6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Home / I'm Learning / India_Internship_KLUniversity_Introduction to Packet Tracer / Packet Tracer Basics Quiz / Introduction to Packet Tracer - PT Basics Quiz


Course India_Internship_KLUniversity_Introduction to Packet Tracer
Home

Started on Tuesday, 20 June 2023, 7:33 PM

 State Finished
Grades
Completed on Tuesday, 20 June 2023, 7:36 PM
Time taken 2 mins 39 secs
 Marks 7.33/28.00
Messages
Grade 26.19 out of 100.00


Calendar

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 1/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 1 A PC and two laptops need to be added to a wireless router on the Packet Tracer network. What icon would provide the correct components?
Incorrect
Select one:
Mark 0.00 out of

2.00

Refer to curriculum topic: 2.1.1

The correct answer is:

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 2/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 3/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 2 Which icon is the default icon for a .pka file?

Incorrect
Select one:
Mark 0.00 out of
2.00

Refer to curriculum topic: 4.2.1

The correct answer is:

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 4/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 3

Incorrect

Mark 0.00 out of

2.00

Refer to the exhibit. What description matches the function of the Packet Tracer devices shown?

Select one:
security devices

IoT devices

networking devices 

cabling components

Refer to curriculum topic: 2.1.1

The correct answer is: IoT devices

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 5/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 4 Add a PC and connect it to the wireless router with a straight-through cable. What icon should be selected to find the required cable?
Complete
Select one:
Not graded

Refer to curriculum topic: 2.1.1

The correct answer is:

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 6/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 5 Where in Packet Tracer can you create a new building or wiring closet?
Incorrect
Select one:
Mark 0.00 out of
2.00 virtual workspace

logical workspace 

simulation workspace

physical workspace

Refer to curriculum topic: 4.1.1

The correct answer is: physical workspace

Question 6

Correct

Mark 2.00 out of

2.00

Refer to the exhibit. The above icon is in the lower right hand corner of the Packet Tracer screen. What might the person using Packet Tracer be doing?

Select one:
adding a city view as a background

testing connectivity by using simple or complex PDUs 

creating a new network

deleting components from an existing network

Refer to curriculum topic: 2.1.1

The two modes available in Packet Tracer are realtime mode and simulation mode. Simulation mode allows for the creation and capture of PDUs on the network.
The correct answer is: testing connectivity by using simple or complex PDUs

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 7/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 7 Using the Packet Tracer network, add and associate a laptop as a device on the wireless router. Use HTTP to connect to www.cisco.com. What is the special message?
Incorrect
Select one:
Mark 0.00 out of
2.00 You made it!

Your wireless configuration works.

Way to go!

Awesome! 

Packet Tracer is cool!

Refer to curriculum topic: 2.1.1

The correct answer is: Way to go!

Question 8 A technician needs to add a home wireless router. Which icon should the technician select?
Correct
Select one:
Mark 2.00 out of
2.00

Refer to curriculum topic: 2.1.1

The network devices icon in the bottom left corner of the Cisco Packet Tracer window allows a router, switch, hub, wireless device, security, or WAN emulation to be
added to the logical workspace.

The correct answer is:

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 8/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 9 Send a simple PDU from the new PC to the server.

Correct True or False?
The ping will work on the newly added PC as soon as the link lights turn green.
Mark 2.00 out of
2.00
Select one:
true

false 

Refer to curriculum topic: 3.1.1

The wireless router is providing the IP addresses via DHCP. The PC must be configured with DHCP before communications to the server will work.
The correct answer is: false

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 9/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 10

Incorrect

Mark 0.00 out of

2.00

A technician selected the GUI interface on a wireless router and added a DNS address of 208.67.220.220. The technician then immediately exited the GUI interface.
What will occur as a result of this configuration?

Select one:
All connected host devices, configured with DHCP, will automatically be sent the IP address of the DNS server. 

Because the technician forgot to save the configuration, the DNS server address will not be sent to connected devices.

The technician should have used the Config tab to enter the DNS address.

The technician should check the Physical tab to ensure that the wireless router is powered on.

Refer to curriculum topic: 2.1.1

When working with a wireless device within the Packet Tracer GUI environment, scroll to the bottom and select the Save Settings option for each menu item.
The correct answer is: Because the technician forgot to save the configuration, the DNS server address will not be sent to connected devices.

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 10/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 11 Switch to simulation mode. Select Laptop0/Desktop/HTTP, enter a URL of www.cisco.com and click GO. What is the value of the Destination Port number on the
Incorrect outbound DNS packet that was created?

Mark 0.00 out of

Select one:
2.00
1025

800 

57

53

Refer to curriculum topic: 3.1.1

The correct answer is: 53

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 11/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 12

Incorrect

Mark 0.00 out of

2.00

Refer to the exhibit. How do you display the interface number where the cable is attached to a device?

Select one:
The labels must always be manually entered.

On the config tab of the device, choose show interface number.

Enter the no shutdown command in interface configuration mode. 

Hover the mouse cursor over the cable.

Refer to curriculum topic: 2.1.1

When working within Packet Tracer, hover the mouse cursor over the cable close to where it connects to a device to see the specific interface number. Hover over the
device to see interface information such as IP address and link status.
The correct answer is: Hover the mouse cursor over the cable.

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 12/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 13

Incorrect

Mark 0.00 out of

2.00

Refer to the exhibit. How do you display the popup window to show the additional device information?

Select one:
Choose File > device info popup 

Hover the cursor over the device icon.

Right-click the device to select detailed information.

Double-click the device icon.

Refer to curriculum topic: 2.1.1

By hovering over a Packet Tracer device, information such as interface status and IP address displays.
The correct answer is: Hover the cursor over the device icon.

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 13/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 14

Partially correct

Mark 1.33 out of

2.00

Refer to the exhibit. Match each numbered Packet Tracer menu icon with a description. (Not all options are used.)

icon 4 Investigate device tables. 

icon 3 Enter simulation mode. 

icon 2 Delete a component. 

icon 5 Add a note. 

icon 1 Investigate device tables. 

icon 6 Add a PC to the network. 

The correct answer is: icon 4 → Investigate device tables., icon 3 → Enter simulation mode., icon 2 → Delete a component., icon 5 → Add a note., icon 1 → Create a
complex PDU., icon 6 → Select a city view as a background.

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 14/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

Question 15

Incorrect

Mark 0.00 out of

2.00

Refer to the exhibit. What does the shaded area represent?

Select one:
It defines the wireless signal coverage.

It is just a background image. 

It is used as a temporary location to add devices that will be moved into the building.

It defines an area where you cannot add any new buildings.

Refer to curriculum topic: 4.1.1

Packet Tracer has two views: (1) the logical view which is the default view and used for creating the network and (2) the physical view which allows you to see wiring
closets, a room or building layout, or wireless coverage for a specific wireless router.
The correct answer is: It defines the wireless signal coverage.

Read Chapter 5: IoT Components in Packet

◄ Read Chapter 4: Packet Tracer Usage Jump to...
Tracer ►

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 15/16
6/20/23, 7:36 PM Introduction to Packet Tracer - PT Basics Quiz: Attempt review

NetAcad, a Cisco Corporate Social Responsibility program, is an IT skills and career building program available to learning institutions and individuals worldwide.

Terms and Conditions Privacy Statement Cookie Policy Data Protection Trademarks Data Protection Accessibility

https://lms.netacad.com/mod/quiz/review.php?attempt=56342614&cmid=73992904 16/16