DVB T&S

DVB T&S COMBO METER

COMBO METER
THE PROFESSIONAL EQUIPMENT

THE PROFESSIONAL EQUIPMENT

USER’S MANUAL
T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

CONTENTS Product Description

It is a battery powered hand held Satellite adjustment meter demodulating
Product Description DVB-S and DVB-T Signal. It's veryconvenient for installer to catch the
signal quickly andaccurately and adjust the antenna to the best position.
1.Guide 2 It's with microprocessor controller, reliable and stable performance.
1.1 Face Panel & Button 3 When it's turned on, channel picture, Signal Strength and Signal
1.2 Power On/Off 4 Quality can be showed on LCD Screen a fter you set up your local
DVB-S or DVB-T Parameter. Also, it enables you to select large
1.3Power Supply & Battery 4 menu window for data figure which is helpful for adjustment.
2. Menu 4 It shows Azimuth and Elevation, CBER/VBER, Singal Quality, Signal
Strength and signal lock sound forDVB-S, And for DVB-T channel
2.1 DVB-S 5
picture, Signal Strength and Signal Quality can be showed on LCD
2.1.1 Quick Search 5 Screen after you set up your local DVB-T Parameter. Also, it can at most
2.1.2 Satellite Install 9 show five channels' signal at the same menu which is very helpful
2.2 DVB-T 11 for adjustment.
For DVB-S it can detect very faint signal, and supports antenna power
2.2.1 Quick Search 12
OFF/13V/18V selectable and it's with auto-protection for LNB short-
2.2.2 Satellite Install 15 circuit.
2.3 Multimedia 16 For DVB-T it can detect very faint signal, and supports antenna power
2.4 System Setup 18 OFF/5V/12V/15V/18V/24V selectable and it's with auto-protection
for antenna short-circuit.
2.5 Shortcut Buttons 20
It includes both AV IN and AV OUT for Camera, monitor…etc
3.Specifications 23 It's used with 12V Power Adaptor when you need to use
4.Warnings 24 external power.
It includes high capacity Lithium Battery 8.4V 3000mAh
5.Product Standard Package 26
which works for more than 4 hours after it's fully charged.

Digita Satellite Meter | 1

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

1.GUIDE NO. Name Function

1 MENU To show main menu or return to previous menu
1.1Face Panel & Button 2 F1 Function Button
3 F2 Function Button
4 F3 Function Button
5 F4 Function Button
6 EXIT To cancel se lection or exit from current menu
7 ▲▼ OK Arrow for Cursor Moving
OK for Confirming
8 Mute S ound On/Off Switching
9 SCAN Quick search for DVB-S
10 M.INFO S how 5 channe ls signal information for DVB-T
11 TV/Radio S witch between TV Channel and Radio Channel
12 B.Light For LCD Screen on or off switching
13 +/- To turn on or off the sound for signal quality
14 INFO S how information of curr ent program
15 Antenna IN Connecting to the antenna for DVB-T
16 Power Switch P ower Switch for machine power
17 USB P ort P ort for Upgrading or connecting to multimedia
18 LNB IN Connecting to the dish for DVB-S
19 Power Connection port P ort for power charging
20 Power Indicator Light The light is on when meter is turned on
21 22K Switch Indicator Light 22K Switch is on when it lights
22 13/18V Indicator Light To show H/V switch output
23 Signal Lock Indicator Light Locked signal when it lights
24 Charging Indicator Light The light is on when it’s charging and
off when charging is completed.
25 0-9 Numerical Button To input numer for setting par ameters
26 LCD Screen S how menu and TV program…etc
z

2 | Digita Satellite Meter Digita Satellite Meter | 3

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

use Arrow key to move cursor, and then press “OK” key to
1.2 Power On/Off
select sub-menu.
To turn on the meter when Power Switch moves to I
position. 2.1 DVB-S
To turn off the meter when Power Switch moves to 0 select DVB-S and press OK to enter DVB-S system
position.
Please turn off the meter to charge the meter in time
when system information for showing low power popes
up.

1.3Power Supply and Battery

It's used with 12V 1.5A Power Adaptor. It charges
through external power when battery is out of power.
It's used with 8.4V 3000 mAH Lithium Battery. It needs
6 hours charging time by connecting power adaptor with
2.1.1Quick Search
external power or car charging. After it's full charge, it
works for more than 5 hours (It also depends on the load
of external antenna).

Notice: For initial charge, please make battery fully-

charged(We suggest it charge for 8 hours).

2.MENU
Press “ MENU” key to enter into main menu, and

4 | Digita Satellite Meter Digita Satellite Meter | 5

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

Press OK to the sub-menu 2.1.1.3 LNB Low Freq/ LNB High Frequency
Use the numerical button to input Freq Value of LNB
2.1.1.4 Frequency
Us the numerical button to input Freq Value of Frequency.
2.1.1.5 Symbol Rate
U s e t h e n u m e r i c a l b u t t o n t o i n p u t Va l u e f o r
S Y M B O L R AT E
2.1.1.6 Polarity
Chose Polar Mode(OFF/13V/18V)
2.1.1.7 LNB Power
Choose LNB Power type (OFF/13V/18V)
2.1.1.8 22K Tone
Close 22K TONE(ON/OFF)
2.1.1.9 Longitude
Use the numerical button to input Longitude of Satellite
2.1.1 .1 Satellite Name 2.1.1.10 My Longitude
To select the satellite name for receiving signal Use the numerical button to input Longitude of
Local Region
2.1.1.2 LNB Type
Select LNB Type 2.1.11 My Latitude
Use the numerical button to input Latitude of Local Regio
6 | Digita Satellite Meter Digita Satellite Meter | 7
T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.1.1.12 Set parameters, and press “OK” button to enter 2.1.1.14 Scan All
the Sub-menu, and then adjust the dish according to the Scan all programs of all channels, and automatically store
interface parameters. them after scanning, and then return back to theprevious
menu.
2.1.1.15 Zoom
Use ◄ ► button to select Zoom, and press “OK”
button to enter the Sub-menu, and then adjust the dish to
the best direction.

2.1.1.13TP Scan
Scan all programs of the current frequency, and
automatically store them after scanning, and then
return back to the previous menu.

2.2 Satellite Install

8 | Digita Satellite Meter Digita Satellite Meter | 9

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.1.2.1 Sat Manager

Press “OK” button to enter the Sub-menu, and then
set the state of the dish

2.1.2.1.1 Switch Type

Press ◄ ► button to choose Switch Type(NONE,
DisEqC1.0/1.1, DisEqC 1.2/USALS)

2.1.2.1.2Toneburst
Press ◄ ► button to choose Toneburst mode
(OFF/ON).
2.2 DVB-T
Press “ MENU” to enter into main menu, and use Arrow
key to move cursor, and Select DVB-T, andthen press
“OK” enter DVB-T system.

2.1.3 TP Manager
Press “OK” button to enter the Sub-Menu, and then
make operations according to to the instructions.

10 | Digita Satellite Meter Digita Satellite Meter | 11

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.2.1 Quick search 2.2.1.1.1Country Setting

Press OK to enter the sub-menu To select country to receive signal
2.2.1.1.2Channel
To select channel type to be received
2.2.1.1.3Frequncy
To set frequency for receiving signal by inputting frequency
value with numerical keys
2.2.1.1.4Bandwidth
To Select Bandwidth 6M/7M/8M based on your local region.
2.2.1.1.5LCN
2.2.1.1Quick Search Select LCN ON or LCN Off
2.2.1.1.6 Antenna Setting
To select antenna power ON/OFF
2.2.1.1.7 Antenna Power
To select antenna power voltage（OFF/5V/12V/15V/18V/24V）
2.2.1.1.8
To set parameter, and press “ OK” to enter into sub-menu.

12 | Digita Satellite Meter Digita Satellite Meter | 13

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.2.1.1.8.2 Scan All

To scan all channels, and it auto-restores the scanned
channels, and then return to previous menu.
2.2.2Freq-Checking

2.2.1.1.8.1 Scan
To scan all the channels of current frequency, and it auto-
restores the scanned channels, and then return to previous
menu. 2.2.2.1 Move
Press ▲▼ button to move Cursor
2.2.2.2Select
Press ◄ ►button to local channel, and tick the box to select it.
2.2.2.3
Press OK button to enter into multichannel display.
Each screen display signal indicators of five channels, and
press ◄ ► button to PGUP or PGDOWN.

14 | Digita Satellite Meter Digita Satellite Meter | 15

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.3 Multimedia 2.3.1 Photo

Previewing the pictures in JPG format, and make operations
according to its instructions.

For Multimedia, the external memory should be

inserted into USB port. Otherwise, “Device not
s u p p o r t e d ” w i l l p o p u p o n t h e w i n d o w.

16 | Digita Satellite Meter Digita Satellite Meter |17

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.3.2 My Music 2.4.2 SW Update

Play the Music in MP3 format, and then make operations To upgrade SW or Data through USB port.
according to its instructions. To store the upgrading file in the external memory, and
insert it into USB port, and then enter upgrade menu.
To select the file, it will automatically return back to the
previous menu after upgrade.

2.4 System Setup

2.4.1 OSD Language

Set OSD Language

18 | Digita Satellite Meter Digita Satellite Meter |19

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.4.3 Set Default

Press “OK” button to set Factory Default.
2.4.4 GMT Usage
Set the GMT parameter
2.5 Shortcut Buttons
2.5.1 Press “OK” button to enter the Sub-menu when it's
playing programs, and make operations according to its
instructions.

2.5.3Press “F2” button to enter Sub-menu when

playing programs, and make operations according
to its instructions.

2.5.2 Press “F1” button to enter the Sub-menu when

playing programs, and make operations according to
its instructions.

20 | Digita Satellite Meter | Digita Satellite Meter 21

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

2.5.4 Press “F3” button to enter the Sub-menuwhen it's Specifications

playing programs, and make operations according to its S ystem Cap ab ilities Fu lly DVB-S C omp liant Ye s
instructions. C onnec tor F type , Fe male
F requency Range 950MHz-2150M Hz
S ignal Level -65dBm ~-25dB m
DVB-S
LNB Powewr 13/18V,M ax350mA
LNB Switch Control 22KHz
Atenna input
DiSEqC Ve r 1.0/ 1.2
C onnec tor IEC Fe male 9.5m m
F requency range VHF and UHF
DVB-T
B andwith 8/7/6M Hz
I nput impedance 75 ohm
F ront e nd QP SK
DVB-S De modulation R ange 2M bps~45Mbps
S CPC and M CPC Capable Ye s
M odulation COFDM
De modulator
C onstellation QP SK,16QAM ,64QAM
DVB-T
2.5.5 Press “F4” button to enter the Sub-menu when it's Transmission mode 2K,8K
Guard interval 1/2,1/4,1/8,1/16,1/32
playing programs, and make operations according to its F EC 1/2,2/3,3/4,4/5,5/6,7/8
instructions. P rocessor 32bit processor (133MHz)
S ystem Resour ces F LAS H 8M byte
S DRAM 4*16Mbyte
M PEG 2 MP@ M L
Da ta Rate Max15M bits/s
Video Decoder
R esolution 720*576,720*480
Video form at PAL/NTSC/SEC AM
M PEG MPEG-1&2
Audio Type Single
S ampling R ate 32,44.1 & 48KHz
Da ta Transf er C onnec tor US B
LI- ION batter y 3000 mAH/8.4V Max
P owe r Supply In AC 100-220V
P owe r Adaptor
Out DC 12V
S iz e 9.5x15.5x4.5 (cm )
P hysical charac ter istics
Ne t Weight 0.5KG

22 | Digita Satellite Meter | Digita Satellite Meter 23

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

once per half month so as to prevent over discharge.

The battery is expendable.
Warning: Handling:
You are using Lithium ion batteries and Nickel metal hydride
batteries in the machine now, so Please don't work under Improper setting of new battery may lead to the battery
high temperature or high pressure conditions. If the follo- burst.
wing items happened, abnormal chemical reaction may occur Please use the battery only supplied by the manufacturer, if
which will lead to the battery overheat, emit smoke, ignite you want to change a new battery.
and/or burst.
Please do not put the battery in fire or dispose it together
(1)incinerate and dispose the battery in fire or heat it;
(2)pierce the battery with a nail or other sharp objects, strike with garbage.
it with a hammer or step on it; Please contact the waste administrative institute in your
(3)immerse the battery with water or connect the positive(+) place to get the nearest battery collection station.
and negative(-) terminals with a metal objects such as
necklaces, hair pins, etc.

Notice:
The battery is only applicable to the charger which
supplied or appointed by the manufacturer of this machine.
The charging time should be minimum 5 hours for the first
time, and it should not be charged over 12 hours after the
first time.
Please keep your machine off when the battery is charging.
The battery should be stored within a temperature range of
0℃ to 40℃.
When stored for a long period, charge the battery at least

24 | Digita Satellite Meter | Digita Satellite Meter 25

T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L | T H E P R O F E S S I O N A L E Q U I P M E N T - - - - - - - - - - - - - - - - - - | U S E R ’S M A N U A L |

Product Standard Package

Car charger cable AV cable

Power Strap

Carrying case
26 | Digita Satellite Meter | Digita Satellite Meter 27