Coletor de Dados Zebra MC9300

O Coletor de Dados Zebra MC9300 Imager 2D simplifica os

processos em depósitos e fábricas em todo o mundo, ainda mais
nos dias atuais que você precisa processar e despachar mais
pedidos todos os dias, com mais rapidez do que nunca.

Com o Coletor Zebra MC9300 seus funcionários têm o máximo em

simplicidade com o Android, um sistema operacional que eles já
conhecem bem, uma tela touch maior e muito mais. Execute
todos os seus aplicativos com o máximo em poder de
processamento e memória. Os novos recursos de captura de
dados incluem câmeras frontais e traseiras, alcances de
escaneamento extraordinários e captura de marcação direta de
peças (DPM) superior.

www.bztech.com.br
MC93XX
Mobile Computer

User Guide

MN-003525-05 Rev A
Copyright
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many
jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google LLC. All other
trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates.
All rights reserved.

COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/
copyright.

WARRANTY: For complete warranty information, go to www.zebra.com/warranty.

END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula.

Terms of Use
• Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra
Technologies”). It is intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any
other parties for any other purpose without the express, written permission of Zebra Technologies.
• Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
• Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
• Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever (including,
without limitation, consequential damages including loss of business profits, business interruption, or loss of
business information) arising out of the use of, the results of use of, or inability to use such product, even if
Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.

Revision History
Changes to the original guide are listed below:

Change Date Description

-01 Rev A 03/2019 Initial release.
-02 Rev A 07/2019 Updated to include MC93XX freezer configuration.
-03 Rev A 10/2019 Updated to include SE4750 Direct Part Marking (DPM)/Direct Part Marking - Wide
(DPW), SE4770 scanner, and additional keypads.
-04 Rev A 02/2020 Updated Installing a microSD Card section with supported SD cards.
-05 Rev A 03/2020 Changed KeyManager to KeyMappingMgr in the Keypads chapter.

2
Table of Contents
Copyright ......................................................................................................................... 2
Terms of Use .................................................................................................................. 2
Revision History .............................................................................................................. 2

About This Guide ........................................................................................................ 10

Introduction ................................................................................................................... 10
Documentation Set ....................................................................................................... 10
Configurations .............................................................................................................. 11
Software Versions ......................................................................................................... 11
Chapter Descriptions .................................................................................................... 12
Notational Conventions ................................................................................................. 12
Related Documents ...................................................................................................... 13
Service Information ....................................................................................................... 13
Provide Documentation Feedback ................................................................................ 14

Getting Started ............................................................................................................ 15

Introduction ................................................................................................................... 15
Unpacking ..................................................................................................................... 15
Device Features ........................................................................................................... 16
Setup ............................................................................................................................ 19
Installing a microSD Card ...................................................................................... 19
Backup Power ....................................................................................................... 24
Charging Temperature .......................................................................................... 24
Charging Spare Batteries ...................................................................................... 24
Google Account Setup .......................................................................................... 24
Zebra Visibility Services ........................................................................................ 25
Replacing the Battery in the Device ...................................................................... 25
Hot Swap Mode ..................................................................................................... 27
Accessing Device Settings .................................................................................... 28
Battery Management ..................................................................................................... 28

3
 Table of Contents

Monitoring Battery Usage ...................................................................................... 28

Low Battery Notification ......................................................................................... 29
Battery Optimization .............................................................................................. 29
Real-Time Clock Backup ....................................................................................... 30
Setting the Date and Time ............................................................................................ 30
Display Settings ............................................................................................................ 30
Setting the Screen Brightness ............................................................................... 30
Setting Screen Timeout ......................................................................................... 31
Setting Screen Rotation ........................................................................................ 31
Setting Font Size ................................................................................................... 31
Setting Display Size .............................................................................................. 32
Ambient Display .................................................................................................... 33
Touch Panel Mode ................................................................................................ 33
Keyboard Backlight ............................................................................................... 34
Setting Notification LED ........................................................................................ 35
General Sound Setting .................................................................................................. 35
Wake-Up Sources ......................................................................................................... 36

Using the Device ......................................................................................................... 38

Introduction ................................................................................................................... 38
Google Mobile Services ................................................................................................ 38
Home Screen ................................................................................................................ 38
Home Screen ................................................................................................................ 39
Setting Home Screen Rotation .............................................................................. 39
Status Bar .............................................................................................................. 40
Status Icons .................................................................................................... 40
Notification Icons ............................................................................................. 42
Managing Notifications .................................................................................... 42
Setting App Notifications ................................................................................. 43
Viewing Notification Settings for All Apps ....................................................... 44
Controlling Lock Screen Notifications ............................................................. 44
Notification Indicator ....................................................................................... 44
Quick Access Panel ........................................................................................ 44
Editing Icons on Quick Settings ............................................................................. 45
App Shortcuts and Widgets ................................................................................... 46
Adding an App Shortcut to the Home Screen ................................................. 46
Adding a Widget to the Home Screen ............................................................. 46
Moving Items on the Home Screen ................................................................. 47
Removing an App Shortcut or Widget from the Home Screen ....................... 47
Folders .................................................................................................................. 47
Creating a Folder ............................................................................................ 47
Naming Folders ............................................................................................... 47
Removing a Folder .......................................................................................... 48

4
 Table of Contents

Home Screen Wallpaper ....................................................................................... 48

Using the Touchscreen ................................................................................................. 48
Keyboards ..................................................................................................................... 49
Virtual Keyboard Configuration ............................................................................. 49
Enabling Virtual Keyboards ............................................................................. 49
Switching Between Virtual Keyboards ............................................................ 49
Physical Keyboard Configuration .......................................................................... 49
Enabling Physical Keyboards ......................................................................... 49
Using the Enterprise Keyboard ............................................................................. 49
Numeric Tab ................................................................................................... 50
Alpha Tab ........................................................................................................ 50
Additional Character Tab ................................................................................ 50
Scan Tab ......................................................................................................... 51
Do Not Disturb Feature ................................................................................................. 51
Limit Sounds and Vibrations ........................................................................... 51
Total Silence ................................................................................................... 51
Alarms Only .................................................................................................... 52
Priority Notifications Only ................................................................................ 52
Silence Sounds During Certain Times ............................................................ 53
Silence Sounds During Events and Meetings ................................................. 53
Turn Sounds Back On ..................................................................................... 53
Override Do Not Disturb for Specific Apps ............................................................ 54
Apps .............................................................................................................................. 54
Accessing Apps ............................................................................................................ 57
Switching Between Recent Apps .......................................................................... 57
Un-Locking the Screen .......................................................................................... 58
Smart Lock ............................................................................................................ 60
Resetting the Device ..................................................................................................... 61
Performing a Soft Reset ................................................................................................ 62
Performing a Hard Reset ....................................................................................... 62
Suspend Mode .............................................................................................................. 62
Transferring Files with a Host Computer via USB ........................................................ 62
Transferring Files .......................................................................................................... 62
Transferring Photos ............................................................................................... 63
Disconnect from the Host Computer ..................................................................... 63

Applications ................................................................................................................ 64
Introduction ................................................................................................................... 64
Battery Manager ........................................................................................................... 64
Heater Control .............................................................................................................. 67
Status .................................................................................................................... 67
Advanced .............................................................................................................. 68
Files ............................................................................................................................. 70

5
 Table of Contents

Contacts ....................................................................................................................... 71
Adding a Contact ................................................................................................... 71
Editing Contacts .................................................................................................... 71
Deleting Contacts .................................................................................................. 71
Camera ........................................................................................................................ 72
Taking Photos .............................................................................................................. 73
Taking a Panoramic Photo .................................................................................... 74
Recording Videos .................................................................................................. 74
Photo Settings ....................................................................................................... 75
Rear Camera .................................................................................................. 76
Video Settings ................................................................................................. 76
Rear Camera .................................................................................................. 77
Photos .......................................................................................................................... 78
Working with Albums ...................................................................................... 79
Sharing an Album .................................................................................................. 80
Deleting an Album ........................................................................................... 80
Working with Photos ....................................................................................... 81
Viewing and Browsing Photos ........................................................................ 81
Cropping a Photo ............................................................................................ 81
Setting a Photo as a Contact Icon .................................................................. 82
Sharing a Photo .............................................................................................. 82
Deleting a Photo ............................................................................................. 83
Working with Videos .............................................................................................. 83
Watching a Video ............................................................................................ 83
Sharing a Video .............................................................................................. 83
Deleting a Video .............................................................................................. 83
DataWedge Demonstration .......................................................................................... 84
Scanner Selection ................................................................................................. 85
Sound Recorder ........................................................................................................... 86
PTT Express Voice Client ............................................................................................. 86
PTT Audible Indicators ................................................................................................. 87
PTT Notification Icons ........................................................................................... 87
Enabling PTT Communication ............................................................................... 87
Selecting a Talk Group .......................................................................................... 88
PTT Communication .............................................................................................. 88
Creating a Group Call ..................................................................................... 88
Responding with a Private Response ................................................................... 88
Disabling PTT Express Voice Client Communication ............................................ 89
RxLogger ..................................................................................................................... 90
RxLogger Utility ............................................................................................................ 91
Diagnostic Tool ............................................................................................................ 92
Settings ................................................................................................................. 95
Battery Test Information ........................................................................................ 95

6
 Table of Contents

GPS Test Information ............................................................................................ 96

System Test Information ....................................................................................... 96
WLAN Test Information ......................................................................................... 96
WWAN Test Information ........................................................................................ 96
Bluetooth Test Information .................................................................................... 96
Device Central ............................................................................................................. 97
Paging an RS6000 Ring Scanner ................................................................................ 98

Data Capture................................................................................................................ 99
Introduction ................................................................................................................... 99
Integrated Imager .......................................................................................................... 99
Operational Modes ................................................................................................ 99
Laser Scanner ............................................................................................................. 100
RS507/RS507X Hands-Free Imager .......................................................................... 100
RS6000 Bluetooth Ring Scanner ................................................................................ 100
DS3678 Digital Scanner .............................................................................................. 100
Scanning Considerations ............................................................................................ 101
Barcode Capture with Imager ..................................................................................... 101
Barcode Capture with Laser Scanner ......................................................................... 102
Scanning with RS507/RS507X Hands-Free Imager ................................................... 103
Scanning with RS6000 Bluetooth Ring Scanner ......................................................... 105
Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner .................. 106
Pairing the RS507/RS507X/RS6000 Hands-Free Imager .......................................... 107
Pairing Using Near Field Communication ................................................................... 107
Pairing in HID Mode Using Near Field Communication ...................................... 108
Pairing Using Simple Serial Interface (SSI) ......................................................... 109
Pairing Using Bluetooth Human Interface Device ............................................... 110
Pairing a Bluetooth Scanner ................................................................................ 111
Pairing Using Bluetooth Human Interface Device ............................................... 111
DataWedge ......................................................................................................... 112
Enabling DataWedge ................................................................................................. 113
Disabling DataWedge .......................................................................................... 113

Wireless ..................................................................................................................... 114

Introduction ................................................................................................................. 114
Wireless Local Area Networks .................................................................................... 114
Connecting to a Wi-Fi Network ................................................................................... 114
Removing a Wi-Fi Network .................................................................................. 116
Bluetooth ............................................................................................................. 116
Adaptive Frequency Hopping .............................................................................. 116

7
 Table of Contents

Security ....................................................................................................................... 117

Bluetooth Profiles ................................................................................................ 117
Bluetooth Power States ....................................................................................... 118
Bluetooth Radio Power ........................................................................................ 118
Enabling Bluetooth ........................................................................................ 118
Disabling Bluetooth ....................................................................................... 119
Discovering Bluetooth Device(s) ................................................................... 119
Changing the Bluetooth Name ............................................................................ 119
Connecting to a Bluetooth Device ................................................................. 119
Selecting Profiles on the Bluetooth Device ......................................................... 120
Unpairing a Bluetooth Device .............................................................................. 120
Using a Bluetooth Headset .................................................................................. 120
Near Field Communications ........................................................................................ 120
Reading NFC Cards ............................................................................................ 121
Sharing Information Using NFC .......................................................................... 122
Cast ..................................................................................................................... 122

Accessories............................................................................................................... 123
Introduction ................................................................................................................. 123
MC93XX Accessories ................................................................................................. 123
1-Slot USB Charge Cradle with Spare Battery Charger ...................................... 127
Charging the Battery ........................................................................................... 128
Charging Temperature .................................................................................. 128
4-Slot Charge Only ShareCradle ............................................................................... 129
Charging the Battery ........................................................................................... 129
Battery Charging in the 4-Slot Charge Only ShareCradle ................................... 130
Charging Temperature .................................................................................. 130
4-Slot Ethernet ShareCradle ...................................................................................... 131
Battery Charging in the 4-Slot Ethernet ShareCradle ......................................... 131
Charging Temperature .................................................................................. 132
4-Slot Spare Battery Charger ..................................................................................... 133
16-Slot Spare Battery Charger .................................................................................... 134
USB Charge/Com Snap-on Cup ................................................................................ 135
Connecting the USB Charge Cable to Device ........................................................... 136
Connecting the USB Charge/Com Snap-on Cup Cable to Host Computer ......... 136
Charging the Device .................................................................................................. 138
Disconnecting the USB Charge/Com Snap-on Cup ............................................ 138
MC93XX Charge Only Adapter .................................................................................. 140
Charge Only Adapter Installation ........................................................................ 141
Rubber Boot ............................................................................................................... 143
Installing the Hand Strap ............................................................................................ 145
Un-powered Forklift Mount ......................................................................................... 146

8
 Table of Contents

Maintenance and Troubleshooting ......................................................................... 148

Introduction ................................................................................................................. 148
Maintaining the Device ................................................................................................ 148
Battery Safety Guidelines ........................................................................................... 148
Cleaning Instructions .................................................................................................. 149
Approved Cleanser Active Ingredients ................................................................ 149
Harmful Ingredients ............................................................................................. 149
Device Cleaning Instructions ............................................................................... 150
Special Cleaning Notes ....................................................................................... 150
Cleaning Materials Required ............................................................................... 150
Cleaning Frequency ............................................................................................ 150
Cleaning the Device ............................................................................................ 150
Housing ......................................................................................................... 150
Display .......................................................................................................... 150
Exit Window .................................................................................................. 151
Cleaning Battery Connectors .............................................................................. 151
Cleaning Cradle Connectors ............................................................................... 151
Troubleshooting .......................................................................................................... 152
MC93XX .............................................................................................................. 152

Specifications............................................................................................................ 155
Introduction ................................................................................................................. 155
MC93XX Technical Specifications ...................................................................... 155

Keypads ..................................................................................................................... 159

Introduction ................................................................................................................. 159
Removing and Replacing Keypads ............................................................................. 159
58-Keys Alpha Numeric Function Keypad ................................................................. 163
53-Keys Standard Keypad ......................................................................................... 166
53-Keys IBM-5250 Emulator Keypad ......................................................................... 169
53-Keys IBM-3270 Emulator Keypad ......................................................................... 172
53-Keys VT Emulator Keypad ............................................................................. 175
43-Keys Shifted Alpha Keypad .................................................................................. 178
34-Keys Numeric Keypad .......................................................................................... 181
29-Keys Shifted Alpha Keypad .................................................................................. 184
Keypad Special Functions ......................................................................................... 187
Special Characters ..................................................................................................... 188

Index........................................................................................................................... 190

9
 About This Guide

Introduction
This guide provides information about using the MC93XX mobile computer and accessories.

NOTE: Screens pictured in this guide are samples and can differ from actual screens.

Documentation Set
The documentation set provides information for specific user needs, and includes:
• MC93XX Quick Start Guide - describes how to get the device up and running.
• MC93XX User Guide - describes how to use the device.
• MC93XX Integrator Guide - describes how to set up the device and accessories.
• MC93XX Regulatory Guide - provides all regulatory, service, and EULA information for the device.

10
 About This Guide

Configurations
MC93XX used in this guide refers to all configurations, except where noted. MC93XX refers to the Trigger
configuration.

This guide covers the following configurations:

Table 1 Configurations

Configuration Radios Display Memory Data Capture Operating

Options System
MC93XX–G Base WLAN: IEEE 802.11 4.3" WVGA (800 4 GB RAM / SE965 1D, Android-based
a/b/g/n/ac/d/h/i/r/w x 480) LCD 32 GB Flash SE4750-SR 2D, GMS 8.1.0
WPAN: Bluetooth v5.0 SE4850-ER 2D
Low Energy SE4750DPM
SE4750DPW
SE4770 2D
Package 1 WLAN: IEEE 802.11 4.3" WVGA (800 4 GB RAM / SE965 1D, Android-based
MC93XX–G Base + a/b/g/n/ac/d/h/i/r/w x 480) LCD 32 GB Flash SE4750-SR 2D, GMS 8.1.0
WPAN: Bluetooth v5.0 SE4850-ER 2D
NFC (Tap to Pair) +
Low Energy SE4750DPM
Vibrator Motor
SE4750DPW
SE4770 2D
Package 2 WLAN: IEEE 802.11 4.3" WVGA (800 4 GB RAM / SE965 1D, Android-based
Package 1 + a/b/g/n/ac/d/h/i/r/w x 480) LCD 32 GB Flash SE4750-SR 2D, GMS 8.1.0
WPAN: Bluetooth v5.0 SE4850-ER 2D
Front and Rear
Facing Cameras Low Energy SE4770 2D
MC93XX-G Freezer + WLAN: IEEE 802.11 4.3" WVGA (800 4 GB RAM / SE965 1D, Android-based
NFC (Tap to Pair) + a/b/g/n/ac/d/h/i/r/w x 480) LCD. 32 GB Flash SE4750-SR 2D, GMS 8.1.0
Vibrator Motor Optically Bonded SE4850-ER 2D
WPAN: Bluetooth v5.0
Low Energy to the Touch SE4770 2D
Panel.

Software Versions
To determine the current software versions:
1. Swipe down from the Status bar to open the Quick Settings bar.

2. Touch > System.

3. Touch About phone.

11
 About This Guide

4. Scroll to view the following information:

• Status
• Battery information
• SW components
• Legal information
• Model
• Android version
• Android security patch level
• Kernel version
• Build Fingerprint
• Build number.

To determine the device serial number, touch About phone > Status.
• Serial number

Chapter Descriptions
Topics covered in this guide are as follows:
• Getting Started provides information on getting the device up and running for the first time.
• Using the Device provides basic instructions for using the device with Android OS, including powering on
and resetting the device.
• Applications describes the applications installed on the device.
• Data Capture provides information for capturing barcode data using the internal scanner and optional scan
modules and Bluetooth scanner.
• Wireless provides information on the various wireless options.
• Accessories describes the available accessories and how to use them with the device.
• Maintenance and Troubleshooting includes instructions on cleaning and storing the device, and provides
troubleshooting solutions for potential problems during device operation.
• Specifications provides the technical specifications for the device.
• Keypads provides keypad descriptions and special character generation tables.

Notational Conventions
The following conventions are used in this document:
• Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.

12
 About This Guide

• Bullets (•) indicate:

• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential.
• Sequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.

Related Documents
• MC93XX Mobile Computer Quick Start Guide, p/n MN-003413-xx
• MC93XX Regulatory Guide, p/n MN-003409-xx
• MC93XX Mobile Computer Integrator Guide, p/n MN-003445-xx
• RS507/RS507X Hands-free Imager Product Reference Guide, p/n 72E-12082-xx
• DS36X8 Product Reference Guide, p/n MN-002689-xx
• RS6000 User Guide, MN-002704-xx
• DS2278 Digital Scanner Product Reference Guide, p/n, MN-002915-xx.

For the latest version of this guide and all guides, go to: http://www.zebra.com/support.

Service Information
If you have a problem with your equipment, contact Customer Support for your region. Contact information is
available at: www.zebra.com/support.

When contacting support, please have the following information available:

• Serial number of the unit (found on manufacturing label)
• Model number or product name (found on manufacturing label)
• Software type and version number

Customer Support responds to calls by email or telephone within the time limits set forth in support
agreements.

If the problem cannot be solved by Customer Support, you may need to return the equipment for servicing and
will be given specific directions. We are not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void the warranty.Remove
the microSD card from the device before shipping for service.

If the device was purchased from a business partner, contact that business partner for support.

If the manufacturing label is worn or missing, use an NFC enabled device to read the NFC tag under the
battery compartment. You can download the NFC Reader application for free from the Google Play store.

13
 About This Guide

Figure 1 Manufacturing Label Location

Manufacturing Label

NFC Tag (Inside the battery compartment.)

NFC Symbol

Provide Documentation Feedback

If you have comments, questions, or suggestions about this guide, send an email to
[email protected].

14
Getting Started

Introduction
This chapter provides the features of the device and explains how to set it up for the first time.

Unpacking
Carefully remove all protective material from the device and save the shipping container for later
storage and shipping.

Verify the following items are in the box:

• Device
• Lithium-ion battery
• Regulatory Guide.

Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra
Support Center immediately.

15
 Getting Started

Device Features
Figure 2 MC93XX Front View

13
12
2 11

10

3
9
4
5
6

Table 2 MC93XX Features - Front View

Number Item Function

1 Ambient Light Controls display and keyboard backlight.
Sensor
2 Front Facing Use to take photos and videos.
Camera
NOTE: The front camera is available only on the premium configurations.

3 Display Displays all information needed to operate the device.

4 Speaker Side Provides audio output for video and music playback.
Port
5 Trigger Initiates data capture when a scan application is enabled.
6 P1 - Dedicated Initiates push-to-talk communications (programmable).
PTT Key
7 Battery Release Releases the battery from the device.
Latch
NOTE: To release the battery, simultaneously press the battery release latches
on both the sides of the device.

16
 Getting Started

Table 2 MC93XX Features - Front View (Continued)

Number Item Function

8 Battery Provides power for operating the device.
9 Microphone Use for communications in Handset mode.
10 Keypad Use to enter data and navigate on screen functions.
11 Power Button Press and hold to turn on the device. Press to turn on or off the screen.
Press and hold to select one of these options:
Power off - Turn off the device.
Restart - Restart the device when software stops responding.
12 Center Scan Initiates data capture when a scan application is enabled.
Button
13 Charger/Decode Indicates battery charging status while charging, app generated
Status LED notifications, and data capture status.

Figure 3 MC93XX Back View

14

15

16

20

19
18

17

17
 Getting Started

Table 3 MC93XX Features - Back View

Number Item Function
14 Passive NFC Tag Provides secondary product label information (configuration, serial
number and manufacture data code) in the event that the readable
(Inside the battery
product label is worn or missing.
compartment.)
15 Battery Release Releases the battery from the device.
Latch
16 Side Speaker Port Provides audio output for video and music playback.
17 Scanner Exit Provides data capture using the scanner/imager.
Window
18 Camera Flash Provides illumination for the camera.

NOTE: Camera is available only on some configurations.

19 NFC Antenna Provides communication with other NFC-enabled devices.

NOTE: NFC antenna is available only on the premium configurations.

20 Rear Camera Takes photos and videos.

NOTE: The rear camera is available only on the premium configurations.

18
 Getting Started

Setup
To start using the device for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the device
• Power on the device.

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the keypad module.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use. It is strongly recommended that prior to use, you must format the microSD card on
the device.

NOTE: The following microSD cards were tested and are validated for use with the MC93XX:
• SanDisk 16GB (SDSDQ-016G-A11M)
• SanDisk 32GB (SDSDQ-032G-A11M)
• SanDisk 64GB (SDSDQUA-064G-U46A)
• SanDisk 128GB (SDSDQUI-128G-A46)
• SanDisk 200GB (SDSDQUAN-200G-A4A).

CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-
cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.

1. Power off the device.

2. Remove the battery.
3. Using a Torx T8 screwdriver with a large grip, remove the two keypad latch screws from inside the battery
slot.

Figure 4 Remove Keypad Latch Screws

Keypad Latch Screws

19
 Getting Started

4. Slide the keypad latches toward the bottom of the device.

Figure 5 Release Keypad Latches

Screwdriver

Keypad Latches

NOTE: If the keypad latches are hard to move, use a screwdriver to gently slide them towards the bottom of the device.

5. Turn the device over so that the keypad is visible.

6. Using a Torx T8 screwdriver with a large grip, remove the two keypad assembly screws from the top of the
keypad.

Figure 6 Remove Keypad

Keypad Screws

Keypad

microSD Card Holder

20
 Getting Started

7. Lift the keypad from the device.

8. Slide the microSD card holder to the Open position.

Figure 7 Open microSD Card Holder

9. Lift the microSD card holder.

Figure 8 Lift microSD Card Holder

10.Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each
side of the door.

Figure 9 Insert microSD Card into Holder

21
 Getting Started

11.Close the microSD card holder door and slide the door to the Lock position.

Figure 10 Close and Lock microSD Card in Holder

12.Align the keypad along the bottom ridge of the device, and then lay it flat.

Figure 11 Replace Keypad

22
 Getting Started

13.Using a Torx T8 screwdriver with a large grip and a long shaft, secure the keypad to the device using the
two screws. Torque screws to 5.8 kgf-cm or 5.0 lbf-in.

Figure 12 Replace Keypad Screws

Keypad Screws

14.Turn the device over so that the keypad latches are visible.
15.Slide both the keypad latches toward the top of the device.

Figure 13 Slide Keypad Latches

Keypad Latches

23
 Getting Started

16.Using a Torx T8 screwdriver, replace the two keypad latch screws inside the battery slot and torque to 5.8
kgf-cm or 5.0 lbf-in.

Figure 14 Replace Keypad Latch Screws

Keypad Latch Screws

17.Insert the battery.

18.Press and hold the Power key to power on the device.

Backup Power

The device is equipped with a super-capacitor (supercap) to provide backup power to the device when the
main battery is removed. The supercap will retain random access memory (RAM) data in memory for
approximately five minutes after the main battery is removed during Hot Swap.

IMPORTANT: The supercap is automatically charged from the main battery and requires approximately fifteen
minutes to fully charge.

Charging Temperature

Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures, for example at approximately +37°C
(+98°F), the device or cradle may for small periods of time alternately enable and disable battery charging to
keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.

Charging Spare Batteries

See the Accessories section for information on using accessories to charge spare batteries.

Google Account Setup

NOTE: You must connect the device to the internet in order to set up a Google™ account.
A Google account is only required on devices with GMS software.

24
 Getting Started

The first time the device starts, the Setup Wizard displays. Follow the on-screen instructions to set up a Google
account, configure Google Pay ™ for purchasing items from the Google Play ™ store, to enter your personal
information, and enable backup or restore features.

Zebra Visibility Services

The device captures and provides device analytics to a system administrator. The first time the device boots
(or after a Factory reset), the Zebra Services agreement screen displays.

Figure 15 Zebra Services

1. Touch the Device Data switch to disable the device from sending analytics data. Zebra recommends
keeping this option enabled.

2. Touch OK.

Replacing the Battery in the Device

To replace the battery:

1. Push in the two primary Battery Release buttons.
The battery ejects slightly. With Hot Swap mode, when you remove the battery, the display turns off and the
device enters a low power state. The device retains RAM data for approximately five minutes. Replace the
battery within five minutes to preserve memory persistence.

25
 Getting Started

Figure 16 Primary Battery Releases

2. Push in the secondary battery release buttons on the sides of the battery.

Figure 17 Secondary Battery Releases

3. Remove the battery from the battery slot.

Figure 18 Remove Battery

26
 Getting Started

4. Align the battery with the battery slot.

Figure 19 Inserting the Battery

5. Push the battery into the battery slot.

6. Press battery firmly into the battery well. Ensure that both the battery release buttons on the sides of the
device return to the home position. You will hear an audible click sound indicating that both the battery
release buttons on the sides of the device have returned to the home position locking the battery in place.

Figure 20 Press Battery In

7. Press the Power button to turn on the device.

Hot Swap Mode

The device provides a Hot Swap mode where you can replace the battery without powering off the device.
When you remove the battery, the display turns off and the devices enters the Hot Swap mode. WLAN and
Bluetooth connectivity are retained for the first 30 seconds (indicated by a flashing amber LED). After 30
seconds, the device enters a critical suspend mode with RAM data persistence for approximately 5 minutes. In
the critical suspend mode, WLAN and Bluetooth radios are disabled and will only resume if you insert a battery
with sufficient charge into the device.

CAUTION: To prevent damage to the device, DO NOT perform a hot swap during a device boot up session.

IMPORTANT: The supercap requires time to recharge after performing a Hot Swap or after the main battery is
fully depleted. It can take up to 15 minutes to fully charge the supercap. Hot Swap mode will not retain data

27
 Getting Started

unless the supercap is fully charged.

Accessing Device Settings

To access device settings:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. On the Home screen, swipe up from the bottom of the screen and touch .

Battery Management
NOTE: Prior to checking the battery charge level, remove the device from any AC power source (cradle or cable).

To check the charge status of the main battery, open Settings and touch System > About phone > Battery
Information.

Battery present status indicates if the battery is present and Battery level lists the battery charge (as a
percentage of fully charged). The battery percentage can also be viewed next to the battery icon in the quick
access panel. Swipe down with two fingers from the status bar to open the quick access panel.

Monitoring Battery Usage

The Battery screen provides battery charge details, power management options, and a list of apps that
consume the most battery power.

Use the power management options to extend battery life, or touch an app to display details about its power
consumption. Different apps display different information. Some apps include buttons that open screens with
settings to adjust power use. Use the DISABLE or FORCE CLOSE buttons to turn off apps that consume too
much power.

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Battery.

28
 Getting Started

Figure 21 Battery Screen

Low Battery Notification

When the battery state of charge drops below 15% on the standard battery and 30% on the freezer battery, a
notification displays indicating a low battery. The battery status icon changes to . You must either replace or
charge the battery using one of the charging accessories.

When the battery state of charge drops below 9% on the standard battery and 20% on the freezer battery, a
notification displays indicating a very low battery. The battery status icon changes to . You must either
replace or charge the battery using one of the charging accessories.

When the battery state of charge drops below 6% on the standard and freezer batteries, the device goes into
critical suspend mode to retain data. The screen turns off. You must replace the battery or charge the device
using one of the charging accessories to retain data.

NOTE: If you place a device with a deeply discharged battery on a device charger, the battery has to pre-charge to an op-
erational voltage level before the device can resume operation. This is indicated via the blinking amber LED. You must avoid
deeply discharging the battery as it can reduce the overall battery health.

Battery Optimization

Observe the following battery saving tips:

• Set the screen to turn off after a short period of non-use.
• Reduce screen brightness.
• Turn off all wireless radios when not in use.
• Turn off automatic syncing for Email, Calendar, Contacts, and other apps.
• Minimize use of apps that keep the device from suspending, for example, music and video apps.

29
 Getting Started

Real-Time Clock Backup

The device provides a Real-time Clock (RTC) backup feature. The device saves the system time at regular
intervals to a backup file in persistent storage.

If the system time is not the latest when the device re-boots, the device uses the time from the backup file to
update the RTC. Wi-Fi authentication certificates are validated using the restored time. Using the correct time
from the Wi-Fi network, the system time and the RTC are updated.

Setting the Date and Time

You are only required to set the time zone or set the date and time if the wireless LAN does not support
Network Time Protocol (NTP).

To set the date and time:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch System > Date & time.

3. Touch Automatic date & time to disable automatic date and time synchronization.
4. Touch Update Interval.
5. Select the interval time to synchronize your device time from the network.
6. Touch Set date.
7. In the calendar, set today’s date.
8. Touch OK.
9. Touch Set time.
10.Touch the green circle, drag to the current hour and then release.
11.Touch the green circle, drag to the current minute and then release.
12.Touch AM or PM.
13.Touch OK.
14.Touch Select time zone.
15.Select the current time zone from the list.
16.Touch Use 24-hour format.

17.Touch .

Display Settings
Use Display settings to change the screen brightness, enable night light, change the background image,
enable screen rotation, control the keyboard backlight, set sleep time, and change font size.

Setting the Screen Brightness

To manually set the screen brightness using the touchscreen:

30
 Getting Started

1. Swipe down with two fingers from the Status bar to open the Quick Access panel.
2. Slide the icon to adjust the screen brightness level.

Figure 22 Brightness Slider

To manually set the screen brightness using the keypad see Keypad Special Functions.

Setting Screen Timeout

To set the screen sleep time:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Sleep.

3. Select one of the sleep values.
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 30 minutes (default)
• Never

4. Touch .

Setting Screen Rotation

By default, screen rotation is disabled.

To enable screen rotation:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Advanced.

3. Touch Auto-rotate screen.

NOTE: To change the Home screen rotation, see Setting Home Screen Rotation.

4. Touch .

Setting Font Size

To set the size of the font in system apps:

1. Swipe down from the Status bar to open the Quick Settings panel and then touch .

31
 Getting Started

2. Touch Display > Advanced.

3. Touch Font size.

Figure 23 Font Settings

4. Select one of the font size values.

• Small
• Default
• Large
• Largest.

5. Touch .

Setting Display Size

By default, display size is set to default.

To change the display size:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Advanced.

3. Touch Display size.
4. Touch - and + to change the display size.
• Small
• Default
• Large.

5. Touch .

32
 Getting Started

Ambient Display

The Ambient display setting wakes the screen when notifications are received.

To disable ambient display:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Advanced.

3. Touch Ambient display.
4. In the When to show section, enable or disable an option using the switch.

5. Touch .

Touch Panel Mode

The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.

NOTE: A glove can be made of medical latex, leather, cotton, or wool.

For optimal performance use a Zebra certified stylus.

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Advanced.

3. Touch Touch panel mode.

Figure 24 Touch Panel Mode Dialog Box

4. Select:
a. Glove and Finger (Screen Protector off) to use a finger or a gloved finger on the screen without a
screen protector.
b. Stylus and Finger (Screen Protector off) to use a finger or a stylus on the screen without a screen
protector.
c. Finger Only to use a finger on the screen.
d. Glove and Finger (Screen Protector on) to use a finger or a gloved finger on the screen with a screen
protector.
e. Stylus and Finger (Screen Protector on) to use a finger or a stylus on the screen with a screen
protector.

5. Touch .

33
 Getting Started

Keyboard Backlight

To manually set the keyboard backlight brightness and timeout using the touchscreen:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Display > Advanced.

3. Touch Keyboard backlight.

Figure 25 Keyboard Light

4. Touch Keyboard light level, and then slide the icon to adjust the brightness level.

Figure 26 Brightness SliderLight

5. Touch Keyboard light timeout and select one of the timeout values.
• 6 seconds (default)
• 10 seconds
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• Always on
6. By default, Adaptive keyboard brightness is enabled, touch the switch to enable the device to automatically
adjust the display backlight based on ambient lighting condition.

NOTE: If you use the keyboard keys to adjust the keyboard backlight, the system disables Automatic Keyboard backlight
adjustments.

7. Touch .

34
 Getting Started

Setting Notification LED

The Charging/Notification LED lights blue when an application, such as email and VoIP, generates a
programmable notification or to indicate when the device is connected to a Bluetooth device. By default, LED
notifications are enabled. To change the notification setting:

1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .

2. Touch Apps & notifications > Notifications.

3. Touch Blink light to toggle the notification on or off.

4. Touch .

General Sound Setting

Use the Sound settings to configure media and alarm volumes.

To access sound settings:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Sound.
3. Touch an option to set sounds.

Figure 27 Sound Screen

• Zebra volume controls

• Ring volume - Controls the ringtone volume.
• Media volume - Controls the music, games, and media volume.
• Alarm volume - Controls the alarm clock volume.
• Notifications volume - Controls the notification volume.
• Scanner volume - Controls the scanner volume.
• Volume presets
• - Mutes the ring, notifications, and scanner so that the device does not make sounds or vibrate.
• - All sounds except media and alarms are silenced and vibrate mode is active.

35
 Getting Started

• - Enables all sounds at the user defined levels.

• Do Not Disturb preferences - Mutes some or all sounds and vibrations.
• Priority only allows - Use to set the priorities for the following:
• Reminders - Switch on or off.
• Events - Switch on or off.
• Alarms - This is always enabled.
• Block visual disturbances
• Block when screen is on - This option prevents notifications from displaying over the screen
(peeking) while you are actively using the device.
• Block when screen is off - This option prevents notifications from turning on the screen or pulsing
the LED light when a new notification is received while you are not using the device.
• Automatic rules - Choose when to automatically silence the device. Touch a default rule, such as
Weekend or Weeknight, or create your own rule. To create your own rule, tap Add more and then Time
rule.
• Phone ringtone - Touch to select a sound to play when the phone rings.
• Advanced - Touch to display advanced sound options.
• Default notification sound - Touch to select a sound to play for all system notifications.
• Default alarm sound - Touch to select a sound to play for alarms.
• Other sounds and vibrations
• Screen locking sounds - Play a sound when locking and unlocking the screen (default – enabled).
• Charging sounds - Not applicable.
• Touch sounds - Play a sound when making screen selections (default – enabled).
• Vibrate on tap - Vibrate the device when making screen selections (default – disabled).
• Key press sounds - Play a sound when making keyboard button selections (default – disabled)

NOTE: You can adjust the sound volume which is set at a default of 50% for the key press. Go to Settings > System >
Languages & input > Physical keyboard > Volume on keypress, and set the volume as required.
• Emergency alerts - Touch to configure emergency broadcast settings and notifications.

Wake-Up Sources
By default the device wakes from suspend mode when you press the power button. You can configure the
device to wake when you press the PTT or Scan buttons on the left side of the device.

The P1 key only wakes the unit in its default configuration (when it acts as the PTT key). The SCAN key (if
enabled), and the Grip Trigger will wake the unit from suspend for all key mappings.

NOTE: The P2 can be mapped as a trigger key and can act as a wake-up source. However, if it is mapped to something
else, the P2 key will not wake the device.

1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .

2. Touch Wake-Up Sources.

36
 Getting Started

Figure 28 Wake-Up Sources

3. Touch one or more of the options:

• By default P1 is enabled. Touch P1 check box to disable the right scan button.
• Touch SCAN check box to enable the right scan button. A check appears in the check box.
• By default GRIP_TRIGGER is enabled. Touch GRIP_TRIGGER check box to disable the left scan
button.

4. Touch .

37
Using the Device

Introduction
This chapter describes the screens, status and notification icons, and controls on the device, and
provides basic instructions for using the device.

Google Mobile Services

NOTE: This section applies to Google Mobile Services (GMS) devices only.

Devices with GMS contain apps and services that provide additional functionality.

GMS includes:
• Apps - GMS adds a variety of Google apps and associated widgets including Chrome, Gmail,
Drive, and Maps.
• Services:
• Speech to Text - Allows for free format speech to text in many languages for both connected
and disconnected network. Launch by touching the microphone icon on the keyboard.
• TalkBack Service - Provides spoken feedback on various parts of the user interface. To enable,
go to Settings > Accessibility.
• Network Location Provider - Adds a location provider which uses mobile network tower
information and Wi-Fi access point information to provide a location without using GPS. To
enable, go to Settings > Security & location > Location.
• Widevine DRM - Enables Digital Rights Management (DRM) so that protected streaming video
content can be played. Enable DRM Info from the Google Play ™ store.
• Google Cloud Messaging - Allows the device to receive data from the server and other devices
on the same connection.
• Backup and Restore - Allows the users settings and apps to be backed up to a Google server
and subsequently restored from that server after a factory reset.
• Google Accounts - Create and use a Google account to synchronize mail, files, music, photos,
contacts and calendar events.

Home Screen
Turn on the device to display the Home screen. Depending on the configuration, the Home screen may
appear different. Contact your system administrator for more information.

38
 Using the Device

After a suspend or screen time-out, the Home screen displays with the lock slider. Touch the screen and slide
up to unlock. For screen locking information, see Un-Locking the Screen.

The Home screen provides additional screens for placement of widgets and shortcuts. Swipe the screen left or
right to view the additional screens.

Home Screen
1

4
8

5 6 7

The Home screen consists of the following:

Table 4 Home Screen Items

Item Description
1 — Status Bar Displays the time, status icons (right side), and notification icons (left side). For
more information see Status Bar and Managing Notifications.
2 — Widgets Launches stand-alone applications that run on the Home screen. See App
Shortcuts and Widgets for more information.
3 — Folder Contains apps.
4 — Shortcut Icons Opens applications installed on the device. See App Shortcuts and Widgets for
more information.
5 — Back Displays the previous screen.
6 — Home Displays the Home screen.
7 — Recent Button Displays recently used applications.
8 — All Apps Icon Opens the APPS window.

Setting Home Screen Rotation

By default the Home screen rotation is disabled.

39
 Using the Device

To enable Home screen rotation:

1. Touch and hold anywhere on the Home screen until the options appear.
2. Touch HOME SETTINGS.
3. Touch the Allow Home screen rotation switch.

4. Touch .

5. Rotate the device.

Figure 29 Rotated Home Screen

Status Bar

The Status bar displays the time, notification icons (left side), and status icons (right side).

NOTE: Some Status icons may not appear in the Status bar if there are too many icons to display.

Figure 30 Notification and Status Icons

Notification Icons Status Icons

If there are more notifications than can fit in the Status bar, two dots display indicating that more notifications
exist. Swipe down from the Status bar to open the Notification panel and view all notifications and status.

Status Icons

Table 5 Status Icons

Icon Description
Alarm is active.

Main battery is fully charged.

Main battery is partially drained.

40
 Using the Device

Table 5 Status Icons (Continued)

Icon Description
Main battery charge is low.

Main battery charge is very low.

Main battery is charging.

All sounds, except media and alarms, are silenced and vibrate mode is active.

Do Not Disturb mode active.

Airplane Mode is active. All radios are turned off.

Bluetooth is on.

The device is connected to a Bluetooth device.

Connected to a Wi-Fi network.

Not connected to a Wi-Fi network or no Wi-Fi signal.

Connected to an Ethernet network.

Speakerphone enabled.

Indicates that the Orange key is locked.

Indicates that the Blue key is pressed.

Indicates that the Blue key is locked.

Indicates that the ALT key is pressed.

Indicates that the CTRL key is pressed.

Indicates that the Shift key is pressed.

Indicates that the Shift key is locked.

Indicates that the Large Key Indicator is selected.

NOTE: To enable the large key indicator, go to Settings > Accessibility > Display > Large Key Indicator.

Indicates that the Blue Key and SHIFT key are pressed enabling CAPSLOCK.

41
 Using the Device

Notification Icons

Table 6 Notification Icons

Icon Description
Main battery is low.

More notifications are available for viewing.

Data is syncing.

Indicates an upcoming event. GMS devices only.

Open Wi-Fi network is available.

Song is playing.

Problem with sign-in or sync has occurred.

Device is uploading data.

Device is downloading data when animated and download is complete when static.

Device is connected to or disconnected from virtual private network (VPN).

Preparing internal storage by checking it for errors.

USB debugging is enabled on the device.

Indicates that RxLogger app is running.

Indicates the Bluetooth scanner is connected to the device.

Indicates the RS6000 is connected to the device in HID mode.

Managing Notifications
Notification icons report the arrival of new messages, calendar events, alarms, and ongoing events. When a
notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons for a list of
possible notification icons and their description. Open the Notification panel to view a list of all the notifications.

To open the Notification panel, drag the Status bar down from the top of the screen.

42
 Using the Device

Figure 31 Notification Panel

To respond to a notification, open the Notification panel and then touch a notification. The Notification panel
closes and the corresponding app opens.

To clear all notifications, open the Notification panel and then touch CLEAR ALL. All event-based notifications
are removed. Ongoing notifications remain in the list.

To close the Notification panel, swipe the Notification panel up.

Setting App Notifications

To set notification settings for a specific app:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & notifications > Notifications > App notifications.
3. Select an app.
4. Select an available option:
• On / Off - Select to turn all notifications from this app On (default) or Off.
• Allow notification dot - Do not allow this app to add a notification dot to the app icon.
• Allow interruptions - Do not allow notifications from this app to make sound, vibrate, or pop
notifications on the screen.
• Override Do Not Disturb - Allow these notifications to interrupt when Do Not Disturb is set to Priority
Only.
• Categories - Do not allow specific types of notifications from this app.
• Additional settings in the app - Open the app settings.

NOTE: To change the notification settings for an app, slide the notification slightly left or right and touch .

43
 Using the Device

Viewing Notification Settings for All Apps

To view the notification settings for all apps:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Apps & Notifications.

3. Scroll down to Notifications to view how many apps have notifications turned off.
4. To set or view notifications settings for a specific app, see Setting App Notifications.

Controlling Lock Screen Notifications

To control whether notifications can be seen when the device is locked:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Apps & notifications > Notifications.

3. Touch On the lock screen and select one of the following:
• Show all notification content (default)
• Don’t show notifications at all.

Notification Indicator
The Charging/Notification LED lights blue when an app, such as email and VoIP, generates a programmable
notification or to indicate when the device is connected to a Bluetooth device. By default, LED notifications are
enabled.

To change the notification setting:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Apps & notifications > Notifications.

3. Touch Blink light to toggle the notification on or off.

Quick Access Panel

Use the Quick Access panel to access frequently used settings (for example, Airplane mode).

Figure 32 Quick Settings Bar

To see the full Quick Access panel:

• If the device is locked, swipe down once.
• If the device is unlocked, swipe down once with two fingers, or twice with one finger.
• If the Quick Settings bar is open, touch the Down arrow.

44
 Using the Device

Figure 33 Quick Access Panel

NOTE: Not all icons are pictured. Icons may vary.

To change a setting, touch the icon:

• Display brightness - Use the slider to decrease or increase the brightness of the screen.
• Wi-Fi network - Turn Wi-Fi on or off. To open Wi-Fi settings, touch the Wi-Fi network name.
• Bluetooth settings - Turn Bluetooth on or off. To open Bluetooth settings, touch Bluetooth.
• Do not disturb - Control how and when to receive notifications.
• Airplane mode - Turn Airplane mode on or off. When Airplane mode is on the device does not connect to
Wi-Fi or Bluetooth.
• Auto-rotate - Lock the device’s orientation in portrait or landscape mode or set to automatically rotate.
• Flashlight - Turn flashlight on or off. Turn camera flash on or off.
The thermal protection safety feature for the camera provides the following behavior if the temperature
range is 40°C or above:
• If the flashlight is kept on for a certain period of time, it is automatically turned off and cannot be turned
back on for a period of time until it has cooled off.
• During the cooling off period, the camera cannot be turned on. If you attempt to use the camera, a
message displays indicating to try again after a period of time.
• Cast - Share phone content on Chromecast or a television with Google Cast built-in. Touch cast screen to
display a list of devices, then touch a device to begin casting.

Editing Icons on Quick Settings

The first several setting tiles from the Quick Access panel become the Quick Settings bar.

To move a setting tile:

1. Open the Quick Access panel.

2. Touch .

3. Touch and drag a setting tile to another location.

4. Release the tile.

45
 Using the Device

5. Touch to save tiles and return to the Quick Access panel.

To add a setting tile:

1. Open the Quick Access panel.

2. Touch .

3. Slide the Quick Settings panel up to reveal additional tiles.

4. Touch and drag a setting tile from the Drag to add tiles area to the main area.
5. Release the tile.

6. Touch to save tiles and return to Quick Access panel.

To remove a setting tile:

1. Open the Quick Access panel.

2. Touch .

3. Touch and drag a setting tile to the Drag here to remove area.
4. Release the tile.

5. Touch to save tiles and return to Quick Access panel.

App Shortcuts and Widgets

App shortcuts placed on the Home screen allow quick and easy access to apps. Widgets are self-contained
apps placed on the Home screen to access frequently used features.

Adding an App Shortcut to the Home Screen

To add an app shortcut to the Home screen:
1. Go to the desired Home screen.
2. Swipe up from the bottom of the screen.
3. Scroll through the list to find the app icon.
4. Touch and hold the icon until the Home screen appears.
5. Position the icon on the screen and then release.

Adding a Widget to the Home Screen

To add a widget to the Home screen:
1. Go to the desired Home screen.
2. Touch and hold until the menu appears.
3. Touch WIDGETS.
4. Scroll through the list to find the widget.
5. Touch and hold the widget until the Home screen appears.

46
 Using the Device

6. Position the widget on the screen and then release.

Moving Items on the Home Screen

To move app shortcuts or widgets on the Home screen:
1. Touch and hold the item until it floats on the screen.
2. Drag the item to a new location. Pause at the edge of the screen to drag the item onto an adjacent Home
screen.
3. Lift finger to place the item on the Home screen.

Removing an App Shortcut or Widget from the Home Screen

To remove an app shortcut or widget from the Home screen:
1. Go to the desired Home screen.
2. Touch and hold the app shortcut or widget icon until it floats on the screen.
3. Drag the icon to X Remove at the top of the screen and then release.

Folders

Use Folders to organize similar applications together. Tap the folder to open and display items in the folder.

Creating a Folder
There must be at least two app icons on the Home screen.

To create a folder:
1. Go to the desired Home screen.
2. Touch and hold one app icon.
3. Drag the icon and stack on top of another icon.
4. Lift and release.

Naming Folders
To name a folder:
1. Touch the folder.

Figure 34 Open Folder

Title Area

47
 Using the Device

2. Touch the title area and enter a folder name using the keyboard.

3. Touch on the keyboard.

4. Touch anywhere on the Home screen to close the folder. The folder name appears under the folder.

Removing a Folder
To remove a folder:
1. Touch and hold the folder icon until it enlarges.
2. Drag the folder to X Remove and release.

Home Screen Wallpaper

To change the Home screen wallpaper:

1. Touch and hold the screen until the menu appears.
2. Touch WALLPAPERS.
3. Touch Photos or Gallery to select a photo or select one of the pre-installed wallpapers.
4. Touch Set wallpaper.

Using the Touchscreen

Use the multi-tap sensitive screen to operate the device.
• Tap - Tap to:
• Select items on the screen.
• Type letters and symbols using the on-screen keyboard.
• Press on-screen buttons.
• Tap and Hold - Tap and hold:
• An item on the Home screen to move it to a new location or to the trash.
• An item in Apps to create a shortcut on the Home screen.
• The Home screen to open a menu for customizing the Home screen.
• An empty area on the Home screen until the menu appears.
• Drag - Tap and hold an item for a moment and then move finger on the screen until reaching the new
position.
• Swipe - Move finger up and down or left and right on the screen to:
• Unlock the screen.
• View additional Home screens.
• View additional app icons in the Launcher window.
• View more information on an app’s screen.
• Double-tap - Tap twice on a web page, map, or other screen to zoom in and out.
• Pinch - In some apps, zoom in and out by placing two fingers on the screen and pinching them together (to
zoom out) or spreading them apart (to zoom in).

48
 Using the Device

Keyboards
The device provides the following types of keyboards:
• Gboard
• Enterprise Keyboard

NOTE: By default the Enterprise and Virtual Keyboards are disabled.

Virtual Keyboard Configuration

Enabling Virtual Keyboards

To enable virtual keyboards:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch System > Languages & input > Virtual keyboard.

3. Touch Show virtual keyboard.
4. Touch Manage keyboards.
5. Touch a keyboard to enable.

Switching Between Virtual Keyboards

To switch between keyboards, touch in a text box to display the current keyboard.
• On the Gboard keyboard, touch and hold .
• On the Enterprise keyboard, touch .

Physical Keyboard Configuration

Enabling Physical Keyboards

To enable physical keyboards:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch System > Languages & input > Physical keyboard.

3. In the Keyboard assistance area, touch Show virtual keyboard.
4. Touch Keyboard shortcuts helper to view available shortcuts.
5. In the Keyboard press area, touch Sound on keypress.
6. Touch Volume on keypress to adjust the audible click on keypress. The default volume is set at 50%.

Using the Enterprise Keyboard

The Enterprise Keyboard contains the following keyboards:

• Numeric

49
 Using the Device

• Alpha
• Special characters
• Data capture.

NOTE: The Enterprise keyboard supports English (US), English (UK), French, German, Spanish and Italian. When a key-
board language is selected in Settings, the corresponding keyboard language displays.

Numeric Tab
To access the numeric keyboard, touch the 123 tab. The keys displayed vary on the app being used. For
example, an arrow displays in Contacts, however Done displays in Email account setup.

Figure 35 Numeric Keyboard

Alpha Tab
To access the alpha keyboard, touch the EN tab.

Figure 36 Alpha Keyboard

Additional Character Tab

To access additional characters, touch the #*/ tab.

Figure 37 Symbols Keyboard

50
 Using the Device

Touch to enter emoji icons in a text message.

Figure 38 Emoji Keyboard

Touch ABC to return to the Symbols keyboard.

Scan Tab
The Scan tab provides an easy data capture feature for scanning barcodes.

Figure 39 Scan Keyboard

Do Not Disturb Feature

This mode mutes the device so that it does not make sounds or vibrate.

For example, use Do Not Disturb to:

• Automatically limit sounds at night or during events
• Mute interruptions other than alarms
• Get alerted to messages only from favorite contacts.

Limit Sounds and Vibrations

Mute the device completely, or let through the important alarms or important calls.

Total Silence
To completely mute the device so that it does not make a sound or vibrate, choose Total silence.

In Total silence mode:

• Alarms do not make noise.
• Device does not vibrate or make sounds when receiving a message, or notification.
• Sounds from music, videos, games, and other media are muted.

51
 Using the Device

NOTE: All alarms are silenced in Total silence mode.

1. Swipe down with two fingers from the Status bar to open the Quick Access panel.
2. Touch Do not disturb > Total silence.
3. Choose Until you turn it off or select a time period.
4. Touch Done.
When Total Silence is on, appears in the quick access panel and the Status bar.

To turn off Total Silence, open quick access panel and touch Total silence.

Alarms Only
To mute the device so that you hear alarms, choose Alarms only. This option does not mute sounds from
music, videos, games, or other media.
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch Do not disturb > Alarms only.
3. Choose Until you turn it off or select a time period.
4. Touch Done.
When Alarms Only is on, appears in the quick access panel and the Status Bar.

To turn off Alarms Only, open the Quick Access panel and touch Alarms only.

NOTE: To quickly turn on Alarms Only, with the screen on, press and hold the Volume Down button until the volume is all
the way down. Then, press Volume Down again to turn on Alarms Only.

To turn off Alarms Only, press either the Volume Up or Volume Down button and the touch END NOW in the
alert message.

Priority Notifications Only

To only be interrupted by important notifications, choose Priority only. This option does not mute sounds from
music, videos, games, or other media.

Before turning on Priority Only mode, set the notification priorities:

1. Swipe down from the status bar to open the quick settings bar and then touch .

2. Touch Sound > Do not disturb > Priority only allows.

3. Set priorities.
• Alarms: Disabled by default.
• Reminders and Events: Switch on or off.
• Messages: Choose From anyone, From contacts only, From starred contacts only, or none. To
star contacts, use the Contacts applications.
• Repeat callers: Choose whether to let the device ring if the same person calls again within 15 minutes.

After setting notification priorities, turn on Priority Only mode to limit interruptions. The priority notifications
make a sound or vibrate based on the current ringer volume, but other notifications will be silenced.
1. Swipe down with two fingers from the status bar to open the quick access panel.

52
 Using the Device

2. Touch Do not disturb > Priority only.

3. Choose Until you turn it off or select a time period.
4. Tap Done.
When Priority Only is on, appears in the quick access panel and the Status Bar.

To turn off Priority Only, open quick access panel and touch Priority only.

Silence Sounds During Certain Times

To automatically silence the device during certain times, like at night or on weekends:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Sound > Do Not Disturb preferences.

3. Touch a default Weekend or Weeknight. Or, to make a new rule, touch Add more > Time rule.
4. Enter a rule name.
5. Touch OK.
6. Edit the new rule:
• Rule name - Rename the rule.
• Days, Start time, and End time - Set the rule's schedule.
• Do Not Disturb preferences - Choose whether the rule uses Alarms only, Priority only, or Total
silence.
• Alarm can override end time - Allow the alarm to continue to make sound until the next alarm begins.
7. Touch the On/Off switch at the top to turn on the rule.

Silence Sounds During Events and Meetings

To automatically silence the device during events or meetings, set an event rules.

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Sound > Do Not Disturb preferences.

3. To edit the default rule, touch Event. Or, to create a new rule, touch Add rule > Event rule.
4. Edit the rule settings.
• Rule name - Rename the rule.
• During events for - Select which Google Calendar events the rule uses.
• Where reply is - Set to: Yes, Maybe, or Not replied, Yes or Maybe, or Yes.
• Do Not Disturb preferences - Choose whether the rule uses Priority only, Alarms only, or Total
silence.
5. Touch the On/Off switch at the top to turn on the rule.

Turn Sounds Back On

When the device is in Do Not Disturb mode, Alarms only or Priority only display as , or Total silence displays
as .

To turn off Do Not Disturb, either:

53
 Using the Device

• In the Quick Access panel, touch Alarms only, Priority only, or Total silence.
• Press the Volume Down button and touch End Now.

Override Do Not Disturb for Specific Apps

To let through notifications from specific apps:

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Apps & notifications > Notifications > App notifications.

3. Touch an app.
4. Touch Override Do Not Disturb.

Apps
The APPS screen displays icons for all installed apps. The table below lists the apps installed on the device.
Refer to the device Integrator Guide for Android Version 8.1 for information on installing and uninstalling apps.

Table 7 Apps

Icon Description
Battery Manager - Displays battery information, including charge level, status, health and wear
level.

Bluetooth Pairing Utility – Use to pair with the device by scanning a barcode.

Calculator - Provides the basic and scientific arithmetic functions.

Calendar - Use to manage events and appointments.

Camera - Take photos or record videos. For more information see Camera.

Chrome - Use to access the Internet or intranet.

Clock - Use to schedule alarms for appointments or as a wake-up.

Contacts - Use to manage contact information. See Contacts for more information.

54
 Using the Device

Table 7 Apps (Continued)

Icon Description
DataWedge - Enables data capture using the imager.

Device Central - Use to display detailed information about the device and connected
peripherals. See Device Central for more information.

Diagnostic Tool - Use to diagnose the device.

Drive - Upload photos, videos, documents, and other files to personal storage site.

Duo - A one-to-one video calling app (WWAN only).

DWDemo - Provides a way to demonstrate the data capture features using the imager. See
DataWedge Demonstration for more information.

Email - Use to send and receive email.

Files - Organize and manage files on the device. See Files for more information.

Gmail - Use to send and receive email using a Google email account.

Google - Launches Google ™ search app.

Hangouts - Use to communicate with friends using text messages and photos.

Heater Control - Use to check the status on the heater and sensors when using the device in
cold environments. For more information, see Heater Control.

Keep- Use to create, edit, and share notes.

License Manager - Use to manage software licenses on the device.

55
 Using the Device

Table 7 Apps (Continued)

Icon Description
Maps - Use to see your location on a map (with public transit, traffic, or satellite overlays).
Search for any business or place of interest. Provides turn-by-turn navigation with voice
guidance, traffic-avoidance, and alternate routes, for drivers, cyclists, walkers, and users of
public transportation.
Photos - Use to sync photos with Google account. For more information, see Photo Settings.

Play Movies & TV - View movies and video on your device.

Play Music - Use to listen to music.

Play Store - Download music, movies, books, and Android apps and games from the Google
Play Store.

PTT Express - Use to launch PTT Express client for VoIP communication.

RxLogger - Use to diagnose device and app issues. See the device Integrator Guide for
Android Version 8.1 for more information.

RxLogger Utility - Use to view, backup, and archive RxLogger data.

Settings - Use to configure the device.

Sound Recorder - Use to record audio.

StageNow - Allows the device to stage a device for initial use by initiating the deployment of
settings, firmware, and software.

Velocity - Opens the Ivanti (formerly Wavelink) terminal emulation app.

Voice Search - Use to perform searches by asking questions.

56
 Using the Device

Table 7 Apps (Continued)

Icon Description
Worry Free Wifi Analyzer - A diagnostic intelligent app. Use to diagnose surrounding area and
display network stats, such as coverage hole detection, or AP in vicinity. Refer to the Worry Free
Wi-Fi Analyzer Administrator Guide for Android.
YouTube - Use to view videos on the YouTube ™ web site.

Zebra Bluetooth - Use to configure Bluetooth logging.

Accessing Apps
All apps installed on the device are accessed using the APPS window.
1. On the Home screen, swipe up from the bottom of the screen.

Figure 40 APPS Window Example

Slide the APPS window up or down to view more app icons. Touch an icon to open the app.

Switching Between Recent Apps

To switch between recent apps:

1. Touch . A window appears on the screen with icons of recently used apps.

57
 Using the Device

Figure 41 Recently Used Apps

2. Slide the apps displayed up and down to view all recently used apps.
3. Swipe left or right to remove app from the list and force close the app.

4. Touch an icon to open an app or touch to return to the current screen.

Un-Locking the Screen

Use the Lock screen to protect access to data on the device. Some email accounts require locking the screen.
Refer to the device Integrator Guide for information on setting up the locking feature.

When locked, a pattern, PIN, or password is required to unlock the device. Press the Power button to lock the
screen. The device also locks after a pre-defined time-out.

Press and release the Power button to wake the device. The Lock screen displays. Swipe the screen up to
unlock. If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.

58
 Using the Device

Figure 42 Lock Screen

Figure 43 PIN Screen

59
 Using the Device

Figure 44 Pattern Screen

Figure 45 Password Screen

Smart Lock

Keep the device unlocked in some situations, like when the device is in your holster or near a specific location.
With Smart Lock, the user will not need to unlock the device with a PIN, pattern, or password.

To enable Smart Lock:

60
 Using the Device

1. Ensure that a screen lock feature (PIN, pattern, or password) is enabled.

2. Swipe down from the Status bar to open the Quick Settings bar and then touch .

3. Touch Security & location > Smart Lock.

4. Enter the PIN, pattern, or password to continue.

Figure 46 Smart Lock Screen

5. Select one of the options:

• On-body detection
• Trusted places
• Trusted devices
• Trusted face
• Voice Match.
6. Follow the on-screen instructions for setting up each option.

Resetting the Device

The reset functions include the following:
• Soft reset
• Hard reset
• Enterprise reset- Refer to the device Integrator Guide for more information.
• Factory reset - Refer to the device Integrator Guide for more information.

61
 Using the Device

Performing a Soft Reset

Perform a soft reset if applications stop working.
1. Press and hold the Power button until the menu appears.
2. Touch Restart.
The device reboots.

Performing a Hard Reset

CAUTION: Performing a hard reset with a microSD card installed in the device may cause damage or data corruption to the
microSD card. All un-saved data is lost after performing a hard reset.

Perform a hard reset if the device stops responding.

1. Simultaneously press the Power, Center Scan and Trigger buttons for at least four seconds.
2. When the screen turns off, release the buttons.
The device reboots.

Suspend Mode
The device goes into suspend mode when you press the Power button or after a period of inactivity (set in the
Display settings window).

To wake the device from Suspend mode, press the Power button or the configured wake-up sources. The Lock
screen displays. Swipe the screen up to unlock. If the Pattern screen unlock feature is enabled, the Pattern
screen appears instead of the Lock screen. If the PIN or Password screen unlock feature is enabled, enter the
PIN or password after unlocking the screen. See Un-Locking the Screen.

NOTE: If you enter the PIN, password, or pattern incorrectly five times, you must wait 30 seconds before trying again.
If you forget the PIN, password, or pattern contact your system administrator.
The device will wake on the detection of AC/DC power if it is either in suspend mode or powered off.

Transferring Files with a Host Computer via USB

Connect the device to a host computer using a USB cradle to transfer files between the device and the host
computer.

When connecting the device to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files.

Transferring Files
NOTE: Use Transfer files to copy files between the device (internal memory) and the host computer.

1. Place the device into a USB cradle or into the USB snap on cup.
2. Pull down the Notification panel and touch USB charging this device.
By default, Charge this device is selected.

62
 Using the Device

Figure 47 Use USB to Dialog Box

3. Touch Transfer files.

4. On the host computer, open a file explorer application.
5. Locate the device as a portable device.
6. Open the Internal storage folder.
7. Copy files to and from the device or delete files as required.

Transferring Photos

To transfer photos using Photo Transfer Protocol:

NOTE: Use Photo Transfer Protocol (PTP) to copy photos from the internal memory to the host computer.

1. Place the device into a USB cradle.

2. Pull down the Notification panel and touch USB charging this device.
3. Touch Transfer photos (PTP).
4. On the host computer, open a file explorer application.
5. Open the Internal storage folder.
6. Copy or delete photos as required.

Disconnect from the Host Computer

To disconnect the device from the host computer:

CAUTION: Carefully follow the host computer’s instructions to disconnect USB devices correctly to avoid losing information.

1. On the host computer, unmount the device.

2. Remove the device from the cradle.

63
Applications

Introduction
This section describes the applications installed on the device.

Battery Manager
The Battery Manager provides detailed information about the battery.

To open Battery Manager, swipe up from the bottom of the Home screen and touch .

64
 Applications

Figure 48 Battery Manager Screen

Table 8 Battery Icon Description

Battery Description
Icon
Battery charge level.

Battery charging.

Battery charge level is below 15 (Standard Battery) and

9% (Freezer Battery)%.

• Battery level - The current battery charge level as a percentage. Displays -% when level is unknown.
• Time until full - The amount of time until the battery is fully charged.
• Time since charging - The amount of time since the device began charging.
• Time until empty - The amount of time until the battery is empty.
• Battery status
• Not charging - The device is not charging.
• Charging over AC - The device is connected to AC power and charging.
• Charging over USB - The device is connected to a host computer with a USB cable and charging.
• Discharging - That the battery is discharging.
• Full - That the battery is fully charged.
• Unknown - The battery status is unknown.

65
 Applications

• Battery health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
• Decommission - The battery is past its useful life and should be replaced. See system administrator.
• Good - The battery is good.
• Charge error - An error occurred while charging. See system administrator.
• Over Current - An over-current condition occurred. See system administrator.
• Dead - The battery has no charge. Replace the battery.
• Over Voltage - An over-voltage condition occurred. See system administrator.
• Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
• Failure Detected - A failure has been detected in the battery. See system administrator.
• Unknown - See system administrator.
• Wear level - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
• Advanced info - Touch to view additional battery information.
• Battery present status - Indicates that the battery is present.
• Battery level - The battery charge level as a percentage of scale.
• Battery scale - The battery scale level used to determine battery level (100).
• Battery voltage - The current battery voltage in millivolts.
• Battery temperature - The current battery temperature in degrees Centigrade.
• Battery technology - The type of battery.
• Battery current - The average current into or out of the battery over the last second in mAh.
• Battery manufacture date - The date of manufacture.
• Battery serial number - The battery serial number. The number matches the serial number printed on
the battery label.
• Battery part number - The battery part number.
• Battery rated capacity - Lists the rated capacity of the backup battery in mAh.
• Battery decommission status - Indicates if the battery is past its life span.
• Battery Good - The battery is in good health.
• Decommissioned Battery - The battery is past its useful life and should be replaced.
• Base cumulative charge - Cumulative charge using Zebra charging equipment only.
• Battery present capacity - Maximum amount of charge that could be pulled from the battery under the
present discharge conditions if the battery were fully charged.
• Battery health percentage - With a range from 0 to 100, this is the ratio of “present_capacity” to
“design_capacity” at a discharge rate of “design_capacity”.
• % decommission threshold - The default % decommission threshold for a gifted battery as 80%.
• Battery present charge - Amount of usable charge remaining in the battery at present under the
current discharge conditions.
• Battery total cumulative charge - The total accumulated charge in all chargers.
• Battery time since first use - The time passed since the battery was placed in a Zebra terminal for the
first time.
• Battery error status - The error status of the battery.
• App version - The application version number.

66
 Applications

Heater Control
The Heater Control application provides information about the sensors and heater applicable to the freezer
device. To open the Heater Control, swipe up from the bottom of the Home screen and touch .

IMPORTANT: Heater Control app is only applicable to freezer configurations.

The scanner exit window heater ensures optimum scanner performance in freezer applications.

Status

Figure 49 Heater Control - Status

The Status tab displays:

TEMPERATURE for the following:

• Display
• Vent
• Scanner Window
• Scanner Bay.

HUMIDITY for the following:

• Vent

67
 Applications

HEATER for the following:

• Scanner Window (default - enabled). This option should always be enabled for the heater to function
properly. Disable this option only if you are performing debugging activities on the heater system.

Advanced

Figure 50 Heater Control - Advanced

• In the HEATER area, tap to disable SCANNER WINDOW HEATER. By default this option is enabled.
• In the ADVANCED area, tap to enable LOGGING. Logging allows you to log data for the heating system
(heaters and sensors). The data resides in the /sdcard/HeaterLogs location in a .csv file on the device.
• Click TEST HEATER to perform a diagnostic test on the heating system.

NOTE: Heater tests must be performed in an ambient environment with temperature of less than +30° C.

68
 Applications

Figure 51 Heater Test

Once the tests are complete the results screen displays.

Figure 52 Heater Test (Status after Functional Check)

69
 Applications

Files
Use the Files app to view and manage files on the device.

To open Files, swipe up from the bottom of the screen and touch .

Figure 53 Files Screen

Sort

• Touch and hold an item to open the File Operations menu. Select an option:
• - Share the file with other devices.
• - Delete the file.
• - View additional options.
• Open with - Select which app is used to open the file.
• Select all - Select all folders and files.
• Copy to... - Copy the file.
• Move to... - Move the file or folder to a new location.
• Compress - Compress the selected file(s) into a ZIP file.
• Rename - Rename the file.
• Touch the Sort drop-down to sort files by name, type, size, or date.
• - View all file locations.
• - Search for a specific file on the device.
• / - Change the folder to display items as a list / grid.
• - Open the options menu.
• New Window - Create a new Files window.
• New Folder - Create a new folder.
• Select all - Select all folders and files.
• Show/Hide internal storage - Show or hide internal storage.

70
 Applications

Contacts
Use the Contacts app to manage contacts.

From a Home or Apps screen, touch Contacts to open to the main list of contacts. Contacts are listed in
alphabetical order. Swipe up or down to scroll through the list.

Adding a Contact

1. In the Contacts app, touch .

2. If there is more than one account with contacts, touch the one you want to use.
3. Type the contact’s name and other information. Touch a field to start typing, and swipe down to view all
categories.
4. To open a menu with preset labels, such as Home or Work for an email address, touch the label to the right
of the item of contact information. Or, to create your own label, touch Custom in the menu.
5. Touch the check mark next to Add New Contact.

Editing Contacts

1. In the Contacts app, touch a contact name to edit.

2. Touch .

3. Edit the contact information.

4. Touch SAVE.

Deleting Contacts

1. In the Contacts app, touch a contact name to delete.

2. Touch .
3. Touch Delete.
4. Touch DELETE to confirm.

71
 Applications

Camera
This section provides information for taking photos and recording videos using the integrated digital cameras.

The device saves photos and videos on the microSD card, if installed and the storage path is changed manually. By
default, or if a microSD card is not installed, the device saves photos and videos on the internal storage. On SDM660
platform-based products, you can use the imager and camera simultaneously. By default, third-party camera
applications are associated with the Datawedge Profile0 where scanning is enabled. In these applications the
Scan button initiates the scan session. If you do not want scanning to be enabled in the application, you must
associate a new Datawedge profile with the application and disable scanning.

NOTE: The native Google camera application is associated with a hidden DataWedge profile. The scanning functionality is
temporarily disabled when the Google camera application is being used. If a third-party camera application is utilized the
scanning functionality will not be disabled allowing the simultaneous use of the scanner and the camera. This will have a
direct impact on the image quality. It is strongly recommended that you use the native Google camera application.

72
 Applications

Taking Photos
NOTE: See Photo Settings for camera setting descriptions.

1. Swipe up from the bottom of the Home screen and touch Camera.

Figure 54 Camera Mode

Filters Camera Switch

HDR

Scene Mode Settings

Gallery Camera Mode

Shutter Button

2. If necessary, touch the Camera Mode icon and touch .

3. To switch between the rear camera and front camera (if available), touch .

4. Frame the subject on the screen.

5. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear
on the screen.
6. Touch an area on the screen to focus. The focus circle appears. The two bars turn green when in focus.

7. Touch .
The camera takes a photo and a shutter sound plays.
The photo momentarily displays as a thumbnail in the lower left corner.

73
 Applications

Taking a Panoramic Photo

Panorama mode creates a single wide image by panning slowly across a scene.
1. Swipe up from the bottom of the Home screen and touch Camera.

Figure 55 Panoramic Mode

2. Touch the Camera Mode icon and touch .

3. Frame one side of the scene to capture.

4. Touch and slowly pan across the area to capture. A small white square appears inside the button
indicating the capture is in progress.
If you are panning too quickly, the message Too fast appears.

5. Touch to end the shot. The panorama appears immediately and a progress indicator displays while it
saves the image.

Recording Videos

1. Swipe up from the bottom of the Home screen and touch Camera.

2. Touch the camera mode menu and touch .

Figure 56 Video Mode

74
 Applications

Camera Switch
Color Effect Audio

Settings

Gallery Camera Mode

Shutter Button

3. To switch between the rear camera and front camera (if available), touch .

4. Point the camera and frame the scene.

5. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear
on the screen.

6. Touch to start recording.

The video time remaining appears in the top left of the screen.

7. Touch to the end recording.

The video momentarily displays as a thumbnail in the lower left corner.

Photo Settings

In Photo mode, photo settings appear on screen. Touch to display the photo settings options.

75
 Applications

Rear Camera
• Flash - Select whether the camera relies on its light meter to decide whether a flash is necessary, or to turn
it on or off for all shots.

• Off - Disable flash.

• Auto - Adjust flash automatically depending upon light meter (default).

• On - Enable flash upon taking a photo.

• Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M pixels,
HD 1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
• Picture quality - Set the picture quality setting to: Low, Standard (default) or High.
• Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.
• Storage – Set the location to store the photo to: Phone or SD Card.
• Face Detection - Select to turn face detection Off (default) or On.
• ISO - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800
or ISO1600.
• Exposure - Set the exposure settings to: +2, +1, 0(default), -1 or -2.
• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors:

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Chroma Flash - Sets the camera to take two pictures, one with flash and one without flash. The two
images are combined to produce a final image with the sharpness and clarity and bright color tones from a
picture with the flash, coupled with the natural colors of a picture without a flash. Options: Off (default) or
On.
• Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
• ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled).
• Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not constant.
These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The
camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.

Video Settings
In Video mode, video settings appear on screen. Touch to display the video settings options.

76
 Applications

Rear Camera
• Flash - Select whether Rear-facing Camera relies on its light meter to decide whether a flash is necessary,
or to turn it on or off for all shots.

• Off - Disable flash (default).

• Torch - Turn flash on continuously.

• Video quality - Set video quality to: HD 1080p (default), HD 720p, SD 480p.
• Video duration - Set to: 30 seconds (MMS), or 30 minutes (default).
• Storage – Set the location to store the photo to: Phone (default) or SD Card.
• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Image Stabilization - Set to reduce blurry videos due to device movement. Options: On or Off (default).

77
 Applications

Photos
NOTE: The device supports the following image formats: jpeg, gif, png, and bmp.

The device supports the following video formats: H.263, H.264, and MPEG4 Simple Profile.

Available on device with GMS only.

Use Photos to:

• View photos
• Play videos
• Perform basic editing of photos
• Set photos as wallpaper
• Set photos as a contact photo
• Share photos and videos.

Photos presents all photos and videos stored on the internal memory.

To open Photos, swipe up from the bottom of the Home screen and touch Photos.

By default, Photos opens to the photos view.

Figure 57 Photos View

Touch Albums to view photos sorted by albums.

78
 Applications

Figure 58 Albums View

• Touch an album to view its contents. The photos and videos in the album appear in chronological order.
• Touch a photo or video in an album to view it.
• Touch to return to the main screen.

Working with Albums

Albums are groups of images and videos in folders. Touch an album to open it. The photos and videos are
listed in a chronologically ordered grid. The name of the album displays at the top of the screen.

79
 Applications

Figure 59 Photos Inside an Album

Swipe up to scroll through the images.

Sharing an Album

1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch Albums.
3. Touch an album.

4. Touch > Select.

5. Select all photos in the album.

6. Touch . The Share menu opens.

7. Touch an app to share the selected albums.

8. Follow the instructions within the selected app.

Deleting an Album
To delete an album and its contents:
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch Albums.
3. Touch an album.

4. Touch > Select.

5. Select all photos in the album.

6. Touch .

80
 Applications

7. Touch Move to trash to delete the album.

Working with Photos

Use Photos to view photos on the internal memory.

Viewing and Browsing Photos

1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo.

Figure 60 Photo Example

3. Swipe left or right to view the next or previous photo in the album.
4. Turn the device to view the photo in upright (portrait) or sideways (landscape) orientation. The photo is
displayed (but not saved) in the new orientation.
5. Touch the photo to view the controls.
6. Double-tap the screen to zoom in, or pinch two fingers together or spread them apart to zoom in or out.
7. Drag the photo to view parts that are not in view.

Cropping a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo to view the controls.

3. Touch > . The cropping tool appears.

81
 Applications

Figure 61 Cropping Tool

4. Use the cropping tool to select the portion of the photo to crop.
• Drag from the inside of the cropping area to move it.
• Drag an edge of the cropping area to resize it to any proportion.
5. Touch DONE.
6. Touch SAVE to save a copy of the cropped photo. The original version is retained.

Setting a Photo as a Contact Icon

1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch the photo to open it.

3. Touch > Use as.

4. Touch Contact photo.

5. In the Contacts app, touch a contact.
6. Touch the white box and crop the photo accordingly.
7. Touch Done.

Sharing a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch an album to open it.
3. Touch a photo to open it.

4. Touch .

82
 Applications

5. Touch the app to use to share the selected photo.

6. Follow the instructions within the selected app.

Deleting a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo to open it.

3. Touch .

4. Touch MOVE TO TRASH.

Working with Videos

Use Photos to view and share videos.

Watching a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a video to play.
3. Touch the screen to view the playback controls.

Sharing a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a video to open it.

3. Touch . The Share menu appears.

4. Touch the app to use to share the selected video.

5. Follow the instructions within the selected app.

Deleting a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a video to open it.

3. Touch .

4. Touch MOVE TO TRASH to delete the video.

83
 Applications

DataWedge Demonstration
NOTE: DataWedge is enabled on the Home screen.To disable this feature, go to the DataWedge settings and disable the
Launcher profile.

Use DataWedge Demonstration to demonstrate data capture functionality.

Figure 62 DataWedge Demonstration Window

Table 9 DataWedge Demonstration Icons

Icon Description
Illumination Imager illumination is on. Touch to turn illumination off.

Imager illumination is off. Touch to turn illumination on.

Data Capture The data capture function is through the internal imager.

A Bluetooth scanner is connected.

A Bluetooth scanner is not connected.

The data capture function is through the rear camera.

84
 Applications

Table 9 DataWedge Demonstration Icons (Continued)

Icon Description
Scan Mode Imager is in picklist mode. Touch to change to normal scan mode.

Imager is in normal scan mode. Touch to change to picklist mode.

Opens a menu to view the application information or to set the

application DataWedge profile.

NOTE: See the device Integrator Guide for Android Version 8.1 for information on DataWedge configuration.

Scanner Selection

To select a scanner, touch > Settings > Scanner selection.

See Data Capture for more information.

Either press the programmable button or touch the yellow scan button to capture data. The data appears in the
text field below the yellow button.

85
 Applications

Sound Recorder
Use Sound Recorder to record audio messages.

Recordings are saved on the microSD card (if installed) or the internal storage and are available in the Play
Music application (GMS devices).

Figure 63 Sound Recorder Application

PTT Express Voice Client

NOTE: PTT Express Voice Client enables Push-To-Talk (PTT) communication between disparate enterprise devices. Le-
veraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers simple PTT communication
without requiring a voice communication server.

• Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
• Private Response: Double-press the PTT button to respond to the originator of the last broadcast or to
make a Private Response.

86
 Applications

PTT Audible Indicators

The following tones provide helpful cues when using the voice client.
• Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for you to start talking.
• Access Tone: Single beep. Plays when another user just finished a broadcast or response. You can now
initiate a Group Broadcast or Private Response.
• Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds).
• Network Tone:
• Three increasing pitch beeps. Plays when PTT Express acquires the WLAN connection and the service
is enabled.
• Three decreasing pitch beeps. Plays when PTT Express loses the WLAN connection or the service is
disabled.

PTT Notification Icons

Notification icons indicate the current state of the PTT Express Voice client.

Table 10 PTT Express Icon Descriptions

Status Icon Description

The PTT Express Voice client is disabled.

The PTT Express Voice client is enabled but not connected to a WLAN.

The PTT Express Voice client is enabled, connected to a WLAN, and listening on the Talk
Group indicated by the number next to the icon.

The PTT Express Voice client is enabled, connected to a WLAN, and communicating on the
Talk Group indicated by the number next to the icon.

The PTT Express Voice client is enabled, connected to a WLAN, and in a private response.

The PTT Express Voice client is enabled and muted.

The PTT Express Voice client is enabled but it is not able to communicate due to a VoIP
telephony call in progress.

Enabling PTT Communication

1. Swipe up from the bottom of the Home screen and touch .

2. Slide the Enable/Disable Switch to the ON position. The button changes to ON.

87
 Applications

Selecting a Talk Group

One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be enabled
at a time on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.

PTT Communication

NOTE: This section describes the default PTT Express client configuration. Refer to the PTT Express V1.2 User Guide for
detailed information on using the client.

Figure 64 PTT Button

P1 - Dedicated PTT Key

Creating a Group Call

1. Press and hold the PTT button (or the Talk button on the headset) and listen for the talk tone.
If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure that
PTT Express and the WLAN are enabled.
2. Start talking after hearing the talk tone.

NOTE: Holding the button for more than 60 seconds (default) drops the call, allowing others to make Group calls. Release
the button when finished talking to allow others to make calls.

Responding with a Private Response

The Private Response can only be initiated once a Group Call has been established. The initial Private
Response is made to the originator of the Group Call.
1. Wait for an access tone.
2. Within 10 seconds, double-press the PTT button, and listen for the talk tone.

88
 Applications

3. If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure that
PTT Express and the WLAN are enabled.
4. Start talking after the talk tone plays.
5. Release the button when finished talking.

Disabling PTT Express Voice Client Communication

1. Swipe up from the bottom of the Home screen and touch .

2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF.

3. Touch .

89
 Applications

RxLogger
RxLogger is a comprehensive diagnostic tool that provides app and system metrics. Create custom plug-ins
that work seamlessly with this tool. RxLogger diagnoses device and application issues, and tracks information
for: CPU load, memory load, memory snapshots, battery consumption, power states, wireless logging, TCP
dumps, Bluetooth logging, logcat, ANR dumps, etc. All logs and files generated are saved in flash storage on
the device (internal or external).

Figure 65 RxLogger

90
 Applications

RxLogger Utility
RxLogger Utility is a data monitoring application for viewing logs in the device while RxLogger is running.
Access the logs and RxLogger Utility features in the App View or the Overlay View.

In the App View, view logs in the RxLogger Utility.

Figure 66 RxLogger Utility App View

Refer to the for detailed information on the RxLogger Utility.

91
 Applications

Diagnostic Tool
The Diagnostic Tool is a utility that determines the health of the device. Use the Diagnostic Tool to
troubleshoot the device.

1. Swipe up from the bottom of the Home screen and touch .

Figure 67 Diagnostic Tool

2. Touch RUN TEST. The app tests all enabled subsystems (by default, only the Battery and System tests).
See Settings to enable subsystem tests.

92
 Applications

Figure 68 Test Passed Screen

Figure 69 Test Failed Screen

3. To view each subsystem test, touch Subsystem Tests.

93
 Applications

Figure 70 Subsystem Screen

4. Touch one of the subsystems to view details.

Table 11 Subsystem Test Result Indicators

Status Icon Description

Test passed.

Test failed.

Test not supported or not enabled.

94
 Applications

Figure 71 Battery Subsystem Details

Settings

By default only the Battery and System tests are enabled. To enable other tests:

1. Touch > Settings.

2. Touch to the left of the test name. A green box with a checkmark appears.
3. Touch SAVE.
4. Touch Yes to confirm.

5. Touch .

Battery Test Information

The Battery Test obtains the following information:

• Battery Level - Current battery charge level
• Battery Voltage - Current battery voltage
• Status - Whether the battery is charging (on AC power) or discharging (on battery power)
• Power Source - Whether the device is receiving power from the battery or from an external source
• Temperature - Current battery temperature
• Health Percentage - Indicates the ratio of present capacity to design capacity at a discharge rate of design
capacity.
• Backup Battery Voltage - Backup battery voltage. The MC93XX has a supercapacitor and not a backup
battery, so this statistic will always display as 0 V.
• Manufacture Date - Manufacture date of the battery.

95
 Applications

GPS Test Information

Not supported on this device.

System Test Information

Use the System Test to determine if the CPU or memory loads are too high, there are too many processes
running on the device, or storage on the device is almost full.

The System Test obtains the following information:

• CPU Load - Amount of CPU being used
• Free Physical Memory - Amount of RAM available
• Free Storage - Amount of internal Flash memory available
• Process Count - Number of processes currently running.

WLAN Test Information

If the WiFi radio is not present or disabled, skip this test. This test determines if the device’s WLAN
configuration is correct or whether there is any connection with an access point or network.

The WLAN test obtains the following information:

• WLAN Enabled - WLAN radio is enabled or disabled
• WLAN Status - Current status of association with the access point
• ESSID - Name of the wireless network
• BSSID - MAC address of the connected access point
• MAC Address - Device’s MAC address
• Signal - Strength of the Wi-Fi signal (in dBm)
• IP Address - IP address of the device.

WWAN Test Information

Not supported on this device.

Bluetooth Test Information

The Bluetooth Test obtains the following information:

• Enabled - Whether the Bluetooth radio is enabled or disabled
• Status - Whether the device is paired to another Bluetooth device
• Connectable/Discoverable - Whether the device is discoverable or able to connect
• Address - Bluetooth radio MAC address
• Name - Bluetooth name for the device.

96
 Applications

Device Central
Device Central displays detailed information about the device and connected peripherals and supports the
following Zebra devices:
• RS507/RS507X Hands-free Imager
• RS6000 Bluetooth Ring Scanner
• DS3678 Digital Scanner.

Device Central features include:

• Discovering and pairing with supported peripherals via Bluetooth or corded connection.
• Paging a connected RS6000 Ring Scanner.
• Displaying the connection status of peripherals.
• Displaying information for a connected peripheral in the notification bar.

Figure 72 Device Central Screen

97
 Applications

Paging an RS6000 Ring Scanner

Use Page button to easily locate the currently connected RS6000 Ring Scanner:

1. With the RS6000 Ring Scanner connected, swipe up from the bottom of the Home screen, and touch .

NOTE: The RS6000 Ring Scanner must be within 10 m (32 ft) of the device.

2. Touch RS6000. The Device Details screen displays.

Figure 73 Page RS6000

3. Under the RS6000 peripheral information, touch Page to page the RS6000. The paged RS6000 beeps and
vibrates.

To stop paging, press the scan trigger of the RS6000. On a triggerless RS6000, reset the RS6000 to stop
paging. Refer to the RS6000 User Guide.

98
Data Capture

Introduction
This chapter provides information for capturing barcode data using the internal camera and optional
scan modules and Bluetooth scanner.

The device offers the following data capture options:

• Imager (SE4750-SR 2D, SE4850-ER 2D, SE4770 2D, SE4750DPM, and SE4750DPW).
• Laser Scanner (SE965 1D).
• Bluetooth (RS507/RS507X Hands-free imager, RS6000 Bluetooth Ring Scanner, and DS3678
Digital Barcode Scanner).

NOTE: DataWedge is installed and enabled on the device by default.

By default, the good decode beep is set to system volume (Notifications). The good decode beep can be set to
another sound (Music and Media), and the volume can be independently controlled. See the DataWedge section
in the Integrator Guide for more information.

Integrated Imager
The device with an integrated 2D imager has the following features:
• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear,
postal, PDF417, Digimarc, and 2D matrix code types.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.

The imager uses imaging technology to take a picture of a barcode, and executes state-of-the-art
software decoding algorithms to extract the barcode data from the image.

Operational Modes

The device with an integrated imager supports two modes of operation, listed below. Activate each
mode by pressing the Scan button.
• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view.
The imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.

NOTE: To enable Pick List Mode, configure in DataWedge or set in an application using a API command.

• Pick List mode - Selectively decode a barcode when more than one barcode is in the device’s field
of view by moving the aiming crosshair or dot over the required barcode. Use this feature for pick

99
 Data Capture

lists containing multiple barcodes and manufacturing or transport labels containing more than one barcode
type (either 1D or 2D).

Laser Scanner
The device with a laser scanner has the following features:
• Reading of a variety of barcode symbologies, including the most popular linear, and 1D code types.
• Intuitive laser aiming for easy point-and-shoot operation.

RS507/RS507X Hands-Free Imager

The RS507/RS507X Hands-free Imager is a wearable barcode scan solution for both 1D and 2D barcode
symbologies.

Figure 74 RS507/RS507X Hands-Free Imager

Refer to the RS507/RS507X Hands-free Imager Product Reference Guide for more information.

RS6000 Bluetooth Ring Scanner

The RS6000 Bluetooth Ring Scanner is a wearable barcode scan solution for both 1D and 2D barcode
symbologies.

Figure 75 RS6000 Bluetooth Ring Scanner

Refer to the RS6000 Bluetooth Ring Scanner Product Reference Guide for more information.

DS3678 Digital Scanner

The cordless DS3678 combines superior 1D and 2D omnidirectional barcode scanning performance and
advanced ergonomics in a lightweight design. See the DS36X8 Product Reference Guide for more information.

100
 Data Capture

Figure 76 DS3678 Digital Scanner

Scanning Considerations
Typically, scanning is a simple matter of aim, scan, and decode, with a few quick trial efforts to master it.
However, consider the following to optimize scanning performance:
• Range: Scanners decode best over a particular working range — minimum and maximum distances from
the barcode. This range varies according to barcode density and scanning device optics. Scan within range
for quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner
closer and further away to find the right working range for the barcodes being scanned.
• Angle: Scanning angle is important for quick decodes. When the illumination/flash reflects directly back into
the imager, the specular reflection can blind/saturate the imager. To avoid this, scan the barcode so that the
beam does not bounce directly back. Do not scan at too sharp an angle; the scanner needs to collect
scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to
work within.
• Hold the device farther away for larger symbols.
• Move the device closer for symbols with bars that are close together.

NOTE: Scanning procedures depend on the app and device configuration. An app may use different scanning
procedures from the one listed above.

Barcode Capture with Imager

To capture barcode data:
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the top of the device at a barcode.

101
 Data Capture

Figure 77 Barcode Scanning – MC93XX

3. Press and hold the Scan button or Trigger.

The red laser aiming pattern turns on to assist in aiming.
4. Ensure the barcode is within the area formed by the cross-hairs in the aiming pattern. The aiming dot is
used for increased visibility in bright lighting conditions.
The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded
successfully. Note that when the device is in Pick List Mode, the device does not decode the barcode until
the center of the crosshair touches the barcode.

Figure 78 Aiming Pattern: Standard and Extended Range

Figure 79 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range

5. Release the scan button or Trigger.

6. The barcode content data appears in the text field.

Barcode Capture with Laser Scanner

To capture barcode data:
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).

102
 Data Capture

2. Point the top of the device at a barcode.

3. Point the scan exit window at a barcode.

Figure 80 Barcode Scanning – MC93XX

4. Press and hold the Scan button.

The red scan line turns on to assist in aiming. Ensure that the scan line crosses every bar and space of the
barcode.
The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded
successfully.

Figure 81 Linear Scanner Aiming Pattern

5. Release the scan button.

6. The captured data appears in the text field.

Scanning with RS507/RS507X Hands-Free Imager

To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows you to
enable the scanner to decode barcode data and display the barcode content.

To scan with the RS507/RS507X:

1. Pair the RS507/RS507X with the device. See Pairing Bluetooth Scanners or Pairing Using Bluetooth
Human Interface Device for more information.

2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the RS507/RS507X at a barcode.

103
 Data Capture

Figure 82 Barcode Scanning with RS507/RS507X

4. Press and hold the trigger.

The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed by
the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

The RS507/RS507X LEDs light green and a beep sounds to indicate the barcode was decoded
successfully. When the RS507/RS507X is in Pick List mode, the RS507/RS507X does not decode the
barcode until the center of the crosshair touches the barcode.

Figure 83 RS507/RS507X Aiming Pattern

Figure 84 RS507/RS507X Pick List Mode with Multiple Barcodes in Aiming Pattern

5. The captured data appears in the text field.

104
 Data Capture

Scanning with RS6000 Bluetooth Ring Scanner

To read a barcode, a scan-enabled app is required. Devices that contain the Zebra DataWedge app allows you
to enable the scanner to decode barcode data and display the barcode content.

To scan with the RS6000:

1. Pair the RS6000 with the device. See Pairing Using Bluetooth Human Interface Device for more
information.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the RS6000 at a barcode.

Figure 85 Barcode Scanning with RS6000

4. Press and hold the trigger.

The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed by
the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

The RS6000 LEDs light green and a beep sounds to indicate the barcode was decoded successfully. When
the RS6000 is in Pick List mode, the RS6000 does not decode the barcode until the center of the crosshair
touches the barcode.

Figure 86 RS6000 Aiming Pattern

105
 Data Capture

Figure 87 RS6000 Pick List Mode with Multiple Barcodes in Aiming Pattern

5. The captured data appears in the text field.

Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner

To scan with the DS3608 or DS3678:
1. Pair the scanner with the device. For more information, see Connecting a USB Scanner for the DS3608 or
Pairing Bluetooth Scanners for the DS3678.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the scanner at a barcode.

Figure 88 Barcode Scanning (DS3678 shown)

4. Press and hold the trigger.

Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility in
bright lighting conditions.

Figure 89 DS3608/DS3678 Aiming Pattern

106
 Data Capture

Figure 90 DS3608/DS3678 Pick List Mode with Multiple Barcodes in Aiming Pattern

5. The captured data appears in the text field.

Pairing the RS507/RS507X/RS6000 Hands-Free Imager

To connect the RS507/RS507X or RS6000 imager to the device, use one of the following methods:
• Near Field Communication (NFC) (RS6000 only)
• Simple Serial Interface (SSI)
• Bluetooth Human Interface Device (HID) Mode.

Pairing Using Near Field Communication

NOTE: NFC is supported on the premium configurations of the device.

The MC93XX provides the ability to pair the RS6000 using NFC.
1. Ensure that NFC is enabled on the MC93XX.
2. Align the NFC icon on the RS6000 with the NFC icon on the back of the MC93XX.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
MC93XX. When connection is established, the Status LED turns off and the RS6000 emits a single string of
low/high beeps.
A notification appears on the MC93XX screen.

The icon appears in the Status bar.

107
 Data Capture

Figure 91 Align NFC Antennas

The MC93XX pairs with the RS6000 and appears in the Status bar.

NOTE: Not all Zebra devices support NFC readers and the Tap-to-Pair feature.

Pairing in HID Mode Using Near Field Communication

The MC93XX provides the ability to pair the RS6000 in HID Mode using NFC.

NOTE: NFC is supported on the premium and premium + configurations of the device and only with the
RS6000.

1. Ensure that NFC is enabled on the MC93XX.

2. Ensure that Bluetooth is enabled on both devices.
3. Ensure that the Bluetooth device to discover is in discoverable mode.
4. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
5. Place the RS6000 in Human Interface Device (HID) mode. If the RS6000 is already in HID mode, skip to
step 6.
a. Remove the battery from the RS6000.
b. Press and hold the Restore key.
c. Install the battery onto the RS6000.
d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash
green.
e. Scan the barcode below to place the RS6000 in HID mode.

108
 Data Capture

Figure 92 Bluetooth HID Barcode

6. Remove the battery from the RS6000.

7. Re-install the battery into the RS6000.
8. Align the NFC icon on the RS6000 with the NFC icon on the MC93XX.
The Status LED blinks blue indicating that the RS6000 is attempting to establish connection with the
MC93XX. When connection is established, the Status LED turns off and the RS6000 emits a single string of
low/high beeps.
A notification appears on the MC93XX screen.

The icon appears in the Status bar.

Figure 93 Align NFC Antennas

The MC93XX pairs with the RS6000 and appears in the Status bar.

NOTE: Not all Zebra devices support NFC readers and the Tap-to-Pair feature.

Pairing Using Simple Serial Interface (SSI)

To pair the RS507/RS507X or RS6000 with the device using SSI.

1. Swipe up from the bottom of the Home screen and touch .

109
 Data Capture

Figure 94 Bluetooth Pairing Utility

2. Using the RS507/RS507X or RS6000, scan the barcode on the screen.

The RS507/RS507X or RS6000 emits a string of high/low/high/low beeps. The Scan LED flashes green
indicating that the RS507/RS507X or RS6000 is attempting to establish connection with the device. When
connection is established, the Scan LED turns off and the RS507/RS507X or RS6000 emits one string of
low/high beeps.

A notification appears on the Notification panel and the icon appears in the Status bar.

Pairing Using Bluetooth Human Interface Device

To pair the RS507/RS507X or RS6000 with the device using Human Interface Device (HID):
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Place the RS507/RS507X or RS6000 in HID mode. If the RS507/RS507X or RS6000 is already in HID
mode, skip to step 5.
a. Remove the battery from the RS507/RS507X or RS6000.
b. Press and hold the Restore key.
c. Install the battery onto the RS507/RS507X or RS6000.
d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash
green.
e. Scan the barcode below to place the RS507/RS507X or RS6000 in HID mode.

110
 Data Capture

Figure 95 RS507 Bluetooth HID Barcode

Figure 96 RS6000 Bluetooth HID Barcode

5. Remove the battery from the RS507/RS507X or RS6000.

6. Re-install the battery into the RS507/RS507X or RS6000.

7. Swipe down from the Status bar to open the Quick Access panel and then touch .

8. Touch Bluetooth.
9. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area and
displays them under Available devices.
10.Scroll through the list and select RS507/RS507X or RS6000.

The device connects to the RS507/RS507X or RS6000 and Connected appears below the device name.
The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is established.

A notification appears on Notification panel and the icon appears in the Status bar.

Pairing a Bluetooth Scanner

Connect the scanner to the device using one of the following methods:
• Simple Serial Interface (SSI) mode
• Bluetooth Human Interface Device (HID) mode.

Pairing Using Bluetooth Human Interface Device

To pair the scanner with the device using HID:

1. Remove the battery from the scanner.
2. Replace the battery.
3. After the scanner reboots, scan the barcode below to place the scanner in HID mode.

Figure 97 Bluetooth HID Classic Barcode

4. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .

111
 Data Capture

5. Touch Bluetooth.
6. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area and
displays them under Available devices.
7. Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial
number.

The device connects to the scanner, the scanner beeps once and Connected appears below the device
name. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is
established.

DataWedge

DataWedge is a utility that adds advanced barcode scanning capability to any application without writing code.
It runs in the background and handles the interface to built-in barcode scanners. The captured barcode data is
converted to keystrokes and sent to the target application as if it was copied and pasted, or typed on the
keypad.

To configure DataWedge refer to the device Integrator Guide or Product Reference Guide.

112
 Data Capture

Enabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .

2. Touch > Settings.

3. Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that
DataWedge is enabled.

4. Touch .

Disabling DataWedge

1. Swipe up from the bottom of the Home screen and touch .

2. Touch > Settings.

3. Touch the DataWedge enabled checkbox. A blue checkmark disappears from the checkbox indicating that
DataWedge is disabled.

4. Touch .

113
Wireless

Introduction
This section provides information on the wireless features:
• Wireless Local Area Network (WLAN)
• Bluetooth

Wireless Local Area Networks

Wireless local area networks (WLANs) allow the device to communicate wirelessly inside a building.
Before using the device on a WLAN, the facility must be set up with the required hardware to run the
WLAN (sometimes known as infrastructure). The infrastructure and the device must both be properly
configured to enable this communication.

Refer to the documentation provided with the infrastructure (access points (APs), access ports,
switches, Radius servers, etc.) for instructions on how to set up the infrastructure.

Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless &
networks settings configure the device to match the security scheme.

The device supports the following WLAN security options:

• Open
• Wireless Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)
• Extensible Authentication Protocol (EAP).

The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.

NOTE: To extend the life of the battery, turn off Wi-Fi when not in use.

Connecting to a Wi-Fi Network

To connect to a Wi-Fi network:
1. Swipe down from the Status bar to open the Quick Access panel.

114
 Wireless

Figure 98 Quick Access Panel

2. Touch Wi-Fi to open the Wi-Fi screen. The device searches for WLANs in the area and lists them.

Figure 99 Wi-Fi Screen

-

3. Scroll through the list and select the desired WLAN network.
4. For open networks, touch profile once or press and hold and then select Connect to network or for secure
networks enter the required password or other credentials then touch Connect. See the system
administrator for more information.
The device obtains a network address and other required information from the network using the dynamic
host configuration protocol (DHCP) protocol. To configure the device with a fixed internet protocol (IP)
address, Refer to the device Integrator Guide for more information.
5. In the Wi-Fi setting field, Connected appears indicating that the device is connected to the WLAN.

115
 Wireless

Removing a Wi-Fi Network

To remove a remembered or connected network:

1. Swipe down from the status bar to open the quick access panel and then touch .

2. Touch Network & Internet > W-Fi.

3. Scroll down to the bottom of the list and touch Saved networks.
4. Touch the name of the network.
5. In the dialog box, touch FORGET.

6. Touch .

Bluetooth

Bluetooth devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio
frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band
(802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 m (32.8 ft))
communication and low power consumption.

Devices with Bluetooth capabilities can exchange information (for example, files, appointments, and tasks)
with other Bluetooth enabled devices such as printers, access points, and other mobile devices.

The device supports Bluetooth Low Energy. Bluetooth Low Energy is targeted at applications in the healthcare,
fitness, security, and home entertainment industries. It provides reduced power consumption and cost while
maintaining standard Bluetooth range.

Adaptive Frequency Hopping

Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with
Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work.
There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and
discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:
• Channel Classification - A method of detecting an interference on a channel-by-channel basis, or
pre-defined channel mask.
• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network.
• Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping channels.
• Channel Maintenance - A method for periodically re-evaluating the channels.

When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate channels.
AFH coexistence allows enterprise devices to operate in any infrastructure.

The Bluetooth radio in this device operates as a Class 2 device power class. The maximum output power is 2.5
mW and the expected range is 10 m (32.8 ft). A definition of ranges based on power class is difficult to obtain
due to power and device differences, and whether in open space or closed office space.

NOTE: It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required.

116
 Wireless

Security
The current Bluetooth specification defines security at the link level. Application-level security is not specified.
This allows application developers to define security mechanisms tailored to their specific need. Link-level
security occurs between devices, not users, while application-level security can be implemented on a per-user
basis. The Bluetooth specification defines security algorithms and procedures required to authenticate
devices, and if needed, encrypt the data flowing on the link between the devices. Device authentication is a
mandatory feature of Bluetooth while link encryption is optional.

Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate the devices
and create a link key for them. Entering a common personal identification number (PIN) in the devices being
paired generates the initialization key. The PIN is never sent over the air. By default, the Bluetooth stack
responds with no key when a key is requested (it is up to user to respond to the key request event).
Authentication of Bluetooth devices is based-upon a challenge-response transaction. Bluetooth allows for a
PIN or passkey used to create other 128-bit keys used for security and encryption. The encryption key is
derived from the link key used to authenticate the pairing devices. Also worthy of note is the limited range and
fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping difficult.

Recommendations are:
• Perform pairing in a secure environment
• Keep PIN codes private and do not store the PIN codes in the device
• Implement application-level security.

Bluetooth Profiles

The device supports the Bluetooth services listed in the table below:

Table 12 Bluetooth Profiles

Profile Description
Service Discovery Protocol Handles the search for known and specific services as well as general
(SDP) services.
Serial Port Profile (SPP) Allows use of RFCOMM protocol to emulate serial cable connection
between two Bluetooth peer devices. For example, connecting the
device to a printer.
Object Push Profile (OPP) Allows the device to push and pull objects to and from a push server.
Advanced Audio Distribution Allows the device to stream stereo-quality audio to a wireless headset or
Profile (A2DP) wireless stereo speakers.
Audio/Video Remote Control Allows the device to control A/V equipment to which a user has access.
Profile (AVRCP) It may be used in concert with A2DP.
Personal Area Network (PAN) Allows the use of Bluetooth Network Encapsulation Protocol to provide
L3 networking capabilities over a Bluetooth link. Only PANU role is
supported.
Human Interface Device Profile Allows Bluetooth keyboards, pointing devices, gaming devices and
(HID) remote monitoring devices to connect to the device.
Headset Profile (HSP) Allows a hands-free device, such as a Bluetooth headset, to place and
receive calls on the device.
Hands-Free Profile (HFP) Allows car hands-free kits to communicate with the device in the car.

117
 Wireless

Table 12 Bluetooth Profiles (Continued)

Profile Description
Phone Book Access Profile Allows exchange of Phone Book Objects between a car kit and a mobile
(PBAP) device to allow the car kit to display the name of the incoming caller;
allow the car kit to download the phone book so you can initiate a call
from the car display.
Out of Band (OOB) Allows exchange of information used in the pairing process. Pairing is
completed using the Bluetooth radio, but requires information from the
OOB mechanism. Using OOB with NFC enables pairing when devices
simply get close, rather than requiring a lengthy discovery process.
Symbol Serial Interface (SSI) Allows for communication with Bluetooth Imager.
Generic Attribute Profile (GATT) Provides profile discovery and description services for Bluetooth Low
Energy protocol. It defines how attributes are grouped together into sets
to form services.
Dial Up Networking (DUN) Provides a standard to access the Internet and other dial-up services
over Bluetooth.
Generic Access Profile (GAP) Use for device discovery and authentication.
OBject EXchange (OBEX) Facilitates the exchange of binary objects between devices.

Bluetooth Power States

The Bluetooth radio is off by default:

• Suspend - When the device goes into suspend mode, the Bluetooth radio stays on.
• Airplane Mode - When the device is placed in Airplane Mode, the Bluetooth radio turns off. When Airplane
mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the Bluetooth radio
can be turned back on if desired.

Bluetooth Radio Power

Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (for example, an
airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the
Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only with
Bluetooth radios in close proximity.

NOTE: To achieve the best battery life, turn off radios when not in use.

Enabling Bluetooth
To enable Bluetooth:
1. Swipe down from the Status bar to open the Quick Access panel.

2. Touch to turn Bluetooth on.

3. Touch .

118
 Wireless

Disabling Bluetooth
To disable Bluetooth:
1. Swipe down from the Status bar to open the Quick Access panel.

2. Touch to turn Bluetooth off.

3. Touch .

Discovering Bluetooth Device(s)

The device can receive information from discovered devices without pairing. However, once paired, the device
and a paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth
devices in the area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Swipe down from the Status bar to open the Quick Access panel.
5. Touch Bluetooth.
6. Touch MORE SETTINGS. The Bluetooth screen appears.
7. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area and
displays them under Available devices.
8. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
9. Touch Pair on both devices.
10.The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is established.

Changing the Bluetooth Name

By default, the device has a generic Bluetooth name that is visible to other devices when connected.

1. Swipe down from the Status bar to open the Quick Access panel and then touch .

2. Touch Connected devices > Bluetooth.

3. If Bluetooth is not on, move the switch to turn Bluetooth on.
4. Touch Device name.
5. Enter a name and touch RENAME.

6. Touch .

Connecting to a Bluetooth Device

Once paired, connect to a Bluetooth device.

1. Swipe down from the Status bar to open the Quick Access panel and then touch .

2. Touch Connected device > Bluetooth.

119
 Wireless

3. In the list, touch the unconnected Bluetooth device.

When connected, Connected appears below the device name.

Selecting Profiles on the Bluetooth Device

Some Bluetooth devices have multiple profiles. To select a profile:

1. Swipe down from the Status bar to open the Quick Access panel and then touch .

2. Touch Connected Devices > Bluetooth.

3. In the Paired Devices list, touch next to the device name.

4. Turn on or off a profile to allow the device to use that profile.

5. Touch .

Unpairing a Bluetooth Device

To unpair a Bluetooth device and erase all pairing information:

1. Swipe down from the Status bar to open the Quick Access panel and then touch .

2. Touch Connected devices > Bluetooth.

3. In the Paired Devices list, touch next to the device name.

4. Touch FORGET.

5. Touch .

Using a Bluetooth Headset

Use a Bluetooth headset for audio communication when using an audio-enabled app. Using the NFC (Tap to
pair) option, you can easily connect to Bluetooth with a Zebra Headset (HS3100). See Bluetooth for more
information on connecting a Bluetooth headset to the device. Set the volume appropriately before putting on
the headset. When a Bluetooth headset is connected, the speakerphone is muted.

Near Field Communications

NFC/HF RFID is a short-range wireless connectivity technology standard that enables secure transaction
between a reader and a contactless smartcard. The technology is based on ISO/IEC 14443 type A and B
(proximity), ISO/IEC 15693 (vicinity), and FeliCa standards, using the HF 13.56 MHz unlicensed band. The
device supports the following operating modes:
• Reader mode
• Peer-to-Peer communication
• Card Emulation mode.

Using NFC, the device can:

• Read contactless cards such as contactless tickets, ID cards and ePassport.
• Read and write information to contactless cards such as SmartPosters and tickets, as well as devices with
NFC interface such as vending machines.

120
 Wireless

• Read information from supported medical sensors.

• Pair with supported Bluetooth devices such as printers (ex. ZQ5x, ZD5x), ring scanners (ex. RS6000), and
headsets (ex. HS3100).
• Exchange data with another NFC device.
• Emulate contactless card such as ticket or SmartPoster.

The device NFC antenna is positioned to read NFC cards from the top of the device while the device is being
held.

Reading NFC Cards

To read NFC cards:

1. Launch an NFC enabled application.
2. Hold device as shown.
3. Move the device close to the NFC card until it detects the card.
4. Hold the card steadily until the transaction is complete (usually indicated by the application).

Figure 100 Reading Cards

121
 Wireless

Sharing Information Using NFC

You can beam content like a web page, contact cards, pictures, YouTube links or location information from
your screen to another device by bringing the devices together back to back.

Make sure both devices are unlocked, support NFC, and have both NFC and Android Beam turned on.
1. Open a screen that contains a web page, video, photo or contact.
2. Move the front of the device toward the front of the other device.

Figure 101 Sharing Data Using NFC

When the devices connect, a sound emits, the image on the screen reduces in size, the message Touch to
beam displays.
3. Touch anywhere on the screen.
The transfer begins.

Cast

Use Cast to mirror the device screen on a Miracast enabled wireless display.

1. Swipe down from the Status bar to open the Quick Settings bar and then touch .

2. Touch Connected Devices.

3. Touch Cast.

4. Touch > Enable wireless display. The device searches for nearby Miracast devices and lists them.

5. Touch a device to begin casting.

6. Touch .

122
Accessories

Introduction
This chapter provides information for using the accessories for the device.

MC93XX Accessories
The table below lists the accessories available for the device.

Table 13 MC93XX Accessories

Accessory Part Number Description

Cradles
1-Slot USB Charge Cradle with Spare CRD-MC93-2SUCHG-01 Charges the MC93XX main battery and a spare
Battery Charger battery, and synchronizes the MC93XX with a
host computer through a USB connection.
Requires power supply
(PWR-BGA12V50W0WW), DC line cord
(CBL-DC-388A1-01) and a country specific
grounded AC line cord.
4-Slot Charge Only ShareCradle CRD-MC93-4SCHG-01 Charges up to four MC93XXs. Requires power
supply (PWR-BGA12V108W0WW), DC line cord
(CBL-DC-381A1-01) and a country specific
grounded AC line cord.
4-Slot Ethernet ShareCradle CRD-MC93-4SETH-01 Charges up to four MC93XXs through the main
battery and synchronizes the devices with a host
computer through an Ethernet connection.
Requires power supply
(PWR-BGA12V108W0WW), DC line cord
(CBL-DC-381A1-01) and a country specific
grounded AC line cord.
Chargers
4-Slot Spare Battery Charger SAC-MC93-4SCHG-01 Charges up to four MC93XX spare batteries.
Requires power supply
(PWR-BGA12V50W0WW), DC line cord
(CBL-DC-388A1-01) and a country specific
grounded AC line cord.

123
 Accessories

Table 13 MC93XX Accessories (Continued)

Accessory Part Number Description

16-Slot Spare Battery Charger SAC-MC93-16SCHG-01 Charges up to 16 MC93XX spare batteries.
Requires power supply
(PWR-BGA12V108W0WW), DC line cord
(CBL-DC-381A1-01) and a country specific
grounded AC line cord.
Power Supply PWR-BGA12V50W0WW Provides 12 VDC, 4.16A power to the 1-Slot
USB Charge Cradle and the 4-Slot Spare Battery
Charger. Requires a DC line cord
(CBL-DC-388A1-01) and a country specific
grounded AC line cord.
Power Supply PWR-BGA12V108W0WW Provides 12 VDC, 9A power to the 4-Slot Charge
Cradle with 4-Slot Battery Charger, and 16-Slot
Battery Charger. Requires a DC line cord
(CBL-DC-381A1-01) and a country specific
grounded AC line cord.
Power Supply PWR-WUA5V12W0US Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in the
United States.
Power Supply PWR-WUA5V12W0GB Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in the
European Union.
Power Supply PWR-WUA5V12W0EU Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in the
United Kingdom.
Power Supply PWR-WUA5V12W0AU Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in Australia.
Power Supply PWR-WUA5V12W0CN Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in China.
Power Supply PWR-WUA5V12W0IN Provides 5 VDC, 2.5A power to the USB Charge
Cable. Includes plug adapter for use in India.
US AC Line Cord 23844-00-00R Provides power to 3–wire power supplies
PWR-BGA12V50W0WW and
PWR-BGA12V108W0WW.
DC Line Cord CBL-DC-381A1-01 Provides power from the power supply
(PWR-BGA12V108W0WW) to the 4-Slot
Charge Only Cradle, 4-Slot Ethernet Cradle,
and 16-Slot Battery Charger.
DC Line Cord CBL-DC-388A1-01 Provides power from the power supply
(PWR-BGA12V150W0WW) to the 1-Slot USB
Charge Cradle and 4-Slot Battery Charger.

124
 Accessories

Table 13 MC93XX Accessories (Continued)

Accessory Part Number Description

Cables
USB Charge/Com Snap-On Cup CBL-MC93-USBCHG-01 Provides power and/or communication over USB
to the device. Requires wall adapter/power
NOTE: A separate USB cable and power supply PWR-WUA5V12W0xx.
supply is required to support fast charging.
USB (Type-C) Cable is required to allow
communication from the snap-on to the
PC/laptop.
1-Slot Cradle USB Cable CBL-TC2X-USBC-01 Provides USB communication through the 1-Slot
USB cradle to the host computer.
Miscellaneous
Cradle Adapter ADP-MC93-CRDCUP-01 MC93XX Charge Only Adapter for backwards
compatibility with MC9XX cradles. Works with
MC9XX 1-Slot USB Cradle, and 4-Slot Charge
Only Cradle.
7000mAh PowerPrecision+ standard BTRY-MC93-STN-01 Replacement standard battery.
battery
BTRY-MC93-STN-10 Replacement standard battery (10–pack).

BTRY-MC93-STN-IN Replacement standard battery (India).

5000mAh PowerPrecision+ freezer BTRY-MC93-FRZ-01 Replacement freezer battery.
battery
BTRY-MC93-FRZ-10 Replacement freezer battery (10–pack).
7000mAh PowerPrecision+ BTRY-MC93-NI-01 Replacement non-incendive battery.
non-incendive battery
BTRY-MC93-NI-10 Replacement non-incendive battery (10–pack).
MC93XX Hand Strap SG-MC93-HDSTPG-01 Replacement hand strap for the MC93XX Hand
strap loop holds an optional stylus
(SG-TC7X-STYLUS-03).
MC93 Soft Holster for Gun SG-MC9X-SHLSTG-01 Provides a soft, clip on holster and a shoulder
strap for the MC93XX.
MC93 Rubber Boot for Gun SG-MC93-RBTG-01 Provides additional protection for wear and tear
of the MC93XX.
Screen Protector MISC-MC93-SCRN-01 Provides additional protection for display
(5-pack).
Stylus and Tether SG-TC7X-STYLUS-03 Conductive carbon-filled stylus for capacitive
touch panel; includes coiled tether (3-pack).
Un-powered Forklift Mount MNT-MC93-FLCH-01 Un-powered forklift mount. Allows installing the
device on a roll bar or square surface of a forklift.
Includes:
Forklift holder (MNT-MC93-FLCH-01), RAM
double socket arm for 1” ball
(MNT-RAM-B201U), and RAM forklift clamp 2.5”
max width square rail base with 1” ball
(MNT-RAM-B247U25).

125
 Accessories

Table 13 MC93XX Accessories (Continued)

Accessory Part Number Description

34-key Numeric Keypad KYPD-MC9334FNR-01 34-key Numeric Keypad
43-key Shifted Alpha Keypad KYPD-MC9343FN-01 43-key Shifted Alpha Keypad
53-key 3270 Emulator Keypad KYPD-MC93533270-01 53-key 3270 Emulator Keypad
53-key Keypad (Alpha-Numeric) KYPD-MC93535250-01 53-key Keypad (Alpha-Numeric)
53-key 5250 Emulator Keypad KYPD-MC9353ANR-01 53-key 5250 Emulator Keypad
53-key VT Emulator Keypad KYPD-MC9353VT-01 53-key VT Emulator Keypad
58-Keys OmniiXT15f Keypad KYPD-MC9358ANR-01 58-Keys OmniiXT15f Keypad
29-Keys Shifted Alpha Keypad KYPD-MC9329NMR-01 29-Keys Shifted Alpha Keypad
34-key Numeric Keypad (10 Pack) KYPD-MC9334FNR-10 34-key Numeric Keypad (10 Pack)

NOTE: The 10 pack order includes a keypad

installation tool.
43-key Shifted Alpha Keypad KYPD-MC9343FN-10 43-key Shifted Alpha Keypad (10 Pack)
(10 Pack)
NOTE: The 10 pack order includes a keypad
installation tool.
53-key 5250 Emulator Keypad KYPD-MC93535250-10 53-key 5250 Emulator Keypad (10 Pack)
(10 Pack)
NOTE: The 10 pack order includes a keypad
installation tool.
53-key VT Emulator Keypad KYPD-MC9353VT-10 53-key VT Emulator Keypad (10 Pack)
(10 Pack)
NOTE: The 10 pack order includes a keypad
installation tool.
53-key Keypad (Alpha-Numeric) KYPD-MC9353ANR-10 53-key Keypad (Alpha-Numeric) (10 Pack)
(10 Pack)
NOTE: The 10 pack order includes a keypad
installation tool.
58-Keys OmniiXT15f Keypad KYPD-MC9358ANR-10 58-Keys OmniiXT15f Keypad (10 Pack)

NOTE: The 10 pack order includes a keypad installa-

tion tool.
29-Keys Shifted Alpha Keypad KYPD-MC9329NMR-10 29-Keys Shifted Alpha Keypad (10 Pack)

NOTE: The 10 pack order includes a keypad installa-

tion tool.

126
 Accessories

1-Slot USB Charge Cradle with Spare Battery Charger

The 1-Slot USB Charge Cradle with spare battery:
• Provides 9 VDC power to operate the mobile computer and charge the battery.
• Provides 4.2 VDC power to charge the spare battery.
• Provides a USB port for data communication between the mobile computer and a host computer or other
USB devices, for example, a printer.
• Synchronizes information between the mobile computer and a host computer. With customized or third
party software, it can also synchronize the mobile computer with corporate databases.
• Compatible with the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 102 1-Slot USB Charge Cradle with Spare Battery Charger

Indicator LED Bar

Spare Battery

Spare Battery Charging Well

Spare Battery Charging LED

127
 Accessories

Charging the Battery

NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in a
charging cradle.

1. Ensure that the cradle is connected to power.

2. Slide the device into the slot in the cradle. The devices Charge LED Indicator, indicates the battery charging
status. For charging status, see LED Charging Indicators.

Figure 103 Device Battery Charging

3. Gently press down on the device to ensure proper contact.

4. When charging is complete, remove the device from the cradle slot.

Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures, for example at approximately +37°C
(+98°F), the device or cradle may for small periods of time alternately enable and disable battery charging to
keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.

128
 Accessories

4-Slot Charge Only ShareCradle

The 4-Slot Charge Only ShareCradle:
• Provides 9 VDC power to operating the mobile computer and charge the battery.
• Simultaneously charges up to four mobile computers.
• Compatible with devices using the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 104 4-Slot Charge Only ShareCradle

Power LED

Charging the Battery

NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in a
charging cradle.

1. Ensure that the cradle is connected to power.

2. Slide the mobile computer into the slot in the cradle. The mobile computer Charge LED Indicator, indicates
the mobile computer battery charging status.

129
 Accessories

3. Gently press down on the device to ensure proper contact.

4. When charging is complete, remove the mobile computer from the cradle slot.

Battery Charging in the 4-Slot Charge Only ShareCradle

The MC93XX’s Charge LED indicates the status of the battery charging in the MC93XX. See LED Charge
Indicators for charging status indications.

The 7000mAh PowerPrecision+ standard battery charges from 0% to 90% in less than 3.5 hours at room
temperature using a Zebra accessory.

The 5000mAh PowerPrecision+ freezer battery charges from 0% to 90% in less than 2.5 hours at room
temperature using a Zebra accessory.

The 7000mAh PowerPrecision+ non-incendive battery charges from 0% to 90% in less than 3.5 hours at room
temperature using a Zebra accessory.

Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures, for example at approximately +37°C
(+98°F), the device or cradle may for small periods of time alternately enable and disable battery charging to
keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.

130
 Accessories

4-Slot Ethernet ShareCradle

The 4-Slot Ethernet ShareCradle:
• Provides 9 VDC power to operating the mobile computer and charge the battery.
• Simultaneously charges up to four mobile computers.
• Compatible with devices using the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 105 4-Slot Ethernet ShareCradle

Power LED

Battery Charging in the 4-Slot Ethernet ShareCradle

The MC93XX’s Charge LED indicates the status of the battery charging in the MC93XX. See LED Charge
Indicators for charging status indications.

The 7000mAh PowerPrecision+ standard battery charges from 0% to 90% in less than 3.5 hours at room
temperature using a Zebra accessory.

The 5000mAh PowerPrecision+ freezer battery charges from 0% to 90% in less than 2.5 hours at room
temperature using a Zebra accessory.

131
 Accessories

The 7000mAh PowerPrecision+ non-incendive battery charges from 0% to 90% in less than 3.5 hours at room
temperature using a Zebra accessory.

Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures, for example at approximately +37°C
(+98°F), the device or cradle may for small periods of time alternately enable and disable battery charging to
keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.

132
 Accessories

4-Slot Spare Battery Charger

CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines.

The 4-Slot Spare Battery Charger:

• Charges up to four spare batteries.
• Provides 4.2 VDC power to charge the spare battery.
• Compatible with the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 106 4-Slot Spare Battery Charger

Spare Battery Charging LED

Power LED

133
 Accessories

16-Slot Spare Battery Charger

CAUTION: Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines.

The 16-Slot Spare Battery Charger:

• Charges up to 16 spare batteries.
• Provides 4.2 VDC power to charge the spare battery.
• Compatible with the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 107 16-Slot Spare Battery Charger

Power LED

Spare Battery Charging LED

134
 Accessories

USB Charge/Com Snap-on Cup

The USB Charge/Com Snap-on Cup:
• Provides 5 VDC power to operate the device and to charge the battery.
• Provides power and/or communication with the host computer over USB to the device.
• Compatible with devices using the following batteries:
• 7000mAh PowerPrecision+ standard battery
• 5000mAh PowerPrecision+ freezer battery
• 7000mAh PowerPrecision+ non-incendive battery.

Figure 108 USB Charge/Com Snap-on Cup

USB Charge/Com Snap-on Cup

Pigtail with USB Socket

135
 Accessories

Connecting the USB Charge Cable to Device

NOTE: To function properly, remove the lower part of the rubber boot or the entire rubber boot before placing in a
charging cradle.

To connect the USB Charge Cable to the device, insert the USB Charge Cable straight onto the device until
the device touches the bottom of the cable cup.

Figure 109 Connecting the USB Charge Cable

Connecting the USB Charge/Com Snap-on Cup Cable to Host Computer

To connect the USB Charge/Com Snap-on Cup cable to a host computer:

1. Connect the USB Charge/Com Snap-on Cup to the device.
2. Connect the USB connector to a host computer.

136
 Accessories

Figure 110 Connecting USB Charge/Com Snap-on Cup to Host Computer

USB Cable

137
 Accessories

Charging the Device

To charge the device using the USB Charge/Com Snap-on Cup:
1. Connect the USB Charge/Com Snap-on Cup to the device.
2. Connect the USB connector of the power supply.
3. Plug the power supply into a power outlet.

Figure 111 Charging the Device

Power Supply

USB Cable

Disconnecting the USB Charge/Com Snap-on Cup

To disconnect the USB Charge/Com Snap-on Cup from the device:

1. Depress the two latches on either side of the cup.
2. Pull the cup off the bottom of the device.

138
 Accessories

Figure 112 Disconnecting the USB Charge/Com Snap-on Cup

139
 Accessories

MC93XX Charge Only Adapter

Use the Charge Only Adapter for backwards compatibility with the MC9XXX cradles and the MC93XX mobile
computer.
• Charge Only Adapter supports terminal charging only for the MC9XXX 1-Slot Cradle and 4-Slot Cradle.
• Charge Only Adapter provides charge only and no communication when used with the MC9XXX cradles.

Figure 113 MC9X 1-Slot Cradle Charge Only Adapter

Charge Only Adapter

MC92 1-Slot Cradle

Figure 114 MC9X 4-Slot Cradle Charge Only Adapter

Charge Only Adapter

MC92 4-Slot Cradle

140
 Accessories

Charge Only Adapter Installation

To install the Charge Only Adapter:

1. Clean the MC9XXX cradle and contacts surface as specified with an alcohol wipe, using a back and forth
motion with your finger.
For more information about cleaning, refer to the MC93XX Mobile Computer User Guide.

Figure 115 Clean MC9XXX Cradle Contacts and Surfaces

Clean Cradle Contacts and Surface

2. Peel and remove the adhesive from the back of the adapter.

Figure 116 Peel and Remove Adhesive

Peel and Remove Adhesive Liner

3. Insert the adapter into the MC9XXX cradle and adhere to the bottom of the cradle.

141
 Accessories

Figure 117 Insert Adapter into Cradle

4. Insert the device into the cradle.

Figure 118 Insert Device into Cradle

142
 Accessories

Rubber Boot
To attach the rubber boot:
1. If using the rubber boot with a device with the SE965 laser scanner, retain the shim (default assembly). If
using the rubber boot with a device with either the SE4750SR or the SE4850ER imager, you must snap-off
the shim by pushing it through.

Figure 119 Remove the Shim

Shim

2. Slide the top of the device into the top of the rubber boot.

Figure 120 Slide the Rubber Boot

3. Grasp the bottom of the rubber boot and place over the bottom of the device.

Figure 121 Attach the Top of the Rubber Boot

4. Turn the device over and ensure that the two alignment tabs completely fit into the two alignment slots on
the device.

143
 Accessories

Figure 122 Align tabs

Tabs

NOTE: To charge the device in a cradle, completely remove the rubber boot.

144
 Accessories

Installing the Hand Strap

To install the hand strap:
1. Thread and pull-through the short section through the opening near the base of the trigger handle.

Figure 123 Insert Loop Through Handle Slot

2. Thread and pull-through the longer section through the opening near the battery.

Figure 124 Pull-through Hand Strap Near Battery

3. Attach the two plastic ends together.

Figure 125 Attach Plastic Ends Together

145
 Accessories

Un-powered Forklift Mount

The Un-powered Forklift Mount on a forklift allows you to place the device in a holder. The forklift mount does
not provide charging or communication to the device. Install the Forklift Mount on a square surface or roll bar of
a forklift. The mount supports portrait (vertical) orientation only.

To install the MC93XX in an un-powered forklift mount holder:

1. Secure the RAM Clamp Base to the forklift mounting surface using two screws and nuts.
2. Attach the RAM Socket Arm to the RAM Clamp Base and the Forklift Mount Holder.
3. Turn the Socket Arm hand-screw clockwise until tight.

Figure 126 Insert Device into Forklift Mount Holder

5$06RFNHW$UP 5$0&ODPS%DVH

6WUDS
5$0&ODPS%DVH

)RUNOLIW0RXQWLQJ6XUIDFH

)RUNOLIW0RXQW+ROGHU

4. Insert the device into the Forklift Mount Holder at a 45° angle in one of two ways (shown below).
5. Rotate and snap the device into place.
6. If required, secure the device with the rubber strap, and snap it into place.

146
 Accessories

Figure 127 Insert Device into Forklift Mount Holder, Rotate and Snap (Option 1)

Figure 128 Insert Device into Forklift Mount Holder, Rotate and Snap (Option 2)

NOTE: Use strap in this orientation for added retention of the device.

147
 Maintenance and
Troubleshooting

Introduction
This chapter includes instructions on cleaning and storing the device, and provides troubleshooting solutions for
potential problems during operation.

Maintaining the Device

For trouble-free service, observe the following tips when using the device:
• To avoid scratching the screen, use a Zebra approved capacitive touch panel compatible stylus intended for
use with a touch-sensitive screen. Never use an actual pen or pencil or other sharp object on the surface of the
device screen.
• The touch-sensitive screen of the device is glass. Do not drop the device or subject it to strong impact.
• Protect the device from temperature extremes. Do not leave it on the dashboard of a car on a hot day, and keep
it away from heat sources.
• Do not store the device in any location that is dusty, damp, or wet.
• Use a soft lens cloth to clean the device. If the surface of the device screen becomes soiled, clean it with a soft
cloth moistened with an approved cleanser. For a list of approved cleansers, see Approved Cleanser Active
Ingredients.
• Periodically replace the rechargeable battery to ensure maximum battery life and product performance. Battery
life depends on individual usage patterns.

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non commercial environment.
• Follow battery usage, storage, and charging guidelines found in this guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the ambient battery and charger temperatures must be between +32ºF
and +104ºF (0ºC and +40ºC).
• Do not use incompatible batteries and chargers, including non-Zebra batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you have any
questions about the compatibility of a battery or a charger, contact the Global Customer Support Center.
• For devices that utilize a USB port as a charging source, the device shall only be connected to products that
bear the USB-IF logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred the battery.

148
 • Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to
water or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to properly dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with water for 15 minutes, and seek medical advice.
• If you suspect damage to your equipment or battery, contact Customer Support to arrange for inspection.

Cleaning Instructions
CAUTION: Always wear eye protection.
Read warning label on alcohol product before using.
If you have to use any other solution for medical reasons please contact the Global Customer Support Center for more in-
formation.

WARNING: Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug
the device and clean the product immediately in accordance with these guidelines.

Approved Cleanser Active Ingredients

100% of the active ingredients in any cleaner must consist of one or some combination of the following:
isopropyl alcohol, bleach/sodium hypochlorite1 (see important note below), or mild dish soap.

IMPORTANT: Use pre-moistened wipes and do not allow liquid cleaner to pool.

1When using sodium hypochlorite (bleach) based products, always follow the manufacturer’s recommended instructions:

use gloves during application and remove the residue afterwards with a damp alcohol cloth or a cotton swab to avoid
prolonged skin contact while handling the device.

Due to the powerful oxidizing nature of sodium hypochlorite, the metal surfaces on the device are prone to oxidation
(corrosion) when exposed to this chemical in the liquid form (including wipes). In the event that these type of disinfectants
come in contact with metal on the device, prompt removal with an alcohol-dampened cloth or cotton swab after the cleaning
step is critical.

Harmful Ingredients

The following chemicals are known to damage the plastics on the device and should not come in contact with
the device: acetone; ketones; ethers; aromatic and chlorinated hydrocarbons; aqueous or alcoholic alkaline
solutions; ethanolamine; toluene; trichloroethylene; benzene; carbolic acid and TB-lysoform.

Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are
known to be harmful to the housing of the device.

149
Device Cleaning Instructions

Do not apply liquid directly to the device. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the
device in the cloth or wipe, instead gently wipe the unit. Be careful not to let liquid pool around the display
window or other places. Before use, allow the unit to air dry.

NOTE: For thorough cleaning, it is recommended to first remove all accessory attachments, such as hand straps or cradle
cups, from the mobile device and to clean them separately.

Special Cleaning Notes

The device should not be handled while wearing vinyl gloves containing phthalates, or before hands are
washed to remove contaminant residue after gloves are removed.

If products containing any of the harmful ingredients listed above are used prior to handling the device, such as
hand sanitizer that contain ethanolamine, hands must be completely dry before handling the device to prevent
damage to the device.

IMPORTANT: If the battery connectors are exposed to cleaning agents, thoroughly wipe off as much of the chemical as
possible and clean with an alcohol wipe. It is also recommended to install the battery in the terminal prior to cleaning and
disinfecting the device to help minimize buildup on the connectors.

When using cleaning/disinfectant agents on the device, it is important to follow the directions prescribed by the
cleaning/disinfectant agent manufacturer.

Cleaning Materials Required

• Alcohol wipes
• Lens tissue
• Cotton-tipped applicators
• Isopropyl alcohol
• Can of compressed air with a tube.

Cleaning Frequency

The cleaning frequency is at the customer’s discretion due to the varied environments in which the mobile
devices are used and may be cleaned as frequently as required. When dirt is visible, it is recommended to
clean the mobile device to avoid build up of particles which make the device more difficult to clean later on.

Cleaning the Device

Housing
Thoroughly wipe the housing, including all buttons and triggers, using an approved alcohol wipe.

Display
The display can be wiped down with an approved alcohol wipe, but care should be taken not to allow any
pooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to
prevent streaking.

150
 Exit Window
Wipe the exit window periodically with a lens tissue or other material suitable for cleaning optical material such
as eyeglasses.

Cleaning Battery Connectors

To clean the battery connectors:

1. Remove the main battery from the mobile computer.
2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
3. To remove any grease or dirt, rub the cotton portion of the cotton-tipped applicator back-and-forth across
the connectors on the battery and terminal sides. Do not leave any cotton residue on the connectors.
4. Repeat at least three times.
5. Use a dry cotton-tipped applicator and repeat steps 3 and 4. Do not leave any cotton residue on the
connectors.
6. Inspect the area for any grease or dirt and repeat the cleaning process if necessary.

CAUTION: After cleaning the battery connectors with bleach-based chemicals, follow the Battery Connector Cleaning in-
structions to remove bleach from the connectors.

Cleaning Cradle Connectors

To clean the connectors on a cradle:

1. Remove the DC power cable from the cradle.
2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
3. Rub the cotton portion of the cotton-tipped applicator along the pins of the connector. Slowly move the
applicator back-and-forth from one side of the connector to the other. Do not leave any cotton residue on
the connector.
4. All sides of the connector should also be rubbed with the cotton-tipped applicator.
5. Remove any lint left by the cotton-tipped applicator.
6. If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to
remove.
7. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
before applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and low
humidity requires less drying time.

CAUTION: After cleaning the cradle connectors with bleach-based chemicals, follow the Cleaning Cradle Connectors in-
structions to remove bleach from the connectors.

151
Troubleshooting
MC93XX

The following tables provides typical problems that might arise and the solution for correcting the problem.

Table 14 Troubleshooting the MC93XX

Problem Cause Solution

When pressing the Battery not charged. Charge or replace the battery in the device.
power button the Battery not installed Install the battery properly.
device does not turn properly.
on.
System crash. Perform a reset.
When pressing the Battery charge is at a Charge or replace the battery in the device.
power button the level where data is
device does not turn maintained but battery
on but LED bar should be re-charged.
blinks.
Battery did not Battery failed. Replace battery. If the device still does not operate,
charge. perform a reset.
Device removed from Insert device in cradle. The 7,000 mAh battery fully
cradle while battery was charges in less than five hours at room temperature.
charging.
Extreme battery Battery does not charge if ambient temperature is below
temperature. 0°C (32°F) or above 40°C (104°F).
Cannot see Device not powered on. Press the Power button.
characters on
display.
During data Device removed from Replace the device in the cradle, or reattach the
communication with cradle or disconnected communication cable and re-transmit.
a host computer, no from host computer
data transmitted, or during communication.
transmitted data was Incorrect cable See the system administrator.
incomplete. configuration.
Communication Perform setup.
software was incorrectly
installed or configured.
During data Wi-Fi radio is not on. Turn on the Wi-Fi radio.
communication over You moved out of range Move closer to an access point.
Wi-Fi, no data of an access point.
transmitted, or
transmitted data was
incomplete.

152
Table 14 Troubleshooting the MC93XX

Problem Cause Solution

During data Bluetooth radio is not Turn on the Bluetooth radio.
communication over on.
Bluetooth, no data You moved out of range Move within 10 meters (32.8 feet) of the other device.
transmitted, or of another Bluetooth
transmitted data was device.
incomplete.
No sound. Volume setting is low or Adjust the volume.
turned off.
Device shuts off. Device is inactive. The display turns off after a period of inactivity. Set this
period to 15 seconds, 30 seconds, 1, 2, 5, 10 or 30
minutes.
Battery is depleted. Replace the battery.
Tapping the window The device is not Reset the device.
buttons or icons responding.
does not activate the
corresponding
feature.
A message appears Too many files stored Delete unused memos and records. If necessary, save
stating that the on the device. these records on the host computer (or use an SD card for
device memory is additional memory).
full. Too many applications Remove user-installed applications on the device to
installed on the device. recover memory. Select > Storage > FREE UP
SPACE > REVIEW RECENT ITEMS. Select the unused
program(s) and tap FREE UP.
The device does not Scanning application is Load a scanning application on the device or enable
decode with reading not loaded. DataWedge. See the system administrator.
bar code. Unreadable bar code. Ensure the symbol is not defaced.
Distance between exit Place the device within proper scanning range.
window and bar code is
incorrect.
Device is not Program the device to accept the type of bar code being
programmed for the bar scanned. Refer to the EMDK or DataWedge application.
code.
Device is not If the device does not beep on a good decode, set the
programmed to application to generate a beep on good decode.
generate a beep.
Battery is low. If the scanner stops emitting a laser beam upon a trigger
press, check the battery level. When the battery is low,
the scanner shuts off before the device low battery
condition notification. Note: If the scanner is still not
reading symbols, contact the distributor or the Global
Customer Support Center.

153
Table 14 Troubleshooting the MC93XX

Problem Cause Solution

Device cannot find Too far from other Move closer to the other Bluetooth device(s), within a
any Bluetooth Bluetooth devices. range of 10 meters (32.8 feet).
devices nearby. The Bluetooth device(s) Turn on the Bluetooth device(s) to find.
nearby are not turned
on.
The Bluetooth device(s) Set the Bluetooth device(s) to discoverable mode. If
are not in discoverable needed, refer to the device’s user documentation for help.
mode.
Cannot unlock User enters incorrect If you enter an incorrect password eight times, you are
device. password. requested to enter a code before trying again.
If you forgot the password, contact your system
administrator.
Battery pack The battery is not Remove and reinsert the battery into the device.
communication inserted properly.
error. Remove and reinsert the battery into the device.
The battery is properly
inserted, however,
when the terminal is in
an active vibration
environment or has
fallen from a high
vantage point (more
than 8 ft), it might
interrupt battery
communication.
The battery Remove the battery and insert a new battery into the
communication pin is device.
damaged.

154
 Specifications

Introduction
The following sections provide technical specification for the device.

MC93XX Technical Specifications

The following table summarizes the MC93XX’s intended operating environment and technical hardware
specifications.

Table 15 MC93XX Technical Specifications

Item Description
Physical Characteristics
Dimensions 9.4 in L x 3.45 in W x 7.4 in H
240 mm L x 88 mm W x 189 mm H
Weight 26.9 oz./765g with battery
Display 4.3” WVGA (800 x 480), color display
Imager Window Corning® Gorilla® Glass
Touch Panel Dual mode capacitive touch with finger, gloved finger or stylus input
(conductive stylus sold separately), Screen Protector, Corning®
Gorilla® Glass touch panel with air gap (standard model) or optically
bonded (freezer model).
Backlight LED backlight display
Battery 7000mAh PowerPrecision+ standard battery
5000mAh PowerPrecision+ freezer battery
7000mAh PowerPrecision+ non-incendive battery
Expansion Slot User accessible microSD slot. Supports up to 32 GB microSDHC and
up to 256 GB microSDXC.
Network Connections USB 2.0 High Speed (Host & Client), WLAN and WPAN (Bluetooth)
Notification Audible tone; Multi-color LED bar (between keyboard and display), and
haptic feedback.
Keypad Options 53 Key Standard, 53 Key Terminal Emulation (VT, 5250, and 3270), 43
Key Shifted Alpha, 34 Key Numeric, 58-Keys OmniiXT15f, and
29-Keys Shifted Alpha.

155
 Specifications

Table 15 MC93XX Technical Specifications (Continued)

Item Description
Voice Speaker, Microphone, PTT Voice (Internal Speaker and Bluetooth
Wireless Headset Support).
Audio Speaker
Performance Characteristics
CPU Qualcomm Snapdragon ™ 660 octa-core, 2.2 GHz
Operating System Android 8.1 Oreo with Zebra’s Restricted Mode for control over GMS
and other services.
Memory 4 GB RAM/32 GB Flash pSLC.
Output Power (USB) USB: 5 VDC @ 500 mA max.
User Environment
Operating Temperature Standard: -4°F to 122°F/-20°C to +50°C
Freezer: -22°F to 122°F/-30°C to +50°C
Storage Temperature -40°F to 158°F/-40°C to 70°C
Charging Temperature 0°C to 40°C (32°F to 104°F)
Humidity Standard: 5% to 95%, non-condensing
Freezer: 5% to 95%, condensing
Drop Specification Standard: 8 ft. (2.4m) drops to concrete across temperature per
MIL-STD-810G.
Freezer: 7 ft. (2.1m) drops to concrete across temperature per
MIL-STD-810G.
Tumble Specification 4,000 3.3 ft. (1m) tumbles; meets and exceeds IEC tumble
specification.
Sealing IP67 and IP65 per IEC sealing specification.
Vibration 4 g’s PK Sine (5 Hz to 2 kHz); 0.04 g 2/Hz Random (20 Hz to 2 kHz);
60 minute duration per axis, 3 axis
Thermal Shock -40°C to 70°C (-40°F to 158°F) rapid transition.
Electrostatic Discharge (ESD) +/-15kVdc air discharge
+/-8kVdc direct discharge
+/-8kVdc indirect discharge
Interactive Sensor Technology (IST)
Ambient Light Sensor Ambient light sensor used to auto adjust display and keyboard back
light brightness.
Motion Sensor 3-axis accelerometer provides motion-sensing for dynamic screen
orientation.
Wireless LAN Data Communications
Radio IEEE 802.11 a/b/g/n/ac/d/h/i/r/k/w; Wi-Fi certified; IPv4, IPv6, 2x2
MU-MIMO
Data Rates 5GHz: 802.11a/n/ac — up to 866.7 Mbps
2.4GHz: 802.11b/g/n — up to 300 Mbps

156
 Specifications

Table 15 MC93XX Technical Specifications (Continued)

Item Description
Operating Channels Channel 1-13 (2412-2472 MHz); Chan 36-165 (5180-5825 MHz)
Channel Bandwidth: 20, 40, 80 MHz
Actual operating channels/ frequencies and bandwidths depend on
regulatory rules and certification agency.
Security and Encryption WEP (40 or 104 bit); WPA/WPA2 Personal (TKIP and AES);
WPA/WPA2 Enterprise (TKIP and AES) - EAP-TTLS (PAP, MSCHAP,
MSCHAPv2), EAP-TLS, PEAPv0-MSCHAPv2, PEAPv1-EAP-GTC and
LEAP, EAP-PWD
Data in Motion: FIPS 140-2 Level 1
Data at Rest: FIPS 140-2 Level 1
Certifications WFA (802.11n, WMM-PS, 802.11ac, PMF, WMM-AC, Voice
Enterprise, WiFi Direct and WPS 2.0)
Fast Roam PMKID caching; Cisco CCKM; 802.11r; OKC
Wireless PAN Data
Bluetooth Class II, Bluetooth V5.0 with BR/EDR and Bluetooth Low Energy (BLE)
Support
Communication and Messaging
Workforce Connect PTT Express (included) provides instant push-to-talk small group communications
across Wi-Fi networks. Workforce Connect PTT Pro (supported) provides a scalable network agnostic
push-to-talk solution which also includes messaging, location services and two-way radio integration.
Workforce Connect Voice client (supported) enables the MC9300 to function as a full featured mobile
telephone with multi-line capability across Wi-Fi networks.
Device Approvals and Compliance
TAA Trade Agreement Act optional on select configurations Complaint,
(Optional on select configurations) FIPS 140-2 (DIM & DAR) support; FIPS 140-2 Level 1: Data in Motion
and Data at Rest
Non-Incendive (NI) Suitable for use in Class I, II, III Div 2
(Optional on select configurations) Safety: cULus Listing - ISA/ANSA 12.12.01
Gases: Class I - Groups A, B, C, D
Dusts: Class II - Groups F, G
Fibers & Flyings: Class III
-20°C ≤ Ta ≥ +50°C T6
Peripherals and Accessories
Cradles Single slot USB/Charge, Four-slot charger only.
Battery Chargers 4-slot battery charger and16-slot battery charger.
Other Accessories USB/charge snap-on cup, forklift holder, soft holster, screen protector,
hand strap, stylus

157
 Specifications

Table 15 MC93XX Technical Specifications (Continued)

Item Description
Data Capture
Scanning SE965: 1D standard range scan engine.
SE4750-SR: Standard Range omnidirectional 1D/2D imaging engine
reads 1D and 2D symbols.
(Premium only).
SE4850-ER: Extended range omnidirectional 1D/2D imaging engine
reads 1D and 2D symbols.
SE4750DPM: Omnidirectional 1D and 2D imaging engine reads Direct
Part Marking.
SE4750DPW: Omnidirectional 1D and 2D imaging engine reads wide
1D and Direct Part Marking.
SE4770-SR: Standard range next generation omnidirectional 1D/2D
imaging engine.
Camera Front: 5MP fixed focus and 2.0 aperture.
Rear: 13MP autofocus, 2.2 aperture, flash LED generates balanced
white light, support torch mode, and supports rear camera barcode
scanning.
Near Field Communications Tap to Pair, ISO 14443 Type A and B, FeliCa cards in Reader Mode,
(NFC) ISO 15693 cards, P2P mode and Card Emulation via Host (HCE)
support.
Data Capture Options
Laser Decode Capability Code 39, Code 128, Code 93, Codabar, Code 11, Discrete 2 of 5,
Interleaved 2 of 5, EAN-8, EAN-13, MSI, UPCA, UPCE, UPC/EAN
supplementals, Coupon Code, Trioptic 39, Webcode, RSS-14, RSS
Limited, RSS Expanded, Chinese 2 of 5
Imaging Decode Capability Code 39, Code 128, Code 93, Codabar, Code 11, Interleaved 2 of 5,
Discrete 2 of 5, MSI, EAN-8, EAN-13, UPCA, UPCE, UPC/EAN
supplementals, Coupon Code, Trioptic 39, Webcode, TLC39,
Composite AB, Composite C, Micro PDF-417, PDF-417, Macro
PDF-417, (Macro) Micro PDF-417, QR Code, RSS Expanded, RSS
Limited, RSS-14, Data Matrix, Maxi Code, US Postnet, US Planet, UK
4-state, Australian 4-state, Canadian 4-state, Japanese 4-state, Dutch
Kix, Chinese 2 of 5, USPS 4-state (US4CB), Aztec, microQR, Dotcode

158
Keypads

Introduction
The device has the following interchangeable modular keypads:
• 58-key Alpha Numeric Function keypad
• 53-key Standard keypad
• 53-key IBM-5250 Emulator keypad
• 53-key IBM-3270 Emulator keypad
• 53-key VT Emulator keypad
• 43-key Shifted Alpha keypad
• 34-key Numeric keypad
• 29-key Shifted Alpha keypad.

To support specialized applications, you can change the modular keypads in the field when required.

Removing and Replacing Keypads

1. Power off the device.
2. Remove the battery.
3. Using a Torx T8 screwdriver with a large grip, remove the two keypad latch screws from inside the
battery slot.

Figure 129 Remove Keypad Latch Screws

Keypad Latch Screws

159
 Keypads

4. Slide the keypad latches toward the bottom of the device.

Figure 130 Release Keypad Latches

Screwdriver

Keypad Latches

NOTE: If the keypad latches are hard to move, use a screwdriver to gently slide them towards the bottom of the device.

5. Turn the device over so that the keypad is visible.

6. Using a Torx T8 screwdriver with a large grip, remove the two keypad assembly screws from the top of the
keypad.

Figure 131 Remove Keypad

Keypad Screws

Keypad

microSD Card Holder

160
 Keypads

7. Lift the keypad from the device.

8. Align the keypad along the bottom ridge of the device, and then lay it flat.

Figure 132 Replace Keypad

9. Using a Torx T8 screwdriver with a large grip and a long shaft, secure the keypad to the device using the
two screws. Torque screws to 5.8 kgf-cm or 5.0 lbf-in.

Figure 133 Replace Keypad Screws

Keypad Screws

10.Turn the device over so that the keypad latches are visible.

161
 Keypads

11.Slide both the keypad latches toward the top of the device.

Figure 134 Slide Keypad Latches

Keypad Latches

12.Using a Torx T8 screwdriver, replace the two keypad latch screws inside the battery slot and torque to 5.8
kgf-cm or 5.0 lbf-in.

Figure 135 Replace Keypad Latch Screws

Keypad Latch Screws

13.Insert the battery.

14.Press and hold the Power key to power on the device.

162
 Keypads

58-Keys Alpha Numeric Function Keypad

The 58-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is
color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by
an application so the device’s keypad may not function exactly as described. See the Key Descriptions table
for key and button details, and the Keypad Special Functions table for the keypad’s various functions.

Figure 136 58-Keys Alpha Numeric Function Keypad

Table 16 58-Key Alpha Numeric Function Keypad Key Descriptions

Key Description
Power (Red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1 User programmable key. By default, P1 is the dedicated PTT key.

Scan (Yellow) Activates the scanner/imager in a scan enabled application.

163
 Keypads

Table 16 58-Key Alpha Numeric Function Keypad Key Descriptions (Continued)

Key Description
ESC Exits the current operation.

TAB Tab function.

Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

Alpha Use the alpha keys for alphabetic characters.

BKSP Backspace function.

SPACE Space function.

Numeric/Application The numeric keys generate keycodes 0 to 9.

Function (blue) Press and release the blue function key to activate the keypad alternate functions
(shown on the keypad in Blue). Press the Blue function key once to put the
keyboard into one-shot mode. The icon appears on the Status bar. Press the
Blue function key again the keypad is locked in function mode, and the icon
appears in the Status bar. Press and release the Blue function key a third time to
return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the icon
appears.
Control Press and release the CTRL key to activate the keypad alternate CTRL functions.
The icon appears in the status bar.
Press the Blue key followed by the CTRL key to activate the keypad alternate ALT
functions. The icon appears in the status bar.

164
 Keypads

Table 16 58-Key Alpha Numeric Function Keypad Key Descriptions (Continued)

Key Description
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The icon
appears in the status bar. Press and release the SHIFT key again to disable the
Shift Lock state.
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify the
symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

Enter Executes a selected item or function.

165
 Keypads

53-Keys Standard Keypad

The 53-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is
color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by
an application so the device’s keypad may not function exactly as described. See the Key Descriptions table
for key and button details, and the Keypad Special Functions table for the keypad’s various functions.

Figure 137 53-Keys Standard Keypad

Table 17 53-Key Standard Keypad Key Descriptions

Key Description
Power (Red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1 / P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (Yellow) Activates the scanner/imager in a scan enabled application.

166
 Keypads

Table 17 53-Key Standard Keypad Key Descriptions (Continued)

Key Description
Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

ESC Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Numeric/Application The numeric keys generate keycodes 0 to 9.

Function (blue) Press and release the blue function key to activate the keypad alternate functions
(shown on the keypad in Blue). Press the Blue function key once to put the
keyboard into one-shot mode. The icon appears on the Status bar. Press the
Blue function key again the keypad is locked in function mode, and the icon
appears in the Status bar. Press and release the Blue function key a third time to
return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the icon
appears.
Control Press and release the CTRL key to activate the keypad alternate CTRL functions.
The icon appears in the status bar.
Press the Blue key followed by the CTRL key to activate the keypad alternate ALT
functions. The icon appears in the status bar.
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The icon
appears in the status bar. Press and release the SHIFT key again to disable the
Shift Lock state.

167
 Keypads

Table 17 53-Key Standard Keypad Key Descriptions (Continued)

Key Description
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify the
symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

Enter Executes a selected item or function.

168
 Keypads

53-Keys IBM-5250 Emulator Keypad

The IBM-5250 emulator keypad contains a Power button, application keys, scroll keys and a function key. The
keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be
changed by an application so the device’s keypad may not function exactly as described. See the Key
Descriptions table for key and button details, and the Keypad Special Functions table for the keypad’s various
functions.

Figure 138 53-Keys IBM-5250 Emulator Keypad

NOTE: The IBM-5250 emulator configuration is only used when the device is running the 5250 emulation software.

169
 Keypads

Table 18 IBM-5250 Emulator Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1/P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (yellow) Activates the scanner/imager in a scan enabled application.

Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

ENT The enter key.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Application The numeric keys generate keycodes 0 to 9.

Function (blue) Press and release the blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key once to
put the keyboard into one-shot mode. The icon appears on the Status bar.
Press the Blue function key again the keypad is locked in function mode, and
the icon appears in the Status bar. Press and release the Blue function key a
third time to return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
Control Press and release the CTRL key to activate the keypad alternate CTRL
functions. The icon appears in the status bars.
Press the Blue key followed by the CTRL key to activate the keypad alternate
ALT functions. The icon appears in the status bar.

170
 Keypads

Table 18 IBM-5250 Emulator Descriptions (Continued)

Key Description
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The
icon appears in the status bar. Press and release the SHIFT key again to
disable the Shift Lock state.
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify
the symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

FIELD_EXIT Executes a selected item or function.

171
 Keypads

53-Keys IBM-3270 Emulator Keypad

The IBM-3270 emulator keypad contains a Power button, application keys, scroll keys and a function key. The
keypad is color-coded to indicate the alternate function key (blue, green, orange) values. Note that keypad
functions can be changed by an application so the device’s keypad may not function exactly as described. See
the Key Descriptions table for key and button details.

Figure 139 53-Keys IBM-3270 Emulator Keypad

NOTE: The IBM-3270 emulator configuration is only used when the device is running the 3270 emulation software.

Table 19 IBM-3270 Emulator Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1/P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (yellow) Activates the scanner/imager in a scan enabled application.

172
 Keypads

Table 19 IBM-3270 Emulator Descriptions (Continued)

Key Description
Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

CLR The clear key.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Application The numeric keys generate keycodes 0 to 9.

Function (Blue) Press and release the Blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key once to
put the keyboard into one-shot mode. The icon appears on the Status bar.
Press the Blue function key again the keypad is locked in function mode, and
the icon appears in the Status bar. Press and release the Blue function key a
third time to return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
Control Press and release the CTRL key to activate the keypad alternate CTRL
functions (shown on the keypad in Green). The icon appears in the status
bars.
Press the Blue key followed by the CTRL key to activate the keypad alternate
ALT functions. The icon appears in the status bar.
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions (shown on the keypad in Orange). The icon appears in the status
bar. After pressing another key, the keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The
icon appears in the status bar. Press and release the SHIFT key again to
disable the Shift Lock state.

173
 Keypads

Table 19 IBM-3270 Emulator Descriptions (Continued)

Key Description
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify
the symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol for this keyboard.

ENTER Executes a selected item or function.

174
 Keypads

53-Keys VT Emulator Keypad

The VT emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad
is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed
by an application so the device’s keypad may not function exactly as described. See the Key Descriptions table
for key and button details, and the Keypad Special Functions table for the keypad’s various functions.

Figure 140 53-Keys VT Emulator Keypad

NOTE: The VT emulator configuration is only used when the device is running the VT emulation software.

Table 20 VT Emulator Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for
more information.
P1/P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (yellow) Activates the scanner/imager in a scan enabled application.

175
 Keypads

Table 20 VT Emulator Descriptions (Continued)

Key Description
Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

ESC Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Application The numeric keys generate keycodes 0 to 9. These keys can also be
assigned to an application.

Function (blue) Press and release the blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key
once to put the keyboard into one-shot mode. The icon appears on
the Status bar. Press the Blue function key again the keypad is locked in
function mode, and the icon appears in the Status bar. Press and
release the Blue function key a third time to return to the default keypad
functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
Control Press and release the CTRL key to activate the keypad alternate CTRL
functions. The icon appears in the status bar.
Press the Blue key followed by the CTRL key to activate the keypad
alternate ALT functions. The icon appears in the status bar.
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another
key, the keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state.
The icon appears in the status bar. Press and release the SHIFT key
again to disable the Shift Lock state.

176
 Keypads

Table 20 VT Emulator Descriptions (Continued)

Key Description
Period/Decimal Point Produces a period for alpha entries and decimal point for numeric
entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a
single tap you can select via touch input or the keyboard, 1-9 numerical
keys. Double tapping the Diamond key locks the 3x3 grid, and you can
select multiple keys. Pressing the Diamond key a third time closes the
3x3 matrix. You can modify the symbols in the 3x3 matrix using the
StageNow utility in the KeyMappingMgr settings.

NOTE: This is the default symbol layout for this keyboard.

Enter Executes a selected item or function.

177
 Keypads

43-Keys Shifted Alpha Keypad

The 43-key keypad contains a Power button, application keys, scroll keys and a function key. The keypad is
color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values.
Note that keypad functions can be changed by an application so the MC93XX’s keypad may not function
exactly as described. See the Key Descriptions table for key and button details, and the Keypad Special
Functions table for the keypad’s various functions.

Figure 141 43-Keys Shifted Alpha Keypad

Table 21 43 Shifted Alpha Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1/P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (yellow) Activates the scanner/imager in a scan enabled application.

178
 Keypads

Table 21 43 Shifted Alpha Descriptions (Continued)

Key Description
Up and Down Moves up and down from one item to another.

Left and Right Moves left and right from one item to another.

ESC Exits the current operation.

CTRL Press and release the CTRL key to activate the keypad alternate CTRL
functions. The icon appears in the status bars.

ALT Press the Blue key followed by the CTRL key to activate the keypad alternate
ALT functions. The icon appears in the status bar.

SPACE/BKSP Space and backspace functions.

Application The numeric keys generate keycodes 0 to 9.

Function (Blue) Press and release the blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key once to
put the keyboard into one-shot mode. The icon appears on the Status bar.
Press the Blue function key again the keypad is locked in function mode, and
the icon appears in the Status bar. Press and release the Blue function key a
third time to return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
Function (Orange) Press and release the blue function key to activate the alpha key functions
(shown on the keypad in Orange).
Press and release the Orange function key to activate the keypad alternate
functions (shown on the keypad in Orange). Press the Orange function key
once to put the keyboard into one-shot mode. The icon appears on the
Status bar. Press the Orange function key again the keypad is locked in function
mode, and the icon appears in the Status bar. Press and release the Orange
function key a third time to return to the default keypad functions, and the
icon clears.

179
 Keypads

Table 21 43 Shifted Alpha Descriptions (Continued)

Key Description
Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The
icon appears in the status bar. Press and release the SHIFT key again to
disable the Shift Lock state.
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify
the symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

Enter Executes a selected item or function.

180
 Keypads

34-Keys Numeric Keypad

The 34-key keypad contains a Power button, application keys, scroll keys and a function key. The keypad is
color-coded to indicate the alternate function key (blue) values and the alternate Shift key values. Note that
keypad functions can be changed by an application so the MC93XX’s keypad may not function exactly as
described. See the Key Descriptions table for key and button details.

Figure 142 34-Keys Numeric Keypad

181
 Keypads

Table 22 34-Keys Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify
the symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

ESC Exits the current operation.

TAB Tab function.

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Up and Down Moves up and down from one item to another.

BKSP Space and backspace functions.

Application The numeric keys generate keycodes 0 to 9.

182
 Keypads

Table 22 34-Keys Descriptions (Continued)

Key Description
Function (blue) Press and release the blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key once to
put the keyboard into one-shot mode. The icon appears on the Status bar.
Press the Blue function key again the keypad is locked in function mode, and
the icon appears in the Status bar. Press and release the Blue function key a
third time to return to the default keypad functions, and the icon clears.
Press the Blue key followed by the CTRL key to activate the keypad alternate
ALT functions. The icon appears in the status bar.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
CTRL Press and release the CTRL key to activate the keypad alternate CTRL
functions. The icon appears in the status bars.

Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The
icon appears in the status bar. Press and release the SHIFT key again to
disable the Shift Lock state.
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

ENT Executes a selected item or function.

183
 Keypads

29-Keys Shifted Alpha Keypad

The 29-key keypad contains a Power button, application keys, scroll keys and a function key. Note that keypad
functions can be changed by an application so the MC93XX’s keypad may not function exactly as described.
See the Key Descriptions table for key and button details, and the Keypad Special Functions table for the
keypad’s various functions.

Figure 143 29-Keys Keypad

Table 23 29-Keys Descriptions

Key Description
Power (red) Turns the device on and off.
Performs a warm boot and a hard reset. See Resetting the Device for more
information.
P1/P2 User programmable keys:
• By default, P1 is the dedicated PTT key.
• By default, P2 acts like another Scan key.
Scan (yellow) Activates the scanner/imager in a scan enabled application.

Up and Down Moves up and down from one item to another.

184
 Keypads

Table 23 29-Keys Descriptions (Continued)

Key Description
Left and Right Moves left and right from one item to another.

ESC Exits the current operation.

Shift Press and release the SHIFT key to activate the keypad alternate SHIFT
functions. The icon appears in the status bar. After pressing another key, the
keypad returns to the non-shift state.
Press and release the SHIFT key twice to enable the Shift Lock state. The
icon appears in the status bar. Press and release the SHIFT key again to
disable the Shift Lock state.
BKSP Backspace function.

TAB Tab function.

Application The numeric keys generate keycodes 0 to 9.

Application The application keys.

Function (Blue) Press and release the blue function key to activate the keypad alternate
functions (shown on the keypad in Blue). Press the Blue function key once to
put the keyboard into one-shot mode. The icon appears on the Status bar.
Press the Blue function key again the keypad is locked in function mode, and
the icon appears in the Status bar. Press and release the Blue function key a
third time to return to the default keypad functions, and the icon clears.
Press the blue function key and SHIFT to activate CAPSLOCK mode, the
icon appears.
Function (Orange) Press and release the blue function key to activate the alpha key functions
(shown on the keypad in Orange).
Press and release the Orange function key to activate the keypad alternate
functions (shown on the keypad in Orange). Press the Orange function key
once to put the keyboard into one-shot mode. The icon appears on the
Status bar. Press the Orange function key again the keypad is locked in function
mode, and the icon appears in the Status bar. Press and release the Orange
function key a third time to return to the default keypad functions, and the
icon clears.

185
 Keypads

Table 23 29-Keys Descriptions (Continued)

Key Description
Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

Diamond Provides a 3x3 matrix on the screen with nine additional symbols. With a single
tap you can select via touch input or the keyboard, 1-9 numerical keys. Double
tapping the Diamond key locks the 3x3 grid, and you can select multiple keys.
Pressing the Diamond key a third time closes the 3x3 matrix. You can modify
the symbols in the 3x3 matrix using the StageNow utility in the KeyMappingMgr
settings.

NOTE: This is the default symbol layout for this keyboard.

Enter Executes a selected item or function.

186
 Keypads

Keypad Special Functions

The keypad special functions are color coded on the keypads. For example, on the 53-key keypad, the display
backlight icon is blue indicating that the blue function key must be selected first to access the display backlight.

Table 24 Keypad Special Functions

58 Key 53 Key ( 34 Key

Standard,
Icon Special (Omnii 5250, 3270, 43 Key (Omnii
29 Key
Function XT15f) VT) XT15f)

Decreases the Blue key+Y Blue key + X Keylight+Down Blue key+F10 Blue key+7
keyboard
backlight
intensity.
Increases the Blue key+Z Blue key + Y Keylight+Up Blue key+F11 Blue key+9
keypad backlight
intensity.

Increases Blue key+N Blue key + D Blue key+F1 Blue key+F1 Blue key+7
display backlight
intensity.
Decreases Blue key+M Blue key + I Blue key+F5 Blue key+F5 Blue key+4
display backlight
intensity.
Increases Blue key+R Blue key + H Blue key+F4 Blue key+F4 Blue key+3
overall system
volume.
Decreases Blue key+Q Blue key + M Blue key+F8 Blue key+F8 Blue key+2
overall system
volume.
Enables Alt Blue Blue key + ALT Blue key+
keypad key+CTRL CTRL CTRL
functions.

NOTE: Only appli-

cable if the Large
Key Indicator is en-
abled.
Caps Lock Blue BLUE + Blue Blue key
key+SHIFT SHIFT key+SHIFT SHIFT

Sends TAB TAB Blue key + Blue TAB TAB

character Space key+SPACE
(forward tab).

NOTE: Use of display and keypad backlighting can significantly reduce battery life.

187
 Keypads

Special Characters
The keypads can be selected as necessary to support specialized applications. The keypads contain a Power
button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate
function key (blue/orange) values. The following table details special character generation. Characters can
also be generated using the keyboard input panel.

NOTE: Shift-1 through Shift-0 only applies to the Standard 53-key keyboard. On the 5250, 3270, and VT 53-key keyboards
the Shift + <num> combinations generate F11-F20 keys.
asdasd

Table 25 Special Character Generation Map

58 Key 34 Key
Special (Omnii 53 Key (Standard, 43 Key (Omnii 29 Key
Character XT15f) 5250, 3270, VT) XT15f)

[ (open square Diamond+2 Blue Key+E Diamond+8 Diamond+2 Diamond+8

bracket)
] (close square Diamond+3 Blue Key+F Diamond+9 Diamond+3 Diamond+9
bracket)
/ (forward slash) Not Blue Key+V Blue Key+F12 Not Blue Key+8
Applicable Applicable
\ (backslash) Not Blue Key+G Not Applicable Not Not
Applicable Applicable Applicable
= (equal sign) Not Blue Key+W Blue Key+Bksp Not Blue Key+5
Applicable Applicable
; (semi-colon) Not Blue Key+R Not Applicable Not Diamond+5
Applicable Applicable
` (apostrophe) Not Blue Key+J Not Applicable Not Not
Applicable Applicable Applicable
, (comma) Shift+. (Dot) Blue Key+A Not Applicable Blue Key+. Not
(Dot) Applicable
. (period) Dot Blue Key+B Not Applicable Dot Not
Applicable
! (exclamation Shift+1 Shift+1 Shift+1 Shift+1 Shift+1
sign)
@ (at sign) Shift+2 Shift+2 Shift+2 Shift+2 Shift+2
# (pound sign) Shift+3 Shift+3 Shift+3 Shift+3 Shift+3
$ (dollar sign) Shift+4 Shift+4 Shift+4 Shift+4 Shift+4
% (percent sign) Shift+5 Shift+5 Shift+5 Shift+5 Shift+5
^ (carat) Shift+6 Shift+6 Shift+6 Shift+6 Shift+6
& (ampersand) Shift+7 Shift+7 Shift+7 Shift+7 Shift+7
* (asterisk) Shift+8 Blue Key+U Blue Key+F11, Shift+8 Shift+8
Shift+8 Shift+8

( (open Shift+9 Shift+9 Shift+9 Shift+9 Shift+9

parenthesis)

188
 Keypads

Table 25 Special Character Generation Map (Continued)

58 Key 34 Key
Special (Omnii 53 Key (Standard, 43 Key (Omnii 29 Key
Character XT15f) 5250, 3270, VT) XT15f)

) (close Shift+0 Shift+0 Shift+0 Shift+0 Shift+0

parenthesis)
' (single quote) Not Blue Key+C Not Applicable Not Not
Applicable Applicable Applicable
" (double quote) Not Shift+Blue Key+C Not Applicable Not Not
Applicable Applicable Applicable
+ (plus sign) Not Blue Key+S Blue Key+F9 Not Orange Key+
Applicable Applicable - (Minus)
- (dash) Not Blue Key+N, Blue Key+F10 Not Minus key
Applicable Blue Key+T Applicable

: (colon) Diamond+5 Shift+Blue Key+R Diamond+5 Diamond+5 Diamond+6

< (less than sign) Shift+Blue Shift+Blue Key+A Not Applicable Shift + Blue Shift+
Key+. (Dot) Key+. (Dot) Orange Key+
. (Dot)
> (greater than Shift+. (Dot) Shift+Blue Key+B Shift+. (Dot) Shift+. (Dot) Shift+. (Dot)
sign)
? (question mark) Not Shift+Blue Key+V Shift+Blue Not Shift +Blue
Applicable Key+F12 Applicable Key+8
_ (underscore) Diamond+9 Shift+Blue Key+N Diamond+3 Diamond+9 Shift + -
(Minus)
{ (open curly Not Shift+Blue Key+E Not Applicable Not Not
bracket) Applicable Applicable Applicable
} (close curly Not Shift+Blue Key+F Not Applicable Not Not
bracket) Applicable Applicable Applicable
~ (tilde) Diamond+7 Shift+Blue Key+J Diamond+1 Diamond+7 Not
Applicable
| (pipe) Diamond+1 Shift+Blue Key+G Diamond+7 Diamond+1 Not
Applicable

189
Index

Numerics B
16-slot spare battery charger . . . . . . . . . . . . . . . . . . . 134 backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
29 keys keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 backlight intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
3270 emulator keypad . . . . . . . . . . . . . . . . . . . . . . . . 172 backup power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
34 keys numeric keypad . . . . . . . . . . . . . . . . . . . . . . 181 barcode capture
43 keys shifted alpha keypad . . . . . . . . . . . . . . . . . . 178 imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
4-slot spare battery charger . . . . . . . . . . . . . . . . . . . . 133 laser scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
5250 emulator keypad . . . . . . . . . . . . . . . . . . . . . . . . 169 barcode scanning
53-key standard keypad . . . . . . . . . . . . . . . . . . . . . . 166 DS3678 digital scanner . . . . . . . . . . . . . . . . . . . 100
58-key alpha numeric function keypad . . . . . . . . . . . 163 integrated imager . . . . . . . . . . . . . . . . . . . . . . . . . 99
5-slot ethernet cradle . . . . . . . . . . . . . . . . . . . . . . . . . 131 battery
monitor usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
battery low notification . . . . . . . . . . . . . . . . . . . . . . . . . 29
A battery management . . . . . . . . . . . . . . . . . . . . . . . . . . 28
accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 battery level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
adaptive frequency hopping . . . . . . . . . . . . . . . . . . . 116 battery present status . . . . . . . . . . . . . . . . . . . . . . 28
alarms only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 battery manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
albums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 battery optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 battery safety guidelines . . . . . . . . . . . . . . . . . . . . . . 148
sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 beeper volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
working with albums . . . . . . . . . . . . . . . . . . . . . . . 79 bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114, 116
ambient display setting . . . . . . . . . . . . . . . . . . . . . . . . 33 change name . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
approved cleanser . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 disabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
approved cleanser active ingredients . . . . . . . . . . . . 149 discovering devices . . . . . . . . . . . . . . . . . . . . . . 119
apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 enabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
accessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
adding shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . 46 PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
battery manager . . . . . . . . . . . . . . . . . . . . . . . . . . 64 power states . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
datawedge demonstration . . . . . . . . . . . . . . . . . . . 84 security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
device central . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
diagnostic tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
C
files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54, 72
PTT Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 photo settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
RxLogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 rear camera photo settings . . . . . . . . . . . . . . . . . . 76
RxLogger Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 rear camera video settings . . . . . . . . . . . . . . . . . . 77
shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 recording videos . . . . . . . . . . . . . . . . . . . . . . . . . . 74
sound recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 taking panoramic photos . . . . . . . . . . . . . . . . . . . 74
taking photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
video settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

190
 Index

camera settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76 scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

cast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 DS3678 digital scanner
change bluetooth name . . . . . . . . . . . . . . . . . . . . . . . 119 barcode scanning . . . . . . . . . . . . . . . . . . . . . . . .100
characters, special . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 data capture . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
charge only adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 140
charging spare batteries . . . . . . . . . . . . . . . . . . . . . . . 24
cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149, 150
E
battery connectors . . . . . . . . . . . . . . . . . . . . . . . 151 EAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
camera and exit window . . . . . . . . . . . . . . . . . . . 151 enable bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
cradle connectors . . . . . . . . . . . . . . . . . . . . . . . . 151
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 F
housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 features
instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 MC93XX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 file transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
cleaning instructions . . . . . . . . . . . . . . . . . . . . . . . . . 150 files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
connect to WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 finger usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
adding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
cradle font size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
connector cleaning . . . . . . . . . . . . . . . . . . . . . . . 151

G
D
general sound setting . . . . . . . . . . . . . . . . . . . . . . . . .35
data capture google
DS3678 digital scanner . . . . . . . . . . . . . . . . . . . . 100 account setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
integrated imager . . . . . . . . . . . . . . . . . . . . . . . . . 99 mobile services . . . . . . . . . . . . . . . . . . . . . . . . . . .38
datawedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 H
datawedge demonstration . . . . . . . . . . . . . . . . . . . . . . 84 hand strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
device central . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 hard reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
paging an RS6000 ring scanner . . . . . . . . . . . . . . 98 harmful ingredients . . . . . . . . . . . . . . . . . . . . . . . . . .149
device settings home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
accessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 moving items . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
diagnostic tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
battery test information . . . . . . . . . . . . . . . . . . . . . 95 home screen wallpaper . . . . . . . . . . . . . . . . . . . . . . . .48
bluetooth test information . . . . . . . . . . . . . . . . . . . 96 hot swap mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
gps test information . . . . . . . . . . . . . . . . . . . . . . . . 96
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
system test information . . . . . . . . . . . . . . . . . . . . . 96 I
wlan test information . . . . . . . . . . . . . . . . . . . . . . . 96 install microSD card . . . . . . . . . . . . . . . . . . . . . . . . . . .19
wwan test information . . . . . . . . . . . . . . . . . . . . . . 96 integrated imager
disable bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 barcode scanning . . . . . . . . . . . . . . . . . . . . . . . . .99
disconnect host computer . . . . . . . . . . . . . . . . . . . . . . 63 data capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
discover bluetooth devices . . . . . . . . . . . . . . . . . . . . 119 operational modes . . . . . . . . . . . . . . . . . . . . . . . . . 99
display backlight intensity . . . . . . . . . . . . . . . . . . . . . 187
display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
display size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 K
do not disturb feature . . . . . . . . . . . . . . . . . . . . . . . . . . 51
key descriptions
DS3678
29 shifted alpha . . . . . . . . . . . . . . . . . . . . . . . . . .184
pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
34 keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
pairing using Bluetooth HID . . . . . . . . . . . . . . . . 111
43 shifted alpha . . . . . . . . . . . . . . . . . . . . . . . . . .178

191
 Index

53-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 sharing information . . . . . . . . . . . . . . . . . . . . . . .122

58-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . 12
IBM-32700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 notification icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
IBM-5250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 notifications
special functions . . . . . . . . . . . . . . . . . . . . . . . . . 187 lock screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
VT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 managing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 priority notifications only . . . . . . . . . . . . . . . . . . . .52
additional character tab . . . . . . . . . . . . . . . . . . . . . 50
alpha tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
O
numeric tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 operational modes
keypads decode mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
29 keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184 pick list mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
3270 emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
34 keys numeric . . . . . . . . . . . . . . . . . . . . . . . . . 181
43 keys shifted alpha . . . . . . . . . . . . . . . . . . . . . 178 P
5250 emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 pairing
53-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 DS3678 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
58-key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 RS507/RS6000 hands-free imager . . . . . . . . . . .107
special functions . . . . . . . . . . . . . . . . . . . . . . . . . 187 using Bluetooth HID (RS507/RS6000) . . . . . . . . 110
types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 using Bluetooth HID(DS3678) . . . . . . . . . . . . . . .111
VT emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 using simple serial interface(RS507/RS6000) . . .109
panoramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
L photo transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
laser scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 camera settings . . . . . . . . . . . . . . . . . . . . . . . . . . .75
lock screen notifications . . . . . . . . . . . . . . . . . . . . . . . 44 cropping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
deleting albums . . . . . . . . . . . . . . . . . . . . . . . . . . .80
M
deleting videos . . . . . . . . . . . . . . . . . . . . . . . . . . .83
maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 panoramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
approved cleanser active ingredients . . . . . . . . . 149 setting as contact icons . . . . . . . . . . . . . . . . . . . . .82
battery safety guidelines . . . . . . . . . . . . . . . . . . . 148 sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
clean battery connectors . . . . . . . . . . . . . . . . . . . 151 sharing albums . . . . . . . . . . . . . . . . . . . . . . . . . . .80
clean camera and exit window . . . . . . . . . . . . . . 151 sharing videos . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
clean cradle connectors . . . . . . . . . . . . . . . . . . . 151 taking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
clean display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 viewing and browsing . . . . . . . . . . . . . . . . . . . . . . 81
clean housing . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 watching videos . . . . . . . . . . . . . . . . . . . . . . . . . . .83
cleaning frequency . . . . . . . . . . . . . . . . . . . . . . . 150 working with albums . . . . . . . . . . . . . . . . . . . . . . .79
cleaning instructions . . . . . . . . . . . . . . . . . . . . . . 149 working with photos . . . . . . . . . . . . . . . . . . . . . . . .81
cleaning materials required . . . . . . . . . . . . . . . . . 150 working with videos . . . . . . . . . . . . . . . . . . . . . . . .83
device cleaning instructions . . . . . . . . . . . . . . . . 150 PTT Express
harmful ingredients . . . . . . . . . . . . . . . . . . . . . . . 149 audible indicators . . . . . . . . . . . . . . . . . . . . . . . . .87
maintaining the device . . . . . . . . . . . . . . . . . . . . 148 disabling communication . . . . . . . . . . . . . . . . . . . .89
special cleaning notes . . . . . . . . . . . . . . . . . . . . . 150 enabling communication . . . . . . . . . . . . . . . . . . . .87
managing notifications . . . . . . . . . . . . . . . . . . . . . . . . . 42 group calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
MC93XX notification icons . . . . . . . . . . . . . . . . . . . . . . . . . .87
features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 private response . . . . . . . . . . . . . . . . . . . . . . . . . .88
monitor battery usage . . . . . . . . . . . . . . . . . . . . . . . . . 28 talk groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Voice Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
PTT-Express
N PTT communication . . . . . . . . . . . . . . . . . . . . . . .88
near field communications . . . . . . . . . . . . . . . . . . . . . 120
NFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
reading cards . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

192
 Index

Q override do not disturb for specific apps . . . . . . . . 54

priority notifications only . . . . . . . . . . . . . . . . . . . .52
quick access panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
quick settings sharing information using NFC . . . . . . . . . . . . . . . . .122
edit icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 soft reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
software version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
R software versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
sound recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
reading NFC cards . . . . . . . . . . . . . . . . . . . . . . . . . . 121 special characters . . . . . . . . . . . . . . . . . . . . . . . . . . .188
remove wi-fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
replacing battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
reset device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
hard reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 T
soft reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 taking a panoramic photo . . . . . . . . . . . . . . . . . . . . . . .74
RS507 touch mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 transferring files using USB . . . . . . . . . . . . . . . . . . . . .62
RS507 hands-free imager . . . . . . . . . . . . . . . . . . . . . 100 troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
RS507 scanning . . . . . . . . . . . . . . . . . . . . . . . . 103, 106
RS507/RS6000
pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 U
pairing using Bluetooth HID . . . . . . . . . . . . . . . . 110 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
pairing using simple serial interface . . . . . . . . . . 109
RS6000
bluetooth ring scanner . . . . . . . . . . . . . . . . . . . . 100 V
scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
videos
RS6000 scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
camera settings . . . . . . . . . . . . . . . . . . . . . . . . . . .76
rubber boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
RxLogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
RxLogger Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
watching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
S working with videos . . . . . . . . . . . . . . . . . . . . . . . .83
volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
scanning VT emulator keypad . . . . . . . . . . . . . . . . . . . . . . . . . .175
considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
DS3678 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
RS507 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 W
RS6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
wakeup sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
screen font size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
screen rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
adding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
wi-fi network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
setting
wireless local area network . . . . . . . . . . . . . . . . . . . .114
camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76
WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
notification LED . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
WPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
wakeup sources . . . . . . . . . . . . . . . . . . . . . . . . . . 36
settings
accessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ambient display . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
camera photos . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
camera videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
do not disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
general sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
home screen wallpaper . . . . . . . . . . . . . . . . . . . . . 48
limit sounds and vibrations . . . . . . . . . . . . . . . . . . 51

193
www.zebra.com