CompTIA Network+

Certification Exam Objectives

Hey! Thanks for downloading this PDF!

I’m looking forward to learning with you.
If you have any questions about this,
head to my website hackerbella.xyz​ and
comment on the blog. I’m happy to help.
- ​Allie Mellen

1.0 Networking Concepts

1.1 Explain the purposes and uses of ports and protocols.

In computer networking, ​a port​ is an endpoint in a computer used for communication.

Protocols and Ports

Protocol Port TCP/UDP Description Applications Interesting Facts

SSH 22 TCP The ​Secure Shell​ (SSH) protocol is Any Network SSH was meant ​to
a cryptographic network protocol Service replace FTP (Port 21)
that allows secure network services Common: and TELNET (Port
over an unsecured network. It uses ● Remote 23)​, which is why it
a ​client-server architecture​ to Comman was assigned Port 22.
connect an SSH client to an SSH d-line
server. ● Login
● Remote
Comman
d
Execution

DNS 53 UDP/TCP The ​Domain Name System​ (DNS) Human-readable DNS functions as the
protocol is a detailed specification Hostnames for phonebook​ for the
of all data structures and Websites Internet.
communication exchanges used in
the Domain Name System.

SMTP 25 TCP The ​Simple Mail Transfer Protocol Email SMTP is believed to
(SMTP) is a communication have roots in ​the Mail
protocol for email. Box Protocol
(disputed
 implementation).

FTP 20, TCP The ​File Transfer Protocol​ (FTP) is File Transfer I didn’t find anything
21 a network protocol to transfer really interesting
computer files. It uses a about this one. Let me
client-server architecture​ to connect know in the comments
an FTP client with an FTP server. if you do.

TFTP 69 UDP The ​Trivial File Transfer Protocol Nodes Booting As the name
(TFTP) is a lockstep file transfer From a ​LAN suggests, TFTP has a
protocol used for transferring files. simple design and
limited features​,
therefore it has a
small memory
footprint.

TELNET 23 TCP The ​TELNET (Teletype Network) ● Remote Not only does
protocol​ is an application protocol to Manage TELNET
provide bi-directional eight-bit byte ment communicate over
oriented communications. It is used ● Initial port 69, it was also
as a method of interfacing terminal Device developed in 1969​.
devices and terminal-oriented Setup for
processes. Network
Hardware

DHCP 67, UDP The ​Dynamic Host Configuration Communicating DHCP is based on the
68 Protocol​ (DHCP) is a network network Bootstrap Protocol
protocol used by DHCP servers to parameters (BOOTP).
respond to queries by clients to be
set up on the network. Without
DHCP servers, network admins
would have to manually set up
every client that joins the network.

HTTP 80 TCP The ​Hypertext Transfer Protocol Data HTTP development

(HTTP) is a network protocol for Communication started at CERN​ in
distributed and collaborative on the World 1989. Yes, that
hypermedia information systems. Wide Web CERN​.
HTTP uses the client-server
computing model and acts as a
request-response protocol. For
example, in this situation, a user's
web browser may be the client,
while the computer hosting the web
application they are accessing
through their browser would be the
server.

HTTPS 443 TCP The ​Hypertext Transfer Protocol Secure Data HTTPS is meant to
Secure​ (HTTPS) is the secure Communication provide all that HTTP
communication extension of HTTP. on the World does, with added
The communication protocol in Wide Web authentication,
HTTPS is encrypted using ​TLS​. privacy, and integrity
 through bi-directional
encryption.

SNMP 161 UDP The ​Simple Network Management Network I didn’t find anything
Protocol​ (SNMP) is a protocol to Management really interesting
help communicate management and Monitoring about this one. Let me
information for devices on the know in the comments
network. This can include routers, if you do.
modems, switches, servers,
workstations, printers, etc.

RDP 338 TCP/UDP The ​Remote Desktop Protocol Remote Access This protocol is
9 (RDP) is a network communications of Windows and proprietary and
protocol for remote management macOS. developed by
and access. Microsoft.

NTP 123 UDP The ​Network Time Protocol​ (NTP) Time NTP uses the
is a network protocol to synchronize Synchronization: intersection algorithm
clocks between devices to within a Air traffic control to choose time
few milliseconds of Coordinated was ​an early servers and prevent
Universal Time. application of network latency
NTP​. issues.

SIP 506 TCP/UDP The ​Session Initiation Protocol Communication SIP is lauded for
0, (SIP) is a protocol used for real-time Over Voice, having been
506 voice, video, and messaging Video, and established in the
1 sessions. Messaging Internet community
instead of the
telecommunications
community.

SMB 445 TCP/UDP The​ Server Message Block​ (SMB) File Sharing I didn’t find anything
protocol is a protocol used to share really interesting
files, printers, serial ports, and about this one. Let me
communications abstractions know in the comments
between devices. if you do.

POP 110 TCP The ​Post Office Protocol​ (POP) is a Email Retrieval The name speaks for
protocol that is used to retrieve itself.
email from a mail server in
conjunction with SMTP.

IMAP 143 TCP The ​Internet Message Access Email Retrieval The main difference
Protocol ​(IMAP) is a protocol to between POP and
retrieve email from a mail server. IMAP is that IMAP
allows
synchronization
between devices and
the mail server.

LDAP 389 TCP/UDP The ​Lightweight Directory Access User Validation LDAP was used for
Protocol​ (LDAP) is a protocol for Through Storage the basis of ​Microsoft
maintaining distributed directory of Usernames Active Directory​.
information services. This is and Passwords
 important to help share information
about users, systems, networks,
services, and applications.

LDAPS 636 TCP/UDP The Lightweight Directory Access User Validation I didn’t find anything
Protocol over SSL (LDAPS) is a Through Storage really interesting
method of securing LDAP using an of Usernames about this one. Let me
SSL tunnel. and Passwords, know in the comments
Securely if you do.

H.323 172 TCP H.323​ is a series of protocols for Voice and Video Though H.323 was
0 audio-visual communication. It Conferencing originally meant for
specifically addresses call signaling videoconferencing
and control, multimedia transport over LAN, it quicky
and control, and bandwidth control. spread to a variety of
networks including
WAN and the Internet.

Related Definitions
● Protocol
○ A protocol is a set of rules to determine how to act in a given situation.
● Cryptographic Protocol
○ A cryptographic protocol is a set of rules to allow secure communication under a given set of
circumstances.
● Client-server Architecture
○ Client-server architecture is an architecture of a computer network that allows clients, or client
computers, to request services from a server, or host computer.
● Domain Name System
○ The ​Domain Name System​ (DNS) is a decentralized, hierarchical naming system for devices connected
to the Internet or a private network.
● Decentralized System
○ A ​decentralized system​ is one in which some components operate on local information instead of all
being tied to the same source.
● Lockstep
○ Lockstep systems are systems that run the same set of operations at the same time in parallel so they
may be fault-tolerant. This allows error detection and correction, since the outputs can be compared
and corrected with at least three parallel systems.
● Local Area Network
○ A ​local area network ​(LAN) is a computer network that connects computers in a small (or ​local)​ area,
such as a house.
● Transport Layer Security
○ Transport Layer Security​ (TLS) is a cryptographic protocol to secure communications on a computer
network.
● Directory Service
○ A ​directory service​ is responsible for mapping network resources to network addresses.
● SSL Tunnel
 ○ An SSL ​tunnel​ is a communications protocol used to move data from one network to another securely
using SSL.
● Datagrams
○ Datagrams​ are a basic transfer unit with a header and payload section transmitted on the network.

Protocol Types
● ICMP
○ Internet Control Message Protocol​ (ICMP) is a supporting protocol for network devices. It allows them
to send error messages and operational information regarding success or failure during communication
with other devices. Unlike TCP and UDP, ICMP is not used for data exchange or for end-user network
applications (except ​ping​ and ​traceroute​).
● UDP
○ User Datagram Protocol​ (UDP) is a protocol to send messages to other devices on the network without
the need for previous communications. UDP is fast, but not necessarily as reliable as TCP.
● TCP
○ Transmission Control Protocol​ (TCP) is a protocol to send bytes between devices on a network. It is
reliable, ordered, and error-checked on delivery, unlike UDP, which is much faster but more
error-prone.
● IP
○ Internet Protocol​ (IP) is the OG network communications protocol for relaying datagrams to other
devices across network boundaries. The IP enables internetworking, the foundations of the Internet.
● Connection-oriented
○ A connection-oriented protocol is a protocol where data transmission relies on an established
connection. A stream of data must be delivered in the appropriate order and a communication session
has to be established before data can be sent.
● Connectionless
○ Connectionless communication is data transmission that does not rely on an established connection.
Each data unit is addressed and routed based on the information it contains, therefore, any particular
message can be sent without previous communications being established, and data units can arrive in
any order.

1.2 Explain devices, applications, protocols, and services at their appropriate OSI
layers.
The ​Open Systems Interconnection​ (OSI) model is a standardized, conceptual model to help devices to communicate
with each other. It splits communication into seven stacked layers, each of which is able to communicate with the
layers above or below itself. When data is flowing through the OSI model, data on the sending device travels down,
while data on the receiving device travels up.

Something interesting to note: denial of service attacks target parts of the network layer. Application layer attacks
target the application layer. And protocol attacks target the protocol layer. Makes sense!
Layer 7: Application
The application layer is the layer used to communicate with the user; applications like web browsers and email rely on
the application layer for communication.​ Applications are not part of the application layer.​ They use the application
layer to communicate.

Layer 6: Presentation
The presentation layer does just what it says: it makes data “presentable” for the application layer. Think things like
data translation, encryption, and compression. Day to day, the presentation layer may need to work with the
application layer or the session layer. It translates incoming data so the application layer on the device can understand
it, and it also adds encryption/decryption as necessary. The presentation layer may also compress data coming in
from the application layer that it will then efficiently pass on to the session layer.

Layer 5: Session
The session layer opens and closes sessions between devices (hence, the session layer. I’m sensing a pattern…).
The session layer makes sure the session is open for as long as needed, can quickly close the session, and can
synchronize data transfers with checkpoints. Checkpoints help keep everything connected - if a session layer has a
checkpoint every five megabytes for a 100 megabyte file, but the file gets cut off at 44 megabytes, the session layer
will reconnect and transfer starting from the 40 megabyte mark (the latest checkpoint). Otherwise, it would have to
start from scratch every time a session is interrupted.

Layer 4: Transport
The transport layer is responsible for end-to-end communication on the network between devices; specifically, the
transport layer receives and outputs data without errors. Typically, the sending device breaks down application
messages into segments that are then passed on to the network layer. Contrastingly, the receiving device
reassembles segments into messages, which can then be passed to the application layer.

Layer 3: Network
The network layer is responsible for the facilitation of data transfer between devices on different networks. ​The
network layer is unnecessary if the devices are on the same network (more about that in the data link layer).
On the sender device, the network layer is responsible for packets: it creates packets from the segments passed in
from the transport layer. On the receiver device, the network layer reassembles the packets before sending them to
the transport layer. The network layer is also responsible for routing, finding an optimized path to pass data through.

Layer 2: Data Link

The data link layer is responsible for data transfer between devices on the same network.​ The data link layer
takes in data on the network and segments them into frames. It is also responsible for flow control and error control for
devices on the network.

Layer 1: Physical
The physical layer is responsible for the physical equipment necessary for data transfer, things like the cables and
switches. It’s also where data is converted into a bit stream. In order to properly align, the physical layer on both
devices must agree on a signal convention.
1.3 Explain the concepts and characteristics of routing and switching.

Properties of Network Traffic

● Broadcast Domains
○ Broadcast domains forward packets to all the machines on the network. It will only go to the machines
on the network, no more than that, and they do not cross network boundaries.
● CSMA/CD
○ Carrier-Sense Multiple Access with Collision Detection (CSMA/CD) is a MAC protocol for local area
networking used with Ethernet technology. The Collision Detection part references a method of
detecting collisions with other information being sent via transmissions from other stations.
● CSMA/CA
○ Carrier-Sense Multiple Access with Collision Avoidance (CSMA/CD) is a wireless network multiple
access method that allows travel of entire packets without collisions. It uses carrier sensing with nodes,
which try to avoid collisions when they sense that the channel is idle. However, it is unreliable.
● Collision Domains
○ Collision domains are segments of the network that connect through a shared medium and are
susceptible to simultaneous colliding data transmissions. This can happen for both wireless and early
Ethernet networks.
● Protocol Data Units
○ Protocol data units (PDUs) are single units of information transmitted between devices on a computer
network. This includes protocol-specific control data and user data. For TCP, the protocol data unit is a
segment, while for UDP, the protocol data unit is a datagram.
● MTU
○ Maximum transmission units (MTUs) are the largest possible PDUs that can be transmitted through a
single network layer transaction. Typically, the larger the MTU, the less overhead. However, the smaller
the MTU, the less network delay. It’s a tradeoff.
● Broadcast
○ A broadcast​ is when a device is sending packets to multiple receivers at once, including all of the hosts
connected to the network. This is known as all-to-all.
● Multicast
○ A multicast​ is when a device is sending packets to multiple receivers at once, but only to those that are
intended recipients. This is known as one-to-many routing, or can be used for many-to-many routing.
● Unicast
○ A unicast​ is when a device is sending packets to a single receiver at once. This is known as one-to-one
routing.

Segmentation and Interface Properties

● VLANs
○ Virtual LANs (VLANs) are a group of devices in the same broadcast domain. What makes VLANs
different from physical LANs is that hosts can be grouped together even if they are not connected to the
same switch.
● Trunking (802.1Q)
○ Trunking is connecting two VLANs such that traffic may pass between them. 802.1Q is merely the
trunking protocol. It is the most common trunking protocol and is standardized across vendors.
 ● Tagging and untagging ports
○ Tagged ports are a way of identifying that a packet belongs to the appropriate VLAN. The packets are
tagged with a VLAN tag in the Ethernet frame. This is the core difference between tagged and
untagged packets: tagged packets have VLAN information, untagged packets do not.
● Port mirroring
○ Port mirroring​ is where a device (Device A) on the same switch as another device (Device B) can
“listen” to the incoming traffic on Device A. Device B receives a copy of every network packet seen
going to Device A. Whether or not this is allowed depends solely on whether or not the switch Devices
A and B are connected to supports port mirroring.
● Switching loops/spanning tree
○ A switching loop occurs when two endpoints are connected by more than a single Layer 2 path. This is
meant to be addressed by the Spanning Tree Protocol.
○ The ​Spanning Tree Protocol​ (STP) is a layer 2 protocol to prevent loops from redundant paths in a
network. It uses the Spanning Tree algorithm to ensure there are no loop paths in the network with
Bridge Protocol Data Units (BPDUs), to identify redundant paths.
● PoE and PoE+ (802.3af, 802.3at)
○ Power over Ethernet (PoE) is a system dedicated to powering and transmitting data over twisted pair
Ethernet cabling. The main difference between PoE and PoE+ is the power provided. Needless to say,
PoE+ is much more.
● DMZ
○ The ​demilitarized zone (DMZ)​, a term taken from the military, is the physical or logical subnetwork. It is
the interface between the local area network (LAN) and the Internet. This includes devices like public
servers, resources, or servers.
● MAC Address Table
○ The MAC Address Table identifies where to forward traffic on a LAN for Ethernet switches.
● ARP Table
○ Address Resolution Protocol Table​ (ARP Table) correlates MAC addresses to corresponding IP
addresses.

Routing
● Routing protocols (IPv4 and IPv6)
○ Routing protocols are used to identify routes on the network, create routing tables, and make routing
decisions.
○ Distance-vector routing protocols
■ Distance vector routing protocols use the hop count to determine the best route to take. This
protocol will continuously send neighboring routers a copy of its routing table to make sure they
are aware of the latest.
○ RIP
■ Routing Information Protocol (RIP) is a distance vector routing protocol that uses the hop count
to determine the best path.
○ EIGRP
■ Enhanced Interior Gateway Routing Protocol (EIGRP) is a distance vector routing protocol able
to automate routing decisions and configurations. It is only available on Cisco routers.
○ Link-state routing protocols
■ Link-state routing protocols is the yang to distance-vector routing protocols yin. Link state
routing happens at every switching node in the network, where switching nodes on the Internet
 are also known as routers. Each node creates a map of the other nodes they are connected to
and calculates the best and most logical path for the packet to take.
○ OSPF
■ Open Shortest Path First is a routing protocol that uses link state routing. OSPF is a common
IGP used in larger enterprise networks.
○ Hybrid
■ The Hybrid Routing Protocol is a combination of distance vector routing and link state routing. It
uses distance vectors for the most accurate distance metrics, but only sends routing information
when there is a change in network topology. This requires less processing power than typical
link-state routing.
○ BGP
■ Border Gateway Protocol (BGP) is an exterior gateway protocol for transmitting routing and
reachability information between autonomous systems.
● Routing types
○ Static
■ Static routing is routing that requires the manual configuration of a routing entry. They are
typically configured by network administrators, who add entries to a routing table.
○ Dynamic
■ In contrast, dynamic routing adapts to the existing conditions between communication circuits to
avoid existing damages to the network.

IPv6 Concepts
● Addressing
○ IPv6 addressing is how we interface with and find a device on the network. IP addresses get
transmitted in packet headers as the source and destination of a particular packet.
● Tunneling
○ IPv6 tunneling​ is how to use the routing infrastructure from IPv4 for IPv6 traffic. Basically, this comes
down to encapsulating IPv6 datagrams within IPv4 packets.
● Dual stack
○ Dual stack​ refers to creating a system where devices may run IPv4 and IPv6 simultaneously. This is
particularly important as organizations transition from IPv4 to IPv6.
● Router advertisement
○ Router Advertisement Daemon (RADVD)​ is a way of automatically configuring devices joining the
network for IPv6. If this is enabled, autoconfiguration of the device’s IPv6 address, subnet prefix, and
default gateway can occur. If it is disabled, this must be done manually, typically by the network
administrator.
● Neighbor discovery
○ The Neighbor Discovery Protocol (NDP)​ gathers information for Internet communication. This can
include configuration information for local connections, domain name servers, and gateways for
connecting with other systems.

Performance Concepts
● Traffic shaping
○ Traffic shaping​ prioritizes bandwidth based on the type of network packet. Network packets with higher
priority are ensured better network performance.
● QoS
 ○ Quality of Service (QoS) is the quantitatively measured performance of the network. It can be based on
packet loss, bit rate, throughput, transmission, availability, delay, jitter, or more.
● DiffServ
○ Differentiated Services (DiffServ)​ is a networking architecture for managing network traffic and ensuring
QoS.
● CoS
○ Class of Service (CoS) is the parameter for assigning priorities to packets on the network.

Other Concepts
● NAT/PAT
○ Network Address Translation (NAT) is the way to remap an IP address space into another. It involves
altering the network address information, which is in the IP header of the packets, while they are
moving across a traffic routing device.
○ Port Address Translation (PAT) is the equivalent of NAT, but with ports. It is the way to translate ports.
● Port forwarding
○ Port forwarding is an application of NAT where not only is the IP address space remapped, but the port
number is as well. This lets devices on the Internet connect to devices on a LAN.
● Access control list
○ An ​access control list​ is a list of conditions to filter network traffic.
● Distributed switching
○ Distributed switching​ is where a distributed switch acts as the sole virtual switch. It is used to maintain
consistent network configurations as VMs move around several hosts.
● Packet-switched vs. circuit switched network
○ Packet-switched networks​ move data via packets. These packets can be sent in any order, as they are
rearranged at the destination based on information in the packet header. In contrast, circuit-switched
networks require point-to-point connections that are consistent and maintained until the data is
transmitted. With circuit-switched networks, an entire channel must be dedicated to a single interaction.
In contrast, packet-switched networks can maintain a single channel for multiple communications
simultaneously.
● Software-defined networking
○ Software-defined networking (SDN)​ is a method of network management where the network
configuration is dynamically upgraded to be the most efficient possible. THe goal is to improve network
performance and monitoring.

Helpful Definitions
● MAC
○ Medium Access Control (MAC) controls hardware that interacts wired, optical, or wireless
transmissions. The data link layer is made up of the MAC layer and the logical link control (LLC) layer.
● Carrier wave
○ A carrier wave is used to send information at a higher frequency than the input signal, so it can allow
several different carriers to transmit at once on the same transmission medium.
● Multiple Access Method
○ The multiple access method is a method that lets more than two terminals share one transmission
method.
● Ethernet over twisted pair
 ○ Ethernet over twisted pair are twisted pair cables used for the physical layer of an Ethernet computer
network.
● Interior Gateway Protocol
○ The Interior Gateway Protocol (IGP) is a protocol used to exchange router information. IGPs are
divided into distance vector routing protocols and link-state routing protocols.
● Autonomous Systems
○ An autonomous system (AS) is a group of routers where their prefixes and routing policies are all
controlled by the same administrator. This may be a Network Service Provider, a large business, a
university, or other larger organizations.

1.4 Given a scenario, configure the appropriate IP addressing components.

● Private vs. public
○ A private IP address is the address a device uses to communicate within their network.
○ A public IP address is the address used to communicate publicly outside of the local network.
● Loopback and reserved
○ Loopback​ is the range of IP addresses reserved for the localhost address. It is entirely maintained on
the device’s operating system.
○ Reserved IP addresses are addresses that have been reserved by the IETF and the IANA for special
purposes.
● Default gateway
○ A default gateway​ is a device on the network that forwards packets to other networks and eventually on
to their destination. A router is an example of a default gateway.
● Virtual IP
○ A Virtual IP address (VIP)​ is an IP address that isn’t actually for a physical network, but instead is used
for things like NAT and fault tolerance.
● Subnet mask
○ A Subnet mask​ is what separates an IP address into network and host addresses. This takes the form
of <network><subnet><host> to give additional subnetworks.
● Subnetting
○ Classful
■ Classful networks​ divide the IPv4 address space into five different classes: A, B, C, D, and E.
■ Classes A, B, C, D, and E
● Class A: Class A contains all addresses where the most significant bit is 0; this can
accommodate 128 networks.
● Class B: Class B contains all addresses where the two most significant bits are 1 and 0;
this can accommodate 65,536 addresses per network.
● Class C: Class C contains all addresses where the three most significant bits are 1, 1,
and 0; this can accommodate 256 local addresses.
● Class D: Class D is reserved for multicasting and contains all addresses where the four
most significant bits are 1, 1, 1, and 0.
● Class E: Class E is reserved for experimentation only and ranges from 240.0.0.0 to
255.255.255.254.
○ Classless
■ VLSM
● Variable-length Subnet Masks (VLSMs)​ use more than one mask for the same classful
network. AKA, VLSMs subnet the subnet.
■ CIDR notation (IPv4 vs. IPv6)
 ● Classless Inter-Domain Routing (CIDR)​ is a method of allocating IP addresses
introduced by the IETF. It was meant to replace classful networks and reduce the
exhaustion of IPv4 addresses. CIDR is based on VLSM.
● Address assignments
○ DHCP
■ There are three different ways DHCP assigns IP addresses:
● Automatic Allocation: DHCP servers assign a permanent IP address from their dedicated
IP Pools.
● Dynamic Allocation: DHCP servers assign a reusable IP address from their dedicated IP
Pools. This only lasts for a set amount of time and is known as a lease.
● Static Allocation: Static allocation occurs when the network administrator manually
assigns an IP address, which the DHCP server is then responsible for sending along to
the client. These are permanent.
○ DHCPv6
■ Dynamic Host Configuration Protocol version 6 (DHCPv6)​ is the IPv6 equivalent of DHCPv4.
■ Manual
● A manual assignment is typically completed by a network administrator, but this can be
error-prone.
■ Stateless Address Autoconfiguration
● Stateless Address Autoconfiguration (SLAAC) is a way to assign IP addresses without
needing a network administrator. Instead, the admin configures the router, which then
sends Router Advertisement announcements to the devices on the network. This lets the
devices configure themselves.
■ Stateful DHCPv6
● Stateful DHCPv6 is a counterpart to Stateless Address Autoconfiguration that allows
configuration parameters to be passed to IPv6 nodes.
■ DHCPv6-PD
● DHCPv6 Prefix Delegation (DHCPv6-PD) is used to assign a complete subnet from a
DHCPv6-PD server to a DHCPv6-PD client. Instead of a single address assignment,
DHCPv6-PD assigns an entire set of IPv6 subnets.
■ Stateless DHCPv6
● Stateless DHCPv6 uses SLAAC to assign IPv6 addresses and DHCPv6 to add more
parameters like DNS or NTP server addresses.
○ Static
■ Static IP addresses are IP addresses that have been manually configured, typically by a
network administrator.
○ APIPA
■ Automatic Private IP Addressing (APIPA)​ is a way for a device on the network to discover an
address on its own. When getting an IPv4 address, the device can select an address at random
between 169.254.1.0 to 169.254.254.255 with a netmask of 255.255.0.0. The device sends an
ARP packet for the MAC address associated with the IP address, and if it is not accepted
(because the address is already taken), it will try a new IP.
○ EUI64
■ Extended Unique Identifier (EUI64)​ is a way of automatically configuring IPv6 host addresses.
This is meant to eliminate the need for manual configuration or DHCP, popular methods in IPv4.
○ IP reservations
■ With IP reservations, IP addresses are automatically assigned and managed without requiring
addresses be set aside for exclusive use by certain devices. IP addresses are reserved and
 associated with a unique MAC address, so when a device requests an IP renewal, they may get
the same IP.

Helpful Definitions
● Internet Engineering Task Force
○ The Internet Engineering Task Force (IETF) is an organization that establishes standards for the
Internet, especially when it comes to TCP/IP.
● Internet Assigned Numbers Authority
○ The Internet Assigned Numbers Authority (IANA) oversees global IP address allocation, Internet
numbers, number allocation, root zone management, and other IP protocol-related systems.
● ARP
○ Address Resolution Protocol (ARP)​ is used to map IP addresses to their Ethernet addresses. ARP
packets typically start a conversation between two devices.
● Stateful vs Stateless
○ Stateful IP addresses provide a log that certain IP addresses were assigned to a specific MAC address.
○ Stateless IP addresses are more dynamic and are used to determine a device’s IP address at the time
for that particular network.

1.5 Compare and Contrast the Characteristics of Network Topologies, Types,

and Technologies
● Wired Topologies
○ The actual physical layout of the cables that connect computers on the network.
○ Logical vs Physical
■ A logical topology is a way of visualizing the network with respect to how data flows, as opposed
to what it actually may ​look like.
■ A physical topology is how the network is actually physically laid out, across network cables and
devices.
○ Star
■ In a star topology, each device is connected to a central access point.
○ Ring
■ In a ring topology, each device is connected to the other devices in the network in a ring. This is
considered an obsolete network topology.
○ Mesh
■ In a mesh topology​, each device on the network connects directly to any other device on the
network. In the past, this needed to be wired, which made it expensive and difficult to sacale.
○ Bus
■ In a bus topology, each device is connected linearly to the next, starting at the server and
ending with the last device on the network. This is considered an obsolete network topology.
● Wireless Topologies
○ Mesh
■ In a mesh topology​, each device on the network connects directly to any other device on the
network. These connections are non-hierarchical, and this type of network self-organizes and
self-configures to efficiently route data.
○ Ad hoc
 ■ A wireless ad hoc network (WANET)​ is a decentralized network that does not have a defined
infrastructure. Each device on the network works together to pass data based on routing
algorithms and network connectivity.
○ Infrastructure
■ An infrastructure wireless topology is centralized. Specific devices are used as access points for
other devices on the network.

Network Types by Spatial Scope, ​Michel Bakni

Network Acronym Network Type Description

LAN Local area network A ​local area network ​(LAN) is a network that connects
devices in a small (or ​local​) area, such as a house, over
Ethernet.

WLAN Wireless local area network A ​wireless local area network​ (WLAN) is a network that
connects devices in a local area. It differs from a traditional
LAN because it uses Wi-Fi instead of Ethernet.

MAN Metropolitan area network A ​metropolitan area network​ (MAN) is a network that
connects devices in a larger geographic region the size of a
metropolitan area.

WAN Wide area network A ​wide area network​ is a network that connects devices
across a large geographic area. A WAN can connect smaller
networks like MANs and LANs, so devices can communicate
across vast locations.

CAN Controller area network A ​controller area network​ (CAN bus) is a standard for
microcontrollers that lets them communicate without a host.
When a device communicates, the communication is sent to
all devices, including itself.

SAN Storage area network A ​storage area network​ (SAN) is a high-speed network for
easy access to storage. Storage devices are presented to the
host as though they are attached locally, which can be used
for business continuity management.
 PAN Personal area network A ​personal area network​ (PAN) is a network for connecting
an individual’s devices together.

● Technologies that facilitate IoT

○ Z Wave
■ Z Wave​ is a mesh network communications protocol that uses low-energy radio waves to help
home automation devices communicate.
○ ANT+
■ Advanced Network Topology​ (ANT+) is a low-power version of ANT. ANT+ and ANT are
wireless network technology to allow sports sensors to communicate. The technology is owned
by a division of Garmin Canada, though it is open access.
○ Bluetooth
■ Bluetooth​ is a well-known wireless technology that allows devices to communicate with each
other at a short range. A lot of technology used every day uses Bluetooth, like Bluetooth
headphones.
○ NFC
■ Near-field Communication​ (NFC) is a communications protocol that allows devices to
communicate with each other at an incredibly short range, 1.5 inches or less. NFC is very
common with touchless payment systems and some keycards.
○ IR
■ Infrared​ (IR) is a wireless technology used to send data through infrared radiation. It’s often
used in intrusion detection, for cordless headsets, and for printers. IR cannot travel through
walls, which limits its implementation capabilities.
○ RFID
■ Radio frequency identification​ (RFID) uses electromagnetic fields to identify objects. RFID tags
contain a radio transponder that can be triggered from an electromagnetic pulse from a RFID
reader, which transmits information identifying the object. RFID tags are used in a lot of
applications and have faced privacy concerns.
○ 802.22
■ IEEE 802.22​ is a wireless regional area network (WRAN) standard. It uses unused sections of
TV broadcast frequency to communicate, in order to give broadband access to low population
density, rural areas.

1.6 Given a Scenario, Implement the Appropriate Wireless Technologies and

Configurations
802.11 is the IEEE wireless networking standard. Variations differ in terms of speed, data rates, frequency, and other
factors, but they are all implemented in a similar way: ad hoc or infrastructure topologies.

IEEE Standard Frequency Data Rate Range (ft)

(Mbps)

802.11 2.4 GHz RF 1 - 2 Mbps 20 ft

802.11a 5 GHz 54 Mbps 25 - 75 ft

802.11b 2.4 GHz 11 Mbps 150 ft

802.11g 2.4 GHz 54 Mbps 150 ft

802.11n 2.4 GHz/ 5 GHz 600 Mbps 175 ft

802.11ac 5 GHz 2.5 Gbps 175 ft

​ earson.​
Data collected from P

● Cellular
○ GSM
■ The ​Global System for Mobile Communications​ (GSM) is a standard developed by the ETSI for
second-generation (2G) cellular networks. It became the global standard for mobile
communications with over 90% market share.
○ TDMA
■ Time-division multiple access​ (TDMA) is a cellular communications technology to ensure
multiple individuals can use the same frequency without interference.
○ CDMA
■ Code-division Multiple Access​ (CDMA) is a channel access method, whereby several devices
can communicate over the same channel at the same time.
● Frequencies
○ 2.4 GHz
■ 2.4 GHz​ transmits data slower, but has a large range.
○ 5.0 GHz
■ 5.0 GHz​ transmits data quickly, but has less range. The higher the frequency, the faster the
data transmission. Its range is largely limited by its inability to pass through solid objects.
● Channel Bandwidth
○ Channel bandwidth​ changes the data transmission rate; higher bandwidth means faster connection.
● Channel Bonding
○ Channel bonding​ combines two channels with the same frequency to increase throughput. It is very
common in Wi-Fi applications.
● MIMO/MU-MIMO
○ Multiple input, multiple output (MIMO) and multi-user, multiple output (MU-MIMO)​ are wireless network
technology. MU-MIMO is the next evolution of MIMO, which enables devices with multiple antennas to
communicate with one another. MIMO solely allowed a single antenna to communicate with another
single antenna.
● Unidirectional/omnidirectional
○ A ​unidirectional network​ is a device that only allows data to flow in a single direction. This is commonly
used in military bases, nuclear power plants, and other critical infrastructure, that need to ensure
security. This is also known as a data diode.
○ An ​omnidirectional antenna​ is a type of antenna that sends equal radio power in every direction
perpendicular to the antenna. This creates a donut-like radiation pattern.
● Site surveys
○ A ​wireless site survey​ is a way of designing a wireless network such that it will meet QoS, data rates,
and coverage requirements.
Helpful Definitions
● ETSI
○ The ​European Telecommunications Standards Institute​ (ETSI) is a standardization organization for
telecommunications.
● Channel Access Method
○ A ​channel access method​ ensures that two devices can communicate over the same transmission
medium at the same time.

1.7 Summarize cloud concepts and their purposes

● Types of services
○ SaaS
■ Software-as-a-Service​ (SaaS) is a form of cloud computing and a software distribution model. A
third-party hosts applications for end users, typically for a subscription fee.
○ PaaS
■ Platform-as-a-Service ​(PaaS) is a form of cloud computing and an architecture wherein a
third-party hosts a platform for end users, typically for a subscription fee. Users can develop,
run, and manage business applications, all using the third-party infrastructure.
○ IaaS
■ Infrastructure-as-a-Service​ (IaaS) is a form of cloud computing and an architecture wherein
virtualized computing resources are provided by a third-party to a user, typically for a
subscription fee.
● Cloud delivery models
○ Private
■ Private clouds​ are a cloud delivery model where an organization can keep the necessary
hardware locally managed. Access to applications in the private cloud can happen from
anywhere, but the workloads are managed by the organization and delivered over WAN.
○ Public
■ Public clouds​ are a cloud delivery model where an organization uses a third-party for the
physical hardware of their servers. IT staff can easily provision new cloud resources, which is
why public clouds often follow a pay-as-you-go model.
○ Hybrid
■ Hybrid clouds​ are a h ​ ybrid​ of private and public clouds. They are cloud delivery models where
third-party resources are accessible, but are used to augment a private cloud.
● Connectivity methods
○ Cloud connectivity methods are the different ways to connect to cloud providers.
○ VPN
■ A virtual private network​ (VPN) gives a device an encrypted connection to a server over the
Internet.
● Positives: VPNs are encrypted, and VPNs give IT admins a lot of control over who can
access the network.
● Negatives: slow data speeds and increased network complexity, which means it is more
difficult for IT teams to support.
○ RDS
 ■ A remote desktop server​ (RDS) is a user interface for interacting with a server; all data is stored
remotely, and every user interaction is sent back to the server.
● Positives: RDS has low bandwidth requirements and few servers are needed.
● Negatives: all users have the same interface, which limits customization, and there can
be security concerns given that all users are accessing the same server.
○ VDI
■ A virtual desktop infrastructure​ (VDI) is a dedicated space on a server for each user, much like
RDS, except VDI allows for individual configuration of the user interface.
● Positives: users get a customized interface, less storage capacity is required, and
applications, patches, and drivers are all managed centrally.
● Negatives: Compute requirements are high, and licensing costs are high.
● Security implications and considerations
○ Lack of Control
■ The biggest security implications​ from cloud computing seem to stem from one source: lack of
control. As assets are moved to public clouds, organizations simply have less control over them.
They are trusting another organization to manage their assets.
○ New, Unapproved Services
■ The cloud enables easy provisioning of new services, which means the IT department does not
necessarily know or approve the cloud services a user is running.
○ Malware Infections
■ Given the amount of data​ organizations are storing on the cloud and the number of users
accessing it, malware infections become more likely.
○ Compliance Issues
■ The cloud makes it easy to access a lot of data at once. This can pose issues for organizations
that must meet HIPAA regulations, or GDPR.
● Relationship between local and cloud resources
○ Local Resources
■ Positives: Inexpensive, easy to use, and the data is 100% under the organizations control (for
compliance and security purposes).
■ Negatives: Need to house the hardware, need to have fail safes in case the hardware fails, can
potentially be stolen. The organization is entirely responsible for the security and management
of the hardware.
○ Cloud Resources
■ Positives: Easily connect over the Internet, no physical storage necessary, small amounts of
data can be stored for free or very low cost.
■ Negatives: Can be expensive depending on the resource usage, requires an internet connection
to access, may be difficult to ensure compliance.

1.8 Explain the functions of network services

● DNS service
○ A ​DNS hosting service​ is the service that runs domain name system servers. The vast majority of
domain name registrars include DNS hosting on registration.
○ Record types
■ A, AAAA
● A records​ are the most common kind of DNS record. They are used to translate domain
names into IP addresses. Type A records are for Ipv4, while ​type AAAA​ are for IPv6.
 ■ TXT (SPF, DKIM)
● TXT records​ have text about a domain name, like the host, the main contact, and
associated information.
● Sender Policy Framework (SPF) serves as an email authentication process to prevent
spam.
● DomainKeys Identified Mail (DKIM) serves as an email authentication process so
organizations may use public key cryptography to verify a message is sent from an
authorized mail server.
■ SRV
● SRV records​ are used to state the location of a service, in three parts: service, protocol,
and domain name. The actual service location is of four parts: priority, weight, port, and
target.
■ MX
● Mail exchange records (MX)​ identify the email server associated with a particular domain
name. MX records contain: the name of the email server and a number that decides
preference for that server.
■ CNAME
● CNAME records​ are aliases for the particular domain name.
■ NS
● NS records​ identify which DNS servers correspond to which zone.
■ PTR
● PTR records​ translate IP addresses to domain names. They are often known as ‘reverse
records’ from A and AAAA records.
○ Internal vs external DNS
■ An external DNS server​ is responsible for public DNS queries to a particular network.
■ An internal DNS server​ is responsible for not only the public DNS information about a particular
network, but also additional information on internal hosts and services.
○ Third-party/cloud-hosted DNS
■ Third-party/cloud-hosted DNS​ is considered IaaS, basically a managed DNS server. They can
benefit organizations by providing geographically diverse infrastructure and a reduction in cost,
depending.
○ Hierarchy
■ The DNS hierarchy is responsible for managing a domain and its subdomains. It is a distributed
database system in an inverted tree structure. Each domain name is an entity’s position in the
DNS hierarchy.
○ Forward vs reverse zone
■ A forward lookup​ is when a DNS looks up the IP address of a device based on the hostname
value.
■ A reverse lookup​ is when a DNS looks up the hostname based on the IP address.
● DHCP service
○ MAC reservations
■ DHCP reservations​ - specifically MAC reservations - ensure the IP address for the devices on
your network use the same IP address consistently.
○ Pools
■ DHCP address pools​ are pools of IP addresses that the device managing the network can use
to assign a client an address.
○ IP exclusions
 ■ IP exclusions​ are the IP addresses that are excluded from being assigned to client devices.
Exclusions are based on which IP addresses are already assigned, therefore they will never be
assigned automatically to any client devices.
○ Scope options
■ DHCP scope​ is the set of IP addresses that can be assigned to client devices. The scope
options include the DNS server, domain name, and gateway.
○ Lease time
■ DHCP lease time​ is the time a device has to use the IP address it has been assigned. After that
lease time, if the device is no longer connected, the address expires and is reassigned
elsewhere.
○ TTL
■ Time-to-live (TTL) ​is the set amount of time or number of hops before a packet is removed from
the network. This is important for those instances where a packet gets “lost” on the network, or
to track information on a packet such as how long it has been in transit.
○ DHCP relay/IP helper
■ A ​DHCP relay​ is a host or router responsible for forwarding packets to other devices on the
network.
■ IP helpers​ allow devices to act as a middle man to forward DHCP requests to the requested
server.
● NTP
○ The ​Network Time Protocol (NTP)​ is a network protocol to synchronize clocks between devices to
within a few milliseconds of Coordinated Universal Time. ​NTP servers​ are servers that help in that effort
and that can be queried by other devices. This is considered a foundational network service.
● IPAM
○ IP Address Management (IPAM)​ encompasses how IP address space used in a network is planned,
tracked, and managed. This typically involves the use of DNS and DHCP in tandem.

Helpful Definitions
● Zone
○ A zone is a domain, not including the subdomains delegated to other DNS servers.

Thanks again for downloading this PDF. I hope it was useful for you.
If you have any questions about this,​ head to my website hackerbella.xyz​ and comment on the blog. I’m
happy to help.
- ​Allie Mellen