Scribd
Upload
7 views

Vibration Testing

Vibration testing is needed for modal testing to determine vibration parameters, verification of analytical models, and product reliability testing. Modal testing involves exciting a structure with an impulse hammer or vibration shaker and sensing the vibration response with sensors. Signal analysis techniques like Fourier transforms, correlation, and power spectral density are used to determine vibration parameters from the sensed signals, including natural frequencies, mode shapes, and modal damping. An example modal test is performed on an alloy wheel.

Uploaded by

mechmaster4u
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Vibration Testing

Vibration testing is needed for modal testing to determine vibration parameters, verification of analytical models, and product reliability testing. Modal testing involves exciting a structure with an impulse hammer or vibration shaker and sensing the vibration response with sensors. Signal analysis techniques like Fourier transforms, correlation, and power spectral density are used to determine vibration parameters from the sensed signals, including natural frequencies, mode shapes, and modal damping. An example modal test is performed on an alloy wheel.

Uploaded by

mechmaster4u
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Vibration Testing

2103-602: Measurement and Instrumentations

Why vibration testing needed?


• Modal testing to determine vibration parameters
such as natural frequencies, modal damping
and mode shapes
• Verification of analytical model
• Product reliability test, e.g., shock and vibration

• Machine condition monitoring


Modal testing diagram
Source of excitation Structure

Dynamic signal analyzer: display both


time and frequency responses and real time
calculation of Fourier transform.

Vibration sensor

Sensor senses and converts the motion into electrical signal.


Actuator
Need excitation with wide bandwidth of frequency
covering all interested modes and operating frequencies.

Impulse hammer Vibration shaker


Built-in
force sensor

provides impulsive force


to the tested structure provide harmonic, swept-sine,
or random excitation to the tested
structure

Signal Analysis

Basic concept:
- Fourier transform
- Correlation
- Power Spectral Density (PSD)
- FRF determined from input- and output-PSD
- Digital processing
Fourier series of periodic signals

Coefficients of Fourier series indicate the density of signal


at various discrete harmonic frequencies.

Fourier Transform
Real impulse signal
For any non-periodic signal,
Fourier transform indicates density
of the signal at various continuous
frequencies.

“Coefficients of continuous series of harmonics”


Correlation
Correlation indicates how fast the signal is changing
compared to itself (auto) or other signal (cross).

Auto-correlation

Cross-correlation
Power Spectral Density (PSD)
PSD is Fourier transform of the correlation.
Auto-PSD:

Cross-PSD:

PSD indicates the energy density of signal at


various frequencies and has a unit of power.
When subject to the uniform input at
various frequencies, what does the PSD of
vibration response, tell us about?

PSD or vibration energy at resonance


frequencies will be maximum.

FRF determined from PSD


Digital Signal Processing

Modal testing
Modal data extraction
• Natural frequencies: frequencies at peaks
• Modal damping: half-power method for 1-DOF
lightly damped system

Half power method can be applied to M-DOF lightly damped system whose
resonance frequencies are far apart.
Mode Shapes
Example

Modal Testing of Alloy Wheel


Test Result

FRF of Model 669L1 measured close to the hole

8 466

7 1088

6 901
Magnitude (g/lbf)

722
1

0
0 200 400 600 800 1000 1200 1400 1600

Frequency (Hz)

You might also like