Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Silo Lifting Lug Weld Check (Shell To Lug) Jamtkraft Biofuel Vertical Weld

    Uploaded by

    anuj Singh
    The document provides calculations to check the welding of lifting lugs on a biofuel silo for a project in Jamtkraft. It details the dead load of the silo, number and arrangement of lifting lugs, and performs directional weld calculations using factors like yield strength, ultimate strength, and safety factors to determine weld utilization ratios. The weld calculations show utilization ratios of 0.82 and 0.58, indicating the weld size of 4mm is sufficient based on the specified loads and parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Silo Lifting Lug Weld Check (Shell To Lug) Jamtkraft Biofuel Vertical Weld

    Uploaded by

    anuj Singh
    21 views1 page
    The document provides calculations to check the welding of lifting lugs on a biofuel silo for a project in Jamtkraft. It details the dead load of the silo, number and arrangement of lifting lugs, and performs directional weld calculations using factors like yield strength, ultimate strength, and safety factors to determine weld utilization ratios. The weld calculations show utilization ratios of 0.82 and 0.58, indicating the weld size of 4mm is sufficient based on the specified loads and parameters.

    Original Title

    Silo Lifting Lug Weld Check (shell to lug) Jamtkraft Biofuel Vertical Weld

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides calculations to check the welding of lifting lugs on a biofuel silo for a project in Jamtkraft. It details the dead load of the silo, number and arrangement of lifting lugs, and performs directional weld calculations using factors like yield strength, ultimate strength, and safety factors to determine weld utilization ratios. The weld calculations show utilization ratios of 0.82 and 0.58, indicating the weld size of 4mm is sufficient based on the specified loads and parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    Silo Lifting Lug Weld Check (Shell To Lug) Jamtkraft Biofuel Vertical Weld

    Uploaded by

    anuj Singh
    The document provides calculations to check the welding of lifting lugs on a biofuel silo for a project in Jamtkraft. It details the dead load of the silo, number and arrangement of lifting lugs, and performs directional weld calculations using factors like yield strength, ultimate strength, and safety factors to determine weld utilization ratios. The weld calculations show utilization ratios of 0.82 and 0.58, indicating the weld size of 4mm is sufficient based on the specified loads and parameters.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    ISGEC SFW BOILERS PVT. LTD.

    Project JAMTKRAFT

    Part Fuel Silo Lifting Lug DATE

    Weld Check For Biofuel Silo Lifting Lug Arrangement 21-11-2023


    𝐹𝑁
    Factored Dead Load of Silo FTotal 34921.935 kg
    342584.1824 N
    𝐹
    No. of Lifting lugs 4
    No. of Lifting Lugs Considered 2

    Lifting Load Considered F 171292.0912


    Width of Lug = Length of Weld Lv 90 mm 𝛼
    𝐹𝑣
    Size of weld Provided a 4 mm
    Angle of Lifting α 60 Deg

    Shearing Force Fv 0.00 N


    Normal Force FN 148343.30 N

    Yeild Strength of Plate fy 355 MPa


    𝐿𝑣
    Ultimate Strength of Plate fu 490 MPa
    Correlation Factor 0.9
    Partial Safety Factor 1.25

    DIRECTIONAL METHOD OF WELD CALCULATION:

    Condition 1:

    0.00

    206.03

    356.86

    435.56

    Utilization Ratio 0.82

    Condition 2:

    206.03

    352.8

    Utilization Ratio 0.58

    You might also like