00055210020-Basic Equipment From Model Year 2000

Service
Workshop Manual
Audi A1 2011 ➤ , Audi A3 2004 ➤ ,
Audi A4 2008 ➤ , Audi A4 2015 ➤ ,
Audi A5 Cabriolet 2009 ➤ ,
Audi A5 Coupé 2008 ➤ , Audi A6 2011 ➤ ,
Audi A8 2010 ➤ , Audi Q3 2012 ➤ ,
Audi Q5 2008 ➤ , Audi Q7 2007 ➤ ,
Audi Q7 2016 ➤ , Audi R8 2007 ➤ ,
Audi TT 2007 ➤
Specifications for testing the braking force (according
to German legislation)
Edition 07.2016
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Service Department. Technical Information

Service
List of Workshop Manual Repair Groups
Repair Group
00 - Technical data
Technical information should always be available to the foremen and mechanics, because their
careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and
safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a
matter of course, be observed.
All rights reserved.

No reproduction without prior agreement from publisher.
Copyright © 2016 Audi AG, Ingolstadt D4B804EA6B2

Audi A1 2011 ➤ , Audi A3 2004 ➤ , Audi A4 2008 ➤ , Audi A4 2015 ➤ , Au ...
Specifications for testing the braking force (according to German legislation) - Edition 07.2016
Contents
00 - Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1 Testing the braking force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 Legal requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Specifications for testing the braking force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Contents i
ii Contents
00 – Technical data
1 Testing the braking force
(ARL004872; Edition 07.2016)
⇒ “1.1 Legal requirements”, page 1
⇒ “1.2 Specifications for testing the braking force”, page 1
1.1 Legal requirements

With the modifications to EU regulations on the monitoring of the
roadworthiness of motor vehicles (EU Directives 2009/40/EC and
2010/48/EU), it became necessary to adapt §29 of the German
Road Traffic Permit Act (StVZO) on the inspection of motor vehi‐
cles and their trailers (general inspection). According to the 47th
Variations Regulation, from 1/8/2012 onwards new inspection
specifications apply amongst other things for testing the foot
brake of EU class M1 vehicles (passenger cars with up to 9 seats)
with an initial registration date of 28/7/2011 and later.
M1 class vehicles are vehicles used for the carriage of passen‐
gers with a maximum of 9 seats (incl. the driver's seat), collo‐
quially termed passenger cars and caravans.
The test method and specifications are implemented in the soft‐
ware for the brake test equipment.
1.2 Specifications for testing the braking

force
Note
♦ In Germany, the braking force test is carried out as part of the

general inspection (§29 of the German StVZO) by a testing
organisation authorised in the Federal Republic of Germany
on brake test equipment suitable for this purpose.
♦ The brake test equipment must meet certain requirements.
For more details, please contact the brake test equipment's
manufacturer directly.
♦ All brake test equipment approved by AUDI AG meets these
requirements.
The specifications apply for all model and engine versions of the
individual vehicle types.
Model Type Specifications according to §29 of StVZO
FPED- FPED FPED ProtectedFbymin.,
copyright.FCopying
min.,for private or commercial purposes, in part or in whole, is not
MAX [N] [N] be‐ front rear
low axle [%] axle [%]

[N] above
Audi A1 8X 160 48 145 55 16
Audi A3 8P 200 45 156 51 18
Audi A3 8V 158 46 127 56 16
Audi A4 8E 206 37 279 57 16
Audi A4 8K 147 44 221 50 22
Audi A4 8KH 151 44 221 50 22
allroad
Audi A4 8W 166 44 219 52 18
1. Testing the braking force 1

Model Type Specifications according to §29 of StVZO

FPED- FPED FPED F min., F min.,
MAX [N] [N] be‐ front rear
[N] above low axle [%] axle [%]
Audi A4 8W 171 44 219 52 18
allroad
Audi A5 8T 147 44 221 50 18
Coupé
Audi A5 8F 147 44 221 50 22
Cabrio‐
let
Audi A6 4F 154 44 221 52 19
Audi A6 4G 154 44 221 52 19
Audi A7 4G 154 44 221 52 19
Audi A8 4E 193 44 186 50 19
Audi A8 4H 151 44 221 52 19
Audi TT 8J 141 47 129 57 15
Audi TT FV 126 46 127 56 16
Audi R8 42 137 56 261 38 32
Audi R8 4S 138 53 248 40 30
II
Audi R8 42 B 102 53 266 40 30
e-tron
Audi GA 176 46 155 53 16
Q2
Audi 8U 176 45 178 53 16
Q3
Audi 8R 164 44 221 50 20
Q5
Audi FY 175 44 219 52 19
Q5 II
Audi 4L 200 34 206 48 20
Q7
Audi 4M 163 38 181 52 19
Q7
The specifications apply for all model and engine versions of the
individual vehicle types.
2 Rep. gr.00 - Technical data

00055210020-Basic Equipment From Model Year 2000

Uploaded by

Copyright:

Available Formats

00055210020-Basic Equipment From Model Year 2000

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

00055210020-Basic Equipment From Model Year 2000

Uploaded by

Copyright:

Available Formats

Service

Service Department. Technical Information

All rights reserved.

Copyright © 2016 Audi AG, Ingolstadt D4B804EA6B2

1.1 Legal requirements

1.2 Specifications for testing the braking

♦ In Germany, the braking force test is carried out as part of the

low axle [%] axle [%]

1. Testing the braking force 1

Model Type Specifications according to §29 of StVZO

2 Rep. gr.00 - Technical data

You might also like