Type4 Checker

Software instructions
Table of contents
Table of contents ................................................................................... 2
1. Outline....................................................................................... 3
2. About connection to checker ..................................................................... 3
3. Setup COM port ............................................................................... 3
4. Change language ............................................................................... 4
5. Service Checker Type4 instructions ................................................................ 5
5.1 Function selection ........................................................................... 5
5.2 Record function ............................................................................. 6
5.2.1 Customer selection ..................................................................... 6
5.2.2 Network map selection.................................................................. 7
5.2.3 Network map ......................................................................... 8
5.2.4 Instructions of icons .................................................................... 9
5.2.5 Mode/function matrix ................................................................. 10
5.2.6 Centralized operation screen ............................................................ 11
5.2.7 Operation data display screen ........................................................... 12
5.2.8 Number of Units Display screen .......................................................... 13
5.2.9 Periodic recording setting screen ......................................................... 14
5.3 Play function .............................................................................. 15
5.3.1 Customer, data selection screen .......................................................... 15
5.3.2 Operation data display ................................................................. 16
5.3.3 CSV file output setting screen............................................................ 17

2 / 17
1. Outline
This application supports below types of diagnosis.
Type4 checker(D3)

2. About connection to checker

USB is used for connection with checker.

3. Setup COM port

① Click “Setting-Port”

②
③
④

② Select COM port and press OK button.

③ COM port detail is displayed.
④ In case of Bluetooth COM port, module name is displayed.
*Module name might not be displayed based on OS version or Bluetooth module model.

3 / 17
4. Change language

① Click “Setting-Language” and select language.

*New setting will be effective after restart of software.

4 / 17
5. Service Checker Type4 instructions
5.1 Function selection

①
②
③

① Record:
Records operation data and shows real time data
② Play:
Shows data recorded by “Periodic recording”
③ Customer data:
Manages information of customer
Please refer to “5.2.1 Customer selection” and “5.2.2 Network map
selection” for how to use

5 / 17
5.2 Record function
5.2.1 Customer selection

①
②
③
④
⑤
⑥

⑦
① Select customer
② Confirm customer selection and move to Network map selection screen
③ Add a new customer
④ Edit customer information
⑤ Delete customer
⑥ Move to Network map screen without selecting customer
⑦ Move back to previous screen

6 / 17
 5.2.2 Network map selection

① ②
③
④
⑤

① Select the map

② Confirm the map to display and move to Network map screen
③ Make a new map with D3-net communication
④ Edit map name
⑤ Delete map
⑥ Move back to previous screen

7 / 17
 5.2.3 Network map
DIII-NET status is displayed.

③
②
⑤ ④

① Units are shown in icon style.

(see Instructions of icons for details)
② Switch (move) between systems.
③ Change function mode.
④
will differ.
(see Mode/function matrix for details)
⑤ Go back to previous screen.

8 / 17
 5.2.4 Instructions of icons

Outdoor unit Indoor unit Chiller

Unknown
model

Stop

Running

Error

Comm. Error

9 / 17
 5.2.5 Mode/function matrix

Mode Button Details

Centralized
Map mode Move to Centralized operation screen
operation

Update map Update units on network map

Display Disp. op data Move to Operation data display screen

mode Disp. Q’ty Move to Number of units

Record Period. rec set Move to Period. rec set

mode Period. rec start Start recording operation data.

(data stored to smartphone/tablet)

SD rec start Start recording operation data.

(data stored to checker SD card,

recording continues after disconnection

with the smartphone/tablet)

10 / 17
5.2.6 Centralized operation screen
Executes centralized control of connected units.

②
③
① Select desired indoor unit.
② Shows status of selected unit (on/off, mode, setpoint) and change settings
③ Go back to previous screen.

11 / 17
5.2.7 Operation data display screen
Shows current operation data.
(only possible to show data while connected)
See ”Play” function>Operation data display screen for details

12 / 17
5.2.8 Number of Units Display screen
Number of connected units is displayed.

13 / 17
5.2.9 Periodic recording setting screen
Setup “Periodic recording”

① ②

④ ⑤
① Setup date interval from 5 – 600 seconds.
② Select record stop option from manual or auto.
If Auto, specify duration of record in minute basis.
③ Check the system to be recorded.
④ Save settings and move back to previous screen.
⑤ Cancel setting and move back to previous screen.

14 / 17
5.3 Play function
5.3.1 Customer, data selection screen
Lists up “periodic record” data stored in smartphone (tablet)

① ②
③
④

① Select recoded data

② Move to Operation data display
③ Move to CSV output setting screen
④ Delete selected
⑤ Move back to previous screen

15 / 17
 5.3.2 Operation data display
Display recorded operation data.

④ ⑦
⑧ ⑤ ⑥

① Select data items, show data values on updated time (cursor), show/hide on
graph by click action.
② Show selected data by the list in line chart.
③ Show on/off status of selected data in bar chart.
④ Widen [<-->], narrow [>--<], move cursor [<-] [->].
⑤ Move cursor (one click= time interval of record).
⑥ Select unit to be shown on the graph.
⑦ Search max/min value of selected data.
⑧ Move back to previous screen.

16 / 17
5.3.3 CSV file output setting screen
Export recoded data to csv file.
Data will be split into system basis.

③ ④
① Specify output data time period
② Select header information to be exported or not
③ Execute export
④ Cancel export and move back to previous screen

17 / 17