Fisa Tehnica Modul de Acces Rosslare MD IO84
Fisa Tehnica Modul de Acces Rosslare MD IO84
Fisa Tehnica Modul de Acces Rosslare MD IO84
GENERAL DESCRIPTION
Rosslare’s MD-IO84 expansion board is designed LED status feedback for 12 V power and relay
with a focus on high quality and reliability and is activation
ideal for residential and commercial applications. Cost effective and simple installation
The expansion board adds four relay outputs and
eight supervised inputs to the access control panel. Compatible with Rosslare’s AC-225, AC-425
As a result, an access control panel with an and AC-525 networked access controllers
MD-IO84 expansion board can support a total of Input and output configurability using
12 supervised Inputs and 8 5 A Form-C relay Rosslare’s AS-525 AxTrax™ software
outputs.
Easy to install and operate, the MD-IO84
expansion board features state-of-the-art
supervised communications with the controller.
The host access controller has complete control
over the additional inputs and outputs of the
MD-IO84 expansion board.
The MD-IO84 is compatible with Rosslare's
AC-225, AC-425 and AC-525 networked control
panels.
MAIN FEATURES
Eight additional supervised inputs
Four additional fully programmable relay
outputs
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Number of Outputs 4
Number of Inputs 8
Output Relays 5 A with N.O., N.C. and COM contacts Form-C Relays
INPUT SPECIFICATIONS
Selectable: Normally Open, Normally Closed, Non-supervised (two
Input Type states), supervised with one resistor (three states), supervised with
two resistors (four states)
LED INDICATORS
Active when mounted correctly on the host controller (AC-225 or
Power LED AC-525)
Four LEDs; each output LED is active when an output relay is
Output LEDs activated and N.O. to COM contacts are shorted
PHYSICAL SPECIFICATIONS