Specification and product images may change without notice 1

DRILL PRESS
Max. Drilling Cap 25mm
Max. Drilling Cap 16mm
Included Accessories :
1. Drill Chuck With Key
2. Drill Chuck Arbor
3. Drift Key
4. Drill Chuck Safety Guard Max. Drilling Cap 16mm

Max. Drilling Cap 13mm

Max. Drilling Cap 13mm

10063882 10063883 10063884 10063885 10063886

Features :
• On/Off Switch with Emergency Stop
• Solid Casting
• Tilting Work Table

Article No. Model No. Description Table size (L x W) (mm) Unit size (L x W x H) (mm) GW/NW (kg)
10063882 ORDP1320 Drill Press 13 x 200mm DD1320CA 160 x 160 270 x 460 x 580 20 / 19
10063883 ORDP1335 Drill Press 13 x 350mm DD1335CA 200 x 195 310 x 570 x 830 37 / 36
10063884 ORDP1639 Drill Press 16 x 390mm DD1639CA 270 x 270 600 x 350 x 990 52 / 49
10063885 ORDP1678 Drill Press 16 x 780mm DD1678CA 270 x 270 600 x 350 x 1570 56 / 53
10063886 ORDP2572 Drill Press 25 x 725mm DD2572CA 330 x 330 400 x 700 x 1680 93 / 90

2 Specification and product images may change without notice

DRILL GRINDER

Optional Accessories
Diamond Wheel:

10139409 10190557
10119230 for 10119230 for 10119231
10119231
Features :
• Simple setting
• Fast & constant invariable grinding
• Highly efficient

Article No. 10119230 10119231

Model No. ORDG1301 ORDG3001
Description ER 20 Precision Drill Grinder Set (11pcs) ER 40 Precision Drill Grinder Set (14pcs)
Specification
Motor (kW / V / Ph) 0.18 / 220 / 1 0.45 / 220 / 1
Grinding Wheel Speed (rpm) 5300 5000
Drill Diameter (mm) Ø2 – Ø13 Ø3 – Ø30
Angle of the tip sharpening (°) 90° - 135° 90° - 145°
Dimension (L x W x H) (mm) 310 x 180 x 190 450 x 240 x 270
Weight (kg) 9.5 33

ENDMILL GRINDER

Tool holder :
2 Flute 3 Flute 4 Flute

No3 :
Adjust screw : For cutting angle 6°
For dull or sharp

Checking stock : No1 :

For Checking endmill For Endmill flat
parallel with holder unit slot angle 30°

No2 : Parallel type Hex. type Square type

For radial angle 20°
No2 No3
20° 6°
Features :
• Simple setting
• Fast & constant invariable grinding No1
• Highly efficient 30°

Article No. 10020247 10008909

Model No. OREG1301 OREG2501
Description ER-20 Precision Endmill Grinder Set 4-13mm (10pcs) ER-40 Precision Endmill Grinder Set 12-25mm (6pcs)
Specification
Motor (kW / V / Ph) 0.4 / 220 / 1 1 / 220 / 1
Motor Speed (rpm) 6000 4300
Endmill Diameter (mm) Ø4, Ø5, Ø6, Ø7, Ø8, Ø9, Ø10, Ø11, Ø12, Ø13 Ø12, Ø16, Ø18, Ø20, Ø25
Cutting Angle (°) 6° 6°
- SDC 300 x 1
Grind Wheel SDC 150 x 1
- SDC 270 x 1
Dimension (L x W x H) (mm) 320 x 260 x 300 365 x 293 x 345
Weight (kg) 17 31

Specification and product images may change without notice 3

 SCROLL SAW

Optional Accessories:

Accessories Included:
Features :
• Saw adapter
• Flexible shaf Blade (10082261/10082240)
• Gooseneck lamp

Article No. 10055520

Model No. ORSS1602
Description Scroll Saw 16” 90W 220V
Specification
Motor (V/Hz/W) 230 / 50 / 90
Table Tilt (°) 0º- 45º
Max. Thickness Workpiece (mm) 50
Table Size (mm) 415 x 255
Dimension (L x W x H) (mm) 620 x 300 x 400
Weight (kg) 24

TABLE SAW
Optional Accessories:

Blade (10082118) Blade (10082119)

Features :
• Blade tilt up to 45° via hand wheel
• Easy operation
• For D.I.Y use

Article No. 10063894

Model No. ORTS8010
Description Table Saw 80 x 10”
Specification
Motor Power (V/Hz/W) 220/ 50/ 1500
Circular Saw Size Ø254 (10 inch) 40T
Max. Cutting 90º (mm) 80
Max. Cutting 45º (mm) 55
Main Table Size (mm) 638 x 430
Dimension (L x W x H) (mm) 800 x 850 x 900
Weight (kg) 62

4 Specification and product images may change without notice

WOOD BANDSAW

10
inch Optional spare blade:

8
10199689 for 8 inch
inch 10199691 for 10 inch

Features :
• Safety switch in upper and lower doors
• Include mitre gauge and rip fence
• Tiliting table

Article No. 10433060 10433061

Model No. ORBSM08 ORBSM10
Description Wood Bandsaw 8” Wood Bandsaw 10”
Specification
Motor Power (V / Hz / W) 220 / 50 / 250 220 / 50 / 370
Bandsaw Wheel Dia
200 (8”) 255 (10”)
(mm) (”)
Max. Thickness
80 100
Workpiece (mm)
Table Size (°) 300 x 300 340 x 335
Blade Size (mm) 1400 1712
10433060 10433061
Dimension (L x W x H) (mm) 700 x 400 x 310 680 x 710 x 110
Weight (kg) 15.5 23

PLANNER THICKNESSER Optional spare blade (10217417):

Article No. 10188402

Model No. ORPTM1005
Planner Thicknesser 10 x 5”
Description
150W 220V
Specification
Motor Power (V / Hz / W) 220 / 50 / 1500
Planing Table Size (mm) 920 x 263
Thicknessing Table Size (mm) 270 x 303
Max cutting depth (mm) 2
Cutter Block Speed (rpm) 9000
Cutting Knife (pcs) 2
Dimension (L x W x H) (mm) 954 x 494 x 483
Weight (kg) 31.5

MINI LATHE
Optional Accessories:

Features :
• Made of cast iron bed
• Compact design
• Include a gooseneck work light

Article No. 10051715

Wood Turning Chisel Set
10190556 Model No. ORML1218
Description Mini Lathe 12” x 18” 600W 1PH
Specification
Motor Power (V / Hz / W) 220 / 50 / 600
Max. Swing Over Bed (mm) 305
Max. Length (mm) 450
Speed (rpm) 680, 1000, 1430, 2000, 2800
Dimension (L x W x H) (mm) 800 x 350 x 450
Weight (kg) 38

Specification and product images may change without notice 5

 BENCH ROUTER MACHINE

Article No. 10183263

Model No. ORRM5001
Description Bench Router Machine 1500W
Specification
Motor Power (V / Hz / W) 220 / 50 / 1500
Speed (Rpm) 11500 - 24000
Router cutter shank Dia (mm) 6 / 8 / 12
Max cutter block Dia (mm) 50
Table size (mm) 610 x 360
Extention table (mm) 210 x 360
Dimension (L x W x H) (mm) 1030 x 360 x 311
Weight (kg) 23

WOOD WORKING
DRUM SANDER

Features :
• Rubber feed mat
• Handle and wheel kit included for easy moving unit
• In and out extension table included

Article No. 10051717

Model No. ORDS1601
Description Drum Sander 16” 1.5kW 1PH
Specification
Motor Power (V / Hz / W) 220 / 50 / 1500
Max. Sanding Width (mm) 405
Max. Workpiece Heigth (mm) 130
Drum Size (mm) 132 x 410
Drum Speed (rpm) 1440
Maximum Sanding Depth (mm) 5
Dimension (L x W x H) (mm) 1030 x 1000 x 1030
Weight (kg) 85

6 Specification and product images may change without notice

DUST COLLECTOR

1,5 3
HP HP
1
HP

10051718 10051719 10051720

5 7
HP HP

Also available accesories for dust collector:

10084325 10084323
Cartridge Filter Cotton Bag
for Finnest Dust

10084324 10084326
Plastic-Bag Cap 4”
10051721 10051722

Article No. Model No. Description Number Of Intake Hole Motor (V / Hz / W) Unit size (L x W x H) (mm) Weight (kg)
10051718 ORDC0101 Dust Collector 1HP 1PH 1 x 100 (4”) 220 / 50 / 750 800 x 400 x 1500 24
10051719 ORDC1501 Dust Collector 1.5HP 1PH 2 x 100 (4”) 220 / 50 / 1250 940 x 700 x 1950 41
10051720 OPDC0303 Dust Collector 3HP 3PH 3 x 100 (4”) 380 / 50 / 2250 1500 x 750 x 1950 52
10051721 OPDC0503 Dust Collector 5HP 3PH 4 x 100 (4”) 380 / 50 / 3750 2150 x 700 x 2350 85
10051722 OPDC0703 Dust Collector 7HP 3PH 4 x 100 (4”) 380 / 50 / 5250 2700 x 700 x 2350 100

Specification and product images may change without notice 7

 CASTING ANVIL

Features :
• Cast Iron build
• 4 base lugs for permanent fixing

Unit size Weight

Article No. Model No. Description
(L x W x H) (mm) (kg)
KW0400366 ORBVA1105 Casting Anvil Bench Vise 11 lbs 500 x 250 x 190 4.8
KW0400367 ORBVA2411 Casting Anvil Bench Vise 24 lbs 330 x 300 x 220 11
KW0400368 ORBVA5525 Casting Anvil Bench Vise 55 lbs 400 x 180 x 200 25
KW0400369 ORBVA7534 Casting Anvil Bench Vise 75 lbs 430 x 210 x 240 34

BENCH VISE
Features :
• Designed for professional
• Cast iron body with reinforced stressed point
• 120° swivel base

Unit size
Width of Weight
Article No. Model No. Description (L x W x H)
Jaws (mm) (kg)
(mm)
Bench Vise 4” with
KW0400035 ORBV0404 100 710 x 350 x 190 11.25
Swivel Base
Bench Vise 5” with
KW0400036 ORBV0505 125 450 x 200 x 250 20
Swivel Base
Bench Vise 6” with
KW0400037 ORBV0606 150 520 x 220 x 270 30
Swivel Base
Bench Vise 8” with
KW0400038 ORBV0808 200 600 x 250 x 300 47
Swivel Base

AMERICAN BENCH VISE C - Throat Depth

B - Jaw Opening

D - Large Anvil
Precision casting
body powder
coating finish
High Quality steel
plate for beam
Polished

A - Width Jaw

360o Swivel base

E - Clamp round
object use

Width of Unit size

Weight
Article No. Model No. Description Jaws (L x W x H)
(kg)
(mm) / (inch) (mm)
American Bench Vise
KW0400362 ORBVAS0404 4” with 360o Swivel 100 / 4” 360 x 310 x 220 12.20
Base
American Bench Vise
KW0400363 ORBVAS0505 5” with 360o Swivel 125 / 5” 430 x 190 x 230 16.20
Features : Base
• Cast Iron build
American Bench Vise
• 4 base lugs for permanent fixing
KW0400364 ORBVAS0606 6” with 360o Swivel 150 / 6” 460 x 230 x 280 25.20
Base

8 Specification and product images may change without notice

MULTI PURPOSE BENCH VISE TABLE VISE

Features :
• Precission casting body and powder coating
finihsed.

KW0400365

KW0400039

Article No. Model No. Description Width of Jaws (mm) Unit size (L x W x H) (mm) Weight (kg)
KW0400039 ORBVM0505 Multi Purpose Bench Vise 5” 125 510 x 260 x 260 28
KW0400365 ORTV0202 Table Vise 2”, Double Tail Type 50 200 x 180 x 80 2.7

DRILL VISE STANDARD

Features :
• Precission casting body and powder coating finihsed.

Width of Unit size Weight

Article No. Model No. Description
Jaws (mm) (L x W x H) (mm) (kg)
KW0400185 ORDV2525 Drill Vise Standard Type 2.5” 65 260 x 230 x 200 1
KW0400186 ORDV0303 Drill Vise Standard Type 3” 75 300 x 280 x 250 2
KW0400187 ORDV0404 Drill Vise Standard Type 4” 100 370 x 340 x 300 3.1
KW0400188 ORDV0606 Drill Vise Standard Type 6” 150 390 x 240 x 380 3.5

DRILL VISE QUICK

Features :
• Precission casting body and powder coating finihsed.

Unit size
Width of Jaws Weight
Article No. Model No. Description (L x W x H)
(mm) (kg)
(mm)
KW0400189 ORDV0303Q Drill Vise Quick Type 3” 78 320 x 300 x 220 2

KW0400190 ORDV0404Q Drill Vise Quick Type 4” 100 370 x 350 x 260 3

KW0400191 ORDV0606Q Drill Vise Quick Type 6” 150 400 x 250 x 320 3

Specification and product images may change without notice 9

 ACCU-LOCK PRECISION MACHINE VISE

Features :
• Cast iron construction
• Crank handles for adjusting vise front to back

Width of Jaws Unit size Weight

Article No. Model No. Description
(mm) (L x W x H) (mm) (kg)
Accu-Lock Prec MachineVise
KW0400309 ORMV0404 100 360 x 240 x 140 17
100mm, 100mm Opening
Accu-Lock Prec MachineVise
KW0400310 ORMV0606 160 470 x 150 x 300 33
160mm, 170mm Opening
Accu-Lock Prec MachineVise
KW0400311 ORMV0808 200 560 x 160 x 290 54
200mm, 210mm Opening

DRILL VISE CROSS

Features :
• Cast iron construction
• Crank handles for adjusting vise front to back and left to right

Unit size
Width of Jaws Weight
Article No. Model No. Description (L x W x H)
(mm) (kg)
(mm)
KW0400192 ORDVC0303 Drill Vise Cross Type 3” 80 240 x 240 x 140 6
KW0400193 ORDVC0404 Drill Vise Cross Type 4” 102 270 x 270 x 160 9.5
KW0400194 ORDVC0606 Drill Vise Cross Type 6” 152 320 x 320 x 180 16.7

TILTING DRILLING MACHINE VISE

Features :
• Cast iron construction
• Crank handles for adjusting vise front to back

Unit size
Width of Jaws Weight
Article No. Model No. Description (L x W x H)
(mm) (kg)
(mm)
Tilting Drilling Machine Vise
KW0400306 ORDVT0303 85 240 x 180 x 120 20
85mm, 80mm Opening
Tilting Drilling Machine Vise
KW0400307 ORDVT0404 115 250 x 215 x 140 27
115mm, 90mm Opening

TILTING MACHINE VISE

Features :
• Cast iron construction
• Crank handles for adjusting vise front to back

Unit size
Width of Jaws Weight
Article No. Model No. Description (L x W x H)
(mm) (kg)
(mm)
Tilting Machine Vise100mm,
KW0400315 ORTMV0403 100 335 x 195 x1 65 19
80mm Opening
Tilting Machine Vise125mm,
KW0400316 ORTMV0504 125 390 x 240 x 180 29
100mm Opening
Tilting Machine Vise160mm,
KW0400317 ORTMV0605 160 170 x 150 x 80 43
125mm Opening

10 Specification and product images may change without notice

HYDRAULIC MACHINE VISE

Features :
• Cast iron construction
• Crank handles for adjusting vise front to back

Unit size
Width of Weight
Article No. Model No. Description (L x W x H)
Jaws (mm) (kg)
(mm)
Hydraulic Machine Vise
KW0400046 ORMVH0404 108 450 x 160 x 250 28
175mm
Hydraulic Machine Vise
KW0400047 ORMVH0505 132 560 x 180 x 280 47
220mm
Hydraulic Machine Vise
KW0400048 ORMVH0606 151 640 x 340 x 210 63
300mm

STEEL CLAMPING KIT

Features :
• Heat treaded steel black with oxide finish.
• Block size 1” (25mm)

Unit size
Table Slot Weight
Article No. Description (L x W x H)
(Stud Size) (kg)
(mm)
Steel Clamping Kit
KW0400383 14 (M12 - 1.75P) 385 x 235 x 190 9.4
M12 x 1.75P (52pcs)
Steel Clamping Kit
KW0400370 16 (M14 - 2.0P) 450 x 130 x 220 11.1
M14 x 2.0P (52pcs)
Steel Clamping Kit
KW0400371 5/8 (1/2 - 12W) 450 x 130 x 221 10.4
1/2 - 12W (52pcs)
Steel Clamping Kit
KW0400284 18 (M16 - 20.P) 420 x 190 x 100 12.6
M16 x 2.0P (52pcs)

DRILL CHUCK ARBOR

Article No. Description Weight (kg)

KW0200217 Drill Chuck Arbor MT2 x B16 0.2
KW0200218 Drill Chuck Arbor MT2 x B18 0.21
KW0200219 Drill Chuck Arbor MT2 x JT3 0.24
KW0200220 Drill Chuck Arbor MT2 x JT33 0.24
KW0200221 Drill Chuck Arbor MT2 x JT6 0.22
10030270 Drill Chuck Arbor MT3 x JT3 3209-034 35
KW0200226 Drill Chuck Arbor MT3 x JT33 0.3
KW0201101 Drill Chuck Arbor MT3 x JT6 3209-030 0.4
KW0200223 Drill Chuck Arbor MT3 x B16 0.3
KW0200224 Drill Chuck Arbor MT3 x B18 0.4
10005096 Drill Chuck Arbor MT4 x JT3 3209-031A 0.7
KW0400521 Drill Chuck Arbor MT4 x JT6 3209-031 0.7
10027820 Drill Chuck Arbor MT5 x JT3 3209-032A 1.6
KW0400467 Drill Chuck Arbor MT5 x JT6 3209-032 1.6

Specification and product images may change without notice 11

 MORSE TAPER SLEEVE

Article No. Description Weight (kg)

KW0400748 Morse Taper Sleeve MT1 x MT2 3210-012 0.22
10003148 Morse Taper Sleeve MT1 x MT3 3210-011 0.2
KW0400749 Morse Taper Sleeve MT1 x MT4 3210-013 0.89
KW0400744 Morse Taper Sleeve MT2 x MT3 3210-001 0.5
KW0400519 Morse Taper Sleeve MT2 x MT4 3210-002 0.5
KW0400460 Morse Taper Sleeve MT2 x MT5 3210-003 1.4
KW0400522 Morse Taper Sleeve MT3 x MT4 3210-005 0.4
KW0400461 Morse Taper Sleeve MT3 x MT5 3210-006 1.3
KW0400921 Morse Taper Sleeve MT3 x MT6 3210-007 4
KW0400462 Morse Taper Sleeve MT4 x MT5 3210-008 1
KW0400922 Morse Taper Sleeve MT4 x MT6 3210-009 3.7
KW0400746 Morse Taper Sleeve MT5 x MT6 3210-010 2.9

KEY TYPE DRILL CHUCK

Features :
• Suitable for use on heavy duty and extra heavy duty
• For milling machine, lathe, drill machine and wood working machine

Weight
Article No. Description
(kg)
10522863 Key Type Drill Chuck 3 - 16mm J3, 3303 - 078A 0.96
KW0400919 Key Type Drill Chuck 1 - 13mm J6 3303 - 086 0.77

KEYLESS DRILL CHUCK

Features :
• Product of Grade M is used in high precision machine-tool, such as
machining center and digital control machine-tool

Weight
Article No. Description
(kg)
KW0400358 Keyless Drill Chuck 1 - 13mm JT6 3302 - 069 1.02
KW0400863 Keyless Drill Chuck 0 - 13mm B16 3302 - 071 1.03
10040817 Keyless Drill Chuck 3-16mm JT6, 3302 - 073 1.33
KW0400951 Keyless Drill Chuck 3-16mm JT3 3302 - 074 1.33

Weight
Article No. Description
(kg)
10029865 Keyless Drill Chuck 0.5 – 8mm MT2 3301 - 030 0.8
KW0400393 Keyless Drill Chuck 1 – 13mm MT3 3301 - 033 1.4
KW0400614 Keyless Drill Chuck 1 – 13mm MT4 3301 - 034 1.8
KW0400476 Keyless Drill Chuck 1 – 13mm NT40 3301 - 039 1.8

10029866 Keyless Drill Chuck 1 – 13mm BT30 3301 - 071 1.4

12 Specification and product images may change without notice

FACE MILL ARBOR

Features :
• Best selected quality tool steel hardened and precision
• High rigidity and accuracy

NT Shank MT Shank BT Shank

Article No. Description Weight (kg)

KW0400423 Face Mill Arbor MT3 D25.4mm 3212 - 016 0.7
KW0400263 Face Mill Arbor NT40 D25.4mm 3212 - 004 1.2
KW0400264 Face Mill Arbor NT40 D31.75mm 3212 - 005 1.5
KW0400609 Face Mill Arbor BT30 D25.4mm 3212 - 201 1
KW0400225 Face Mill Arbor BT40 D25.4mm 3212 - 203 1.6

COLLET CHUCK SET

Features :
• Best selected quality tool steel hardened and precision
• High rigidity and accuracy

MT NT BT Straight R8

• Please notify drawbar or pull stud size when ordering

Article No. Description Set Range (mm) Set Pieces (pcs) Weight (kg)
KW0400081 Collet Chuck Set MT3 ER32 3 - 20mm 3024 - 403 3 – 20 18 4.1
KW0400075 Collet Chuck Set NT40 ER32 4 - 20mm 3021 - 402 4 – 20 11 4.2
KW0400386 Collet Chuck Set BT30 ER32 4 - 20mm 3031 - 404 4 – 26 23 7.3
KW0400601 Collet Chuck Set BT40 ER32 6 - 20mm 3032 - 406 6 – 20 6 3.8

TOOL SETTING STAND

Features :
• Cast iron construction
• Excellent helping tools for simple, rapid and safe

10068253 10054664

Article No. Description Weight (kg)

10068253 Tool Setting Stand BT30 3405 - 010 11.9
10054664 Tool Setting Stand BT40 3405 - 011 12.4

Specification and product images may change without notice 13

 TOUCH POINT SENSOR ALLOY STEEL

KW0400094

Spindle runs When measuring When the probe KW0400095

about 500rpm. probe touches and shank are in
move spindle workpiece, it alignment, probe
closed to looks in one part will slide out of
measuring rotating center.
surface. Now, the center
spindle is located
5mm away from
measuring surface.

Article No. Description Material Weight (kg)

KW0400094 Touch Point Sensor Alloy Steel 3402 - 100 Alloy Steel 56 HRC 0.06
KW0400095 Touch Point Sensor Alloy Steel 3402 - 101 Alloy Steel 56 HRC 0.06

Z-ZERO SETTER

Features :
• Made of high grade steel
• Equipped with precision dial indicator

Height Weight
Article No. Description
(mm) (kg)
KW0400291 Z-Zero Setter Standart Type 3403 - 020 50 1.1

KW0400291
KW0400619 KW0400619 Z-Zero Setter 50mm with Magnetic 3403 - 022 50 1.1

LIGHT DUTY LIVE CENTER

KW0400627 KW0400844

Features : KW0400630
• Made of alloy steel under heat treatment
• Applicable for middle and high speed lathe with light load

Article No. Description Weight (kg) Packing size (L x W x H) (mm)

KW0400627 Light Duty Live Center MT4 5001 - 004 1.3 195 x 58 x 56
KW0400628 Light Duty Live Center MT5 5001 - 005 3.2 268 x 56 x 77
KW0400844 High Speed Nc Live Center MT4A 5001 - 021 2.2 253 x 92 x 80
KW0400776 High Speed Nc Live Center MT5A 5001 - 022 4.5 303 x 108 x 101
KW0400630 Inter-Change Live Center MT4 5001 - 042 2 255 x 138 x 100
KW0400516 Inter-Change Live Center MT5 5001 - 061 5.5 275 x 147 x 97

GROUND PARALLELS

Features :
• Made of high grade alloy steel hardened and ground
• Accuracy : 0.01mm

Article No. Description Weight (kg))

Precision Parallels 16 - 50mm
KW0400162 13
width 8mm (36pcs)
Ground Parallels 14 - 50mm
KW0400182 11
width 10mm (28pcs)

KW0400162 KW0400182

14 Specification and product images may change without notice

TOOL POST GRINDER ON LATHE
For Internal Grinding

Standard Accessories
1 Internal spindle
2 Pulley for internal grinding
3 Flat belt
4 Diamond tool
5 Holder for diamond tool
6 Key folds (8, 5, 3, 2mm)
Features :
• Both the main shafts have been specially designed, and the worldwide precision bearing is used to fit the main shafts which are made of alloy
steel heat-treated for high wear resistance, precision, as well as maintaning to the lowest temperature for durability and stability.
• The motor base and the spindle bushing are adjustable.
• The motor is well designed with a special and nice apperance, The R.P.M. Of this motor varied depending on the size of the workpiece

Article No. Description Weight (kg) Packing size (L x W x H) (mm)

KW0400491 Tool Post Grinder on Lathe 100, 5004 - 006 24 450 x 320 x 340
KW0400492 Tool Post Grinder on Lathe 125, 5004 - 005 35 520 x 430 x 350
KW0400288 Tool Post Grinder on Lathe 150, 5004 - 004 38 520 x 430 x 350
10122890 Tool Post Grinder on Lathe 165, 5004 - 003 48 520 x 430 x 350

PIPE THREADING MACHINE

Capacity Capacity Capacity

½ ~ 2” ½ ~ 3” ½ ~ 4”

10083577 10083579
10083578

Features :
• Use in BSPT size
• Center lock chuck

Article No 10083577 10083578 10083579

Threading MCH 1/2 – 2” BSPT 750W Threading MCH 1/2 – 3” BSPT 900W Threading MCH 1/2 – 4” BSPT 1100W
Description
220V 220V 220V
Specification
Threading capacity ½” - 2” ½” - 3” ½” - 4”
Motor (kW/V/Ph) 0.75 / 220 / 1 0.9 / 220 / 1 11 / 220 / 1
Speed (Rpm) 27 11 ; 24 10 ; 22
Dimension (mm) 610 x 450 x 1240 780 x 520 x 1270 910 x660 x 1300
Weight (kg) 86 130 160
Thread Dies
10083582 HSS Dies ½” - ¾” BSPT RT 10083585 HSS Dies ½” - ¾” BSPT CT 10083582 HSS Dies ½” – ¾”BSPT RT
10083586 HSS Dies 1” - 2” BSPT CT 10083583 HSS Dies 1” - 2”BSPT RT
10083583 HSS Dies 1” - 2” BSPT RT
RT Type CT Type 10083587 HSS Dies 2½” - 3” BSPT CT 10083584 HSS Dies 2 ½” – 4” BSPT CT
Die Head Die Head Quick-Opening Die Head Self-Opening
10083641 10083643
Die Head Self-Opening ½” - 2” T80 CT ½” - 2” T100 RT
10083640
½” - 2” T50 RT Die Head Quick-Opening Die Head Self-Opening
10083642 10083644
2½” - 3” T80 CT 2 ½” - 4” T100 CT
Cut Tip Blade
10083580 Cutting Blade T50 T80 10083580 Cutting Blade T50 T80 10083581 Cutting Blade T100

Specification and product images may change without notice 15

 DRILLING MACHINE

Features : Standard Accessories : Optional Accessories :

•Pulley system • Drill chuck • Drill vise
• Auto feeding • Key chuck • Steel clamping kit
• Better rigidity due to construction • Arbor punch • Morse taper sleeve

Article No. KW1500941

Model No. ORDF1642
Drilling Machine With Auto Feed Spindle
Description
16mm
Specification
Main Motor (kW / V / Ph) 0.75 / 380 / 3
Max. Drilling Cap 16mm
Max. Drilling Capacity (mm) 16
Diameter of Column (mm) 85
Spindle Stroke (mm) 100
Spindle Taper MT2
Spindle Speed (rpm) 290 - 2400
Distance Spindle Nose to Table (mm) 425
Working Area of Table (mm) 250 x 250
Working Area of Base (mm) 255 x 215
Dimension (L x W x H) (mm) 700 x 390 x 1040
Weight (kg) 108

Features : Standard Accessories : Optional Accessories :

•Pulley system • Drill chuck • Drill vise
• Auto feeding • Key chuck • Steel clamping kit
• Better rigidity due to construction • Arbor punch • Morse taper sleeve
• Coolant system

Article No. KW1500942

Model No. ORDF2568
Drilling Machine With Auto Feed Spindle
Description
25mm
Specification
Main Motor (kW / V / Ph) 1.5 / 380 / 3
Max. Drilling Cap 25mm Max. Drilling Capacity (mm) 25
Diameter of Column (mm) 102
Spindle Stroke (mm) 130
Spindle Taper MT3
Spindle Speed (rpm) 230 - 2160
Distance Spindle Nose to Table (mm) 680
Working Area of Table (mm) 330 x 380
Working Area of Base (mm) 300 x 320
Dimension (L x W x H) (mm) 820 x 490 x 1760
Weight (kg) 200

16 Specification and product images may change without notice

DRILLING AND TAPPING MACHINE

Features : Standard Accessories : Optional Accessories :

• Pulley system • Drill chuck • Drill vise
• Foot switch • Key chuck • Steel clamping kit
• Better rigidity due to construction • Arbor punch • Morse taper sleeve
• Auto reverse

Article No. KW1500868

Model No. ORDTR1634
Drilling and Tapping Machine 16mm M12
Description
Auto Reverse
Specification
Max. Drilling Cap 16mm Main Motor (kW / V / Ph) 0.75 / 380 / 3
Max. Tapping Cap M12
Max. Drilling Capacity (mm) 16
Max. Tapping Capacity (mm) M12
Diameter of Column (mm) 70
Spindle Stroke (mm) 100
Spindle Taper MT2
Spindle Speed (rpm) 320 - 2700
Distance Spindle Nose to Table (mm) 340
Working Area of Table (mm) 265 x 265
Working Area of Base (mm) 250 x 300
Dimension (L x W x H) (mm) 780 x 450 x 950
Weight (kg) 100

Article No. KW1500869

Model No. ORDTR1642
Drilling and Tapping Machine 16mm M16
Description
Auto Reverse
Specification
Max. Drilling Cap 16mm Main Motor (kW / V / Ph) 0.75 / 380 / 3
Max. Tapping Cap M16 Max. Drilling Capacity (mm) 16
Max. Tapping Capacity (mm) M16
Diameter of Column (mm) 85
Spindle Stroke (mm) 93
Spindle Taper MT2
Spindle Speed (rpm) 160 - 1820
Distance Spindle Nose to Table (mm) 425
Working Area of Table (mm) 320 x 320
Working Area of Base (mm) 250 x 250
Dimension (L x W x H) (mm) 790 x 460 x 1140
Weight (kg) 108

Article No. KW1500870

Model No. ORDTR2562
Drilling and Tapping Machine 25mm M24
Description
Auto Reverse
Specification
Main Motor (kW / V / Ph) 1.5 / 380 / 3
Max. Drilling Capacity (mm) 25
Max. Drilling Cap 25mm Max. Tapping Capacity (mm) M24
Max. Tapping Cap M24
Diameter of Column (mm) 102
Spindle Stroke (mm) 130
Spindle Taper MT3
Spindle Speed (rpm) 160 - 1880
Distance Spindle Nose to Table (mm) 620
Working Area of Table (mm) 330 x 380
Working Area of Base (mm) 300 x 320
Dimension (L x W x H) (mm) 890 x 490 x 1760
Weight (kg) 210

Specification and product images may change without notice 17

 COLOUMN DRILLING MACHINE

Features :
• Thin oil lubrication is available for drilling diameter 50mm, grease lubrication is available for others
• Superior quality of gears with hardened and lapped gears of surface
• Model of machine is electromagnetism clutch transmission feed

Standard Accessories : Optional Accessories :

• Tool shank adaptor • Diameter 6 - 16 mm collets
• Key type drill chuck • Collet shanks
• Wedge for taper shank tool • 125mm precision vise

Article No. 10538433 10538434

Coloumn Drilling Machine Coloumn Drilling Machine
Description
ZN5032A PRO ZN5050A PRO
Specification
Motor (kW / V / Ph) 1.2 / 380 / 3 2.2 / 380 / 3
Max. Drilling Capacity (mm) 32 50
Spindle Stroke (mm) 155 200
Spindle Taper MT4
Spindle Speed (rpm) 125 – 3030 54 – 1400
Working Area of Table (mm) 370 x 360 445 x 435
Diameter of Column (mm) 120 160
Dimension (L x W x H) (mm) 880 x 520 x 2220 940 x 680 x 2405
Weight (kg) 500 650
10538433

RADIAL DRILLING MACHINE

Features :
• Clamping and speed cahnge of spindle is archived by hydraulic
clamping system
• The spindle is automatical feed as well as micro feed (16 steps)
• The machine is mainly used to machining holes, such as drilling,reaming
and chambering etc.
• Arm can swivel ± 180°

Standard Accessories : Optional Accessories :

• Box table • Reducing sleeve
• Coolant system • Drift
• Foundation bolt • Tilting work table
• Tools

10538435

Article No. 10538435 10538436 10538437

Radial Drilling Machine Radial Drilling Machine Radial Drilling Machine
Description
Z3050X16/1 PRO Z3063X20/1 PRO Z3080X25/1 PRO
Specification
Motor (kW / V / Ph) 4 / 380 / 3 5.5 / 380 / 3 7.5 / 380 / 3
Max. Drilling Capacity (mm) 50 63 80
Travel of Spindle Head (mm) 1250 1550 2000
Spindle Stroke (mm) 315 400 450
Spindle Taper MT5 MT5 MT6
Spindle Speed (rpm) 25 – 2000 20 – 1600 16 – 1250
Number of Spindle Speed 12 16 16
Table Size (mm) 500 x 630 630 x 800 800 x 1000
Dimension (L x W x H) (mm) 2500 x 1070 x 2840 3080 x 1250 x 3400 3730 x 1400 x 4025
Weight (kg) 3500 7000 11000

18 Specification and product images may change without notice

MILLING, DRILLING MACHINE

• Milling 25mm
• Drilling 30mm
• Milling 20mm • Horizontal Milling Max. Milling Cap 20mm
• Drilling 30mm • NT40 Spindle Tapper Max. Drilling Cap 32mm
• MT3 Spindle Tapper Max. Tapping Cap M16

10482824 10033527 KW1500260

Features : Features KW1500260 :

• Pulley transmission (10482824) • Heavy duty
• Gear head transmission (10033527, KW1500260) • Clockwise & Counter clockwise revolution
• Power table feed (10033527)
• DRO included (10033527)

Article No. 10482824 10033527 KW1500260

Model No. OPVM1530 OPMMU30 OPMDT6003
Milling, Drilling Machine Milling, Drilling, Tapping
Description Universal Milling Machine
30mm With Stand Machine 32mm
Specification
Motor (kW / V / Ph) 1.5 / 220 / 1 1.5 / 380 / 3 1 / 380 / 3
Max. Drilling Capacity (mm) 30 32
Max. Milling Capacity (mm) 20 25 20
Spindle Stroke (mm) 120 130
Spindle Taper MT3 NT40 MT3
Working Area of Table (mm) 730 x 210 1000 x 240 585 x 190
Spindle Speed (rpm) 100 - 2080 60 - 1350 50 - 1250
Dimension (L x W x H) (mm) 950 x 760 x 1150 2270 x 1500 x 2100 1000 x 900 x 1900
Weight (kg) 280 900 310

Specification and product images may change without notice 19

 UNIVERSAL MILLING MACHINE

DRO (DIGITAL READOUT)

For Universal Milling Machine

X6332Z + DRO3A PRO
(10538426)

10538425

Standard Accessories : Optional Accessories :

• Drill chuck • Reduction sleeve • Inner hexagon spanner • Milling arbor • Air draw bar • Clamping kit set
• Spindle arbor • Draw bar • Machine vise • Crank handle • Universal dividing head • Z axis lifting motor
• Wedge shifter • Wrench • 1 Set milling collet • Horizontal / vertical rotary table • Slotting head

Features :
• The machine is with gear driven milling head and the spindle can be automatic feed
• Rectangular table guide ways with high stability
• Automatic feeds on X, Y axes. Motorized lifting and lowering of table on Z axis

Article No. 10538425 10538426

Universal Milling Machine Universal Milling Machine
Description
X6332Z PRO X6332Z + DRO3A PRO
Specification
Motor (kW / V / Ph) 2.2
Max. Drilling Capacity (mm) 30
Max. Milling Capacity (mm) 25
Spindle Stroke (mm) 120
Spindle Taper ISO40
Spindle Speed Vertical (rpm) 90-2000 (8)
Spindle Speed Horizontal (rpm) 40-1300 (12)
Working Area of Table (mm) 1320 x 320
Dimension (L x W x H) (mm) 1710 x 1720 x 2330
Weight (kg) 2000

20 Specification and product images may change without notice

UNIVERSAL MILLING MACHINE

DRO (DIGITAL READOUT) Standard Accessories :

• Drill chuck
• Spindle arbor
• Wedge shifter
• Reduction sleeve
• Draw bar
• Wrench
• Inner hexagon spanner
• Machine vise
• 1 Set milling collet
• Milling arbor
For Universal Milling Machine • Crank handle
X6328B + DRO3A PRO
(10538423) Optional Accessories :
• Air draw bar
• Universal dividing head
• Horizontal / vertical rotary table
• Clamping kit set
• Z axis lifting motor
• Slotting head
Features :
• It is with Taiwan 3HP Belt type milling head with high speed andspindle can automatic feed
10538422 • The machine head can swivel 45°
• X, Y axis automatic feed, Z axis with motorized lifting and lowering of table

Article No. 10538422 10538423

Universal Milling Machine Universal Milling Machine
Description
X6328B PRO X6328B + DRO3A PRO
Specification
Motor (kW / V / Ph) 2.2(V/H)
Max. Drilling Capacity (mm) 28
Max. Milling Capacity (mm) 20
Spindle Stroke (mm) 127
Spindle Taper ISO40
Spindle Speed Vertical (rpm) 66-4514/16 setps
Spindle Speed Horizontal (rpm) 40-1300/12steps
Working Area of Table (mm) 1120 x 260
Dimension (L x W x H) (mm) 1710 x 1720 x 2330
Weight (kg) 1550

VERTICAL MILLING MACHINE

Standard Accessories : Features :

• Milling collet chuck set • It is with Taiwan 3HP Belt type milling head with high speed and
• Clamping kits set manual feed spindle
• Dro 2 axes for X and Y axes • X axis power feed
• Power feed device for X axis
• Coolant pump and hose
• Oil collection tray Article No. 10538428
• Machine vise Vertical Milling Machine
Description
• Tools and tool box X6325 + DRO2A
• Machine lamp Specification
Motor (kW / V / Ph) 2.2
Optional Accessories : Working Area of Table (mm) 1270 x 254
• Air draw bar Table Loading (kg) 280
• Universal dividing head Spindle Stroke (mm) 127
• Horizontal / vertical Spindle Taper ISO30
rotary table Spindle Speed Vertical (rpm) 65-4500
• Clamping kit set Spindle Speed Horizontal (rpm) 90°
• Z axis lifting motor Dimension (L x W x H) (mm) 1710 x 1720 x 2330
• Slotting head Weight (kg) 2000

Specification and product images may change without notice 21

 BENCH LATHE MACHINE

DRO (DIGITAL READOUT)

• Provides a numerical display position

• Help prevent common error

Standard Accessories :
• Steady rest
• Follow rest
• Work lamp
• Face plate
• Reduce sleeve
• Dead centers
• Coolant system
• Full length splash guard and chip tray
• Three jaw self centering chuck
• Four jaw independent chuck
• Four station tool post
• Foot brake pedal
• Thread chasing dial
• Operation box with tools
• Operation manual
Features :
• Include with DRO (Digital Read Out)
• Pedal for braking system
• Tailstok sleeve and handwheel with adjustable precission scale

Article No. 10553116

Model No. OPLMU3610
Bench Lathe Machine
Description
360UX1000
Specification
Main Motor (kW / V / Ph) 2.2 / 380 / 3
Max. Swing Over Bed (mm) 370
Max. Swing Over Cross Slide (mm) 220
Max. Swing in Gap (mm) 505
Distance Between Center (mm) 1000
Bed Width (mm) 189
Inch Thread (TPI) 4 – 56
Metric Thread (mm) 0.4 – 7
Tool shank (mm) 16 x 16
Taper of Tailstock MT4
Dimension (mm) 1880 x 640 x 1360
N.W / GW (kg) 550 / 650

22 Specification and product images may change without notice

GAP BED LATHE MACHINE

Features :
• Hardened and ground bed guideways
• Main spindle running in an oil bath hardened and ground mounted
on 2 adjustable precision taper roller bearings
• Central lubrication at the bed slide

10550322

Standard Accessories :
• Steady rest
• Follow rest
• Work lamp
• Face plate
• Reduce sleeve
• Dead centers
• Coolant system
• Live center
• Full length splash guard and chip tray
• Three jaw self centering chuck
• Four jaw independent chuck
• Four station tool post
• Foot brake pedal
• Thread chasing dial
• Operation box with tools
• Operation manual

Features :
• Pedal for braking system 10538429

• Tailstok sleeve and handwheel with adjustable precission scale

Article No. 10550322 10538429

Model No. OPLM4210 OPLM4110C
Gap Bed Lathe Machine Gap Bed Lathe Machine
Description
420 x 1000mm C6241X1000
Specification
Main Motor (kW / V / Ph) 2.2 / 380 / 3 5.5 / 380 / 3
Max. Swing Over Bed (mm) 420 410
Max. Swing Over Cross Slide (mm) 250 220
Max. Swing in Gap (mm) 580 640
Distance Between Center (mm) 1000
Bed Width (mm) 250 300
Inch Thread (TPI) 2 - 72 2 – 112
Metric Thread (mm) 0.2-14 0.1 - 14
Tool shank 20 x 20 25 x 25
Taper of Tailstock MT4
Dimension 2060 x 900 x 1650 2250 x 1120 x 1620
N.W / GW (kg) 1160 / 1350 1580 / 1844

Specification and product images may change without notice 23

 GAP BED LATHE MACHINE

Features :
• Hypercoustic quenched and accurate grinded bedway
and dovetail of saddle
• Ø 58 mm spindle bore
• One piece cast iron base, with well rigidity

10538430
Standard Accessories :
• Steadyrest
• Followrest
• Worklamp
• Faceplate
• Reducesleeve
• Deadcenters
• Coolantsystem
• Live center
• Full length splash guard and chip tray
• Three jaw selfcentering chuck
• Four jaw independent chuck
• Four station tool post
• Foot brake pedal
• Thread chasing dial
• Operation boxwith tools
• Operationmanual
• Thread Chasing Dial

Optional Accessories :
• Digital Read Out (DRO)
• Tool post guard 10538431
• Chuck guard
• Taper turning attachment
• Quick change toolpost

Article No. 10538430 10538431

Model No. OPLM4115 OPLM5115
Gap Bed Lathe Machine Gap Bed Lathe Machine
Description
C6241X1500 C6251X1500
Specification
Main Motor (kW / V / Ph) 5.5 / 380 / 3 7.5 / 380 / 3
Max. Swing Over Bed (mm) 410 510
Max. Swing Over Cross Slide (mm) 220 305
Max. Swing in Gap (mm) 640 735
Distance Between Center (mm) 1000 1500
Bed Width (mm) 300 350
Inch Thread (TPI) 2 – 112 2 – 112
Metric Thread (mm) 0.1 - 14 0.2 - 14
Tool shank 25 x 25 25 x 25
Taper of Tailstock MT4 MT5
Dimension 2800 x 1120 x 1620 2850 x 1150 x 1430
N.W / GW (kg) 1745 / 2049 2335 / 2700

24 Specification and product images may change without notice

GAP BED LATHE MACHINE

Features :
• Hypercoustic quenched and accurate grinded bedway
and dovetail of saddle
• Ø 58 mm spindle bore
• One piece cast iron base, with well rigidity

Standard Accessories :
• Steadyrest • Coolantsystem • Four station tool post Optional Accessories :
• Followrest • Live center • Foot brake pedal • Digital Read Out (DRO)
• Worklamp • Full length splash guard and • Thread chasing dial • Tool post guard
• Faceplate chip tray • Operation boxwith tools • Chuck guard
• Reducesleeve • Three jaw selfcentering chuck • Operationmanual • Taper turning attachment
• Deadcenters • Four jaw independent chuck • Thread Chasing Dial • Quick change toolpost

Article No. 10538432

Model No. OPLM6620
Description Gap Bed Lathe Machine C6266x2000
Specification
Main Motor (kW / V / Ph) 7.5 / 380 / 3
Max. Swing Over Bed (mm) 660
Max. Swing Over Cross Slide (mm) 440
Max. Swing in Gap (mm) 900
Distance Between Center (mm) 2000
Bed Width (mm) 400
Inch Thread (TPI) 7/16-80
Metric Thread (mm) 0.45 - 120
Tool shank 25 x 25
Taper of Tailstock MT5
Dimension 3710 x 1230 x 1600
N.W / GW (kg) 3345 / 3835

Specification and product images may change without notice 25

 GRAVER GRINDER Features :
• Simple setting
• Fast & constant invariable grinding
• Highly efficient

Article No. 10119232

Model No. ORGG1201
Description Graver Grinder
Specification
Motor (kW / V / Ph) 0.25 / 220 / 1
Grinding Wheel Speed (rpm) 5000
Grinding Wheel Size (mm) Ø 100 x 50 x Ø 20
Clamping Range Collet (mm) Ø 1 – Ø 12
Travel Tool Holder (mm) 140
Dimension (L x W x H) (mm) 350 x 450 x 350
Weight (kg) 45

UNIVERSAL TOOL AND CUTTER GRINDER Features :

• Simple setting
• Fast & constant invariable grinding
• Highly efficient

Article No. 10119251

Model No. OPUG0601
Universal Cut and Tool Grinder
Description
Machine (1Motor)
Specification
Motor 1 (kW / V / Ph) 0.55 / 380 / 3
Grinding Wheel Size (mm) 150 x 32 x 5
Area of Operating Table (mm) 130 x 550
Longitudinal Travel of
150
The Operating Table (mm)
Horizontal Travel of
300
The Operating Table (mm)
10119251 Height of Head Holder (mm) 135
Dimension (L x W x H) (mm) 740 x 630 x 670
Weight (kg) 160

Article No. 10119252

Model No. OPUG0602
Universal Cut and Tool Grinder
Description
Machine (2Motor)
Specification
Motor 1 (kW / V / Ph) 0.55 / 380 / 3
Motor 2 (kW / V / Ph) 0.08 / 380 / 3
Grinding Wheel Size (mm) 150 x 32 x 16
Area of Operating Table (mm) 130 x 680
Longitudinal Travel of
150
The Operating Table (mm)
Horizontal Travel of
400
The Operating Table (mm)
Height of Head Holder (mm) 135
10119252 Dimension (L x W x H) (mm) 700 x 700 x 700
Weight (kg) 209
Optional Accessories:

Use for: Use for:

Use for:
- Resharpening End Mill Cutter - Resharpening Multifunctional
- Resharpening Ball Nose Cutter
- Resharpening Cutting Flute Edge Cutter and Tools
- Resharpening Cutting Flute
and Center Cutting Edge.
Edge and Radius Cutting Edge.
KW1500769 KW1500770 KW1500867

26 Specification and product images may change without notice

SITE TABLE SAW Optional Accessories:

Blade (10082120)
Features :
• Safety blade cover
• Tilting blade
• Extention table fits both left side & rear side handle and wheel for easy
transportation

Article No. 10051707

Model No. OPTS1201
Description Site Table Saw 12” 2.2kW 1PH
Specification
Motor Power (V/Hz/W) 220 / 50 / 2200
Circular Saw Size Ø 300(12”)
Max. Cutting 90º (mm) 85
Max. Cutting 45º (mm) 60
Main Table Size (mm) 800 x 550
Dimension (L x W x H) (mm) 1100 x 1150 x 1150
Weight (kg) 62

PANEL SAW

Features :
• Heavy duty panel saw
• Cutting of large panel up to 320cm
• Include scoring saw
Article No. 10051708
Model No. OPPS1203
Description Panel saw 12” 4 kW 3PH
Specification
Motor Power (V / Hz / W) 380 / 50 / 4000
Max. Thickness Workpiece 90º (mm) 95
Max. Thickness Workpiece 45º (mm) 55
Sliding Table Size (mm) 3200
Blade Tilt (º) 45º - 90º
Dimension (L x W x H) (mm) 3250 x 3150 x 900
Weight (kg) 550

Specification and product images may change without notice 27

 WOOD BANDSAW

16 22
12 inch inch
inch

10051709

Features :
• Safety switch in upper and lower doors
• Include mitre gauge and rip fence 10051710
• Tiliting table 10051711

Article No. 10051709 10051710 10051711

Model No. OPWB1201 OPWB1601 OPWB2203
Description Wood Bandsaw 12” 550W 1PH Bandsaw 16” 2.2KW 1PH Bandsaw 22” 3.5KW 3PH
Specification
Motor Power (V/Hz/W) 220 / 50 / 550 220 / 50 / 2200 380 / 50 / 3500
Bandsaw Wheel Dia (mm) (”) 300 (12”) 400 (16”) 550 (22”)
Max. Thickness Workpiece (mm) 180 375 550
Table Size (°) 500 x 400 535 x 485 700 x 485
Blade Size (mm) 2270 x 6-15 3050 x 6-20 3855 x 10 - 40
Dimension (L x W x H) (mm) 800 x 600 x 1640 800 x 740 x 1750 970 x 750 x 1970
Weight (kg) 77 150 310

THICKNESSER
Optional Accessories:

Features :
• Safety switch in upper and lower doors
• Include mitre gauge and rip fence
• Tiliting table
Spare Blade
10087784

Article No. 10051706

Model No. OPTH1618
Description Thicknesser 16” x 18” 3kW 1PH
Specification
Motor Power (V / Hz / W) 220 / 50 / 3000
Thicknessing Table Size (mm) 410 x 750
Max cutting depth (mm) 2
Max. Thickness Workpiece (mm) 220
Max. Width Workpiece (mm) 410 (16”)
Cutter Block Speed (rpm) 4050
Cutting Knife (pcs) 4
Dimension (L x W x H) (mm) 650 x 890 x 1020
Weight (kg) 230

28 Specification and product images may change without notice

PLANNER THICKNESSER

Optional Accessories:
Features :
• Fence tilts 45° for safe chamfering
operation
• Dual functions. Planer and
Thicknesser
• Quick adjustment lever Spare Blade
10087783

Article No. 10051705

Model No. OPPT1207
Planner and thicknesser 12” x 7”
Description
2.2kW 3PH
Specification
Motor Power (V / Hz / W) 380 / 50 / 2200
Planing Table Size (mm) 310 x 1285
Thicknessing Table Size (mm) 310 x 600
Max cutting depth (mm) 2
Max. thicknessing Width (mm) 310
Max. thicknessing Height (mm) 180
Cutter Block Speed (rpm) 2900
Cutting Knife (pcs) 3
Dimension (L x W x H) (mm) 1300 x 580 x 960
Weight (kg) 179

CHISEL MORTISER

Scale in both Two position Ratchet setting Cabinet stand

metric and depth stop handle
imperial system

Features :
• Quick-release vice
• Ratchet setting handle
• Include cabinet stand

Article No. 10051714

Model No. OPCM1601
Description Chisel Mortiser 750W 1PH
Specification
Motor Power (V / Hz / W) 220 / 50 / 750
Drill Chuck Capacity (mm) 3 - 16
Max. Mortising Depth (mm) 76
Chisel To Table (mm) 210
Spindle Speed (rpm) 1400
Table Size (mm) 400 x 150
Dimension (L x W x H) (mm) 400 x 460 x 1450
Weight (kg) 80

Specification and product images may change without notice 29

 SINGLE HORIZONTAL DRILL
Features :
• Made of cast iron body
• For heavy duty use
• 2 way rotation for curve shape

Article No. 10051713

Model No. OPHD1603
Description Single Horizontal Drill 2.2kW 3PH
Specification
Motor Power (V / Hz / W) 380 / 50 / 2200
Max Chuck Size (mm) 16
Speed (rpm) 2800
Max. Height (mm) 110
Max. Vertical Travel (mm) 175
Max Cross Travel (mm) 140
Table Size (mm) 460 x 190
Dimension (L x W x H) (mm) 600 x 700 x 1050
Weight (kg) 110

Optional Accessories:
WOOD COPY LATHE

Features : Wood Turning Chisel Set

• Duplicating device 10190556
• Variable speed
• Include stand

Article No. 10085498

Model No. OPCL1440
Wood Copy Lathe 550W
Description
1000mm
Specification
Motor Power (V / Hz / W) 220 / 50 / 550
Swing overbed (mm (Inch)) 350 (14)
Distance between center (mm (Inch) 1000 (40)
Variable Speed (50HZ) 500 –
Spindle speed (rpm)
2000
Max cutting travel (mm) 85
Head and tailstock taper (mm) MT2
Dimension (L x W x H) (mm) 1450 x 480 x 1220
Weight (kg) 80

SPINDLE MOULDER

Features :
• Safety switch in panel box
• Feed roller to smooth material feeding

Article No. 10051712

Model No. OPSM0803
Description Spindle Moulder 2.8kW 3PH
Specification
Motor Power (V / Hz / W) 380 / 50 / 2800
Max Spindle Size (mm) Ø 200
Spindle Bore (mm) Ø 30
Speed (rpm) 1800 / 3000 / 6000 / 9000
Max Thickness Workpiece (mm) 100
Table Size (mm) 640 x 710
Table Height (mm) 900
Dimension (L x W x H) (mm) 1200 x 1250 x 1300
Weight (kg) 170

Note: Spindle cutter not include

30 Specification and product images may change without notice

SPINDLE MOULDER ROUTER

Features :
• Alumuniun fence
• Cast iron table
• Speed read out Speed Read Out Changeable Spindle

Article No. 10121482

Model No. OPSM0601
Description Spindle Moulder Router 1500KW
Specification
Motor Power (V / Hz / W) 220 / 50 / 1500
"Interchangeable 30mm + router bit cutter
Spindle Diameter
spindle with 8mm + 12mm or 1/4" + 1/2" " two collet"
Table Size (mm) 600 x 400
Sliding Table (mm) 1000 x 218
Tool Diameter Max (mm) 150
Spindle Speed (rpm) 1400 / 4000 / 6000 / 8000
Dimension (L x W x H) (mm) 1200 x 1250 x 1300
Weight (kg) 100

OSCILATING SPINDLE SANDER

Features :
• Oscilating spindle
• Tilt table to 45°
• Compact design

Article No. 10051716

Model No. OPSS6001
Description Oscilating Spindle Sander 370W 1PH
Specification
Motor Power (V / Hz / W) 220 / 50 / 370
Spindle Size (mm) "Ø 51 x 140, Ø 38 x 140, Ø 38 x 87"
Oscilating Travel (mm) 24
Oscilating Per Minute (OPM) 60
Table Tilt (°) 0 - 45°
Table Size (mm) 370 x 370
Dimension (L x W x H) (mm) 450 x 450 x 1040
Weight (kg) 33

Specification and product images may change without notice 31

32 Specification and product images may change without notice