DIY (Mixing) Instruction:: You Will Need

This document provides instructions for mixing e-liquid, including the necessary materials, preparation steps, steeping process, tasting, and advice. The preparation involves filling a mixing bottle with a PG/VG base, shaking flavor bottles, adding flavoring at a percentage based on the base used, shaking vigorously, and letting it steep for 3 to 7 days. Steeping allows the flavors to develop over time, with higher VG bases requiring longer steeping. Once steeped, the liquid can be tasted, adding more flavor or diluting if needed. Advice includes starting with single flavors, using additives at 1-3%, labeling preparations, and making new recipes in small 10ml vials.

Uploaded by

salas20585

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

12 views2 pages

DIY (Mixing) Instruction:: You Will Need

Uploaded by

salas20585

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 2

DIY(mixing) instruction:

You will need:

• A ready-to-use PG/VG base
• Concentrated flavor (s)
• Optional: an additive (+/- sweet, +/- sour, balancing, sweet effect ...).
The preparation:
• Fill mixing bottle with your ready-to-use base;
• Shake your flavor bottles before use;
• Add flavoring (s):
✓ With a base 70/30 of PG / VG: 8%
✓ With a base 50/50 of PG / VG: 10%
✓ With a base 30/70 of PG / VG: 12%
✓ With a Full VG base: 15%

• Shake vigorously for 10 to 20 seconds and let it steep.

• Clean your equipment before using new flavor.
• Write down your recipe for later use or transmission.

Steeping:
Maturation is an unavoidable step, it is the period that corresponds to
the development of the flavors of an e-liquid preparation. Aroma does
not express itself immediately, recommended steeping from 3 to 7
days.

For optimum results, the mixing bottle should be shaken well after
preparation and a little every day to diffuse the aroma.
It should also be noted that the maturation time differs according to
the base used. The higher the vegetable glycerin content, the longer
the ripening time.

The tasting:
Once the maturation phase is over, your aroma is ready to be tasted. If
you find the flavor rendering too light you can add a few drops of
aromas and let it rest for 48 hours minimum. On the contrary if your
liquid is too strong you can dilute it by adding the base.
• Flavor is too strong – you need to dilute it: add base
• Not enough flavor - add a few drops of aroma

Advice:
• Start with a single flavor before considering blends of several flavors.
• For additives (optional), remain in proportions of 1 to 3% of your
basic liquid mixture + concentrated flavor (s), the additives being
generally very powerful.
• Label your preparations (aroma (s), dosage, nicotine level, production
date)
• Make your new recipes in 10 ml vials to allow for flavor or base
readjustments.