01-03 Cloud-Based Management Configuration Commands
01-03 Cloud-Based Management Configuration Commands
Format
ap-mode-switch cloud cloud-configuration config-file-name
Parameters
Parameter Description Value
Views
System view
Default Level
3: Management level
Usage Guidelines
Usage Scenario
Scenario 1: Using the CLI to perform deployment configurations for an AP. For a
Fit AP, you can run this command to switch it to a cloud AP and complete its
deployment configurations, without the need to manually perform AP deployment
configurations after it switches to a cloud AP.
Scenario 2: Using a mobile app to perform deployment configurations for an AP. A
configuration file is generated based on configurations you perform on the app.
Use a STA with the mobile app installed to associate with the AP's management
SSID and log in to the AP. Upload the configuration file and deliver the ap-mode-
switch cloud cloud-configuration command to the AP. After the AP restarts, it
loads the configuration file and switches to a cloud AP.
Example
# Switch a Fit AP to a cloud AP and specify a configuration file for its startup.
<Huawei> system-view
[Huawei] ap-mode-switch cloud cloud-configuration vrpcfg_cloud.cfg
Info: Succeeded in setting the configuration for booting system.
Warning: The system will reboot and start in cloud mode of V200R010C00. Continue? (y/n)[n]:y
Info: system is rebooting ,please wait...
Related Topics
2.6.1 ap-mode-switch
Function
The cloud-mng register-center disable command disables the device from
proactively querying the registration center.
The undo cloud-mng register-center disable command enables the device to
proactively query the registration center.
By default, the device proactively sends query packets to the registration center.
Format
cloud-mng register-center disable
undo cloud-mng register-center disable
Parameters
None
Views
System view
Default Level
3: Management level
Usage Guidelines
In cloud mode, the device sends query packets to the registration center to obtain
plug-and-play information such as the IP address and port number of the Agile
Controller-Campus. If the plug-and-play function through the registration center is
not needed, run the cloud-mng register-center disable command.
Example
# Disable the device from proactively querying the registration center.
<Huawei> system-view
[Huawei] cloud-mng register-center disable
Format
display cloud-mng register-center status
Parameters
None
Views
All views
Default Level
2: Configuration level
Usage Guidelines
You can run this command to view the address, port, and status of the registration
center.
Example
# Display the status of the registration center in the user view.
------------------------------------------------------------------