FDS8884 N-Channel PowerTrench® MOSFET

February 2006

FDS8884
N-Channel PowerTrench® MOSFET
30V, 8.5A, 23mΩ
General Descriptions Features
„ Max rDS(on) = 23mΩ at VGS = 10V, ID = 8.5A
This N-Channel MOSFET has been designed specifically
to improve the overall efficiency of DC/DC converters using „ Max rDS(on) = 30mΩ at VGS = 4.5V, ID = 7.5A
either synchronous or conventional switching PWM
controllers. It has been optimized for low gate charge, low „ Low gate charge
rDS(on) and fast switching speed.
„ 100% RG Tested
REE I
DF
A „ RoHS Compliant
MP
LE

LE
M ENTATIO
N

D
D 5 4
D
D www.DataSheet4U.com
6 3

7 2
G
S 8 1
S
SO-8 S

MOSFET Maximum Ratings TA = 25°C unless otherwise noted

Symbol Parameter Ratings Units
VDS Drain to Source Voltage 30 V
VGS Gate to Source Voltage ±20 V
Drain Current Continuous (Note 1a) 8.5 A
ID
Pulsed 40 A
EAS Single Pulse Avalanche Energy (Note 2) 32 mJ
Power dissipation 2.5 W
PD
Derate above 25oC 20 mW/oC
o
TJ, TSTG Operating and Storage Temperature -55 to 150 C

Thermal Characteristics
RθJA Thermal Resistance, Junction to Ambient (Note 1a) 50 oC/W

o
RθJA Thermal Resistance, Junction to Case (Note 1) 25 C/W

Package Marking and Ordering Information

Device Marking Device Package Reel Size Tape Width Quantity
FDS8884 FDS8884 SO-8 330mm 12mm 2500 units

©2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com

FDS8884 Rev. A
 FDS8884 N-Channel PowerTrench® MOSFET
Electrical Characteristics TJ = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Typ Max Units

Off Characteristics
BVDSS Drain to Source Breakdown Voltage ID = 250µA, VGS = 0V 30 V
∆BVDSS Breakdown Voltage Temperature ID = 250µA, referenced to
23 mV/oC
∆ TJ Coefficient 25oC
VDS = 24V 1
IDSS Zero Gate Voltage Drain Current µA
VGS = 0V TJ = 125oC 250
IGSS Gate to Source Leakage Current VGS = ±20V ±100 nA

On Characteristics (Note 3)
VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250µA 1.2 1.7 2.5 V
∆VGS(th) Gate to Source Threshold Voltage ID = 250µA, referenced to
-4.9 mV/oC
∆ TJ Temperature Coefficient 25oC
VGS = 10V, ID = 8.5A, 19 23
VGS = 4.5V , ID = 7.5A, 23 30
rDS(on) Drain to Source On Resistance mΩ
VGS = 10V, ID = 8.5A,
26 32
TJ = 125oC

Dynamic Characteristics
Ciss Input Capacitance 475 635 pF
VDS = 15V, VGS = 0V,
Coss Output Capacitance 100 135 pF
f = 1MHz
Crss Reverse Transfer Capacitance 65 100 pF
RG Gate Resistance f = 1MHz 0.9 1.6 Ω

Switching Characteristics (Note 3)

td(on) Turn-On Delay Time 5 10 ns
VDD = 15V, ID = 8.5A
tr Rise Time 9 18 ns
VGS = 10V, RGS = 33Ω
td(off) Turn-Off Delay Time 42 68 ns
tf Fall Time 21 34 ns
VDS = 15V, VGS = 10V
Qg Total Gate Charge 9.2 13 nC
ID = 8.5A
Qg Total Gate Charge VDS = 15V, VGS = 5V 5.0 7 nC
Qgs Gate to Source Gate Charge ID = 8.5A 1.5 nC
Qgd Gate to Drain Charge 2.0 nC

Drain-Source Diode Characteristics

ISD = 8.5A 0.9 1.25 V
VSD Source to Drain Diode Voltage
ISD = 2.1A 0.8 1.0 V
trr Reverse Recovery Time IF = 8.5A, di/dt = 100A/µs 33 ns
Qrr Reverse Recovery Charge 20 nC
Notes:
1: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the
drain pins. RθJC is guaranteed by design while RθCA is determined by the user’s board design.

a) 50°C/W when b) 105°C/W when c) 125°C/W when

mounted on a 1 in2 mounted on a .04 in2 mounted on a
pad of 2 oz copper pad of 2 oz copper minimun pad

Scale 1 : 1 on letter size paper

2: Starting TJ = 25°C, L = 1mH, IAS = 8A, VDD = 27V, VGS = 10V.

3: Pulse Test:Pulse Width <300µs, Duty Cycle <2%.

2 www.fairchildsemi.com
FDS8884 Rev. A
 FDS8884 N-Channel PowerTrench® MOSFET
Typical Characteristics TJ = 25°C unless otherwise noted

40 3.0

DRAIN TO SOURCE ON-RESISTANCE

PULSE DURATION = 80µs PULSE DURATION = 80µs
DUTY CYCLE = 0.5%MAX DUTY CYCLE = 0.5%MAX
VGS = 3V
ID, DRAIN CURRENT (A)

VGS = 10V 2.5

30
VGS = 5.0V VGS = 3.5V

NORMALIZED
VGS = 3.5V 2.0
VGS = 4.5V VGS = 4V
20 VGS = 4.5V
VGS = 4.0V 1.5

10 VGS = 3V
1.0
VGS = 5V VGS = 10V

0 0.5
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5 10 15 20 25 30 35 40
VDS, DRAIN TO SOURCE VOLTAGE (V) ID, DRAIN CURRENT(A)

Figure 1. On Region Characteristics Figure 2. Normalized On-Resistance vs Drain

current and Gate Voltage

1.6 60
DRAIN TO SOURCE ON-RESISTANCE

ID = 8.5A ID = 8.5A PULSE DURATION = 80µs

VGS = 10V 55
DUTY CYCLE = 0.5%MAX
rDS(ON), DRAIN TO SOURCE

1.4
ON-RESISTANCE (mΩ)

50
45
NORMALIZED

1.2
40

1.0 35 TJ = 150oC
30
0.8 25
20 TJ = 25oC
0.6 15
-80 -40 0 40 80 120 160 2 4 6 8 10
TJ, JUNCTION TEMPERATURE (oC) VGS, GATE TO SOURCE VOLTAGE (V)

Figure 3. Normalized On Resistance vs Junction Figure 4. On-Resistance vs Gate to Source

Temperature Voltage

40 40
PULSE DURATION = 80µs VGS = 0V
IS, REVERSE DRAIN CURRENT (A)

35 DUTY CYCLE = 0.5%MAX 10

ID, DRAIN CURRENT (A)

30
VDD = 5V TJ = 25oC TA = 150oC
1 TJ = 25oC
25

20
0.1
15 TJ = -55oC
TJ = 150oC
10 0.01
5 TJ = -55oC

0 1E-3
1 2 3 4 5 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
VGS, GATE TO SOURCE VOLTAGE (V) VSD, BODY DIODE FORWARD VOLTAGE (V)

Figure 5. Transfer Characteristics Figure 6. Source to Drain Diode Forward Voltage

vs Source Current

3 www.fairchildsemi.com
FDS8884 Rev. A
 Typical Characteristics TJ = 25°C unless otherwise noted

FDS8884 N-Channel PowerTrench® MOSFET

VGS, GATE TO SOURCE VOLTAGE(V) 10 700

600
8 Ciss

CAPACITANCE (pF)
VDD = 15V 500
VDD = 10V f = 1MHz
6 VGS = 0V
400

4 VDD = 20V
300
Coss
200
2
100 Crss

0
0 2 4 6 8 10 0.1 1 10 30
Qg, GATE CHARGE(nC) VDS, DRAIN TO SOURCE VOLTAGE (V)

Figure 7. Gate Charge Characteristics Figure 8. Capacitance vs Drain to Source Voltage

20 9
IAS, AVALANCHE CURRENT(A)

8
VGS = 10V
10 ID, DRAIN CURRENT (A) 7
6
STARTING TJ = 25oC
5 VGS = 4.5V

4
3
STARTING TJ = 125oC
2
1 RθJA = 50oC/W
1 0
0.01 0.1 1 10 20 25 50 75 100 125 150
tAV, TIME IN AVALANCHE(ms)
TA, AMBIENT TEMPERATURE(oC)

Figure 9. Unclamped Inductive Switching Figure 10. Maximum Continuous Drain Current vs
Capability Ambient Temperature

100 2000
P(PK), PEAK TRANSIENT POWER (W)

TA = 25oC
1000
10us FOR TEMPERATURES
ID, DRAIN CURRENT (A)

ABOVE 25oC DERATE PEAK

10 CURRENT AS FOLLOWS:
100us 150 – T
A
I = I25 ------------------------
100 125
VGS=10V
1 1ms

OPERATION IN THIS 10ms

AREA MAY BE
LIMITED BY rDS(on) 100ms 10
0.1
SINGLE PULSE 1s
TJ = MAX RATED
o DC SINGLE PULSE
TA = 25 C
0.01 1
0.1 1 10 100 10
-5
10
-4
10
-3
10
-2
10 10
-1 0
10
1
10
2

VDS, DRAIN TO SOURCE VOLTAGE (V) t, PULSE WIDTH (s)

Figure 11. Forward Bias Safe Operating Area Figure 12. Single Pulse Maximum Power
Dissipation

4 www.fairchildsemi.com
FDS8884 Rev. A
 FDS8884 N-Channel PowerTrench® MOSFET
Typical Characteristics TJ = 25°C unless otherwise noted

2
1 DUTY CYCLE-DESCENDING ORDER

D = 0.5
NORMALIZED THERMAL

0.2
IMPEDANCE, ZθJA

0.1
0.1 0.05
0.02 PDM
0.01

t1
0.01
t2
SINGLE PULSE
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TA
1E-3
-5 -4 -3 -2 -1 0 1 2 3
10 10 10 10 10 10 10 10 10
t, RECTANGULAR PULSE DURATION(s)
Figure 13. Transient Thermal Response Curve

5 www.fairchildsemi.com
FDS8884 Rev. A
 FDS8884 N-Channel PowerTrench® MOSFET
TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™ FAST® ISOPLANAR™ PowerSaver™ SuperSOT™-6
ActiveArray™ FASTr™ LittleFET™ PowerTrench® SuperSOT™-8
Bottomless™ FPS™ MICROCOUPLER™ QFET® SyncFET™
Build it Now™ FRFET™ MicroFET™ QS™ TCM™
CoolFET™ GlobalOptoisolator™ MicroPak™ QT Optoelectronics™ TinyLogic®
CROSSVOLT™ GTO™ MICROWIRE™ Quiet Series™ TINYOPTO™
DOME™ HiSeC™ MSX™ RapidConfigure™ TruTranslation™
EcoSPARK™ I2C™ MSXPro™ RapidConnect™ UHC™
E2CMOS™ i-Lo™ OCX™ µSerDes™ UltraFET®
EnSigna™ ImpliedDisconnect™ OCXPro™ ScalarPump™ UniFET™
FACT™ IntelliMAX™ OPTOLOGIC® SILENT SWITCHER® VCX™
FACT Quiet Series™ OPTOPLANAR™ SMART START™ Wire™
PACMAN™ SPM™
Across the board. Around the world.™ POP™ Stealth™
The Power Franchise® Power247™ SuperFET™
Programmable Active Droop™ PowerEdge™ SuperSOT™-3

DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.

As used herein:
1. Life support devices or systems are devices or systems 2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body, or device or system whose failure to perform can be
(b) support or sustain life, or (c) whose failure to perform reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.

PRODUCT STATUS DEFINITIONS

Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In This datasheet contains the design specifications for
Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and

supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I18

6 www.fairchildsemi.com
FDS8884 Rev. A