250kw Perkins Catalogo.

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

PLANTA MARANIK MPS250

Perkins Serie E88TAG3

250 kWe
The most important thing for us is that our teams The generator is a three-phase alternating current
provide support and confidence for the continuous generator (can be connected as bifasic),
supply of electrical power when needed, either in the manufactured by Stamford, built according to
event of a failure in the commercial grid (emergency NEMA standards, with Class H insulation for humid
use) or in the need to generate power without relying on environments, marine environments, and corrosive
the commercial grid (continuous use). In our power conditions. It is suitable for minimal maintenance as
plants, we use engines and generators from the best it does not have slip rings, commutators, or
brands in the market, which also have the support of brushes, and its regulation is completely static
over 10 years in spare parts to ensure that preventive without parts subject to friction.
and corrective maintenance is carried out with original
factory parts. The power plant can be supplied open or with a
soundproof enclosure to reduce the noise emitted
Our equipment is fitted with Perkins or Cummins by the equipment.
engines and Stamford generators, connected through
flexible steel discs to form a single unit, ensuring proper If you require any special accessories or
alignment. It is mounted on a steel base that integrates enhancements, please consult directly with an
the fuel tank with a minimum backup of 8 hours of advisor to provide you with the best alternative.
continuous operation.

There are dampers between the engine-generator and DESCRIPTION SPECIFICATION


the base to reduce vibrations generated by the Engine Model Perkins E88TAG3
equipment. Generator Model Stamford / Emesa
Continuos Emergency 250 kWe / 313 kVA
The engine is an internal combustion Diesel engine with Prime Power 225 kWe / 281 kVA
6 vertical cylinders, turbocharged, model E88TAG3, Fuel Consumption 70 Liters/hour
manufactured by Perkins Engines Company Limited, a Frequency 1800 rpm
subsidiary of Caterpillar Inc.
Number of cylinders 6 Vertical in-line
Bore and Stroke 112 x 149 mm
Aspiration Type Turbocharged
Lubrication Capacity 41 Liters
Coolant Capacity 57 Liters
Tank Capacity 500 Liters
Frequency 1800 rpm
Voltage 220V
Phases 3

mportant note: Starting at 300 meters above sea level, this equipment will
lose 1% of its capacity for every additional 300 meters at a temperature of
30°C. See the derating table for reference.
TYPE DESCRIPTION SPECIFICATION
Length (L) 2600 mm
Width (W) 1250 mm
Open
Height (H) 1900 mm
Weight 1850
Length (L) 3600 mm
Width (W) 1250 mm
Closed
Height (H) 2200 mm
Weight 2300

Accessories included in our equipment are:

• 2 Heavy-duty 12V service batteries.


• Flexible tube with clamps.
• Hospital-type silencer.
The plant is equipped with a microprocessor from the • Maintenance manual.
Deepsea brand for the protection of the engine- • Transfer unit (for automatic equipment).
generator and monitoring of parameters from the • Integrated fuel tank.
commercial grid. The control module operates • Generator foot switch.
automatically upon detecting a fault or absence in the
commercial grid; it starts the engine, and when the The warranty is for 12 months or 1000 operating hours,
parameters stabilize, which on average takes 12 whichever occurs first. We also offer warranty
seconds (voltage, frequency, temperature, and oil extensions.
pressure), the transfer is activated to supply power Equipment can be manufactured with an integrated
from the generator to the load. When the commercial double-walled tank with a capacity of up to 24 hours.
grid returns, the control signals for transferring the load Soundproof enclosures can be manufactured as
back to the commercial grid. integrated units to form a single piece with different
levels of attenuation (78 dB at 7 meters as standard).
We have different control modules depending on the
application, whether it be manual, automatic, open
transition, or closed transition.

MANUFACTURAS MARANIK S DE RL DE CV
R.F.C. MMA150422UQ6.
ARABELLA 31 MIGUEL HIDALGO TLAHUAC
Tel 55 70 29 48 28 / 55 70 26 39 28
www,grupomaranik.com.mx
[email protected]

You might also like