NUMBER : TSNH00233151-S1

Applicant : Tianjin Jinmao Group Co.,Ltd Date : Jun 13, 2017

Wangzhuang Industrial Park Beichen District TianJin This is to superseded report
P.R.China TSNH00233151 dated Jun 09,
Attn :LIU MEI 2017

Sample Description:
Four (4) submitted samples said to be
(A) Fiberglass Extension Ladders(FM42-208IA)
(B) Fiberglass Extension Ladders(FM42-210IA)
(C) Fiberglass Extension Ladders(FM42-212IA)
(D) Fiberglass Extension Ladders(FM42-214IA)
Item Name : FIBERGLASS EXTENSION LADDERS
Style No. : FM42-208/210/212/214IA
As per client’s requirement, only sample (D) was tested.
*******************************************************************************************************************************
Tests Conducted:
As requested by the applicant, for details refer to attached page(s).
*******************************************************************************************************************************
Conclusion:
Tested sample Standard Result
(D) ANSI-ASC A14.5-2007 American National Standard Pass
For Ladder-Portable Reinforced Plastic – Safety
Requirements
excluding-
Clause 6.1.10 – Plastic Top Caps
Clause 7 – Fiberglass Material Specifications for
ladder
Clasue 8.6 –Labeling tests
Clause 10 – Labeling/marking requirements
**********************************************************************************************************************************
To be continued

Authorized By :
For Intertek Testing Services
(Tianjin) Ltd.

David Zhang
Senior Manager

Page 1 of 5
 NUMBER : TSNH00233151-S1
Safety Requirements And Test Method For Portable Reinforced Plastic Ladders

With reference to ANSI A14.5-2007 American National Standard For Ladder-Portable Reinforced Plastic – Safety
Requirements, the samplewas subjected to the on site testing as follow:
Number Of Sample Tested: One Piece
Ladder Type: Extension Ladder
Maximum Working Load: 300 lbs
Duty Rating And Type: Extra Heavy Duty – Type IA
Initial Inspection: No any damage was found.
Executive Summary:
Clause Testing items Verdict
1 Scope and purpose
2 General
3 Related standards
4 Definitions and nomenclature
5 General requirements
5.1 Flare Parallel
5.2 Side rails P#1
5.3 Rung and step spacing P
5.4 Rung connections P
5.5 Rungs, steps, and platforms P
5.6 Hardware P
5.7 Burrs, bolts, rivets, and welds P
5.8 Angle of inclination P#2
5.9 Plastic top caps NA
6 Specification
6.1 Stepladders
6.2 Single and extension ladders
6.2.1 Single ladder width NA
6.2.2 Extension ladder width P
6.2.3 Single ladder size NA
6.2.4 Extension ladder size P
6.2.5 Overlap and bearing length P
6.2.6 Overlap control P
6.2.7 Extension locking device P
6.2.8 Rope and pulley P
6.2.9 Shoes, spurs, and other slip-resistant devices P
6.2.10 End caps and end closures P
6.3 Trestle (double front) and extension trestle ladders NA
6.4 Platform ladders NA
6.5 Combination ladders NA
6.6 Step stools(ladder type) NA
6.7 Articulated ladders NA
7 Fiberglass Material Specifications for ladder NC#1
8 Test Requirements
8.1 General -
8.2 Combination ladder tests NA
8.3 Single, extension, combination, and articulated ladder tests

Page 2 of 5
 NUMBER : TSNH00233151-S1
Clause Testing items Verdict
8.3.1 Horizontal bending test P
8.3.2 Deflection test P
8.3.3 Simulated in-use inclined load test P
8.3.4 Hardware test requirements P
8.3.5 Extension-ladder rung bending strength test P
8.3.6 Rung-to-side-rail shear strength test P
8.3.7 Rung torque tests P
8.3.8 Side sway test P
8.3.9 Side rail cantilever bending tests P
8.3.10 Ladder section twist test P
8.3.11 Foot slip test P
8.3.12 Multisession extending force test P
8.4 Articulated ladder tests NA
8.5 Step, trestle (double front), extension trestle, platform, combination, NA
articulated ladder and step stool tests
8.6 Labeling tests NC#1
8.7 Cyclic loading test
8.7.1 General -
8.7.2 Single, extension, and combination ladder P
8.7.3 Cyclic Side rail bending test for step, trestle, extension trestle, platform NA
and combination ladders
9 Selection, care, and use -
10 Labeling/marking requirements NC#1
Abbreviation : P = Pass NA = Not Applicable NC = Not Conducted

Note:
#1: As requested by the applicant, the material test for the plastic components of the sample as per clause 7, 8.6 & 10
were not conducted.
#2: Angle of inclination was indicated on the marking "set single or extension ladder at proper 75-1/2 degree angle"

Date sample received:Jun 02, 2017

Testing period: Jun 02, 2017 to Jun 08, 2017
************************************************************************************************************************************
To be continued
This report is made solely on the basis of your instructions and/or information and materials supplied by you. It is not intended to be a recommendation for any
particular course of action. Intertek does not accept a duty of care or any other responsibility to any person other than the Client in respect of this report and only
accepts liability to the Client insofar as is expressly contained in the terms and conditions governing Intertek’s provision of services to you. Intertek makes no warranties
or representations either express or implied with respect to this report save as provided for in those terms and conditions. We have aimed to conduct the Review on a
diligent and careful basis and we do not accept any liability to you for any loss arising out of or in connection with this report, in contract, tort, by statute or otherwise,
except in the event of our gross negligence or wilful misconduct.

Page 3 of 5
 NUMBER : TSNH00233151-S1
Photo,

************************************************************************************************************************************
To be continued

Page 4 of 5
 NUMBER : TSNH00233151-S1

RE : Report Revision Notification

Report Number TSNH00233151 Dated Jun 09, 2017

Please be informed that all the content recorded in the above captioned report will be void. This captioned report
is now superseded by a revised report, number TSNH00233151-S1, issued on Jun 13, 2017

Please return the original captioned report to us immediately.

Thank you for your attention.

************************************************************************************************************************************
End of report

Page 5 of 5