G 2 ½”
FILTRATION AND SEPARATION

•
15 VERTICAL 1400 2370 G 2 ½”
Energy saving
10 VERTICAL 1400 3120 G 3”
• Highly durable with a long
HAR 4000 4000
15 VERTICAL 1400 3120 G 3”
10 VERTICAL 1400 3870 G 3”
service life HAR 5000 5000
15 VERTICAL 1400 3870 G 3”
10 VERTICAL 1500 3930 G 3”
HAR 6000 6000
15 VERTICAL 1500 3930 G 3”
10 VERTICAL 1750 4040 DN100
HAR 8000 8000
15 VERTICAL 1750 4040 DN100
10 VERTICAL 1900 4100 DN100
HAR 10000 10000
15 VERTICAL 1900 4100 DN100

39
 AIR
SEPARATION
SYSTEMS

HNG - Nitrogen Generators................................................................................................................. 44

HDX - Nitrogen Purifier Systems...................................................................................................... 48

40
41
COMPRESSED AIR DRYERS
 NITROGEN
HNG GENERATORS

PSA nitrogen generators are systems which separate and store nitrogen and use a CMS as an
adsorbent. The CMS (Carbon Molecular Sieve) allows nitrogen to pass through while absorbing oxygen
and water vapour molecules.

Advantages
• Used in the metal, chemical, plastic, and manufacturing industries,
• Simple, compact design and automation control
• 7/24 on-site nitrogen production
• Touchscreen display for monitoring and imaging
• Safety system
• Low noise levels when discharging
• Durable piston valves for a long life span
• Low cost and high performance
• Low maintenance costs
• Instantaneous operation

42
 APPLICATIONS

Application Metal Industry Chemical Industry

• Annealing of ferrous and non-ferrous metal • Transportation of raw material in storage tank
(Inert circumstance) • Container ventilation and prevention of explosion
• Metallurgical heat treatment (Carbonizing) in reaction tank
• Soldering / Brazing • Sealing of nitrogen in storage tank
• Plasma sheet metal cutters • Cleaning tank and container
• Inert gas in welding process • Pressure testing of pipe
• Sintering of metal powder

Production Process and Charge Nitrogen

Storage of Food Gas in Tire
• Storage of low oxygen CA or super low oxygen • Reducing noise re duction, improving fuel
• Charge of nitrogen gas in packing and efficiency, reducing tire unbal ance and improving
transportation of coffee, snack or dry nut driving comport

Plastic Purge
AIR SEPARATION SYSTEM

• Ejecting high Pressure gas (Sustaining vacuum, • Diluting or transposing gas or vapor to eliminate
shortening cooling time in Ejection) dangerous gas and oxidized substance
• Suppressing gas generation in ejection

43
 NITROGEN
HNG GENERATORS

REFERENCE CONDITIONS

Inlet Outlet Inlet air dewpoint

Ambient
Compressed Air Nitrogen 3 0C -40 0C
Temperature
Pressure Pressure (under 99.5 % purity) (above 99.5 % purity)

Refrigerant air dryer and activated Desiccant air dryer and activated
7,5 Bar (g) 6 Bar (g) 25 0C
carbon filter is required carbon filter is required

Free Nitrogen Delivery @ following purity level (Nm3/h)

Model
95% 97% 98% 99% 99,5% 99,90% 99,95% 99,99% 99,999%

HNG 10 2,7 2,2 1,9 1,5 1 0,8 0,7 0,5 0,2

Modular
HNG 20 4,40 3,5 3,1 2,4 2 1,3 1,1 0,8 0,4

HNG 35 8,10 6,5 5,6 4,4 3,5 2,3 2,0 1,4 0,7

HNG 60 13,5 10,8 9,4 7,3 6 3,8 3,4 2,4 1,2

HNG 95 23,3 18,6 16,2 12,6 10,4 6,6 5,9 4,1 2,0

HNG 120 31,0 24,8 21,6 16,8 13,9 8,8 7,8 5,5 2,7

HNG 150 38,0 30,4 26,4 20,6 17,0 10,8 9,6 6,7 3,3

HNG 250 60,5 48,3 42,1 32,7 27,1 17,2 15,2 10,6 5,3

HNG 330 80,0 63,9 55,7 43,3 35,8 22,8 20,1 14,1 7,0

HNG 450 108,2 86,4 75,2 58,5 48,4 30,8 27,2 19,0 9,5

HNG 510 123,9 99,0 86,2 67,1 55,5 35,3 31,2 21,8 10,9

HNG 570 137,6 109,9 95,7 74,5 61,6 39,2 34,6 24,2 12,1

HNG 730 180,1 143,9 125,3 97,5 80,6 51,3 45,3 31,6 15,8

HNG 910 220,3 176,0 153,2 119,2 98,6 62,7 55,5 38,7 19,3

Twin Tower
HNG 1110 267,8 214,0 186,3 145,0 119,9 76,2 67,4 47,0 23,5

HNG 1230 295,4 236,0 205,5 159,9 132,3 84,1 74,4 51,9 25,9

HNG 1370 327,4 261,5 227,7 177,2 146,6 93,2 82,4 57,5 28,7

HNG 1820 442,6 353,6 307,9 239,6 198,2 126,0 111,4 77,8 38,8

HNG 2050 516,2 412,4 359,0 279,4 231,1 146,9 130,0 90,7 45,3

HNG 2550 618,8 494,4 430,4 334,9 277,1 176,1 155,8 108,7 54,3

HNG 2950 763,2 609,8 530,9 413,1 341,8 217,2 192,1 134,1 67,0

HNG 3540 894,5 714,6 622,1 484,1 400,5 254,6 225,1 157,1 78,5

HNG 4160 1.031,4 824,1 717,4 558,3 461,9 293,6 259,6 181,2 90,5

HNG 5560 1.241,7 992,0 863,6 672,1 556,0 353,4 312,5 218,1 109,0

HNG 9170 2.048,0 1.636,1 1.424,3 1.108,4 917,0 582,9 515,5 359,7 179,7

HNG 11200 2.501,2 1.998,3 1.740,0 1.353,8 1.120,0 712,0 629,6 439,4 219,4

44
 Connections Dimensions (mm) Weight
Model Buffer Tank
Air Inlet Nitrogen Outlet Length Width Height Kg

HNG 10 26 L G ½” G ½” 670 500 1130 40

HNG 20 35 L G ½” G ½” 1043 596 1284 67

HNG 35 52 L G ½” G ½” 1082 689 1278 86

HNG 60 70 L G ½” G ½” 1100 890 1433 124

HNG 95 97 L G ½” G ½” 1659 760 1485 184

HNG 120 126 L G ½” G ½” 1634 890 1442 228

HNG 150 151 L G ½” G ½” 1634 890 1639 313

HNG 250 280 L G ¾” G ½” 1760 892 1975 491

HNG 330 408 L G 1” G ½” 1901 950 2025 692

HNG 450 464 L G 1” G ½” 2218 1010 2134 677

HNG 510 515 L G 1” G ¾” 2208 1010 2028 912

HNG 570 573 L G 1” G ¾” 2208 1010 2226 951

HNG 730 712 L G 1” G ¾” 2685 1110 2084 1091

HNG 910 1,0 m3 G 1 ½” G 1” 2727 1220 2485 1395

HNG 1110 1,3 m3 G 1 ½” G 1” 2896 1322 2521 1704

HNG 1230 1,4 m3 G 2” G 1” 2898 1322 2724 2031

HNG 1370 1,5 m3 G 2” G 1 ¼” 2895 1355 2941 2096

HNG 1820 2,0 m3 G 2” G 1 ½” 3599 1793 2634 2686

HNG 2050 2,3 m3 DN80 G 1 ½” 3390 1964 3124 3009

HNG 2550 2,3 m3 DN80 G 2” 3666 2139 3194 3040

HNG 2950 2,3 m3 DN80 G 2” 4074 2245 2787 3065

HNG 3540 2,3 m3 DN80 G 2” 4024 2375 3054 3214

HNG 4160 2,3 m3 DN80 G 2” 4020 2376 3361 3466

HNG 5560 2,3 m3 DN100 G 2 ½” 4125 2425 3890 4144

HNG 9170 2,3 m3 DN150 DN80 4502 2986 4364 5298

HNG 11200 2,3 m3 DN150 DN100 3081 4672 4728 5846

Note: Hertz supplies buffer tank volumes for 99,5 % and higher Nitrogen purities. For purities lower than 99,5 %, it may be
necessary to use additional tank. “Hertz reserves the right to change the design and /or Dimensions and /or Weight of his
products at any time without any notice or liability.”

CORRECTION FACTOR EXAMPLE: If nitrogen requirement of the plant is 20 Nm3/h

at 99,5 % purity while air Pressure is 7 barg and ambient
CMS Temperature Correction Factor Inlet Pressure Correction Factor
(0C) (Kt) (Bar) (Kp) Temperature is 40 oC

5 0,85 6 0,82
Calculation of HNG model as follows
AIR SEPARATION SYSTEM

10 1 6,5 0,88 For 40 oC ambient, Kt = 0,74

15 1 7 0,94 For 7 barg inlet, Kp = 0,94
20 1 7,5 1,0
HNG Model Flow
25 1 8 1,05 (Required N2 Flow) / (Kt x Kp) = (20Nm3/h) / (0,74 x 0,94) = 28,7 Nm3/h
30 0,91 8,5 1,1 Therefore the correct N2 Generator will be HNG-330

35 0,82 9 1,14
40 0,74 8,5 1,2
45 0,60 10 1,21

45
 NITROGEN PURIFIER
HDX SYSTEMS

Hertz’s brand new HDX Nitrogen Treatment System offers an extremely economic means of
increasing the required nitrogen purity beyond 99.9% to 99.999%.
The HDX Series uses a specially designed catalyst with a large surface area to increase nitrogen purity.
The oxygen left on the catalyst surface after the reaction is reduced to no more than 10 ppm.
HDX Nitrogen Treatment Devices when used in conjunction with HNG Nitrogen Generators use small
amounts of hydrogen to prevent compressed air loss and deliver very pure nitrogen. This system
delivers very pure nitrogen while keeping power consumption to a minimum.

Advantages
• Short payback period
• Small footprint
• Long-lasting efficiency ( > 10 years)
• Best quality high-performance solutions
• Investing in a lower capacity HDX system instead of a higher capacity HNG system for the same purity of
nitrogen reduces costs and saves on energy
• Up to 99.999% nitrogen purity with minimum space and energy requirements
• Low energy consumption
• Low CO2 emissions
• Heavy-duty build designed for hard conditions and industrial use
• High-quality and durable components
• System produces minimum 99.999% pure nitrogen with
a very low air/nitrogen ratio (3.0 instead of 8.4).
• Compact design, fully automated system
• 24/7 nitrogen production at the desired purity
• High energy savings
• Low-cost and special production
• Minimum maintenance costs

46
 Working Principle
Compared with existing applications, Hertz’s compact designed Nitrogen Treatment System can take nitrogen
produced at 99.5-99.9% purity and convert it to 99.999% pure nitrogen while delivering considerable energy
savings in nitrogen production costs.

The system uses a catalytic reaction to remove the oxygen left over from the HNG generator from the PSA
Nitrogen Generator outlet by utilizing the reaction between the residual oxygen and hydrogen to produce
99.999% pure nitrogen. The only by-product of this catalytic reaction is water.

The low cost of the hydrogen needed for the reaction results in considerable long-term savings.
In fact, this newly developed nitrogen purifier lets you produce extremely pure nitrogen using lower capacity air
compressors and equipment.

As the reaction increases the temperature of the nitrogen, the HDX Nitrogen Purifying System is integrated into a
High-Temperature Air Dryer, combining two products in a single unit for a complete solution.

N2 Flow at 99.999%
Model
Purity (m3/h)
HDX 10 1
HDX 20 2
HDX 35 3,5
HDX 60 6
HDX 95 10,4
HDX 120 13,9
HDX 150 17
HDX 250 27,1
HDX 330 35,8
HDX 450 48,4
HDX 510 55,5
HDX 570 61,6
HDX 730 80,6
HDX 910 98,6
HDX 1110 119,9
HDX 1230 132,3
HDX 1370 146,6
HDX 1820 198,2
HDX 2050 231,1
HDX 2550 277,1
HDX 2950 341,8
HDX 3540 400,5
AIR SEPARATION SYSTEM

HDX 4160 461,9

HDX 5560 556
HDX 6050 686,3
HDX 7500 816,4
HDX 9170 917
HDX 11200 1120

47
Hertz Kompressoren Global
[email protected]

Hertz Kompressoren Gmbh

Kronacherstr. 60, 96052 Bamberg
Tel: +49 951 96 43 13 88 Fax: +49 951 96 43 13 50
e-mail: [email protected]

Hertz Kompressoren Usa Inc.

3320 Service St. Charlotte, NC 28206 USA
Tel: +1 704 579 59 00 Fax: +1 704 579 59 97
e-mail: [email protected]