Sysreq Win
Sysreq Win
This document describes the steps necessary to correctly install and configure all ANSYS, Inc. products
on Windows platforms for Release 2019 R2. These products include:
• ANSYS Discovery
– ANSYS AIM
– ANSYS SpaceClaim
– ANSYS Autodyn
– ANSYS LS-DYNA
– ANSYS Chemkin
– ANSYS Energico
– ANSYS EnSight
– ANSYS FENSAP-ICE
– ANSYS Forte
– ANSYS TurboGrid
• ANSYS Offshore
– ANSYS Aqwa
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 1
Installation Prerequisites for Windows
– ANSYS Additive
– ANSYS Viewer
– AutoCAD
– ACIS
– CATIA, Version 4
– CATIA, Version 5
– CATIA, Version 6
– Creo Parametric
– Inventor
– JTOpen
– NX
– Parasolid
– Solid Edge
– SOLIDWORKS
Note
ANSYS Workbench is installed by default as product components to most ANSYS, Inc. products.
ANSYS Workbench is not installed as part of the products under ANSYS Additional Tools, nor
with the CFD-Post only option. ANSYS Workbench includes the following applications:
• DesignModeler
• Design Exploration
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
2 of ANSYS, Inc. and its subsidiaries and affiliates.
• Meshing
• Fluent Meshing
• EKM Client
Caution
Because some of these applications can be run as standalone applications without ANSYS
Workbench, you will see some but not all of these listed separately as options when you
uninstall. In such cases, you will need to select those options in order to uninstall those
components.
Important Notice
If you want to run multiple releases of ANSYS, Inc. software, you MUST install them chronologically (for
example., Release 2019 R1 followed by Release 2019 R2). If you install an earlier release after installing
Release 2019 R2, you will encounter licensing issues that may prevent you from running any
products/releases. If you need to install an earlier release after you have already installed Release 2019
R2, you MUST uninstall Release 2019 R2, then re-install the releases in order.
• The ANSYS Additive product suite has been added to the ANSYS installation program.
• The ANSYS Extensibility product has been added to the ANSYS installation program.
• The ANSYS Distributed Compute Services product has been added to the ANSYS installation program.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 3
Installation Prerequisites for Windows
Note
For detailed and current support information, see the Platform Support section of the ANSYS Website.
Supported Products By Platform For a complete list of products supported by each platform, see
the Platform Support by Application PDF on the Platform Support section of the ANSYS Website.
Supported Platforms for High Performance Computing See the discussions on Configuring Distrib-
uted ANSYS and Configuring ANSYS CFX Parallel for detailed information on supported platforms for
distributed computing.
A = Mechanical APDL
W = ANSYS Workbench
I = ANSYS ICEM CFD (standalone and ANSYS Workbench Readers)
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
4 of ANSYS, Inc. and its subsidiaries and affiliates.
System Prerequisites
1. For ICEM CFD standalone, ACIS 18.0.1 is the supported version for all platforms.
Note
View the latest supported CAD packages at ansys.com> Solutions> Solutions by Role>
IT Professionals> Platform Support> CAD Support.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 5
Installation Prerequisites for Windows
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
6 of ANSYS, Inc. and its subsidiaries and affiliates.
Software Prerequisites
Product installations also require an additional 500 MB of free disk space during an installation.
Memory Requirements You must have a minimum of 8 GB of memory to run product installations;
16 or 32 GB of memory is recommended.
Note
If your computer does not have Microsoft .NET Framework 4.6.2 installed, the install-
ation program installs .NET 4.6.2 as a prerequisite and may require a system restart
after exiting the installation and before running any ANSYS products.
• Intel OpenCL runtimes when using the ANSYS Discovery AIM product
Note
If you selected the ANSYS Discovery AIM product during installation, the OpenCL
runtimes are included as part of the prerequisite installation.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 7
Installation Prerequisites for Windows
Prior to installing, you can find the executables for the software prerequisites in the root \prereq
directory of the media/download package.
• The machine(s) being used for the simulation must contain at least one NVIDIA GPU card. The following
cards are recommended:
• When using the sparse solver or eigensolvers based on the sparse solver (for example, Block Lanczos or
subspace), only NVIDIA GPU devices with significant double precision performance (FP64) are recommended
in order to achieve optimal performance. These include the following models:
• NVIDIA GPU devices with at least 12GB of on-card memory are recommended in order to achieve optimal
performance.
• For NVIDIA GPU cards, the driver version must be 412.16 or newer. For optimal performance on Windows,
the TCC (Tesla Compute Cluster) driver mode is recommended when using Tesla series GPU cards. Some
limitations exist when using this driver mode. Check your GPU card documentation for more details on how
to set this driver mode and the existing limitations.
• To utilize a NVIDIA GPU device that is not on the recommended list of cards, set the following environment
variable:
ANSGPU_OVERRIDE=1
This is most beneficial when you wish to run on newer NVIDIA GPUs that were not available at the
time of release of this version of the ANSYS program. If you choose to use this environment variable,
you should ensure that the NVIDIA GPU device that you wish to use is sufficiently powerful, in terms
of both double-precision compute power and on-card memory, to achieve meaningful acceleration
for your simulation. Using this environment variable with an underpowered CPU may actually decel-
erate your simulation.
Note
On Windows, the use of Remote Desktop may disable the use of a GPU device. Launching
Mechanical APDL through the ANSYS Remote Solve Manager (RSM) when RSM is installed
as a service may also disable the use of a GPU. In these two scenarios, the GPU accelerator
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
8 of ANSYS, Inc. and its subsidiaries and affiliates.
Additional Hardware and Software Requirements
capability cannot be used. Using the TCC (Tesla Compute Cluster) driver mode, if applicable,
can circumvent this restriction.
• 8 GB of RAM (Minimum)
• A current default web browser must be installed to view the ANSYS internet-based help documentation.
For a complete list of supported browsers, see the Browser Support PDF on the Platform Support
section of the ANSYS Website.
For a local copy of the product documentation on your system, download an installable version from
the ANSYS Download Center. Instructions for installing the Local Help are included with the download
package.
• Discrete graphics card with the latest drivers and compatible with the supported operating systems. For full
functionality, use of a recent NVIDIA Quadro or AMD FirePro card with at least 1 GB of discrete video memory
and supporting OpenGL version 4.5 or above. Intel Iris Pro Integrated graphics has also been used successfully.
For information on the most recently tested graphics cards, see the Graphics Cards TestedPDF on
the Platform Support section of the ANSYS Website.
For the ANSYS DiscoveryAIM product, see also ANSYS Discovery AIM Requirements (p. 10).
Note
• A minimum screen resolution of: 1024 x 768 (4:3 aspect ratio), 1366 x 768 (16:9 aspect ratio) or 1280 x 800
(16:10 aspect ratio) with minimum 24 bit color. A higher screen resolution such as 1920x1080 (16:9) or
1920x1200 (16:10) is strongly recommended for most applications.
Note
– Some combinations of graphics card type, operating system, and MPEG resolution fail
to play MPEGs properly. You may be able to get normal playback results simply by
changing the MPEG settings. Alternatively, you can upgrade your graphics card.
– Ultra High Definition (4K) Graphics Cards: Use of Ultra High Definition (4K) graphics
cards may cause a number of cosmetic display issues (including enlarged or reduced
text and incorrect positioning of option labels). These issues do not affect the function-
ality of the installation program.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 9
Installation Prerequisites for Windows
• If you use a 3Dconnexion product, ensure that you have the latest version of the drivers installed.
• Approximately twice as much swap space as memory. The amount of memory swap space on the system
may limit the size of the ANSYS model that can be created and/or solved.
• TCP/IP for the license manager (see the ANSYS Licensing Guide for more information on TCP/IP).
Although TCP/IP is included as part of the operating system, it may not be installed by default. When
TCP/IP is installed, it must be bound to a network adapter. On machines that are connected to an
internal network, TCP/IP must be bound to a network card such as an Ethernet adapter. The vast
majority of systems using TCP/IP will fall into this category. On machines that connect to the internet
or corporate intranet through a modem, TCP/IP can be bound to the Remote Access Service. Also,
the Autodial option of the Internet Options must be disabled so that the machine does not attempt
to connect to the Internet every time ANSYS is run. See the ANSYS Licensing Guide for more inform-
ation.
• Microsoft Internet Explorer (IE) 11 or greater is recommended for proper operation of ANSYS Workbench.
Once the correct version of IE is installed, it does not have to be your default Internet browser. After install-
ation, simply run your preferred browser and reestablish it as the default.
• PDF reader software is required to read the installation guides and other user documentation.
To access our help system videos, ANSYS recommends that you set Windows Media Player as your
default.
• Graphics driver installation for AMD, NVIDIA and Intel will either provide OpenCL by default or as an option.
• We recommend you additionally have installed INTEL or AMD CPU drivers, these can allow us to offload
more work to unused cores.
To use a 3Dconnexion product with the listed products, you must download and install the appropriate
Microsoft Windows driver for your version of Windows. Refer to http://www.3dconnexion.com for more
information on using Space products and to download the appropriate drivers.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
10 of ANSYS, Inc. and its subsidiaries and affiliates.
Third-Party Software and other Security Considerations
• Most of the other operations can be simulated by mapping Connexion functions to keyboard shortcuts
supported in ANSYS Discovery AIM. See for more information on AIM keyboard shortcuts.
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 11
Release 2019 R2 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
12 of ANSYS, Inc. and its subsidiaries and affiliates.