Scribd
Upload
57 views2 pages

Data Sheet Pcap Touch Overlays

The document describes two types of PCAP touch overlays that can be used to retrofit displays, video walls, TVs, and presentation boards with touch functionality. The two types are an overlay with PCAP sensors underneath a frame, and an overlay with a closed glass front and underlying frame. Both use a PCAP touch foil laminated behind the glass to detect touches through the glass. The overlay connects to a PC via USB to transmit the image and detect touches, allowing for immediate touch interaction on the display without additional software.

Uploaded by

Julioroncal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views2 pages

Data Sheet Pcap Touch Overlays

The document describes two types of PCAP touch overlays that can be used to retrofit displays, video walls, TVs, and presentation boards with touch functionality. The two types are an overlay with PCAP sensors underneath a frame, and an overlay with a closed glass front and underlying frame. Both use a PCAP touch foil laminated behind the glass to detect touches through the glass. The overlay connects to a PC via USB to transmit the image and detect touches, allowing for immediate touch interaction on the display without additional software.

Uploaded by

Julioroncal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PCAP ohne Versatz

Overlay with PC AP sensors PC AP Overlay with closed glass front

PCAP Touch Overlay


You want to retrofit a display, a video wall, a TV or presen- In both versions, a PCAP touch foil is laminated to the
tation boards with „touch“? Our touch overlays can be inside of the glass. Touches are recognized through the
tailored to fit different imaging types and application scena- glass. The glass and the frame both provide protection for
rios. Their flexible size proves to be a great advantage for the display and the sensors.
special formats.
The overlay can be mounted on a display with its pre-
The PCAP touch overlays are available in two versions that assembled brackets. The overlay is connected to the PC via
differ only in design. The Overlay with PCAP sensors USB cable, which then transmits the image to the display,
has a frame with internal glass panel. Unlike the IR overlay, where it is finally displayed.
it has only a minimal offset between the overlay frame and
the glass surface (due to the thickness of the frame). An operation of the computer by touch on the display is
possible immediately and without the installation of soft-
The second type has a closed glass front with under- ware. Finger and pen movements are processed extremely
lying overlay frame. The glass is provided with a frame fast and thus guarantee a smooth working.
print or passepartout.

Fig. 1 Data transfer between touch overlay and display

© Interactive Displays GmbH www.interactive-displays.de [email protected] Phone +49 69 8484 6414


PCAP Touch Overlay

Characteristics
• 2 types: Overlay with PCAP sensors or PCAP Overlay with closed glass front
• With closed glass front: IP65 from the front & black passe-partout (further colors optional)
• Touch detection via PCAP touch foil
• Scratches on the glass surface do not affect the touch sensitivity
• Overlays react when in contact with glass
• Exact touch recognition only with bare hand or touchable glove
• With protective glass made of toughened safety glass
• Optionally with laminated safety glass (LSG)
• Optional anti-reflective foil or anti-vandalism foil
• 4-point calibration, without drift
• More complex installation even on installed displays
• Alternative choice of a new, freely available display
• More expensive than infrared

Range of use
Retrofitting touch for displays
Digital signage
Interactive advertising space
Presentation areas in training and conference rooms
Visitor information systems (e.g. for bus and train, shopping malls, airports or museums)
Production halls
Check-in service
Fairs and exhibitions

Specifications
Multi-touch 10 simultaneous touch points
Dimensions Frame width: 25-35 mm (depending on the model), sizes: 24" to 65"
Technology Projected Capacitive (PCAP)
Activation / touch input no pressure necessary
Response times 5 ms
Operating systems all with HID-Touch support
Interface USB 2.0
Current consumption USB, 450 mA
Surroundings Operating: -20~70 °C, Storage: -40~85 °C, Humidity: 10~90 % RH (not condensing)
Certifications CE, ROHS

© Interactive Displays GmbH www.interactive-displays.de [email protected] Phone +49 69 8484 6414

You might also like