Scribd
Upload
9 views

03 Line Coding

This document discusses line coding techniques used in digital telecommunication networks. It begins by defining line coding as converting a string of 1s and 0s into a sequence of signals. Several line coding schemes are then described in detail, including unipolar, polar, return-to-zero, biphase, bipolar, and multilevel techniques. For each scheme, the document explains how data bits are mapped to signal elements and considerations for choosing coding schemes such as bandwidth, synchronization, error detection and complexity. Examples and illustrations are provided to compare different line coding formats.

Uploaded by

Haftamu Hiluf
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

03 Line Coding

This document discusses line coding techniques used in digital telecommunication networks. It begins by defining line coding as converting a string of 1s and 0s into a sequence of signals. Several line coding schemes are then described in detail, including unipolar, polar, return-to-zero, biphase, bipolar, and multilevel techniques. For each scheme, the document explains how data bits are mapped to signal elements and considerations for choosing coding schemes such as bandwidth, synchronization, error detection and complexity. Examples and illustrations are provided to compare different line coding formats.

Uploaded by

Haftamu Hiluf
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 31

Telecommunication Networks (ECEg-5311)

Chapter Two – Lecture 2


Digital Telecommunication Transmission Principles
Outline
▪ Introduction
▪ Digital Representation of Information
▪ Digital Processing of Analog Signals
▪ Line Coding
▪ Channel Capacity
▪ Digital Modulation Techniques
▪ Digital Hierarchy Technologies

2
Line Coding

▪ Converting a string of 1’s and 0’s (digital data) into a sequence


of signals that denote the 1’s and 0’s.
▪ For example, a high voltage level (+) could represent a “1” and
a low voltage level (0 or -) could represent a “0”.

Fig. Line coding and decoding


3
Line Coding …

▪ A data symbol (or element) can consist of a number of data


bits:
✓ 1 , 0 or
✓ 11, 10, 01, ……
▪ A data symbol can be coded into a single signal element or
multiple signal elements
✓ 1 -> +V, 0 -> -V
✓ 1 -> +V and -V, 0 -> -V and +V
▪ The ratio ‘r’ is the number of data elements carried by a signal
element.
4
Line Coding …

▪ The data rate defines the number of bits sent per sec [bps].
▪ It is often referred as the bit rate.
▪ The signal rate is the number of signal elements sent in a
second and is measured in bauds.
▪ It is also referred to as the modulation rate.
▪ Goal is to increase the data rate whilst reducing the baud rate.

5
Line Coding …

Fig. Signal element versus data element


6
Line Coding ...

Data rate and Baud rate:


▪ The baud or signal rate can be expressed as:
S = c* N
r
where
c : is the case factor
N : is the data rate
r : is the ratio of data element to signal element

7
Line Coding …

Considerations for choosing a good signal element:


▪ DC components - when the voltage level remains constant for
long periods of time, there is an increase in the low frequencies
of the signal. Most channels are bandpass and may not support
the low frequencies. This will require the removal of the dc
component of a transmitted signal.
▪ Self synchronization - the clocks at the sender and the receiver
must have the same bit interval. If the receiver clock is faster
or slower it will misinterpret the incoming bit stream.

8
Line Coding …

Fig. Effect of lack of synchronization

9
Line Coding …
Considerations for choosing a good signal element:
▪ Error detection capability - errors occur during transmission
due to line impairments. Some codes are constructed such that
when an error occurs it can be detected.
▪ Immunity to noise and interference - there are line encoding
techniques that make the transmitted signal “immune” to noise
and interference. This means that the signal cannot be
corrupted, it is stronger than error detection.
▪ Complexity - the more robust and resilient the code, the more
complex it is to implement and the price is often paid in baud
rate or required bandwidth.
10
Line Coding Schemes

Fig. Line coding schemes

11
Line Coding Schemes…

Unipolar:
▪ All signal levels are on one side of the time axis - either above
or below
▪ NRZ - Non Return to Zero scheme is an example of this code.
The signal level does not return to zero during a symbol
transmission.
▪ Scheme is prone to DC components.
▪ It has no synchronization or any error detection. It is simple
but costly in power consumption.

12
Line Coding Schemes…..

Fig. Unipolar NRZ scheme

13
Line Coding Schemes…..

Polar – NRZ:
▪ The voltages are on both sides of the time axis.
▪ Polar NRZ scheme can be implemented with two voltages.
E.g. +V for 1 and -V for 0.
▪ There are two versions:
✓ NRZ - Level (NRZ-L) - positive voltage for one symbol
and negative for the other.
✓ NRZ - Inversion (NRZ-I) - the change or lack of change in
polarity determines the value of a symbol.
E.g. a “1” symbol inverts the polarity a “0” does not.
14
Line Coding Schemes…..

▪ In NRZ-L the level of the voltage determines the value of the bit.
▪ In NRZ-I the inversion or the lack of inversion determines the
value of the bit.
▪ NRZ-L and NRZ-I both have an average signal rate of N/2 Bd.

Fig. Polar NRZ-L and NRZ-I schemes


15
Line Coding Schemes…..
Polar – RZ:
▪ The Return to Zero (RZ) scheme uses three voltage values. +ve,
0 and -ve.
▪ Each symbol has a transition in the middle. Either from high to
zero or from low to zero.
▪ This scheme has more signal transitions (two per symbol) and
therefore requires a wider bandwidth.
▪ No DC components or baseline wandering.
▪ Self synchronization - transition indicates symbol value.
▪ More complex as it uses three voltage level. It has no error
detection capability.
16
Line Coding Schemes…..

Fig. Polar RZ scheme

17
Line Coding Schemes…..
Polar – Biphase (Manchester and Differential Manchester):
▪ Manchester coding consists of combining the NRZ-L and RZ
schemes.
✓ Every symbol has a level transition in the middle: from high
to low or low to high. Uses only two voltage levels.
▪ Differential Manchester coding consists of combining the NRZ-I
and RZ schemes.
✓ Every symbol has a level transition in the middle. But the
level at the beginning of the symbol is determined by the
symbol value. One symbol causes a level change the other
does not.
18
Line Coding Schemes…..

Fig. Polar biphase (Manchester and differential Manchester schemes)

19
Line Coding Schemes…..

Polar – Biphase (Manchester and Differential Manchester):


▪ In Manchester and differential Manchester encoding, the
transition at the middle of the bit is used for synchronization.
▪ The minimum bandwidth of Manchester and differential
Manchester is 2 times that of NRZ.
▪ The is no DC component and no baseline wandering.
▪ None of these codes has error detection.

20
Line Coding Schemes…..

Bipolar - AMI and Pseudoternary:


▪ Code uses 3 voltage levels: +ve, 0, -ve, to represent the symbols
(Note: no transitions to zero as in RZ).
▪ Voltage level for one symbol is at “0” and the other alternates
between +ve & -ve.
▪ Bipolar Alternate Mark Inversion (AMI) - the “0” symbol is
represented by zero voltage and the “1” symbol alternates
between +V and –V.
▪ Pseudoternary is the reverse of AMI.

21
Line Coding Schemes…..

Fig. Bipolar schemes: AMI and Pseudoternary

22
Line Coding Schemes…

Bipolar - AMI and Pseudoternary:


▪ It is a better alternative to NRZ.
▪ Has no DC component or baseline wandering.
▪ Has no self synchronization because long runs of “0”s results in
no signal transitions.
▪ No error detection.

23
Line Coding Schemes…..

Multilevel Schemes:
▪ In these schemes we increase the number of data bits per symbol
thereby increasing the bit rate.
▪ Since we are dealing with binary data, we only have 2 types of
data element a 1 or a 0.
▪ We can combine the 2 data elements into a pattern of “m”
elements to create “2m” symbols.
▪ If we have L signal levels, we can use “n” signal elements to
create Ln signal elements.

24
Line Coding Schemes…..

Multilevel Schemes:
▪ Now we have 2m symbols and Ln signals.
▪ If 2m > Ln then we cannot represent the data elements, we don’t
have enough signals.
▪ If 2m = Ln then we have an exact mapping of one symbol on one
signal.
▪ If 2m < Ln then we have more signals than symbols and we can
choose the signals that are more distinct to represent the symbols
and therefore have better noise immunity and error detection as
some signals are not valid.

25
Line Coding Schemes…..

Fig. Multilevel: 2B1Q scheme

26
Line Coding Schemes…..

Fig. Multilevel: 8B6T scheme

27
Line Coding Schemes…..

Fig. Multitransition: MLT-3 scheme

28
Line Coding Cont’d…..

Table. Summary of line coding schemes

29
Example:

Consider the binary sequence 0100101. Draw the waveforms


for the following line coding formats.

a. Unipolar NRZ

b. Bipolar RZ

c. AMI RZ

30
Solution:

31

You might also like